sched/idle/x86: Restore mwait_idle() to fix boot hangs, to improve power...

sched/idle/x86: Restore mwait_idle() to fix boot hangs, to improve power savings and to improve performance

[ Upstream commit b253149b ]

In Linux-3.9 we removed the mwait_idle() loop:

  69fb3676 ("x86 idle: remove mwait_idle() and "idle=mwait" cmdline param")

The reasoning was that modern machines should be sufficiently
happy during the boot process using the default_idle() HALT
loop, until cpuidle loads and either acpi_idle or intel_idle
invoke the newer MWAIT-with-hints idle loop.

But two machines reported problems:

 1. Certain Core2-era machines support MWAIT-C1 and HALT only.
    MWAIT-C1 is preferred for optimal power and performance.
    But if they support just C1, cpuidle never loads and
    so they use the boot-time default idle loop forever.

 2. Some laptops will boot-hang if HALT is used,
    but will boot successfully if MWAIT is used.
    This appears to be a hidden assumption in BIOS SMI,
    that is presumably valid on the proprietary OS
    where the BIOS was validated.

       https://bugzilla.kernel.org/show_bug.cgi?id=60770

So here we effectively revert the patch above, restoring
the mwait_idle() loop.  However, we don't bother restoring
the idle=mwait cmdline parameter, since it appears to add
no value.

Maintainer notes:

  For 3.9, simply revert 69fb3676
  for 3.10, patch -F3 applies, fuzz needed due to __cpuinit use in
  context For 3.11, 3.12, 3.13, this patch applies cleanly
Tested-by: Mike Galbraith <bitbucket@online.de>
Signed-off-by: Len Brown <len.brown@intel.com>
Acked-by: Mike Galbraith <bitbucket@online.de>
Cc: <stable@vger.kernel.org> # 3.9+
Cc: Borislav Petkov <bp@alien8.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ian Malone <ibmalone@gmail.com>
Cc: Josh Boyer <jwboyer@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/345254a551eb5a6a866e048d7ab570fd2193aca4.1389763084.git.len.brown@intel.com
[ Ported to recent kernels. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

arch/x86/include/asm/mwait.h

@@ -30,6 +30,14 @@ static inline void __mwait(unsigned long eax, unsigned long ecx)
 		     :: "a" (eax), "c" (ecx));
 }
 
+static inline void __sti_mwait(unsigned long eax, unsigned long ecx)
+{
+	trace_hardirqs_on();
+	/* "mwait %eax, %ecx;" */
+	asm volatile("sti; .byte 0x0f, 0x01, 0xc9;"
+		     :: "a" (eax), "c" (ecx));
+}
+
 /*
  * This uses new MONITOR/MWAIT instructions on P4 processors with PNI,
  * which can obviate IPI to trigger checking of need_resched.

arch/x86/kernel/process.c

@@ -24,6 +24,7 @@
 #include <asm/syscalls.h>
 #include <asm/idle.h>
 #include <asm/uaccess.h>
+#include <asm/mwait.h>
 #include <asm/i387.h>
 #include <asm/fpu-internal.h>
 #include <asm/debugreg.h>
@@ -398,6 +399,49 @@ static void amd_e400_idle(void)
 		default_idle();
 }
 
+/*
+ * Intel Core2 and older machines prefer MWAIT over HALT for C1.
+ * We can't rely on cpuidle installing MWAIT, because it will not load
+ * on systems that support only C1 -- so the boot default must be MWAIT.
+ *
+ * Some AMD machines are the opposite, they depend on using HALT.
+ *
+ * So for default C1, which is used during boot until cpuidle loads,
+ * use MWAIT-C1 on Intel HW that has it, else use HALT.
+ */
+static int prefer_mwait_c1_over_halt(const struct cpuinfo_x86 *c)
+{
+	if (c->x86_vendor != X86_VENDOR_INTEL)
+		return 0;
+
+	if (!cpu_has(c, X86_FEATURE_MWAIT))
+		return 0;
+
+	return 1;
+}
+
+/*
+ * MONITOR/MWAIT with no hints, used for default default C1 state.
+ * This invokes MWAIT with interrutps enabled and no flags,
+ * which is backwards compatible with the original MWAIT implementation.
+ */
+
+static void mwait_idle(void)
+{
+	if (!need_resched()) {
+		if (this_cpu_has(X86_BUG_CLFLUSH_MONITOR))
+			clflush((void *)&current_thread_info()->flags);
+
+		__monitor((void *)&current_thread_info()->flags, 0, 0);
+		smp_mb();
+		if (!need_resched())
+			__sti_mwait(0, 0);
+		else
+			local_irq_enable();
+	} else
+		local_irq_enable();
+}
+
 void select_idle_routine(const struct cpuinfo_x86 *c)
 {
 #ifdef CONFIG_SMP
@@ -411,6 +455,9 @@ void select_idle_routine(const struct cpuinfo_x86 *c)
 		/* E400: APIC timer interrupt does not wake up CPU from C1e */
 		pr_info("using AMD E400 aware idle routine\n");
 		x86_idle = amd_e400_idle;
+	} else if (prefer_mwait_c1_over_halt(c)) {
+		pr_info("using mwait in idle threads\n");
+		x86_idle = mwait_idle;
 	} else
 		x86_idle = default_idle;
 }