Merge branch 'drm-misc-fixes' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes

(I've pulled from a non-tag to get the ttm regression fix)
drm-misc-fixes-2021-02-10:
 * dp_mst: Don't report un-attached ports as connected
 * sun4i: tcon1 sync polarity fix; Always set HDMI clock rate; Fix
          H6 HDMI PHY config; Fix H6 max frequency
 * vc4: Fix buffer overflow
 * xlnx: Fix memory leak
 * ttm: page pool regression fix.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/YCPo6g3gDxD3P//h@linux-uq9g

drivers/gpu/drm/drm_dp_mst_topology.c

@@ -4224,6 +4224,7 @@ drm_dp_mst_detect_port(struct drm_connector *connector,
 
 	switch (port->pdt) {
 	case DP_PEER_DEVICE_NONE:
+		break;
 	case DP_PEER_DEVICE_MST_BRANCHING:
 		if (!port->mcs)
 			ret = connector_status_connected;

drivers/gpu/drm/sun4i/sun4i_tcon.c

@@ -689,6 +689,30 @@ static void sun4i_tcon1_mode_set(struct sun4i_tcon *tcon,
 		     SUN4I_TCON1_BASIC5_V_SYNC(vsync) |
 		     SUN4I_TCON1_BASIC5_H_SYNC(hsync));
 
+	/* Setup the polarity of multiple signals */
+	if (tcon->quirks->polarity_in_ch0) {
+		val = 0;
+
+		if (mode->flags & DRM_MODE_FLAG_PHSYNC)
+			val |= SUN4I_TCON0_IO_POL_HSYNC_POSITIVE;
+
+		if (mode->flags & DRM_MODE_FLAG_PVSYNC)
+			val |= SUN4I_TCON0_IO_POL_VSYNC_POSITIVE;
+
+		regmap_write(tcon->regs, SUN4I_TCON0_IO_POL_REG, val);
+	} else {
+		/* according to vendor driver, this bit must be always set */
+		val = SUN4I_TCON1_IO_POL_UNKNOWN;
+
+		if (mode->flags & DRM_MODE_FLAG_PHSYNC)
+			val |= SUN4I_TCON1_IO_POL_HSYNC_POSITIVE;
+
+		if (mode->flags & DRM_MODE_FLAG_PVSYNC)
+			val |= SUN4I_TCON1_IO_POL_VSYNC_POSITIVE;
+
+		regmap_write(tcon->regs, SUN4I_TCON1_IO_POL_REG, val);
+	}
+
 	/* Map output pins to channel 1 */
 	regmap_update_bits(tcon->regs, SUN4I_TCON_GCTL_REG,
 			   SUN4I_TCON_GCTL_IOMAP_MASK,
@@ -1517,6 +1541,7 @@ static const struct sun4i_tcon_quirks sun8i_a83t_tv_quirks = {
 
 static const struct sun4i_tcon_quirks sun8i_r40_tv_quirks = {
 	.has_channel_1		= true,
+	.polarity_in_ch0	= true,
 	.set_mux		= sun8i_r40_tcon_tv_set_mux,
 };
 

drivers/gpu/drm/sun4i/sun4i_tcon.h

@@ -153,6 +153,11 @@
 #define SUN4I_TCON1_BASIC5_V_SYNC(height)		(((height) - 1) & 0x3ff)
 
 #define SUN4I_TCON1_IO_POL_REG			0xf0
+/* there is no documentation about this bit */
+#define SUN4I_TCON1_IO_POL_UNKNOWN			BIT(26)
+#define SUN4I_TCON1_IO_POL_HSYNC_POSITIVE		BIT(25)
+#define SUN4I_TCON1_IO_POL_VSYNC_POSITIVE		BIT(24)
+
 #define SUN4I_TCON1_IO_TRI_REG			0xf4
 
 #define SUN4I_TCON_ECC_FIFO_REG			0xf8
@@ -235,6 +240,7 @@ struct sun4i_tcon_quirks {
 	bool	needs_de_be_mux; /* sun6i needs mux to select backend */
 	bool    needs_edp_reset; /* a80 edp reset needed for tcon0 access */
 	bool	supports_lvds;   /* Does the TCON support an LVDS output? */
+	bool	polarity_in_ch0; /* some tcon1 channels have polarity bits in tcon0 pol register */
 	u8	dclk_min_div;	/* minimum divider for TCON0 DCLK */
 
 	/* callback to handle tcon muxing options */

drivers/gpu/drm/sun4i/sun8i_dw_hdmi.c

@@ -21,7 +21,6 @@ static void sun8i_dw_hdmi_encoder_mode_set(struct drm_encoder *encoder,
 {
 	struct sun8i_dw_hdmi *hdmi = encoder_to_sun8i_dw_hdmi(encoder);
 
-	if (hdmi->quirks->set_rate)
 	clk_set_rate(hdmi->clk_tmds, mode->crtc_clock * 1000);
 }
 
@@ -48,11 +47,9 @@ sun8i_dw_hdmi_mode_valid_h6(struct dw_hdmi *hdmi, void *data,
 {
 	/*
 	 * Controller support maximum of 594 MHz, which correlates to
-	 * 4K@60Hz 4:4:4 or RGB. However, for frequencies greater than
-	 * 340 MHz scrambling has to be enabled. Because scrambling is
-	 * not yet implemented, just limit to 340 MHz for now.
+	 * 4K@60Hz 4:4:4 or RGB.
 	 */
-	if (mode->clock > 340000)
+	if (mode->clock > 594000)
 		return MODE_CLOCK_HIGH;
 
 	return MODE_OK;
@@ -295,7 +292,6 @@ static int sun8i_dw_hdmi_remove(struct platform_device *pdev)
 
 static const struct sun8i_dw_hdmi_quirks sun8i_a83t_quirks = {
 	.mode_valid = sun8i_dw_hdmi_mode_valid_a83t,
-	.set_rate = true,
 };
 
 static const struct sun8i_dw_hdmi_quirks sun50i_h6_quirks = {

drivers/gpu/drm/sun4i/sun8i_dw_hdmi.h

@@ -179,7 +179,6 @@ struct sun8i_dw_hdmi_quirks {
 	enum drm_mode_status (*mode_valid)(struct dw_hdmi *hdmi, void *data,
 					   const struct drm_display_info *info,
 					   const struct drm_display_mode *mode);
-	unsigned int set_rate : 1;
 	unsigned int use_drm_infoframe : 1;
 };
 

drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c

@@ -104,29 +104,21 @@ static const struct dw_hdmi_mpll_config sun50i_h6_mpll_cfg[] = {
 
 static const struct dw_hdmi_curr_ctrl sun50i_h6_cur_ctr[] = {
 	/* pixelclk    bpp8    bpp10   bpp12 */
-	{ 25175000,  { 0x0000, 0x0000, 0x0000 }, },
 	{ 27000000,  { 0x0012, 0x0000, 0x0000 }, },
-	{ 59400000,  { 0x0008, 0x0008, 0x0008 }, },
-	{ 72000000,  { 0x0008, 0x0008, 0x001b }, },
-	{ 74250000,  { 0x0013, 0x0013, 0x0013 }, },
-	{ 90000000,  { 0x0008, 0x001a, 0x001b }, },
-	{ 118800000, { 0x001b, 0x001a, 0x001b }, },
-	{ 144000000, { 0x001b, 0x001a, 0x0034 }, },
-	{ 180000000, { 0x001b, 0x0033, 0x0034 }, },
-	{ 216000000, { 0x0036, 0x0033, 0x0034 }, },
-	{ 237600000, { 0x0036, 0x0033, 0x001b }, },
-	{ 288000000, { 0x0036, 0x001b, 0x001b }, },
-	{ 297000000, { 0x0019, 0x001b, 0x0019 }, },
-	{ 330000000, { 0x0036, 0x001b, 0x001b }, },
-	{ 594000000, { 0x003f, 0x001b, 0x001b }, },
+	{ 74250000,  { 0x0013, 0x001a, 0x001b }, },
+	{ 148500000, { 0x0019, 0x0033, 0x0034 }, },
+	{ 297000000, { 0x0019, 0x001b, 0x001b }, },
+	{ 594000000, { 0x0010, 0x001b, 0x001b }, },
 	{ ~0UL,      { 0x0000, 0x0000, 0x0000 }, }
 };
 
 static const struct dw_hdmi_phy_config sun50i_h6_phy_config[] = {
 	/*pixelclk   symbol   term   vlev*/
-	{ 74250000,  0x8009, 0x0004, 0x0232},
-	{ 148500000, 0x8029, 0x0004, 0x0273},
-	{ 594000000, 0x8039, 0x0004, 0x014a},
+	{ 27000000,  0x8009, 0x0007, 0x02b0 },
+	{ 74250000,  0x8009, 0x0006, 0x022d },
+	{ 148500000, 0x8029, 0x0006, 0x0270 },
+	{ 297000000, 0x8039, 0x0005, 0x01ab },
+	{ 594000000, 0x8029, 0x0000, 0x008a },
 	{ ~0UL,	     0x0000, 0x0000, 0x0000}
 };
 

drivers/gpu/drm/ttm/ttm_pool.c

@@ -33,6 +33,7 @@
 
 #include <linux/module.h>
 #include <linux/dma-mapping.h>
+#include <linux/highmem.h>
 
 #ifdef CONFIG_X86
 #include <asm/set_memory.h>
@@ -218,6 +219,15 @@ static void ttm_pool_unmap(struct ttm_pool *pool, dma_addr_t dma_addr,
 /* Give pages into a specific pool_type */
 static void ttm_pool_type_give(struct ttm_pool_type *pt, struct page *p)
 {
+	unsigned int i, num_pages = 1 << pt->order;
+
+	for (i = 0; i < num_pages; ++i) {
+		if (PageHighMem(p))
+			clear_highpage(p + i);
+		else
+			clear_page(page_address(p + i));
+	}
+
 	spin_lock(&pt->lock);
 	list_add(&p->lru, &pt->pages);
 	spin_unlock(&pt->lock);

drivers/gpu/drm/vc4/vc4_plane.c

@@ -220,7 +220,7 @@ static void vc4_plane_reset(struct drm_plane *plane)
 	__drm_atomic_helper_plane_reset(plane, &vc4_state->base);
 }
 
-static void vc4_dlist_write(struct vc4_plane_state *vc4_state, u32 val)
+static void vc4_dlist_counter_increment(struct vc4_plane_state *vc4_state)
 {
 	if (vc4_state->dlist_count == vc4_state->dlist_size) {
 		u32 new_size = max(4u, vc4_state->dlist_count * 2);
@@ -235,7 +235,15 @@ static void vc4_dlist_write(struct vc4_plane_state *vc4_state, u32 val)
 		vc4_state->dlist_size = new_size;
 	}
 
-	vc4_state->dlist[vc4_state->dlist_count++] = val;
+	vc4_state->dlist_count++;
+}
+
+static void vc4_dlist_write(struct vc4_plane_state *vc4_state, u32 val)
+{
+	unsigned int idx = vc4_state->dlist_count;
+
+	vc4_dlist_counter_increment(vc4_state);
+	vc4_state->dlist[idx] = val;
 }
 
 /* Returns the scl0/scl1 field based on whether the dimensions need to
@@ -978,8 +986,10 @@ static int vc4_plane_mode_set(struct drm_plane *plane,
 		 * be set when calling vc4_plane_allocate_lbm().
 		 */
 		if (vc4_state->y_scaling[0] != VC4_SCALING_NONE ||
-		    vc4_state->y_scaling[1] != VC4_SCALING_NONE)
-			vc4_state->lbm_offset = vc4_state->dlist_count++;
+		    vc4_state->y_scaling[1] != VC4_SCALING_NONE) {
+			vc4_state->lbm_offset = vc4_state->dlist_count;
+			vc4_dlist_counter_increment(vc4_state);
+		}
 
 		if (num_planes > 1) {
 			/* Emit Cb/Cr as channel 0 and Y as channel

drivers/gpu/drm/xlnx/zynqmp_disp.c

@@ -1396,19 +1396,11 @@ static void zynqmp_disp_enable(struct zynqmp_disp *disp)
  */
 static void zynqmp_disp_disable(struct zynqmp_disp *disp)
 {
-	struct drm_crtc *crtc = &disp->crtc;
-
 	zynqmp_disp_audio_disable(&disp->audio);
 
 	zynqmp_disp_avbuf_disable_audio(&disp->avbuf);
 	zynqmp_disp_avbuf_disable_channels(&disp->avbuf);
 	zynqmp_disp_avbuf_disable(&disp->avbuf);
-
-	/* Mark the flip is done as crtc is disabled anyway */
-	if (crtc->state->event) {
-		complete_all(crtc->state->event->base.completion);
-		crtc->state->event = NULL;
-	}
 }
 
 static inline struct zynqmp_disp *crtc_to_disp(struct drm_crtc *crtc)
@@ -1499,6 +1491,13 @@ zynqmp_disp_crtc_atomic_disable(struct drm_crtc *crtc,
 
 	drm_crtc_vblank_off(&disp->crtc);
 
+	spin_lock_irq(&crtc->dev->event_lock);
+	if (crtc->state->event) {
+		drm_crtc_send_vblank_event(crtc, crtc->state->event);
+		crtc->state->event = NULL;
+	}
+	spin_unlock_irq(&crtc->dev->event_lock);
+
 	clk_disable_unprepare(disp->pclk);
 	pm_runtime_put_sync(disp->dev);
 }