drivers/perf: imx_ddr: Add support for NXP i.MX9 SoC DDRC PMU driver

Add ddr performance monitor support for i.MX93.

There are 11 counters for ddr performance events.
- Counter 0 is a 64-bit counter that counts only clock cycles.
- Counter 1-10 are 32-bit counters that can monitor counter-specific
  events in addition to counting reference events.

For example:
  perf stat -a -e imx9_ddr0/ddrc_pm_1,counter=1/,imx9_ddr0/ddrc_pm_2,counter=2/ ls

Besides, this ddr pmu support AXI filter capability. It's implemented as
counter-specific events. It now supports read transaction, write transaction
and read beat events which corresponding respecitively to counter 2, 3 and 4.
axi_mask and axi_id need to be as event parameters.

For example:
  perf stat -a -I 1000 -e imx9_ddr0/eddrtq_pm_rd_trans_filt,counter=2,axi_mask=ID_MASK,axi_id=ID/
  perf stat -a -I 1000 -e imx9_ddr0/eddrtq_pm_wr_trans_filt,counter=3,axi_mask=ID_MASK,axi_id=ID/
  perf stat -a -I 1000 -e imx9_ddr0/eddrtq_pm_rd_beat_filt,counter=4,axi_mask=ID_MASK,axi_id=ID/
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20230418102910.2065651-1-xu.yang_2@nxp.com
[will: Remove redundant error message on platform_get_irq() failure]
Signed-off-by: Will Deacon <will@kernel.org>

drivers/perf/Kconfig

@@ -127,6 +127,14 @@ config FSL_IMX8_DDR_PMU
 	  can give information about memory throughput and other related
 	  events.
 
+config FSL_IMX9_DDR_PMU
+	tristate "Freescale i.MX9 DDR perf monitor"
+	depends on ARCH_MXC
+	 help
+	 Provides support for the DDR performance monitor in i.MX9, which
+	 can give information about memory throughput and other related
+	 events.
+
 config QCOM_L2_PMU
 	bool "Qualcomm Technologies L2-cache PMU"
 	depends on ARCH_QCOM && ARM64 && ACPI

drivers/perf/Makefile

@@ -8,6 +8,7 @@ obj-$(CONFIG_ARM_PMU_ACPI) += arm_pmu_acpi.o
 obj-$(CONFIG_ARM_PMUV3) += arm_pmuv3.o
 obj-$(CONFIG_ARM_SMMU_V3_PMU) += arm_smmuv3_pmu.o
 obj-$(CONFIG_FSL_IMX8_DDR_PMU) += fsl_imx8_ddr_perf.o
+obj-$(CONFIG_FSL_IMX9_DDR_PMU) += fsl_imx9_ddr_perf.o
 obj-$(CONFIG_HISI_PMU) += hisilicon/
 obj-$(CONFIG_QCOM_L2_PMU)	+= qcom_l2_pmu.o
 obj-$(CONFIG_QCOM_L3_PMU) += qcom_l3_pmu.o