Skip to content

L
linux
Commit 5434c913 authored by Lothar Waßmann's avatar Lothar Waßmann Committed by Shawn Guo
Browse files
Options

ARM: dts: imx6ul: add support for Ka-Ro electronics TXUL modules 

The TXUL-0010/-0011 modules are Computers On Module manufactured by
  Ka-Ro electronics GmbH with the following characteristics:
  Processor    Freescale i.MX 6UltraLite MCIMX6G2, 528 MHz
  RAM          256MB 16-bit DDR3 SDRAM
  ROM          128MB NAND Flash (TXUL-0010) / 4GB eMMC (TXUL-0011)
  Power supply Single 3.3 to 5V
  Size         26mm SO-DIMM
  Temp. Range  -40°C to 85°C
Signed-off-by: default avatarLothar Waßmann <LW@KARO-electronics.de>
Signed-off-by: default avatarShawn Guo <shawnguo@kernel.org>
parent f55532a0
Hide whitespace changes
Inline Side-by-side
Showing with 1097 additions and 1 deletion
arch/arm/boot/dts/Makefile
View file @ 5434c913
......@@ -374,7 +374,9 @@ dtb-$(CONFIG_SOC_IMX6SX) += \
imx6sx-sdb-reva.dtb \
imx6sx-sdb.dtb
dtb-$(CONFIG_SOC_IMX6UL) += \
imx6ul-14x14-evk.dtb
imx6ul-14x14-evk.dtb \
imx6ul-tx6ul-0010.dtb \
imx6ul-tx6ul-0011.dtb
dtb-$(CONFIG_SOC_IMX7D) += \
imx7d-cl-som-imx7.dtb \
imx7d-sbc-imx7.dtb \
......
arch/arm/boot/dts/imx6ul-tx6ul-0010.dts 0 → 100644
View file @ 5434c913
/*
* Copyright 2015 Lothar Waßmann <LW@KARO-electronics.de>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*
* This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
#include "imx6ul.dtsi"
#include "imx6ul-tx6ul.dtsi"
/ {
model = "Ka-Ro electronics TXUL-0010 Module";
compatible = "karo,imx6ul-tx6ul", "fsl,imx6ul";
aliases {
/delete-property/ mmc1;
};
};
arch/arm/boot/dts/imx6ul-tx6ul-0011.dts 0 → 100644
View file @ 5434c913
/*
* Copyright 2015 Lothar Waßmann <LW@KARO-electronics.de>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*
* This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
#include "imx6ul.dtsi"
#include "imx6ul-tx6ul.dtsi"
/ {
model = "Ka-Ro electronics TXUL-0011 Module";
compatible = "karo,imx6ul-tx6ul", "fsl,imx6ul";
aliases {
mmc0 = &usdhc2;
mmc1 = &usdhc1;
};
};
&gpmi {
status = "disabled";
};
&usdhc2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc2>;
bus-width = <4>;
no-1-8-v;
non-removable;
fsl,wp-controller;
status = "okay";
};
arch/arm/boot/dts/imx6ul-tx6ul.dtsi 0 → 100644
View file @ 5434c913
/*
* Copyright 2015 Lothar Waßmann <LW@KARO-electronics.de>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*
* This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/pwm/pwm.h>
/ {
aliases {
can0 = &can2;
can1 = &can1;
display = &display;
i2c0 = &i2c2;
i2c1 = &i2c_gpio;
i2c2 = &i2c1;
i2c3 = &i2c3;
i2c4 = &i2c4;
lcdif_23bit_pins_a = &pinctrl_disp0_1;
lcdif_24bit_pins_a = &pinctrl_disp0_2;
pwm0 = &pwm5;
reg_can_xcvr = &reg_can_xcvr;
serial2 = &uart5;
serial4 = &uart3;
spi0 = &ecspi2;
spi1 = &spi_gpio;
stk5led = &user_led;
usbh1 = &usbotg2;
usbotg = &usbotg1;
};
chosen {
stdout-path = &uart1;
};
memory {
reg = <0 0>; /* will be filled by U-Boot */
};
clocks {
mclk: mclk {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <26000000>;
};
};
backlight: backlight {
compatible = "pwm-backlight";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_lcd_rst>;
enable-gpios = <&gpio3 4 GPIO_ACTIVE_HIGH>;
pwms = <&pwm5 0 500000 PWM_POLARITY_INVERTED>;
power-supply = <&reg_lcd_pwr>;
/*
* a poor man's way to create a 1:1 relationship between
* the PWM value and the actual duty cycle
*/
brightness-levels = < 0 1 2 3 4 5 6 7 8 9
10 11 12 13 14 15 16 17 18 19
20 21 22 23 24 25 26 27 28 29
30 31 32 33 34 35 36 37 38 39
40 41 42 43 44 45 46 47 48 49
50 51 52 53 54 55 56 57 58 59
60 61 62 63 64 65 66 67 68 69
70 71 72 73 74 75 76 77 78 79
80 81 82 83 84 85 86 87 88 89
90 91 92 93 94 95 96 97 98 99
100>;
default-brightness-level = <50>;
};
i2c_gpio: i2c-gpio {
compatible = "i2c-gpio";
#address-cells = <1>;
#size-cells = <0>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c_gpio>;
gpios = <
&gpio5 1 GPIO_ACTIVE_HIGH /* SDA */
&gpio5 0 GPIO_ACTIVE_HIGH /* SCL */
>;
clock-frequency = <400000>;
status = "okay";
ds1339: rtc@68 {
compatible = "dallas,ds1339";
reg = <0x68>;
status = "disabled";
};
};
leds {
compatible = "gpio-leds";
user_led: user {
label = "Heartbeat";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_led>;
gpios = <&gpio5 9 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "heartbeat";
};
};
reg_3v3_etn: regulator-3v3etn {
compatible = "regulator-fixed";
regulator-name = "3V3_ETN";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_etnphy_power>;
gpio = <&gpio5 7 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
reg_2v5: regulator-2v5 {
compatible = "regulator-fixed";
regulator-name = "2V5";
regulator-min-microvolt = <2500000>;
regulator-max-microvolt = <2500000>;
regulator-always-on;
};
reg_3v3: regulator-3v3 {
compatible = "regulator-fixed";
regulator-name = "3V3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
reg_can_xcvr: regulator-canxcvr {
compatible = "regulator-fixed";
regulator-name = "CAN XCVR";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_flexcan_xcvr>;
gpio = <&gpio3 5 GPIO_ACTIVE_HIGH>;
enable-active-low;
};
reg_lcd_pwr: regulator-lcdpwr {
compatible = "regulator-fixed";
regulator-name = "LCD POWER";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_lcd_pwr>;
gpio = <&gpio5 4 GPIO_ACTIVE_HIGH>;
enable-active-high;
regulator-boot-on;
regulator-always-on;
};
reg_usbh1_vbus: regulator-usbh1vbus {
compatible = "regulator-fixed";
regulator-name = "usbh1_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usbh1_vbus &pinctrl_usbh1_oc>;
gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
reg_usbotg_vbus: regulator-usbotgvbus {
compatible = "regulator-fixed";
regulator-name = "usbotg_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usbotg_vbus &pinctrl_usbotg_oc>;
gpio = <&gpio1 26 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
spi_gpio: spi-gpio {
#address-cells = <1>;
#size-cells = <0>;
compatible = "spi-gpio";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi_gpio>;
gpio-mosi = <&gpio1 30 GPIO_ACTIVE_HIGH>;
gpio-miso = <&gpio1 31 GPIO_ACTIVE_HIGH>;
gpio-sck = <&gpio1 28 GPIO_ACTIVE_HIGH>;
num-chipselects = <2>;
cs-gpios = <
&gpio1 29 GPIO_ACTIVE_HIGH
&gpio1 10 GPIO_ACTIVE_HIGH
>;
status = "disabled";
spi@0 {
compatible = "spidev";
reg = <0>;
spi-max-frequency = <660000>;
};
spi@1 {
compatible = "spidev";
reg = <1>;
spi-max-frequency = <660000>;
};
};
sound {
compatible = "karo,imx6ul-tx6ul-sgtl5000",
"simple-audio-card";
simple-audio-card,name = "imx6ul-tx6ul-sgtl5000-audio";
simple-audio-card,format = "i2s";
simple-audio-card,bitclock-master = <&codec_dai>;
simple-audio-card,frame-master = <&codec_dai>;
simple-audio-card,widgets =
"Microphone", "Mic Jack",
"Line", "Line In",
"Line", "Line Out",
"Headphone", "Headphone Jack";
simple-audio-card,routing =
"MIC_IN", "Mic Jack",
"Mic Jack", "Mic Bias",
"Headphone Jack", "HP_OUT";
cpu_dai: simple-audio-card,cpu {
sound-dai = <&sai2>;
};
codec_dai: simple-audio-card,codec {
sound-dai = <&sgtl5000>;
};
};
};
&can1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_flexcan1>;
xceiver-supply = <&reg_can_xcvr>;
status = "okay";
};
&can2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_flexcan2>;
xceiver-supply = <&reg_can_xcvr>;
status = "okay";
};
&ecspi2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi2>;
fsl,spi-num-chipselects = <2>;
cs-gpios = <
&gpio1 29 GPIO_ACTIVE_HIGH
&gpio1 10 GPIO_ACTIVE_HIGH
>;
status = "disabled";
spidev0: spi@0 {
compatible = "spidev";
reg = <0>;
spi-max-frequency = <60000000>;
};
spidev1: spi@1 {
compatible = "spidev";
reg = <1>;
spi-max-frequency = <60000000>;
};
};
&fec1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_enet1 &pinctrl_enet1_mdio &pinctrl_etnphy0_rst>;
phy-mode = "rmii";
phy-reset-gpios = <&gpio5 6 GPIO_ACTIVE_HIGH>;
phy-supply = <&reg_3v3_etn>;
phy-handle = <&etnphy0>;
status = "okay";
mdio {
#address-cells = <1>;
#size-cells = <0>;
etnphy0: ethernet-phy@0 {
compatible = "ethernet-phy-ieee802.3-c22";
reg = <0>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_etnphy0_int>;
interrupt-parent = <&gpio5>;
interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
status = "okay";
};
etnphy1: ethernet-phy@2 {
compatible = "ethernet-phy-ieee802.3-c22";
reg = <2>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_etnphy1_int>;
interrupt-parent = <&gpio4>;
interrupts = <27 IRQ_TYPE_EDGE_FALLING>;
status = "okay";
};
};
};
&fec2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_enet2 &pinctrl_etnphy1_rst>;
phy-mode = "rmii";
phy-reset-gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>;
phy-supply = <&reg_3v3_etn>;
phy-handle = <&etnphy1>;
status = "disabled";
};
&gpmi {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpmi_nand>;
nand-on-flash-bbt;
fsl,no-blockmark-swap;
status = "okay";
};
&i2c2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c2>;
clock-frequency = <400000>;
status = "okay";
sgtl5000: codec@0a {
compatible = "fsl,sgtl5000";
reg = <0x0a>;
#sound-dai-cells = <0>;
VDDA-supply = <&reg_2v5>;
VDDIO-supply = <&reg_3v3>;
clocks = <&mclk>;
};
polytouch: polytouch@38 {
compatible = "edt,edt-ft5x06";
reg = <0x38>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_edt_ft5x06>;
interrupt-parent = <&gpio5>;
interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
reset-gpios = <&gpio5 3 GPIO_ACTIVE_LOW>;
wake-gpios = <&gpio5 8 GPIO_ACTIVE_HIGH>;
wakeup-source;
};
touchscreen: touchscreen@48 {
compatible = "ti,tsc2007";
reg = <0x48>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_tsc2007>;
interrupt-parent = <&gpio3>;
interrupts = <26 IRQ_TYPE_NONE>;
gpios = <&gpio3 26 GPIO_ACTIVE_LOW>;
ti,x-plate-ohms = <660>;
wakeup-source;
};
};
&kpp {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_kpp>;
/* sample keymap */
/* row/col 0..3 are mapped to KPP row/col 4..7 */
linux,keymap = <
MATRIX_KEY(4, 4, KEY_POWER)
MATRIX_KEY(4, 5, KEY_KP0)
MATRIX_KEY(4, 6, KEY_KP1)
MATRIX_KEY(4, 7, KEY_KP2)
MATRIX_KEY(5, 4, KEY_KP3)
MATRIX_KEY(5, 5, KEY_KP4)
MATRIX_KEY(5, 6, KEY_KP5)
MATRIX_KEY(5, 7, KEY_KP6)
MATRIX_KEY(6, 4, KEY_KP7)
MATRIX_KEY(6, 5, KEY_KP8)
MATRIX_KEY(6, 6, KEY_KP9)
>;
status = "okay";
};
&lcdif {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_disp0_1>;
lcd-supply = <&reg_lcd_pwr>;
display = <&display>;
status = "okay";
display: display@di0 {
bits-per-pixel = <32>;
bus-width = <24>;
status = "okay";
display-timings {
VGA {
clock-frequency = <25200000>;
hactive = <640>;
vactive = <480>;
hback-porch = <48>;
hsync-len = <96>;
hfront-porch = <16>;
vback-porch = <31>;
vsync-len = <2>;
vfront-porch = <12>;
hsync-active = <0>;
vsync-active = <0>;
de-active = <1>;
pixelclk-active = <1>;
};
ETV570 {
clock-frequency = <25200000>;
hactive = <640>;
vactive = <480>;
hback-porch = <114>;
hsync-len = <30>;
hfront-porch = <16>;
vback-porch = <32>;
vsync-len = <3>;
vfront-porch = <10>;
hsync-active = <0>;
vsync-active = <0>;
de-active = <1>;
pixelclk-active = <1>;
};
ET0350 {
clock-frequency = <6413760>;
hactive = <320>;
vactive = <240>;
hback-porch = <34>;
hsync-len = <34>;
hfront-porch = <20>;
vback-porch = <15>;
vsync-len = <3>;
vfront-porch = <4>;
hsync-active = <0>;
vsync-active = <0>;
de-active = <1>;
pixelclk-active = <1>;
};
ET0430 {
clock-frequency = <9009000>;
hactive = <480>;
vactive = <272>;
hback-porch = <2>;
hsync-len = <41>;
hfront-porch = <2>;
vback-porch = <2>;
vsync-len = <10>;
vfront-porch = <2>;
hsync-active = <0>;
vsync-active = <0>;
de-active = <1>;
pixelclk-active = <0>;
};
ET0500 {
clock-frequency = <33264000>;
hactive = <800>;
vactive = <480>;
hback-porch = <88>;
hsync-len = <128>;
hfront-porch = <40>;
vback-porch = <33>;
vsync-len = <2>;
vfront-porch = <10>;
hsync-active = <0>;
vsync-active = <0>;
de-active = <1>;
pixelclk-active = <1>;
};
ET0700 { /* same as ET0500 */
clock-frequency = <33264000>;
hactive = <800>;
vactive = <480>;
hback-porch = <88>;
hsync-len = <128>;
hfront-porch = <40>;
vback-porch = <33>;
vsync-len = <2>;
vfront-porch = <10>;
hsync-active = <0>;
vsync-active = <0>;
de-active = <1>;
pixelclk-active = <1>;
};
ETQ570 {
clock-frequency = <6596040>;
hactive = <320>;
vactive = <240>;
hback-porch = <38>;
hsync-len = <30>;
hfront-porch = <30>;
vback-porch = <16>;
vsync-len = <3>;
vfront-porch = <4>;
hsync-active = <0>;
vsync-active = <0>;
de-active = <1>;
pixelclk-active = <1>;
};
};
};
};
&pwm5 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm5>;
#pwm-cells = <3>;
status = "okay";
};
&sai2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_sai2>;
status = "okay";
};
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1 &pinctrl_uart1_rtscts>;
fsl,uart-has-rtscts;
status = "okay";
};
&uart2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart2 &pinctrl_uart2_rtscts>;
fsl,uart-has-rtscts;
status = "okay";
};
&uart5 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart5 &pinctrl_uart5_rtscts>;
fsl,uart-has-rtscts;
status = "okay";
};
&usbotg1 {
vbus-supply = <&reg_usbotg_vbus>;
dr_mode = "peripheral";
disable-over-current;
status = "okay";
};
&usbotg2 {
vbus-supply = <&reg_usbh1_vbus>;
dr_mode = "host";
disable-over-current;
status = "okay";
};
&usdhc1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc1 &pinctrl_usdhc1_cd>;
bus-width = <4>;
no-1-8-v;
cd-gpios = <&gpio4 14 GPIO_ACTIVE_LOW>;
fsl,wp-controller;
status = "okay";
};
&iomuxc {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_hog>;
pinctrl_hog: hoggrp {
};
pinctrl_led: ledgrp {
fsl,pins = <
MX6UL_PAD_SNVS_TAMPER9__GPIO5_IO09 0x0b0b0 /* LED */
>;
};
pinctrl_disp0_1: disp0grp-1 {
fsl,pins = <
MX6UL_PAD_LCD_CLK__LCDIF_CLK 0x10 /* LSCLK */
MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE 0x10 /* OE_ACD */
MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC 0x10 /* HSYNC */
MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC 0x10 /* VSYNC */
/* PAD DISP0_DAT0 is used for the Flexcan transceiver control on STK5-v5 */
MX6UL_PAD_LCD_DATA01__LCDIF_DATA01 0x10
MX6UL_PAD_LCD_DATA02__LCDIF_DATA02 0x10
MX6UL_PAD_LCD_DATA03__LCDIF_DATA03 0x10
MX6UL_PAD_LCD_DATA04__LCDIF_DATA04 0x10
MX6UL_PAD_LCD_DATA05__LCDIF_DATA05 0x10
MX6UL_PAD_LCD_DATA06__LCDIF_DATA06 0x10
MX6UL_PAD_LCD_DATA07__LCDIF_DATA07 0x10
MX6UL_PAD_LCD_DATA08__LCDIF_DATA08 0x10
MX6UL_PAD_LCD_DATA09__LCDIF_DATA09 0x10
MX6UL_PAD_LCD_DATA10__LCDIF_DATA10 0x10
MX6UL_PAD_LCD_DATA11__LCDIF_DATA11 0x10
MX6UL_PAD_LCD_DATA12__LCDIF_DATA12 0x10
MX6UL_PAD_LCD_DATA13__LCDIF_DATA13 0x10
MX6UL_PAD_LCD_DATA14__LCDIF_DATA14 0x10
MX6UL_PAD_LCD_DATA15__LCDIF_DATA15 0x10
MX6UL_PAD_LCD_DATA16__LCDIF_DATA16 0x10
MX6UL_PAD_LCD_DATA17__LCDIF_DATA17 0x10
MX6UL_PAD_LCD_DATA18__LCDIF_DATA18 0x10
MX6UL_PAD_LCD_DATA19__LCDIF_DATA19 0x10
MX6UL_PAD_LCD_DATA20__LCDIF_DATA20 0x10
MX6UL_PAD_LCD_DATA21__LCDIF_DATA21 0x10
MX6UL_PAD_LCD_DATA22__LCDIF_DATA22 0x10
MX6UL_PAD_LCD_DATA23__LCDIF_DATA23 0x10
>;
};
pinctrl_disp0_2: disp0grp-2 {
fsl,pins = <
MX6UL_PAD_LCD_CLK__LCDIF_CLK 0x10 /* LSCLK */
MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE 0x10 /* OE_ACD */
MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC 0x10 /* HSYNC */
MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC 0x10 /* VSYNC */
MX6UL_PAD_LCD_DATA00__LCDIF_DATA00 0x10
MX6UL_PAD_LCD_DATA01__LCDIF_DATA01 0x10
MX6UL_PAD_LCD_DATA02__LCDIF_DATA02 0x10
MX6UL_PAD_LCD_DATA03__LCDIF_DATA03 0x10
MX6UL_PAD_LCD_DATA04__LCDIF_DATA04 0x10
MX6UL_PAD_LCD_DATA05__LCDIF_DATA05 0x10
MX6UL_PAD_LCD_DATA06__LCDIF_DATA06 0x10
MX6UL_PAD_LCD_DATA07__LCDIF_DATA07 0x10
MX6UL_PAD_LCD_DATA08__LCDIF_DATA08 0x10
MX6UL_PAD_LCD_DATA09__LCDIF_DATA09 0x10
MX6UL_PAD_LCD_DATA10__LCDIF_DATA10 0x10
MX6UL_PAD_LCD_DATA11__LCDIF_DATA11 0x10
MX6UL_PAD_LCD_DATA12__LCDIF_DATA12 0x10
MX6UL_PAD_LCD_DATA13__LCDIF_DATA13 0x10
MX6UL_PAD_LCD_DATA14__LCDIF_DATA14 0x10
MX6UL_PAD_LCD_DATA15__LCDIF_DATA15 0x10
MX6UL_PAD_LCD_DATA16__LCDIF_DATA16 0x10
MX6UL_PAD_LCD_DATA17__LCDIF_DATA17 0x10
MX6UL_PAD_LCD_DATA18__LCDIF_DATA18 0x10
MX6UL_PAD_LCD_DATA19__LCDIF_DATA19 0x10
MX6UL_PAD_LCD_DATA20__LCDIF_DATA20 0x10
MX6UL_PAD_LCD_DATA21__LCDIF_DATA21 0x10
MX6UL_PAD_LCD_DATA22__LCDIF_DATA22 0x10
MX6UL_PAD_LCD_DATA23__LCDIF_DATA23 0x10
>;
};
pinctrl_ecspi2: ecspi2grp {
fsl,pins = <
MX6UL_PAD_UART4_RX_DATA__GPIO1_IO29 0x0b0b0 /* CSPI_SS */
MX6UL_PAD_JTAG_MOD__GPIO1_IO10 0x0b0b0 /* CSPI_SS */
MX6UL_PAD_UART5_TX_DATA__ECSPI2_MOSI 0x0b0b0 /* CSPI_MOSI */
MX6UL_PAD_UART5_RX_DATA__ECSPI2_MISO 0x0b0b0 /* CSPI_MISO */
MX6UL_PAD_UART4_TX_DATA__ECSPI2_SCLK 0x0b0b0 /* CSPI_SCLK */
>;
};
pinctrl_edt_ft5x06: edt-ft5x06grp {
fsl,pins = <
MX6UL_PAD_SNVS_TAMPER2__GPIO5_IO02 0x1b0b0 /* Interrupt */
MX6UL_PAD_SNVS_TAMPER3__GPIO5_IO03 0x1b0b0 /* Reset */
MX6UL_PAD_SNVS_TAMPER8__GPIO5_IO08 0x1b0b0 /* Wake */
>;
};
pinctrl_enet1: enet1grp {
fsl,pins = <
MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00 0x000b0
MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01 0x000b0
MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN 0x000b0
MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER 0x000b0
MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN 0x000b0
MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00 0x000b0
MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01 0x000b0
MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1 0x400000b1
>;
};
pinctrl_enet2: enet2grp {
fsl,pins = <
MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00 0x000b0
MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01 0x000b0
MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN 0x000b0
MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER 0x000b0
MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN 0x000b0
MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00 0x000b0
MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01 0x000b0
MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2 0x400000b1
>;
};
pinctrl_enet1_mdio: enet1-mdiogrp {
fsl,pins = <
MX6UL_PAD_GPIO1_IO07__ENET1_MDC 0x0b0b0
MX6UL_PAD_GPIO1_IO06__ENET1_MDIO 0x1b0b0
>;
};
pinctrl_etnphy_power: etnphy-pwrgrp {
fsl,pins = <
MX6UL_PAD_SNVS_TAMPER7__GPIO5_IO07 0x0b0b0 /* ETN PHY POWER */
>;
};
pinctrl_etnphy0_int: etnphy-intgrp-0 {
fsl,pins = <
MX6UL_PAD_SNVS_TAMPER5__GPIO5_IO05 0x0b0b0 /* ETN PHY INT */
>;
};
pinctrl_etnphy0_rst: etnphy-rstgrp-0 {
fsl,pins = <
MX6UL_PAD_SNVS_TAMPER6__GPIO5_IO06 0x0b0b0 /* ETN PHY RESET */
>;
};
pinctrl_etnphy1_int: etnphy-intgrp-1 {
fsl,pins = <
MX6UL_PAD_CSI_DATA06__GPIO4_IO27 0x0b0b0 /* ETN PHY INT */
>;
};
pinctrl_etnphy1_rst: etnphy-rstgrp-1 {
fsl,pins = <
MX6UL_PAD_CSI_DATA07__GPIO4_IO28 0x0b0b0 /* ETN PHY RESET */
>;
};
pinctrl_flexcan1: flexcan1grp {
fsl,pins = <
MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX 0x0b0b0
MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX 0x0b0b0
>;
};
pinctrl_flexcan2: flexcan2grp {
fsl,pins = <
MX6UL_PAD_UART2_CTS_B__FLEXCAN2_TX 0x0b0b0
MX6UL_PAD_UART2_RTS_B__FLEXCAN2_RX 0x0b0b0
>;
};
pinctrl_flexcan_xcvr: flexcan-xcvrgrp {
fsl,pins = <
MX6UL_PAD_LCD_DATA00__GPIO3_IO05 0x0b0b0 /* Flexcan XCVR enable */
>;
};
pinctrl_gpmi_nand: gpminandgrp {
fsl,pins = <
MX6UL_PAD_NAND_CLE__RAWNAND_CLE 0x0b0b1
MX6UL_PAD_NAND_ALE__RAWNAND_ALE 0x0b0b1
MX6UL_PAD_NAND_WP_B__RAWNAND_WP_B 0x0b0b1
MX6UL_PAD_NAND_READY_B__RAWNAND_READY_B 0x0b000
MX6UL_PAD_NAND_CE0_B__RAWNAND_CE0_B 0x0b0b1
MX6UL_PAD_NAND_RE_B__RAWNAND_RE_B 0x0b0b1
MX6UL_PAD_NAND_WE_B__RAWNAND_WE_B 0x0b0b1
MX6UL_PAD_NAND_DATA00__RAWNAND_DATA00 0x0b0b1
MX6UL_PAD_NAND_DATA01__RAWNAND_DATA01 0x0b0b1
MX6UL_PAD_NAND_DATA02__RAWNAND_DATA02 0x0b0b1
MX6UL_PAD_NAND_DATA03__RAWNAND_DATA03 0x0b0b1
MX6UL_PAD_NAND_DATA04__RAWNAND_DATA04 0x0b0b1
MX6UL_PAD_NAND_DATA05__RAWNAND_DATA05 0x0b0b1
MX6UL_PAD_NAND_DATA06__RAWNAND_DATA06 0x0b0b1
MX6UL_PAD_NAND_DATA07__RAWNAND_DATA07 0x0b0b1
>;
};
pinctrl_i2c_gpio: i2c-gpiogrp {
fsl,pins = <
MX6UL_PAD_SNVS_TAMPER0__GPIO5_IO00 0x4001b8b1 /* I2C SCL */
MX6UL_PAD_SNVS_TAMPER1__GPIO5_IO01 0x4001b8b1 /* I2C SDA */
>;
};
pinctrl_i2c2: i2c2grp {
fsl,pins = <
MX6UL_PAD_GPIO1_IO00__I2C2_SCL 0x4001b8b1
MX6UL_PAD_GPIO1_IO01__I2C2_SDA 0x4001b8b1
>;
};
pinctrl_kpp: kppgrp {
fsl,pins = <
MX6UL_PAD_ENET2_RX_DATA1__KPP_COL04 0x1b0b0
MX6UL_PAD_ENET2_TX_DATA0__KPP_COL05 0x1b0b0
MX6UL_PAD_ENET2_TX_EN__KPP_COL06 0x1b0b0
MX6UL_PAD_ENET2_RX_ER__KPP_COL07 0x1b0b0
MX6UL_PAD_ENET2_RX_DATA0__KPP_ROW04 0x1b0b0
MX6UL_PAD_ENET2_RX_EN__KPP_ROW05 0x1b0b0
MX6UL_PAD_ENET2_TX_DATA1__KPP_ROW06 0x1b0b0
MX6UL_PAD_ENET2_TX_CLK__KPP_ROW07 0x1b0b0
>;
};
pinctrl_lcd_pwr: lcd-pwrgrp {
fsl,pins = <
MX6UL_PAD_SNVS_TAMPER4__GPIO5_IO04 0x0b0b0 /* LCD Power Enable */
>;
};
pinctrl_lcd_rst: lcd-rstgrp {
fsl,pins = <
MX6UL_PAD_LCD_RESET__GPIO3_IO04 0x0b0b0 /* LCD Reset */
>;
};
pinctrl_pwm5: pwm5grp {
fsl,pins = <
MX6UL_PAD_NAND_DQS__PWM5_OUT 0x0b0b0
>;
};
pinctrl_sai2: sai2grp {
fsl,pins = <
MX6UL_PAD_JTAG_TCK__SAI2_RX_DATA 0x0b0b0 /* SSI1_RXD */
MX6UL_PAD_JTAG_TRST_B__SAI2_TX_DATA 0x0b0b0 /* SSI1_TXD */
MX6UL_PAD_JTAG_TDI__SAI2_TX_BCLK 0x0b0b0 /* SSI1_CLK */
MX6UL_PAD_JTAG_TDO__SAI2_TX_SYNC 0x0b0b0 /* SSI1_FS */
>;
};
pinctrl_spi_gpio: spi-gpiogrp {
fsl,pins = <
MX6UL_PAD_UART4_RX_DATA__GPIO1_IO29 0x0b0b0 /* CSPI_SS */
MX6UL_PAD_JTAG_MOD__GPIO1_IO10 0x0b0b0 /* CSPI_SS */
MX6UL_PAD_UART5_TX_DATA__GPIO1_IO30 0x0b0b0 /* CSPI_MOSI */
MX6UL_PAD_UART5_RX_DATA__GPIO1_IO31 0x0b0b0 /* CSPI_MISO */
MX6UL_PAD_UART4_TX_DATA__GPIO1_IO28 0x0b0b0 /* CSPI_SCLK */
>;
};
pinctrl_tsc2007: tsc2007grp {
fsl,pins = <
MX6UL_PAD_JTAG_TMS__GPIO1_IO11 0x1b0b0 /* Interrupt */
>;
};
pinctrl_uart1: uart1grp {
fsl,pins = <
MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x0b0b0
MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0x0b0b0
>;
};
pinctrl_uart1_rtscts: uart1-rtsctsgrp {
fsl,pins = <
MX6UL_PAD_UART1_RTS_B__UART1_DCE_RTS 0x0b0b0
MX6UL_PAD_UART1_CTS_B__UART1_DCE_CTS 0x0b0b0
>;
};
pinctrl_uart2: uart2grp {
fsl,pins = <
MX6UL_PAD_UART2_TX_DATA__UART2_DCE_TX 0x0b0b0
MX6UL_PAD_UART2_RX_DATA__UART2_DCE_RX 0x0b0b0
>;
};
pinctrl_uart2_rtscts: uart2-rtsctsgrp {
fsl,pins = <
MX6UL_PAD_UART3_RX_DATA__UART2_DCE_RTS 0x0b0b0
MX6UL_PAD_UART3_TX_DATA__UART2_DCE_CTS 0x0b0b0
>;
};
pinctrl_uart5: uart5grp {
fsl,pins = <
MX6UL_PAD_GPIO1_IO04__UART5_DCE_TX 0x0b0b0
MX6UL_PAD_GPIO1_IO05__UART5_DCE_RX 0x0b0b0
>;
};
pinctrl_uart5_rtscts: uart5-rtsctsgrp {
fsl,pins = <
MX6UL_PAD_GPIO1_IO08__UART5_DCE_RTS 0x0b0b0
MX6UL_PAD_GPIO1_IO09__UART5_DCE_CTS 0x0b0b0
>;
};
pinctrl_usbh1_oc: usbh1-ocgrp {
fsl,pins = <
MX6UL_PAD_GPIO1_IO03__GPIO1_IO03 0x17059 /* USBH1_OC */
>;
};
pinctrl_usbh1_vbus: usbh1-vbusgrp {
fsl,pins = <
MX6UL_PAD_GPIO1_IO02__GPIO1_IO02 0x0b0b0 /* USBH1_VBUSEN */
>;
};
pinctrl_usbotg_oc: usbotg-ocgrp {
fsl,pins = <
MX6UL_PAD_UART3_RTS_B__GPIO1_IO27 0x17059 /* USBOTG_OC */
>;
};
pinctrl_usbotg_vbus: usbotg-vbusgrp {
fsl,pins = <
MX6UL_PAD_UART3_CTS_B__GPIO1_IO26 0x1b0b0 /* USBOTG_VBUSEN */
>;
};
pinctrl_usdhc1: usdhc1grp {
fsl,pins = <
MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x070b1
MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x07099
MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x070b1
MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x070b1
MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x070b1
MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x070b1
>;
};
pinctrl_usdhc1_cd: usdhc1cdgrp {
fsl,pins = <
MX6UL_PAD_NAND_CE1_B__GPIO4_IO14 0x170b0 /* SD1 CD */
>;
};
pinctrl_usdhc2: usdhc2grp {
fsl,pins = <
MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x070b1
MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x070b1
MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x070b1
MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x070b1
MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x070b1
MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x070b1
/* eMMC RESET */
MX6UL_PAD_NAND_ALE__USDHC2_RESET_B 0x170b0
>;
};
};
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7