ARM: dts: qcom: ipq4019-ap.dk01.1: use existing labels for nodes

All of the nodes under soc already have existing labels so use those
instead.
Signed-off-by: Robert Marko <robimarko@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230811210142.403160-1-robimarko@gmail.comSigned-off-by: Bjorn Andersson <andersson@kernel.org>

arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk01.1.dtsi

@@ -27,87 +27,85 @@ aliases {
 	chosen {
 		stdout-path = "serial0:115200n8";
 	};
+};
 
-	soc {
-		rng@22000 {
-			status = "okay";
-		};
+&prng {
+	status = "okay";
+};
 
-		pinctrl@1000000 {
-			serial_pins: serial_pinmux {
-				mux {
-					pins = "gpio60", "gpio61";
-					function = "blsp_uart0";
-					bias-disable;
-				};
-			};
-
-			spi_0_pins: spi_0_pinmux {
-				pinmux {
-					function = "blsp_spi0";
-					pins = "gpio55", "gpio56", "gpio57";
-				};
-				pinmux_cs {
-					function = "gpio";
-					pins = "gpio54";
-				};
-				pinconf {
-					pins = "gpio55", "gpio56", "gpio57";
-					drive-strength = <12>;
-					bias-disable;
-				};
-				pinconf_cs {
-					pins = "gpio54";
-					drive-strength = <2>;
-					bias-disable;
-					output-high;
-				};
-			};
+&tlmm {
+	serial_pins: serial_pinmux {
+		mux {
+			pins = "gpio60", "gpio61";
+			function = "blsp_uart0";
+			bias-disable;
 		};
+	};
 
-		blsp_dma: dma-controller@7884000 {
-			status = "okay";
+	spi_0_pins: spi_0_pinmux {
+		pinmux {
+			function = "blsp_spi0";
+			pins = "gpio55", "gpio56", "gpio57";
 		};
-
-		spi@78b5000 {
-			pinctrl-0 = <&spi_0_pins>;
-			pinctrl-names = "default";
-			status = "okay";
-			cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
-
-			mx25l25635e@0 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				reg = <0>;
-				compatible = "mx25l25635e";
-				spi-max-frequency = <24000000>;
-			};
+		pinmux_cs {
+			function = "gpio";
+			pins = "gpio54";
 		};
-
-		serial@78af000 {
-			pinctrl-0 = <&serial_pins>;
-			pinctrl-names = "default";
-			status = "okay";
+		pinconf {
+			pins = "gpio55", "gpio56", "gpio57";
+			drive-strength = <12>;
+			bias-disable;
 		};
-
-		cryptobam: dma-controller@8e04000 {
-			status = "okay";
+		pinconf_cs {
+			pins = "gpio54";
+			drive-strength = <2>;
+			bias-disable;
+			output-high;
 		};
+	};
+};
 
-		crypto@8e3a000 {
-			status = "okay";
-		};
+&blsp_dma {
+	status = "okay";
+};
 
-		watchdog@b017000 {
-			status = "okay";
-		};
+&blsp1_spi1 {
+	pinctrl-0 = <&spi_0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+	cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
+
+	mx25l25635e@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0>;
+		compatible = "mx25l25635e";
+		spi-max-frequency = <24000000>;
+	};
+};
 
-		wifi@a000000 {
-			status = "okay";
-		};
+&blsp1_uart1 {
+	pinctrl-0 = <&serial_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
 
-		wifi@a800000 {
-			status = "okay";
-		};
-	};
+&cryptobam {
+	status = "okay";
+};
+
+&crypto {
+	status = "okay";
+};
+
+&watchdog {
+	status = "okay";
+};
+
+&wifi0 {
+	status = "okay";
+};
+
+&wifi1 {
+	status = "okay";
 };