Merge branch 'tty-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6

* 'tty-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6: (36 commits)
  serial: apbuart: Fixup apbuart_console_init()
  TTY: Add tty ioctl to figure device node of the system console.
  tty: add 'active' sysfs attribute to tty0 and console device
  drivers: serial: apbuart: Handle OF failures gracefully
  Serial: Avoid unbalanced IRQ wake disable during resume
  tty: fix typos/errors in tty_driver.h comments
  pch_uart : fix warnings for 64bit compile
  8250: fix uninitialized FIFOs
  ip2: fix compiler warning on ip2main_pci_tbl
  specialix: fix compiler warning on specialix_pci_tbl
  rocket: fix compiler warning on rocket_pci_ids
  8250: add a UPIO_DWAPB32 for 32 bit accesses
  8250: use container_of() instead of casting
  serial: omap-serial: Add support for kernel debugger
  serial: fix pch_uart kconfig & build
  drivers: char: hvc: add arm JTAG DCC console support
  RS485 documentation: add 16C950 UART description
  serial: ifx6x60: fix memory leak
  serial: ifx6x60: free IRQ on error
  Serial: EG20T: add PCH_UART driver
  ...

Fixed up conflicts in drivers/serial/apbuart.c with evil merge that
makes the code look fairly sane (unlike either side).

Documentation/ABI/testing/sysfs-tty

+What:		/sys/class/tty/console/active
+Date:		Nov 2010
+Contact:	Kay Sievers <kay.sievers@vrfy.org>
+Description:
+		 Shows the list of currently configured
+		 console devices, like 'tty1 ttyS0'.
+		 The last entry in the file is the active
+		 device connected to /dev/console.
+		 The file supports poll() to detect virtual
+		 console switches.
+
+What:		/sys/class/tty/tty0/active
+Date:		Nov 2010
+Contact:	Kay Sievers <kay.sievers@vrfy.org>
+Description:
+		 Shows the currently active virtual console
+		 device, like 'tty1'.
+		 The file supports poll() to detect virtual
+		 console switches.

Documentation/filesystems/proc.txt

@@ -1181,6 +1181,30 @@ Table 1-12: Files in /proc/fs/ext4/<devname>
  mb_groups       details of multiblock allocator buddy cache of free blocks
 ..............................................................................
 
+2.0 /proc/consoles
+------------------
+Shows registered system console lines.
+
+To see which character device lines are currently used for the system console
+/dev/console, you may simply look into the file /proc/consoles:
+
+  > cat /proc/consoles
+  tty0                 -WU (ECp)       4:7
+  ttyS0                -W- (Ep)        4:64
+
+The columns are:
+
+  device               name of the device
+  operations           R = can do read operations
+                       W = can do write operations
+                       U = can do unblank
+  flags                E = it is enabled
+                       C = it is prefered console
+                       B = it is primary boot console
+                       p = it is used for printk buffer
+                       b = it is not a TTY but a Braille device
+                       a = it is safe to use when cpu is offline
+  major:minor          major and minor number of the device separated by a colon
 
 ------------------------------------------------------------------------------
 Summary

Documentation/serial/00-INDEX

@@ -14,6 +14,8 @@ riscom8.txt
 	- notes on using the RISCom/8 multi-port serial driver.
 rocket.txt
 	- info on the Comtrol RocketPort multiport serial driver.
+serial-rs485.txt
+	- info about RS485 structures and support in the kernel.
 specialix.txt
 	- info on hardware/driver for specialix IO8+ multiport serial card.
 stallion.txt

Documentation/serial/serial-rs485.txt

+                        RS485 SERIAL COMMUNICATIONS
+
+1. INTRODUCTION
+
+   EIA-485, also known as TIA/EIA-485 or RS-485, is a standard defining the
+   electrical characteristics of drivers and receivers for use in balanced
+   digital multipoint systems.
+   This standard is widely used for communications in industrial automation
+   because it can be used effectively over long distances and in electrically
+   noisy environments.
+
+2. HARDWARE-RELATED CONSIDERATIONS
+
+   Some CPUs/UARTs (e.g., Atmel AT91 or 16C950 UART) contain a built-in
+   half-duplex mode capable of automatically controlling line direction by
+   toggling RTS or DTR signals. That can be used to control external
+   half-duplex hardware like an RS485 transceiver or any RS232-connected
+   half-duplex devices like some modems.
+
+   For these microcontrollers, the Linux driver should be made capable of
+   working in both modes, and proper ioctls (see later) should be made
+   available at user-level to allow switching from one mode to the other, and
+   vice versa.
+
+3. DATA STRUCTURES ALREADY AVAILABLE IN THE KERNEL
+
+   The Linux kernel provides the serial_rs485 structure (see [1]) to handle
+   RS485 communications. This data structure is used to set and configure RS485
+   parameters in the platform data and in ioctls.
+
+   Any driver for devices capable of working both as RS232 and RS485 should
+   provide at least the following ioctls:
+
+    - TIOCSRS485 (typically associated with number 0x542F). This ioctl is used
+      to enable/disable RS485 mode from user-space
+
+    - TIOCGRS485 (typically associated with number 0x542E). This ioctl is used
+      to get RS485 mode from kernel-space (i.e., driver) to user-space.
+
+   In other words, the serial driver should contain a code similar to the next
+   one:
+
+	static struct uart_ops atmel_pops = {
+		/* ... */
+		.ioctl		= handle_ioctl,
+	};
+
+	static int handle_ioctl(struct uart_port *port,
+		unsigned int cmd,
+		unsigned long arg)
+	{
+		struct serial_rs485 rs485conf;
+
+		switch (cmd) {
+		case TIOCSRS485:
+			if (copy_from_user(&rs485conf,
+				(struct serial_rs485 *) arg,
+				sizeof(rs485conf)))
+					return -EFAULT;
+
+			/* ... */
+			break;
+
+		case TIOCGRS485:
+			if (copy_to_user((struct serial_rs485 *) arg,
+				...,
+				sizeof(rs485conf)))
+					return -EFAULT;
+			/* ... */
+			break;
+
+		/* ... */
+		}
+	}
+
+
+4. USAGE FROM USER-LEVEL
+
+   From user-level, RS485 configuration can be get/set using the previous
+   ioctls. For instance, to set RS485 you can use the following code:
+
+	#include <linux/serial.h>
+
+	/* Driver-specific ioctls: */
+	#define TIOCGRS485      0x542E
+	#define TIOCSRS485      0x542F
+
+	/* Open your specific device (e.g., /dev/mydevice): */
+	int fd = open ("/dev/mydevice", O_RDWR);
+	if (fd < 0) {
+		/* Error handling. See errno. */
+	}
+
+	struct serial_rs485 rs485conf;
+
+	/* Set RS485 mode: */
+	rs485conf.flags |= SER_RS485_ENABLED;
+
+	/* Set rts delay before send, if needed: */
+	rs485conf.flags |= SER_RS485_RTS_BEFORE_SEND;
+	rs485conf.delay_rts_before_send = ...;
+
+	/* Set rts delay after send, if needed: */
+	rs485conf.flags |= SER_RS485_RTS_AFTER_SEND;
+	rs485conf.delay_rts_after_send = ...;
+
+	if (ioctl (fd, TIOCSRS485, &rs485conf) < 0) {
+		/* Error handling. See errno. */
+	}
+
+	/* Use read() and write() syscalls here... */
+
+	/* Close the device when finished: */
+	if (close (fd) < 0) {
+		/* Error handling. See errno. */
+	}
+
+5. REFERENCES
+
+ [1]	include/linux/serial.h

arch/alpha/include/asm/ioctls.h

@@ -92,6 +92,7 @@
 #define TIOCGSID	0x5429  /* Return the session ID of FD */
 #define TIOCGPTN	_IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
 #define TIOCSPTLCK	_IOW('T',0x31, int)  /* Lock/unlock Pty */
+#define TIOCGDEV	_IOR('T',0x32, unsigned int) /* Get primary device node of /dev/console */
 #define TIOCSIG		_IOW('T',0x36, int)  /* Generate signal on Pty slave */
 
 #define TIOCSERCONFIG	0x5453

arch/mips/include/asm/ioctls.h

@@ -83,6 +83,7 @@
 #define TCSETSF2	_IOW('T', 0x2D, struct termios2)
 #define TIOCGPTN	_IOR('T', 0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
 #define TIOCSPTLCK	_IOW('T', 0x31, int)  /* Lock/unlock Pty */
+#define TIOCGDEV	_IOR('T', 0x32, unsigned int) /* Get primary device node of /dev/console */
 #define TIOCSIG		_IOW('T', 0x36, int)  /* Generate signal on Pty slave */
 
 /* I hope the range from 0x5480 on is free ... */

arch/parisc/include/asm/ioctls.h

@@ -52,6 +52,7 @@
 #define TCSETSF2	_IOW('T',0x2D, struct termios2)
 #define TIOCGPTN	_IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
 #define TIOCSPTLCK	_IOW('T',0x31, int)  /* Lock/unlock Pty */
+#define TIOCGDEV	_IOR('T',0x32, int)  /* Get primary device node of /dev/console */
 #define TIOCSIG		_IOW('T',0x36, int)  /* Generate signal on Pty slave */
 
 #define FIONCLEX	0x5450  /* these numbers need to be adjusted. */

arch/parisc/kernel/pdc_cons.c

@@ -92,8 +92,6 @@ static int pdc_console_setup(struct console *co, char *options)
 
 static struct timer_list pdc_console_timer;
 
-extern struct console * console_drivers;
-
 static int pdc_console_tty_open(struct tty_struct *tty, struct file *filp)
 {
 
@@ -169,11 +167,13 @@ static int __init pdc_console_tty_driver_init(void)
 	 * It is unregistered if the pdc console was not selected as the
 	 * primary console. */
 
-	struct console *tmp = console_drivers;
+	struct console *tmp;
 
-	for (tmp = console_drivers; tmp; tmp = tmp->next)
+	acquire_console_sem();
+	for_each_console(tmp)
 		if (tmp == &pdc_cons)
 			break;
+	release_console_sem();
 
 	if (!tmp) {
 		printk(KERN_INFO "PDC console driver not registered anymore, not creating %s\n", pdc_cons.name);

arch/powerpc/include/asm/ioctls.h

@@ -94,6 +94,7 @@
 #define TIOCSRS485	0x542f
 #define TIOCGPTN	_IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
 #define TIOCSPTLCK	_IOW('T',0x31, int)  /* Lock/unlock Pty */
+#define TIOCGDEV	_IOR('T',0x32, unsigned int) /* Get primary device node of /dev/console */
 #define TIOCSIG		_IOW('T',0x36, int)  /* Generate signal on Pty slave */
 
 #define TIOCSERCONFIG	0x5453

arch/sh/include/asm/ioctls.h

@@ -85,6 +85,7 @@
 #define TCSETSF2	_IOW('T', 45, struct termios2)
 #define TIOCGPTN	_IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
 #define TIOCSPTLCK	_IOW('T',0x31, int)  /* Lock/unlock Pty */
+#define TIOCGDEV	_IOR('T',0x32, unsigned int) /* Get primary device node of /dev/console */
 #define TIOCSIG		_IOW('T',0x36, int)  /* Generate signal on Pty slave */
 
 #define TIOCSERCONFIG	_IO('T', 83) /* 0x5453 */

arch/sparc/include/asm/ioctls.h

@@ -19,6 +19,7 @@
 #define TCSETS2		_IOW('T', 13, struct termios2)
 #define TCSETSW2	_IOW('T', 14, struct termios2)
 #define TCSETSF2	_IOW('T', 15, struct termios2)
+#define TIOCGDEV	_IOR('T',0x32, unsigned int) /* Get primary device node of /dev/console */
 
 /* Note that all the ioctls that are not available in Linux have a 
  * double underscore on the front to: a) avoid some programs to

arch/xtensa/include/asm/ioctls.h

@@ -98,6 +98,7 @@
 #define TCSETSF2	_IOW('T', 45, struct termios2)
 #define TIOCGPTN	_IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
 #define TIOCSPTLCK	_IOW('T',0x31, int)  /* Lock/unlock Pty */
+#define TIOCGDEV	_IOR('T',0x32, unsigned int) /* Get primary device node of /dev/console */
 #define TIOCSIG		_IOW('T',0x36, int)  /* Generate signal on Pty slave */
 
 #define TIOCSERCONFIG	_IO('T', 83)

drivers/char/Kconfig

@@ -682,6 +682,15 @@ config HVC_UDBG
        select HVC_DRIVER
        default n
 
+config HVC_DCC
+       bool "ARM JTAG DCC console"
+       depends on ARM
+       select HVC_DRIVER
+       help
+         This console uses the JTAG DCC on ARM to create a console under the HVC
+	 driver. This console is used through a JTAG only on ARM. If you don't have
+	 a JTAG then you probably don't want this option.
+
 config VIRTIO_CONSOLE
 	tristate "Virtio console"
 	depends on VIRTIO

drivers/char/Makefile

@@ -34,6 +34,7 @@ obj-$(CONFIG_HVC_CONSOLE)	+= hvc_vio.o hvsi.o
 obj-$(CONFIG_HVC_ISERIES)	+= hvc_iseries.o
 obj-$(CONFIG_HVC_RTAS)		+= hvc_rtas.o
 obj-$(CONFIG_HVC_TILE)		+= hvc_tile.o
+obj-$(CONFIG_HVC_DCC)		+= hvc_dcc.o
 obj-$(CONFIG_HVC_BEAT)		+= hvc_beat.o
 obj-$(CONFIG_HVC_DRIVER)	+= hvc_console.o
 obj-$(CONFIG_HVC_IRQ)		+= hvc_irq.o

drivers/char/hvc_dcc.c

+/* Copyright (c) 2010, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include <linux/console.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/moduleparam.h>
+#include <linux/types.h>
+
+#include <asm/processor.h>
+
+#include "hvc_console.h"
+
+/* DCC Status Bits */
+#define DCC_STATUS_RX		(1 << 30)
+#define DCC_STATUS_TX		(1 << 29)
+
+static inline u32 __dcc_getstatus(void)
+{
+	u32 __ret;
+
+	asm("mrc p14, 0, %0, c0, c1, 0	@ read comms ctrl reg"
+		: "=r" (__ret) : : "cc");
+
+	return __ret;
+}
+
+
+#if defined(CONFIG_CPU_V7)
+static inline char __dcc_getchar(void)
+{
+	char __c;
+
+	asm("get_wait:	mrc p14, 0, pc, c0, c1, 0                          \n\
+			bne get_wait                                       \n\
+			mrc p14, 0, %0, c0, c5, 0	@ read comms data reg"
+		: "=r" (__c) : : "cc");
+
+	return __c;
+}
+#else
+static inline char __dcc_getchar(void)
+{
+	char __c;
+
+	asm("mrc p14, 0, %0, c0, c5, 0	@ read comms data reg"
+		: "=r" (__c));
+
+	return __c;
+}
+#endif
+
+#if defined(CONFIG_CPU_V7)
+static inline void __dcc_putchar(char c)
+{
+	asm("put_wait:	mrc p14, 0, pc, c0, c1, 0                 \n\
+			bcs put_wait                              \n\
+			mcr p14, 0, %0, c0, c5, 0                   "
+	: : "r" (c) : "cc");
+}
+#else
+static inline void __dcc_putchar(char c)
+{
+	asm("mcr p14, 0, %0, c0, c5, 0	@ write a char"
+		: /* no output register */
+		: "r" (c));
+}
+#endif
+
+static int hvc_dcc_put_chars(uint32_t vt, const char *buf, int count)
+{
+	int i;
+
+	for (i = 0; i < count; i++) {
+		while (__dcc_getstatus() & DCC_STATUS_TX)
+			cpu_relax();
+
+		__dcc_putchar((char)(buf[i] & 0xFF));
+	}
+
+	return count;
+}
+
+static int hvc_dcc_get_chars(uint32_t vt, char *buf, int count)
+{
+	int i;
+
+	for (i = 0; i < count; ++i) {
+		int c = -1;
+
+		if (__dcc_getstatus() & DCC_STATUS_RX)
+			c = __dcc_getchar();
+		if (c < 0)
+			break;
+		buf[i] = c;
+	}
+
+	return i;
+}
+
+static const struct hv_ops hvc_dcc_get_put_ops = {
+	.get_chars = hvc_dcc_get_chars,
+	.put_chars = hvc_dcc_put_chars,
+};
+
+static int __init hvc_dcc_console_init(void)
+{
+	hvc_instantiate(0, 0, &hvc_dcc_get_put_ops);
+	return 0;
+}
+console_initcall(hvc_dcc_console_init);
+
+static int __init hvc_dcc_init(void)
+{
+	hvc_alloc(0, 0, &hvc_dcc_get_put_ops, 128);
+	return 0;
+}
+device_initcall(hvc_dcc_init);

drivers/char/ip2/ip2main.c

@@ -3224,7 +3224,7 @@ ip2trace (unsigned short pn, unsigned char cat, unsigned char label, unsigned lo
 
 MODULE_LICENSE("GPL");
 
-static struct pci_device_id ip2main_pci_tbl[] __devinitdata = {
+static struct pci_device_id ip2main_pci_tbl[] __devinitdata __used = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_COMPUTONE, PCI_DEVICE_ID_COMPUTONE_IP2EX) },
 	{ }
 };

drivers/char/rocket.c

@@ -1764,7 +1764,7 @@ static void rp_flush_buffer(struct tty_struct *tty)
 
 #ifdef CONFIG_PCI
 
-static struct pci_device_id __devinitdata rocket_pci_ids[] = {
+static struct pci_device_id __devinitdata __used rocket_pci_ids[] = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_RP, PCI_ANY_ID) },
 	{ }
 };

drivers/char/specialix.c

@@ -2355,7 +2355,7 @@ static void __exit specialix_exit_module(void)
 	func_exit();
 }
 
-static struct pci_device_id specialx_pci_tbl[] __devinitdata = {
+static struct pci_device_id specialx_pci_tbl[] __devinitdata __used = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_SPECIALIX, PCI_DEVICE_ID_SPECIALIX_IO8) },
 	{ }
 };

drivers/serial/8250.c

@@ -454,21 +454,40 @@ static void tsi_serial_out(struct uart_port *p, int offset, int value)
 		writeb(value, p->membase + offset);
 }
 
+/* Save the LCR value so it can be re-written when a Busy Detect IRQ occurs. */
+static inline void dwapb_save_out_value(struct uart_port *p, int offset,
+					int value)
+{
+	struct uart_8250_port *up =
+		container_of(p, struct uart_8250_port, port);
+
+	if (offset == UART_LCR)
+		up->lcr = value;
+}
+
+/* Read the IER to ensure any interrupt is cleared before returning from ISR. */
+static inline void dwapb_check_clear_ier(struct uart_port *p, int offset)
+{
+	if (offset == UART_TX || offset == UART_IER)
+		p->serial_in(p, UART_IER);
+}
+
 static void dwapb_serial_out(struct uart_port *p, int offset, int value)
 {
 	int save_offset = offset;
 	offset = map_8250_out_reg(p, offset) << p->regshift;
-	/* Save the LCR value so it can be re-written when a
-	 * Busy Detect interrupt occurs. */
-	if (save_offset == UART_LCR) {
-		struct uart_8250_port *up = (struct uart_8250_port *)p;
-		up->lcr = value;
-	}
+	dwapb_save_out_value(p, save_offset, value);
 	writeb(value, p->membase + offset);
-	/* Read the IER to ensure any interrupt is cleared before
-	 * returning from ISR. */
-	if (save_offset == UART_TX || save_offset == UART_IER)
-		value = p->serial_in(p, UART_IER);
+	dwapb_check_clear_ier(p, save_offset);
+}
+
+static void dwapb32_serial_out(struct uart_port *p, int offset, int value)
+{
+	int save_offset = offset;
+	offset = map_8250_out_reg(p, offset) << p->regshift;
+	dwapb_save_out_value(p, save_offset, value);
+	writel(value, p->membase + offset);
+	dwapb_check_clear_ier(p, save_offset);
 }
 
 static unsigned int io_serial_in(struct uart_port *p, int offset)
@@ -485,7 +504,8 @@ static void io_serial_out(struct uart_port *p, int offset, int value)
 
 static void set_io_from_upio(struct uart_port *p)
 {
-	struct uart_8250_port *up = (struct uart_8250_port *)p;
+	struct uart_8250_port *up =
+		container_of(p, struct uart_8250_port, port);
 	switch (p->iotype) {
 	case UPIO_HUB6:
 		p->serial_in = hub6_serial_in;
@@ -518,6 +538,11 @@ static void set_io_from_upio(struct uart_port *p)
 		p->serial_out = dwapb_serial_out;
 		break;
 
+	case UPIO_DWAPB32:
+		p->serial_in = mem32_serial_in;
+		p->serial_out = dwapb32_serial_out;
+		break;
+
 	default:
 		p->serial_in = io_serial_in;
 		p->serial_out = io_serial_out;
@@ -536,6 +561,7 @@ serial_out_sync(struct uart_8250_port *up, int offset, int value)
 	case UPIO_MEM32:
 	case UPIO_AU:
 	case UPIO_DWAPB:
+	case UPIO_DWAPB32:
 		p->serial_out(p, offset, value);
 		p->serial_in(p, UART_LCR);	/* safe, no side-effects */
 		break;
@@ -1319,7 +1345,8 @@ static inline void __stop_tx(struct uart_8250_port *p)
 
 static void serial8250_stop_tx(struct uart_port *port)
 {
-	struct uart_8250_port *up = (struct uart_8250_port *)port;
+	struct uart_8250_port *up =
+		container_of(port, struct uart_8250_port, port);
 
 	__stop_tx(up);
 
@@ -1336,7 +1363,8 @@ static void transmit_chars(struct uart_8250_port *up);
 
 static void serial8250_start_tx(struct uart_port *port)
 {
-	struct uart_8250_port *up = (struct uart_8250_port *)port;
+	struct uart_8250_port *up =
+		container_of(port, struct uart_8250_port, port);
 
 	if (!(up->ier & UART_IER_THRI)) {
 		up->ier |= UART_IER_THRI;
@@ -1364,7 +1392,8 @@ static void serial8250_start_tx(struct uart_port *port)
 
 static void serial8250_stop_rx(struct uart_port *port)
 {
-	struct uart_8250_port *up = (struct uart_8250_port *)port;
+	struct uart_8250_port *up =
+		container_of(port, struct uart_8250_port, port);
 
 	up->ier &= ~UART_IER_RLSI;
 	up->port.read_status_mask &= ~UART_LSR_DR;
@@ -1373,7 +1402,8 @@ static void serial8250_stop_rx(struct uart_port *port)
 
 static void serial8250_enable_ms(struct uart_port *port)
 {
-	struct uart_8250_port *up = (struct uart_8250_port *)port;
+	struct uart_8250_port *up =
+		container_of(port, struct uart_8250_port, port);
 
 	/* no MSR capabilities */
 	if (up->bugs & UART_BUG_NOMSR)
@@ -1581,7 +1611,8 @@ static irqreturn_t serial8250_interrupt(int irq, void *dev_id)
 			handled = 1;
 
 			end = NULL;
-		} else if (up->port.iotype == UPIO_DWAPB &&
+		} else if ((up->port.iotype == UPIO_DWAPB ||
+			    up->port.iotype == UPIO_DWAPB32) &&
 			  (iir & UART_IIR_BUSY) == UART_IIR_BUSY) {
 			/* The DesignWare APB UART has an Busy Detect (0x07)
 			 * interrupt meaning an LCR write attempt occured while the
@@ -1781,7 +1812,8 @@ static void serial8250_backup_timeout(unsigned long data)
 
 static unsigned int serial8250_tx_empty(struct uart_port *port)
 {
-	struct uart_8250_port *up = (struct uart_8250_port *)port;
+	struct uart_8250_port *up =
+		container_of(port, struct uart_8250_port, port);
 	unsigned long flags;
 	unsigned int lsr;
 
@@ -1795,7 +1827,8 @@ static unsigned int serial8250_tx_empty(struct uart_port *port)
 
 static unsigned int serial8250_get_mctrl(struct uart_port *port)
 {
-	struct uart_8250_port *up = (struct uart_8250_port *)port;
+	struct uart_8250_port *up =
+		container_of(port, struct uart_8250_port, port);
 	unsigned int status;
 	unsigned int ret;
 
@@ -1815,7 +1848,8 @@ static unsigned int serial8250_get_mctrl(struct uart_port *port)
 
 static void serial8250_set_mctrl(struct uart_port *port, unsigned int mctrl)
 {
-	struct uart_8250_port *up = (struct uart_8250_port *)port;
+	struct uart_8250_port *up =
+		container_of(port, struct uart_8250_port, port);
 	unsigned char mcr = 0;
 
 	if (mctrl & TIOCM_RTS)
@@ -1836,7 +1870,8 @@ static void serial8250_set_mctrl(struct uart_port *port, unsigned int mctrl)
 
 static void serial8250_break_ctl(struct uart_port *port, int break_state)
 {
-	struct uart_8250_port *up = (struct uart_8250_port *)port;
+	struct uart_8250_port *up =
+		container_of(port, struct uart_8250_port, port);
 	unsigned long flags;
 
 	spin_lock_irqsave(&up->port.lock, flags);
@@ -1890,7 +1925,8 @@ static void wait_for_xmitr(struct uart_8250_port *up, int bits)
 
 static int serial8250_get_poll_char(struct uart_port *port)
 {
-	struct uart_8250_port *up = (struct uart_8250_port *)port;
+	struct uart_8250_port *up =
+		container_of(port, struct uart_8250_port, port);
 	unsigned char lsr = serial_inp(up, UART_LSR);
 
 	if (!(lsr & UART_LSR_DR))
@@ -1904,7 +1940,8 @@ static void serial8250_put_poll_char(struct uart_port *port,
 			 unsigned char c)
 {
 	unsigned int ier;
-	struct uart_8250_port *up = (struct uart_8250_port *)port;
+	struct uart_8250_port *up =
+		container_of(port, struct uart_8250_port, port);
 
 	/*
 	 *	First save the IER then disable the interrupts
@@ -1938,11 +1975,14 @@ static void serial8250_put_poll_char(struct uart_port *port,
 
 static int serial8250_startup(struct uart_port *port)
 {
-	struct uart_8250_port *up = (struct uart_8250_port *)port;
+	struct uart_8250_port *up =
+		container_of(port, struct uart_8250_port, port);
 	unsigned long flags;
 	unsigned char lsr, iir;
 	int retval;
 
+	up->port.fifosize = uart_config[up->port.type].fifo_size;
+	up->tx_loadsz = uart_config[up->port.type].tx_loadsz;
 	up->capabilities = uart_config[up->port.type].flags;
 	up->mcr = 0;
 
@@ -2166,7 +2206,8 @@ static int serial8250_startup(struct uart_port *port)
 
 static void serial8250_shutdown(struct uart_port *port)
 {
-	struct uart_8250_port *up = (struct uart_8250_port *)port;
+	struct uart_8250_port *up =
+		container_of(port, struct uart_8250_port, port);
 	unsigned long flags;
 
 	/*
@@ -2235,7 +2276,8 @@ void
 serial8250_do_set_termios(struct uart_port *port, struct ktermios *termios,
 		          struct ktermios *old)
 {
-	struct uart_8250_port *up = (struct uart_8250_port *)port;
+	struct uart_8250_port *up =
+		container_of(port, struct uart_8250_port, port);
 	unsigned char cval, fcr = 0;
 	unsigned long flags;
 	unsigned int baud, quot;
@@ -2435,7 +2477,8 @@ serial8250_set_ldisc(struct uart_port *port, int new)
 void serial8250_do_pm(struct uart_port *port, unsigned int state,
 		      unsigned int oldstate)
 {
-	struct uart_8250_port *p = (struct uart_8250_port *)port;
+	struct uart_8250_port *p =
+		container_of(port, struct uart_8250_port, port);
 
 	serial8250_set_sleep(p, state != 0);
 }
@@ -2476,6 +2519,7 @@ static int serial8250_request_std_resource(struct uart_8250_port *up)
 	case UPIO_MEM32:
 	case UPIO_MEM:
 	case UPIO_DWAPB:
+	case UPIO_DWAPB32:
 		if (!up->port.mapbase)
 			break;
 
@@ -2513,6 +2557,7 @@ static void serial8250_release_std_resource(struct uart_8250_port *up)
 	case UPIO_MEM32:
 	case UPIO_MEM:
 	case UPIO_DWAPB:
+	case UPIO_DWAPB32:
 		if (!up->port.mapbase)
 			break;
 
@@ -2566,7 +2611,8 @@ static void serial8250_release_rsa_resource(struct uart_8250_port *up)
 
 static void serial8250_release_port(struct uart_port *port)
 {
-	struct uart_8250_port *up = (struct uart_8250_port *)port;
+	struct uart_8250_port *up =
+		container_of(port, struct uart_8250_port, port);
 
 	serial8250_release_std_resource(up);
 	if (up->port.type == PORT_RSA)
@@ -2575,7 +2621,8 @@ static void serial8250_release_port(struct uart_port *port)
 
 static int serial8250_request_port(struct uart_port *port)
 {
-	struct uart_8250_port *up = (struct uart_8250_port *)port;
+	struct uart_8250_port *up =
+		container_of(port, struct uart_8250_port, port);
 	int ret = 0;
 
 	ret = serial8250_request_std_resource(up);
@@ -2590,7 +2637,8 @@ static int serial8250_request_port(struct uart_port *port)
 
 static void serial8250_config_port(struct uart_port *port, int flags)
 {
-	struct uart_8250_port *up = (struct uart_8250_port *)port;
+	struct uart_8250_port *up =
+		container_of(port, struct uart_8250_port, port);
 	int probeflags = PROBE_ANY;
 	int ret;
 
@@ -2771,7 +2819,8 @@ serial8250_register_ports(struct uart_driver *drv, struct device *dev)
 
 static void serial8250_console_putchar(struct uart_port *port, int ch)
 {
-	struct uart_8250_port *up = (struct uart_8250_port *)port;
+	struct uart_8250_port *up =
+		container_of(port, struct uart_8250_port, port);
 
 	wait_for_xmitr(up, UART_LSR_THRE);
 	serial_out(up, UART_TX, ch);

drivers/serial/8250_pci.c

@@ -957,6 +957,22 @@ pci_default_setup(struct serial_private *priv,
 	return setup_port(priv, port, bar, offset, board->reg_shift);
 }
 
+static int
+ce4100_serial_setup(struct serial_private *priv,
+		  const struct pciserial_board *board,
+		  struct uart_port *port, int idx)
+{
+	int ret;
+
+	ret = setup_port(priv, port, 0, 0, board->reg_shift);
+	port->iotype = UPIO_MEM32;
+	port->type = PORT_XSCALE;
+	port->flags = (port->flags | UPF_FIXED_PORT | UPF_FIXED_TYPE);
+	port->regshift = 2;
+
+	return ret;
+}
+
 static int skip_tx_en_setup(struct serial_private *priv,
 			const struct pciserial_board *board,
 			struct uart_port *port, int idx)
@@ -981,6 +997,7 @@ static int skip_tx_en_setup(struct serial_private *priv,
 #define PCI_SUBDEVICE_ID_POCTAL232	0x0308
 #define PCI_SUBDEVICE_ID_POCTAL422	0x0408
 #define PCI_VENDOR_ID_ADVANTECH		0x13fe
+#define PCI_DEVICE_ID_INTEL_CE4100_UART 0x2e66
 #define PCI_DEVICE_ID_ADVANTECH_PCI3620	0x3620
 #define PCI_DEVICE_ID_TITAN_200I	0x8028
 #define PCI_DEVICE_ID_TITAN_400I	0x8048
@@ -1072,6 +1089,13 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = {
 		.subdevice	= PCI_ANY_ID,
 		.setup		= skip_tx_en_setup,
 	},
+	{
+		.vendor		= PCI_VENDOR_ID_INTEL,
+		.device		= PCI_DEVICE_ID_INTEL_CE4100_UART,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
+		.setup		= ce4100_serial_setup,
+	},
 	/*
 	 * ITE
 	 */
@@ -1592,6 +1616,7 @@ enum pci_board_num_t {
 	pbn_ADDIDATA_PCIe_2_3906250,
 	pbn_ADDIDATA_PCIe_4_3906250,
 	pbn_ADDIDATA_PCIe_8_3906250,
+	pbn_ce4100_1_115200,
 };
 
 /*
@@ -2281,6 +2306,12 @@ static struct pciserial_board pci_boards[] __devinitdata = {
 		.uart_offset	= 0x200,
 		.first_offset	= 0x1000,
 	},
+	[pbn_ce4100_1_115200] = {
+		.flags		= FL_BASE0,
+		.num_ports	= 1,
+		.base_baud	= 921600,
+		.reg_shift      = 2,
+	},
 };
 
 static const struct pci_device_id softmodem_blacklist[] = {
@@ -3765,6 +3796,11 @@ static struct pci_device_id serial_pci_tbl[] = {
 	{	PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9865,
 		0xA000, 0x3004,
 		0, 0, pbn_b0_bt_4_115200 },
+	/* Intel CE4100 */
+	{	PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_CE4100_UART,
+		PCI_ANY_ID,  PCI_ANY_ID, 0, 0,
+		pbn_ce4100_1_115200 },
+
 
 	/*
 	 * These entries match devices with class COMMUNICATION_SERIAL,

drivers/serial/Kconfig

@@ -1381,6 +1381,16 @@ config SERIAL_MSM_CONSOLE
 	depends on SERIAL_MSM=y
 	select SERIAL_CORE_CONSOLE
 
+config SERIAL_VT8500
+	bool "VIA VT8500 on-chip serial port support"
+	depends on ARM && ARCH_VT8500
+	select SERIAL_CORE
+
+config SERIAL_VT8500_CONSOLE
+	bool "VIA VT8500 serial console support"
+	depends on SERIAL_VT8500=y
+	select SERIAL_CORE_CONSOLE
+
 config SERIAL_NETX
 	tristate "NetX serial port support"
 	depends on ARM && ARCH_NETX
@@ -1632,4 +1642,19 @@ config SERIAL_ALTERA_UART_CONSOLE
 	help
 	  Enable a Altera UART port to be the system console.
 
+config SERIAL_IFX6X60
+        tristate "SPI protocol driver for Infineon 6x60 modem (EXPERIMENTAL)"
+	depends on GPIOLIB && SPI && EXPERIMENTAL
+	help
+	  Support for the IFX6x60 modem devices on Intel MID platforms.
+
+config SERIAL_PCH_UART
+	tristate "Intel EG20T PCH UART"
+	depends on PCI && DMADEVICES
+	select SERIAL_CORE
+	select PCH_DMA
+	help
+	  This driver is for PCH(Platform controller Hub) UART of Intel EG20T
+	  which is an IOH(Input/Output Hub) for x86 embedded processor.
+	  Enabling PCH_DMA, this PCH UART works as DMA mode.
 endmenu

drivers/serial/Makefile

@@ -80,12 +80,15 @@ obj-$(CONFIG_SERIAL_NETX) += netx-serial.o
 obj-$(CONFIG_SERIAL_OF_PLATFORM) += of_serial.o
 obj-$(CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL) += nwpserial.o
 obj-$(CONFIG_SERIAL_KS8695) += serial_ks8695.o
+obj-$(CONFIG_SERIAL_OMAP) += omap-serial.o
 obj-$(CONFIG_KGDB_SERIAL_CONSOLE) += kgdboc.o
 obj-$(CONFIG_SERIAL_QE) += ucc_uart.o
 obj-$(CONFIG_SERIAL_TIMBERDALE)	+= timbuart.o
 obj-$(CONFIG_SERIAL_GRLIB_GAISLER_APBUART) += apbuart.o
 obj-$(CONFIG_SERIAL_ALTERA_JTAGUART) += altera_jtaguart.o
 obj-$(CONFIG_SERIAL_ALTERA_UART) += altera_uart.o
+obj-$(CONFIG_SERIAL_VT8500) += vt8500_serial.o
 obj-$(CONFIG_SERIAL_MRST_MAX3110)	+= mrst_max3110.o
 obj-$(CONFIG_SERIAL_MFD_HSU)	+= mfd.o
-obj-$(CONFIG_SERIAL_OMAP) += omap-serial.o
+obj-$(CONFIG_SERIAL_IFX6X60)  	+= ifx6x60.o
+obj-$(CONFIG_SERIAL_PCH_UART)	+= pch_uart.o

drivers/serial/apbuart.c

@@ -521,11 +521,12 @@ static struct console grlib_apbuart_console = {
 };
 
 
-static void grlib_apbuart_configure(void);
+static int grlib_apbuart_configure(void);
 
 static int __init apbuart_console_init(void)
 {
-	grlib_apbuart_configure();
+	if (grlib_apbuart_configure())
+		return -ENODEV;
 	register_console(&grlib_apbuart_console);
 	return 0;
 }
@@ -596,57 +597,49 @@ static struct of_platform_driver grlib_apbuart_of_driver = {
 };
 
 
-static void grlib_apbuart_configure(void)
+static int grlib_apbuart_configure(void)
 {
-	static int enum_done;
 	struct device_node *np, *rp;
-	struct uart_port *port = NULL;
 	const u32 *prop;
-	int freq_khz;
-	int v = 0, d = 0;
-	unsigned int addr;
-	int irq, line;
-	struct amba_prom_registers *regs;
-
-	if (enum_done)
-		return;
+	int freq_khz, line = 0;
 
 	/* Get bus frequency */
 	rp = of_find_node_by_path("/");
+	if (!rp)
+		return -ENODEV;
 	rp = of_get_next_child(rp, NULL);
+	if (!rp)
+		return -ENODEV;
 	prop = of_get_property(rp, "clock-frequency", NULL);
+	if (!prop)
+		return -ENODEV;
 	freq_khz = *prop;
 
-	line = 0;
 	for_each_matching_node(np, apbuart_match) {
+		const int *irqs, *ampopts;
+		const struct amba_prom_registers *regs;
+		struct uart_port *port;
+		unsigned long addr;
 
-		int *vendor = (int *) of_get_property(np, "vendor", NULL);
-		int *device = (int *) of_get_property(np, "device", NULL);
-		int *irqs = (int *) of_get_property(np, "interrupts", NULL);
-		int *ampopts = (int *) of_get_property(np, "ampopts", NULL);
-		regs = (struct amba_prom_registers *)
-		    of_get_property(np, "reg", NULL);
-
+		ampopts = of_get_property(np, "ampopts", NULL);
 		if (ampopts && (*ampopts == 0))
 			continue; /* Ignore if used by another OS instance */
-		if (vendor)
-			v = *vendor;
-		if (device)
-			d = *device;
+
+		irqs = of_get_property(np, "interrupts", NULL);
+		regs = of_get_property(np, "reg", NULL);
 
 		if (!irqs || !regs)
-			return;
+			continue;
 
 		grlib_apbuart_nodes[line] = np;
 
 		addr = regs->phys_addr;
-		irq = *irqs;
 
 		port = &grlib_apbuart_ports[line];
 
 		port->mapbase = addr;
 		port->membase = ioremap(addr, sizeof(struct grlib_apbuart_regs_map));
-		port->irq = irq;
+		port->irq = *irqs;
 		port->iotype = UPIO_MEM;
 		port->ops = &grlib_apbuart_ops;
 		port->flags = UPF_BOOT_AUTOCONF;
@@ -658,12 +651,10 @@ static void grlib_apbuart_configure(void)
 		/* We support maximum UART_NR uarts ... */
 		if (line == UART_NR)
 			break;
-
 	}
 
-	enum_done = 1;
-
 	grlib_apbuart_driver.nr = grlib_apbuart_port_nr = line;
+	return line ? 0 : -ENODEV;
 }
 
 static int __init grlib_apbuart_init(void)
@@ -671,7 +662,9 @@ static int __init grlib_apbuart_init(void)
 	int ret;
 
 	/* Find all APBUARTS in device the tree and initialize their ports */
-	grlib_apbuart_configure();
+	ret = grlib_apbuart_configure();
+	if (ret)
+		return ret;
 
 	printk(KERN_INFO "Serial: GRLIB APBUART driver\n");
 

drivers/serial/cpm_uart/cpm_uart.h

@@ -76,18 +76,12 @@ struct uart_cpm_port {
 	unsigned char		*tx_buf;
 	unsigned char		*rx_buf;
 	u32			flags;
-	void			(*set_lineif)(struct uart_cpm_port *);
 	struct clk		*clk;
 	u8			brg;
 	uint			 dp_addr;
 	void			*mem_addr;
 	dma_addr_t		 dma_addr;
 	u32			mem_size;
-	/* helpers */
-	int			 baud;
-	int			 bits;
-	/* Keep track of 'odd' SMC2 wirings */
-	int			is_portb;
 	/* wait on close if needed */
 	int			wait_closing;
 	/* value to combine with opcode to form cpm command */

drivers/serial/cpm_uart/cpm_uart_core.c

@@ -72,6 +72,8 @@ static void cpm_uart_initbd(struct uart_cpm_port *pinfo);
 
 /**************************************************************/
 
+#define HW_BUF_SPD_THRESHOLD    9600
+
 /*
  * Check, if transmit buffers are processed
 */
@@ -503,6 +505,11 @@ static void cpm_uart_set_termios(struct uart_port *port,
 	pr_debug("CPM uart[%d]:set_termios\n", port->line);
 
 	baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk / 16);
+	if (baud <= HW_BUF_SPD_THRESHOLD ||
+	    (pinfo->port.state && pinfo->port.state->port.tty->low_latency))
+		pinfo->rx_fifosize = 1;
+	else
+		pinfo->rx_fifosize = RX_BUF_SIZE;
 
 	/* Character length programmed into the mode register is the
 	 * sum of: 1 start bit, number of data bits, 0 or 1 parity bit,
@@ -594,6 +601,17 @@ static void cpm_uart_set_termios(struct uart_port *port,
 	 */
 	bits++;
 	if (IS_SMC(pinfo)) {
+		/*
+		 * MRBLR can be changed while an SMC/SCC is operating only
+		 * if it is done in a single bus cycle with one 16-bit move
+		 * (not two 8-bit bus cycles back-to-back). This occurs when
+		 * the cp shifts control to the next RxBD, so the change does
+		 * not take effect immediately. To guarantee the exact RxBD
+		 * on which the change occurs, change MRBLR only while the
+		 * SMC/SCC receiver is disabled.
+		 */
+		out_be16(&pinfo->smcup->smc_mrblr, pinfo->rx_fifosize);
+
 		/* Set the mode register.  We want to keep a copy of the
 		 * enables, because we want to put them back if they were
 		 * present.
@@ -604,6 +622,7 @@ static void cpm_uart_set_termios(struct uart_port *port,
 		out_be16(&smcp->smc_smcmr, smcr_mk_clen(bits) | cval |
 		    SMCMR_SM_UART | prev_mode);
 	} else {
+		out_be16(&pinfo->sccup->scc_genscc.scc_mrblr, pinfo->rx_fifosize);
 		out_be16(&sccp->scc_psmr, (sbits << 12) | scval);
 	}
 

drivers/serial/ifx6x60.h

+/****************************************************************************
+ *
+ * Driver for the IFX spi modem.
+ *
+ * Copyright (C) 2009, 2010 Intel Corp
+ * Jim Stanley <jim.stanley@intel.com>
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301,
+ * USA
+ *
+ *
+ *
+ *****************************************************************************/
+#ifndef _IFX6X60_H
+#define _IFX6X60_H
+
+#define DRVNAME				"ifx6x60"
+#define TTYNAME				"ttyIFX"
+
+/* #define IFX_THROTTLE_CODE */
+
+#define IFX_SPI_MAX_MINORS		1
+#define IFX_SPI_TRANSFER_SIZE		2048
+#define IFX_SPI_FIFO_SIZE		4096
+
+#define IFX_SPI_HEADER_OVERHEAD		4
+#define IFX_RESET_TIMEOUT		msecs_to_jiffies(50)
+
+/* device flags bitfield definitions */
+#define IFX_SPI_STATE_PRESENT		0
+#define IFX_SPI_STATE_IO_IN_PROGRESS	1
+#define IFX_SPI_STATE_IO_READY		2
+#define IFX_SPI_STATE_TIMER_PENDING	3
+
+/* flow control bitfields */
+#define IFX_SPI_DCD			0
+#define IFX_SPI_CTS			1
+#define IFX_SPI_DSR			2
+#define IFX_SPI_RI			3
+#define IFX_SPI_DTR			4
+#define IFX_SPI_RTS			5
+#define IFX_SPI_TX_FC			6
+#define IFX_SPI_RX_FC			7
+#define IFX_SPI_UPDATE			8
+
+#define IFX_SPI_PAYLOAD_SIZE		(IFX_SPI_TRANSFER_SIZE - \
+						IFX_SPI_HEADER_OVERHEAD)
+
+#define IFX_SPI_IRQ_TYPE		DETECT_EDGE_RISING
+#define IFX_SPI_GPIO_TARGET		0
+#define IFX_SPI_GPIO0			0x105
+
+#define IFX_SPI_STATUS_TIMEOUT		(2000*HZ)
+
+/* values for bits in power status byte */
+#define IFX_SPI_POWER_DATA_PENDING	1
+#define IFX_SPI_POWER_SRDY		2
+
+struct ifx_spi_device {
+	/* Our SPI device */
+	struct spi_device *spi_dev;
+
+	/* Port specific data */
+	struct kfifo tx_fifo;
+	spinlock_t fifo_lock;
+	unsigned long signal_state;
+
+	/* TTY Layer logic */
+	struct tty_port tty_port;
+	struct device *tty_dev;
+	int minor;
+
+	/* Low level I/O work */
+	struct tasklet_struct io_work_tasklet;
+	unsigned long flags;
+	dma_addr_t rx_dma;
+	dma_addr_t tx_dma;
+
+	int is_6160;				/* Modem type */
+
+	spinlock_t write_lock;
+	int write_pending;
+	spinlock_t power_lock;
+	unsigned char power_status;
+
+	unsigned char *rx_buffer;
+	unsigned char *tx_buffer;
+	dma_addr_t rx_bus;
+	dma_addr_t tx_bus;
+	unsigned char spi_more;
+	unsigned char spi_slave_cts;
+
+	struct timer_list spi_timer;
+
+	struct spi_message spi_msg;
+	struct spi_transfer spi_xfer;
+
+	struct {
+		/* gpio lines */
+		unsigned short srdy;		/* slave-ready gpio */
+		unsigned short mrdy;		/* master-ready gpio */
+		unsigned short reset;		/* modem-reset gpio */
+		unsigned short po;		/* modem-on gpio */
+		unsigned short reset_out;	/* modem-in-reset gpio */
+		/* state/stats */
+		int unack_srdy_int_nb;
+	} gpio;
+
+	/* modem reset */
+	unsigned long mdm_reset_state;
+#define MR_START	0
+#define MR_INPROGRESS	1
+#define MR_COMPLETE	2
+	wait_queue_head_t mdm_reset_wait;
+};
+
+#endif /* _IFX6X60_H */

drivers/serial/mpc52xx_uart.c

@@ -838,7 +838,11 @@ mpc52xx_uart_set_termios(struct uart_port *port, struct ktermios *new,
 static const char *
 mpc52xx_uart_type(struct uart_port *port)
 {
-	return port->type == PORT_MPC52xx ? "MPC52xx PSC" : NULL;
+	/*
+	 * We keep using PORT_MPC52xx for historic reasons although it applies
+	 * for MPC512x, too, but print "MPC5xxx" to not irritate users
+	 */
+	return port->type == PORT_MPC52xx ? "MPC5xxx PSC" : NULL;
 }
 
 static void

drivers/serial/omap-serial.c

@@ -866,12 +866,6 @@ serial_omap_type(struct uart_port *port)
 	return up->name;
 }
 
-#ifdef CONFIG_SERIAL_OMAP_CONSOLE
-
-static struct uart_omap_port *serial_omap_console_ports[4];
-
-static struct uart_driver serial_omap_reg;
-
 #define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE)
 
 static inline void wait_for_xmitr(struct uart_omap_port *up)
@@ -905,6 +899,34 @@ static inline void wait_for_xmitr(struct uart_omap_port *up)
 	}
 }
 
+#ifdef CONFIG_CONSOLE_POLL
+
+static void serial_omap_poll_put_char(struct uart_port *port, unsigned char ch)
+{
+	struct uart_omap_port *up = (struct uart_omap_port *)port;
+	wait_for_xmitr(up);
+	serial_out(up, UART_TX, ch);
+}
+
+static int serial_omap_poll_get_char(struct uart_port *port)
+{
+	struct uart_omap_port *up = (struct uart_omap_port *)port;
+	unsigned int status = serial_in(up, UART_LSR);
+
+	if (!(status & UART_LSR_DR))
+		return NO_POLL_CHAR;
+
+	return serial_in(up, UART_RX);
+}
+
+#endif /* CONFIG_CONSOLE_POLL */
+
+#ifdef CONFIG_SERIAL_OMAP_CONSOLE
+
+static struct uart_omap_port *serial_omap_console_ports[4];
+
+static struct uart_driver serial_omap_reg;
+
 static void serial_omap_console_putchar(struct uart_port *port, int ch)
 {
 	struct uart_omap_port *up = (struct uart_omap_port *)port;
@@ -1022,6 +1044,10 @@ static struct uart_ops serial_omap_pops = {
 	.request_port	= serial_omap_request_port,
 	.config_port	= serial_omap_config_port,
 	.verify_port	= serial_omap_verify_port,
+#ifdef CONFIG_CONSOLE_POLL
+	.poll_put_char  = serial_omap_poll_put_char,
+	.poll_get_char  = serial_omap_poll_get_char,
+#endif
 };
 
 static struct uart_driver serial_omap_reg = {

drivers/serial/serial_core.c

@@ -1985,7 +1985,8 @@ int uart_suspend_port(struct uart_driver *drv, struct uart_port *uport)
 
 	tty_dev = device_find_child(uport->dev, &match, serial_match_port);
 	if (device_may_wakeup(tty_dev)) {
-		enable_irq_wake(uport->irq);
+		if (!enable_irq_wake(uport->irq))
+			uport->irq_wake = 1;
 		put_device(tty_dev);
 		mutex_unlock(&port->mutex);
 		return 0;
@@ -2051,7 +2052,10 @@ int uart_resume_port(struct uart_driver *drv, struct uart_port *uport)
 
 	tty_dev = device_find_child(uport->dev, &match, serial_match_port);
 	if (!uport->suspended && device_may_wakeup(tty_dev)) {
+		if (uport->irq_wake) {
 			disable_irq_wake(uport->irq);
+			uport->irq_wake = 0;
+		}
 		mutex_unlock(&port->mutex);
 		return 0;
 	}
@@ -2134,6 +2138,7 @@ uart_report_port(struct uart_driver *drv, struct uart_port *port)
 	case UPIO_AU:
 	case UPIO_TSI:
 	case UPIO_DWAPB:
+	case UPIO_DWAPB32:
 		snprintf(address, sizeof(address),
 			 "MMIO 0x%llx", (unsigned long long)port->mapbase);
 		break;
@@ -2554,6 +2559,7 @@ int uart_match_port(struct uart_port *port1, struct uart_port *port2)
 	case UPIO_AU:
 	case UPIO_TSI:
 	case UPIO_DWAPB:
+	case UPIO_DWAPB32:
 		return (port1->mapbase == port2->mapbase);
 	}
 	return 0;

drivers/tty/tty_io.c

@@ -2627,6 +2627,11 @@ long tty_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 		return put_user(tty->ldisc->ops->num, (int __user *)p);
 	case TIOCSETD:
 		return tiocsetd(tty, p);
+	case TIOCGDEV:
+	{
+		unsigned int ret = new_encode_dev(tty_devnum(real_tty));
+		return put_user(ret, (unsigned int __user *)p);
+	}
 	/*
 	 * Break handling
 	 */
@@ -3241,9 +3246,45 @@ static int __init tty_class_init(void)
 postcore_initcall(tty_class_init);
 
 /* 3/2004 jmc: why do these devices exist? */
-
 static struct cdev tty_cdev, console_cdev;
 
+static ssize_t show_cons_active(struct device *dev,
+				struct device_attribute *attr, char *buf)
+{
+	struct console *cs[16];
+	int i = 0;
+	struct console *c;
+	ssize_t count = 0;
+
+	acquire_console_sem();
+	for (c = console_drivers; c; c = c->next) {
+		if (!c->device)
+			continue;
+		if (!c->write)
+			continue;
+		if ((c->flags & CON_ENABLED) == 0)
+			continue;
+		cs[i++] = c;
+		if (i >= ARRAY_SIZE(cs))
+			break;
+	}
+	while (i--)
+		count += sprintf(buf + count, "%s%d%c",
+				 cs[i]->name, cs[i]->index, i ? ' ':'\n');
+	release_console_sem();
+
+	return count;
+}
+static DEVICE_ATTR(active, S_IRUGO, show_cons_active, NULL);
+
+static struct device *consdev;
+
+void console_sysfs_notify(void)
+{
+	if (consdev)
+		sysfs_notify(&consdev->kobj, NULL, "active");
+}
+
 /*
  * Ok, now we can initialize the rest of the tty devices and can count
  * on memory allocations, interrupts etc..
@@ -3254,15 +3295,18 @@ int __init tty_init(void)
 	if (cdev_add(&tty_cdev, MKDEV(TTYAUX_MAJOR, 0), 1) ||
 	    register_chrdev_region(MKDEV(TTYAUX_MAJOR, 0), 1, "/dev/tty") < 0)
 		panic("Couldn't register /dev/tty driver\n");
-	device_create(tty_class, NULL, MKDEV(TTYAUX_MAJOR, 0), NULL,
-			      "tty");
+	device_create(tty_class, NULL, MKDEV(TTYAUX_MAJOR, 0), NULL, "tty");
 
 	cdev_init(&console_cdev, &console_fops);
 	if (cdev_add(&console_cdev, MKDEV(TTYAUX_MAJOR, 1), 1) ||
 	    register_chrdev_region(MKDEV(TTYAUX_MAJOR, 1), 1, "/dev/console") < 0)
 		panic("Couldn't register /dev/console driver\n");
-	device_create(tty_class, NULL, MKDEV(TTYAUX_MAJOR, 1), NULL,
+	consdev = device_create(tty_class, NULL, MKDEV(TTYAUX_MAJOR, 1), NULL,
 			      "console");
+	if (IS_ERR(consdev))
+		consdev = NULL;
+	else
+		device_create_file(consdev, &dev_attr_active);
 
 #ifdef CONFIG_VT
 	vty_init(&console_fops);

drivers/tty/vt/vt.c

@@ -235,6 +235,14 @@ enum {
 	blank_vesa_wait,
 };
 
+/*
+ * /sys/class/tty/tty0/
+ *
+ * the attribute 'active' contains the name of the current vc
+ * console and it supports poll() to detect vc switches
+ */
+static struct device *tty0dev;
+
 /*
  * Notifier list for console events.
  */
@@ -688,6 +696,8 @@ void redraw_screen(struct vc_data *vc, int is_switch)
 			save_screen(old_vc);
 			set_origin(old_vc);
 		}
+		if (tty0dev)
+			sysfs_notify(&tty0dev->kobj, NULL, "active");
 	} else {
 		hide_cursor(vc);
 		redraw = 1;
@@ -2967,13 +2977,24 @@ static const struct tty_operations con_ops = {
 
 static struct cdev vc0_cdev;
 
+static ssize_t show_tty_active(struct device *dev,
+				struct device_attribute *attr, char *buf)
+{
+	return sprintf(buf, "tty%d\n", fg_console + 1);
+}
+static DEVICE_ATTR(active, S_IRUGO, show_tty_active, NULL);
+
 int __init vty_init(const struct file_operations *console_fops)
 {
 	cdev_init(&vc0_cdev, console_fops);
 	if (cdev_add(&vc0_cdev, MKDEV(TTY_MAJOR, 0), 1) ||
 	    register_chrdev_region(MKDEV(TTY_MAJOR, 0), 1, "/dev/vc/0") < 0)
 		panic("Couldn't register /dev/tty0 driver\n");
-	device_create(tty_class, NULL, MKDEV(TTY_MAJOR, 0), NULL, "tty0");
+	tty0dev = device_create(tty_class, NULL, MKDEV(TTY_MAJOR, 0), NULL, "tty0");
+	if (IS_ERR(tty0dev))
+		tty0dev = NULL;
+	else
+		device_create_file(tty0dev, &dev_attr_active);
 
 	vcs_init();
 

drivers/video/xen-fbfront.c

@@ -492,7 +492,7 @@ xenfb_make_preferred_console(void)
 		return;
 
 	acquire_console_sem();
-	for (c = console_drivers; c; c = c->next) {
+	for_each_console(c) {
 		if (!strcmp(c->name, "tty") && c->index == 0)
 			break;
 	}

fs/compat_ioctl.c

@@ -836,6 +836,7 @@ COMPATIBLE_IOCTL(TCSETSW)
 COMPATIBLE_IOCTL(TCSETSF)
 COMPATIBLE_IOCTL(TIOCLINUX)
 COMPATIBLE_IOCTL(TIOCSBRK)
+COMPATIBLE_IOCTL(TIOCGDEV)
 COMPATIBLE_IOCTL(TIOCCBRK)
 COMPATIBLE_IOCTL(TIOCGSID)
 COMPATIBLE_IOCTL(TIOCGICOUNT)

fs/proc/Makefile

@@ -15,6 +15,7 @@ proc-y	+= devices.o
 proc-y	+= interrupts.o
 proc-y	+= loadavg.o
 proc-y	+= meminfo.o
+proc-y	+= proc_console.o
 proc-y	+= stat.o
 proc-y	+= uptime.o
 proc-y	+= version.o

fs/proc/proc_console.c

+/*
+ * Copyright (c) 2010 Werner Fink, Jiri Slaby
+ *
+ * Licensed under GPLv2
+ */
+
+#include <linux/console.h>
+#include <linux/kernel.h>
+#include <linux/proc_fs.h>
+#include <linux/seq_file.h>
+#include <linux/tty_driver.h>
+
+/*
+ * This is handler for /proc/consoles
+ */
+static int show_console_dev(struct seq_file *m, void *v)
+{
+	static const struct {
+		short flag;
+		char name;
+	} con_flags[] = {
+		{ CON_ENABLED,		'E' },
+		{ CON_CONSDEV,		'C' },
+		{ CON_BOOT,		'B' },
+		{ CON_PRINTBUFFER,	'p' },
+		{ CON_BRL,		'b' },
+		{ CON_ANYTIME,		'a' },
+	};
+	char flags[ARRAY_SIZE(con_flags) + 1];
+	struct console *con = v;
+	unsigned int a;
+	int len;
+	dev_t dev = 0;
+
+	if (con->device) {
+		const struct tty_driver *driver;
+		int index;
+		driver = con->device(con, &index);
+		if (driver) {
+			dev = MKDEV(driver->major, driver->minor_start);
+			dev += index;
+		}
+	}
+
+	for (a = 0; a < ARRAY_SIZE(con_flags); a++)
+		flags[a] = (con->flags & con_flags[a].flag) ?
+			con_flags[a].name : ' ';
+	flags[a] = 0;
+
+	seq_printf(m, "%s%d%n", con->name, con->index, &len);
+	len = 21 - len;
+	if (len < 1)
+		len = 1;
+	seq_printf(m, "%*c%c%c%c (%s)", len, ' ', con->read ? 'R' : '-',
+			con->write ? 'W' : '-', con->unblank ? 'U' : '-',
+			flags);
+	if (dev)
+		seq_printf(m, " %4d:%d", MAJOR(dev), MINOR(dev));
+
+	seq_printf(m, "\n");
+
+	return 0;
+}
+
+static void *c_start(struct seq_file *m, loff_t *pos)
+{
+	struct console *con;
+	loff_t off = 0;
+
+	acquire_console_sem();
+	for_each_console(con)
+		if (off++ == *pos)
+			break;
+
+	return con;
+}
+
+static void *c_next(struct seq_file *m, void *v, loff_t *pos)
+{
+	struct console *con = v;
+	++*pos;
+	return con->next;
+}
+
+static void c_stop(struct seq_file *m, void *v)
+{
+	release_console_sem();
+}
+
+static const struct seq_operations consoles_op = {
+	.start	= c_start,
+	.next	= c_next,
+	.stop	= c_stop,
+	.show	= show_console_dev
+};
+
+static int consoles_open(struct inode *inode, struct file *file)
+{
+	return seq_open(file, &consoles_op);
+}
+
+static const struct file_operations proc_consoles_operations = {
+	.open		= consoles_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= seq_release,
+};
+
+static int register_proc_consoles(void)
+{
+	proc_create("consoles", 0, NULL, &proc_consoles_operations);
+	return 0;
+}
+module_init(register_proc_consoles);

include/asm-generic/ioctls.h

@@ -67,6 +67,7 @@
 #endif
 #define TIOCGPTN	_IOR('T', 0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
 #define TIOCSPTLCK	_IOW('T', 0x31, int)  /* Lock/unlock Pty */
+#define TIOCGDEV	_IOR('T', 0x32, unsigned int) /* Get primary device node of /dev/console */
 #define TCGETX		0x5432 /* SYS5 TCGETX compatibility */
 #define TCSETX		0x5433
 #define TCSETXF		0x5434