fsi: master-gpio: Remove "GPIO" prefix on some definitions

Some definitions are generic to the FSI protocol or any
give master implementation. Rename them to remove the
"GPIO" prefix in preparation for moving them to a common
header.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Reviewed-by: Joel Stanley <joel@jms.id.au>

# Conflicts:
#	drivers/fsi/fsi-master-gpio.c

drivers/fsi/fsi-master-gpio.c

@@ -23,26 +23,28 @@
 #define	FSI_BREAK_CLOCKS	256	/* Number of clocks to issue break */
 #define	FSI_POST_BREAK_CLOCKS	16000	/* Number clocks to set up cfam */
 #define	FSI_INIT_CLOCKS		5000	/* Clock out any old data */
-#define	FSI_GPIO_DPOLL_CLOCKS	50      /* < 21 will cause slave to hang */
-#define	FSI_GPIO_EPOLL_CLOCKS	50      /* Number of clocks for E_POLL retry */
+#define	FSI_MASTER_DPOLL_CLOCKS	50      /* < 21 will cause slave to hang */
+#define	FSI_MASTER_EPOLL_CLOCKS	50      /* Number of clocks for E_POLL retry */
+
 #define FSI_CRC_ERR_RETRIES	10
 
-#define	FSI_GPIO_CMD_DPOLL      0x2
-#define	FSI_GPIO_CMD_EPOLL      0x3
-#define	FSI_GPIO_CMD_TERM	0x3f
-#define FSI_GPIO_CMD_ABS_AR	0x4
-#define FSI_GPIO_CMD_REL_AR	0x5
-#define FSI_GPIO_CMD_SAME_AR	0x3	/* but only a 2-bit opcode... */
+#define	FSI_CMD_DPOLL		0x2
+#define	FSI_CMD_EPOLL		0x3
+#define	FSI_CMD_TERM		0x3f
+#define FSI_CMD_ABS_AR		0x4
+#define FSI_CMD_REL_AR		0x5
+#define FSI_CMD_SAME_AR		0x3	/* but only a 2-bit opcode... */
 
 /* Slave responses */
-#define	FSI_GPIO_RESP_ACK	0	/* Success */
-#define	FSI_GPIO_RESP_BUSY	1	/* Slave busy */
-#define	FSI_GPIO_RESP_ERRA	2	/* Any (misc) Error */
-#define	FSI_GPIO_RESP_ERRC	3	/* Slave reports master CRC error */
+#define	FSI_RESP_ACK		0	/* Success */
+#define	FSI_RESP_BUSY		1	/* Slave busy */
+#define	FSI_RESP_ERRA		2	/* Any (misc) Error */
+#define	FSI_RESP_ERRC		3	/* Slave reports master CRC error */
+
+#define	FSI_MASTER_MAX_BUSY	200
 
-#define	FSI_GPIO_MAX_BUSY	200
-#define	FSI_GPIO_MTOE_COUNT	1000
-#define	FSI_GPIO_CRC_SIZE	4
+#define	FSI_MASTER_MTOE_COUNT	1000
+#define	FSI_CRC_SIZE		4
 
 #define LAST_ADDR_INVALID		0x1
 
@@ -279,19 +281,19 @@ static void build_ar_command(struct fsi_master_gpio *master,
 		/* we still address the byte offset within the word */
 		addr_bits = 2;
 		opcode_bits = 2;
-		opcode = FSI_GPIO_CMD_SAME_AR;
+		opcode = FSI_CMD_SAME_AR;
 		trace_fsi_master_gpio_cmd_same_addr(master);
 
 	} else if (check_relative_address(master, id, addr, &rel_addr)) {
 		/* 8 bits plus sign */
 		addr_bits = 9;
 		addr = rel_addr;
-		opcode = FSI_GPIO_CMD_REL_AR;
+		opcode = FSI_CMD_REL_AR;
 		trace_fsi_master_gpio_cmd_rel_addr(master, rel_addr);
 
 	} else {
 		addr_bits = 21;
-		opcode = FSI_GPIO_CMD_ABS_AR;
+		opcode = FSI_CMD_ABS_AR;
 		trace_fsi_master_gpio_cmd_abs_addr(master, addr);
 	}
 
@@ -327,7 +329,7 @@ static void build_dpoll_command(struct fsi_gpio_msg *cmd, uint8_t slave_id)
 	cmd->msg = 0;
 
 	msg_push_bits(cmd, slave_id, 2);
-	msg_push_bits(cmd, FSI_GPIO_CMD_DPOLL, 3);
+	msg_push_bits(cmd, FSI_CMD_DPOLL, 3);
 	msg_push_crc(cmd);
 }
 
@@ -337,7 +339,7 @@ static void build_epoll_command(struct fsi_gpio_msg *cmd, uint8_t slave_id)
 	cmd->msg = 0;
 
 	msg_push_bits(cmd, slave_id, 2);
-	msg_push_bits(cmd, FSI_GPIO_CMD_EPOLL, 3);
+	msg_push_bits(cmd, FSI_CMD_EPOLL, 3);
 	msg_push_crc(cmd);
 }
 
@@ -347,7 +349,7 @@ static void build_term_command(struct fsi_gpio_msg *cmd, uint8_t slave_id)
 	cmd->msg = 0;
 
 	msg_push_bits(cmd, slave_id, 2);
-	msg_push_bits(cmd, FSI_GPIO_CMD_TERM, 6);
+	msg_push_bits(cmd, FSI_CMD_TERM, 6);
 	msg_push_crc(cmd);
 }
 
@@ -369,14 +371,14 @@ static int read_one_response(struct fsi_master_gpio *master,
 	local_irq_save(flags);
 
 	/* wait for the start bit */
-	for (i = 0; i < FSI_GPIO_MTOE_COUNT; i++) {
+	for (i = 0; i < FSI_MASTER_MTOE_COUNT; i++) {
 		msg.bits = 0;
 		msg.msg = 0;
 		serial_in(master, &msg, 1);
 		if (msg.msg)
 			break;
 	}
-	if (i == FSI_GPIO_MTOE_COUNT) {
+	if (i == FSI_MASTER_MTOE_COUNT) {
 		dev_dbg(master->dev,
 			"Master time out waiting for response\n");
 		local_irq_restore(flags);
@@ -392,11 +394,11 @@ static int read_one_response(struct fsi_master_gpio *master,
 	tag = msg.msg & 0x3;
 
 	/* If we have an ACK and we're expecting data, clock the data in too */
-	if (tag == FSI_GPIO_RESP_ACK && data_size)
+	if (tag == FSI_RESP_ACK && data_size)
 		serial_in(master, &msg, data_size * 8);
 
 	/* read CRC */
-	serial_in(master, &msg, FSI_GPIO_CRC_SIZE);
+	serial_in(master, &msg, FSI_CRC_SIZE);
 
 	local_irq_restore(flags);
 
@@ -439,7 +441,7 @@ static int issue_term(struct fsi_master_gpio *master, uint8_t slave)
 		dev_err(master->dev,
 				"TERM failed; lost communication with slave\n");
 		return -EIO;
-	} else if (tag != FSI_GPIO_RESP_ACK) {
+	} else if (tag != FSI_RESP_ACK) {
 		dev_err(master->dev, "TERM failed; response %d\n", tag);
 		return -EIO;
 	}
@@ -475,7 +477,7 @@ static int poll_for_response(struct fsi_master_gpio *master,
 		trace_fsi_master_gpio_crc_rsp_error(master);
 		build_epoll_command(&cmd, slave);
 		local_irq_save(flags);
-		clock_zeros(master, FSI_GPIO_EPOLL_CLOCKS);
+		clock_zeros(master, FSI_MASTER_EPOLL_CLOCKS);
 		serial_out(master, &cmd);
 		echo_delay(master);
 		local_irq_restore(flags);
@@ -484,7 +486,7 @@ static int poll_for_response(struct fsi_master_gpio *master,
 		goto fail;
 
 	switch (tag) {
-	case FSI_GPIO_RESP_ACK:
+	case FSI_RESP_ACK:
 		if (size && data) {
 			uint64_t val = response.msg;
 			/* clear crc & mask */
@@ -497,16 +499,16 @@ static int poll_for_response(struct fsi_master_gpio *master,
 			}
 		}
 		break;
-	case FSI_GPIO_RESP_BUSY:
+	case FSI_RESP_BUSY:
 		/*
 		 * Its necessary to clock slave before issuing
 		 * d-poll, not indicated in the hardware protocol
 		 * spec. < 20 clocks causes slave to hang, 21 ok.
 		 */
-		if (busy_count++ < FSI_GPIO_MAX_BUSY) {
+		if (busy_count++ < FSI_MASTER_MAX_BUSY) {
 			build_dpoll_command(&cmd, slave);
 			local_irq_save(flags);
-			clock_zeros(master, FSI_GPIO_DPOLL_CLOCKS);
+			clock_zeros(master, FSI_MASTER_DPOLL_CLOCKS);
 			serial_out(master, &cmd);
 			echo_delay(master);
 			local_irq_restore(flags);
@@ -515,17 +517,17 @@ static int poll_for_response(struct fsi_master_gpio *master,
 		dev_warn(master->dev,
 			"ERR slave is stuck in busy state, issuing TERM\n");
 		local_irq_save(flags);
-		clock_zeros(master, FSI_GPIO_DPOLL_CLOCKS);
+		clock_zeros(master, FSI_MASTER_DPOLL_CLOCKS);
 		local_irq_restore(flags);
 		issue_term(master, slave);
 		rc = -EIO;
 		break;
 
-	case FSI_GPIO_RESP_ERRA:
+	case FSI_RESP_ERRA:
 		dev_dbg(master->dev, "ERRA received: 0x%x\n", (int)response.msg);
 		rc = -EIO;
 		break;
-	case FSI_GPIO_RESP_ERRC:
+	case FSI_RESP_ERRC:
 		dev_dbg(master->dev, "ERRC received: 0x%x\n", (int)response.msg);
 		trace_fsi_master_gpio_crc_cmd_error(master);
 		rc = -EAGAIN;