ARM: dts: Add CPU cooling binding for exynos3250 boards

This patch add the cooling device to control the overheating issue on
Exynos3250-based Rinato/Monk board.
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>

arch/arm/boot/dts/exynos3250-monk.dts

@@ -116,6 +116,21 @@ haptics {
 		min-microvolt = <1100000>;
 		max-microvolt = <2700000>;
 	};
+
+	thermal-zones {
+		cpu_thermal: cpu-thermal {
+			cooling-maps {
+				map0 {
+					/* Correspond to 500MHz at freq_table */
+					cooling-device = <&cpu0 5 5>;
+				};
+				map1 {
+					/* Correspond to 200MHz at freq_table */
+					cooling-device = <&cpu0 8 8>;
+				};
+			};
+		};
+	};
 };
 
 &adc {

arch/arm/boot/dts/exynos3250-rinato.dts

@@ -107,6 +107,21 @@ haptics {
 		min-microvolt = <1100000>;
 		max-microvolt = <2700000>;
 	};
+
+	thermal-zones {
+		cpu_thermal: cpu-thermal {
+			cooling-maps {
+				map0 {
+					/* Corresponds to 500MHz */
+					cooling-device = <&cpu0 5 5>;
+				};
+				map1 {
+					/* Corresponds to 200MHz */
+					cooling-device = <&cpu0 8 8>;
+				};
+			};
+		};
+	};
 };
 
 &adc {

arch/arm/boot/dts/exynos3250.dtsi

@@ -55,6 +55,7 @@ cpu0: cpu@0 {
 			clock-frequency = <1000000000>;
 			clocks = <&cmu CLK_ARM_CLK>;
 			clock-names = "cpu";
+			#cooling-cells = <2>;
 
 			operating-points = <
 				1000000 1150000