Merge tag 'mips_6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux

Pull MIPS updates from Thomas Bogendoerfer:

 - added support for Mobileye SoCs

 - unified GPR/CP0 regs handling for uasm

 - cleanups and fixes

* tag 'mips_6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (56 commits)
  mips: cm: Convert __mips_cm_phys_base() to weak function
  mips: cm: Convert __mips_cm_l2sync_phys_base() to weak function
  mips: dts: ralink: mt7621: add cell count properties to usb
  mips: dts: ralink: mt7621: add serial1 and serial2 nodes
  mips: dts: ralink: mt7621: reorder serial0 properties
  mips: dts: ralink: mt7621: associate uart1_pins with serial0
  MIPS: ralink: Don't use "proxy" headers
  mips: sibyte: make tb_class constant
  mips: mt: make mt_class constant
  MIPS: ralink: Remove unused of_gpio.h
  bus: bt1-apb: Remove duplicate include
  MAINTAINERS: remove entry to non-existing file in MOBILEYE MIPS SOCS
  MIPS: mipsregs: Parse fp and sp register by name in parse_r
  tty: mips_ejtag_fdc: Fix passing incompatible pointer type warning
  mips: zboot: Fix "no previous prototype" build warning
  MIPS: mipsregs: Set proper ISA level for virt extensions
  MIPS: Implement microMIPS MT ASE helpers
  MIPS: Limit MIPS_MT_SMP support by ISA reversion
  MIPS: Loongson64: test for -march=loongson3a cflag
  MIPS: BMIPS: Drop unnecessary assembler flag
  ...

Documentation/devicetree/bindings/mips/cpus.yaml

@@ -23,22 +23,23 @@ properties:
       - brcm,bmips4380
       - brcm,bmips5000
       - brcm,bmips5200
-      - ingenic,xburst-mxu1.0
+      - img,i6500
       - ingenic,xburst-fpu1.0-mxu1.1
       - ingenic,xburst-fpu2.0-mxu2.0
+      - ingenic,xburst-mxu1.0
       - ingenic,xburst2-fpu2.1-mxu2.1-smt
       - loongson,gs264
       - mips,m14Kc
-      - mips,mips4Kc
-      - mips,mips4KEc
-      - mips,mips24Kc
+      - mips,mips1004Kc
       - mips,mips24KEc
+      - mips,mips24Kc
+      - mips,mips4KEc
+      - mips,mips4Kc
       - mips,mips74Kc
-      - mips,mips1004Kc
       - mti,interaptiv
-      - mti,mips24KEc
       - mti,mips14KEc
       - mti,mips14Kc
+      - mti,mips24KEc
 
   reg:
     maxItems: 1

Documentation/devicetree/bindings/mips/mobileye.yaml

+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+# Copyright 2023 Mobileye Vision Technologies Ltd.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mips/mobileye.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mobileye SoC series
+
+maintainers:
+  - Vladimir Kondratiev <vladimir.kondratiev@intel.com>
+  - Gregory CLEMENT <gregory.clement@bootlin.com>
+  - Théo Lebrun <theo.lebrun@bootlin.com>
+
+description:
+  Boards with a Mobileye SoC shall have the following properties.
+
+properties:
+  $nodename:
+    const: '/'
+
+  compatible:
+    oneOf:
+      - description: Boards with Mobileye EyeQ5 SoC
+        items:
+          - enum:
+              - mobileye,eyeq5-epm5
+          - const: mobileye,eyeq5
+
+additionalProperties: true
+
+...

Documentation/devicetree/bindings/vendor-prefixes.yaml

@@ -941,6 +941,8 @@ patternProperties:
     description: Miyoo
   "^mntre,.*":
     description: MNT Research GmbH
+  "^mobileye,.*":
+    description: Mobileye Vision Technologies Ltd.
   "^modtronix,.*":
     description: Modtronix Engineering
   "^moortec,.*":

MAINTAINERS

@@ -14741,6 +14741,17 @@ F:	arch/mips/
 F:	drivers/platform/mips/
 F:	include/dt-bindings/mips/
 
+MIPS BAIKAL-T1 PLATFORM
+M:	Serge Semin <fancer.lancer@gmail.com>
+L:	linux-mips@vger.kernel.org
+S:	Supported
+F:	Documentation/devicetree/bindings/bus/baikal,bt1-*.yaml
+F:	Documentation/devicetree/bindings/clock/baikal,bt1-*.yaml
+F:	drivers/bus/bt1-*.c
+F:	drivers/clk/baikal-t1/
+F:	drivers/memory/bt1-l2-ctl.c
+F:	drivers/mtd/maps/physmap-bt1-rom.[ch]
+
 MIPS BOSTON DEVELOPMENT BOARD
 M:	Paul Burton <paulburton@kernel.org>
 L:	linux-mips@vger.kernel.org
@@ -14861,6 +14872,17 @@ W:	https://linuxtv.org
 Q:	http://patchwork.linuxtv.org/project/linux-media/list/
 F:	drivers/media/dvb-frontends/mn88473*
 
+MOBILEYE MIPS SOCS
+M:	Vladimir Kondratiev <vladimir.kondratiev@mobileye.com>
+M:	Gregory CLEMENT <gregory.clement@bootlin.com>
+M:	Théo Lebrun <theo.lebrun@bootlin.com>
+L:	linux-mips@vger.kernel.org
+S:	Maintained
+F:	Documentation/devicetree/bindings/mips/mobileye.yaml
+F:	arch/mips/boot/dts/mobileye/
+F:	arch/mips/configs/eyeq5_defconfig
+F:	arch/mips/mobileye/board-epm5.its.S
+
 MODULE SUPPORT
 M:	Luis Chamberlain <mcgrof@kernel.org>
 L:	linux-modules@vger.kernel.org

arch/mips/Kbuild

@@ -11,6 +11,7 @@ obj- := $(platform-y)
 # mips object files
 # The object files are linked as core-y files would be linked
 
+obj-y += generic/
 obj-y += kernel/
 obj-y += mm/
 obj-y += net/

arch/mips/Kbuild.platforms

@@ -17,6 +17,7 @@ platform-$(CONFIG_MACH_LOONGSON2EF)	+= loongson2ef/
 platform-$(CONFIG_MACH_LOONGSON32)	+= loongson32/
 platform-$(CONFIG_MACH_LOONGSON64)	+= loongson64/
 platform-$(CONFIG_MIPS_MALTA)		+= mti-malta/
+platform-$(CONFIG_MACH_EYEQ5)		+= mobileye/
 platform-$(CONFIG_MACH_NINTENDO64)	+= n64/
 platform-$(CONFIG_PIC32MZDA)		+= pic32/
 platform-$(CONFIG_RALINK)		+= ralink/

arch/mips/Kconfig

@@ -113,6 +113,9 @@ config MIPS_FIXUP_BIGPHYS_ADDR
 config MIPS_GENERIC
 	bool
 
+config MACH_GENERIC_CORE
+	bool
+
 config MACH_INGENIC
 	bool
 	select SYS_SUPPORTS_32BIT_KERNEL
@@ -149,6 +152,7 @@ config MIPS_GENERIC_KERNEL
 	select DMA_NONCOHERENT
 	select HAVE_PCI
 	select IRQ_MIPS_CPU
+	select MACH_GENERIC_CORE
 	select MIPS_AUTO_PFN_OFFSET
 	select MIPS_CPU_SCACHE
 	select MIPS_GIC
@@ -417,6 +421,7 @@ config MACH_INGENIC_SOC
 	bool "Ingenic SoC based machines"
 	select MIPS_GENERIC
 	select MACH_INGENIC
+	select MACH_GENERIC_CORE
 	select SYS_SUPPORTS_ZBOOT_UART16550
 	select CPU_SUPPORTS_CPUFREQ
 	select MIPS_EXTERNAL_TIMER
@@ -570,6 +575,59 @@ config MACH_PIC32
 	  Microchip PIC32 is a family of general-purpose 32 bit MIPS core
 	  microcontrollers.
 
+config MACH_EYEQ5
+	bool "Mobileye EyeQ5 SoC"
+	select MACH_GENERIC_CORE
+	select ARM_AMBA
+	select PHYSICAL_START_BOOL
+	select ARCH_SPARSEMEM_DEFAULT if 64BIT
+	select BOOT_RAW
+	select BUILTIN_DTB
+	select CEVT_R4K
+	select CLKSRC_MIPS_GIC
+	select COMMON_CLK
+	select CPU_MIPSR2_IRQ_EI
+	select CPU_MIPSR2_IRQ_VI
+	select CSRC_R4K
+	select DMA_NONCOHERENT
+	select HAVE_PCI
+	select IRQ_MIPS_CPU
+	select MIPS_AUTO_PFN_OFFSET
+	select MIPS_CPU_SCACHE
+	select MIPS_GIC
+	select MIPS_L1_CACHE_SHIFT_7
+	select PCI_DRIVERS_GENERIC
+	select SMP_UP if SMP
+	select SWAP_IO_SPACE
+	select SYS_HAS_CPU_MIPS64_R6
+	select SYS_SUPPORTS_64BIT_KERNEL
+	select SYS_SUPPORTS_HIGHMEM
+	select SYS_SUPPORTS_LITTLE_ENDIAN
+	select SYS_SUPPORTS_MIPS_CPS
+	select SYS_SUPPORTS_RELOCATABLE
+	select SYS_SUPPORTS_ZBOOT
+	select UHI_BOOT
+	select USB_EHCI_BIG_ENDIAN_DESC if CPU_BIG_ENDIAN
+	select USB_EHCI_BIG_ENDIAN_MMIO if CPU_BIG_ENDIAN
+	select USB_OHCI_BIG_ENDIAN_DESC if CPU_BIG_ENDIAN
+	select USB_OHCI_BIG_ENDIAN_MMIO if CPU_BIG_ENDIAN
+	select USB_UHCI_BIG_ENDIAN_DESC if CPU_BIG_ENDIAN
+	select USB_UHCI_BIG_ENDIAN_MMIO if CPU_BIG_ENDIAN
+	select USE_OF
+	help
+	  Select this to build a kernel supporting EyeQ5 SoC from Mobileye.
+
+	bool
+
+config FIT_IMAGE_FDT_EPM5
+	bool "Include FDT for Mobileye EyeQ5 development platforms"
+	depends on MACH_EYEQ5
+	default n
+	help
+	  Enable this to include the FDT for the EyeQ5 development platforms
+	  from Mobileye in the FIT kernel image.
+	  This requires u-boot on the platform.
+
 config MACH_NINTENDO64
 	bool "Nintendo 64 console"
 	select CEVT_R4K
@@ -603,6 +661,7 @@ config RALINK
 config MACH_REALTEK_RTL
 	bool "Realtek RTL838x/RTL839x based machines"
 	select MIPS_GENERIC
+	select MACH_GENERIC_CORE
 	select DMA_NONCOHERENT
 	select IRQ_MIPS_CPU
 	select CSRC_R4K
@@ -1273,44 +1332,6 @@ config CPU_LOONGSON64
 	  3B1000, 3B1500, 3A2000, 3A3000 and 3A4000) processors. However, old
 	  Loongson-2E/2F is not covered here and will be removed in future.
 
-config LOONGSON3_ENHANCEMENT
-	bool "New Loongson-3 CPU Enhancements"
-	default n
-	depends on CPU_LOONGSON64
-	help
-	  New Loongson-3 cores (since Loongson-3A R2, as opposed to Loongson-3A
-	  R1, Loongson-3B R1 and Loongson-3B R2) has many enhancements, such as
-	  FTLB, L1-VCache, EI/DI/Wait/Prefetch instruction, DSP/DSPr2 ASE, User
-	  Local register, Read-Inhibit/Execute-Inhibit, SFB (Store Fill Buffer),
-	  Fast TLB refill support, etc.
-
-	  This option enable those enhancements which are not probed at run
-	  time. If you want a generic kernel to run on all Loongson 3 machines,
-	  please say 'N' here. If you want a high-performance kernel to run on
-	  new Loongson-3 machines only, please say 'Y' here.
-
-config CPU_LOONGSON3_WORKAROUNDS
-	bool "Loongson-3 LLSC Workarounds"
-	default y if SMP
-	depends on CPU_LOONGSON64
-	help
-	  Loongson-3 processors have the llsc issues which require workarounds.
-	  Without workarounds the system may hang unexpectedly.
-
-	  Say Y, unless you know what you are doing.
-
-config CPU_LOONGSON3_CPUCFG_EMULATION
-	bool "Emulate the CPUCFG instruction on older Loongson cores"
-	default y
-	depends on CPU_LOONGSON64
-	help
-	  Loongson-3A R4 and newer have the CPUCFG instruction available for
-	  userland to query CPU capabilities, much like CPUID on x86. This
-	  option provides emulation of the instruction on older Loongson
-	  cores, back to Loongson-3A1000.
-
-	  If unsure, please say Y.
-
 config CPU_LOONGSON2E
 	bool "Loongson 2E"
 	depends on SYS_HAS_CPU_LOONGSON2E
@@ -1650,6 +1671,44 @@ config CPU_BMIPS
 
 endchoice
 
+config LOONGSON3_ENHANCEMENT
+	bool "New Loongson-3 CPU Enhancements"
+	default n
+	depends on CPU_LOONGSON64
+	help
+	  New Loongson-3 cores (since Loongson-3A R2, as opposed to Loongson-3A
+	  R1, Loongson-3B R1 and Loongson-3B R2) has many enhancements, such as
+	  FTLB, L1-VCache, EI/DI/Wait/Prefetch instruction, DSP/DSPr2 ASE, User
+	  Local register, Read-Inhibit/Execute-Inhibit, SFB (Store Fill Buffer),
+	  Fast TLB refill support, etc.
+
+	  This option enable those enhancements which are not probed at run
+	  time. If you want a generic kernel to run on all Loongson 3 machines,
+	  please say 'N' here. If you want a high-performance kernel to run on
+	  new Loongson-3 machines only, please say 'Y' here.
+
+config CPU_LOONGSON3_WORKAROUNDS
+	bool "Loongson-3 LLSC Workarounds"
+	default y if SMP
+	depends on CPU_LOONGSON64
+	help
+	  Loongson-3 processors have the llsc issues which require workarounds.
+	  Without workarounds the system may hang unexpectedly.
+
+	  Say Y, unless you know what you are doing.
+
+config CPU_LOONGSON3_CPUCFG_EMULATION
+	bool "Emulate the CPUCFG instruction on older Loongson cores"
+	default y
+	depends on CPU_LOONGSON64
+	help
+	  Loongson-3A R4 and newer have the CPUCFG instruction available for
+	  userland to query CPU capabilities, much like CPUID on x86. This
+	  option provides emulation of the instruction on older Loongson
+	  cores, back to Loongson-3A1000.
+
+	  If unsure, please say Y.
+
 config CPU_MIPS32_3_5_FEATURES
 	bool "MIPS32 Release 3.5 Features"
 	depends on SYS_HAS_CPU_MIPS32_R3_5
@@ -2124,7 +2183,8 @@ config CPU_R4K_CACHE_TLB
 config MIPS_MT_SMP
 	bool "MIPS MT SMP support (1 TC on each available VPE)"
 	default y
-	depends on SYS_SUPPORTS_MULTITHREADING && !CPU_MIPSR6 && !CPU_MICROMIPS
+	depends on TARGET_ISA_REV > 0 && TARGET_ISA_REV < 6
+	depends on SYS_SUPPORTS_MULTITHREADING && !CPU_MICROMIPS
 	select CPU_MIPSR2_IRQ_VI
 	select CPU_MIPSR2_IRQ_EI
 	select SYNC_R4K

arch/mips/Makefile

@@ -148,10 +148,10 @@ cflags-y += $(call cc-option,-Wa$(comma)-mno-fix-loongson3-llsc,)
 #
 # CPU-dependent compiler/assembler options for optimization.
 #
-cflags-$(CONFIG_CPU_R3000)	+= -march=r3000
-cflags-$(CONFIG_CPU_R4300)	+= -march=r4300 -Wa,--trap
-cflags-$(CONFIG_CPU_R4X00)	+= -march=r4600 -Wa,--trap
-cflags-$(CONFIG_CPU_TX49XX)	+= -march=r4600 -Wa,--trap
+cflags-$(CONFIG_CPU_R3000)	+= $(call cc-option,-march=r3000,-march=mips1)
+cflags-$(CONFIG_CPU_R4300)	+= $(call cc-option,-march=r4300,-march=mips3) -Wa,--trap
+cflags-$(CONFIG_CPU_R4X00)	+= $(call cc-option,-march=r4600,-march=mips3) -Wa,--trap
+cflags-$(CONFIG_CPU_TX49XX)	+= $(call cc-option,-march=r4600,-march=mips3) -Wa,--trap
 cflags-$(CONFIG_CPU_MIPS32_R1)	+= -march=mips32 -Wa,--trap
 cflags-$(CONFIG_CPU_MIPS32_R2)	+= -march=mips32r2 -Wa,--trap
 cflags-$(CONFIG_CPU_MIPS32_R5)	+= -march=mips32r5 -Wa,--trap -modd-spreg
@@ -160,37 +160,35 @@ cflags-$(CONFIG_CPU_MIPS64_R1)	+= -march=mips64 -Wa,--trap
 cflags-$(CONFIG_CPU_MIPS64_R2)	+= -march=mips64r2 -Wa,--trap
 cflags-$(CONFIG_CPU_MIPS64_R5)	+= -march=mips64r5 -Wa,--trap
 cflags-$(CONFIG_CPU_MIPS64_R6)	+= -march=mips64r6 -Wa,--trap
-cflags-$(CONFIG_CPU_P5600)	+= -march=p5600 -Wa,--trap -modd-spreg
-cflags-$(CONFIG_CPU_R5000)	+= -march=r5000 -Wa,--trap
-cflags-$(CONFIG_CPU_R5500)	+= $(call cc-option,-march=r5500,-march=r5000) \
+cflags-$(CONFIG_CPU_P5600)	+= $(call cc-option,-march=p5600,-march=mips32r5) \
+			-Wa,--trap -modd-spreg
+cflags-$(CONFIG_CPU_R5000)	+= $(call cc-option,-march=r5000,-march=mips4) \
 			-Wa,--trap
-cflags-$(CONFIG_CPU_NEVADA)	+= $(call cc-option,-march=rm5200,-march=r5000) \
+cflags-$(CONFIG_CPU_R5500)	+= $(call cc-option,-march=r5500,-march=mips4) \
 			-Wa,--trap
-cflags-$(CONFIG_CPU_RM7000)	+= $(call cc-option,-march=rm7000,-march=r5000) \
+cflags-$(CONFIG_CPU_NEVADA)	+= $(call cc-option,-march=rm5200,-march=mips4) \
 			-Wa,--trap
-cflags-$(CONFIG_CPU_SB1)	+= $(call cc-option,-march=sb1,-march=r5000) \
+cflags-$(CONFIG_CPU_RM7000)	+= $(call cc-option,-march=rm7000,-march=mips4) \
+			-Wa,--trap
+cflags-$(CONFIG_CPU_SB1)	+= $(call cc-option,-march=sb1,-march=mips64r1) \
 			-Wa,--trap
 cflags-$(CONFIG_CPU_SB1)	+= $(call cc-option,-mno-mdmx)
 cflags-$(CONFIG_CPU_SB1)	+= $(call cc-option,-mno-mips3d)
-cflags-$(CONFIG_CPU_R10000)	+= $(call cc-option,-march=r10000,-march=r8000) \
+cflags-$(CONFIG_CPU_R10000)	+= $(call cc-option,-march=r10000,-march=mips4) \
 			-Wa,--trap
-cflags-$(CONFIG_CPU_CAVIUM_OCTEON) += $(call cc-option,-march=octeon) -Wa,--trap
-ifeq (,$(findstring march=octeon, $(cflags-$(CONFIG_CPU_CAVIUM_OCTEON))))
-cflags-$(CONFIG_CPU_CAVIUM_OCTEON) += -Wa,-march=octeon
-endif
+cflags-$(CONFIG_CPU_CAVIUM_OCTEON) += -march=octeon -Wa,--trap
 cflags-$(CONFIG_CAVIUM_CN63XXP1) += -Wa,-mfix-cn63xxp1
-cflags-$(CONFIG_CPU_BMIPS)	+= -march=mips32 -Wa,-mips32 -Wa,--trap
+cflags-$(CONFIG_CPU_BMIPS)	+= -march=mips32 -Wa,--trap
 
-cflags-$(CONFIG_CPU_LOONGSON2E) += -march=loongson2e -Wa,--trap
-cflags-$(CONFIG_CPU_LOONGSON2F) += -march=loongson2f -Wa,--trap
+cflags-$(CONFIG_CPU_LOONGSON2E) += \
+			$(call cc-option,-march=loongson2e,-march=mips3) -Wa,--trap
+cflags-$(CONFIG_CPU_LOONGSON2F) += \
+			$(call cc-option,-march=loongson2f,-march=mips3) -Wa,--trap
 # Some -march= flags enable MMI instructions, and GCC complains about that
 # support being enabled alongside -msoft-float. Thus explicitly disable MMI.
 cflags-$(CONFIG_CPU_LOONGSON2EF) += $(call cc-option,-mno-loongson-mmi)
-ifdef CONFIG_CPU_LOONGSON64
-cflags-$(CONFIG_CPU_LOONGSON64)	+= -Wa,--trap
-cflags-$(CONFIG_CC_IS_GCC) += -march=loongson3a
-cflags-$(CONFIG_CC_IS_CLANG) += -march=mips64r2
-endif
+cflags-$(CONFIG_CPU_LOONGSON64)	+= \
+			$(call cc-option,-march=loongson3a,-march=mips64r2) -Wa,--trap
 cflags-$(CONFIG_CPU_LOONGSON64) += $(call cc-option,-mno-loongson-mmi)
 
 cflags-$(CONFIG_CPU_R4000_WORKAROUNDS)	+= $(call cc-option,-mfix-r4000,)
@@ -299,7 +297,7 @@ drivers-$(CONFIG_PCI)		+= arch/mips/pci/
 ifdef CONFIG_64BIT
   ifndef KBUILD_SYM32
     ifeq ($(shell expr $(load-y) \< 0xffffffff80000000), 0)
-      KBUILD_SYM32 = y
+      KBUILD_SYM32 = $(call cc-option-yn, -msym32)
     endif
   endif
 

arch/mips/alchemy/common/clock.c

@@ -771,7 +771,7 @@ static int __init alchemy_clk_init_fgens(int ctype)
 	}
 	id.flags = CLK_SET_RATE_PARENT | CLK_GET_RATE_NOCACHE;
 
-	a = kzalloc((sizeof(*a)) * 6, GFP_KERNEL);
+	a = kcalloc(6, sizeof(*a), GFP_KERNEL);
 	if (!a)
 		return -ENOMEM;
 

arch/mips/boot/compressed/uart-16550.c

@@ -8,6 +8,8 @@
 
 #include <asm/addrspace.h>
 
+#include "decompress.h"
+
 #if defined(CONFIG_MACH_LOONGSON64) || defined(CONFIG_MIPS_MALTA)
 #define UART_BASE 0x1fd003f8
 #define PORT(offset) (CKSEG1ADDR(UART_BASE) + (offset))

arch/mips/boot/compressed/uart-alchemy.c

 // SPDX-License-Identifier: GPL-2.0
 #include <asm/mach-au1x00/au1000.h>
 
+#include "decompress.h"
+
 void putc(char c)
 {
 	alchemy_uart_putchar(AU1000_UART0_PHYS_ADDR, c);

arch/mips/boot/compressed/uart-prom.c

 // SPDX-License-Identifier: GPL-2.0
 #include <asm/setup.h>
 
+#include "decompress.h"
+
 void putc(char c)
 {
 	prom_putchar(c);

arch/mips/boot/dts/Makefile

@@ -8,6 +8,7 @@ subdir-$(CONFIG_LANTIQ)			+= lantiq
 subdir-$(CONFIG_MACH_LOONGSON64)	+= loongson
 subdir-$(CONFIG_SOC_VCOREIII)		+= mscc
 subdir-$(CONFIG_MIPS_MALTA)		+= mti
+subdir-$(CONFIG_MACH_EYEQ5)		+= mobileye
 subdir-$(CONFIG_LEGACY_BOARD_SEAD3)	+= mti
 subdir-$(CONFIG_FIT_IMAGE_FDT_NI169445)	+= ni
 subdir-$(CONFIG_MACH_PIC32)		+= pic32

arch/mips/boot/dts/mobileye/Makefile

+# SPDX-License-Identifier: GPL-2.0-only
+# Copyright 2023 Mobileye Vision Technologies Ltd.
+
+dtb-$(CONFIG_MACH_EYEQ5)		+= eyeq5-epm5.dtb

arch/mips/boot/dts/mobileye/eyeq5-epm5.dts

+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Copyright 2023 Mobileye Vision Technologies Ltd.
+ */
+
+/dts-v1/;
+
+#include "eyeq5.dtsi"
+
+/ {
+	compatible = "mobileye,eyeq5-epm5", "mobileye,eyeq5";
+	model = "Mobile EyeQ5 MP5 Evaluation board";
+
+	chosen {
+		stdout-path = "serial2:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x40000000 0x0 0x02000000>,
+		      <0x8 0x02000000 0x0 0x7E000000>;
+	};
+};

arch/mips/boot/dts/mobileye/eyeq5-fixed-clocks.dtsi

+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Copyright 2023 Mobileye Vision Technologies Ltd.
+ */
+
+/ {
+	/* Fixed clock */
+	pll_cpu: pll-cpu {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <1500000000>;
+	};
+
+	pll_vdi: pll-vdi {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <1280000000>;
+	};
+
+	pll_per: pll-per {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <2000000000>;
+	};
+
+	pll_ddr0: pll-ddr0 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <1857210000>;
+	};
+
+	pll_ddr1: pll-ddr1 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <1857210000>;
+	};
+
+/* PLL_CPU derivatives */
+	occ_cpu: occ-cpu {
+		compatible = "fixed-factor-clock";
+		clocks = <&pll_cpu>;
+		#clock-cells = <0>;
+		clock-div = <1>;
+		clock-mult = <1>;
+	};
+	si_css0_ref_clk: si-css0-ref-clk { /* gate ClkRstGen_si_css0_ref */
+		compatible = "fixed-factor-clock";
+		clocks = <&occ_cpu>;
+		#clock-cells = <0>;
+		clock-div = <1>;
+		clock-mult = <1>;
+	};
+	cpc_clk: cpc-clk {
+		compatible = "fixed-factor-clock";
+		clocks = <&si_css0_ref_clk>;
+		#clock-cells = <0>;
+		clock-div = <1>;
+		clock-mult = <1>;
+	};
+	core0_clk: core0-clk {
+		compatible = "fixed-factor-clock";
+		clocks = <&si_css0_ref_clk>;
+		#clock-cells = <0>;
+		clock-div = <1>;
+		clock-mult = <1>;
+	};
+	core1_clk: core1-clk {
+		compatible = "fixed-factor-clock";
+		clocks = <&si_css0_ref_clk>;
+		#clock-cells = <0>;
+		clock-div = <1>;
+		clock-mult = <1>;
+	};
+	core2_clk: core2-clk {
+		compatible = "fixed-factor-clock";
+		clocks = <&si_css0_ref_clk>;
+		#clock-cells = <0>;
+		clock-div = <1>;
+		clock-mult = <1>;
+	};
+	core3_clk: core3-clk {
+		compatible = "fixed-factor-clock";
+		clocks = <&si_css0_ref_clk>;
+		#clock-cells = <0>;
+		clock-div = <1>;
+		clock-mult = <1>;
+	};
+	cm_clk: cm-clk {
+		compatible = "fixed-factor-clock";
+		clocks = <&si_css0_ref_clk>;
+		#clock-cells = <0>;
+		clock-div = <1>;
+		clock-mult = <1>;
+	};
+	mem_clk: mem-clk {
+		compatible = "fixed-factor-clock";
+		clocks = <&si_css0_ref_clk>;
+		#clock-cells = <0>;
+		clock-div = <1>;
+		clock-mult = <1>;
+	};
+	occ_isram: occ-isram {
+		compatible = "fixed-factor-clock";
+		clocks = <&pll_cpu>;
+		#clock-cells = <0>;
+		clock-div = <2>;
+		clock-mult = <1>;
+	};
+	isram_clk: isram-clk { /* gate ClkRstGen_isram */
+		compatible = "fixed-factor-clock";
+		clocks = <&occ_isram>;
+		#clock-cells = <0>;
+		clock-div = <1>;
+		clock-mult = <1>;
+	};
+	occ_dbu: occ-dbu {
+		compatible = "fixed-factor-clock";
+		clocks = <&pll_cpu>;
+		#clock-cells = <0>;
+		clock-div = <10>;
+		clock-mult = <1>;
+	};
+	si_dbu_tp_pclk: si-dbu-tp-pclk { /* gate ClkRstGen_dbu */
+		compatible = "fixed-factor-clock";
+		clocks = <&occ_dbu>;
+		#clock-cells = <0>;
+		clock-div = <1>;
+		clock-mult = <1>;
+	};
+/* PLL_VDI derivatives */
+	occ_vdi: occ-vdi {
+		compatible = "fixed-factor-clock";
+		clocks = <&pll_vdi>;
+		#clock-cells = <0>;
+		clock-div = <2>;
+		clock-mult = <1>;
+	};
+	vdi_clk: vdi-clk { /* gate ClkRstGen_vdi */
+		compatible = "fixed-factor-clock";
+		clocks = <&occ_vdi>;
+		#clock-cells = <0>;
+		clock-div = <1>;
+		clock-mult = <1>;
+	};
+	occ_can_ser: occ-can-ser {
+		compatible = "fixed-factor-clock";
+		clocks = <&pll_vdi>;
+		#clock-cells = <0>;
+		clock-div = <16>;
+		clock-mult = <1>;
+	};
+	can_ser_clk: can-ser-clk { /* gate ClkRstGen_can_ser */
+		compatible = "fixed-factor-clock";
+		clocks = <&occ_can_ser>;
+		#clock-cells = <0>;
+		clock-div = <1>;
+		clock-mult = <1>;
+	};
+	i2c_ser_clk: i2c-ser-clk {
+		compatible = "fixed-factor-clock";
+		clocks = <&pll_vdi>;
+		#clock-cells = <0>;
+		clock-div = <20>;
+		clock-mult = <1>;
+	};
+/* PLL_PER derivatives */
+	occ_periph: occ-periph {
+		compatible = "fixed-factor-clock";
+		clocks = <&pll_per>;
+		#clock-cells = <0>;
+		clock-div = <16>;
+		clock-mult = <1>;
+	};
+	periph_clk: periph-clk {
+		compatible = "fixed-factor-clock";
+		clocks = <&occ_periph>;
+		#clock-cells = <0>;
+		clock-div = <1>;
+		clock-mult = <1>;
+	};
+	can_clk: can-clk {
+		compatible = "fixed-factor-clock";
+		clocks = <&occ_periph>;
+		#clock-cells = <0>;
+		clock-div = <1>;
+		clock-mult = <1>;
+	};
+	spi_clk: spi-clk {
+		compatible = "fixed-factor-clock";
+		clocks = <&occ_periph>;
+		#clock-cells = <0>;
+		clock-div = <1>;
+		clock-mult = <1>;
+	};
+	uart_clk: uart-clk {
+		compatible = "fixed-factor-clock";
+		clocks = <&occ_periph>;
+		#clock-cells = <0>;
+		clock-div = <1>;
+		clock-mult = <1>;
+	};
+	i2c_clk: i2c-clk {
+		compatible = "fixed-factor-clock";
+		clocks = <&occ_periph>;
+		#clock-cells = <0>;
+		clock-div = <1>;
+		clock-mult = <1>;
+		clock-output-names = "i2c_clk";
+	};
+	timer_clk: timer-clk {
+		compatible = "fixed-factor-clock";
+		clocks = <&occ_periph>;
+		#clock-cells = <0>;
+		clock-div = <1>;
+		clock-mult = <1>;
+		clock-output-names = "timer_clk";
+	};
+	gpio_clk: gpio-clk {
+		compatible = "fixed-factor-clock";
+		clocks = <&occ_periph>;
+		#clock-cells = <0>;
+		clock-div = <1>;
+		clock-mult = <1>;
+		clock-output-names = "gpio_clk";
+	};
+	emmc_sys_clk: emmc-sys-clk {
+		compatible = "fixed-factor-clock";
+		clocks = <&pll_per>;
+		#clock-cells = <0>;
+		clock-div = <10>;
+		clock-mult = <1>;
+		clock-output-names = "emmc_sys_clk";
+	};
+	ccf_ctrl_clk: ccf-ctrl-clk {
+		compatible = "fixed-factor-clock";
+		clocks = <&pll_per>;
+		#clock-cells = <0>;
+		clock-div = <4>;
+		clock-mult = <1>;
+		clock-output-names = "ccf_ctrl_clk";
+	};
+	occ_mjpeg_core: occ-mjpeg-core {
+		compatible = "fixed-factor-clock";
+		clocks = <&pll_per>;
+		#clock-cells = <0>;
+		clock-div = <2>;
+		clock-mult = <1>;
+		clock-output-names = "occ_mjpeg_core";
+	};
+	hsm_clk: hsm-clk { /* gate ClkRstGen_hsm */
+		compatible = "fixed-factor-clock";
+		clocks = <&occ_mjpeg_core>;
+		#clock-cells = <0>;
+		clock-div = <1>;
+		clock-mult = <1>;
+		clock-output-names = "hsm_clk";
+	};
+	mjpeg_core_clk: mjpeg-core-clk { /* gate ClkRstGen_mjpeg_gen */
+		compatible = "fixed-factor-clock";
+		clocks = <&occ_mjpeg_core>;
+		#clock-cells = <0>;
+		clock-div = <1>;
+		clock-mult = <1>;
+		clock-output-names = "mjpeg_core_clk";
+	};
+	fcmu_a_clk: fcmu-a-clk {
+		compatible = "fixed-factor-clock";
+		clocks = <&pll_per>;
+		#clock-cells = <0>;
+		clock-div = <20>;
+		clock-mult = <1>;
+		clock-output-names = "fcmu_a_clk";
+	};
+	occ_pci_sys: occ-pci-sys {
+		compatible = "fixed-factor-clock";
+		clocks = <&pll_per>;
+		#clock-cells = <0>;
+		clock-div = <8>;
+		clock-mult = <1>;
+		clock-output-names = "occ_pci_sys";
+	};
+	pclk: pclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <250000000>;  /* 250MHz */
+	};
+	tsu_clk: tsu-clk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <125000000>;  /* 125MHz */
+	};
+};

arch/mips/boot/dts/mobileye/eyeq5.dtsi

+// SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause */
+/*
+* Copyright 2023 Mobileye Vision Technologies Ltd.
+*/
+
+#include <dt-bindings/interrupt-controller/mips-gic.h>
+
+#include "eyeq5-fixed-clocks.dtsi"
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <2>;
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "img,i6500";
+			reg = <0>;
+			clocks = <&core0_clk>;
+		};
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/* These reserved memory regions are also defined in bootmanager
+		* for configuring inbound translation for BARS, don't change
+		* these without syncing with bootmanager
+		*/
+		shmem0_reserved: shmem@804000000 {
+			reg = <0x8 0x04000000 0x0 0x1000000>;
+		};
+		shmem1_reserved: shmem@805000000 {
+			reg = <0x8 0x05000000 0x0 0x1000000>;
+		};
+		pci0_msi_reserved: pci0-msi@806000000 {
+			reg = <0x8 0x06000000 0x0 0x100000>;
+		};
+		pci1_msi_reserved: pci1-msi@806100000 {
+			reg = <0x8 0x06100000 0x0 0x100000>;
+		};
+
+		mini_coredump0_reserved: mini-coredump0@806200000 {
+			reg = <0x8 0x06200000 0x0 0x100000>;
+		};
+		mhm_reserved_0: the-mhm-reserved-0@0 {
+			reg = <0x8 0x00000000 0x0 0x0000800>;
+		};
+	};
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+	};
+
+	cpu_intc: interrupt-controller {
+		compatible = "mti,cpu-interrupt-controller";
+		interrupt-controller;
+		#address-cells = <0>;
+		#interrupt-cells = <1>;
+	};
+
+	soc: soc {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		compatible = "simple-bus";
+
+		uart0: serial@800000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0 0x800000 0x0 0x1000>;
+			reg-io-width = <4>;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SHARED 6 IRQ_TYPE_LEVEL_HIGH>;
+			clocks  = <&uart_clk>, <&occ_periph>;
+			clock-names = "uartclk", "apb_pclk";
+		};
+
+		uart1: serial@900000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0 0x900000 0x0 0x1000>;
+			reg-io-width = <4>;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SHARED 6 IRQ_TYPE_LEVEL_HIGH>;
+			clocks  = <&uart_clk>, <&occ_periph>;
+			clock-names = "uartclk", "apb_pclk";
+		};
+
+		uart2: serial@a00000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0 0xa00000 0x0 0x1000>;
+			reg-io-width = <4>;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SHARED 6 IRQ_TYPE_LEVEL_HIGH>;
+			clocks  = <&uart_clk>, <&occ_periph>;
+			clock-names = "uartclk", "apb_pclk";
+		};
+
+		gic: interrupt-controller@140000 {
+			compatible = "mti,gic";
+			reg = <0x0 0x140000 0x0 0x20000>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+
+			/*
+			* Declare the interrupt-parent even though the mti,gic
+			* binding doesn't require it, such that the kernel can
+			* figure out that cpu_intc is the root interrupt
+			* controller & should be probed first.
+			*/
+			interrupt-parent = <&cpu_intc>;
+
+			timer {
+				compatible = "mti,gic-timer";
+				interrupts = <GIC_LOCAL 1 IRQ_TYPE_NONE>;
+				clocks = <&core0_clk>;
+			};
+		};
+	};
+};

arch/mips/boot/dts/ralink/mt7621.dtsi

@@ -115,14 +115,58 @@ serial0: serial@c00 {
 			compatible = "ns16550a";
 			reg = <0xc00 0x100>;
 
+			reg-io-width = <4>;
+			reg-shift = <2>;
+
 			clocks = <&sysc MT7621_CLK_UART1>;
 
 			interrupt-parent = <&gic>;
 			interrupts = <GIC_SHARED 26 IRQ_TYPE_LEVEL_HIGH>;
 
+			no-loopback-test;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart1_pins>;
+		};
+
+		serial1: serial@d00 {
+			compatible = "ns16550a";
+			reg = <0xd00 0x100>;
+
+			reg-io-width = <4>;
 			reg-shift = <2>;
+
+			clocks = <&sysc MT7621_CLK_UART2>;
+
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SHARED 27 IRQ_TYPE_LEVEL_HIGH>;
+
+			no-loopback-test;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart2_pins>;
+
+			status = "disabled";
+		};
+
+		serial2: serial@e00 {
+			compatible = "ns16550a";
+			reg = <0xe00 0x100>;
+
 			reg-io-width = <4>;
+			reg-shift = <2>;
+
+			clocks = <&sysc MT7621_CLK_UART3>;
+
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SHARED 28 IRQ_TYPE_LEVEL_HIGH>;
+
 			no-loopback-test;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart3_pins>;
+
+			status = "disabled";
 		};
 
 		spi0: spi@b00 {
@@ -263,6 +307,9 @@ usb: usb@1e1c0000 {
 		       0x1e1d0700 0x0100>;
 		reg-names = "mac", "ippc";
 
+		#address-cells = <1>;
+		#size-cells = <0>;
+
 		clocks = <&sysc MT7621_CLK_XTAL>;
 		clock-names = "sys_ck";
 

arch/mips/configs/eyeq5_defconfig

+CONFIG_SYSVIPC=y
+CONFIG_NO_HZ_IDLE=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_BPF_SYSCALL=y
+CONFIG_TASKSTATS=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_MEMCG=y
+CONFIG_BLK_CGROUP=y
+CONFIG_CFS_BANDWIDTH=y
+CONFIG_RT_GROUP_SCHED=y
+CONFIG_CGROUP_PIDS=y
+CONFIG_CGROUP_FREEZER=y
+CONFIG_CPUSETS=y
+CONFIG_CGROUP_DEVICE=y
+CONFIG_CGROUP_CPUACCT=y
+CONFIG_NAMESPACES=y
+CONFIG_USER_NS=y
+CONFIG_SCHED_AUTOGROUP=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_EXPERT=y
+CONFIG_MACH_EYEQ5=y
+CONFIG_FIT_IMAGE_FDT_EPM5=y
+CONFIG_PAGE_SIZE_16KB=y
+CONFIG_MIPS_CPS=y
+CONFIG_CPU_HAS_MSA=y
+CONFIG_NR_CPUS=16
+CONFIG_MIPS_RAW_APPENDED_DTB=y
+CONFIG_JUMP_LABEL=y
+CONFIG_COMPAT_32BIT_TIME=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_TRIM_UNUSED_KSYMS=y
+# CONFIG_COMPAT_BRK is not set
+CONFIG_SPARSEMEM_MANUAL=y
+CONFIG_USERFAULTFD=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_NETFILTER=y
+CONFIG_CAN=y
+CONFIG_PCI=y
+CONFIG_PCI_MSI=y
+CONFIG_PCI_DEBUG=y
+CONFIG_PCI_ENDPOINT=y
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_CONNECTOR=y
+CONFIG_MTD=y
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_BLOCK=y
+CONFIG_SCSI=y
+CONFIG_NETDEVICES=y
+CONFIG_MACVLAN=y
+CONFIG_IPVLAN=y
+CONFIG_MACB=y
+CONFIG_MARVELL_PHY=y
+CONFIG_MICREL_PHY=y
+CONFIG_CAN_M_CAN=y
+CONFIG_SERIAL_AMBA_PL011=y
+CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
+CONFIG_HW_RANDOM=y
+# CONFIG_PTP_1588_CLOCK is not set
+CONFIG_PINCTRL=y
+CONFIG_MFD_SYSCON=y
+CONFIG_HID_A4TECH=y
+CONFIG_HID_BELKIN=y
+CONFIG_HID_CHERRY=y
+CONFIG_HID_CYPRESS=y
+CONFIG_HID_EZKEY=y
+CONFIG_HID_ITE=y
+CONFIG_HID_KENSINGTON=y
+CONFIG_HID_REDRAGON=y
+CONFIG_HID_MICROSOFT=y
+CONFIG_HID_MONTEREY=y
+CONFIG_MMC=y
+CONFIG_MMC_SDHCI=y
+# CONFIG_IOMMU_SUPPORT is not set
+CONFIG_RESET_CONTROLLER=y
+# CONFIG_NVMEM is not set
+CONFIG_EXT4_FS=y
+CONFIG_EXT4_FS_POSIX_ACL=y
+CONFIG_EXT4_FS_SECURITY=y
+CONFIG_FS_ENCRYPTION=y
+CONFIG_FUSE_FS=y
+CONFIG_CUSE=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+CONFIG_UBIFS_FS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+CONFIG_NFS_V4_1=y
+CONFIG_NFS_V4_2=y
+CONFIG_ROOT_NFS=y
+CONFIG_CRYPTO_CRC32_MIPS=y
+CONFIG_FRAME_WARN=1024
+CONFIG_DEBUG_FS=y
+# CONFIG_RCU_TRACE is not set
+# CONFIG_FTRACE is not set
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE="earlycon"

arch/mips/generic/Makefile

@@ -4,9 +4,9 @@
 # Author: Paul Burton <paul.burton@mips.com>
 #
 
-obj-y += init.o
-obj-y += irq.o
-obj-y += proc.o
+obj-$(CONFIG_MACH_GENERIC_CORE) += init.o
+obj-$(CONFIG_MACH_GENERIC_CORE) += irq.o
+obj-$(CONFIG_MACH_GENERIC_CORE) += proc.o
 
 obj-$(CONFIG_YAMON_DT_SHIM)		+= yamon-dt.o
 obj-$(CONFIG_LEGACY_BOARD_SEAD3)	+= board-sead3.o

arch/mips/include/asm/addrspace.h

@@ -47,6 +47,11 @@
  */
 #define KSEGX(a)		((_ACAST32_(a)) & _ACAST32_(0xe0000000))
 
+/*
+ * Gives the size of each kernel segment
+ */
+#define CSEGX_SIZE		0x20000000
+
 /*
  * Returns the physical address of a CKSEGx / XKPHYS address
  */

arch/mips/include/asm/asmmacro.h

@@ -216,27 +216,33 @@
  * Temporary until all gas have MT ASE support
  */
 	.macro	DMT	reg=0
-	.word	0x41600bc1 | (\reg << 16)
+	insn_if_mips	0x41600bc1 | (\reg << 16)
+	insn32_if_mm    0x0000057C | (\reg << 21)
 	.endm
 
 	.macro	EMT	reg=0
-	.word	0x41600be1 | (\reg << 16)
+	insn_if_mips	0x41600be1 | (\reg << 16)
+	insn32_if_mm    0x0000257C | (\reg << 21)
 	.endm
 
 	.macro	DVPE	reg=0
-	.word	0x41600001 | (\reg << 16)
+	insn_if_mips	0x41600001 | (\reg << 16)
+	insn32_if_mm    0x0000157C | (\reg << 21)
 	.endm
 
 	.macro	EVPE	reg=0
-	.word	0x41600021 | (\reg << 16)
+	insn_if_mips	0x41600021 | (\reg << 16)
+	insn32_if_mm    0x0000357C | (\reg << 21)
 	.endm
 
-	.macro	MFTR	rt=0, rd=0, u=0, sel=0
-	 .word	0x41000000 | (\rt << 16) | (\rd << 11) | (\u << 5) | (\sel)
+	.macro	MFTR	rs=0, rt=0, u=0, sel=0
+	insn_if_mips	0x41000000 | (\rt << 16) | (\rs << 11) | (\u << 5) | (\sel)
+	insn32_if_mm	0x0000000E | (\rt << 21) | (\rs << 16) | (\u << 10) | (\sel << 4)
 	.endm
 
-	.macro	MTTR	rt=0, rd=0, u=0, sel=0
-	 .word	0x41800000 | (\rt << 16) | (\rd << 11) | (\u << 5) | (\sel)
+	.macro	MTTR	rt=0, rs=0, u=0, sel=0
+	insn_if_mips	0x41800000 | (\rt << 16) | (\rs << 11) | (\u << 5) | (\sel)
+	insn32_if_mm	0x00000006 | (\rt << 21) | (\rs << 16) | (\u << 10) | (\sel << 4)
 	.endm
 
 #ifdef TOOLCHAIN_SUPPORTS_MSA

arch/mips/include/asm/cdmm.h

@@ -63,7 +63,7 @@ struct mips_cdmm_driver {
  */
 phys_addr_t mips_cdmm_phys_base(void);
 
-extern struct bus_type mips_cdmm_bustype;
+extern const struct bus_type mips_cdmm_bustype;
 void __iomem *mips_cdmm_early_probe(unsigned int dev_type);
 
 #define to_mips_cdmm_device(d)	container_of(d, struct mips_cdmm_device, dev)

arch/mips/include/asm/mach-generic/spaces.h

@@ -49,6 +49,8 @@
 #define HIGHMEM_START		_AC(0x20000000, UL)
 #endif
 
+#define CKSEG0ADDR_OR_64BIT(x)	CKSEG0ADDR(x)
+#define CKSEG1ADDR_OR_64BIT(x)	CKSEG1ADDR(x)
 #endif /* CONFIG_32BIT */
 
 #ifdef CONFIG_64BIT
@@ -82,6 +84,8 @@
 #define TO_CAC(x)		(CAC_BASE   | ((x) & TO_PHYS_MASK))
 #define TO_UNCAC(x)		(UNCAC_BASE | ((x) & TO_PHYS_MASK))
 
+#define CKSEG0ADDR_OR_64BIT(x)	TO_CAC(x)
+#define CKSEG1ADDR_OR_64BIT(x)	TO_UNCAC(x)
 #endif /* CONFIG_64BIT */
 
 /*

arch/mips/include/asm/mips-cm.h

@@ -22,16 +22,28 @@ extern void __iomem *mips_gcr_base;
 extern void __iomem *mips_cm_l2sync_base;
 
 /**
- * __mips_cm_phys_base - retrieve the physical base address of the CM
+ * mips_cm_phys_base - retrieve the physical base address of the CM
  *
  * This function returns the physical base address of the Coherence Manager
  * global control block, or 0 if no Coherence Manager is present. It provides
  * a default implementation which reads the CMGCRBase register where available,
  * and may be overridden by platforms which determine this address in a
- * different way by defining a function with the same prototype except for the
- * name mips_cm_phys_base (without underscores).
+ * different way by defining a function with the same prototype.
  */
-extern phys_addr_t __mips_cm_phys_base(void);
+extern phys_addr_t mips_cm_phys_base(void);
+
+/**
+ * mips_cm_l2sync_phys_base - retrieve the physical base address of the CM
+ *                            L2-sync region
+ *
+ * This function returns the physical base address of the Coherence Manager
+ * L2-cache only region. It provides a default implementation which reads the
+ * CMGCRL2OnlySyncBase register where available or returns a 4K region just
+ * behind the CM GCR base address. It may be overridden by platforms which
+ * determine this address in a different way by defining a function with the
+ * same prototype.
+ */
+extern phys_addr_t mips_cm_l2sync_phys_base(void);
 
 /*
  * mips_cm_is64 - determine CM register width
@@ -311,6 +323,7 @@ GCR_CX_ACCESSOR_RW(32, 0x018, other)
 /* GCR_Cx_RESET_BASE - Configure where powered up cores will fetch from */
 GCR_CX_ACCESSOR_RW(32, 0x020, reset_base)
 #define CM_GCR_Cx_RESET_BASE_BEVEXCBASE		GENMASK(31, 12)
+#define CM_GCR_Cx_RESET_BASE_MODE		BIT(1)
 
 /* GCR_Cx_ID - Identify the current core */
 GCR_CX_ACCESSOR_RO(32, 0x028, id)

arch/mips/include/asm/mips_mt.h

@@ -26,6 +26,6 @@ static inline void mips_mt_set_cpuoptions(void) { }
 #endif
 
 struct class;
-extern struct class *mt_class;
+extern const struct class mt_class;
 
 #endif /* __ASM_MIPS_MT_H */

arch/mips/include/asm/mipsregs.h

@@ -42,59 +42,198 @@
 
 /*
  * Coprocessor 0 register names
+ *
+ * CP0_REGISTER variant is meant to be used in assembly code, C0_REGISTER
+ * variant is meant to be used in C (uasm) code.
  */
-#define CP0_INDEX $0
-#define CP0_RANDOM $1
-#define CP0_ENTRYLO0 $2
-#define CP0_ENTRYLO1 $3
-#define CP0_CONF $3
-#define CP0_GLOBALNUMBER $3, 1
-#define CP0_CONTEXT $4
-#define CP0_PAGEMASK $5
-#define CP0_PAGEGRAIN $5, 1
-#define CP0_SEGCTL0 $5, 2
-#define CP0_SEGCTL1 $5, 3
-#define CP0_SEGCTL2 $5, 4
-#define CP0_WIRED $6
-#define CP0_INFO $7
-#define CP0_HWRENA $7
-#define CP0_BADVADDR $8
-#define CP0_BADINSTR $8, 1
-#define CP0_COUNT $9
-#define CP0_ENTRYHI $10
-#define CP0_GUESTCTL1 $10, 4
-#define CP0_GUESTCTL2 $10, 5
-#define CP0_GUESTCTL3 $10, 6
-#define CP0_COMPARE $11
-#define CP0_GUESTCTL0EXT $11, 4
-#define CP0_STATUS $12
-#define CP0_GUESTCTL0 $12, 6
-#define CP0_GTOFFSET $12, 7
-#define CP0_CAUSE $13
-#define CP0_EPC $14
-#define CP0_PRID $15
-#define CP0_EBASE $15, 1
-#define CP0_CMGCRBASE $15, 3
-#define CP0_CONFIG $16
-#define CP0_CONFIG3 $16, 3
-#define CP0_CONFIG5 $16, 5
-#define CP0_CONFIG6 $16, 6
-#define CP0_LLADDR $17
-#define CP0_WATCHLO $18
-#define CP0_WATCHHI $19
-#define CP0_XCONTEXT $20
-#define CP0_FRAMEMASK $21
-#define CP0_DIAGNOSTIC $22
-#define CP0_DIAGNOSTIC1 $22, 1
-#define CP0_DEBUG $23
-#define CP0_DEPC $24
-#define CP0_PERFORMANCE $25
-#define CP0_ECC $26
-#define CP0_CACHEERR $27
-#define CP0_TAGLO $28
-#define CP0_TAGHI $29
-#define CP0_ERROREPC $30
-#define CP0_DESAVE $31
+#define CP0_INDEX		$0
+#define C0_INDEX		0, 0
+
+#define CP0_RANDOM		$1
+#define C0_RANDOM		1, 0
+
+#define CP0_ENTRYLO0		$2
+#define C0_ENTRYLO0		2, 0
+
+#define CP0_ENTRYLO1		$3
+#define C0_ENTRYLO1		3, 0
+
+#define CP0_CONF		$3
+#define C0_CONF			3, 0
+
+#define CP0_GLOBALNUMBER	$3, 1
+#define C0_GLOBALNUMBER		3, 1
+
+#define CP0_CONTEXT		$4
+#define C0_CONTEXT		4, 0
+
+#define CP0_PAGEMASK		$5
+#define C0_PAGEMASK		5, 0
+
+#define CP0_PAGEGRAIN		$5, 1
+#define C0_PAGEGRAIN		5, 1
+
+#define CP0_SEGCTL0		$5, 2
+#define C0_SEGCTL0		5, 2
+
+#define CP0_SEGCTL1		$5, 3
+#define C0_SEGCTL1		5, 3
+
+#define CP0_SEGCTL2		$5, 4
+#define C0_SEGCTL2		5, 4
+
+#define CP0_PWBASE		$5, 5
+#define C0_PWBASE		5, 5
+
+#define CP0_PWFIELD		$5, 6
+#define C0_PWFIELD		5, 6
+
+#define CP0_PWCTL		$5, 7
+#define C0_PWCTL		5, 7
+
+#define CP0_WIRED		$6
+#define C0_WIRED		6, 0
+
+#define CP0_INFO		$7
+#define C0_INFO			7, 0
+
+#define CP0_HWRENA		$7
+#define C0_HWRENA		7, 0
+
+#define CP0_BADVADDR		$8
+#define C0_BADVADDR		8, 0
+
+#define CP0_BADINSTR		$8, 1
+#define C0_BADINSTR		8, 1
+
+#define CP0_BADINSTRP		$8, 2
+#define C0_BADINSTRP		8, 2
+
+#define CP0_COUNT		$9
+#define C0_COUNT		9, 0
+
+#define CP0_PGD			$9, 7
+#define C0_PGD			9, 7
+
+#define CP0_ENTRYHI		$10
+#define C0_ENTRYHI		10, 0
+
+#define CP0_GUESTCTL1		$10, 4
+#define C0_GUESTCTL1		10, 5
+
+#define CP0_GUESTCTL2		$10, 5
+#define C0_GUESTCTL2		10, 5
+
+#define CP0_GUESTCTL3		$10, 6
+#define C0_GUESTCTL3		10, 6
+
+#define CP0_COMPARE		$11
+#define C0_COMPARE		11, 0
+
+#define CP0_GUESTCTL0EXT	$11, 4
+#define C0_GUESTCTL0EXT		11, 4
+
+#define CP0_STATUS		$12
+#define C0_STATUS		12, 0
+
+#define CP0_GUESTCTL0		$12, 6
+#define C0_GUESTCTL0		12, 6
+
+#define CP0_GTOFFSET		$12, 7
+#define C0_GTOFFSET		12, 7
+
+#define CP0_CAUSE		$13
+#define C0_CAUSE		13, 0
+
+#define CP0_EPC			$14
+#define C0_EPC			14, 0
+
+#define CP0_PRID		$15
+#define C0_PRID			15, 0
+
+#define CP0_EBASE		$15, 1
+#define C0_EBASE		15, 1
+
+#define CP0_CMGCRBASE		$15, 3
+#define C0_CMGCRBASE		15, 3
+
+#define CP0_CONFIG		$16
+#define C0_CONFIG		16, 0
+
+#define CP0_CONFIG1		$16, 1
+#define C0_CONFIG1		16, 1
+
+#define CP0_CONFIG2		$16, 2
+#define C0_CONFIG2		16, 2
+
+#define CP0_CONFIG3		$16, 3
+#define C0_CONFIG3		16, 3
+
+#define CP0_CONFIG4		$16, 4
+#define C0_CONFIG4		16, 4
+
+#define CP0_CONFIG5		$16, 5
+#define C0_CONFIG5		16, 5
+
+#define CP0_CONFIG6		$16, 6
+#define C0_CONFIG6		16, 6
+
+#define CP0_LLADDR		$17
+#define C0_LLADDR		17, 0
+
+#define CP0_WATCHLO		$18
+#define C0_WATCHLO		18, 0
+
+#define CP0_WATCHHI		$19
+#define C0_WATCHHI		19, 0
+
+#define CP0_XCONTEXT		$20
+#define C0_XCONTEXT		20, 0
+
+#define CP0_FRAMEMASK		$21
+#define C0_FRAMEMASK		21, 0
+
+#define CP0_DIAGNOSTIC		$22
+#define C0_DIAGNOSTIC		22, 0
+
+#define CP0_DIAGNOSTIC1		$22, 1
+#define C0_DIAGNOSTIC1		22, 1
+
+#define CP0_DEBUG		$23
+#define C0_DEBUG		23, 0
+
+#define CP0_DEPC		$24
+#define C0_DEPC			24, 0
+
+#define CP0_PERFORMANCE		$25
+#define C0_PERFORMANCE		25, 0
+
+#define CP0_ECC			$26
+#define C0_ECC			26, 0
+
+#define CP0_CACHEERR		$27
+#define C0_CACHEERR		27, 0
+
+#define CP0_TAGLO		$28
+#define C0_TAGLO		28, 0
+
+#define CP0_DTAGLO		$28, 2
+#define C0_DTAGLO		28, 2
+
+#define CP0_DDATALO		$28, 3
+#define C0_DDATALO		28, 3
+
+#define CP0_STAGLO		$28, 4
+#define C0_STAGLO		28, 4
+
+#define CP0_TAGHI		$29
+#define C0_TAGHI		29, 0
+
+#define CP0_ERROREPC		$30
+#define C0_ERROREPC		30, 0
+
+#define CP0_DESAVE		$31
+#define C0_DESAVE		31, 0
 
 /*
  * R4640/R4650 cp0 register names.  These registers are listed
@@ -291,6 +430,12 @@
 #define ST0_DE			0x00010000
 #define ST0_CE			0x00020000
 
+#ifdef CONFIG_64BIT
+#define ST0_KX_IF_64	ST0_KX
+#else
+#define ST0_KX_IF_64	0
+#endif
+
 /*
  * Setting c0_status.co enables Hit_Writeback and Hit_Writeback_Invalidate
  * cacheops in userspace.  This bit exists only on RM7000 and RM9000
@@ -1277,11 +1422,13 @@ static inline int mm_insn_16bit(u16 insn)
  */
 
 /* Match an individual register number and assign to \var */
-#define _IFC_REG(n)				\
-	".ifc	\\r, $" #n "\n\t"		\
+#define _IFC_REG_NAME(name, n)			\
+	".ifc	\\r, $" #name "\n\t"		\
 	"\\var	= " #n "\n\t"			\
 	".endif\n\t"
 
+#define _IFC_REG(n)	_IFC_REG_NAME(n, n)
+
 #define _ASM_SET_PARSE_R						\
 	".macro	parse_r var r\n\t"					\
 	"\\var	= -1\n\t"						\
@@ -1293,6 +1440,7 @@ static inline int mm_insn_16bit(u16 insn)
 	_IFC_REG(20) _IFC_REG(21) _IFC_REG(22) _IFC_REG(23)		\
 	_IFC_REG(24) _IFC_REG(25) _IFC_REG(26) _IFC_REG(27)		\
 	_IFC_REG(28) _IFC_REG(29) _IFC_REG(30) _IFC_REG(31)		\
+	_IFC_REG_NAME(sp, 29) _IFC_REG_NAME(fp, 30)			\
 	".iflt	\\var\n\t"						\
 	".error	\"Unable to parse register name \\r\"\n\t"		\
 	".endif\n\t"							\
@@ -1307,6 +1455,15 @@ static inline int mm_insn_16bit(u16 insn)
  * the ENC encodings.
  */
 
+/* Instructions with 1 register operand */
+#define _ASM_MACRO_1R(OP, R1, ENC)				\
+		".macro	" #OP " " #R1 "\n\t"			\
+		_ASM_SET_PARSE_R					\
+		"parse_r __" #R1 ", \\" #R1 "\n\t"			\
+		ENC							\
+		_ASM_UNSET_PARSE_R					\
+		".endm\n\t"
+
 /* Instructions with 1 register operand & 1 immediate operand */
 #define _ASM_MACRO_1R1I(OP, R1, I2, ENC)				\
 		".macro	" #OP " " #R1 ", " #I2 "\n\t"			\
@@ -2078,7 +2235,14 @@ do {									\
 		_ASM_INSN_IF_MIPS(0x4200000c)				\
 		_ASM_INSN32_IF_MM(0x0000517c)
 #else	/* !TOOLCHAIN_SUPPORTS_VIRT */
-#define _ASM_SET_VIRT ".set\tvirt\n\t"
+#if MIPS_ISA_REV >= 5
+#define _ASM_SET_VIRT_ISA
+#elif defined(CONFIG_64BIT)
+#define _ASM_SET_VIRT_ISA ".set\tmips64r5\n\t"
+#else
+#define _ASM_SET_VIRT_ISA ".set\tmips32r5\n\t"
+#endif
+#define _ASM_SET_VIRT _ASM_SET_VIRT_ISA ".set\tvirt\n\t"
 #define _ASM_SET_MFGC0	_ASM_SET_VIRT
 #define _ASM_SET_DMFGC0	_ASM_SET_VIRT
 #define _ASM_SET_MTGC0	_ASM_SET_VIRT
@@ -2099,7 +2263,6 @@ do {									\
 ({ int __res;								\
 	__asm__ __volatile__(						\
 		".set\tpush\n\t"					\
-		".set\tmips32r5\n\t"					\
 		_ASM_SET_MFGC0						\
 		"mfgc0\t%0, " #source ", %1\n\t"			\
 		_ASM_UNSET_MFGC0					\
@@ -2113,7 +2276,6 @@ do {									\
 ({ unsigned long long __res;						\
 	__asm__ __volatile__(						\
 		".set\tpush\n\t"					\
-		".set\tmips64r5\n\t"					\
 		_ASM_SET_DMFGC0						\
 		"dmfgc0\t%0, " #source ", %1\n\t"			\
 		_ASM_UNSET_DMFGC0					\
@@ -2127,7 +2289,6 @@ do {									\
 do {									\
 	__asm__ __volatile__(						\
 		".set\tpush\n\t"					\
-		".set\tmips32r5\n\t"					\
 		_ASM_SET_MTGC0						\
 		"mtgc0\t%z0, " #register ", %1\n\t"			\
 		_ASM_UNSET_MTGC0					\
@@ -2140,7 +2301,6 @@ do {									\
 do {									\
 	__asm__ __volatile__(						\
 		".set\tpush\n\t"					\
-		".set\tmips64r5\n\t"					\
 		_ASM_SET_DMTGC0						\
 		"dmtgc0\t%z0, " #register ", %1\n\t"			\
 		_ASM_UNSET_DMTGC0					\

arch/mips/include/asm/regdef.h

@@ -16,6 +16,96 @@
 
 #if _MIPS_SIM == _MIPS_SIM_ABI32
 
+/*
+ * General purpose register numbers for 32 bit ABI
+ */
+#define GPR_ZERO	0	/* wired zero */
+#define GPR_AT	1	/* assembler temp */
+#define GPR_V0	2	/* return value */
+#define GPR_V1	3
+#define GPR_A0	4	/* argument registers */
+#define GPR_A1	5
+#define GPR_A2	6
+#define GPR_A3	7
+#define GPR_T0	8	/* caller saved */
+#define GPR_T1	9
+#define GPR_T2	10
+#define GPR_T3	11
+#define GPR_T4	12
+#define GPR_TA0	12
+#define GPR_T5	13
+#define GPR_TA1	13
+#define GPR_T6	14
+#define GPR_TA2	14
+#define GPR_T7	15
+#define GPR_TA3	15
+#define GPR_S0	16	/* callee saved */
+#define GPR_S1	17
+#define GPR_S2	18
+#define GPR_S3	19
+#define GPR_S4	20
+#define GPR_S5	21
+#define GPR_S6	22
+#define GPR_S7	23
+#define GPR_T8	24	/* caller saved */
+#define GPR_T9	25
+#define GPR_JP	25	/* PIC jump register */
+#define GPR_K0	26	/* kernel scratch */
+#define GPR_K1	27
+#define GPR_GP	28	/* global pointer */
+#define GPR_SP	29	/* stack pointer */
+#define GPR_FP	30	/* frame pointer */
+#define GPR_S8	30	/* same like fp! */
+#define GPR_RA	31	/* return address */
+
+#endif /* _MIPS_SIM == _MIPS_SIM_ABI32 */
+
+#if _MIPS_SIM == _MIPS_SIM_ABI64 || _MIPS_SIM == _MIPS_SIM_NABI32
+
+#define GPR_ZERO	0	/* wired zero */
+#define GPR_AT	1	/* assembler temp */
+#define GPR_V0	2	/* return value - caller saved */
+#define GPR_V1	3
+#define GPR_A0	4	/* argument registers */
+#define GPR_A1	5
+#define GPR_A2	6
+#define GPR_A3	7
+#define GPR_A4	8	/* arg reg 64 bit; caller saved in 32 bit */
+#define GPR_TA0	8
+#define GPR_A5	9
+#define GPR_TA1	9
+#define GPR_A6	10
+#define GPR_TA2	10
+#define GPR_A7	11
+#define GPR_TA3	11
+#define GPR_T0	12	/* caller saved */
+#define GPR_T1	13
+#define GPR_T2	14
+#define GPR_T3	15
+#define GPR_S0	16	/* callee saved */
+#define GPR_S1	17
+#define GPR_S2	18
+#define GPR_S3	19
+#define GPR_S4	20
+#define GPR_S5	21
+#define GPR_S6	22
+#define GPR_S7	23
+#define GPR_T8	24	/* caller saved */
+#define GPR_T9	25	/* callee address for PIC/temp */
+#define GPR_JP	25	/* PIC jump register */
+#define GPR_K0	26	/* kernel temporary */
+#define GPR_K1	27
+#define GPR_GP	28	/* global pointer - caller saved for PIC */
+#define GPR_SP	29	/* stack pointer */
+#define GPR_FP	30	/* frame pointer */
+#define GPR_S8	30	/* callee saved */
+#define GPR_RA	31	/* return address */
+
+#endif /* _MIPS_SIM == _MIPS_SIM_ABI64 || _MIPS_SIM == _MIPS_SIM_NABI32 */
+
+#ifdef __ASSEMBLY__
+#if _MIPS_SIM == _MIPS_SIM_ABI32
+
 /*
  * Symbolic register names for 32 bit ABI
  */
@@ -102,5 +192,6 @@
 #define ra	$31	/* return address */
 
 #endif /* _MIPS_SIM == _MIPS_SIM_ABI64 || _MIPS_SIM == _MIPS_SIM_NABI32 */
+#endif /* __ASSEMBLY__ */
 
 #endif /* _ASM_REGDEF_H */

arch/mips/include/asm/smp-cps.h

@@ -24,7 +24,7 @@ struct core_boot_config {
 
 extern struct core_boot_config *mips_cps_core_bootcfg;
 
-extern void mips_cps_core_entry(void);
+extern void mips_cps_core_boot(int cca, void __iomem *gcr_base);
 extern void mips_cps_core_init(void);
 
 extern void mips_cps_boot_vpes(struct core_boot_config *cfg, unsigned vpe);
@@ -32,7 +32,12 @@ extern void mips_cps_boot_vpes(struct core_boot_config *cfg, unsigned vpe);
 extern void mips_cps_pm_save(void);
 extern void mips_cps_pm_restore(void);
 
-extern void *mips_cps_core_entry_patch_end;
+extern void excep_tlbfill(void);
+extern void excep_xtlbfill(void);
+extern void excep_cache(void);
+extern void excep_genex(void);
+extern void excep_intex(void);
+extern void excep_ejtag(void);
 
 #ifdef CONFIG_MIPS_CPS
 

arch/mips/kernel/cps-vec.S

@@ -4,6 +4,7 @@
  * Author: Paul Burton <paul.burton@mips.com>
  */
 
+#include <linux/init.h>
 #include <asm/addrspace.h>
 #include <asm/asm.h>
 #include <asm/asm-offsets.h>
@@ -82,39 +83,10 @@
 	.endm
 
 
-.balign 0x1000
-
-LEAF(mips_cps_core_entry)
-	/*
-	 * These first several instructions will be patched by cps_smp_setup to load the
-	 * CCA to use into register s0 and GCR base address to register s1.
-	 */
-	.rept   CPS_ENTRY_PATCH_INSNS
-	nop
-	.endr
-
-	.global mips_cps_core_entry_patch_end
-mips_cps_core_entry_patch_end:
-
-	/* Check whether we're here due to an NMI */
-	mfc0	k0, CP0_STATUS
-	and	k0, k0, ST0_NMI
-	beqz	k0, not_nmi
-	 nop
-
-	/* This is an NMI */
-	PTR_LA	k0, nmi_handler
-	jr	k0
-	 nop
-
-not_nmi:
-	/* Setup Cause */
-	li	t0, CAUSEF_IV
-	mtc0	t0, CP0_CAUSE
-
-	/* Setup Status */
-	li	t0, ST0_CU1 | ST0_CU0 | ST0_BEV | STATUS_BITDEPS
-	mtc0	t0, CP0_STATUS
+LEAF(mips_cps_core_boot)
+	/* Save  CCA and GCR base */
+	move   s0, a0
+	move   s1, a1
 
 	/* We don't know how to do coherence setup on earlier ISA */
 #if MIPS_ISA_REV > 0
@@ -178,49 +150,45 @@ not_nmi:
 	PTR_L	sp, VPEBOOTCFG_SP(v1)
 	jr	t1
 	 nop
-	END(mips_cps_core_entry)
+	END(mips_cps_core_boot)
 
-.org 0x200
+	__INIT
 LEAF(excep_tlbfill)
 	DUMP_EXCEP("TLB Fill")
 	b	.
 	 nop
 	END(excep_tlbfill)
 
-.org 0x280
 LEAF(excep_xtlbfill)
 	DUMP_EXCEP("XTLB Fill")
 	b	.
 	 nop
 	END(excep_xtlbfill)
 
-.org 0x300
 LEAF(excep_cache)
 	DUMP_EXCEP("Cache")
 	b	.
 	 nop
 	END(excep_cache)
 
-.org 0x380
 LEAF(excep_genex)
 	DUMP_EXCEP("General")
 	b	.
 	 nop
 	END(excep_genex)
 
-.org 0x400
 LEAF(excep_intex)
 	DUMP_EXCEP("Interrupt")
 	b	.
 	 nop
 	END(excep_intex)
 
-.org 0x480
 LEAF(excep_ejtag)
 	PTR_LA	k0, ejtag_debug_handler
 	jr	k0
 	 nop
 	END(excep_ejtag)
+	__FINIT
 
 LEAF(mips_cps_core_init)
 #ifdef CONFIG_MIPS_MT_SMP
@@ -428,7 +396,7 @@ LEAF(mips_cps_boot_vpes)
 	/* Calculate a pointer to the VPEs struct vpe_boot_config */
 	li	t0, VPEBOOTCFG_SIZE
 	mul	t0, t0, ta1
-	addu	t0, t0, ta3
+	PTR_ADDU t0, t0, ta3
 
 	/* Set the TC restart PC */
 	lw	t1, VPEBOOTCFG_PC(t0)
@@ -603,10 +571,10 @@ dcache_done:
 	lw	$1, TI_CPU(gp)
 	sll	$1, $1, LONGLOG
 	PTR_LA	\dest, __per_cpu_offset
-	addu	$1, $1, \dest
+	PTR_ADDU $1, $1, \dest
 	lw	$1, 0($1)
 	PTR_LA	\dest, cps_cpu_state
-	addu	\dest, \dest, $1
+	PTR_ADDU \dest, \dest, $1
 	.set	pop
 	.endm
 

arch/mips/kernel/mips-cm.c

@@ -179,7 +179,7 @@ static char *cm3_causes[32] = {
 static DEFINE_PER_CPU_ALIGNED(spinlock_t, cm_core_lock);
 static DEFINE_PER_CPU_ALIGNED(unsigned long, cm_core_lock_flags);
 
-phys_addr_t __mips_cm_phys_base(void)
+phys_addr_t __weak mips_cm_phys_base(void)
 {
 	unsigned long cmgcr;
 
@@ -198,10 +198,7 @@ phys_addr_t __mips_cm_phys_base(void)
 	return (cmgcr & MIPS_CMGCRF_BASE) << (36 - 32);
 }
 
-phys_addr_t mips_cm_phys_base(void)
-	__attribute__((weak, alias("__mips_cm_phys_base")));
-
-static phys_addr_t __mips_cm_l2sync_phys_base(void)
+phys_addr_t __weak mips_cm_l2sync_phys_base(void)
 {
 	u32 base_reg;
 
@@ -217,9 +214,6 @@ static phys_addr_t __mips_cm_l2sync_phys_base(void)
 	return mips_cm_phys_base() + MIPS_CM_GCR_SIZE;
 }
 
-phys_addr_t mips_cm_l2sync_phys_base(void)
-	__attribute__((weak, alias("__mips_cm_l2sync_phys_base")));
-
 static void mips_cm_probe_l2sync(void)
 {
 	unsigned major_rev;

arch/mips/kernel/mips-mt.c

@@ -229,19 +229,13 @@ void mips_mt_set_cpuoptions(void)
 	}
 }
 
-struct class *mt_class;
+const struct class mt_class = {
+	.name = "mt",
+};
 
 static int __init mips_mt_init(void)
 {
-	struct class *mtc;
-
-	mtc = class_create("mt");
-	if (IS_ERR(mtc))
-		return PTR_ERR(mtc);
-
-	mt_class = mtc;
-
-	return 0;
+	return class_register(&mt_class);
 }
 
 subsys_initcall(mips_mt_init);

arch/mips/kernel/rtlx-mt.c

@@ -95,11 +95,11 @@ int __init rtlx_module_init(void)
 		atomic_set(&channel_wqs[i].in_open, 0);
 		mutex_init(&channel_wqs[i].mutex);
 
-		dev = device_create(mt_class, NULL, MKDEV(major, i), NULL,
+		dev = device_create(&mt_class, NULL, MKDEV(major, i), NULL,
 				    "%s%d", RTLX_MODULE_NAME, i);
 		if (IS_ERR(dev)) {
 			while (i--)
-				device_destroy(mt_class, MKDEV(major, i));
+				device_destroy(&mt_class, MKDEV(major, i));
 
 			err = PTR_ERR(dev);
 			goto out_chrdev;
@@ -127,7 +127,7 @@ int __init rtlx_module_init(void)
 
 out_class:
 	for (i = 0; i < RTLX_CHANNELS; i++)
-		device_destroy(mt_class, MKDEV(major, i));
+		device_destroy(&mt_class, MKDEV(major, i));
 out_chrdev:
 	unregister_chrdev(major, RTLX_MODULE_NAME);
 
@@ -139,7 +139,7 @@ void __exit rtlx_module_exit(void)
 	int i;
 
 	for (i = 0; i < RTLX_CHANNELS; i++)
-		device_destroy(mt_class, MKDEV(major, i));
+		device_destroy(&mt_class, MKDEV(major, i));
 
 	unregister_chrdev(major, RTLX_MODULE_NAME);
 

arch/mips/kernel/smp-cps.c

@@ -7,6 +7,7 @@
 #include <linux/cpu.h>
 #include <linux/delay.h>
 #include <linux/io.h>
+#include <linux/memblock.h>
 #include <linux/sched/task_stack.h>
 #include <linux/sched/hotplug.h>
 #include <linux/slab.h>
@@ -20,12 +21,24 @@
 #include <asm/mipsregs.h>
 #include <asm/pm-cps.h>
 #include <asm/r4kcache.h>
+#include <asm/regdef.h>
 #include <asm/smp.h>
 #include <asm/smp-cps.h>
 #include <asm/time.h>
 #include <asm/uasm.h>
 
+#define BEV_VEC_SIZE	0x500
+#define BEV_VEC_ALIGN	0x1000
+
+enum label_id {
+	label_not_nmi = 1,
+};
+
+UASM_L_LA(_not_nmi)
+
 static DECLARE_BITMAP(core_power, NR_CPUS);
+static uint32_t core_entry_reg;
+static phys_addr_t cps_vec_pa;
 
 struct core_boot_config *mips_cps_core_bootcfg;
 
@@ -34,10 +47,100 @@ static unsigned __init core_vpe_count(unsigned int cluster, unsigned core)
 	return min(smp_max_threads, mips_cps_numvps(cluster, core));
 }
 
+static void __init *mips_cps_build_core_entry(void *addr)
+{
+	extern void (*nmi_handler)(void);
+	u32 *p = addr;
+	u32 val;
+	struct uasm_label labels[2];
+	struct uasm_reloc relocs[2];
+	struct uasm_label *l = labels;
+	struct uasm_reloc *r = relocs;
+
+	memset(labels, 0, sizeof(labels));
+	memset(relocs, 0, sizeof(relocs));
+
+	uasm_i_mfc0(&p, GPR_K0, C0_STATUS);
+	UASM_i_LA(&p, GPR_T9, ST0_NMI);
+	uasm_i_and(&p, GPR_K0, GPR_K0, GPR_T9);
+
+	uasm_il_bnez(&p, &r, GPR_K0, label_not_nmi);
+	uasm_i_nop(&p);
+	UASM_i_LA(&p, GPR_K0, (long)&nmi_handler);
+
+	uasm_l_not_nmi(&l, p);
+
+	val = CAUSEF_IV;
+	uasm_i_lui(&p, GPR_K0, val >> 16);
+	uasm_i_ori(&p, GPR_K0, GPR_K0, val & 0xffff);
+	uasm_i_mtc0(&p, GPR_K0, C0_CAUSE);
+	val = ST0_CU1 | ST0_CU0 | ST0_BEV | ST0_KX_IF_64;
+	uasm_i_lui(&p, GPR_K0, val >> 16);
+	uasm_i_ori(&p, GPR_K0, GPR_K0, val & 0xffff);
+	uasm_i_mtc0(&p, GPR_K0, C0_STATUS);
+	uasm_i_ehb(&p);
+	uasm_i_ori(&p, GPR_A0, 0, read_c0_config() & CONF_CM_CMASK);
+	UASM_i_LA(&p, GPR_A1, (long)mips_gcr_base);
+#if defined(KBUILD_64BIT_SYM32) || defined(CONFIG_32BIT)
+	UASM_i_LA(&p, GPR_T9, CKSEG1ADDR(__pa_symbol(mips_cps_core_boot)));
+#else
+	UASM_i_LA(&p, GPR_T9, TO_UNCAC(__pa_symbol(mips_cps_core_boot)));
+#endif
+	uasm_i_jr(&p, GPR_T9);
+	uasm_i_nop(&p);
+
+	uasm_resolve_relocs(relocs, labels);
+
+	return p;
+}
+
+static int __init allocate_cps_vecs(void)
+{
+	/* Try to allocate in KSEG1 first */
+	cps_vec_pa = memblock_phys_alloc_range(BEV_VEC_SIZE, BEV_VEC_ALIGN,
+						0x0, CSEGX_SIZE - 1);
+
+	if (cps_vec_pa)
+		core_entry_reg = CKSEG1ADDR(cps_vec_pa) &
+					CM_GCR_Cx_RESET_BASE_BEVEXCBASE;
+
+	if (!cps_vec_pa && mips_cm_is64) {
+		cps_vec_pa = memblock_phys_alloc_range(BEV_VEC_SIZE, BEV_VEC_ALIGN,
+							0x0, SZ_4G - 1);
+		if (cps_vec_pa)
+			core_entry_reg = (cps_vec_pa & CM_GCR_Cx_RESET_BASE_BEVEXCBASE) |
+					CM_GCR_Cx_RESET_BASE_MODE;
+	}
+
+	if (!cps_vec_pa)
+		return -ENOMEM;
+
+	return 0;
+}
+
+static void __init setup_cps_vecs(void)
+{
+	void *cps_vec;
+
+	cps_vec = (void *)CKSEG1ADDR_OR_64BIT(cps_vec_pa);
+	mips_cps_build_core_entry(cps_vec);
+
+	memcpy(cps_vec + 0x200, &excep_tlbfill, 0x80);
+	memcpy(cps_vec + 0x280, &excep_xtlbfill, 0x80);
+	memcpy(cps_vec + 0x300, &excep_cache, 0x80);
+	memcpy(cps_vec + 0x380, &excep_genex, 0x80);
+	memcpy(cps_vec + 0x400, &excep_intex, 0x80);
+	memcpy(cps_vec + 0x480, &excep_ejtag, 0x80);
+
+	/* Make sure no prefetched data in cache */
+	blast_inv_dcache_range(CKSEG0ADDR_OR_64BIT(cps_vec_pa), CKSEG0ADDR_OR_64BIT(cps_vec_pa) + BEV_VEC_SIZE);
+	bc_inv(CKSEG0ADDR_OR_64BIT(cps_vec_pa), BEV_VEC_SIZE);
+	__sync();
+}
+
 static void __init cps_smp_setup(void)
 {
 	unsigned int nclusters, ncores, nvpes, core_vpes;
-	unsigned long core_entry;
 	int cl, c, v;
 
 	/* Detect & record VPE topology */
@@ -94,10 +197,11 @@ static void __init cps_smp_setup(void)
 	/* Make core 0 coherent with everything */
 	write_gcr_cl_coherence(0xff);
 
-	if (mips_cm_revision() >= CM_REV_CM3) {
-		core_entry = CKSEG1ADDR((unsigned long)mips_cps_core_entry);
-		write_gcr_bev_base(core_entry);
-	}
+	if (allocate_cps_vecs())
+		pr_err("Failed to allocate CPS vectors\n");
+
+	if (core_entry_reg && mips_cm_revision() >= CM_REV_CM3)
+		write_gcr_bev_base(core_entry_reg);
 
 #ifdef CONFIG_MIPS_MT_FPAFF
 	/* If we have an FPU, enroll ourselves in the FPU-full mask */
@@ -110,10 +214,14 @@ static void __init cps_prepare_cpus(unsigned int max_cpus)
 {
 	unsigned ncores, core_vpes, c, cca;
 	bool cca_unsuitable, cores_limited;
-	u32 *entry_code;
 
 	mips_mt_set_cpuoptions();
 
+	if (!core_entry_reg) {
+		pr_err("core_entry address unsuitable, disabling smp-cps\n");
+		goto err_out;
+	}
+
 	/* Detect whether the CCA is unsuited to multi-core SMP */
 	cca = read_c0_config() & CONF_CM_CMASK;
 	switch (cca) {
@@ -145,20 +253,7 @@ static void __init cps_prepare_cpus(unsigned int max_cpus)
 			(cca_unsuitable && cpu_has_dc_aliases) ? " & " : "",
 			cpu_has_dc_aliases ? "dcache aliasing" : "");
 
-	/*
-	 * Patch the start of mips_cps_core_entry to provide:
-	 *
-	 * s0 = kseg0 CCA
-	 */
-	entry_code = (u32 *)&mips_cps_core_entry;
-	uasm_i_addiu(&entry_code, 16, 0, cca);
-	UASM_i_LA(&entry_code, 17, (long)mips_gcr_base);
-	BUG_ON((void *)entry_code > (void *)&mips_cps_core_entry_patch_end);
-	blast_dcache_range((unsigned long)&mips_cps_core_entry,
-			   (unsigned long)entry_code);
-	bc_wback_inv((unsigned long)&mips_cps_core_entry,
-		     (void *)entry_code - (void *)&mips_cps_core_entry);
-	__sync();
+	setup_cps_vecs();
 
 	/* Allocate core boot configuration structs */
 	ncores = mips_cps_numcores(0);
@@ -213,7 +308,7 @@ static void boot_core(unsigned int core, unsigned int vpe_id)
 	mips_cm_lock_other(0, core, 0, CM_GCR_Cx_OTHER_BLOCK_LOCAL);
 
 	/* Set its reset vector */
-	write_gcr_co_reset_base(CKSEG1ADDR((unsigned long)mips_cps_core_entry));
+	write_gcr_co_reset_base(core_entry_reg);
 
 	/* Ensure its coherency is disabled */
 	write_gcr_co_coherence(0);
@@ -290,7 +385,6 @@ static int cps_boot_secondary(int cpu, struct task_struct *idle)
 	unsigned vpe_id = cpu_vpe_id(&cpu_data[cpu]);
 	struct core_boot_config *core_cfg = &mips_cps_core_bootcfg[core];
 	struct vpe_boot_config *vpe_cfg = &core_cfg->vpe_config[vpe_id];
-	unsigned long core_entry;
 	unsigned int remote;
 	int err;
 
@@ -314,8 +408,7 @@ static int cps_boot_secondary(int cpu, struct task_struct *idle)
 
 	if (cpu_has_vp) {
 		mips_cm_lock_other(0, core, vpe_id, CM_GCR_Cx_OTHER_BLOCK_LOCAL);
-		core_entry = CKSEG1ADDR((unsigned long)mips_cps_core_entry);
-		write_gcr_co_reset_base(core_entry);
+		write_gcr_co_reset_base(core_entry_reg);
 		mips_cm_unlock_other();
 	}
 

arch/mips/kernel/traps.c

@@ -58,6 +58,7 @@
 #include <asm/module.h>
 #include <asm/msa.h>
 #include <asm/ptrace.h>
+#include <asm/regdef.h>
 #include <asm/sections.h>
 #include <asm/siginfo.h>
 #include <asm/tlbdebug.h>
@@ -2041,13 +2042,12 @@ void __init *set_except_vector(int n, void *addr)
 		unsigned long jump_mask = ~((1 << 28) - 1);
 #endif
 		u32 *buf = (u32 *)(ebase + 0x200);
-		unsigned int k0 = 26;
 		if ((handler & jump_mask) == ((ebase + 0x200) & jump_mask)) {
 			uasm_i_j(&buf, handler & ~jump_mask);
 			uasm_i_nop(&buf);
 		} else {
-			UASM_i_LA(&buf, k0, handler);
-			uasm_i_jr(&buf, k0);
+			UASM_i_LA(&buf, GPR_K0, handler);
+			uasm_i_jr(&buf, GPR_K0);
 			uasm_i_nop(&buf);
 		}
 		local_flush_icache_range(ebase + 0x200, (unsigned long)buf);
@@ -2299,7 +2299,7 @@ static const char panic_null_cerr[] =
 void set_uncached_handler(unsigned long offset, void *addr,
 	unsigned long size)
 {
-	unsigned long uncached_ebase = CKSEG1ADDR(ebase);
+	unsigned long uncached_ebase = CKSEG1ADDR_OR_64BIT(__pa(ebase));
 
 	if (!addr)
 		panic(panic_null_cerr);
@@ -2351,10 +2351,13 @@ void __init trap_init(void)
 		 * EVA is special though as it allows segments to be rearranged
 		 * and to become uncached during cache error handling.
 		 */
-		if (!IS_ENABLED(CONFIG_EVA) && !WARN_ON(ebase_pa >= 0x20000000))
+		if (!IS_ENABLED(CONFIG_EVA) && ebase_pa < 0x20000000)
 			ebase = CKSEG0ADDR(ebase_pa);
 		else
 			ebase = (unsigned long)phys_to_virt(ebase_pa);
+		if (ebase_pa >= 0x20000000)
+			pr_warn("ebase(%pa) should better be in KSeg0",
+				&ebase_pa);
 	}
 
 	if (cpu_has_mmips) {

arch/mips/kernel/vpe-mt.c

@@ -95,8 +95,8 @@ int vpe_run(struct vpe *v)
 	 * We don't pass the memsize here, so VPE programs need to be
 	 * compiled with DFLT_STACK_SIZE and DFLT_HEAP_SIZE defined.
 	 */
-	mttgpr(7, 0);
-	mttgpr(6, v->ntcs);
+	mttgpr($7, 0);
+	mttgpr($6, v->ntcs);
 
 	/* set up VPE1 */
 	/*

arch/mips/mobileye/Makefile

+# SPDX-License-Identifier: GPL-2.0-or-later

arch/mips/mobileye/Platform

+#
+# Copyright (C) 2016 Imagination Technologies
+# Author: Paul Burton <paul.burton@mips.com>
+#
+# This program is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by the
+# Free Software Foundation;  either version 2 of the  License, or (at your
+# option) any later version.
+#
+
+load-$(CONFIG_MACH_EYEQ5)	= 0xa800000808000000
+all-$(CONFIG_MACH_EYEQ5)	+= vmlinux.gz.itb
+
+its-y					:= vmlinux.its.S
+its-$(CONFIG_FIT_IMAGE_FDT_EPM5)	+= board-epm5.its.S

arch/mips/mobileye/board-epm5.its.S

+/* SPDX-License-Identifier: (GPL-2.0 OR MIT) */
+/ {
+	images {
+		fdt-mobileye-epm5 {
+			description = "Mobileeye MP5 Device Tree";
+			data = /incbin/("boot/dts/mobileye/eyeq5-epm5.dtb");
+			type = "flat_dt";
+			arch = "mips";
+			compression = "none";
+			hash {
+				algo = "sha1";
+			};
+		};
+	};
+
+    configurations {
+		default = "conf-1";
+		conf-1 {
+			description = "Mobileye EPM5 Linux kernel";
+			kernel = "kernel";
+			fdt = "fdt-mobileye-epm5";
+		};
+	};
+};

arch/mips/mobileye/vmlinux.its.S

+/* SPDX-License-Identifier: GPL-2.0 */
+/dts-v1/;
+
+/ {
+	description = KERNEL_NAME;
+	#address-cells = <ADDR_CELLS>;
+
+	images {
+		kernel {
+			description = KERNEL_NAME;
+			data = /incbin/(VMLINUX_BINARY);
+			type = "kernel";
+			arch = "mips";
+			os = "linux";
+			compression = VMLINUX_COMPRESSION;
+			load = /bits/ ADDR_BITS <VMLINUX_LOAD_ADDRESS>;
+			entry = /bits/ ADDR_BITS <VMLINUX_ENTRY_ADDRESS>;
+			hash {
+				algo = "sha1";
+			};
+		};
+	};
+
+	configurations {
+		default = "conf-default";
+
+		conf-default {
+			description = "Generic Linux kernel";
+			kernel = "kernel";
+		};
+	};
+};

arch/mips/pci/fixup-ath79.c

@@ -9,7 +9,7 @@
 
 int pcibios_plat_dev_init(struct pci_dev *dev)
 {
-	return PCIBIOS_SUCCESSFUL;
+	return 0;
 }
 
 int pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)

arch/mips/pci/fixup-lantiq.c

@@ -7,17 +7,8 @@
 #include <linux/of_pci.h>
 #include <linux/pci.h>
 
-int (*ltq_pci_plat_arch_init)(struct pci_dev *dev) = NULL;
-int (*ltq_pci_plat_dev_init)(struct pci_dev *dev) = NULL;
-
 int pcibios_plat_dev_init(struct pci_dev *dev)
 {
-	if (ltq_pci_plat_arch_init)
-		return ltq_pci_plat_arch_init(dev);
-
-	if (ltq_pci_plat_dev_init)
-		return ltq_pci_plat_dev_init(dev);
-
 	return 0;
 }
 

arch/mips/pci/ops-tx4927.c

@@ -60,7 +60,7 @@ static int mkaddr(struct pci_bus *bus, unsigned int devfn, int where,
 {
 	if (bus->parent == NULL &&
 	    devfn >= PCI_DEVFN(TX4927_PCIC_MAX_DEVNU, 0))
-		return -1;
+		return PCIBIOS_DEVICE_NOT_FOUND;
 	__raw_writel(((bus->number & 0xff) << 0x10)
 		     | ((devfn & 0xff) << 0x08) | (where & 0xfc)
 		     | (bus->parent ? 1 : 0),
@@ -69,7 +69,7 @@ static int mkaddr(struct pci_bus *bus, unsigned int devfn, int where,
 	__raw_writel((__raw_readl(&pcicptr->pcistatus) & 0x0000ffff)
 		     | (PCI_STATUS_REC_MASTER_ABORT << 16),
 		     &pcicptr->pcistatus);
-	return 0;
+	return PCIBIOS_SUCCESSFUL;
 }
 
 static int check_abort(struct tx4927_pcic_reg __iomem *pcicptr)
@@ -140,10 +140,12 @@ static int tx4927_pci_config_read(struct pci_bus *bus, unsigned int devfn,
 				  int where, int size, u32 *val)
 {
 	struct tx4927_pcic_reg __iomem *pcicptr = pci_bus_to_pcicptr(bus);
+	int ret;
 
-	if (mkaddr(bus, devfn, where, pcicptr)) {
-		*val = 0xffffffff;
-		return -1;
+	ret = mkaddr(bus, devfn, where, pcicptr);
+	if (ret != PCIBIOS_SUCCESSFUL) {
+		PCI_SET_ERROR_RESPONSE(val);
+		return ret;
 	}
 	switch (size) {
 	case 1:
@@ -162,9 +164,11 @@ static int tx4927_pci_config_write(struct pci_bus *bus, unsigned int devfn,
 				   int where, int size, u32 val)
 {
 	struct tx4927_pcic_reg __iomem *pcicptr = pci_bus_to_pcicptr(bus);
+	int ret;
 
-	if (mkaddr(bus, devfn, where, pcicptr))
-		return -1;
+	ret = mkaddr(bus, devfn, where, pcicptr);
+	if (ret != PCIBIOS_SUCCESSFUL)
+		return ret;
 	switch (size) {
 	case 1:
 		icd_writeb(val, where & 3, pcicptr);

arch/mips/ralink/timer.c

@@ -6,11 +6,16 @@
  * Copyright (C) 2013 John Crispin <john@phrozen.org>
 */
 
-#include <linux/platform_device.h>
+#include <linux/bits.h>
+#include <linux/clk.h>
+#include <linux/device.h>
+#include <linux/err.h>
 #include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/mod_devicetable.h>
+#include <linux/platform_device.h>
 #include <linux/timer.h>
-#include <linux/of_gpio.h>
-#include <linux/clk.h>
+#include <linux/types.h>
 
 #include <asm/mach-ralink/ralink_regs.h>
 

arch/mips/sgi-ip22/ip22-gio.c

@@ -12,7 +12,7 @@
 #include <asm/sgi/mc.h>
 #include <asm/sgi/ip22.h>
 
-static struct bus_type gio_bus_type;
+static const struct bus_type gio_bus_type;
 
 static struct {
 	const char *name;
@@ -378,7 +378,7 @@ static void ip22_check_gio(int slotno, unsigned long addr, int irq)
 		printk(KERN_INFO "GIO: slot %d : Empty\n", slotno);
 }
 
-static struct bus_type gio_bus_type = {
+static const struct bus_type gio_bus_type = {
 	.name	   = "gio",
 	.dev_groups = gio_dev_groups,
 	.match	   = gio_bus_match,

arch/mips/sibyte/common/sb_tbprof.c

@@ -535,13 +535,14 @@ static const struct file_operations sbprof_tb_fops = {
 	.llseek		= default_llseek,
 };
 
-static struct class *tb_class;
+static const struct class tb_class = {
+	.name = "sb_tracebuffer",
+};
 static struct device *tb_dev;
 
 static int __init sbprof_tb_init(void)
 {
 	struct device *dev;
-	struct class *tbc;
 	int err;
 
 	if (register_chrdev(SBPROF_TB_MAJOR, DEVNAME, &sbprof_tb_fops)) {
@@ -550,15 +551,11 @@ static int __init sbprof_tb_init(void)
 		return -EIO;
 	}
 
-	tbc = class_create("sb_tracebuffer");
-	if (IS_ERR(tbc)) {
-		err = PTR_ERR(tbc);
+	err = class_register(&tb_class);
+	if (err)
 		goto out_chrdev;
-	}
-
-	tb_class = tbc;
 
-	dev = device_create(tbc, NULL, MKDEV(SBPROF_TB_MAJOR, 0), NULL, "tb");
+	dev = device_create(&tb_class, NULL, MKDEV(SBPROF_TB_MAJOR, 0), NULL, "tb");
 	if (IS_ERR(dev)) {
 		err = PTR_ERR(dev);
 		goto out_class;
@@ -573,7 +570,7 @@ static int __init sbprof_tb_init(void)
 	return 0;
 
 out_class:
-	class_destroy(tb_class);
+	class_unregister(&tb_class);
 out_chrdev:
 	unregister_chrdev(SBPROF_TB_MAJOR, DEVNAME);
 
@@ -582,9 +579,9 @@ static int __init sbprof_tb_init(void)
 
 static void __exit sbprof_tb_cleanup(void)
 {
-	device_destroy(tb_class, MKDEV(SBPROF_TB_MAJOR, 0));
+	device_destroy(&tb_class, MKDEV(SBPROF_TB_MAJOR, 0));
 	unregister_chrdev(SBPROF_TB_MAJOR, DEVNAME);
-	class_destroy(tb_class);
+	class_unregister(&tb_class);
 }
 
 module_init(sbprof_tb_init);

arch/mips/txx9/generic/setup.c

@@ -762,7 +762,7 @@ void __init txx9_aclc_init(unsigned long baseaddr, int irq,
 {
 }
 
-static struct bus_type txx9_sramc_subsys = {
+static const struct bus_type txx9_sramc_subsys = {
 	.name = "txx9_sram",
 	.dev_name = "txx9_sram",
 };

drivers/bus/bt1-apb.c

@@ -22,7 +22,6 @@
 #include <linux/clk.h>
 #include <linux/reset.h>
 #include <linux/time64.h>
-#include <linux/clk.h>
 #include <linux/sysfs.h>
 
 #define APB_EHB_ISR			0x00

drivers/bus/mips_cdmm.c

@@ -118,7 +118,7 @@ static struct attribute *mips_cdmm_dev_attrs[] = {
 };
 ATTRIBUTE_GROUPS(mips_cdmm_dev);
 
-struct bus_type mips_cdmm_bustype = {
+const struct bus_type mips_cdmm_bustype = {
 	.name		= "cdmm",
 	.dev_groups	= mips_cdmm_dev_groups,
 	.match		= mips_cdmm_match,

drivers/tc/tc-driver.c

@@ -95,7 +95,7 @@ static int tc_bus_match(struct device *dev, struct device_driver *drv)
 	return 0;
 }
 
-struct bus_type tc_bus_type = {
+const struct bus_type tc_bus_type = {
 	.name	= "tc",
 	.match	= tc_bus_match,
 };

drivers/tty/mips_ejtag_fdc.c

@@ -309,7 +309,7 @@ static void mips_ejtag_fdc_console_write(struct console *c, const char *s,
 	unsigned int i, buf_len, cpu;
 	bool done_cr = false;
 	char buf[4];
-	const char *buf_ptr = buf;
+	const u8 *buf_ptr = buf;
 	/* Number of bytes of input data encoded up to each byte in buf */
 	u8 inc[4];
 

include/linux/tc.h

@@ -120,7 +120,7 @@ static inline unsigned long tc_get_speed(struct tc_bus *tbus)
 
 #ifdef CONFIG_TC
 
-extern struct bus_type tc_bus_type;
+extern const struct bus_type tc_bus_type;
 
 extern int tc_register_driver(struct tc_driver *tdrv);
 extern void tc_unregister_driver(struct tc_driver *tdrv);