Commit 56b78921 authored by Linus Torvalds's avatar Linus Torvalds

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: (26 commits)
  ALSA: hdmi - show debug message on changing audio infoframe
  ALSA: hdmi - merge common code for intelhdmi and nvhdmi
  ALSA: hda - Add ASRock mobo to MSI blacklist
  ALSA: hda: uninitialized variable fix
  ALSA: hda: Use LPIB for a Biostar Microtech board
  ALSA: usb/audio.h: Fix field order
  ALSA: fix jazz16 compile (udelay)
  ALSA: hda: Use LPIB for Dell Latitude 131L
  ALSA: hda - Build hda_eld into snd-hda-codec module
  ALSA: hda - Support NVIDIA MCP89 and GT21x hdmi audio
  ALSA: hda - Support max codecs to 8 for nvidia hda controller
  ALSA: riptide: clean up while loop
  ALSA: usbaudio - remove debug "SAMPLE BYTES" printk line
  ALSA: timer - pass real event in snd_timer_notify1() to instance callback
  ALSA: oxygen: change || to &&
  ALSA: opti92x: use PnP data to select Master Control port
  ASoC: fix ak4104 register array access
  ASoC: soc_pcm_open: Add missing bailout tag
  ALSA: usbaudio: Fix wrong bitrate for Creative Creative VF0470 Live Cam
  ALSA: ua101: removing debugging code
  ...
parents 3c443cbc a3087ae9
......@@ -1812,7 +1812,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
Module snd-ua101
----------------
Module for the Edirol UA-101 audio/MIDI interface.
Module for the Edirol UA-101/UA-1000 audio/MIDI interfaces.
This module supports multiple devices, autoprobe and hotplugging.
......
......@@ -269,8 +269,8 @@ struct uac_format_type_i_ext_descriptor {
__u8 bLength;
__u8 bDescriptorType;
__u8 bDescriptorSubtype;
__u8 bSubslotSize;
__u8 bFormatType;
__u8 bSubslotSize;
__u8 bBitResolution;
__u8 bHeaderLength;
__u8 bControlSize;
......
......@@ -544,7 +544,7 @@ struct snd_rawmidi_status {
* Timer section - /dev/snd/timer
*/
#define SNDRV_TIMER_VERSION SNDRV_PROTOCOL_VERSION(2, 0, 5)
#define SNDRV_TIMER_VERSION SNDRV_PROTOCOL_VERSION(2, 0, 6)
enum {
SNDRV_TIMER_CLASS_NONE = -1,
......
......@@ -393,7 +393,7 @@ static void snd_timer_notify1(struct snd_timer_instance *ti, int event)
event == SNDRV_TIMER_EVENT_CONTINUE)
resolution = snd_timer_resolution(ti);
if (ti->ccallback)
ti->ccallback(ti, SNDRV_TIMER_EVENT_START, &tstamp, resolution);
ti->ccallback(ti, event, &tstamp, resolution);
if (ti->flags & SNDRV_TIMER_IFLG_SLAVE)
return;
timer = ti->timer;
......
......@@ -1558,7 +1558,7 @@ static int __devinit snd_card_miro_pnp(struct snd_miro *chip,
err = pnp_activate_dev(devmc);
if (err < 0) {
snd_printk(KERN_ERR "OPL syntg pnp configure failure: %d\n",
snd_printk(KERN_ERR "MC pnp configure failure: %d\n",
err);
return err;
}
......
......@@ -144,12 +144,8 @@ struct snd_opti9xx {
spinlock_t lock;
long wss_base;
int irq;
#ifdef CONFIG_PNP
struct pnp_dev *dev;
struct pnp_dev *devmpu;
#endif /* CONFIG_PNP */
};
static int snd_opti9xx_pnp_is_probed;
......@@ -159,12 +155,17 @@ static int snd_opti9xx_pnp_is_probed;
static struct pnp_card_device_id snd_opti9xx_pnpids[] = {
#ifndef OPTi93X
/* OPTi 82C924 */
{ .id = "OPT0924", .devs = { { "OPT0000" }, { "OPT0002" } }, .driver_data = 0x0924 },
{ .id = "OPT0924",
.devs = { { "OPT0000" }, { "OPT0002" }, { "OPT0005" } },
.driver_data = 0x0924 },
/* OPTi 82C925 */
{ .id = "OPT0925", .devs = { { "OPT9250" }, { "OPT0002" } }, .driver_data = 0x0925 },
{ .id = "OPT0925",
.devs = { { "OPT9250" }, { "OPT0002" }, { "OPT0005" } },
.driver_data = 0x0925 },
#else
/* OPTi 82C931/3 */
{ .id = "OPT0931", .devs = { { "OPT9310" }, { "OPT0002" } }, .driver_data = 0x0931 },
{ .id = "OPT0931", .devs = { { "OPT9310" }, { "OPT0002" } },
.driver_data = 0x0931 },
#endif /* OPTi93X */
{ .id = "" }
};
......@@ -207,24 +208,34 @@ static int __devinit snd_opti9xx_init(struct snd_opti9xx *chip,
chip->hardware = hardware;
strcpy(chip->name, snd_opti9xx_names[hardware]);
chip->mc_base_size = opti9xx_mc_size[hardware];
spin_lock_init(&chip->lock);
chip->irq = -1;
#ifndef OPTi93X
#ifdef CONFIG_PNP
if (isapnp && chip->mc_base)
/* PnP resource gives the least 10 bits */
chip->mc_base |= 0xc00;
#endif /* CONFIG_PNP */
else {
chip->mc_base = 0xf8c;
chip->mc_base_size = opti9xx_mc_size[hardware];
}
#else
chip->mc_base_size = opti9xx_mc_size[hardware];
#endif
switch (hardware) {
#ifndef OPTi93X
case OPTi9XX_HW_82C928:
case OPTi9XX_HW_82C929:
chip->mc_base = 0xf8c;
chip->password = (hardware == OPTi9XX_HW_82C928) ? 0xe2 : 0xe3;
chip->pwd_reg = 3;
break;
case OPTi9XX_HW_82C924:
case OPTi9XX_HW_82C925:
chip->mc_base = 0xf8c;
chip->password = 0xe5;
chip->pwd_reg = 3;
break;
......@@ -292,7 +303,7 @@ static unsigned char snd_opti9xx_read(struct snd_opti9xx *chip,
spin_unlock_irqrestore(&chip->lock, flags);
return retval;
}
static void snd_opti9xx_write(struct snd_opti9xx *chip, unsigned char reg,
unsigned char value)
{
......@@ -341,7 +352,7 @@ static void snd_opti9xx_write(struct snd_opti9xx *chip, unsigned char reg,
static int __devinit snd_opti9xx_configure(struct snd_opti9xx *chip,
long wss_base,
long port,
int irq, int dma1, int dma2,
long mpu_port, int mpu_irq)
{
......@@ -354,16 +365,23 @@ static int __devinit snd_opti9xx_configure(struct snd_opti9xx *chip,
switch (chip->hardware) {
#ifndef OPTi93X
case OPTi9XX_HW_82C924:
/* opti 929 mode (?), OPL3 clock output, audio enable */
snd_opti9xx_write_mask(chip, OPTi9XX_MC_REG(4), 0xf0, 0xfc);
/* enable wave audio */
snd_opti9xx_write_mask(chip, OPTi9XX_MC_REG(6), 0x02, 0x02);
case OPTi9XX_HW_82C925:
/* enable WSS mode */
snd_opti9xx_write_mask(chip, OPTi9XX_MC_REG(1), 0x80, 0x80);
/* OPL3 FM synthesis */
snd_opti9xx_write_mask(chip, OPTi9XX_MC_REG(2), 0x00, 0x20);
/* disable Sound Blaster IRQ and DMA */
snd_opti9xx_write_mask(chip, OPTi9XX_MC_REG(3), 0xf0, 0xff);
#ifdef CS4231
/* cs4231/4248 fix enabled */
snd_opti9xx_write_mask(chip, OPTi9XX_MC_REG(5), 0x02, 0x02);
#else
/* cs4231/4248 fix disabled */
snd_opti9xx_write_mask(chip, OPTi9XX_MC_REG(5), 0x00, 0x02);
#endif /* CS4231 */
break;
......@@ -411,21 +429,26 @@ static int __devinit snd_opti9xx_configure(struct snd_opti9xx *chip,
return -EINVAL;
}
switch (wss_base) {
case 0x530:
/* PnP resource says it decodes only 10 bits of address */
switch (port & 0x3ff) {
case 0x130:
chip->wss_base = 0x530;
wss_base_bits = 0x00;
break;
case 0x604:
case 0x204:
chip->wss_base = 0x604;
wss_base_bits = 0x03;
break;
case 0xe80:
case 0x280:
chip->wss_base = 0xe80;
wss_base_bits = 0x01;
break;
case 0xf40:
case 0x340:
chip->wss_base = 0xf40;
wss_base_bits = 0x02;
break;
default:
snd_printk(KERN_WARNING "WSS port 0x%lx not valid\n", wss_base);
snd_printk(KERN_WARNING "WSS port 0x%lx not valid\n", port);
goto __skip_base;
}
snd_opti9xx_write_mask(chip, OPTi9XX_MC_REG(1), wss_base_bits << 4, 0x30);
......@@ -487,7 +510,7 @@ static int __devinit snd_opti9xx_configure(struct snd_opti9xx *chip,
#endif /* CS4231 || OPTi93X */
#ifndef OPTi93X
outb(irq_bits << 3 | dma_bits, wss_base);
outb(irq_bits << 3 | dma_bits, chip->wss_base);
#else /* OPTi93X */
snd_opti9xx_write(chip, OPTi9XX_MC_REG(3), (irq_bits << 3 | dma_bits));
#endif /* OPTi93X */
......@@ -729,15 +752,15 @@ static int __devinit snd_card_opti9xx_pnp(struct snd_opti9xx *chip,
{
struct pnp_dev *pdev;
int err;
struct pnp_dev *devmpu;
#ifndef OPTi93X
struct pnp_dev *devmc;
#endif
chip->dev = pnp_request_card_device(card, pid->devs[0].id, NULL);
if (chip->dev == NULL)
pdev = pnp_request_card_device(card, pid->devs[0].id, NULL);
if (pdev == NULL)
return -EBUSY;
chip->devmpu = pnp_request_card_device(card, pid->devs[1].id, NULL);
pdev = chip->dev;
err = pnp_activate_dev(pdev);
if (err < 0) {
snd_printk(KERN_ERR "AUDIO pnp configure failure: %d\n", err);
......@@ -750,9 +773,24 @@ static int __devinit snd_card_opti9xx_pnp(struct snd_opti9xx *chip,
chip->mc_indir_index = pnp_port_start(pdev, 3) + 2;
chip->mc_indir_size = pnp_port_len(pdev, 3) - 2;
#else
if (pid->driver_data != 0x0924)
port = pnp_port_start(pdev, 1);
devmc = pnp_request_card_device(card, pid->devs[2].id, NULL);
if (devmc == NULL)
return -EBUSY;
err = pnp_activate_dev(devmc);
if (err < 0) {
snd_printk(KERN_ERR "MC pnp configure failure: %d\n", err);
return err;
}
port = pnp_port_start(pdev, 1);
fm_port = pnp_port_start(pdev, 2) + 8;
/*
* The MC(0) is never accessed and card does not
* include it in the PnP resource range. OPTI93x include it.
*/
chip->mc_base = pnp_port_start(devmc, 0) - 1;
chip->mc_base_size = pnp_port_len(devmc, 0) + 1;
#endif /* OPTi93X */
irq = pnp_irq(pdev, 0);
dma1 = pnp_dma(pdev, 0);
......@@ -760,16 +798,16 @@ static int __devinit snd_card_opti9xx_pnp(struct snd_opti9xx *chip,
dma2 = pnp_dma(pdev, 1);
#endif /* CS4231 || OPTi93X */
pdev = chip->devmpu;
if (pdev && mpu_port > 0) {
err = pnp_activate_dev(pdev);
devmpu = pnp_request_card_device(card, pid->devs[1].id, NULL);
if (devmpu && mpu_port > 0) {
err = pnp_activate_dev(devmpu);
if (err < 0) {
snd_printk(KERN_ERR "AUDIO pnp configure failure\n");
snd_printk(KERN_ERR "MPU401 pnp configure failure\n");
mpu_port = -1;
chip->devmpu = NULL;
} else {
mpu_port = pnp_port_start(pdev, 0);
mpu_irq = pnp_irq(pdev, 0);
mpu_port = pnp_port_start(devmpu, 0);
mpu_irq = pnp_irq(devmpu, 0);
}
}
return pid->driver_data;
......@@ -824,7 +862,7 @@ static int __devinit snd_opti9xx_probe(struct snd_card *card)
if (error)
return error;
error = snd_wss_create(card, port + 4, -1, irq, dma1, xdma2,
error = snd_wss_create(card, chip->wss_base + 4, -1, irq, dma1, xdma2,
#ifdef OPTi93X
WSS_HW_OPTI93X, WSS_HWSHARE_IRQ,
#else
......@@ -865,10 +903,11 @@ static int __devinit snd_opti9xx_probe(struct snd_card *card)
sprintf(card->shortname, "OPTi %s", card->driver);
#if defined(CS4231) || defined(OPTi93X)
sprintf(card->longname, "%s, %s at 0x%lx, irq %d, dma %d&%d",
card->shortname, pcm->name, port + 4, irq, dma1, xdma2);
card->shortname, pcm->name,
chip->wss_base + 4, irq, dma1, xdma2);
#else
sprintf(card->longname, "%s, %s at 0x%lx, irq %d, dma %d",
card->shortname, pcm->name, port + 4, irq, dma1);
card->shortname, pcm->name, chip->wss_base + 4, irq, dma1);
#endif /* CS4231 || OPTi93X */
if (mpu_port <= 0 || mpu_port == SNDRV_AUTO_PORT)
......@@ -1062,9 +1101,6 @@ static int __devinit snd_opti9xx_pnp_probe(struct pnp_card_link *pcard,
snd_card_free(card);
return error;
}
if (hw <= OPTi9XX_HW_82C930)
chip->mc_base -= 0x80;
error = snd_opti9xx_read_check(chip);
if (error) {
snd_printk(KERN_ERR "OPTI chip not found\n");
......
......@@ -14,6 +14,7 @@
#include <linux/init.h>
#include <linux/module.h>
#include <linux/io.h>
#include <linux/delay.h>
#include <asm/dma.h>
#include <linux/isa.h>
#include <sound/core.h>
......
......@@ -4,7 +4,7 @@
*/
/*
* Coprocessor access types
* Coprocessor access types
*/
#define COPR_CUSTOM 0x0001 /* Custom applications */
#define COPR_MIDI 0x0002 /* MIDI (MPU-401) emulation */
......
......@@ -2,9 +2,9 @@ typedef struct vmidi_devc {
int dev;
/* State variables */
int opened;
int opened;
spinlock_t lock;
/* MIDI fields */
int my_mididev;
int pair_mididev;
......@@ -12,4 +12,3 @@ typedef struct vmidi_devc {
int intr_active;
void (*midi_input_intr) (int dev, unsigned char data);
} vmidi_devc;
......@@ -157,7 +157,7 @@ config SND_HDA_CODEC_INTELHDMI
config SND_HDA_ELD
def_bool y
depends on SND_HDA_CODEC_INTELHDMI
depends on SND_HDA_CODEC_INTELHDMI || SND_HDA_CODEC_NVHDMI
config SND_HDA_CODEC_CIRRUS
bool "Build Cirrus Logic codec support"
......
......@@ -3,7 +3,7 @@ snd-hda-intel-objs := hda_intel.o
snd-hda-codec-y := hda_codec.o
snd-hda-codec-$(CONFIG_SND_HDA_GENERIC) += hda_generic.o
snd-hda-codec-$(CONFIG_PROC_FS) += hda_proc.o
# snd-hda-codec-$(CONFIG_SND_HDA_ELD) += hda_eld.o
snd-hda-codec-$(CONFIG_SND_HDA_ELD) += hda_eld.o
snd-hda-codec-$(CONFIG_SND_HDA_HWDEP) += hda_hwdep.o
snd-hda-codec-$(CONFIG_SND_HDA_INPUT_BEEP) += hda_beep.o
......@@ -18,7 +18,7 @@ snd-hda-codec-ca0110-objs := patch_ca0110.o
snd-hda-codec-conexant-objs := patch_conexant.o
snd-hda-codec-via-objs := patch_via.o
snd-hda-codec-nvhdmi-objs := patch_nvhdmi.o
snd-hda-codec-intelhdmi-objs := patch_intelhdmi.o hda_eld.o
snd-hda-codec-intelhdmi-objs := patch_intelhdmi.o
# common driver
obj-$(CONFIG_SND_HDA_INTEL) := snd-hda-codec.o
......
......@@ -978,8 +978,9 @@ static void hda_set_power_state(struct hda_codec *codec, hda_nid_t fg,
*
* Returns 0 if successful, or a negative error code.
*/
int /*__devinit*/ snd_hda_codec_new(struct hda_bus *bus, unsigned int codec_addr,
struct hda_codec **codecp)
int /*__devinit*/ snd_hda_codec_new(struct hda_bus *bus,
unsigned int codec_addr,
struct hda_codec **codecp)
{
struct hda_codec *codec;
char component[31];
......@@ -1186,7 +1187,7 @@ EXPORT_SYMBOL_HDA(snd_hda_codec_cleanup_stream);
*/
/* FIXME: more better hash key? */
#define HDA_HASH_KEY(nid,dir,idx) (u32)((nid) + ((idx) << 16) + ((dir) << 24))
#define HDA_HASH_KEY(nid, dir, idx) (u32)((nid) + ((idx) << 16) + ((dir) << 24))
#define HDA_HASH_PINCAP_KEY(nid) (u32)((nid) + (0x02 << 24))
#define HDA_HASH_PARPCM_KEY(nid) (u32)((nid) + (0x03 << 24))
#define HDA_HASH_PARSTR_KEY(nid) (u32)((nid) + (0x04 << 24))
......@@ -1356,7 +1357,8 @@ u32 snd_hda_pin_sense(struct hda_codec *codec, hda_nid_t nid)
if (!codec->no_trigger_sense) {
pincap = snd_hda_query_pin_caps(codec, nid);
if (pincap & AC_PINCAP_TRIG_REQ) /* need trigger? */
snd_hda_codec_read(codec, nid, 0, AC_VERB_SET_PIN_SENSE, 0);
snd_hda_codec_read(codec, nid, 0,
AC_VERB_SET_PIN_SENSE, 0);
}
return snd_hda_codec_read(codec, nid, 0,
AC_VERB_GET_PIN_SENSE, 0);
......@@ -1372,8 +1374,8 @@ EXPORT_SYMBOL_HDA(snd_hda_pin_sense);
*/
int snd_hda_jack_detect(struct hda_codec *codec, hda_nid_t nid)
{
u32 sense = snd_hda_pin_sense(codec, nid);
return !!(sense & AC_PINSENSE_PRESENCE);
u32 sense = snd_hda_pin_sense(codec, nid);
return !!(sense & AC_PINSENSE_PRESENCE);
}
EXPORT_SYMBOL_HDA(snd_hda_jack_detect);
......@@ -1952,7 +1954,7 @@ int snd_hda_add_vmaster(struct hda_codec *codec, char *name,
err = snd_hda_ctl_add(codec, 0, kctl);
if (err < 0)
return err;
for (s = slaves; *s; s++) {
struct snd_kcontrol *sctl;
int i = 0;
......@@ -2439,27 +2441,27 @@ static struct snd_kcontrol_new dig_mixes[] = {
{
.access = SNDRV_CTL_ELEM_ACCESS_READ,
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
.name = SNDRV_CTL_NAME_IEC958("",PLAYBACK,CON_MASK),
.name = SNDRV_CTL_NAME_IEC958("", PLAYBACK, CON_MASK),
.info = snd_hda_spdif_mask_info,
.get = snd_hda_spdif_cmask_get,
},
{
.access = SNDRV_CTL_ELEM_ACCESS_READ,
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
.name = SNDRV_CTL_NAME_IEC958("",PLAYBACK,PRO_MASK),
.name = SNDRV_CTL_NAME_IEC958("", PLAYBACK, PRO_MASK),
.info = snd_hda_spdif_mask_info,
.get = snd_hda_spdif_pmask_get,
},
{
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
.name = SNDRV_CTL_NAME_IEC958("",PLAYBACK,DEFAULT),
.name = SNDRV_CTL_NAME_IEC958("", PLAYBACK, DEFAULT),
.info = snd_hda_spdif_mask_info,
.get = snd_hda_spdif_default_get,
.put = snd_hda_spdif_default_put,
},
{
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
.name = SNDRV_CTL_NAME_IEC958("",PLAYBACK,SWITCH),
.name = SNDRV_CTL_NAME_IEC958("", PLAYBACK, SWITCH),
.info = snd_hda_spdif_out_switch_info,
.get = snd_hda_spdif_out_switch_get,
.put = snd_hda_spdif_out_switch_put,
......@@ -2610,7 +2612,7 @@ static int snd_hda_spdif_in_status_get(struct snd_kcontrol *kcontrol,
static struct snd_kcontrol_new dig_in_ctls[] = {
{
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
.name = SNDRV_CTL_NAME_IEC958("",CAPTURE,SWITCH),
.name = SNDRV_CTL_NAME_IEC958("", CAPTURE, SWITCH),
.info = snd_hda_spdif_in_switch_info,
.get = snd_hda_spdif_in_switch_get,
.put = snd_hda_spdif_in_switch_put,
......@@ -2618,7 +2620,7 @@ static struct snd_kcontrol_new dig_in_ctls[] = {
{
.access = SNDRV_CTL_ELEM_ACCESS_READ,
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
.name = SNDRV_CTL_NAME_IEC958("",CAPTURE,DEFAULT),
.name = SNDRV_CTL_NAME_IEC958("", CAPTURE, DEFAULT),
.info = snd_hda_spdif_mask_info,
.get = snd_hda_spdif_in_status_get,
},
......@@ -2883,7 +2885,7 @@ int /*__devinit*/ snd_hda_build_controls(struct hda_bus *bus)
int err = snd_hda_codec_build_controls(codec);
if (err < 0) {
printk(KERN_ERR "hda_codec: cannot build controls"
"for #%d (error %d)\n", codec->addr, err);
"for #%d (error %d)\n", codec->addr, err);
err = snd_hda_codec_reset(codec);
if (err < 0) {
printk(KERN_ERR
......@@ -2979,8 +2981,12 @@ unsigned int snd_hda_calc_stream_format(unsigned int rate,
val |= channels - 1;
switch (snd_pcm_format_width(format)) {
case 8: val |= 0x00; break;
case 16: val |= 0x10; break;
case 8:
val |= 0x00;
break;
case 16:
val |= 0x10;
break;
case 20:
case 24:
case 32:
......@@ -3298,7 +3304,8 @@ static int get_empty_pcm_device(struct hda_bus *bus, int type)
if (!test_and_set_bit(audio_idx[type][i], bus->pcm_dev_bits))
return audio_idx[type][i];
snd_printk(KERN_WARNING "Too many %s devices\n", snd_hda_pcm_type_name[type]);
snd_printk(KERN_WARNING "Too many %s devices\n",
snd_hda_pcm_type_name[type]);
return -EAGAIN;
}
......@@ -3336,7 +3343,7 @@ int snd_hda_codec_build_pcms(struct hda_codec *codec)
err = codec->patch_ops.build_pcms(codec);
if (err < 0) {
printk(KERN_ERR "hda_codec: cannot build PCMs"
"for #%d (error %d)\n", codec->addr, err);
"for #%d (error %d)\n", codec->addr, err);
err = snd_hda_codec_reset(codec);
if (err < 0) {
printk(KERN_ERR
......@@ -3466,8 +3473,8 @@ EXPORT_SYMBOL_HDA(snd_hda_check_board_config);
/**
* snd_hda_check_board_codec_sid_config - compare the current codec
subsystem ID with the
config table
subsystem ID with the
config table
This is important for Gateway notebooks with SB450 HDA Audio
where the vendor ID of the PCI device is:
......@@ -3607,7 +3614,7 @@ void snd_hda_update_power_acct(struct hda_codec *codec)
*
* Increment the power-up counter and power up the hardware really when
* not turned on yet.
*/
*/
void snd_hda_power_up(struct hda_codec *codec)
{
struct hda_bus *bus = codec->bus;
......@@ -3636,7 +3643,7 @@ EXPORT_SYMBOL_HDA(snd_hda_power_up);
*
* Decrement the power-up counter and schedules the power-off work if
* the counter rearches to zero.
*/
*/
void snd_hda_power_down(struct hda_codec *codec)
{
--codec->power_count;
......@@ -3662,7 +3669,7 @@ EXPORT_SYMBOL_HDA(snd_hda_power_down);
*
* This function is supposed to be set or called from the check_power_status
* patch ops.
*/
*/
int snd_hda_check_amp_list_power(struct hda_codec *codec,
struct hda_loopback_check *check,
hda_nid_t nid)
......@@ -3830,7 +3837,7 @@ static void setup_dig_out_stream(struct hda_codec *codec, hda_nid_t nid,
{
/* turn off SPDIF once; otherwise the IEC958 bits won't be updated */
if (codec->spdif_status_reset && (codec->spdif_ctls & AC_DIG1_ENABLE))
set_dig_out_convert(codec, nid,
set_dig_out_convert(codec, nid,
codec->spdif_ctls & ~AC_DIG1_ENABLE & 0xff,
-1);
snd_hda_codec_setup_stream(codec, nid, stream_tag, 0, format);
......@@ -4089,13 +4096,13 @@ static int is_in_nid_list(hda_nid_t nid, hda_nid_t *list)
/*
* Sort an associated group of pins according to their sequence numbers.
*/
static void sort_pins_by_sequence(hda_nid_t * pins, short * sequences,
static void sort_pins_by_sequence(hda_nid_t *pins, short *sequences,
int num_pins)
{
int i, j;
short seq;
hda_nid_t nid;
for (i = 0; i < num_pins; i++) {
for (j = i + 1; j < num_pins; j++) {
if (sequences[i] > sequences[j]) {
......@@ -4123,7 +4130,7 @@ static void sort_pins_by_sequence(hda_nid_t * pins, short * sequences,
* is detected, one of speaker of HP pins is assigned as the primary
* output, i.e. to line_out_pins[0]. So, line_outs is always positive
* if any analog output exists.
*
*
* The analog input pins are assigned to input_pins array.
* The digital input/output pins are assigned to dig_in_pin and dig_out_pin,
* respectively.
......@@ -4186,9 +4193,9 @@ int snd_hda_parse_pin_def_config(struct hda_codec *codec,
case AC_JACK_SPEAKER:
seq = get_defcfg_sequence(def_conf);
assoc = get_defcfg_association(def_conf);
if (! assoc)
if (!assoc)
continue;
if (! assoc_speaker)
if (!assoc_speaker)
assoc_speaker = assoc;
else if (assoc_speaker != assoc)
continue;
......@@ -4286,7 +4293,7 @@ int snd_hda_parse_pin_def_config(struct hda_codec *codec,
cfg->speaker_outs);
sort_pins_by_sequence(cfg->hp_pins, sequences_hp,
cfg->hp_outs);
/* if we have only one mic, make it AUTO_PIN_MIC */
if (!cfg->input_pins[AUTO_PIN_MIC] &&
cfg->input_pins[AUTO_PIN_FRONT_MIC]) {
......@@ -4436,7 +4443,7 @@ EXPORT_SYMBOL_HDA(snd_hda_resume);
/**
* snd_array_new - get a new element from the given array
* @array: the array object
*
*
* Get a new element from the given array. If it exceeds the
* pre-allocated array size, re-allocate the array.
*
......
......@@ -331,6 +331,7 @@ int snd_hdmi_get_eld_size(struct hda_codec *codec, hda_nid_t nid)
return snd_hda_codec_read(codec, nid, 0, AC_VERB_GET_HDMI_DIP_SIZE,
AC_DIPSIZE_ELD_BUF);
}
EXPORT_SYMBOL_HDA(snd_hdmi_get_eld_size);
int snd_hdmi_get_eld(struct hdmi_eld *eld,
struct hda_codec *codec, hda_nid_t nid)
......@@ -366,6 +367,7 @@ int snd_hdmi_get_eld(struct hdmi_eld *eld,
kfree(buf);
return ret;
}
EXPORT_SYMBOL_HDA(snd_hdmi_get_eld);
static void hdmi_show_short_audio_desc(struct cea_sad *a)
{
......@@ -404,6 +406,7 @@ void snd_print_channel_allocation(int spk_alloc, char *buf, int buflen)
}
buf[j] = '\0'; /* necessary when j == 0 */
}
EXPORT_SYMBOL_HDA(snd_print_channel_allocation);
void snd_hdmi_show_eld(struct hdmi_eld *e)
{
......@@ -422,6 +425,7 @@ void snd_hdmi_show_eld(struct hdmi_eld *e)
for (i = 0; i < e->sad_count; i++)
hdmi_show_short_audio_desc(e->sad + i);
}
EXPORT_SYMBOL_HDA(snd_hdmi_show_eld);
#ifdef CONFIG_PROC_FS
......@@ -580,6 +584,7 @@ int snd_hda_eld_proc_new(struct hda_codec *codec, struct hdmi_eld *eld,
return 0;
}
EXPORT_SYMBOL_HDA(snd_hda_eld_proc_new);
void snd_hda_eld_proc_free(struct hda_codec *codec, struct hdmi_eld *eld)
{
......@@ -588,5 +593,6 @@ void snd_hda_eld_proc_free(struct hda_codec *codec, struct hdmi_eld *eld)
eld->proc_entry = NULL;
}
}
EXPORT_SYMBOL_HDA(snd_hda_eld_proc_free);
#endif /* CONFIG_PROC_FS */
......@@ -267,7 +267,8 @@ enum { SDI0, SDI1, SDI2, SDI3, SDO0, SDO1, SDO2, SDO3 };
#define RIRB_INT_MASK 0x05
/* STATESTS int mask: S3,SD2,SD1,SD0 */
#define AZX_MAX_CODECS 4
#define AZX_MAX_CODECS 8
#define AZX_DEFAULT_CODECS 4
#define STATESTS_INT_MASK ((1 << AZX_MAX_CODECS) - 1)
/* SD_CTL bits */
......@@ -1367,6 +1368,7 @@ static void azx_bus_reset(struct hda_bus *bus)
/* number of codec slots for each chipset: 0 = default slots (i.e. 4) */
static unsigned int azx_max_codecs[AZX_NUM_DRIVERS] __devinitdata = {
[AZX_DRIVER_NVIDIA] = 8,
[AZX_DRIVER_TERA] = 1,
};
......@@ -1399,7 +1401,7 @@ static int __devinit azx_codec_create(struct azx *chip, const char *model)
codecs = 0;
max_slots = azx_max_codecs[chip->driver_type];
if (!max_slots)
max_slots = AZX_MAX_CODECS;
max_slots = AZX_DEFAULT_CODECS;
/* First try to probe all given codec slots */
for (c = 0; c < max_slots; c++) {
......@@ -2263,10 +2265,12 @@ static int azx_dev_free(struct snd_device *device)
static struct snd_pci_quirk position_fix_list[] __devinitdata = {
SND_PCI_QUIRK(0x1028, 0x01cc, "Dell D820", POS_FIX_LPIB),
SND_PCI_QUIRK(0x1028, 0x01de, "Dell Precision 390", POS_FIX_LPIB),
SND_PCI_QUIRK(0x1028, 0x01f6, "Dell Latitude 131L", POS_FIX_LPIB),
SND_PCI_QUIRK(0x103c, 0x306d, "HP dv3", POS_FIX_LPIB),
SND_PCI_QUIRK(0x1106, 0x3288, "ASUS M2V-MX SE", POS_FIX_LPIB),
SND_PCI_QUIRK(0x1043, 0x813d, "ASUS P5AD2", POS_FIX_LPIB),
SND_PCI_QUIRK(0x1462, 0x1002, "MSI Wind U115", POS_FIX_LPIB),
SND_PCI_QUIRK(0x1565, 0x820f, "Biostar Microtech", POS_FIX_LPIB),
{}
};
......@@ -2354,6 +2358,7 @@ static void __devinit check_probe_mask(struct azx *chip, int dev)
static struct snd_pci_quirk msi_black_list[] __devinitdata = {
SND_PCI_QUIRK(0x1043, 0x81f2, "ASUS", 0), /* Athlon64 X2 + nvidia */
SND_PCI_QUIRK(0x1043, 0x81f6, "ASUS", 0), /* nvidia */
SND_PCI_QUIRK(0x1849, 0x0888, "ASRock", 0), /* Athlon64 X2 + nvidia */
{}
};
......
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
......@@ -4915,7 +4915,7 @@ static void fixup_automic_adc(struct hda_codec *codec)
static void fixup_single_adc(struct hda_codec *codec)
{
struct alc_spec *spec = codec->spec;
hda_nid_t pin;
hda_nid_t pin = 0;
int i;
/* search for the input pin; there must be only one */
......@@ -13561,6 +13561,8 @@ static void alc269_lifebook_unsol_event(struct hda_codec *codec,
static void alc269_quanta_fl1_setup(struct hda_codec *codec)
{
struct alc_spec *spec = codec->spec;
spec->autocfg.hp_pins[0] = 0x15;
spec->autocfg.speaker_pins[0] = 0x14;
spec->ext_mic.pin = 0x18;
spec->ext_mic.mux_idx = 0;
spec->int_mic.pin = 0x19;
......@@ -13656,6 +13658,8 @@ static void alc269_laptop_unsol_event(struct hda_codec *codec,
static void alc269_laptop_dmic_setup(struct hda_codec *codec)
{
struct alc_spec *spec = codec->spec;
spec->autocfg.hp_pins[0] = 0x15;
spec->autocfg.speaker_pins[0] = 0x14;
spec->ext_mic.pin = 0x18;
spec->ext_mic.mux_idx = 0;
spec->int_mic.pin = 0x12;
......@@ -13666,6 +13670,8 @@ static void alc269_laptop_dmic_setup(struct hda_codec *codec)
static void alc269vb_laptop_dmic_setup(struct hda_codec *codec)
{
struct alc_spec *spec = codec->spec;
spec->autocfg.hp_pins[0] = 0x15;
spec->autocfg.speaker_pins[0] = 0x14;
spec->ext_mic.pin = 0x18;
spec->ext_mic.mux_idx = 0;
spec->int_mic.pin = 0x12;
......@@ -13676,6 +13682,8 @@ static void alc269vb_laptop_dmic_setup(struct hda_codec *codec)
static void alc269_laptop_amic_setup(struct hda_codec *codec)
{
struct alc_spec *spec = codec->spec;
spec->autocfg.hp_pins[0] = 0x15;
spec->autocfg.speaker_pins[0] = 0x14;
spec->ext_mic.pin = 0x18;
spec->ext_mic.mux_idx = 0;
spec->int_mic.pin = 0x19;
......
......@@ -68,7 +68,7 @@ static void wm8776_write(struct oxygen *chip,
OXYGEN_SPI_CEN_LATCH_CLOCK_LO,
(reg << 9) | value);
if (reg < ARRAY_SIZE(data->wm8776_regs)) {
if (reg >= WM8776_HPLVOL || reg <= WM8776_DACMASTER)
if (reg >= WM8776_HPLVOL && reg <= WM8776_DACMASTER)
value &= ~WM8776_UPDATE;
data->wm8776_regs[reg] = value;
}
......
......@@ -1974,9 +1974,9 @@ snd_riptide_proc_read(struct snd_info_entry *entry,
}
snd_iprintf(buffer, "Paths:\n");
i = getpaths(cif, p);
while (i--) {
snd_iprintf(buffer, "%x->%x ", p[i - 1], p[i]);
i--;
while (i >= 2) {
i -= 2;
snd_iprintf(buffer, "%x->%x ", p[i], p[i + 1]);
}
snd_iprintf(buffer, "\n");
}
......
......@@ -90,12 +90,10 @@ static int ak4104_spi_write(struct snd_soc_codec *codec, unsigned int reg,
if (reg >= codec->reg_cache_size)
return -EINVAL;
reg &= AK4104_REG_MASK;
reg |= AK4104_WRITE;
/* only write to the hardware if value has changed */
if (cache[reg] != value) {
u8 tmp[2] = { reg, value };
u8 tmp[2] = { (reg & AK4104_REG_MASK) | AK4104_WRITE, value };
if (spi_write(spi, tmp, sizeof(tmp))) {
dev_err(&spi->dev, "SPI write failed\n");
return -EIO;
......
......@@ -427,24 +427,24 @@ static int soc_pcm_open(struct snd_pcm_substream *substream)
if (!runtime->hw.rates) {
printk(KERN_ERR "asoc: %s <-> %s No matching rates\n",
codec_dai->name, cpu_dai->name);
goto machine_err;
goto config_err;
}
if (!runtime->hw.formats) {
printk(KERN_ERR "asoc: %s <-> %s No matching formats\n",
codec_dai->name, cpu_dai->name);
goto machine_err;
goto config_err;
}
if (!runtime->hw.channels_min || !runtime->hw.channels_max) {
printk(KERN_ERR "asoc: %s <-> %s No matching channels\n",
codec_dai->name, cpu_dai->name);
goto machine_err;
goto config_err;
}
/* Symmetry only applies if we've already got an active stream. */
if (cpu_dai->active || codec_dai->active) {
ret = soc_pcm_apply_symmetry(substream);
if (ret != 0)
goto machine_err;
goto config_err;
}
pr_debug("asoc: %s <-> %s info:\n", codec_dai->name, cpu_dai->name);
......@@ -464,10 +464,14 @@ static int soc_pcm_open(struct snd_pcm_substream *substream)
mutex_unlock(&pcm_mutex);
return 0;
machine_err:
config_err:
if (machine->ops && machine->ops->shutdown)
machine->ops->shutdown(substream);
machine_err:
if (codec_dai->ops->shutdown)
codec_dai->ops->shutdown(substream, codec_dai);
codec_dai_err:
if (platform->pcm_ops->close)
platform->pcm_ops->close(substream);
......
......@@ -22,13 +22,13 @@ config SND_USB_AUDIO
will be called snd-usb-audio.
config SND_USB_UA101
tristate "Edirol UA-101 driver (EXPERIMENTAL)"
tristate "Edirol UA-101/UA-1000 driver (EXPERIMENTAL)"
depends on EXPERIMENTAL
select SND_PCM
select SND_RAWMIDI
help
Say Y here to include support for the Edirol UA-101 audio/MIDI
interface.
Say Y here to include support for the Edirol UA-101 and UA-1000
audio/MIDI interfaces.
To compile this driver as a module, choose M here: the module
will be called snd-ua101.
......
......@@ -3,6 +3,6 @@
int snd_usb_caiaq_midi_init(struct snd_usb_caiaqdev *dev);
void snd_usb_caiaq_midi_handle_input(struct snd_usb_caiaqdev *dev, int port, const char *buf, int len);
void snd_usb_caiaq_midi_output_done(struct urb* urb);
void snd_usb_caiaq_midi_output_done(struct urb *urb);
#endif /* CAIAQ_MIDI_H */
/*
* Edirol UA-101 driver
* Edirol UA-101/UA-1000 driver
* Copyright (c) Clemens Ladisch <clemens@ladisch.de>
*
* This driver is free software: you can redistribute it and/or modify
......@@ -25,13 +25,10 @@
#include <sound/pcm_params.h>
#include "usbaudio.h"
MODULE_DESCRIPTION("Edirol UA-101 driver");
MODULE_DESCRIPTION("Edirol UA-101/1000 driver");
MODULE_AUTHOR("Clemens Ladisch <clemens@ladisch.de>");
MODULE_LICENSE("GPL v2");
MODULE_SUPPORTED_DEVICE("{{Edirol,UA-101}}");
/* I use my UA-1A for testing because I don't have a UA-101 ... */
#define UA1A_HACK
MODULE_SUPPORTED_DEVICE("{{Edirol,UA-101},{Edirol,UA-1000}}");
/*
* Should not be lower than the minimum scheduling delay of the host
......@@ -132,9 +129,6 @@ struct ua101 {
dma_addr_t dma;
} buffers[MAX_MEMORY_BUFFERS];
} capture, playback;
unsigned int fps[10];
unsigned int frame_counter;
};
static DEFINE_MUTEX(devices_mutex);
......@@ -424,16 +418,6 @@ static void capture_urb_complete(struct urb *urb)
if (do_period_elapsed)
snd_pcm_period_elapsed(stream->substream);
/* for debugging: measure the sample rate relative to the USB clock */
ua->fps[ua->frame_counter++ / ua->packets_per_second] += frames;
if (ua->frame_counter >= ARRAY_SIZE(ua->fps) * ua->packets_per_second) {
printk(KERN_DEBUG "capture rate:");
for (frames = 0; frames < ARRAY_SIZE(ua->fps); ++frames)
printk(KERN_CONT " %u", ua->fps[frames]);
printk(KERN_CONT "\n");
memset(ua->fps, 0, sizeof(ua->fps));
ua->frame_counter = 0;
}
return;
stream_stopped:
......@@ -1200,13 +1184,30 @@ static int ua101_probe(struct usb_interface *interface,
.type = QUIRK_MIDI_FIXED_ENDPOINT,
.data = &midi_ep
};
static const int intf_numbers[2][3] = {
{ /* UA-101 */
[INTF_PLAYBACK] = 0,
[INTF_CAPTURE] = 1,
[INTF_MIDI] = 2,
},
{ /* UA-1000 */
[INTF_CAPTURE] = 1,
[INTF_PLAYBACK] = 2,
[INTF_MIDI] = 3,
},
};
struct snd_card *card;
struct ua101 *ua;
unsigned int card_index, i;
int is_ua1000;
const char *name;
char usb_path[32];
int err;
if (interface->altsetting->desc.bInterfaceNumber != 0)
is_ua1000 = usb_id->idProduct == 0x0044;
if (interface->altsetting->desc.bInterfaceNumber !=
intf_numbers[is_ua1000][0])
return -ENODEV;
mutex_lock(&devices_mutex);
......@@ -1239,20 +1240,13 @@ static int ua101_probe(struct usb_interface *interface,
init_waitqueue_head(&ua->rate_feedback_wait);
init_waitqueue_head(&ua->alsa_playback_wait);
#ifdef UA1A_HACK
if (ua->dev->descriptor.idProduct == cpu_to_le16(0x0018)) {
ua->intf[2] = interface;
ua->intf[0] = usb_ifnum_to_if(ua->dev, 1);
ua->intf[1] = usb_ifnum_to_if(ua->dev, 2);
usb_driver_claim_interface(&ua101_driver, ua->intf[0], ua);
usb_driver_claim_interface(&ua101_driver, ua->intf[1], ua);
} else {
#endif
ua->intf[0] = interface;
for (i = 1; i < ARRAY_SIZE(ua->intf); ++i) {
ua->intf[i] = usb_ifnum_to_if(ua->dev, i);
ua->intf[i] = usb_ifnum_to_if(ua->dev,
intf_numbers[is_ua1000][i]);
if (!ua->intf[i]) {
dev_err(&ua->dev->dev, "interface %u not found\n", i);
dev_err(&ua->dev->dev, "interface %u not found\n",
intf_numbers[is_ua1000][i]);
err = -ENXIO;
goto probe_error;
}
......@@ -1264,39 +1258,19 @@ static int ua101_probe(struct usb_interface *interface,
goto probe_error;
}
}
#ifdef UA1A_HACK
}
#endif
snd_card_set_dev(card, &interface->dev);
#ifdef UA1A_HACK
if (ua->dev->descriptor.idProduct == cpu_to_le16(0x0018)) {
ua->format_bit = SNDRV_PCM_FMTBIT_S16_LE;
ua->rate = 44100;
ua->packets_per_second = 1000;
ua->capture.channels = 2;
ua->playback.channels = 2;
ua->capture.frame_bytes = 4;
ua->playback.frame_bytes = 4;
ua->capture.usb_pipe = usb_rcvisocpipe(ua->dev, 2);
ua->playback.usb_pipe = usb_sndisocpipe(ua->dev, 1);
ua->capture.max_packet_bytes = 192;
ua->playback.max_packet_bytes = 192;
} else {
#endif
err = detect_usb_format(ua);
if (err < 0)
goto probe_error;
#ifdef UA1A_HACK
}
#endif
name = usb_id->idProduct == 0x0044 ? "UA-1000" : "UA-101";
strcpy(card->driver, "UA-101");
strcpy(card->shortname, "UA-101");
strcpy(card->shortname, name);
usb_make_path(ua->dev, usb_path, sizeof(usb_path));
snprintf(ua->card->longname, sizeof(ua->card->longname),
"EDIROL UA-101 (serial %s), %u Hz at %s, %s speed",
"EDIROL %s (serial %s), %u Hz at %s, %s speed", name,
ua->dev->serial ? ua->dev->serial : "?", ua->rate, usb_path,
ua->dev->speed == USB_SPEED_HIGH ? "high" : "full");
......@@ -1314,24 +1288,18 @@ static int ua101_probe(struct usb_interface *interface,
if (err < 0)
goto probe_error;
err = snd_pcm_new(card, "UA-101", 0, 1, 1, &ua->pcm);
err = snd_pcm_new(card, name, 0, 1, 1, &ua->pcm);
if (err < 0)
goto probe_error;
ua->pcm->private_data = ua;
strcpy(ua->pcm->name, "UA-101");
strcpy(ua->pcm->name, name);
snd_pcm_set_ops(ua->pcm, SNDRV_PCM_STREAM_PLAYBACK, &playback_pcm_ops);
snd_pcm_set_ops(ua->pcm, SNDRV_PCM_STREAM_CAPTURE, &capture_pcm_ops);
#ifdef UA1A_HACK
if (ua->dev->descriptor.idProduct != cpu_to_le16(0x0018)) {
#endif
err = snd_usbmidi_create(card, ua->intf[INTF_MIDI],
&ua->midi_list, &midi_quirk);
if (err < 0)
goto probe_error;
#ifdef UA1A_HACK
}
#endif
err = snd_card_register(card);
if (err < 0)
......@@ -1386,11 +1354,9 @@ static void ua101_disconnect(struct usb_interface *interface)
}
static struct usb_device_id ua101_ids[] = {
#ifdef UA1A_HACK
{ USB_DEVICE(0x0582, 0x0018) },
#endif
{ USB_DEVICE(0x0582, 0x007d) },
{ USB_DEVICE(0x0582, 0x008d) },
{ USB_DEVICE(0x0582, 0x0044) }, /* UA-1000 high speed */
{ USB_DEVICE(0x0582, 0x007d) }, /* UA-101 high speed */
{ USB_DEVICE(0x0582, 0x008d) }, /* UA-101 full speed */
{ }
};
MODULE_DEVICE_TABLE(usb, ua101_ids);
......
......@@ -2483,7 +2483,6 @@ static int parse_audio_format_i_type(struct snd_usb_audio *chip,
sample_width, sample_bytes);
}
/* check the format byte size */
printk(" XXXXX SAMPLE BYTES %d\n", sample_bytes);
switch (sample_bytes) {
case 1:
pcm_format = SNDRV_PCM_FORMAT_S8;
......@@ -2581,6 +2580,9 @@ static int parse_audio_format_rates_v1(struct snd_usb_audio *chip, struct audiof
chip->usb_id == USB_ID(0x0d8c, 0x0102)) &&
fp->altsetting == 5 && fp->maxpacksize == 392)
rate = 96000;
/* Creative VF0470 Live Cam reports 16 kHz instead of 8kHz */
if (rate == 16000 && chip->usb_id == USB_ID(0x041e, 0x4068))
rate = 8000;
fp->rate_table[fp->nr_rates] = rate;
if (!fp->rate_min || rate < fp->rate_min)
fp->rate_min = rate;
......@@ -3386,58 +3388,6 @@ static int create_uaxx_quirk(struct snd_usb_audio *chip,
return 0;
}
/*
* Create a stream for an Edirol UA-1000 interface.
*/
static int create_ua1000_quirk(struct snd_usb_audio *chip,
struct usb_interface *iface,
const struct snd_usb_audio_quirk *quirk)
{
static const struct audioformat ua1000_format = {
.format = SNDRV_PCM_FORMAT_S32_LE,
.fmt_type = UAC_FORMAT_TYPE_I,
.altsetting = 1,
.altset_idx = 1,
.attributes = 0,
.rates = SNDRV_PCM_RATE_CONTINUOUS,
};
struct usb_host_interface *alts;
struct usb_interface_descriptor *altsd;
struct audioformat *fp;
int stream, err;
if (iface->num_altsetting != 2)
return -ENXIO;
alts = &iface->altsetting[1];
altsd = get_iface_desc(alts);
if (alts->extralen != 11 || alts->extra[1] != USB_DT_CS_INTERFACE ||
altsd->bNumEndpoints != 1)
return -ENXIO;
fp = kmemdup(&ua1000_format, sizeof(*fp), GFP_KERNEL);
if (!fp)
return -ENOMEM;
fp->channels = alts->extra[4];
fp->iface = altsd->bInterfaceNumber;
fp->endpoint = get_endpoint(alts, 0)->bEndpointAddress;
fp->ep_attr = get_endpoint(alts, 0)->bmAttributes;
fp->datainterval = parse_datainterval(chip, alts);
fp->maxpacksize = le16_to_cpu(get_endpoint(alts, 0)->wMaxPacketSize);
fp->rate_max = fp->rate_min = combine_triple(&alts->extra[8]);
stream = (fp->endpoint & USB_DIR_IN)
? SNDRV_PCM_STREAM_CAPTURE : SNDRV_PCM_STREAM_PLAYBACK;
err = add_audio_endpoint(chip, stream, fp);
if (err < 0) {
kfree(fp);
return err;
}
/* FIXME: playback must be synchronized to capture */
usb_set_interface(chip->dev, fp->iface, 0);
return 0;
}
static int snd_usb_create_quirk(struct snd_usb_audio *chip,
struct usb_interface *iface,
const struct snd_usb_audio_quirk *quirk);
......@@ -3686,7 +3636,6 @@ static int snd_usb_create_quirk(struct snd_usb_audio *chip,
[QUIRK_MIDI_CME] = create_any_midi_quirk,
[QUIRK_AUDIO_STANDARD_INTERFACE] = create_standard_audio_quirk,
[QUIRK_AUDIO_FIXED_ENDPOINT] = create_fixed_stream_quirk,
[QUIRK_AUDIO_EDIROL_UA1000] = create_ua1000_quirk,
[QUIRK_AUDIO_EDIROL_UAXX] = create_uaxx_quirk,
[QUIRK_AUDIO_ALIGN_TRANSFER] = create_align_transfer_quirk
};
......
......@@ -75,7 +75,6 @@ enum quirk_type {
QUIRK_MIDI_US122L,
QUIRK_AUDIO_STANDARD_INTERFACE,
QUIRK_AUDIO_FIXED_ENDPOINT,
QUIRK_AUDIO_EDIROL_UA1000,
QUIRK_AUDIO_EDIROL_UAXX,
QUIRK_AUDIO_ALIGN_TRANSFER,
......@@ -112,7 +111,7 @@ struct snd_usb_midi_endpoint_info {
/* for QUIRK_AUDIO/MIDI_STANDARD_INTERFACE, data is NULL */
/* for QUIRK_AUDIO_EDIROL_UA700_UA25/UA1000, data is NULL */
/* for QUIRK_AUDIO_EDIROL_UAXX, data is NULL */
/* for QUIRK_IGNORE_INTERFACE, data is NULL */
......
......@@ -1015,36 +1015,6 @@ YAMAHA_DEVICE(0x7010, "UB99"),
}
}
},
{
USB_DEVICE(0x0582, 0x0044),
.driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) {
.vendor_name = "Roland",
.product_name = "UA-1000",
.ifnum = QUIRK_ANY_INTERFACE,
.type = QUIRK_COMPOSITE,
.data = (const struct snd_usb_audio_quirk[]) {
{
.ifnum = 1,
.type = QUIRK_AUDIO_EDIROL_UA1000
},
{
.ifnum = 2,
.type = QUIRK_AUDIO_EDIROL_UA1000
},
{
.ifnum = 3,
.type = QUIRK_MIDI_FIXED_ENDPOINT,
.data = & (const struct snd_usb_midi_endpoint_info) {
.out_cables = 0x0003,
.in_cables = 0x0003
}
},
{
.ifnum = -1
}
}
}
},
{
/* has ID 0x0049 when not in "Advanced Driver" mode */
USB_DEVICE(0x0582, 0x0047),
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment