arm64: dts: zynqmp: Wire up the DisplayPort subsystem

Enable the dpsub device and wire it up to the PS-GTR PHY lanes routed to
the DisplayPort connector.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Link: https://lore.kernel.org/r/9769d4d103b6eb75e3324825117f6832a746004e.1611232558.git.michal.simek@xilinx.com

arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts

@@ -15,6 +15,7 @@
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/phy/phy.h>
 
 / {
 	model = "ZynqMP ZCU100 RevC";
@@ -108,6 +109,18 @@ ina226 {
 		compatible = "iio-hwmon";
 		io-channels = <&u35 0>, <&u35 1>, <&u35 2>, <&u35 3>;
 	};
+
+	si5335a_0: clk26 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <26000000>;
+	};
+
+	si5335a_1: clk27 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <27000000>;
+	};
 };
 
 &dcc {
@@ -224,6 +237,13 @@ i2csw_7: i2c@7 {
 	};
 };
 
+&psgtr {
+	status = "okay";
+	/* usb3, dps */
+	clocks = <&si5335a_0>, <&si5335a_1>;
+	clock-names = "ref0", "ref1";
+};
+
 &rtc {
 	status = "okay";
 };
@@ -295,3 +315,14 @@ &usb1 {
 &watchdog0 {
 	status = "okay";
 };
+
+&zynqmp_dpdma {
+	status = "okay";
+};
+
+&zynqmp_dpsub {
+	status = "okay";
+	phy-names = "dp-phy0", "dp-phy1";
+	phys = <&psgtr 1 PHY_TYPE_DP 0 1>,
+	       <&psgtr 0 PHY_TYPE_DP 1 1>;
+};

arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts

@@ -714,3 +714,13 @@ &usb0 {
 &watchdog0 {
 	status = "okay";
 };
+
+&zynqmp_dpdma {
+	status = "okay";
+};
+
+&zynqmp_dpsub {
+	status = "okay";
+	phy-names = "dp-phy0";
+	phys = <&psgtr 1 PHY_TYPE_DP 0 3>;
+};

arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revA.dts

@@ -224,3 +224,14 @@ &usb0 {
 &watchdog0 {
 	status = "okay";
 };
+
+&zynqmp_dpdma {
+	status = "okay";
+};
+
+&zynqmp_dpsub {
+	status = "okay";
+	phy-names = "dp-phy0", "dp-phy1";
+	phys = <&psgtr 1 PHY_TYPE_DP 0 3>,
+	       <&psgtr 0 PHY_TYPE_DP 1 3>;
+};

arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revC.dts

@@ -280,3 +280,14 @@ &usb0 {
 &watchdog0 {
 	status = "okay";
 };
+
+&zynqmp_dpdma {
+	status = "okay";
+};
+
+&zynqmp_dpsub {
+	status = "okay";
+	phy-names = "dp-phy0", "dp-phy1";
+	phys = <&psgtr 1 PHY_TYPE_DP 0 3>,
+	       <&psgtr 0 PHY_TYPE_DP 1 3>;
+};

arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts

@@ -156,6 +156,17 @@ &dcc {
 	status = "okay";
 };
 
+&zynqmp_dpdma {
+	status = "okay";
+};
+
+&zynqmp_dpsub {
+	status = "okay";
+	phy-names = "dp-phy0", "dp-phy1";
+	phys = <&psgtr 1 PHY_TYPE_DP 0 3>,
+	       <&psgtr 0 PHY_TYPE_DP 1 3>;
+};
+
 /* fpd_dma clk 667MHz, lpd_dma 500MHz */
 &fpd_dma_chan1 {
 	status = "okay";

arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts

@@ -584,3 +584,14 @@ &usb0 {
 	status = "okay";
 	dr_mode = "host";
 };
+
+&zynqmp_dpdma {
+	status = "okay";
+};
+
+&zynqmp_dpsub {
+	status = "okay";
+	phy-names = "dp-phy0", "dp-phy1";
+	phys = <&psgtr 1 PHY_TYPE_DP 0 1>,
+	       <&psgtr 0 PHY_TYPE_DP 1 1>;
+};