Merge tag 'drm-misc-next-2017-06-02' of git://anongit.freedesktop.org/git/drm-misc into drm-next

Core Changes:
- Stop proliferation of drm_vblank_cleanup by adding to the docs and deleting
  boilerplate (Daniel)
- Roll out and use mode_valid hooks across crtc/encoder/bridge (Jose)
- Add drm_vblank.[hc] to isolate vblank code from optional irq helpers (Daniel)

Driver Changes:
- Replace drm_for_each_connector with drm_for_each_connector_iter (Gustavo)
- A couple misc driver fixes

Cc: Gustavo Padovan <gustavo.padovan@collabora.com>
Cc: Jose Abreu <Jose.Abreu@synopsys.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>

* tag 'drm-misc-next-2017-06-02' of git://anongit.freedesktop.org/git/drm-misc: (34 commits)
  drm/vc4: Mark the device as active when enabling runtime PM.
  drm: remove writeq/readq function definitions
  drm/atmel-hlcdc: Use crtc->mode_valid() callback
  drm/exynos: Drop drm_vblank_cleanup
  drm/hdlcd|mali: Drop drm_vblank_cleanup
  drm/doc: Polish irq helper documentation
  drm: Extract drm_vblank.[hc]
  drm/vc4: Fix comment in vc4_drv.h
  drm/pl111: fix warnings without CONFIG_ARM_AMBA
  drm/atomic: Consitfy mode parameter to drm_atomic_set_mode_for_crtc()
  drm/arcgpu: Drop drm_vblank_cleanup
  drm/atmel: Drop drm_vblank_cleanup
  drm/imx: Drop drm_vblank_cleanup
  drm/meson: Drop drm_vblank_cleanup
  drm/stm: Drop drm_vblank_cleanup
  drm/sun4i: Drop drm_vblank_cleanup
  drm: better document how to send out the crtc disable event
  drm: Use vsnprintf extension %ph
  drm/doc: move printf helpers out of drmP.h
  drm/pl111: select DRM_PANEL
  ...

Documentation/gpu/drm-internals.rst

@@ -149,60 +149,15 @@ Device Instance and Driver Handling
 Driver Load
 -----------
 
-IRQ Registration
-~~~~~~~~~~~~~~~~
-
-The DRM core tries to facilitate IRQ handler registration and
-unregistration by providing :c:func:`drm_irq_install()` and
-:c:func:`drm_irq_uninstall()` functions. Those functions only
-support a single interrupt per device, devices that use more than one
-IRQs need to be handled manually.
-
-Managed IRQ Registration
-''''''''''''''''''''''''
-
-:c:func:`drm_irq_install()` starts by calling the irq_preinstall
-driver operation. The operation is optional and must make sure that the
-interrupt will not get fired by clearing all pending interrupt flags or
-disabling the interrupt.
-
-The passed-in IRQ will then be requested by a call to
-:c:func:`request_irq()`. If the DRIVER_IRQ_SHARED driver feature
-flag is set, a shared (IRQF_SHARED) IRQ handler will be requested.
-
-The IRQ handler function must be provided as the mandatory irq_handler
-driver operation. It will get passed directly to
-:c:func:`request_irq()` and thus has the same prototype as all IRQ
-handlers. It will get called with a pointer to the DRM device as the
-second argument.
-
-Finally the function calls the optional irq_postinstall driver
-operation. The operation usually enables interrupts (excluding the
-vblank interrupt, which is enabled separately), but drivers may choose
-to enable/disable interrupts at a different time.
-
-:c:func:`drm_irq_uninstall()` is similarly used to uninstall an
-IRQ handler. It starts by waking up all processes waiting on a vblank
-interrupt to make sure they don't hang, and then calls the optional
-irq_uninstall driver operation. The operation must disable all hardware
-interrupts. Finally the function frees the IRQ by calling
-:c:func:`free_irq()`.
-
-Manual IRQ Registration
-'''''''''''''''''''''''
-
-Drivers that require multiple interrupt handlers can't use the managed
-IRQ registration functions. In that case IRQs must be registered and
-unregistered manually (usually with the :c:func:`request_irq()` and
-:c:func:`free_irq()` functions, or their :c:func:`devm_request_irq()` and
-:c:func:`devm_free_irq()` equivalents).
-
-When manually registering IRQs, drivers must not set the
-DRIVER_HAVE_IRQ driver feature flag, and must not provide the
-irq_handler driver operation. They must set the :c:type:`struct
-drm_device <drm_device>` irq_enabled field to 1 upon
-registration of the IRQs, and clear it to 0 after unregistering the
-IRQs.
+
+IRQ Helper Library
+~~~~~~~~~~~~~~~~~~
+
+.. kernel-doc:: drivers/gpu/drm/drm_irq.c
+   :doc: irq helpers
+
+.. kernel-doc:: drivers/gpu/drm/drm_irq.c
+   :export:
 
 Memory Manager Initialization
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Documentation/gpu/drm-kms.rst

@@ -612,8 +612,8 @@ operation handler.
 Vertical Blanking and Interrupt Handling Functions Reference
 ------------------------------------------------------------
 
-.. kernel-doc:: include/drm/drm_irq.h
+.. kernel-doc:: include/drm/drm_vblank.h
    :internal:
 
-.. kernel-doc:: drivers/gpu/drm/drm_irq.c
+.. kernel-doc:: drivers/gpu/drm/drm_vblank.c
    :export:

Documentation/gpu/todo.rst

@@ -177,19 +177,6 @@ following drivers still use ``struct_mutex``: ``msm``, ``omapdrm`` and
 
 Contact: Daniel Vetter, respective driver maintainers
 
-Switch to drm_connector_list_iter for any connector_list walking
-----------------------------------------------------------------
-
-Connectors can be hotplugged, and we now have a special list of helpers to walk
-the connector_list in a race-free fashion, without incurring deadlocks on
-mutexes and other fun stuff.
-
-Unfortunately most drivers are not converted yet. At least all those supporting
-DP MST hotplug should be converted, since for those drivers the difference
-matters. See drm_for_each_connector_iter() vs. drm_for_each_connector().
-
-Contact: Daniel Vetter
-
 Core refactorings
 =================
 

drivers/gpu/drm/Makefile

@@ -16,7 +16,7 @@ drm-y       :=	drm_auth.o drm_bufs.o drm_cache.o \
 		drm_framebuffer.o drm_connector.o drm_blend.o \
 		drm_encoder.o drm_mode_object.o drm_property.o \
 		drm_plane.o drm_color_mgmt.o drm_print.o \
-		drm_dumb_buffers.o drm_mode_config.o
+		drm_dumb_buffers.o drm_mode_config.o drm_vblank.o
 
 drm-$(CONFIG_DRM_LIB_RANDOM) += lib/drm_random.o
 drm-$(CONFIG_DRM_VM) += drm_vm.o

drivers/gpu/drm/arc/arcpgu_drv.c

@@ -155,7 +155,6 @@ static int arcpgu_unload(struct drm_device *drm)
 		arcpgu->fbdev = NULL;
 	}
 	drm_kms_helper_poll_fini(drm);
-	drm_vblank_cleanup(drm);
 	drm_mode_config_cleanup(drm);
 
 	return 0;

drivers/gpu/drm/arm/hdlcd_drv.c

@@ -340,7 +340,6 @@ static int hdlcd_drm_bind(struct device *dev)
 	}
 err_fbdev:
 	drm_kms_helper_poll_fini(drm);
-	drm_vblank_cleanup(drm);
 err_vblank:
 	pm_runtime_disable(drm->dev);
 err_pm_active:
@@ -368,7 +367,6 @@ static void hdlcd_drm_unbind(struct device *dev)
 	}
 	drm_kms_helper_poll_fini(drm);
 	component_unbind_all(dev, drm);
-	drm_vblank_cleanup(drm);
 	pm_runtime_get_sync(drm->dev);
 	drm_irq_uninstall(drm);
 	pm_runtime_put_sync(drm->dev);

drivers/gpu/drm/arm/malidp_drv.c

@@ -652,7 +652,6 @@ static int malidp_bind(struct device *dev)
 	drm_kms_helper_poll_fini(drm);
 fbdev_fail:
 	pm_runtime_get_sync(dev);
-	drm_vblank_cleanup(drm);
 vblank_fail:
 	malidp_se_irq_fini(drm);
 	malidp_de_irq_fini(drm);
@@ -692,7 +691,6 @@ static void malidp_unbind(struct device *dev)
 	}
 	drm_kms_helper_poll_fini(drm);
 	pm_runtime_get_sync(dev);
-	drm_vblank_cleanup(drm);
 	malidp_se_irq_fini(drm);
 	malidp_de_irq_fini(drm);
 	component_unbind_all(dev, drm);

drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c

@@ -140,13 +140,13 @@ static void atmel_hlcdc_crtc_mode_set_nofb(struct drm_crtc *c)
 			   cfg);
 }
 
-static bool atmel_hlcdc_crtc_mode_fixup(struct drm_crtc *c,
-					const struct drm_display_mode *mode,
-					struct drm_display_mode *adjusted_mode)
+static enum drm_mode_status
+atmel_hlcdc_crtc_mode_valid(struct drm_crtc *c,
+			    const struct drm_display_mode *mode)
 {
 	struct atmel_hlcdc_crtc *crtc = drm_crtc_to_atmel_hlcdc_crtc(c);
 
-	return atmel_hlcdc_dc_mode_valid(crtc->dc, adjusted_mode) == MODE_OK;
+	return atmel_hlcdc_dc_mode_valid(crtc->dc, mode);
 }
 
 static void atmel_hlcdc_crtc_disable(struct drm_crtc *c)
@@ -315,7 +315,7 @@ static void atmel_hlcdc_crtc_atomic_flush(struct drm_crtc *crtc,
 }
 
 static const struct drm_crtc_helper_funcs lcdc_crtc_helper_funcs = {
-	.mode_fixup = atmel_hlcdc_crtc_mode_fixup,
+	.mode_valid = atmel_hlcdc_crtc_mode_valid,
 	.mode_set = drm_helper_crtc_mode_set,
 	.mode_set_nofb = atmel_hlcdc_crtc_mode_set_nofb,
 	.mode_set_base = drm_helper_crtc_mode_set_base,

drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.c

@@ -375,8 +375,9 @@ static const struct of_device_id atmel_hlcdc_of_match[] = {
 };
 MODULE_DEVICE_TABLE(of, atmel_hlcdc_of_match);
 
-int atmel_hlcdc_dc_mode_valid(struct atmel_hlcdc_dc *dc,
-			      struct drm_display_mode *mode)
+enum drm_mode_status
+atmel_hlcdc_dc_mode_valid(struct atmel_hlcdc_dc *dc,
+			  const struct drm_display_mode *mode)
 {
 	int vfront_porch = mode->vsync_start - mode->vdisplay;
 	int vback_porch = mode->vtotal - mode->vsync_end;
@@ -678,7 +679,6 @@ static void atmel_hlcdc_dc_unload(struct drm_device *dev)
 	flush_workqueue(dc->wq);
 	drm_kms_helper_poll_fini(dev);
 	drm_mode_config_cleanup(dev);
-	drm_vblank_cleanup(dev);
 
 	pm_runtime_get_sync(dev->dev);
 	drm_irq_uninstall(dev);

drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.h

@@ -422,8 +422,9 @@ static inline void atmel_hlcdc_layer_init(struct atmel_hlcdc_layer *layer,
 	layer->regmap = regmap;
 }
 
-int atmel_hlcdc_dc_mode_valid(struct atmel_hlcdc_dc *dc,
-			      struct drm_display_mode *mode);
+enum drm_mode_status
+atmel_hlcdc_dc_mode_valid(struct atmel_hlcdc_dc *dc,
+			  const struct drm_display_mode *mode);
 
 int atmel_hlcdc_create_planes(struct drm_device *dev);
 void atmel_hlcdc_plane_irq(struct atmel_hlcdc_plane *plane);

drivers/gpu/drm/bridge/analogix-anx78xx.c

@@ -1061,18 +1061,18 @@ static int anx78xx_bridge_attach(struct drm_bridge *bridge)
 	return 0;
 }
 
-static bool anx78xx_bridge_mode_fixup(struct drm_bridge *bridge,
-				      const struct drm_display_mode *mode,
-				      struct drm_display_mode *adjusted_mode)
+static enum drm_mode_status
+anx78xx_bridge_mode_valid(struct drm_bridge *bridge,
+			  const struct drm_display_mode *mode)
 {
 	if (mode->flags & DRM_MODE_FLAG_INTERLACE)
-		return false;
+		return MODE_NO_INTERLACE;
 
 	/* Max 1200p at 5.4 Ghz, one lane */
 	if (mode->clock > 154000)
-		return false;
+		return MODE_CLOCK_HIGH;
 
-	return true;
+	return MODE_OK;
 }
 
 static void anx78xx_bridge_disable(struct drm_bridge *bridge)
@@ -1129,7 +1129,7 @@ static void anx78xx_bridge_enable(struct drm_bridge *bridge)
 
 static const struct drm_bridge_funcs anx78xx_bridge_funcs = {
 	.attach = anx78xx_bridge_attach,
-	.mode_fixup = anx78xx_bridge_mode_fixup,
+	.mode_valid = anx78xx_bridge_mode_valid,
 	.disable = anx78xx_bridge_disable,
 	.mode_set = anx78xx_bridge_mode_set,
 	.enable = anx78xx_bridge_enable,

drivers/gpu/drm/drm_atomic.c

@@ -328,7 +328,7 @@ static s32 __user *get_out_fence_for_crtc(struct drm_atomic_state *state,
  * Zero on success, error code on failure. Cannot return -EDEADLK.
  */
 int drm_atomic_set_mode_for_crtc(struct drm_crtc_state *state,
-				 struct drm_display_mode *mode)
+				 const struct drm_display_mode *mode)
 {
 	struct drm_mode_modeinfo umode;
 

drivers/gpu/drm/drm_atomic_helper.c

@@ -32,6 +32,7 @@
 #include <drm/drm_atomic_helper.h>
 #include <linux/dma-fence.h>
 
+#include "drm_crtc_helper_internal.h"
 #include "drm_crtc_internal.h"
 
 /**
@@ -452,6 +453,69 @@ mode_fixup(struct drm_atomic_state *state)
 	return 0;
 }
 
+static enum drm_mode_status mode_valid_path(struct drm_connector *connector,
+					    struct drm_encoder *encoder,
+					    struct drm_crtc *crtc,
+					    struct drm_display_mode *mode)
+{
+	enum drm_mode_status ret;
+
+	ret = drm_encoder_mode_valid(encoder, mode);
+	if (ret != MODE_OK) {
+		DRM_DEBUG_ATOMIC("[ENCODER:%d:%s] mode_valid() failed\n",
+				encoder->base.id, encoder->name);
+		return ret;
+	}
+
+	ret = drm_bridge_mode_valid(encoder->bridge, mode);
+	if (ret != MODE_OK) {
+		DRM_DEBUG_ATOMIC("[BRIDGE] mode_valid() failed\n");
+		return ret;
+	}
+
+	ret = drm_crtc_mode_valid(crtc, mode);
+	if (ret != MODE_OK) {
+		DRM_DEBUG_ATOMIC("[CRTC:%d:%s] mode_valid() failed\n",
+				crtc->base.id, crtc->name);
+		return ret;
+	}
+
+	return ret;
+}
+
+static int
+mode_valid(struct drm_atomic_state *state)
+{
+	struct drm_connector_state *conn_state;
+	struct drm_connector *connector;
+	int i;
+
+	for_each_new_connector_in_state(state, connector, conn_state, i) {
+		struct drm_encoder *encoder = conn_state->best_encoder;
+		struct drm_crtc *crtc = conn_state->crtc;
+		struct drm_crtc_state *crtc_state;
+		enum drm_mode_status mode_status;
+		struct drm_display_mode *mode;
+
+		if (!crtc || !encoder)
+			continue;
+
+		crtc_state = drm_atomic_get_new_crtc_state(state, crtc);
+		if (!crtc_state)
+			continue;
+		if (!crtc_state->mode_changed && !crtc_state->connectors_changed)
+			continue;
+
+		mode = &crtc_state->mode;
+
+		mode_status = mode_valid_path(connector, encoder, crtc, mode);
+		if (mode_status != MODE_OK)
+			return -EINVAL;
+	}
+
+	return 0;
+}
+
 /**
  * drm_atomic_helper_check_modeset - validate state object for modeset changes
  * @dev: DRM device
@@ -466,13 +530,15 @@ mode_fixup(struct drm_atomic_state *state)
  * 2. &drm_connector_helper_funcs.atomic_check to validate the connector state.
  * 3. If it's determined a modeset is needed then all connectors on the affected crtc
  *    crtc are added and &drm_connector_helper_funcs.atomic_check is run on them.
- * 4. &drm_bridge_funcs.mode_fixup is called on all encoder bridges.
- * 5. &drm_encoder_helper_funcs.atomic_check is called to validate any encoder state.
+ * 4. &drm_encoder_helper_funcs.mode_valid, &drm_bridge_funcs.mode_valid and
+ *    &drm_crtc_helper_funcs.mode_valid are called on the affected components.
+ * 5. &drm_bridge_funcs.mode_fixup is called on all encoder bridges.
+ * 6. &drm_encoder_helper_funcs.atomic_check is called to validate any encoder state.
  *    This function is only called when the encoder will be part of a configured crtc,
  *    it must not be used for implementing connector property validation.
  *    If this function is NULL, &drm_atomic_encoder_helper_funcs.mode_fixup is called
  *    instead.
- * 6. &drm_crtc_helper_funcs.mode_fixup is called last, to fix up the mode with crtc constraints.
+ * 7. &drm_crtc_helper_funcs.mode_fixup is called last, to fix up the mode with crtc constraints.
  *
  * &drm_crtc_state.mode_changed is set when the input mode is changed.
  * &drm_crtc_state.connectors_changed is set when a connector is added or
@@ -617,6 +683,10 @@ drm_atomic_helper_check_modeset(struct drm_device *dev,
 			return ret;
 	}
 
+	ret = mode_valid(state);
+	if (ret)
+		return ret;
+
 	return mode_fixup(state);
 }
 EXPORT_SYMBOL(drm_atomic_helper_check_modeset);

drivers/gpu/drm/drm_bridge.c

@@ -205,6 +205,39 @@ bool drm_bridge_mode_fixup(struct drm_bridge *bridge,
 }
 EXPORT_SYMBOL(drm_bridge_mode_fixup);
 
+/**
+ * drm_bridge_mode_valid - validate the mode against all bridges in the
+ * 			   encoder chain.
+ * @bridge: bridge control structure
+ * @mode: desired mode to be validated
+ *
+ * Calls &drm_bridge_funcs.mode_valid for all the bridges in the encoder
+ * chain, starting from the first bridge to the last. If at least one bridge
+ * does not accept the mode the function returns the error code.
+ *
+ * Note: the bridge passed should be the one closest to the encoder.
+ *
+ * RETURNS:
+ * MODE_OK on success, drm_mode_status Enum error code on failure
+ */
+enum drm_mode_status drm_bridge_mode_valid(struct drm_bridge *bridge,
+					   const struct drm_display_mode *mode)
+{
+	enum drm_mode_status ret = MODE_OK;
+
+	if (!bridge)
+		return ret;
+
+	if (bridge->funcs->mode_valid)
+		ret = bridge->funcs->mode_valid(bridge, mode);
+
+	if (ret != MODE_OK)
+		return ret;
+
+	return drm_bridge_mode_valid(bridge->next, mode);
+}
+EXPORT_SYMBOL(drm_bridge_mode_valid);
+
 /**
  * drm_bridge_disable - disables all bridges in the encoder chain
  * @bridge: bridge control structure

drivers/gpu/drm/drm_crtc_helper_internal.h

@@ -26,7 +26,11 @@
  * implementation details and are not exported to drivers.
  */
 
+#include <drm/drm_connector.h>
+#include <drm/drm_crtc.h>
 #include <drm/drm_dp_helper.h>
+#include <drm/drm_encoder.h>
+#include <drm/drm_modes.h>
 
 /* drm_fb_helper.c */
 #ifdef CONFIG_DRM_FBDEV_EMULATION
@@ -63,3 +67,11 @@ static inline void drm_dp_aux_unregister_devnode(struct drm_dp_aux *aux)
 {
 }
 #endif
+
+/* drm_probe_helper.c */
+enum drm_mode_status drm_crtc_mode_valid(struct drm_crtc *crtc,
+					 const struct drm_display_mode *mode);
+enum drm_mode_status drm_encoder_mode_valid(struct drm_encoder *encoder,
+					    const struct drm_display_mode *mode);
+enum drm_mode_status drm_connector_mode_valid(struct drm_connector *connector,
+					      struct drm_display_mode *mode);

drivers/gpu/drm/drm_dp_mst_topology.c

@@ -2836,16 +2836,15 @@ static void drm_dp_mst_dump_mstb(struct seq_file *m,
 static bool dump_dp_payload_table(struct drm_dp_mst_topology_mgr *mgr,
 				  char *buf)
 {
-	int ret;
 	int i;
-	for (i = 0; i < 4; i++) {
-		ret = drm_dp_dpcd_read(mgr->aux, DP_PAYLOAD_TABLE_UPDATE_STATUS + (i * 16), &buf[i * 16], 16);
-		if (ret != 16)
-			break;
+
+	for (i = 0; i < 64; i += 16) {
+		if (drm_dp_dpcd_read(mgr->aux,
+				     DP_PAYLOAD_TABLE_UPDATE_STATUS + i,
+				     &buf[i], 16) != 16)
+			return false;
 	}
-	if (i == 4)
 	return true;
-	return false;
 }
 
 static void fetch_monitor_name(struct drm_dp_mst_topology_mgr *mgr,
@@ -2909,42 +2908,24 @@ void drm_dp_mst_dump_topology(struct seq_file *m,
 	mutex_lock(&mgr->lock);
 	if (mgr->mst_primary) {
 		u8 buf[64];
-		bool bret;
 		int ret;
+
 		ret = drm_dp_dpcd_read(mgr->aux, DP_DPCD_REV, buf, DP_RECEIVER_CAP_SIZE);
-		seq_printf(m, "dpcd: ");
-		for (i = 0; i < DP_RECEIVER_CAP_SIZE; i++)
-			seq_printf(m, "%02x ", buf[i]);
-		seq_printf(m, "\n");
+		seq_printf(m, "dpcd: %*ph\n", DP_RECEIVER_CAP_SIZE, buf);
 		ret = drm_dp_dpcd_read(mgr->aux, DP_FAUX_CAP, buf, 2);
-		seq_printf(m, "faux/mst: ");
-		for (i = 0; i < 2; i++)
-			seq_printf(m, "%02x ", buf[i]);
-		seq_printf(m, "\n");
+		seq_printf(m, "faux/mst: %*ph\n", 2, buf);
 		ret = drm_dp_dpcd_read(mgr->aux, DP_MSTM_CTRL, buf, 1);
-		seq_printf(m, "mst ctrl: ");
-		for (i = 0; i < 1; i++)
-			seq_printf(m, "%02x ", buf[i]);
-		seq_printf(m, "\n");
+		seq_printf(m, "mst ctrl: %*ph\n", 1, buf);
 
 		/* dump the standard OUI branch header */
 		ret = drm_dp_dpcd_read(mgr->aux, DP_BRANCH_OUI, buf, DP_BRANCH_OUI_HEADER_SIZE);
-		seq_printf(m, "branch oui: ");
-		for (i = 0; i < 0x3; i++)
-			seq_printf(m, "%02x", buf[i]);
-		seq_printf(m, " devid: ");
+		seq_printf(m, "branch oui: %*phN devid: ", 3, buf);
 		for (i = 0x3; i < 0x8 && buf[i]; i++)
 			seq_printf(m, "%c", buf[i]);
-
-		seq_printf(m, " revision: hw: %x.%x sw: %x.%x", buf[0x9] >> 4, buf[0x9] & 0xf, buf[0xa], buf[0xb]);
-		seq_printf(m, "\n");
-		bret = dump_dp_payload_table(mgr, buf);
-		if (bret == true) {
-			seq_printf(m, "payload table: ");
-			for (i = 0; i < 63; i++)
-				seq_printf(m, "%02x ", buf[i]);
-			seq_printf(m, "\n");
-		}
+		seq_printf(m, " revision: hw: %x.%x sw: %x.%x\n",
+			   buf[0x9] >> 4, buf[0x9] & 0xf, buf[0xa], buf[0xb]);
+		if (dump_dp_payload_table(mgr, buf))
+			seq_printf(m, "payload table: %*ph\n", 63, buf);
 
 	}
 

drivers/gpu/drm/drm_internal.h

@@ -53,8 +53,9 @@ int drm_name_info(struct seq_file *m, void *data);
 int drm_clients_info(struct seq_file *m, void* data);
 int drm_gem_name_info(struct seq_file *m, void *data);
 
-/* drm_irq.c */
+/* drm_vblank.c */
 extern unsigned int drm_timestamp_monotonic;
+void drm_vblank_disable_and_save(struct drm_device *dev, unsigned int pipe);
 
 /* IOCTLS */
 int drm_wait_vblank(struct drm_device *dev, void *data,

drivers/gpu/drm/drm_probe_helper.c

@@ -38,6 +38,9 @@
 #include <drm/drm_crtc_helper.h>
 #include <drm/drm_fb_helper.h>
 #include <drm/drm_edid.h>
+#include <drm/drm_modeset_helper_vtables.h>
+
+#include "drm_crtc_helper_internal.h"
 
 /**
  * DOC: output probing helper overview
@@ -80,6 +83,61 @@ drm_mode_validate_flag(const struct drm_display_mode *mode,
 	return MODE_OK;
 }
 
+static enum drm_mode_status
+drm_mode_validate_pipeline(struct drm_display_mode *mode,
+			    struct drm_connector *connector)
+{
+	struct drm_device *dev = connector->dev;
+	uint32_t *ids = connector->encoder_ids;
+	enum drm_mode_status ret = MODE_OK;
+	unsigned int i;
+
+	/* Step 1: Validate against connector */
+	ret = drm_connector_mode_valid(connector, mode);
+	if (ret != MODE_OK)
+		return ret;
+
+	/* Step 2: Validate against encoders and crtcs */
+	for (i = 0; i < DRM_CONNECTOR_MAX_ENCODER; i++) {
+		struct drm_encoder *encoder = drm_encoder_find(dev, ids[i]);
+		struct drm_crtc *crtc;
+
+		if (!encoder)
+			continue;
+
+		ret = drm_encoder_mode_valid(encoder, mode);
+		if (ret != MODE_OK) {
+			/* No point in continuing for crtc check as this encoder
+			 * will not accept the mode anyway. If all encoders
+			 * reject the mode then, at exit, ret will not be
+			 * MODE_OK. */
+			continue;
+		}
+
+		ret = drm_bridge_mode_valid(encoder->bridge, mode);
+		if (ret != MODE_OK) {
+			/* There is also no point in continuing for crtc check
+			 * here. */
+			continue;
+		}
+
+		drm_for_each_crtc(crtc, dev) {
+			if (!drm_encoder_crtc_ok(encoder, crtc))
+				continue;
+
+			ret = drm_crtc_mode_valid(crtc, mode);
+			if (ret == MODE_OK) {
+				/* If we get to this point there is at least
+				 * one combination of encoder+crtc that works
+				 * for this mode. Lets return now. */
+				return ret;
+			}
+		}
+	}
+
+	return ret;
+}
+
 static int drm_helper_probe_add_cmdline_mode(struct drm_connector *connector)
 {
 	struct drm_cmdline_mode *cmdline_mode;
@@ -113,6 +171,41 @@ static int drm_helper_probe_add_cmdline_mode(struct drm_connector *connector)
 	return 1;
 }
 
+enum drm_mode_status drm_crtc_mode_valid(struct drm_crtc *crtc,
+					 const struct drm_display_mode *mode)
+{
+	const struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private;
+
+	if (!crtc_funcs || !crtc_funcs->mode_valid)
+		return MODE_OK;
+
+	return crtc_funcs->mode_valid(crtc, mode);
+}
+
+enum drm_mode_status drm_encoder_mode_valid(struct drm_encoder *encoder,
+					    const struct drm_display_mode *mode)
+{
+	const struct drm_encoder_helper_funcs *encoder_funcs =
+		encoder->helper_private;
+
+	if (!encoder_funcs || !encoder_funcs->mode_valid)
+		return MODE_OK;
+
+	return encoder_funcs->mode_valid(encoder, mode);
+}
+
+enum drm_mode_status drm_connector_mode_valid(struct drm_connector *connector,
+					      struct drm_display_mode *mode)
+{
+	const struct drm_connector_helper_funcs *connector_funcs =
+		connector->helper_private;
+
+	if (!connector_funcs || !connector_funcs->mode_valid)
+		return MODE_OK;
+
+	return connector_funcs->mode_valid(connector, mode);
+}
+
 #define DRM_OUTPUT_POLL_PERIOD (10*HZ)
 /**
  * drm_kms_helper_poll_enable - re-enable output polling.
@@ -284,7 +377,11 @@ EXPORT_SYMBOL(drm_helper_probe_detect);
  *    - drm_mode_validate_flag() checks the modes against basic connector
  *      capabilities (interlace_allowed,doublescan_allowed,stereo_allowed)
  *    - the optional &drm_connector_helper_funcs.mode_valid helper can perform
- *      driver and/or hardware specific checks
+ *      driver and/or sink specific checks
+ *    - the optional &drm_crtc_helper_funcs.mode_valid,
+ *      &drm_bridge_funcs.mode_valid and &drm_encoder_helper_funcs.mode_valid
+ *      helpers can perform driver and/or source specific checks which are also
+ *      enforced by the modeset/atomic helpers
  *
  * 5. Any mode whose status is not OK is pruned from the connector's modes list,
  *    accompanied by a debug message indicating the reason for the mode's
@@ -428,9 +525,9 @@ int drm_helper_probe_single_connector_modes(struct drm_connector *connector,
 		if (mode->status == MODE_OK)
 			mode->status = drm_mode_validate_flag(mode, mode_flags);
 
-		if (mode->status == MODE_OK && connector_funcs->mode_valid)
-			mode->status = connector_funcs->mode_valid(connector,
-								   mode);
+		if (mode->status == MODE_OK)
+			mode->status = drm_mode_validate_pipeline(mode,
+								  connector);
 	}
 
 prune:

drivers/gpu/drm/exynos/exynos_drm_drv.c

@@ -171,12 +171,13 @@ static int exynos_drm_suspend(struct device *dev)
 {
 	struct drm_device *drm_dev = dev_get_drvdata(dev);
 	struct drm_connector *connector;
+	struct drm_connector_list_iter conn_iter;
 
 	if (pm_runtime_suspended(dev) || !drm_dev)
 		return 0;
 
-	drm_modeset_lock_all(drm_dev);
-	drm_for_each_connector(connector, drm_dev) {
+	drm_connector_list_iter_begin(drm_dev, &conn_iter);
+	drm_for_each_connector_iter(connector, &conn_iter) {
 		int old_dpms = connector->dpms;
 
 		if (connector->funcs->dpms)
@@ -185,7 +186,7 @@ static int exynos_drm_suspend(struct device *dev)
 		/* Set the old mode back to the connector for resume */
 		connector->dpms = old_dpms;
 	}
-	drm_modeset_unlock_all(drm_dev);
+	drm_connector_list_iter_end(&conn_iter);
 
 	return 0;
 }
@@ -194,12 +195,13 @@ static int exynos_drm_resume(struct device *dev)
 {
 	struct drm_device *drm_dev = dev_get_drvdata(dev);
 	struct drm_connector *connector;
+	struct drm_connector_list_iter conn_iter;
 
 	if (pm_runtime_suspended(dev) || !drm_dev)
 		return 0;
 
-	drm_modeset_lock_all(drm_dev);
-	drm_for_each_connector(connector, drm_dev) {
+	drm_connector_list_iter_begin(drm_dev, &conn_iter);
+	drm_for_each_connector_iter(connector, &conn_iter) {
 		if (connector->funcs->dpms) {
 			int dpms = connector->dpms;
 
@@ -207,7 +209,7 @@ static int exynos_drm_resume(struct device *dev)
 			connector->funcs->dpms(connector, dpms);
 		}
 	}
-	drm_modeset_unlock_all(drm_dev);
+	drm_connector_list_iter_end(&conn_iter);
 
 	return 0;
 }
@@ -376,7 +378,7 @@ static int exynos_drm_bind(struct device *dev)
 	/* Probe non kms sub drivers and virtual display driver. */
 	ret = exynos_drm_device_subdrv_probe(drm);
 	if (ret)
-		goto err_cleanup_vblank;
+		goto err_unbind_all;
 
 	drm_mode_config_reset(drm);
 
@@ -407,8 +409,6 @@ static int exynos_drm_bind(struct device *dev)
 	exynos_drm_fbdev_fini(drm);
 	drm_kms_helper_poll_fini(drm);
 	exynos_drm_device_subdrv_remove(drm);
-err_cleanup_vblank:
-	drm_vblank_cleanup(drm);
 err_unbind_all:
 	component_unbind_all(drm->dev, drm);
 err_mode_config_cleanup:

drivers/gpu/drm/i915/intel_display.c

@@ -11400,6 +11400,7 @@ static bool check_digital_port_conflicts(struct drm_atomic_state *state)
 {
 	struct drm_device *dev = state->dev;
 	struct drm_connector *connector;
+	struct drm_connector_list_iter conn_iter;
 	unsigned int used_ports = 0;
 	unsigned int used_mst_ports = 0;
 
@@ -11408,7 +11409,8 @@ static bool check_digital_port_conflicts(struct drm_atomic_state *state)
 	 * list to detect the problem on ddi platforms
 	 * where there's just one encoder per digital port.
 	 */
-	drm_for_each_connector(connector, dev) {
+	drm_connector_list_iter_begin(dev, &conn_iter);
+	drm_for_each_connector_iter(connector, &conn_iter) {
 		struct drm_connector_state *connector_state;
 		struct intel_encoder *encoder;
 
@@ -11447,6 +11449,7 @@ static bool check_digital_port_conflicts(struct drm_atomic_state *state)
 			break;
 		}
 	}
+	drm_connector_list_iter_end(&conn_iter);
 
 	/* can't mix MST and SST/HDMI on the same port */
 	if (used_ports & used_mst_ports)

drivers/gpu/drm/imx/imx-drm-core.c

@@ -278,7 +278,7 @@ static int imx_drm_bind(struct device *dev)
 	/* Now try and bind all our sub-components */
 	ret = component_bind_all(dev, drm);
 	if (ret)
-		goto err_vblank;
+		goto err_kms;
 
 	drm_mode_config_reset(drm);
 
@@ -316,8 +316,6 @@ static int imx_drm_bind(struct device *dev)
 err_unbind:
 #endif
 	component_unbind_all(drm->dev, drm);
-err_vblank:
-	drm_vblank_cleanup(drm);
 err_kms:
 	drm_mode_config_cleanup(drm);
 err_unref:

drivers/gpu/drm/mediatek/mtk_drm_crtc.c

@@ -221,6 +221,7 @@ static int mtk_crtc_ddp_hw_init(struct mtk_drm_crtc *mtk_crtc)
 	struct drm_crtc *crtc = &mtk_crtc->base;
 	struct drm_connector *connector;
 	struct drm_encoder *encoder;
+	struct drm_connector_list_iter conn_iter;
 	unsigned int width, height, vrefresh, bpc = MTK_MAX_BPC;
 	int ret;
 	int i;
@@ -237,13 +238,15 @@ static int mtk_crtc_ddp_hw_init(struct mtk_drm_crtc *mtk_crtc)
 		if (encoder->crtc != crtc)
 			continue;
 
-		drm_for_each_connector(connector, crtc->dev) {
+		drm_connector_list_iter_begin(crtc->dev, &conn_iter);
+		drm_for_each_connector_iter(connector, &conn_iter) {
 			if (connector->encoder != encoder)
 				continue;
 			if (connector->display_info.bpc != 0 &&
 			    bpc > connector->display_info.bpc)
 				bpc = connector->display_info.bpc;
 		}
+		drm_connector_list_iter_end(&conn_iter);
 	}
 
 	ret = pm_runtime_get_sync(crtc->dev->dev);

drivers/gpu/drm/meson/meson_drv.c

@@ -285,7 +285,6 @@ static void meson_drv_unbind(struct device *dev)
 	drm_kms_helper_poll_fini(drm);
 	drm_fbdev_cma_fini(priv->fbdev);
 	drm_mode_config_cleanup(drm);
-	drm_vblank_cleanup(drm);
 	drm_dev_unref(drm);
 
 }

drivers/gpu/drm/nouveau/nv50_display.c

@@ -2872,17 +2872,20 @@ nv50_msto_enable(struct drm_encoder *encoder)
 	struct nv50_mstc *mstc = NULL;
 	struct nv50_mstm *mstm = NULL;
 	struct drm_connector *connector;
+	struct drm_connector_list_iter conn_iter;
 	u8 proto, depth;
 	int slots;
 	bool r;
 
-	drm_for_each_connector(connector, encoder->dev) {
+	drm_connector_list_iter_begin(encoder->dev, &conn_iter);
+	drm_for_each_connector_iter(connector, &conn_iter) {
 		if (connector->state->best_encoder == &msto->encoder) {
 			mstc = nv50_mstc(connector);
 			mstm = mstc->mstm;
 			break;
 		}
 	}
+	drm_connector_list_iter_end(&conn_iter);
 
 	if (WARN_ON(!mstc))
 		return;

drivers/gpu/drm/pl111/Kconfig

@@ -6,6 +6,7 @@ config DRM_PL111
 	select DRM_KMS_HELPER
 	select DRM_KMS_CMA_HELPER
 	select DRM_GEM_CMA_HELPER
+	select DRM_PANEL
 	select VT_HW_CONSOLE_BINDING if FRAMEBUFFER_CONSOLE
 	help
 	  Choose this option for DRM support for the PL111 CLCD controller.

drivers/gpu/drm/pl111/pl111_drv.c

@@ -179,7 +179,6 @@ static struct drm_driver pl111_drm_driver = {
 #endif
 };
 
-#ifdef CONFIG_ARM_AMBA
 static int pl111_amba_probe(struct amba_device *amba_dev,
 			    const struct amba_id *id)
 {
@@ -252,7 +251,7 @@ static struct amba_id pl111_id_table[] = {
 	{0, 0},
 };
 
-static struct amba_driver pl111_amba_driver = {
+static struct amba_driver pl111_amba_driver __maybe_unused = {
 	.drv = {
 		.name = "drm-clcd-pl111",
 	},
@@ -261,8 +260,9 @@ static struct amba_driver pl111_amba_driver = {
 	.id_table = pl111_id_table,
 };
 
+#ifdef CONFIG_ARM_AMBA
 module_amba_driver(pl111_amba_driver);
-#endif /* CONFIG_ARM_AMBA */
+#endif
 
 MODULE_DESCRIPTION(DRIVER_DESC);
 MODULE_AUTHOR("ARM Ltd.");

drivers/gpu/drm/rockchip/rockchip_drm_vop.c

@@ -1118,16 +1118,17 @@ static void vop_crtc_destroy_state(struct drm_crtc *crtc,
 #ifdef CONFIG_DRM_ANALOGIX_DP
 static struct drm_connector *vop_get_edp_connector(struct vop *vop)
 {
-	struct drm_crtc *crtc = &vop->crtc;
 	struct drm_connector *connector;
+	struct drm_connector_list_iter conn_iter;
 
-	mutex_lock(&crtc->dev->mode_config.mutex);
-	drm_for_each_connector(connector, crtc->dev)
+	drm_connector_list_iter_begin(vop->drm_dev, &conn_iter);
+	drm_for_each_connector_iter(connector, &conn_iter) {
 		if (connector->connector_type == DRM_MODE_CONNECTOR_eDP) {
-			mutex_unlock(&crtc->dev->mode_config.mutex);
+			drm_connector_list_iter_end(&conn_iter);
 			return connector;
 		}
-	mutex_unlock(&crtc->dev->mode_config.mutex);
+	}
+	drm_connector_list_iter_end(&conn_iter);
 
 	return NULL;
 }

drivers/gpu/drm/stm/ltdc.c

@@ -1144,8 +1144,6 @@ void ltdc_unload(struct drm_device *ddev)
 
 	DRM_DEBUG_DRIVER("\n");
 
-	drm_vblank_cleanup(ddev);
-
 	if (ldev->panel)
 		drm_panel_detach(ldev->panel);
 

drivers/gpu/drm/sun4i/sun4i_drv.c

@@ -138,7 +138,6 @@ static int sun4i_drv_bind(struct device *dev)
 	sun4i_framebuffer_free(drm);
 cleanup_mode_config:
 	drm_mode_config_cleanup(drm);
-	drm_vblank_cleanup(drm);
 free_mem_region:
 	of_reserved_mem_device_release(dev);
 free_drm:
@@ -154,7 +153,6 @@ static void sun4i_drv_unbind(struct device *dev)
 	drm_kms_helper_poll_fini(drm);
 	sun4i_framebuffer_free(drm);
 	drm_mode_config_cleanup(drm);
-	drm_vblank_cleanup(drm);
 	of_reserved_mem_device_release(dev);
 	drm_dev_unref(drm);
 }

drivers/gpu/drm/tinydrm/mipi-dbi.c

@@ -914,7 +914,7 @@ static int mipi_dbi_debugfs_command_show(struct seq_file *m, void *unused)
 {
 	struct mipi_dbi *mipi = m->private;
 	u8 cmd, val[4];
-	size_t len, i;
+	size_t len;
 	int ret;
 
 	for (cmd = 0; cmd < 255; cmd++) {
@@ -943,10 +943,7 @@ static int mipi_dbi_debugfs_command_show(struct seq_file *m, void *unused)
 			seq_puts(m, "XX\n");
 			continue;
 		}
-
-		for (i = 0; i < len; i++)
-			seq_printf(m, "%02x", val[i]);
-		seq_puts(m, "\n");
+		seq_printf(m, "%*phN\n", (int)len, val);
 	}
 
 	return 0;

drivers/gpu/drm/vc4/vc4_crtc.c

@@ -345,12 +345,16 @@ static u32 vc4_get_fifo_full_level(u32 format)
 static struct drm_encoder *vc4_get_crtc_encoder(struct drm_crtc *crtc)
 {
 	struct drm_connector *connector;
+	struct drm_connector_list_iter conn_iter;
 
-	drm_for_each_connector(connector, crtc->dev) {
+	drm_connector_list_iter_begin(crtc->dev, &conn_iter);
+	drm_for_each_connector_iter(connector, &conn_iter) {
 		if (connector->state->crtc == crtc) {
+			drm_connector_list_iter_end(&conn_iter);
 			return connector->encoder;
 		}
 	}
+	drm_connector_list_iter_end(&conn_iter);
 
 	return NULL;
 }

drivers/gpu/drm/vc4/vc4_drv.h

@@ -532,7 +532,7 @@ int vc4_queue_seqno_cb(struct drm_device *dev,
 extern struct platform_driver vc4_hdmi_driver;
 int vc4_hdmi_debugfs_regs(struct seq_file *m, void *unused);
 
-/* vc4_hdmi.c */
+/* vc4_vec.c */
 extern struct platform_driver vc4_vec_driver;
 int vc4_vec_debugfs_regs(struct seq_file *m, void *unused);
 

drivers/gpu/drm/vc4/vc4_v3d.c

@@ -401,6 +401,7 @@ static int vc4_v3d_bind(struct device *dev, struct device *master, void *data)
 		return ret;
 	}
 
+	pm_runtime_set_active(dev);
 	pm_runtime_use_autosuspend(dev);
 	pm_runtime_set_autosuspend_delay(dev, 40); /* a little over 2 frames. */
 	pm_runtime_enable(dev);

drivers/gpu/drm/virtio/virtgpu_drm_bus.c

@@ -56,7 +56,6 @@ int drm_virtio_init(struct drm_driver *driver, struct virtio_device *vdev)
 	dev = drm_dev_alloc(driver, &vdev->dev);
 	if (IS_ERR(dev))
 		return PTR_ERR(dev);
-	dev->virtdev = vdev;
 	vdev->priv = dev;
 
 	if (strcmp(vdev->dev.parent->bus->name, "pci") == 0) {

drivers/gpu/drm/virtio/virtgpu_kms.c

@@ -138,7 +138,7 @@ int virtio_gpu_driver_load(struct drm_device *dev, unsigned long flags)
 	u32 num_scanouts, num_capsets;
 	int ret;
 
-	if (!virtio_has_feature(dev->virtdev, VIRTIO_F_VERSION_1))
+	if (!virtio_has_feature(dev_to_virtio(dev->dev), VIRTIO_F_VERSION_1))
 		return -ENODEV;
 
 	vgdev = kzalloc(sizeof(struct virtio_gpu_device), GFP_KERNEL);
@@ -147,7 +147,7 @@ int virtio_gpu_driver_load(struct drm_device *dev, unsigned long flags)
 
 	vgdev->ddev = dev;
 	dev->dev_private = vgdev;
-	vgdev->vdev = dev->virtdev;
+	vgdev->vdev = dev_to_virtio(dev->dev);
 	vgdev->dev = dev->dev;
 
 	spin_lock_init(&vgdev->display_info_lock);

include/drm/drmP.h

@@ -80,6 +80,9 @@
 #include <drm/drm_debugfs.h>
 #include <drm/drm_ioctl.h>
 #include <drm/drm_sysfs.h>
+#include <drm/drm_vblank.h>
+#include <drm/drm_irq.h>
+
 
 struct module;
 
@@ -292,23 +295,6 @@ struct pci_controller;
 /* Format strings and argument splitters to simplify printing
  * various "complex" objects
  */
-#define DRM_MODE_FMT    "%d:\"%s\" %d %d %d %d %d %d %d %d %d %d 0x%x 0x%x"
-#define DRM_MODE_ARG(m) \
-	(m)->base.id, (m)->name, (m)->vrefresh, (m)->clock, \
-	(m)->hdisplay, (m)->hsync_start, (m)->hsync_end, (m)->htotal, \
-	(m)->vdisplay, (m)->vsync_start, (m)->vsync_end, (m)->vtotal, \
-	(m)->type, (m)->flags
-
-#define DRM_RECT_FMT    "%dx%d%+d%+d"
-#define DRM_RECT_ARG(r) drm_rect_width(r), drm_rect_height(r), (r)->x1, (r)->y1
-
-/* for rect's in fixed-point format: */
-#define DRM_RECT_FP_FMT "%d.%06ux%d.%06u%+d.%06u%+d.%06u"
-#define DRM_RECT_FP_ARG(r) \
-		drm_rect_width(r) >> 16, ((drm_rect_width(r) & 0xffff) * 15625) >> 10, \
-		drm_rect_height(r) >> 16, ((drm_rect_height(r) & 0xffff) * 15625) >> 10, \
-		(r)->x1 >> 16, (((r)->x1 & 0xffff) * 15625) >> 10, \
-		(r)->y1 >> 16, (((r)->y1 & 0xffff) * 15625) >> 10
 
 /*@}*/
 
@@ -391,8 +377,13 @@ struct drm_device {
 	int last_context;		/**< Last current context */
 	/*@} */
 
-	/** \name VBLANK IRQ support */
-	/*@{ */
+	/**
+	 * @irq_enabled:
+	 *
+	 * Indicates that interrupt handling is enabled, specifically vblank
+	 * handling. Drivers which don't use drm_irq_install() need to set this
+	 * to true manually.
+	 */
 	bool irq_enabled;
 	int irq;
 
@@ -429,8 +420,6 @@ struct drm_device {
 	struct pci_controller *hose;
 #endif
 
-	struct virtio_device *virtdev;
-
 	struct drm_sg_mem *sg;	/**< Scatter gather memory */
 	unsigned int num_crtcs;                  /**< Number of CRTCs on this device */
 
@@ -466,8 +455,6 @@ static inline bool drm_drv_uses_atomic_modeset(struct drm_device *dev)
 	return dev->mode_config.funcs->atomic_commit != NULL;
 }
 
-#include <drm/drm_irq.h>
-
 #define DRM_SWITCH_POWER_ON 0
 #define DRM_SWITCH_POWER_OFF 1
 #define DRM_SWITCH_POWER_CHANGING 2

include/drm/drm_atomic.h

@@ -520,7 +520,7 @@ __drm_atomic_get_current_plane_state(struct drm_atomic_state *state,
 
 int __must_check
 drm_atomic_set_mode_for_crtc(struct drm_crtc_state *state,
-			     struct drm_display_mode *mode);
+			     const struct drm_display_mode *mode);
 int __must_check
 drm_atomic_set_mode_prop_for_crtc(struct drm_crtc_state *state,
 				  struct drm_property_blob *blob);

include/drm/drm_bridge.h

@@ -253,6 +253,8 @@ int drm_bridge_attach(struct drm_encoder *encoder, struct drm_bridge *bridge,
 bool drm_bridge_mode_fixup(struct drm_bridge *bridge,
 			const struct drm_display_mode *mode,
 			struct drm_display_mode *adjusted_mode);
+enum drm_mode_status drm_bridge_mode_valid(struct drm_bridge *bridge,
+					   const struct drm_display_mode *mode);
 void drm_bridge_disable(struct drm_bridge *bridge);
 void drm_bridge_post_disable(struct drm_bridge *bridge);
 void drm_bridge_mode_set(struct drm_bridge *bridge,

include/drm/drm_connector.h

@@ -1009,21 +1009,6 @@ struct drm_tile_group *drm_mode_get_tile_group(struct drm_device *dev,
 void drm_mode_put_tile_group(struct drm_device *dev,
 			     struct drm_tile_group *tg);
 
-/**
- * drm_for_each_connector - iterate over all connectors
- * @connector: the loop cursor
- * @dev: the DRM device
- *
- * Iterate over all connectors of @dev.
- *
- * WARNING:
- *
- * This iterator is not safe against hotadd/removal of connectors and is
- * deprecated. Use drm_for_each_connector_iter() instead.
- */
-#define drm_for_each_connector(connector, dev) \
-	list_for_each_entry(connector, &(dev)->mode_config.connector_list, head)
-
 /**
  * struct drm_connector_list_iter - connector_list iterator
  *

include/drm/drm_crtc.h

@@ -214,7 +214,9 @@ struct drm_crtc_state {
 	 *    atomic commit. In that case the event can be send out any time
 	 *    after the hardware has stopped scanning out the current
 	 *    framebuffers. It should contain the timestamp and counter for the
-	 *    last vblank before the display pipeline was shut off.
+	 *    last vblank before the display pipeline was shut off. The simplest
+	 *    way to achieve that is calling drm_crtc_send_vblank_event()
+	 *    somewhen after drm_crtc_vblank_off() has been called.
 	 *
 	 *  - For a CRTC which is enabled at the end of the commit (even when it
 	 *    undergoes an full modeset) the vblank timestamp and counter must

include/drm/drm_drv.h

@@ -327,11 +327,40 @@ struct drm_driver {
 				     struct timeval *vblank_time,
 				     bool in_vblank_irq);
 
-	/* these have to be filled in */
-
+	/**
+	 * @irq_handler:
+	 *
+	 * Interrupt handler called when using drm_irq_install(). Not used by
+	 * drivers which implement their own interrupt handling.
+	 */
 	irqreturn_t(*irq_handler) (int irq, void *arg);
+
+	/**
+	 * @irq_preinstall:
+	 *
+	 * Optional callback used by drm_irq_install() which is called before
+	 * the interrupt handler is registered. This should be used to clear out
+	 * any pending interrupts (from e.g. firmware based drives) and reset
+	 * the interrupt handling registers.
+	 */
 	void (*irq_preinstall) (struct drm_device *dev);
+
+	/**
+	 * @irq_postinstall:
+	 *
+	 * Optional callback used by drm_irq_install() which is called after
+	 * the interrupt handler is registered. This should be used to enable
+	 * interrupt generation in the hardware.
+	 */
 	int (*irq_postinstall) (struct drm_device *dev);
+
+	/**
+	 * @irq_uninstall:
+	 *
+	 * Optional callback used by drm_irq_uninstall() which is called before
+	 * the interrupt handler is unregistered. This should be used to disable
+	 * interrupt generation in the hardware.
+	 */
 	void (*irq_uninstall) (struct drm_device *dev);
 
 	/**

include/drm/drm_file.h

@@ -40,6 +40,7 @@
 struct dma_fence;
 struct drm_file;
 struct drm_device;
+struct device;
 
 /*
  * FIXME: Not sure we want to have drm_minor here in the end, but to avoid

include/drm/drm_irq.h

@@ -24,165 +24,9 @@
 #ifndef _DRM_IRQ_H_
 #define _DRM_IRQ_H_
 
-#include <linux/seqlock.h>
-
-/**
- * struct drm_pending_vblank_event - pending vblank event tracking
- */
-struct drm_pending_vblank_event {
-	/**
-	 * @base: Base structure for tracking pending DRM events.
-	 */
-	struct drm_pending_event base;
-	/**
-	 * @pipe: drm_crtc_index() of the &drm_crtc this event is for.
-	 */
-	unsigned int pipe;
-	/**
-	 * @event: Actual event which will be sent to userspace.
-	 */
-	struct drm_event_vblank event;
-};
-
-/**
- * struct drm_vblank_crtc - vblank tracking for a CRTC
- *
- * This structure tracks the vblank state for one CRTC.
- *
- * Note that for historical reasons - the vblank handling code is still shared
- * with legacy/non-kms drivers - this is a free-standing structure not directly
- * connected to &struct drm_crtc. But all public interface functions are taking
- * a &struct drm_crtc to hide this implementation detail.
- */
-struct drm_vblank_crtc {
-	/**
-	 * @dev: Pointer to the &drm_device.
-	 */
-	struct drm_device *dev;
-	/**
-	 * @queue: Wait queue for vblank waiters.
-	 */
-	wait_queue_head_t queue;	/**< VBLANK wait queue */
-	/**
-	 * @disable_timer: Disable timer for the delayed vblank disabling
-	 * hysteresis logic. Vblank disabling is controlled through the
-	 * drm_vblank_offdelay module option and the setting of the
-	 * &drm_device.max_vblank_count value.
-	 */
-	struct timer_list disable_timer;
-
-	/**
-	 * @seqlock: Protect vblank count and time.
-	 */
-	seqlock_t seqlock;		/* protects vblank count and time */
-
-	/**
-	 * @count: Current software vblank counter.
-	 */
-	u32 count;
-	/**
-	 * @time: Vblank timestamp corresponding to @count.
-	 */
-	struct timeval time;
-
-	/**
-	 * @refcount: Number of users/waiters of the vblank interrupt. Only when
-	 * this refcount reaches 0 can the hardware interrupt be disabled using
-	 * @disable_timer.
-	 */
-	atomic_t refcount;		/* number of users of vblank interruptsper crtc */
-	/**
-	 * @last: Protected by &drm_device.vbl_lock, used for wraparound handling.
-	 */
-	u32 last;
-	/**
-	 * @inmodeset: Tracks whether the vblank is disabled due to a modeset.
-	 * For legacy driver bit 2 additionally tracks whether an additional
-	 * temporary vblank reference has been acquired to paper over the
-	 * hardware counter resetting/jumping. KMS drivers should instead just
-	 * call drm_crtc_vblank_off() and drm_crtc_vblank_on(), which explicitly
-	 * save and restore the vblank count.
-	 */
-	unsigned int inmodeset;		/* Display driver is setting mode */
-	/**
-	 * @pipe: drm_crtc_index() of the &drm_crtc corresponding to this
-	 * structure.
-	 */
-	unsigned int pipe;
-	/**
-	 * @framedur_ns: Frame/Field duration in ns, used by
-	 * drm_calc_vbltimestamp_from_scanoutpos() and computed by
-	 * drm_calc_timestamping_constants().
-	 */
-	int framedur_ns;
-	/**
-	 * @linedur_ns: Line duration in ns, used by
-	 * drm_calc_vbltimestamp_from_scanoutpos() and computed by
-	 * drm_calc_timestamping_constants().
-	 */
-	int linedur_ns;
-
-	/**
-	 * @hwmode:
-	 *
-	 * Cache of the current hardware display mode. Only valid when @enabled
-	 * is set. This is used by helpers like
-	 * drm_calc_vbltimestamp_from_scanoutpos(). We can't just access the
-	 * hardware mode by e.g. looking at &drm_crtc_state.adjusted_mode,
-	 * because that one is really hard to get from interrupt context.
-	 */
-	struct drm_display_mode hwmode;
-
-	/**
-	 * @enabled: Tracks the enabling state of the corresponding &drm_crtc to
-	 * avoid double-disabling and hence corrupting saved state. Needed by
-	 * drivers not using atomic KMS, since those might go through their CRTC
-	 * disabling functions multiple times.
-	 */
-	bool enabled;
-};
+struct drm_device;
 
 int drm_irq_install(struct drm_device *dev, int irq);
 int drm_irq_uninstall(struct drm_device *dev);
 
-int drm_vblank_init(struct drm_device *dev, unsigned int num_crtcs);
-u32 drm_crtc_vblank_count(struct drm_crtc *crtc);
-u32 drm_crtc_vblank_count_and_time(struct drm_crtc *crtc,
-				   struct timeval *vblanktime);
-void drm_crtc_send_vblank_event(struct drm_crtc *crtc,
-			       struct drm_pending_vblank_event *e);
-void drm_crtc_arm_vblank_event(struct drm_crtc *crtc,
-			      struct drm_pending_vblank_event *e);
-bool drm_handle_vblank(struct drm_device *dev, unsigned int pipe);
-bool drm_crtc_handle_vblank(struct drm_crtc *crtc);
-int drm_crtc_vblank_get(struct drm_crtc *crtc);
-void drm_crtc_vblank_put(struct drm_crtc *crtc);
-void drm_wait_one_vblank(struct drm_device *dev, unsigned int pipe);
-void drm_crtc_wait_one_vblank(struct drm_crtc *crtc);
-void drm_crtc_vblank_off(struct drm_crtc *crtc);
-void drm_crtc_vblank_reset(struct drm_crtc *crtc);
-void drm_crtc_vblank_on(struct drm_crtc *crtc);
-void drm_vblank_cleanup(struct drm_device *dev);
-u32 drm_accurate_vblank_count(struct drm_crtc *crtc);
-
-bool drm_calc_vbltimestamp_from_scanoutpos(struct drm_device *dev,
-					   unsigned int pipe, int *max_error,
-					   struct timeval *vblank_time,
-					   bool in_vblank_irq);
-void drm_calc_timestamping_constants(struct drm_crtc *crtc,
-				     const struct drm_display_mode *mode);
-
-/**
- * drm_crtc_vblank_waitqueue - get vblank waitqueue for the CRTC
- * @crtc: which CRTC's vblank waitqueue to retrieve
- *
- * This function returns a pointer to the vblank waitqueue for the CRTC.
- * Drivers can use this to implement vblank waits using wait_event() and related
- * functions.
- */
-static inline wait_queue_head_t *drm_crtc_vblank_waitqueue(struct drm_crtc *crtc)
-{
-	return &crtc->dev->vblank[drm_crtc_index(crtc)].queue;
-}
-
 #endif

include/drm/drm_modes.h

@@ -197,6 +197,8 @@ enum drm_mode_status {
  * there's the hardware timings, which are corrected for interlacing,
  * double-clocking and similar things. They are provided as a convenience, and
  * can be appropriately computed using drm_mode_set_crtcinfo().
+ *
+ * For printing you can use %DRM_MODE_FMT and DRM_MODE_ARG().
  */
 struct drm_display_mode {
 	/**
@@ -407,6 +409,21 @@ struct drm_display_mode {
 	enum hdmi_picture_aspect picture_aspect_ratio;
 };
 
+/**
+ * DRM_MODE_FMT - printf string for &struct drm_display_mode
+ */
+#define DRM_MODE_FMT    "%d:\"%s\" %d %d %d %d %d %d %d %d %d %d 0x%x 0x%x"
+
+/**
+ * DRM_MODE_ARG - printf arguments for &struct drm_display_mode
+ * @m: display mode
+ */
+#define DRM_MODE_ARG(m) \
+	(m)->base.id, (m)->name, (m)->vrefresh, (m)->clock, \
+	(m)->hdisplay, (m)->hsync_start, (m)->hsync_end, (m)->htotal, \
+	(m)->vdisplay, (m)->vsync_start, (m)->vsync_end, (m)->vtotal, \
+	(m)->type, (m)->flags
+
 #define obj_to_mode(x) container_of(x, struct drm_display_mode, base)
 
 /**

include/drm/drm_os_linux.h

@@ -6,19 +6,7 @@
 #include <linux/interrupt.h>	/* For task queue support */
 #include <linux/sched/signal.h>
 #include <linux/delay.h>
-
-#ifndef readq
-static inline u64 readq(void __iomem *reg)
-{
-	return ((u64) readl(reg)) | (((u64) readl(reg + 4UL)) << 32);
-}
-
-static inline void writeq(u64 val, void __iomem *reg)
-{
-	writel(val & 0xffffffff, reg);
-	writel(val >> 32, reg + 0x4UL);
-}
-#endif
+#include <linux/io-64-nonatomic-lo-hi.h>
 
 /** Current process ID */
 #define DRM_CURRENTPID			task_pid_nr(current)

include/drm/drm_prime.h

@@ -59,6 +59,8 @@ struct drm_device;
 struct drm_gem_object;
 struct drm_file;
 
+struct device;
+
 struct dma_buf *drm_gem_prime_export(struct drm_device *dev,
 				     struct drm_gem_object *obj,
 				     int flags);

include/drm/drm_rect.h

@@ -42,6 +42,33 @@ struct drm_rect {
 	int x1, y1, x2, y2;
 };
 
+/**
+ * DRM_RECT_FMT - printf string for &struct drm_rect
+ */
+#define DRM_RECT_FMT    "%dx%d%+d%+d"
+/**
+ * DRM_RECT_ARG - printf arguments for &struct drm_rect
+ * @r: rectangle struct
+ */
+#define DRM_RECT_ARG(r) drm_rect_width(r), drm_rect_height(r), (r)->x1, (r)->y1
+
+/**
+ * DRM_RECT_FP_FMT - printf string for &struct drm_rect in 16.16 fixed point
+ */
+#define DRM_RECT_FP_FMT "%d.%06ux%d.%06u%+d.%06u%+d.%06u"
+/**
+ * DRM_RECT_FP_ARG - printf arguments for &struct drm_rect in 16.16 fixed point
+ * @r: rectangle struct
+ *
+ * This is useful for e.g. printing plane source rectangles, which are in 16.16
+ * fixed point.
+ */
+#define DRM_RECT_FP_ARG(r) \
+		drm_rect_width(r) >> 16, ((drm_rect_width(r) & 0xffff) * 15625) >> 10, \
+		drm_rect_height(r) >> 16, ((drm_rect_height(r) & 0xffff) * 15625) >> 10, \
+		(r)->x1 >> 16, (((r)->x1 & 0xffff) * 15625) >> 10, \
+		(r)->y1 >> 16, (((r)->y1 & 0xffff) * 15625) >> 10
+
 /**
  * drm_rect_adjust_size - adjust the size of the rectangle
  * @r: rectangle to be adjusted

include/drm/drm_vblank.h

+/*
+ * Copyright 2016 Intel Corp.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * VA LINUX SYSTEMS AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#ifndef _DRM_VBLANK_H_
+#define _DRM_VBLANK_H_
+
+#include <linux/seqlock.h>
+#include <linux/idr.h>
+#include <linux/poll.h>
+
+#include <drm/drm_file.h>
+#include <drm/drm_modes.h>
+#include <uapi/drm/drm.h>
+
+struct drm_device;
+struct drm_crtc;
+
+/**
+ * struct drm_pending_vblank_event - pending vblank event tracking
+ */
+struct drm_pending_vblank_event {
+	/**
+	 * @base: Base structure for tracking pending DRM events.
+	 */
+	struct drm_pending_event base;
+	/**
+	 * @pipe: drm_crtc_index() of the &drm_crtc this event is for.
+	 */
+	unsigned int pipe;
+	/**
+	 * @event: Actual event which will be sent to userspace.
+	 */
+	struct drm_event_vblank event;
+};
+
+/**
+ * struct drm_vblank_crtc - vblank tracking for a CRTC
+ *
+ * This structure tracks the vblank state for one CRTC.
+ *
+ * Note that for historical reasons - the vblank handling code is still shared
+ * with legacy/non-kms drivers - this is a free-standing structure not directly
+ * connected to &struct drm_crtc. But all public interface functions are taking
+ * a &struct drm_crtc to hide this implementation detail.
+ */
+struct drm_vblank_crtc {
+	/**
+	 * @dev: Pointer to the &drm_device.
+	 */
+	struct drm_device *dev;
+	/**
+	 * @queue: Wait queue for vblank waiters.
+	 */
+	wait_queue_head_t queue;	/**< VBLANK wait queue */
+	/**
+	 * @disable_timer: Disable timer for the delayed vblank disabling
+	 * hysteresis logic. Vblank disabling is controlled through the
+	 * drm_vblank_offdelay module option and the setting of the
+	 * &drm_device.max_vblank_count value.
+	 */
+	struct timer_list disable_timer;
+
+	/**
+	 * @seqlock: Protect vblank count and time.
+	 */
+	seqlock_t seqlock;		/* protects vblank count and time */
+
+	/**
+	 * @count: Current software vblank counter.
+	 */
+	u32 count;
+	/**
+	 * @time: Vblank timestamp corresponding to @count.
+	 */
+	struct timeval time;
+
+	/**
+	 * @refcount: Number of users/waiters of the vblank interrupt. Only when
+	 * this refcount reaches 0 can the hardware interrupt be disabled using
+	 * @disable_timer.
+	 */
+	atomic_t refcount;		/* number of users of vblank interruptsper crtc */
+	/**
+	 * @last: Protected by &drm_device.vbl_lock, used for wraparound handling.
+	 */
+	u32 last;
+	/**
+	 * @inmodeset: Tracks whether the vblank is disabled due to a modeset.
+	 * For legacy driver bit 2 additionally tracks whether an additional
+	 * temporary vblank reference has been acquired to paper over the
+	 * hardware counter resetting/jumping. KMS drivers should instead just
+	 * call drm_crtc_vblank_off() and drm_crtc_vblank_on(), which explicitly
+	 * save and restore the vblank count.
+	 */
+	unsigned int inmodeset;		/* Display driver is setting mode */
+	/**
+	 * @pipe: drm_crtc_index() of the &drm_crtc corresponding to this
+	 * structure.
+	 */
+	unsigned int pipe;
+	/**
+	 * @framedur_ns: Frame/Field duration in ns, used by
+	 * drm_calc_vbltimestamp_from_scanoutpos() and computed by
+	 * drm_calc_timestamping_constants().
+	 */
+	int framedur_ns;
+	/**
+	 * @linedur_ns: Line duration in ns, used by
+	 * drm_calc_vbltimestamp_from_scanoutpos() and computed by
+	 * drm_calc_timestamping_constants().
+	 */
+	int linedur_ns;
+
+	/**
+	 * @hwmode:
+	 *
+	 * Cache of the current hardware display mode. Only valid when @enabled
+	 * is set. This is used by helpers like
+	 * drm_calc_vbltimestamp_from_scanoutpos(). We can't just access the
+	 * hardware mode by e.g. looking at &drm_crtc_state.adjusted_mode,
+	 * because that one is really hard to get from interrupt context.
+	 */
+	struct drm_display_mode hwmode;
+
+	/**
+	 * @enabled: Tracks the enabling state of the corresponding &drm_crtc to
+	 * avoid double-disabling and hence corrupting saved state. Needed by
+	 * drivers not using atomic KMS, since those might go through their CRTC
+	 * disabling functions multiple times.
+	 */
+	bool enabled;
+};
+
+int drm_vblank_init(struct drm_device *dev, unsigned int num_crtcs);
+u32 drm_crtc_vblank_count(struct drm_crtc *crtc);
+u32 drm_crtc_vblank_count_and_time(struct drm_crtc *crtc,
+				   struct timeval *vblanktime);
+void drm_crtc_send_vblank_event(struct drm_crtc *crtc,
+			       struct drm_pending_vblank_event *e);
+void drm_crtc_arm_vblank_event(struct drm_crtc *crtc,
+			      struct drm_pending_vblank_event *e);
+bool drm_handle_vblank(struct drm_device *dev, unsigned int pipe);
+bool drm_crtc_handle_vblank(struct drm_crtc *crtc);
+int drm_crtc_vblank_get(struct drm_crtc *crtc);
+void drm_crtc_vblank_put(struct drm_crtc *crtc);
+void drm_wait_one_vblank(struct drm_device *dev, unsigned int pipe);
+void drm_crtc_wait_one_vblank(struct drm_crtc *crtc);
+void drm_crtc_vblank_off(struct drm_crtc *crtc);
+void drm_crtc_vblank_reset(struct drm_crtc *crtc);
+void drm_crtc_vblank_on(struct drm_crtc *crtc);
+void drm_vblank_cleanup(struct drm_device *dev);
+u32 drm_accurate_vblank_count(struct drm_crtc *crtc);
+
+bool drm_calc_vbltimestamp_from_scanoutpos(struct drm_device *dev,
+					   unsigned int pipe, int *max_error,
+					   struct timeval *vblank_time,
+					   bool in_vblank_irq);
+void drm_calc_timestamping_constants(struct drm_crtc *crtc,
+				     const struct drm_display_mode *mode);
+wait_queue_head_t *drm_crtc_vblank_waitqueue(struct drm_crtc *crtc);
+#endif