Merge tag 'iio-for-6.2a-take2' of...

Merge tag 'iio-for-6.2a-take2' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next

Jonathan writes:

1st set of IIO new device support, feature and cleanup for 6.2 (take2)

We have finally managed to take the mlock mutex entirely private so as
to avoid it being used for multiple purposes.  Now it is just used to
protect device mode transitions (typically to and from buffered capture).

Includes merge of an immutable i2c branch to get the new
i2c_client_get_device_id() (thanks to Wolfram for providing the branch).

Based on rc3 to pick up some precursor fixes from early in the cycle and
avoid an unnecessarily messy history.

New device support
* adi,ad4310
  - New driver to support this very flexible measurement device including
    a 24 bit ADC. Later fix for documentation build issue.
* adi,adxl355
  - Add support of the ADXL359 accelerometer.
* adi,ltc2983
  - Support additional variants of the temperatures sensor:
    LTC2984 with an EEPROM
    LTC2985, LTC2986 with only 10 channels.
* invensense,icm42600
  - Add support for icm42631 (needed only ID and WHOAMI)
* kionix,kx022a
  - New driver for this 3 axis accelerometer.
* maxim,max11401
  - New driver to support this 24-bit 10 channel ADC.
    Includes some new ABI to support configuration of notch filters.
* mediatek,mt6370
  - Add new driver to support the ADC part of the mt6370.
* st,lsm6dsx
  - Add support for LSM6DSV accelerometer and gyroscope. Simple additional
    of chip specific data and IDs.
  - Add support for LSM6DSV16X accelerometer and gyroscope.  Compatible with
    features currently implemented for the LSM6DSV.
* st,stm32-adc
  - Add support for stm32pm13x SoCs.

core / subsystem wide:
 - Add new IIO_STATIC_CONST_DEVICE_ATTR() which is a dance necessary to
   allow for the wrapping of attributes in the code that duplicates them
   for multiple buffers.
 - Harden against future issues with expectation that all buffer attributes
   are iio_dev_attrs by changing the code to take an array of pointers
   of the correct type.
 - Last transitions of drivers to local locks rather than missuses of mlock.
 - Add an iio_device_claim_buffer_mode() callback to avoid a race in the
   max30100 driver without directly using mlock.
 - Move mlock to the opaque IIO device structure to prevent misuse.
 - Add missing spi_device_id tables to support auto loading of modules.
 - Update some ADI maintainers in DT bindings.
 - A few more moves of bus drivers and core module sets to export
   name spaces.
 - Extensive use of new devm_regulator_get_enable() and friends.
 - Switch a bunch of i2c drivers to probe_new() including the bmp280
   which makes use of the new i2c_client_get_device_id() helper to
   simplify this change.

dt-bindings:
 - More use of spi-peripheral-props.yaml.

Features
* freescale,mpl115
  - Use runtime PM to implement shutdown GPIO support.
* melexis,mlx90632
  - More sophisticated runtime power management
  - Provide access to sampling frequency.
  - Trivial follow up fixes.
* microchip,mcp3911
  - Support control of PGA.
* st,lsm6dsx
  - Add support for software triggers for cases where the IRQ lines
    are not wired up.
* vishay,vcnl4000
  - Add control of integration time.

Minor cleanups and fixes
* adi,ad4130
  - Improve ABI documentation formatting.
  - Kconfig dependency fixup.
* adi,ad5758
  - Minor dt binding fix.
* adi,ad9834
  - Tidy up line breaks.
* adi,ade7854
  - Minor improvement in code clarity by replacing a ternary.
* adi,admv8818
  - Harden code against hardware returning wrong values.
* adi,adxl355
  - Warn only if unknown device ID detected to allow for fall back
    device tree compatibles on future devices.
* adi,ltc2983
  - dt-bindings clarifications and general improvements.
  - Ensure DMA safe buffer for bulk writes without relying on current
    regmap implementation choices.
* avago,adps9960
  - Fix up a disconnect between event enable attributes and what was
    enabled.
* bosch,bma400
  - Switch to dev_err_probe() from open coded EPROBE_DEFER handling.
* cosmic,cc10001
  - Fully devm managed probe() and related tidying up.
* meas,ms5611
  - Add an example of spi-max-frequency.
* meleixs,mlx90632
  - Tidy up confusing error return value.
  - Style improvements.
* multiplexer
  - Switch to dev_err_probe() from open coded EPROBE_DEFER handling.
* qcom,spmi-vadc
  - Minor dt binding improvements.
* rockchip,saradc
  - Add ID for rv1126.
* semtech,sx9360
  - Add SAMM0208 ACPI ID. Doesn't appear to be a valid vendor prefix
    but is in the wild.
* st,lsm6dsx
  - Factor out common code as _device_set_enable().
  - Fix up wrong docs after LSM6DSV addition.
* st,stm32-adc
  - Manage the min sampling time on all internal channels.
* trig,sysfs
  - Improve error labels.

* tag 'iio-for-6.2a-take2' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (146 commits)
  iio: pressure: bmp280: convert to i2c's .probe_new()
  iio: imu: st_lsm6dsx: fix LSM6DSV sensor description
  iio: adc: ad4130: depend on GPIOLIB
  staging: iio: meter: replace ternary operator by if condition
  iio: light: apds9960: Fix iio_event_spec structures
  dt-bindings: iio: imu: Add inv_icm42600 documentation
  iio: imu: inv_icm42600: Add support for icm42631
  dt-bindings: iio: adc: rockchip-saradc: Add saradc for rv1126
  dt-bindings: iio: dac: adi,ad5758: Drop 'contains' from 'adi,dc-dc-mode'
  dt-bindings: iio: imu: st_lsm6dsx: add lsm6dsv16x
  iio: imu: st_lsm6dsx: add support to LSM6DSV16X
  iio: proximity: sx9360: Add a new ACPI hardware ID
  iio: temperature: mlx90632: Add missing static marking on devm_pm_ops
  iio: temperature: mlx90632: Add error handling for devm_pm_runtime_enable()
  iio: temperature: ltc2983: support more parts
  dt-bindings: iio: temperature: ltc2983: support more parts
  dt-bindings: iio: temperature: ltc2983: use generic node name in example
  dt-bindings: iio: temperature: ltc2983: describe broken mux delay property
  dt-bindings: iio: temperature: ltc2983: refine descriptions
  dt-bindings: iio: temperature: ltc2983: change default excitation for custom thermistors
  ...

Documentation/ABI/testing/sysfs-bus-iio-adc-ad4130

+What:		/sys/bus/iio/devices/iio:deviceX/in_voltage-voltage_filter_mode_available
+KernelVersion:  6.2
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Reading returns a list with the possible filter modes.
+
+		  * "sinc4"       - Sinc 4. Excellent noise performance. Long
+                    1st conversion time. No natural 50/60Hz rejection.
+
+		  * "sinc4+sinc1" - Sinc4 + averaging by 8. Low 1st conversion
+		    time.
+
+		  * "sinc3"	      - Sinc3. Moderate 1st conversion time.
+		    Good noise performance.
+
+		  * "sinc3+rej60" - Sinc3 + 60Hz rejection. At a sampling
+		    frequency of 50Hz, achieves simultaneous 50Hz and 60Hz
+		    rejection.
+
+		  * "sinc3+sinc1" - Sinc3 + averaging by 8. Low 1st conversion
+		    time. Best used with a sampling frequency of at least
+		    216.19Hz.
+
+		  * "sinc3+pf1"   - Sinc3 + Post Filter 1. 53dB rejection @
+		    50Hz, 58dB rejection @ 60Hz.
+
+		  * "sinc3+pf2"   - Sinc3 + Post Filter 2. 70dB rejection @
+		    50Hz, 70dB rejection @ 60Hz.
+
+		  * "sinc3+pf3"   - Sinc3 + Post Filter 3. 99dB rejection @
+		    50Hz, 103dB rejection @ 60Hz.
+
+		  * "sinc3+pf4"   - Sinc3 + Post Filter 4. 103dB rejection @
+		    50Hz, 109dB rejection @ 60Hz.
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_voltageY-voltageZ_filter_mode
+KernelVersion:  6.2
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Set the filter mode of the differential channel. When the filter
+		mode changes, the in_voltageY-voltageZ_sampling_frequency and
+		in_voltageY-voltageZ_sampling_frequency_available attributes
+		might also change to accommodate the new filter mode.
+		If the current sampling frequency is out of range for the new
+		filter mode, the sampling frequency will be changed to the
+		closest valid one.

Documentation/ABI/testing/sysfs-bus-iio-adc-max11410

+What:		/sys/bus/iio/devices/iio:deviceX/in_voltage_filterY_notch_en
+Date:		September 2022
+KernelVersion:  6.0
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Enable or disable a notch filter.
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_voltage_filterY_notch_center
+Date:		September 2022
+KernelVersion:  6.0
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Center frequency of the notch filter in Hz.

Documentation/devicetree/bindings/iio/accel/adi,adxl355.yaml

@@ -4,20 +4,22 @@
 $id: http://devicetree.org/schemas/iio/accel/adi,adxl355.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Analog Devices ADXL355 3-Axis, Low noise MEMS Accelerometer
+title: Analog Devices ADXL355 and ADXL359 3-Axis, Low noise MEMS Accelerometers
 
 maintainers:
   - Puranjay Mohan <puranjay12@gmail.com>
 
 description: |
-  Analog Devices ADXL355 3-Axis, Low noise MEMS Accelerometer that supports
-  both I2C & SPI interfaces
+  Analog Devices ADXL355 and ADXL359 3-Axis, Low noise MEMS Accelerometers that
+  support both I2C & SPI interfaces
     https://www.analog.com/en/products/adxl355.html
+    https://www.analog.com/en/products/adxl359.html
 
 properties:
   compatible:
     enum:
       - adi,adxl355
+      - adi,adxl359
 
   reg:
     maxItems: 1

Documentation/devicetree/bindings/iio/accel/kionix,kx022a.yaml

+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/accel/kionix,kx022a.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ROHM/Kionix KX022A Accelerometer
+
+maintainers:
+  - Matti Vaittinen <mazziesaccount@gmail.com>
+
+description: |
+  KX022A is a 3-axis accelerometer supporting +/- 2G, 4G, 8G and 16G ranges,
+  output data-rates from 0.78Hz to 1600Hz and a hardware-fifo buffering.
+  KX022A can be accessed either via I2C or SPI.
+
+properties:
+  compatible:
+    const: kionix,kx022a
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 1
+    maxItems: 2
+
+  interrupt-names:
+    minItems: 1
+    items:
+      - enum: [INT1, INT2]
+      - const: INT2
+
+  vdd-supply: true
+  io-vdd-supply: true
+
+  mount-matrix:
+    description: |
+      an optional 3x3 mounting rotation matrix.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        accel@1f {
+            compatible = "kionix,kx022a";
+            reg = <0x1f>;
+
+            interrupt-parent = <&gpio1>;
+            interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
+            interrupt-names = "INT1";
+
+            io-vdd-supply = <&iovdd>;
+            vdd-supply = <&vdd>;
+        };
+    };

Documentation/devicetree/bindings/iio/adc/adi,ad4130.yaml

+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2022 Analog Devices Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/adi,ad4130.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD4130 ADC device driver
+
+maintainers:
+  - Cosmin Tanislav <cosmin.tanislav@analog.com>
+
+description: |
+  Bindings for the Analog Devices AD4130 ADC. Datasheet can be found here:
+    https://www.analog.com/media/en/technical-documentation/data-sheets/AD4130-8.pdf
+
+properties:
+  compatible:
+    enum:
+      - adi,ad4130
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+    description: phandle to the master clock (mclk)
+
+  clock-names:
+    items:
+      - const: mclk
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-names:
+    description: |
+      Specify which interrupt pin should be configured as Data Ready / FIFO
+      interrupt.
+      Default if not supplied is int.
+    enum:
+      - int
+      - clk
+      - p2
+      - dout
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+  '#clock-cells':
+    const: 0
+
+  clock-output-names:
+    maxItems: 1
+
+  refin1-supply:
+    description: refin1 supply. Can be used as reference for conversion.
+
+  refin2-supply:
+    description: refin2 supply. Can be used as reference for conversion.
+
+  avdd-supply:
+    description: AVDD voltage supply. Can be used as reference for conversion.
+
+  iovdd-supply:
+    description: IOVDD voltage supply. Used for the chip interface.
+
+  spi-max-frequency:
+    maximum: 5000000
+
+  adi,ext-clk-freq-hz:
+    description: Specify the frequency of the external clock.
+    enum: [76800, 153600]
+    default: 76800
+
+  adi,bipolar:
+    description: Specify if the device should be used in bipolar mode.
+    type: boolean
+
+  adi,vbias-pins:
+    description: Analog inputs to apply a voltage bias of (AVDD − AVSS) / 2 to.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 1
+    maxItems: 16
+    items:
+      minimum: 0
+      maximum: 15
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+patternProperties:
+  "^channel@([0-9a-f])$":
+    type: object
+    $ref: adc.yaml
+    unevaluatedProperties: false
+
+    properties:
+      reg:
+        description: The channel number.
+        minimum: 0
+        maximum: 15
+
+      diff-channels:
+        description: |
+          Besides the analog inputs available, internal inputs can be used.
+          16: Internal temperature sensor.
+          17: AVSS
+          18: Internal reference
+          19: DGND
+          20: (AVDD − AVSS)/6+
+          21: (AVDD − AVSS)/6-
+          22: (IOVDD − DGND)/6+
+          23: (IOVDD − DGND)/6-
+          24: (ALDO − AVSS)/6+
+          25: (ALDO − AVSS)/6-
+          26: (DLDO − DGND)/6+
+          27: (DLDO − DGND)/6-
+          28: V_MV_P
+          29: V_MV_M
+        items:
+          minimum: 0
+          maximum: 29
+
+      adi,reference-select:
+        description: |
+          Select the reference source to use when converting on the
+          specific channel. Valid values are:
+          0: REFIN1(+)/REFIN1(−)
+          1: REFIN2(+)/REFIN2(−)
+          2: REFOUT/AVSS (Internal reference)
+          3: AVDD/AVSS
+          If not specified, REFIN1 is used.
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1, 2, 3]
+        default: 0
+
+      adi,excitation-pin-0:
+        description: |
+          Analog input to apply excitation current to while the channel
+          is active.
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 15
+        default: 0
+
+      adi,excitation-pin-1:
+        description: |
+          Analog input to apply excitation current to while this channel
+          is active.
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 15
+        default: 0
+
+      adi,excitation-current-0-nanoamp:
+        description: |
+          Excitation current in nanoamps to be applied to pin specified in
+          adi,excitation-pin-0 while this channel is active.
+        enum: [0, 100, 10000, 20000, 50000, 100000, 150000, 200000]
+        default: 0
+
+      adi,excitation-current-1-nanoamp:
+        description: |
+          Excitation current in nanoamps to be applied to pin specified in
+          adi,excitation-pin-1 while this channel is active.
+        enum: [0, 100, 10000, 20000, 50000, 100000, 150000, 200000]
+        default: 0
+
+      adi,burnout-current-nanoamp:
+        description: |
+          Burnout current in nanoamps to be applied for this channel.
+        enum: [0, 500, 2000, 4000]
+        default: 0
+
+      adi,buffered-positive:
+        description: Enable buffered mode for positive input.
+        type: boolean
+
+      adi,buffered-negative:
+        description: Enable buffered mode for negative input.
+        type: boolean
+
+    required:
+      - reg
+      - diff-channels
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    spi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      adc@0 {
+        compatible = "adi,ad4130";
+        reg = <0>;
+
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        spi-max-frequency = <5000000>;
+        interrupts = <27 IRQ_TYPE_EDGE_FALLING>;
+        interrupt-parent = <&gpio>;
+
+        channel@0 {
+          reg = <0>;
+
+          adi,reference-select = <2>;
+
+          /* AIN8, AIN9 */
+          diff-channels = <8 9>;
+        };
+
+        channel@1 {
+          reg = <1>;
+
+          adi,reference-select = <2>;
+
+          /* AIN10, AIN11 */
+          diff-channels = <10 11>;
+        };
+
+        channel@2 {
+          reg = <2>;
+
+          adi,reference-select = <2>;
+
+          /* Temperature Sensor, DGND */
+          diff-channels = <16 19>;
+        };
+
+        channel@3 {
+          reg = <3>;
+
+          adi,reference-select = <2>;
+
+          /* Internal reference, DGND */
+          diff-channels = <18 19>;
+        };
+
+        channel@4 {
+          reg = <4>;
+
+          adi,reference-select = <2>;
+
+          /* DGND, DGND */
+          diff-channels = <19 19>;
+        };
+      };
+    };

Documentation/devicetree/bindings/iio/adc/adi,max11410.yaml

+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2022 Analog Devices Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/adi,max11410.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices MAX11410 ADC device driver
+
+maintainers:
+  - Ibrahim Tilki <Ibrahim.Tilki@analog.com>
+
+description: |
+  Bindings for the Analog Devices MAX11410 ADC device. Datasheet can be
+  found here:
+    https://datasheets.maximintegrated.com/en/ds/MAX11410.pdf
+
+properties:
+  compatible:
+    enum:
+      - adi,max11410
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 1
+    maxItems: 2
+
+  interrupt-names:
+    description: Name of the gpio pin of max11410 used for IRQ
+    minItems: 1
+    items:
+      - enum: [gpio0, gpio1]
+      - const: gpio1
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+  avdd-supply:
+    description: Optional avdd supply. Used as reference when no explicit reference supplied.
+
+  vref0p-supply:
+    description: vref0p supply can be used as reference for conversion.
+
+  vref1p-supply:
+    description: vref1p supply can be used as reference for conversion.
+
+  vref2p-supply:
+    description: vref2p supply can be used as reference for conversion.
+
+  vref0n-supply:
+    description: vref0n supply can be used as reference for conversion.
+
+  vref1n-supply:
+    description: vref1n supply can be used as reference for conversion.
+
+  vref2n-supply:
+    description: vref2n supply can be used as reference for conversion.
+
+  spi-max-frequency:
+    maximum: 8000000
+
+patternProperties:
+  "^channel(@[0-9])?$":
+    $ref: adc.yaml
+    type: object
+    description: Represents the external channels which are connected to the ADC.
+
+    properties:
+      reg:
+        description: The channel number in single-ended mode.
+        minimum: 0
+        maximum: 9
+
+      adi,reference:
+        description: |
+          Select the reference source to use when converting on
+          the specific channel. Valid values are:
+          0: VREF0P/VREF0N
+          1: VREF1P/VREF1N
+          2: VREF2P/VREF2N
+          3: AVDD/AGND
+          4: VREF0P/AGND
+          5: VREF1P/AGND
+          6: VREF2P/AGND
+          If this field is left empty, AVDD/AGND is selected.
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1, 2, 3, 4, 5, 6]
+        default: 3
+
+      adi,input-mode:
+        description: |
+          Select signal path of input channels. Valid values are:
+          0: Buffered, low-power, unity-gain path (default)
+          1: Bypass path
+          2: PGA path
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1, 2]
+        default: 0
+
+      diff-channels: true
+
+      bipolar: true
+
+      settling-time-us: true
+
+      adi,buffered-vrefp:
+        description: Enable buffered mode for positive reference.
+        type: boolean
+
+      adi,buffered-vrefn:
+        description: Enable buffered mode for negative reference.
+        type: boolean
+
+    required:
+      - reg
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@0 {
+            reg = <0>;
+            compatible = "adi,max11410";
+            spi-max-frequency = <8000000>;
+
+            interrupt-parent = <&gpio>;
+            interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
+            interrupt-names = "gpio1";
+
+            avdd-supply = <&adc_avdd>;
+
+            vref1p-supply = <&adc_vref1p>;
+            vref1n-supply = <&adc_vref1n>;
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            channel@0 {
+                reg = <0>;
+            };
+
+            channel@1 {
+                reg = <1>;
+                diff-channels = <2 3>;
+                adi,reference = <1>;
+                bipolar;
+                settling-time-us = <100000>;
+            };
+
+            channel@2 {
+                reg = <2>;
+                diff-channels = <7 9>;
+                adi,reference = <5>;
+                adi,input-mode = <2>;
+                settling-time-us = <50000>;
+            };
+        };
+    };

Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml

@@ -22,13 +22,11 @@ properties:
       - items:
           - const: qcom,pms405-adc
           - const: qcom,spmi-adc-rev2
-
-      - items:
-          - enum:
-              - qcom,spmi-vadc
-              - qcom,spmi-adc5
-              - qcom,spmi-adc-rev2
-              - qcom,spmi-adc7
+      - enum:
+          - qcom,spmi-vadc
+          - qcom,spmi-adc5
+          - qcom,spmi-adc-rev2
+          - qcom,spmi-adc7
 
   reg:
     description: VADC base address in the SPMI PMIC register map
@@ -238,42 +236,72 @@ additionalProperties: false
 
 examples:
   - |
-    spmi_bus {
-      #address-cells = <1>;
-      #size-cells = <0>;
-      /* VADC node */
-      pmic_vadc: adc@3100 {
-        compatible = "qcom,spmi-vadc";
-        reg = <0x3100>;
-        interrupts = <0x0 0x31 0x0 0x1>;
+    spmi {
         #address-cells = <1>;
         #size-cells = <0>;
-        #io-channel-cells = <1>;
-
-        /* Channel node */
-        adc-chan@39 {
-          reg = <0x39>;
-          qcom,decimation = <512>;
-          qcom,ratiometric;
-          qcom,hw-settle-time = <200>;
-          qcom,avg-samples = <1>;
-          qcom,pre-scaling = <1 3>;
-        };
-
-        adc-chan@9 {
-          reg = <0x9>;
-        };
-
-        adc-chan@a {
-          reg = <0xa>;
+        /* VADC node */
+        pmic_vadc: adc@3100 {
+            compatible = "qcom,spmi-vadc";
+            reg = <0x3100>;
+            interrupts = <0x0 0x31 0x0 0x1>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+            #io-channel-cells = <1>;
+
+            /* Channel node */
+            adc-chan@39 {
+                reg = <0x39>;
+                qcom,decimation = <512>;
+                qcom,ratiometric;
+                qcom,hw-settle-time = <200>;
+                qcom,avg-samples = <1>;
+                qcom,pre-scaling = <1 3>;
+            };
+
+            adc-chan@9 {
+                reg = <0x9>;
+            };
+
+            adc-chan@a {
+                reg = <0xa>;
+            };
+
+            adc-chan@e {
+                reg = <0xe>;
+            };
+
+            adc-chan@f {
+                reg = <0xf>;
+            };
         };
+    };
 
-        adc-chan@e {
-          reg = <0xe>;
-        };
+  - |
+    #include <dt-bindings/iio/qcom,spmi-adc7-pmk8350.h>
+    #include <dt-bindings/iio/qcom,spmi-adc7-pm8350.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
 
-        adc-chan@f {
-          reg = <0xf>;
+    spmi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        adc@3100 {
+            reg = <0x3100>;
+            compatible = "qcom,spmi-adc7";
+            #address-cells = <1>;
+            #size-cells = <0>;
+            #io-channel-cells = <1>;
+
+            /* Other properties are omitted */
+            xo-therm@44 {
+                reg = <PMK8350_ADC7_AMUX_THM1_100K_PU>;
+                qcom,ratiometric;
+                qcom,hw-settle-time = <200>;
+            };
+
+            conn-therm@47 {
+                reg = <PM8350_ADC7_AMUX_THM4_100K_PU>;
+                qcom,ratiometric;
+                qcom,hw-settle-time = <200>;
+            };
         };
-      };
     };

Documentation/devicetree/bindings/iio/adc/rockchip-saradc.yaml

@@ -22,6 +22,7 @@ properties:
               - rockchip,rk3328-saradc
               - rockchip,rk3568-saradc
               - rockchip,rv1108-saradc
+              - rockchip,rv1126-saradc
           - const: rockchip,rk3399-saradc
 
   reg:

Documentation/devicetree/bindings/iio/adc/st,stm32-adc.yaml

@@ -27,6 +27,7 @@ properties:
       - st,stm32f4-adc-core
       - st,stm32h7-adc-core
       - st,stm32mp1-adc-core
+      - st,stm32mp13-adc-core
 
   reg:
     maxItems: 1
@@ -37,6 +38,7 @@ properties:
         - stm32f4 and stm32h7 share a common ADC interrupt line.
         - stm32mp1 has two separate interrupt lines, one for each ADC within
           ADC block.
+        - stm32mp13 has an interrupt line per ADC block.
     minItems: 1
     maxItems: 2
 
@@ -180,6 +182,33 @@ allOf:
           maximum: 36000000
           default: 36000000
 
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: st,stm32mp13-adc-core
+
+    then:
+      properties:
+        clocks:
+          minItems: 1
+          maxItems: 2
+
+        clock-names:
+          items:
+            - const: bus
+            - const: adc
+          minItems: 1
+
+        interrupts:
+          items:
+            - description: ADC interrupt line
+
+        st,max-clk-rate-hz:
+          minimum: 150000
+          maximum: 75000000
+          default: 75000000
+
 additionalProperties: false
 
 required:
@@ -208,6 +237,7 @@ patternProperties:
           - st,stm32f4-adc
           - st,stm32h7-adc
           - st,stm32mp1-adc
+          - st,stm32mp13-adc
 
       reg:
         description: |
@@ -229,7 +259,7 @@ patternProperties:
       interrupts:
         description: |
           IRQ Line for the ADC instance. Valid values are:
-            - 0 for adc@0
+            - 0 for adc@0 (single adc for stm32mp13)
             - 1 for adc@100
             - 2 for adc@200 (stm32f4 only)
         maxItems: 1
@@ -250,13 +280,14 @@ patternProperties:
       assigned-resolution-bits:
         description: |
           Resolution (bits) to use for conversions:
-            - can be 6, 8, 10 or 12 on stm32f4
+            - can be 6, 8, 10 or 12 on stm32f4 and stm32mp13
             - can be 8, 10, 12, 14 or 16 on stm32h7 and stm32mp1
 
       st,adc-channels:
         description: |
           List of single-ended channels muxed for this ADC. It can have up to:
             - 16 channels, numbered from 0 to 15 (for in0..in15) on stm32f4
+            - 19 channels, numbered from 0 to 18 (for in0..in18) on stm32mp13.
             - 20 channels, numbered from 0 to 19 (for in0..in19) on stm32h7 and
               stm32mp1.
         $ref: /schemas/types.yaml#/definitions/uint32-array
@@ -322,7 +353,7 @@ patternProperties:
           label:
             description: |
               Unique name to identify which channel this is.
-              Reserved label names "vddcore", "vrefint" and "vbat"
+              Reserved label names "vddcore", "vddcpu", "vddq_ddr", "vrefint" and "vbat"
               are used to identify internal channels with matching names.
 
           diff-channels:
@@ -419,6 +450,37 @@ patternProperties:
               items:
                 minimum: 40
 
+
+      - if:
+          properties:
+            compatible:
+              contains:
+                const: st,stm32mp13-adc
+
+        then:
+          properties:
+            reg:
+              const: 0x0
+
+            interrupts:
+              const: 0
+
+            assigned-resolution-bits:
+              enum: [6, 8, 10, 12]
+              default: 12
+
+            st,adc-channels:
+              minItems: 1
+              maxItems: 19
+              items:
+                minimum: 0
+                maximum: 18
+
+            st,min-sample-time-nsecs:
+              minItems: 1
+              maxItems: 19
+              items:
+                minimum: 40
     additionalProperties: false
 
     required:

Documentation/devicetree/bindings/iio/addac/adi,ad74413r.yaml

@@ -58,8 +58,6 @@ required:
   - spi-cpol
   - refin-supply
 
-additionalProperties: false
-
 patternProperties:
   "^channel@[0-3]$":
     type: object
@@ -103,6 +101,11 @@ patternProperties:
     required:
       - reg
 
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
 examples:
   - |
     #include <dt-bindings/gpio/gpio.h>
@@ -113,10 +116,7 @@ examples:
       #address-cells = <1>;
       #size-cells = <0>;
 
-      cs-gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
-      status = "okay";
-
-      ad74413r@0 {
+      addac@0 {
         compatible = "adi,ad74413r";
         reg = <0>;
         spi-max-frequency = <1000000>;

Documentation/devicetree/bindings/iio/dac/adi,ad5758.yaml

@@ -102,8 +102,7 @@ allOf:
   - if:
       properties:
         adi,dc-dc-mode:
-          contains:
-            enum: [1, 3]
+          enum: [1, 3]
     then:
       properties:
         adi,range-microvolt: false

Documentation/devicetree/bindings/iio/dac/adi,ad5766.yaml

@@ -8,7 +8,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Analog Devices AD5766 DAC device driver
 
 maintainers:
-  - Cristian Pop <cristian.pop@analog.com>
+  - Nuno Sá <nuno.sa@analog.com>
 
 description: |
   Bindings for the Analog Devices AD5766 current DAC device. Datasheet can be

Documentation/devicetree/bindings/iio/frequency/adi,adf4350.yaml

@@ -160,13 +160,16 @@ properties:
       2: +2dBm
       3: +5dBm
 
-additionalProperties: false
-
 required:
   - compatible
   - reg
   - clocks
 
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
 examples:
   - |
     spi {

Documentation/devicetree/bindings/iio/frequency/adi,admv1013.yaml

@@ -70,7 +70,10 @@ required:
   - clock-names
   - vcm-supply
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |

Documentation/devicetree/bindings/iio/frequency/adi,admv1014.yaml

@@ -104,7 +104,10 @@ required:
   - clock-names
   - vcm-supply
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |

Documentation/devicetree/bindings/iio/frequency/adi,admv4420.yaml

@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: ADMV4420 K Band Downconverter
 
 maintainers:
-  - Cristian Pop <cristian.pop@analog.com>
+  - Nuno Sá <nuno.sa@analog.com>
 
 description:
   The ADMV4420 is a highly integrated, double balanced, active
@@ -37,7 +37,11 @@ required:
   - compatible
   - reg
 
-additionalProperties: false
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |

Documentation/devicetree/bindings/iio/frequency/adi,adrf6780.yaml

@@ -113,7 +113,10 @@ required:
   - clocks
   - clock-names
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |

Documentation/devicetree/bindings/iio/gyroscope/adi,adxrs290.yaml

@@ -38,7 +38,10 @@ required:
   - spi-cpol
   - spi-cpha
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |

Documentation/devicetree/bindings/iio/gyroscope/nxp,fxas21002c.yaml

@@ -56,7 +56,10 @@ required:
   - compatible
   - reg
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |

Documentation/devicetree/bindings/iio/imu/adi,adis16475.yaml

@@ -79,6 +79,7 @@ required:
   - spi-cpol
 
 allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
   - if:
       properties:
         compatible:
@@ -107,7 +108,7 @@ allOf:
       dependencies:
         adi,sync-mode: [ clocks ]
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |

Documentation/devicetree/bindings/iio/imu/invensense,icm42600.yaml

@@ -31,6 +31,7 @@ properties:
       - invensense,icm42602
       - invensense,icm42605
       - invensense,icm42622
+      - invensense,icm42631
 
   reg:
     maxItems: 1

Documentation/devicetree/bindings/iio/imu/st,lsm6dsx.yaml

@@ -32,12 +32,16 @@ properties:
           - st,lsm6dsrx
           - st,lsm6dst
           - st,lsm6dsop
+          - st,lsm6dsv
       - items:
           - const: st,asm330lhhx
           - const: st,lsm6dsr
       - items:
           - const: st,lsm6dstx
           - const: st,lsm6dst
+      - items:
+          - const: st,lsm6dsv16x
+          - const: st,lsm6dsv
 
   reg:
     maxItems: 1

Documentation/devicetree/bindings/iio/pressure/meas,ms5611.yaml

@@ -30,7 +30,10 @@ required:
   - compatible
   - reg
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
@@ -52,6 +55,7 @@ examples:
             compatible = "meas,ms5611";
             reg = <0>;
             vdd-supply = <&ldo_3v3_gnss>;
+            spi-max-frequency = <20000000>;
         };
     };
 ...

Documentation/devicetree/bindings/iio/pressure/murata,zpa2326.yaml

@@ -33,7 +33,10 @@ required:
   - compatible
   - reg
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |

Documentation/devicetree/bindings/iio/proximity/ams,as3935.yaml

@@ -49,7 +49,10 @@ required:
   - spi-cpha
   - interrupts
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |

Documentation/devicetree/bindings/iio/resolver/adi,ad2s90.yaml

@@ -33,8 +33,6 @@ properties:
 
   spi-cpha: true
 
-additionalProperties: false
-
 required:
   - compatible
   - reg
@@ -43,6 +41,11 @@ dependencies:
   spi-cpol: [ spi-cpha ]
   spi-cpha: [ spi-cpol ]
 
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
 examples:
   - |
     spi {

MAINTAINERS

@@ -1117,6 +1117,15 @@ T:	git git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net.git
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next.git
 F:	drivers/net/amt.c
 
+ANALOG DEVICES INC AD4130 DRIVER
+M:	Cosmin Tanislav <cosmin.tanislav@analog.com>
+L:	linux-iio@vger.kernel.org
+S:	Supported
+W:	http://ez.analog.com/community/linux-device-drivers
+F:	Documentation/ABI/testing/sysfs-bus-iio-adc-ad4130
+F:	Documentation/devicetree/bindings/iio/adc/adi,ad4130.yaml
+F:	drivers/iio/adc/ad4130.c
+
 ANALOG DEVICES INC AD7192 DRIVER
 M:	Alexandru Tachici <alexandru.tachici@analog.com>
 L:	linux-iio@vger.kernel.org
@@ -11446,6 +11455,12 @@ F:	drivers/mfd/khadas-mcu.c
 F:	include/linux/mfd/khadas-mcu.h
 F:	drivers/thermal/khadas_mcu_fan.c
 
+KIONIX/ROHM KX022A ACCELEROMETER
+M:	Matti Vaittinen <mazziesaccount@gmail.com>
+L:	linux-iio@vger.kernel.org
+S:	Supported
+F:	drivers/iio/accel/kionix-kx022a*
+
 KMEMLEAK
 M:	Catalin Marinas <catalin.marinas@arm.com>
 S:	Maintained

drivers/i2c/i2c-core-base.c

@@ -2236,6 +2236,20 @@ int i2c_get_device_id(const struct i2c_client *client,
 }
 EXPORT_SYMBOL_GPL(i2c_get_device_id);
 
+/**
+ * i2c_client_get_device_id - get the driver match table entry of a device
+ * @client: the device to query. The device must be bound to a driver
+ *
+ * Returns a pointer to the matching entry if found, NULL otherwise.
+ */
+const struct i2c_device_id *i2c_client_get_device_id(const struct i2c_client *client)
+{
+	const struct i2c_driver *drv = to_i2c_driver(client->dev.driver);
+
+	return i2c_match_id(drv->id_table, client);
+}
+EXPORT_SYMBOL_GPL(i2c_client_get_device_id);
+
 /* ----------------------------------------------------
  * the i2c address scanning function
  * Will not work for 10-bit addresses!

drivers/iio/TODO

@@ -7,9 +7,6 @@ tree
   - ABI Documentation
   - Audit driviers/iio/staging/Documentation
 
-- Replace iio_dev->mlock by either a local lock or use
-iio_claim_direct.(Requires analysis of the purpose of the lock.)
-
 - Converting drivers from device tree centric to more generic
 property handlers.
 

drivers/iio/accel/Kconfig

@@ -409,6 +409,27 @@ config IIO_ST_ACCEL_SPI_3AXIS
 	  To compile this driver as a module, choose M here. The module
 	  will be called st_accel_spi.
 
+config IIO_KX022A
+	tristate
+
+config IIO_KX022A_SPI
+	tristate "Kionix KX022A tri-axis digital accelerometer SPI interface"
+	depends on SPI
+	select IIO_KX022A
+	select REGMAP_SPI
+	help
+	  Enable support for the Kionix KX022A digital tri-axis
+	  accelerometer connected to I2C interface.
+
+config IIO_KX022A_I2C
+	tristate "Kionix KX022A tri-axis digital accelerometer I2C interface"
+	depends on I2C
+	select IIO_KX022A
+	select REGMAP_I2C
+	help
+	  Enable support for the Kionix KX022A digital tri-axis
+	  accelerometer connected to I2C interface.
+
 config KXSD9
 	tristate "Kionix KXSD9 Accelerometer Driver"
 	select IIO_BUFFER

drivers/iio/accel/Makefile

@@ -40,6 +40,9 @@ obj-$(CONFIG_FXLS8962AF)	+= fxls8962af-core.o
 obj-$(CONFIG_FXLS8962AF_I2C)	+= fxls8962af-i2c.o
 obj-$(CONFIG_FXLS8962AF_SPI)	+= fxls8962af-spi.o
 obj-$(CONFIG_HID_SENSOR_ACCEL_3D) += hid-sensor-accel-3d.o
+obj-$(CONFIG_IIO_KX022A)	+= kionix-kx022a.o
+obj-$(CONFIG_IIO_KX022A_I2C)	+= kionix-kx022a-i2c.o
+obj-$(CONFIG_IIO_KX022A_SPI)	+= kionix-kx022a-spi.o
 obj-$(CONFIG_KXCJK1013) += kxcjk-1013.o
 obj-$(CONFIG_KXSD9)	+= kxsd9.o
 obj-$(CONFIG_KXSD9_SPI)	+= kxsd9-spi.o

drivers/iio/accel/adxl355.h

@@ -10,12 +10,30 @@
 
 #include <linux/regmap.h>
 
+enum adxl355_device_type {
+	ADXL355,
+	ADXL359,
+};
+
+struct adxl355_fractional_type {
+	int integer;
+	int decimal;
+};
+
 struct device;
 
+struct adxl355_chip_info {
+	const char			*name;
+	u8				part_id;
+	struct adxl355_fractional_type	accel_scale;
+	struct adxl355_fractional_type	temp_offset;
+};
+
 extern const struct regmap_access_table adxl355_readable_regs_tbl;
 extern const struct regmap_access_table adxl355_writeable_regs_tbl;
+extern const struct adxl355_chip_info adxl35x_chip_info[];
 
 int adxl355_core_probe(struct device *dev, struct regmap *regmap,
-		       const char *name);
+		       const struct adxl355_chip_info *chip_info);
 
 #endif /* _ADXL355_H_ */

drivers/iio/accel/adxl355_core.c

@@ -60,6 +60,7 @@
 #define ADXL355_DEVID_AD_VAL		0xAD
 #define ADXL355_DEVID_MST_VAL		0x1D
 #define ADXL355_PARTID_VAL		0xED
+#define ADXL359_PARTID_VAL		0xE9
 #define ADXL355_RESET_CODE		0x52
 
 static const struct regmap_range adxl355_read_reg_range[] = {
@@ -83,6 +84,60 @@ const struct regmap_access_table adxl355_writeable_regs_tbl = {
 };
 EXPORT_SYMBOL_NS_GPL(adxl355_writeable_regs_tbl, IIO_ADXL355);
 
+const struct adxl355_chip_info adxl35x_chip_info[] = {
+	[ADXL355] = {
+		.name = "adxl355",
+		.part_id = ADXL355_PARTID_VAL,
+		/*
+		 * At +/- 2g with 20-bit resolution, scale is given in datasheet
+		 * as 3.9ug/LSB = 0.0000039 * 9.80665 = 0.00003824593 m/s^2.
+		 */
+		.accel_scale = {
+			.integer = 0,
+			.decimal = 38245,
+		},
+		/*
+		 * The datasheet defines an intercept of 1885 LSB at 25 degC
+		 * and a slope of -9.05 LSB/C. The following formula can be used
+		 * to find the temperature:
+		 * Temp = ((RAW - 1885)/(-9.05)) + 25 but this doesn't follow
+		 * the format of the IIO which is Temp = (RAW + OFFSET) * SCALE.
+		 * Hence using some rearranging we get the scale as -110.497238
+		 * and offset as -2111.25.
+		 */
+		.temp_offset = {
+			.integer =  -2111,
+			.decimal = 250000,
+		},
+	},
+	[ADXL359] = {
+		.name = "adxl359",
+		.part_id = ADXL359_PARTID_VAL,
+		/*
+		 * At +/- 10g with 20-bit resolution, scale is given in datasheet
+		 * as 19.5ug/LSB = 0.0000195 * 9.80665 = 0.0.00019122967 m/s^2.
+		 */
+		.accel_scale = {
+			.integer = 0,
+			.decimal = 191229,
+		},
+		/*
+		 * The datasheet defines an intercept of 1852 LSB at 25 degC
+		 * and a slope of -9.05 LSB/C. The following formula can be used
+		 * to find the temperature:
+		 * Temp = ((RAW - 1852)/(-9.05)) + 25 but this doesn't follow
+		 * the format of the IIO which is Temp = (RAW + OFFSET) * SCALE.
+		 * Hence using some rearranging we get the scale as -110.497238
+		 * and offset as -2079.25.
+		 */
+		.temp_offset = {
+			.integer = -2079,
+			.decimal = 250000,
+		},
+	},
+};
+EXPORT_SYMBOL_NS_GPL(adxl35x_chip_info, IIO_ADXL355);
+
 enum adxl355_op_mode {
 	ADXL355_MEASUREMENT,
 	ADXL355_STANDBY,
@@ -162,6 +217,7 @@ static const struct adxl355_chan_info adxl355_chans[] = {
 };
 
 struct adxl355_data {
+	const struct adxl355_chip_info *chip_info;
 	struct regmap *regmap;
 	struct device *dev;
 	struct mutex lock; /* lock to protect op_mode */
@@ -262,10 +318,8 @@ static int adxl355_setup(struct adxl355_data *data)
 	if (ret)
 		return ret;
 
-	if (regval != ADXL355_PARTID_VAL) {
-		dev_err(data->dev, "Invalid DEV ID 0x%02x\n", regval);
-		return -ENODEV;
-	}
+	if (regval != ADXL355_PARTID_VAL)
+		dev_warn(data->dev, "Invalid DEV ID 0x%02x\n", regval);
 
 	/*
 	 * Perform a software reset to make sure the device is in a consistent
@@ -458,33 +512,25 @@ static int adxl355_read_raw(struct iio_dev *indio_dev,
 
 	case IIO_CHAN_INFO_SCALE:
 		switch (chan->type) {
-		/*
-		 * The datasheet defines an intercept of 1885 LSB at 25 degC
-		 * and a slope of -9.05 LSB/C. The following formula can be used
-		 * to find the temperature:
-		 * Temp = ((RAW - 1885)/(-9.05)) + 25 but this doesn't follow
-		 * the format of the IIO which is Temp = (RAW + OFFSET) * SCALE.
-		 * Hence using some rearranging we get the scale as -110.497238
-		 * and offset as -2111.25.
-		 */
 		case IIO_TEMP:
+			/*
+			 * Temperature scale is -110.497238.
+			 * See the detailed explanation in adxl35x_chip_info
+			 * definition above.
+			 */
 			*val = -110;
 			*val2 = 497238;
 			return IIO_VAL_INT_PLUS_MICRO;
-		/*
-		 * At +/- 2g with 20-bit resolution, scale is given in datasheet
-		 * as 3.9ug/LSB = 0.0000039 * 9.80665 = 0.00003824593 m/s^2.
-		 */
 		case IIO_ACCEL:
-			*val = 0;
-			*val2 = 38245;
+			*val = data->chip_info->accel_scale.integer;
+			*val2 = data->chip_info->accel_scale.decimal;
 			return IIO_VAL_INT_PLUS_NANO;
 		default:
 			return -EINVAL;
 		}
 	case IIO_CHAN_INFO_OFFSET:
-		*val = -2111;
-		*val2 = 250000;
+		*val = data->chip_info->temp_offset.integer;
+		*val2 = data->chip_info->temp_offset.decimal;
 		return IIO_VAL_INT_PLUS_MICRO;
 	case IIO_CHAN_INFO_CALIBBIAS:
 		*val = sign_extend32(data->calibbias[chan->address], 15);
@@ -707,7 +753,7 @@ static int adxl355_probe_trigger(struct iio_dev *indio_dev, int irq)
 }
 
 int adxl355_core_probe(struct device *dev, struct regmap *regmap,
-		       const char *name)
+		       const struct adxl355_chip_info *chip_info)
 {
 	struct adxl355_data *data;
 	struct iio_dev *indio_dev;
@@ -722,9 +768,10 @@ int adxl355_core_probe(struct device *dev, struct regmap *regmap,
 	data->regmap = regmap;
 	data->dev = dev;
 	data->op_mode = ADXL355_STANDBY;
+	data->chip_info = chip_info;
 	mutex_init(&data->lock);
 
-	indio_dev->name = name;
+	indio_dev->name = chip_info->name;
 	indio_dev->info = &adxl355_info;
 	indio_dev->modes = INDIO_DIRECT_MODE;
 	indio_dev->channels = adxl355_channels;

drivers/iio/accel/adxl355_i2c.c

@@ -23,6 +23,20 @@ static const struct regmap_config adxl355_i2c_regmap_config = {
 static int adxl355_i2c_probe(struct i2c_client *client)
 {
 	struct regmap *regmap;
+	const struct adxl355_chip_info *chip_data;
+	const struct i2c_device_id *adxl355;
+
+	chip_data = device_get_match_data(&client->dev);
+	if (!chip_data) {
+		adxl355 = to_i2c_driver(client->dev.driver)->id_table;
+		if (!adxl355)
+			return -EINVAL;
+
+		chip_data = (void *)i2c_match_id(adxl355, client)->driver_data;
+
+		if (!chip_data)
+			return -EINVAL;
+	}
 
 	regmap = devm_regmap_init_i2c(client, &adxl355_i2c_regmap_config);
 	if (IS_ERR(regmap)) {
@@ -32,17 +46,19 @@ static int adxl355_i2c_probe(struct i2c_client *client)
 		return PTR_ERR(regmap);
 	}
 
-	return adxl355_core_probe(&client->dev, regmap, client->name);
+	return adxl355_core_probe(&client->dev, regmap, chip_data);
 }
 
 static const struct i2c_device_id adxl355_i2c_id[] = {
-	{ "adxl355", 0 },
+	{ "adxl355", (kernel_ulong_t)&adxl35x_chip_info[ADXL355] },
+	{ "adxl359", (kernel_ulong_t)&adxl35x_chip_info[ADXL359] },
 	{ }
 };
 MODULE_DEVICE_TABLE(i2c, adxl355_i2c_id);
 
 static const struct of_device_id adxl355_of_match[] = {
-	{ .compatible = "adi,adxl355" },
+	{ .compatible = "adi,adxl355", .data = &adxl35x_chip_info[ADXL355] },
+	{ .compatible = "adi,adxl359", .data = &adxl35x_chip_info[ADXL359] },
 	{ }
 };
 MODULE_DEVICE_TABLE(of, adxl355_of_match);

drivers/iio/accel/adxl355_spi.c

@@ -9,6 +9,7 @@
 #include <linux/mod_devicetable.h>
 #include <linux/regmap.h>
 #include <linux/spi/spi.h>
+#include <linux/property.h>
 
 #include "adxl355.h"
 
@@ -24,9 +25,17 @@ static const struct regmap_config adxl355_spi_regmap_config = {
 
 static int adxl355_spi_probe(struct spi_device *spi)
 {
-	const struct spi_device_id *id = spi_get_device_id(spi);
+	const struct adxl355_chip_info *chip_data;
 	struct regmap *regmap;
 
+	chip_data = device_get_match_data(&spi->dev);
+	if (!chip_data) {
+		chip_data = (void *)spi_get_device_id(spi)->driver_data;
+
+		if (!chip_data)
+			return -EINVAL;
+	}
+
 	regmap = devm_regmap_init_spi(spi, &adxl355_spi_regmap_config);
 	if (IS_ERR(regmap)) {
 		dev_err(&spi->dev, "Error initializing spi regmap: %ld\n",
@@ -35,17 +44,19 @@ static int adxl355_spi_probe(struct spi_device *spi)
 		return PTR_ERR(regmap);
 	}
 
-	return adxl355_core_probe(&spi->dev, regmap, id->name);
+	return adxl355_core_probe(&spi->dev, regmap, chip_data);
 }
 
 static const struct spi_device_id adxl355_spi_id[] = {
-	{ "adxl355", 0 },
+	{ "adxl355", (kernel_ulong_t)&adxl35x_chip_info[ADXL355] },
+	{ "adxl359", (kernel_ulong_t)&adxl35x_chip_info[ADXL359] },
 	{ }
 };
 MODULE_DEVICE_TABLE(spi, adxl355_spi_id);
 
 static const struct of_device_id adxl355_of_match[] = {
-	{ .compatible = "adi,adxl355" },
+	{ .compatible = "adi,adxl355", .data = &adxl35x_chip_info[ADXL355] },
+	{ .compatible = "adi,adxl359", .data = &adxl35x_chip_info[ADXL359] },
 	{ }
 };
 MODULE_DEVICE_TABLE(of, adxl355_of_match);

drivers/iio/accel/adxl367.c

@@ -160,8 +160,6 @@ struct adxl367_state {
 	struct device			*dev;
 	struct regmap			*regmap;
 
-	struct regulator_bulk_data	regulators[2];
-
 	/*
 	 * Synchronize access to members of driver state, and ensure atomicity
 	 * of consecutive regmap operations.
@@ -1185,32 +1183,19 @@ static ssize_t adxl367_get_fifo_watermark(struct device *dev,
 	return sysfs_emit(buf, "%d\n", fifo_watermark);
 }
 
-static ssize_t hwfifo_watermark_min_show(struct device *dev,
-					 struct device_attribute *attr,
-					 char *buf)
-{
-	return sysfs_emit(buf, "%s\n", "1");
-}
-
-static ssize_t hwfifo_watermark_max_show(struct device *dev,
-					 struct device_attribute *attr,
-					 char *buf)
-{
-	return sysfs_emit(buf, "%s\n", __stringify(ADXL367_FIFO_MAX_WATERMARK));
-}
-
-static IIO_DEVICE_ATTR_RO(hwfifo_watermark_min, 0);
-static IIO_DEVICE_ATTR_RO(hwfifo_watermark_max, 0);
+IIO_STATIC_CONST_DEVICE_ATTR(hwfifo_watermark_min, "1");
+IIO_STATIC_CONST_DEVICE_ATTR(hwfifo_watermark_max,
+			     __stringify(ADXL367_FIFO_MAX_WATERMARK));
 static IIO_DEVICE_ATTR(hwfifo_watermark, 0444,
 		       adxl367_get_fifo_watermark, NULL, 0);
 static IIO_DEVICE_ATTR(hwfifo_enabled, 0444,
 		       adxl367_get_fifo_enabled, NULL, 0);
 
-static const struct attribute *adxl367_fifo_attributes[] = {
-	&iio_dev_attr_hwfifo_watermark_min.dev_attr.attr,
-	&iio_dev_attr_hwfifo_watermark_max.dev_attr.attr,
-	&iio_dev_attr_hwfifo_watermark.dev_attr.attr,
-	&iio_dev_attr_hwfifo_enabled.dev_attr.attr,
+static const struct iio_dev_attr *adxl367_fifo_attributes[] = {
+	&iio_dev_attr_hwfifo_watermark_min,
+	&iio_dev_attr_hwfifo_watermark_max,
+	&iio_dev_attr_hwfifo_watermark,
+	&iio_dev_attr_hwfifo_enabled,
 	NULL,
 };
 
@@ -1487,16 +1472,10 @@ static int adxl367_setup(struct adxl367_state *st)
 	return adxl367_set_measure_en(st, true);
 }
 
-static void adxl367_disable_regulators(void *data)
-{
-	struct adxl367_state *st = data;
-
-	regulator_bulk_disable(ARRAY_SIZE(st->regulators), st->regulators);
-}
-
 int adxl367_probe(struct device *dev, const struct adxl367_ops *ops,
 		  void *context, struct regmap *regmap, int irq)
 {
+	static const char * const regulator_names[] = { "vdd", "vddio" };
 	struct iio_dev *indio_dev;
 	struct adxl367_state *st;
 	int ret;
@@ -1520,25 +1499,13 @@ int adxl367_probe(struct device *dev, const struct adxl367_ops *ops,
 	indio_dev->info = &adxl367_info;
 	indio_dev->modes = INDIO_DIRECT_MODE;
 
-	st->regulators[0].supply = "vdd";
-	st->regulators[1].supply = "vddio";
-
-	ret = devm_regulator_bulk_get(st->dev, ARRAY_SIZE(st->regulators),
-				      st->regulators);
+	ret = devm_regulator_bulk_get_enable(st->dev,
+					     ARRAY_SIZE(regulator_names),
+					     regulator_names);
 	if (ret)
 		return dev_err_probe(st->dev, ret,
 				     "Failed to get regulators\n");
 
-	ret = regulator_bulk_enable(ARRAY_SIZE(st->regulators), st->regulators);
-	if (ret)
-		return dev_err_probe(st->dev, ret,
-				     "Failed to enable regulators\n");
-
-	ret = devm_add_action_or_reset(st->dev, adxl367_disable_regulators, st);
-	if (ret)
-		return dev_err_probe(st->dev, ret,
-				     "Failed to add regulators disable action\n");
-
 	ret = regmap_write(st->regmap, ADXL367_REG_RESET, ADXL367_RESET_CODE);
 	if (ret)
 		return ret;

drivers/iio/accel/adxl367_i2c.c

@@ -41,8 +41,7 @@ static const struct adxl367_ops adxl367_i2c_ops = {
 	.read_fifo = adxl367_i2c_read_fifo,
 };
 
-static int adxl367_i2c_probe(struct i2c_client *client,
-			     const struct i2c_device_id *id)
+static int adxl367_i2c_probe(struct i2c_client *client)
 {
 	struct adxl367_i2c_state *st;
 	struct regmap *regmap;
@@ -78,7 +77,7 @@ static struct i2c_driver adxl367_i2c_driver = {
 		.name = "adxl367_i2c",
 		.of_match_table = adxl367_of_match,
 	},
-	.probe = adxl367_i2c_probe,
+	.probe_new = adxl367_i2c_probe,
 	.id_table = adxl367_i2c_id,
 };
 

drivers/iio/accel/adxl372.c

@@ -998,32 +998,19 @@ static ssize_t adxl372_get_fifo_watermark(struct device *dev,
 	return sprintf(buf, "%d\n", st->watermark);
 }
 
-static ssize_t hwfifo_watermark_min_show(struct device *dev,
-					 struct device_attribute *attr,
-					 char *buf)
-{
-	return sysfs_emit(buf, "%s\n", "1");
-}
-
-static ssize_t hwfifo_watermark_max_show(struct device *dev,
-					 struct device_attribute *attr,
-					 char *buf)
-{
-	return sysfs_emit(buf, "%s\n", __stringify(ADXL372_FIFO_SIZE));
-}
-
-static IIO_DEVICE_ATTR_RO(hwfifo_watermark_min, 0);
-static IIO_DEVICE_ATTR_RO(hwfifo_watermark_max, 0);
+IIO_STATIC_CONST_DEVICE_ATTR(hwfifo_watermark_min, "1");
+IIO_STATIC_CONST_DEVICE_ATTR(hwfifo_watermark_max,
+			     __stringify(ADXL372_FIFO_SIZE));
 static IIO_DEVICE_ATTR(hwfifo_watermark, 0444,
 		       adxl372_get_fifo_watermark, NULL, 0);
 static IIO_DEVICE_ATTR(hwfifo_enabled, 0444,
 		       adxl372_get_fifo_enabled, NULL, 0);
 
-static const struct attribute *adxl372_fifo_attributes[] = {
-	&iio_dev_attr_hwfifo_watermark_min.dev_attr.attr,
-	&iio_dev_attr_hwfifo_watermark_max.dev_attr.attr,
-	&iio_dev_attr_hwfifo_watermark.dev_attr.attr,
-	&iio_dev_attr_hwfifo_enabled.dev_attr.attr,
+static const struct iio_dev_attr *adxl372_fifo_attributes[] = {
+	&iio_dev_attr_hwfifo_watermark_min,
+	&iio_dev_attr_hwfifo_watermark_max,
+	&iio_dev_attr_hwfifo_watermark,
+	&iio_dev_attr_hwfifo_enabled,
 	NULL,
 };
 

drivers/iio/accel/bma400_core.c

@@ -874,14 +874,10 @@ static int bma400_init(struct bma400_data *data)
 	ret = devm_regulator_bulk_get(data->dev,
 				      ARRAY_SIZE(data->regulators),
 				      data->regulators);
-	if (ret) {
-		if (ret != -EPROBE_DEFER)
-			dev_err(data->dev,
-				"Failed to get regulators: %d\n",
-				ret);
+	if (ret)
+		return dev_err_probe(data->dev, ret, "Failed to get regulators: %d\n",
+				     ret);
 
-		return ret;
-	}
 	ret = regulator_bulk_enable(ARRAY_SIZE(data->regulators),
 				    data->regulators);
 	if (ret) {

drivers/iio/accel/bmc150-accel-core.c

@@ -925,32 +925,19 @@ static const struct iio_chan_spec_ext_info bmc150_accel_ext_info[] = {
 	{ }
 };
 
-static ssize_t hwfifo_watermark_min_show(struct device *dev,
-					 struct device_attribute *attr,
-					 char *buf)
-{
-	return sysfs_emit(buf, "%s\n", "1");
-}
-
-static ssize_t hwfifo_watermark_max_show(struct device *dev,
-					 struct device_attribute *attr,
-					 char *buf)
-{
-	return sysfs_emit(buf, "%s\n", __stringify(BMC150_ACCEL_FIFO_LENGTH));
-}
-
-static IIO_DEVICE_ATTR_RO(hwfifo_watermark_min, 0);
-static IIO_DEVICE_ATTR_RO(hwfifo_watermark_max, 0);
+IIO_STATIC_CONST_DEVICE_ATTR(hwfifo_watermark_min, "1");
+IIO_STATIC_CONST_DEVICE_ATTR(hwfifo_watermark_max,
+			     __stringify(BMC150_ACCEL_FIFO_LENGTH));
 static IIO_DEVICE_ATTR(hwfifo_enabled, S_IRUGO,
 		       bmc150_accel_get_fifo_state, NULL, 0);
 static IIO_DEVICE_ATTR(hwfifo_watermark, S_IRUGO,
 		       bmc150_accel_get_fifo_watermark, NULL, 0);
 
-static const struct attribute *bmc150_accel_fifo_attributes[] = {
-	&iio_dev_attr_hwfifo_watermark_min.dev_attr.attr,
-	&iio_dev_attr_hwfifo_watermark_max.dev_attr.attr,
-	&iio_dev_attr_hwfifo_watermark.dev_attr.attr,
-	&iio_dev_attr_hwfifo_enabled.dev_attr.attr,
+static const struct iio_dev_attr *bmc150_accel_fifo_attributes[] = {
+	&iio_dev_attr_hwfifo_watermark_min,
+	&iio_dev_attr_hwfifo_watermark_max,
+	&iio_dev_attr_hwfifo_watermark,
+	&iio_dev_attr_hwfifo_enabled,
 	NULL,
 };
 
@@ -1678,7 +1665,7 @@ int bmc150_accel_core_probe(struct device *dev, struct regmap *regmap, int irq,
 			    enum bmc150_type type, const char *name,
 			    bool block_supported)
 {
-	const struct attribute **fifo_attrs;
+	const struct iio_dev_attr **fifo_attrs;
 	struct bmc150_accel_data *data;
 	struct iio_dev *indio_dev;
 	int ret;

drivers/iio/accel/da311.c

@@ -217,8 +217,7 @@ static void da311_disable(void *client)
 	da311_enable(client, false);
 }
 
-static int da311_probe(struct i2c_client *client,
-			const struct i2c_device_id *id)
+static int da311_probe(struct i2c_client *client)
 {
 	int ret;
 	struct iio_dev *indio_dev;
@@ -279,7 +278,7 @@ static struct i2c_driver da311_driver = {
 		.name = "da311",
 		.pm = pm_sleep_ptr(&da311_pm_ops),
 	},
-	.probe		= da311_probe,
+	.probe_new	= da311_probe,
 	.id_table	= da311_i2c_id,
 };
 

drivers/iio/accel/dmard06.c

@@ -125,8 +125,7 @@ static const struct iio_info dmard06_info = {
 	.read_raw	= dmard06_read_raw,
 };
 
-static int dmard06_probe(struct i2c_client *client,
-			const struct i2c_device_id *id)
+static int dmard06_probe(struct i2c_client *client)
 {
 	int ret;
 	struct iio_dev *indio_dev;
@@ -218,7 +217,7 @@ static const struct of_device_id dmard06_of_match[] = {
 MODULE_DEVICE_TABLE(of, dmard06_of_match);
 
 static struct i2c_driver dmard06_driver = {
-	.probe = dmard06_probe,
+	.probe_new = dmard06_probe,
 	.id_table = dmard06_id,
 	.driver = {
 		.name = DMARD06_DRV_NAME,

drivers/iio/accel/dmard09.c

@@ -88,8 +88,7 @@ static const struct iio_info dmard09_info = {
 	.read_raw	= dmard09_read_raw,
 };
 
-static int dmard09_probe(struct i2c_client *client,
-			const struct i2c_device_id *id)
+static int dmard09_probe(struct i2c_client *client)
 {
 	int ret;
 	struct iio_dev *indio_dev;
@@ -136,7 +135,7 @@ static struct i2c_driver dmard09_driver = {
 	.driver = {
 		.name = DMARD09_DRV_NAME
 	},
-	.probe = dmard09_probe,
+	.probe_new = dmard09_probe,
 	.id_table = dmard09_id,
 };
 

drivers/iio/accel/dmard10.c

@@ -175,8 +175,7 @@ static void dmard10_shutdown_cleanup(void *client)
 	dmard10_shutdown(client);
 }
 
-static int dmard10_probe(struct i2c_client *client,
-			const struct i2c_device_id *id)
+static int dmard10_probe(struct i2c_client *client)
 {
 	int ret;
 	struct iio_dev *indio_dev;
@@ -242,7 +241,7 @@ static struct i2c_driver dmard10_driver = {
 		.name = "dmard10",
 		.pm = pm_sleep_ptr(&dmard10_pm_ops),
 	},
-	.probe		= dmard10_probe,
+	.probe_new	= dmard10_probe,
 	.id_table	= dmard10_i2c_id,
 };
 

drivers/iio/accel/fxls8962af-core.c

@@ -159,7 +159,6 @@ struct fxls8962af_chip_info {
 struct fxls8962af_data {
 	struct regmap *regmap;
 	const struct fxls8962af_chip_info *chip_info;
-	struct regulator *vdd_reg;
 	struct {
 		__le16 channels[3];
 		s64 ts __aligned(8);
@@ -1051,13 +1050,6 @@ static irqreturn_t fxls8962af_interrupt(int irq, void *p)
 	return IRQ_NONE;
 }
 
-static void fxls8962af_regulator_disable(void *data_ptr)
-{
-	struct fxls8962af_data *data = data_ptr;
-
-	regulator_disable(data->vdd_reg);
-}
-
 static void fxls8962af_pm_disable(void *dev_ptr)
 {
 	struct device *dev = dev_ptr;
@@ -1171,20 +1163,10 @@ int fxls8962af_core_probe(struct device *dev, struct regmap *regmap, int irq)
 	if (ret)
 		return ret;
 
-	data->vdd_reg = devm_regulator_get(dev, "vdd");
-	if (IS_ERR(data->vdd_reg))
-		return dev_err_probe(dev, PTR_ERR(data->vdd_reg),
-				     "Failed to get vdd regulator\n");
-
-	ret = regulator_enable(data->vdd_reg);
-	if (ret) {
-		dev_err(dev, "Failed to enable vdd regulator: %d\n", ret);
-		return ret;
-	}
-
-	ret = devm_add_action_or_reset(dev, fxls8962af_regulator_disable, data);
+	ret = devm_regulator_get_enable(dev, "vdd");
 	if (ret)
-		return ret;
+		return dev_err_probe(dev, ret,
+				     "Failed to get vdd regulator\n");
 
 	ret = regmap_read(data->regmap, FXLS8962AF_WHO_AM_I, &reg);
 	if (ret)
@@ -1241,7 +1223,7 @@ int fxls8962af_core_probe(struct device *dev, struct regmap *regmap, int irq)
 }
 EXPORT_SYMBOL_NS_GPL(fxls8962af_core_probe, IIO_FXLS8962AF);
 
-static int __maybe_unused fxls8962af_runtime_suspend(struct device *dev)
+static int fxls8962af_runtime_suspend(struct device *dev)
 {
 	struct fxls8962af_data *data = iio_priv(dev_get_drvdata(dev));
 	int ret;
@@ -1255,14 +1237,14 @@ static int __maybe_unused fxls8962af_runtime_suspend(struct device *dev)
 	return 0;
 }
 
-static int __maybe_unused fxls8962af_runtime_resume(struct device *dev)
+static int fxls8962af_runtime_resume(struct device *dev)
 {
 	struct fxls8962af_data *data = iio_priv(dev_get_drvdata(dev));
 
 	return fxls8962af_active(data);
 }
 
-static int __maybe_unused fxls8962af_suspend(struct device *dev)
+static int fxls8962af_suspend(struct device *dev)
 {
 	struct iio_dev *indio_dev = dev_get_drvdata(dev);
 	struct fxls8962af_data *data = iio_priv(indio_dev);
@@ -1283,7 +1265,7 @@ static int __maybe_unused fxls8962af_suspend(struct device *dev)
 	return 0;
 }
 
-static int __maybe_unused fxls8962af_resume(struct device *dev)
+static int fxls8962af_resume(struct device *dev)
 {
 	struct iio_dev *indio_dev = dev_get_drvdata(dev);
 	struct fxls8962af_data *data = iio_priv(indio_dev);
@@ -1300,12 +1282,10 @@ static int __maybe_unused fxls8962af_resume(struct device *dev)
 	return 0;
 }
 
-const struct dev_pm_ops fxls8962af_pm_ops = {
-	SET_SYSTEM_SLEEP_PM_OPS(fxls8962af_suspend, fxls8962af_resume)
-	SET_RUNTIME_PM_OPS(fxls8962af_runtime_suspend,
-			   fxls8962af_runtime_resume, NULL)
+EXPORT_NS_GPL_DEV_PM_OPS(fxls8962af_pm_ops, IIO_FXLS8962AF) = {
+	SYSTEM_SLEEP_PM_OPS(fxls8962af_suspend, fxls8962af_resume)
+	RUNTIME_PM_OPS(fxls8962af_runtime_suspend, fxls8962af_runtime_resume, NULL)
 };
-EXPORT_SYMBOL_NS_GPL(fxls8962af_pm_ops, IIO_FXLS8962AF);
 
 MODULE_AUTHOR("Sean Nyekjaer <sean@geanix.com>");
 MODULE_DESCRIPTION("NXP FXLS8962AF/FXLS8964AF accelerometer driver");

drivers/iio/accel/fxls8962af-i2c.c

@@ -45,7 +45,7 @@ static struct i2c_driver fxls8962af_driver = {
 	.driver = {
 		   .name = "fxls8962af_i2c",
 		   .of_match_table = fxls8962af_of_match,
-		   .pm = &fxls8962af_pm_ops,
+		   .pm = pm_ptr(&fxls8962af_pm_ops),
 		   },
 	.probe_new = fxls8962af_probe,
 	.id_table = fxls8962af_id,

drivers/iio/accel/fxls8962af-spi.c

@@ -44,7 +44,7 @@ MODULE_DEVICE_TABLE(spi, fxls8962af_spi_id_table);
 static struct spi_driver fxls8962af_driver = {
 	.driver = {
 		   .name = "fxls8962af_spi",
-		   .pm = &fxls8962af_pm_ops,
+		   .pm = pm_ptr(&fxls8962af_pm_ops),
 		   .of_match_table = fxls8962af_spi_of_match,
 		   },
 	.probe = fxls8962af_probe,

drivers/iio/accel/kionix-kx022a-i2c.c

+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2022 ROHM Semiconductors
+ *
+ * ROHM/KIONIX KX022A accelerometer driver
+ */
+
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/regmap.h>
+
+#include "kionix-kx022a.h"
+
+static int kx022a_i2c_probe(struct i2c_client *i2c)
+{
+	struct device *dev = &i2c->dev;
+	struct regmap *regmap;
+
+	if (!i2c->irq) {
+		dev_err(dev, "No IRQ configured\n");
+		return -EINVAL;
+	}
+
+	regmap = devm_regmap_init_i2c(i2c, &kx022a_regmap);
+	if (IS_ERR(regmap))
+		return dev_err_probe(dev, PTR_ERR(regmap),
+				     "Failed to initialize Regmap\n");
+
+	return kx022a_probe_internal(dev);
+}
+
+static const struct of_device_id kx022a_of_match[] = {
+	{ .compatible = "kionix,kx022a", },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, kx022a_of_match);
+
+static struct i2c_driver kx022a_i2c_driver = {
+	.driver = {
+		.name  = "kx022a-i2c",
+		.of_match_table = kx022a_of_match,
+	  },
+	.probe_new    = kx022a_i2c_probe,
+};
+module_i2c_driver(kx022a_i2c_driver);
+
+MODULE_DESCRIPTION("ROHM/Kionix KX022A accelerometer driver");
+MODULE_AUTHOR("Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>");
+MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS(IIO_KX022A);

drivers/iio/accel/kionix-kx022a-spi.c

+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2022 ROHM Semiconductors
+ *
+ * ROHM/KIONIX KX022A accelerometer driver
+ */
+
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/regmap.h>
+#include <linux/spi/spi.h>
+
+#include "kionix-kx022a.h"
+
+static int kx022a_spi_probe(struct spi_device *spi)
+{
+	struct device *dev = &spi->dev;
+	struct regmap *regmap;
+
+	if (!spi->irq) {
+		dev_err(dev, "No IRQ configured\n");
+		return -EINVAL;
+	}
+
+	regmap = devm_regmap_init_spi(spi, &kx022a_regmap);
+	if (IS_ERR(regmap))
+		return dev_err_probe(dev, PTR_ERR(regmap),
+				     "Failed to initialize Regmap\n");
+
+	return kx022a_probe_internal(dev);
+}
+
+static const struct spi_device_id kx022a_id[] = {
+	{ "kx022a" },
+	{ }
+};
+MODULE_DEVICE_TABLE(spi, kx022a_id);
+
+static const struct of_device_id kx022a_of_match[] = {
+	{ .compatible = "kionix,kx022a", },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, kx022a_of_match);
+
+static struct spi_driver kx022a_spi_driver = {
+	.driver = {
+		.name   = "kx022a-spi",
+		.of_match_table = kx022a_of_match,
+	},
+	.probe = kx022a_spi_probe,
+	.id_table = kx022a_id,
+};
+module_spi_driver(kx022a_spi_driver);
+
+MODULE_DESCRIPTION("ROHM/Kionix kx022A accelerometer driver");
+MODULE_AUTHOR("Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>");
+MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS(IIO_KX022A);

drivers/iio/accel/kionix-kx022a.h

+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Copyright (C) 2022 ROHM Semiconductors
+ *
+ * ROHM/KIONIX KX022A accelerometer driver
+ */
+
+#ifndef _KX022A_H_
+#define _KX022A_H_
+
+#include <linux/bits.h>
+#include <linux/regmap.h>
+
+#define KX022A_REG_WHO		0x0f
+#define KX022A_ID		0xc8
+
+#define KX022A_REG_CNTL2	0x19
+#define KX022A_MASK_SRST	BIT(7)
+#define KX022A_REG_CNTL		0x18
+#define KX022A_MASK_PC1		BIT(7)
+#define KX022A_MASK_RES		BIT(6)
+#define KX022A_MASK_DRDY	BIT(5)
+#define KX022A_MASK_GSEL	GENMASK(4, 3)
+#define KX022A_GSEL_SHIFT	3
+#define KX022A_GSEL_2		0x0
+#define KX022A_GSEL_4		BIT(3)
+#define KX022A_GSEL_8		BIT(4)
+#define KX022A_GSEL_16		GENMASK(4, 3)
+
+#define KX022A_REG_INS2		0x13
+#define KX022A_MASK_INS2_DRDY	BIT(4)
+#define KX122_MASK_INS2_WMI	BIT(5)
+
+#define KX022A_REG_XHP_L	0x0
+#define KX022A_REG_XOUT_L	0x06
+#define KX022A_REG_YOUT_L	0x08
+#define KX022A_REG_ZOUT_L	0x0a
+#define KX022A_REG_COTR		0x0c
+#define KX022A_REG_TSCP		0x10
+#define KX022A_REG_INT_REL	0x17
+
+#define KX022A_REG_ODCNTL	0x1b
+
+#define KX022A_REG_BTS_WUF_TH	0x31
+#define KX022A_REG_MAN_WAKE	0x2c
+
+#define KX022A_REG_BUF_CNTL1	0x3a
+#define KX022A_MASK_WM_TH	GENMASK(6, 0)
+#define KX022A_REG_BUF_CNTL2	0x3b
+#define KX022A_MASK_BUF_EN	BIT(7)
+#define KX022A_MASK_BRES16	BIT(6)
+#define KX022A_REG_BUF_STATUS_1	0x3c
+#define KX022A_REG_BUF_STATUS_2	0x3d
+#define KX022A_REG_BUF_CLEAR	0x3e
+#define KX022A_REG_BUF_READ	0x3f
+#define KX022A_MASK_ODR		GENMASK(3, 0)
+#define KX022A_ODR_SHIFT	3
+#define KX022A_FIFO_MAX_WMI_TH	41
+
+#define KX022A_REG_INC1		0x1c
+#define KX022A_REG_INC5		0x20
+#define KX022A_REG_INC6		0x21
+#define KX022A_MASK_IEN		BIT(5)
+#define KX022A_MASK_IPOL	BIT(4)
+#define KX022A_IPOL_LOW		0
+#define KX022A_IPOL_HIGH	KX022A_MASK_IPOL1
+#define KX022A_MASK_ITYP	BIT(3)
+#define KX022A_ITYP_PULSE	KX022A_MASK_ITYP
+#define KX022A_ITYP_LEVEL	0
+
+#define KX022A_REG_INC4		0x1f
+#define KX022A_MASK_WMI		BIT(5)
+
+#define KX022A_REG_SELF_TEST	0x60
+#define KX022A_MAX_REGISTER	0x60
+
+struct device;
+
+int kx022a_probe_internal(struct device *dev);
+extern const struct regmap_config kx022a_regmap;
+
+#endif

drivers/iio/accel/kxcjk-1013.c

@@ -241,7 +241,6 @@ enum kxcjk1013_axis {
 };
 
 struct kxcjk1013_data {
-	struct regulator_bulk_data regulators[2];
 	struct i2c_client *client;
 	struct iio_trigger *dready_trig;
 	struct iio_trigger *motion_trig;
@@ -1425,16 +1424,10 @@ static const char *kxcjk1013_match_acpi_device(struct device *dev,
 	return dev_name(dev);
 }
 
-static void kxcjk1013_disable_regulators(void *d)
-{
-	struct kxcjk1013_data *data = d;
-
-	regulator_bulk_disable(ARRAY_SIZE(data->regulators), data->regulators);
-}
-
 static int kxcjk1013_probe(struct i2c_client *client,
 			   const struct i2c_device_id *id)
 {
+	static const char * const regulator_names[] = { "vdd", "vddio" };
 	struct kxcjk1013_data *data;
 	struct iio_dev *indio_dev;
 	struct kxcjk_1013_platform_data *pdata;
@@ -1461,22 +1454,12 @@ static int kxcjk1013_probe(struct i2c_client *client,
 			return ret;
 	}
 
-	data->regulators[0].supply = "vdd";
-	data->regulators[1].supply = "vddio";
-	ret = devm_regulator_bulk_get(&client->dev, ARRAY_SIZE(data->regulators),
-				      data->regulators);
+	ret = devm_regulator_bulk_get_enable(&client->dev,
+					     ARRAY_SIZE(regulator_names),
+					     regulator_names);
 	if (ret)
 		return dev_err_probe(&client->dev, ret, "Failed to get regulators\n");
 
-	ret = regulator_bulk_enable(ARRAY_SIZE(data->regulators),
-				    data->regulators);
-	if (ret)
-		return ret;
-
-	ret = devm_add_action_or_reset(&client->dev, kxcjk1013_disable_regulators, data);
-	if (ret)
-		return ret;
-
 	/*
 	 * A typical delay of 10ms is required for powering up
 	 * according to the data sheets of supported chips.

drivers/iio/accel/kxsd9-i2c.c

@@ -10,8 +10,7 @@
 
 #include "kxsd9.h"
 
-static int kxsd9_i2c_probe(struct i2c_client *i2c,
-			   const struct i2c_device_id *id)
+static int kxsd9_i2c_probe(struct i2c_client *i2c)
 {
 	static const struct regmap_config config = {
 		.reg_bits = 8,
@@ -55,7 +54,7 @@ static struct i2c_driver kxsd9_i2c_driver = {
 		.of_match_table = kxsd9_of_match,
 		.pm = pm_ptr(&kxsd9_dev_pm_ops),
 	},
-	.probe		= kxsd9_i2c_probe,
+	.probe_new	= kxsd9_i2c_probe,
 	.remove		= kxsd9_i2c_remove,
 	.id_table	= kxsd9_i2c_id,
 };

drivers/iio/accel/mc3230.c

@@ -106,8 +106,7 @@ static const struct iio_info mc3230_info = {
 	.read_raw	= mc3230_read_raw,
 };
 
-static int mc3230_probe(struct i2c_client *client,
-			const struct i2c_device_id *id)
+static int mc3230_probe(struct i2c_client *client)
 {
 	int ret;
 	struct iio_dev *indio_dev;
@@ -191,7 +190,7 @@ static struct i2c_driver mc3230_driver = {
 		.name = "mc3230",
 		.pm = pm_sleep_ptr(&mc3230_pm_ops),
 	},
-	.probe		= mc3230_probe,
+	.probe_new	= mc3230_probe,
 	.remove		= mc3230_remove,
 	.id_table	= mc3230_i2c_id,
 };

drivers/iio/accel/mma7660.c

@@ -169,8 +169,7 @@ static const struct iio_info mma7660_info = {
 	.attrs			= &mma7660_attribute_group,
 };
 
-static int mma7660_probe(struct i2c_client *client,
-			const struct i2c_device_id *id)
+static int mma7660_probe(struct i2c_client *client)
 {
 	int ret;
 	struct iio_dev *indio_dev;
@@ -267,7 +266,7 @@ static struct i2c_driver mma7660_driver = {
 		.of_match_table = mma7660_of_match,
 		.acpi_match_table = mma7660_acpi_id,
 	},
-	.probe		= mma7660_probe,
+	.probe_new	= mma7660_probe,
 	.remove		= mma7660_remove,
 	.id_table	= mma7660_i2c_id,
 };

drivers/iio/accel/msa311.c

@@ -351,7 +351,6 @@ static const struct regmap_config msa311_regmap_config = {
  * @chip_name: Chip name in the format "msa311-%02x" % partid
  * @new_data_trig: Optional NEW_DATA interrupt driven trigger used
  *                 to notify external consumers a new sample is ready
- * @vdd: Optional external voltage regulator for the device power supply
  */
 struct msa311_priv {
 	struct regmap *regs;
@@ -362,7 +361,6 @@ struct msa311_priv {
 	char *chip_name;
 
 	struct iio_trigger *new_data_trig;
-	struct regulator *vdd;
 };
 
 enum msa311_si {
@@ -1146,11 +1144,6 @@ static void msa311_powerdown(void *msa311)
 	msa311_set_pwr_mode(msa311, MSA311_PWR_MODE_SUSPEND);
 }
 
-static void msa311_vdd_disable(void *vdd)
-{
-	regulator_disable(vdd);
-}
-
 static int msa311_probe(struct i2c_client *i2c)
 {
 	struct device *dev = &i2c->dev;
@@ -1173,19 +1166,9 @@ static int msa311_probe(struct i2c_client *i2c)
 
 	mutex_init(&msa311->lock);
 
-	msa311->vdd = devm_regulator_get(dev, "vdd");
-	if (IS_ERR(msa311->vdd))
-		return dev_err_probe(dev, PTR_ERR(msa311->vdd),
-				     "can't get vdd supply\n");
-
-	err = regulator_enable(msa311->vdd);
+	err = devm_regulator_get_enable(dev, "vdd");
 	if (err)
-		return dev_err_probe(dev, err, "can't enable vdd supply\n");
-
-	err = devm_add_action_or_reset(dev, msa311_vdd_disable, msa311->vdd);
-	if (err)
-		return dev_err_probe(dev, err,
-				     "can't add vdd disable action\n");
+		return dev_err_probe(dev, err, "can't get vdd supply\n");
 
 	err = msa311_check_partid(msa311);
 	if (err)

drivers/iio/accel/mxc4005.c

@@ -385,8 +385,7 @@ static int mxc4005_chip_init(struct mxc4005_data *data)
 	return 0;
 }
 
-static int mxc4005_probe(struct i2c_client *client,
-			 const struct i2c_device_id *id)
+static int mxc4005_probe(struct i2c_client *client)
 {
 	struct mxc4005_data *data;
 	struct iio_dev *indio_dev;
@@ -489,7 +488,7 @@ static struct i2c_driver mxc4005_driver = {
 		.name = MXC4005_DRV_NAME,
 		.acpi_match_table = ACPI_PTR(mxc4005_acpi_match),
 	},
-	.probe		= mxc4005_probe,
+	.probe_new	= mxc4005_probe,
 	.id_table	= mxc4005_id,
 };
 

drivers/iio/accel/mxc6255.c

@@ -113,8 +113,7 @@ static const struct regmap_config mxc6255_regmap_config = {
 	.readable_reg = mxc6255_is_readable_reg,
 };
 
-static int mxc6255_probe(struct i2c_client *client,
-			 const struct i2c_device_id *id)
+static int mxc6255_probe(struct i2c_client *client)
 {
 	struct mxc6255_data *data;
 	struct iio_dev *indio_dev;
@@ -184,7 +183,7 @@ static struct i2c_driver mxc6255_driver = {
 		.name = MXC6255_DRV_NAME,
 		.acpi_match_table = ACPI_PTR(mxc6255_acpi_match),
 	},
-	.probe		= mxc6255_probe,
+	.probe_new	= mxc6255_probe,
 	.id_table	= mxc6255_id,
 };
 

drivers/iio/accel/sca3300.c

@@ -679,12 +679,20 @@ static const struct of_device_id sca3300_dt_ids[] = {
 };
 MODULE_DEVICE_TABLE(of, sca3300_dt_ids);
 
+static const struct spi_device_id sca3300_ids[] = {
+	{ "sca3300" },
+	{ "scl3300" },
+	{}
+};
+MODULE_DEVICE_TABLE(spi, sca3300_ids);
+
 static struct spi_driver sca3300_driver = {
-	.driver = {
+	.driver   = {
 		.name		= SCA3300_ALIAS,
 		.of_match_table = sca3300_dt_ids,
 	},
-	.probe	= sca3300_probe,
+	.probe	  = sca3300_probe,
+	.id_table = sca3300_ids,
 };
 module_spi_driver(sca3300_driver);
 

drivers/iio/accel/stk8312.c

@@ -498,8 +498,7 @@ static const struct iio_buffer_setup_ops stk8312_buffer_setup_ops = {
 	.postdisable = stk8312_buffer_postdisable,
 };
 
-static int stk8312_probe(struct i2c_client *client,
-			 const struct i2c_device_id *id)
+static int stk8312_probe(struct i2c_client *client)
 {
 	int ret;
 	struct iio_dev *indio_dev;
@@ -645,7 +644,7 @@ static struct i2c_driver stk8312_driver = {
 		.name = STK8312_DRIVER_NAME,
 		.pm = pm_sleep_ptr(&stk8312_pm_ops),
 	},
-	.probe =            stk8312_probe,
+	.probe_new =        stk8312_probe,
 	.remove =           stk8312_remove,
 	.id_table =         stk8312_i2c_id,
 };

drivers/iio/accel/stk8ba50.c

@@ -379,8 +379,7 @@ static const struct iio_buffer_setup_ops stk8ba50_buffer_setup_ops = {
 	.postdisable = stk8ba50_buffer_postdisable,
 };
 
-static int stk8ba50_probe(struct i2c_client *client,
-			  const struct i2c_device_id *id)
+static int stk8ba50_probe(struct i2c_client *client)
 {
 	int ret;
 	struct iio_dev *indio_dev;
@@ -544,7 +543,7 @@ static struct i2c_driver stk8ba50_driver = {
 		.pm = pm_sleep_ptr(&stk8ba50_pm_ops),
 		.acpi_match_table = ACPI_PTR(stk8ba50_acpi_id),
 	},
-	.probe =            stk8ba50_probe,
+	.probe_new =        stk8ba50_probe,
 	.remove =           stk8ba50_remove,
 	.id_table =         stk8ba50_i2c_id,
 };

drivers/iio/adc/Kconfig

@@ -21,6 +21,21 @@ config AD_SIGMA_DELTA
 	select IIO_BUFFER
 	select IIO_TRIGGERED_BUFFER
 
+config AD4130
+	tristate "Analog Device AD4130 ADC Driver"
+	depends on SPI
+	depends on GPIOLIB
+	select IIO_BUFFER
+	select IIO_KFIFO_BUF
+	select REGMAP_SPI
+	depends on COMMON_CLK
+	help
+	  Say yes here to build support for Analog Devices AD4130-8 SPI analog
+	  to digital converters (ADC).
+
+	  To compile this driver as a module, choose M here: the module will be
+	  called ad4130.
+
 config AD7091R5
 	tristate "Analog Devices AD7091R5 ADC Driver"
 	depends on I2C
@@ -667,6 +682,19 @@ config MAX11205
 	  To compile this driver as a module, choose M here: the module will be
 	  called max11205.
 
+config MAX11410
+	tristate "Analog Devices MAX11410 ADC driver"
+	depends on SPI
+	select REGMAP_SPI
+	select IIO_BUFFER
+	select IIO_TRIGGER
+	select IIO_TRIGGERED_BUFFER
+	help
+	  Say yes here to build support for Analog Devices MAX11410 ADCs.
+
+	  To compile this driver as a module, choose M here: the module will be
+	  called max11410.
+
 config MAX1241
 	tristate "Maxim max1241 ADC driver"
 	depends on SPI_MASTER
@@ -752,6 +780,18 @@ config MEDIATEK_MT6360_ADC
 	  is used in smartphones and tablets and supports a 11 channel
 	  general purpose ADC.
 
+config MEDIATEK_MT6370_ADC
+	tristate "MediaTek MT6370 ADC driver"
+	depends on MFD_MT6370
+	help
+	  Say yes here to enable MediaTek MT6370 ADC support.
+
+	  This ADC driver provides 9 channels for system monitoring (charger
+	  current, voltage, and temperature).
+
+	  This driver can also be built as a module. If so, the module
+	  will be called "mt6370-adc".
+
 config MEDIATEK_MT6577_AUXADC
 	tristate "MediaTek AUXADC driver"
 	depends on ARCH_MEDIATEK || COMPILE_TEST

drivers/iio/adc/Makefile

@@ -6,6 +6,7 @@
 # When adding new entries keep the list in alphabetical order
 obj-$(CONFIG_AB8500_GPADC) += ab8500-gpadc.o
 obj-$(CONFIG_AD_SIGMA_DELTA) += ad_sigma_delta.o
+obj-$(CONFIG_AD4130) += ad4130.o
 obj-$(CONFIG_AD7091R5) += ad7091r5.o ad7091r-base.o
 obj-$(CONFIG_AD7124) += ad7124.o
 obj-$(CONFIG_AD7192) += ad7192.o
@@ -62,6 +63,7 @@ obj-$(CONFIG_MAX1027) += max1027.o
 obj-$(CONFIG_MAX11100) += max11100.o
 obj-$(CONFIG_MAX1118) += max1118.o
 obj-$(CONFIG_MAX11205) += max11205.o
+obj-$(CONFIG_MAX11410) += max11410.o
 obj-$(CONFIG_MAX1241) += max1241.o
 obj-$(CONFIG_MAX1363) += max1363.o
 obj-$(CONFIG_MAX9611) += max9611.o
@@ -69,6 +71,7 @@ obj-$(CONFIG_MCP320X) += mcp320x.o
 obj-$(CONFIG_MCP3422) += mcp3422.o
 obj-$(CONFIG_MCP3911) += mcp3911.o
 obj-$(CONFIG_MEDIATEK_MT6360_ADC) += mt6360-adc.o
+obj-$(CONFIG_MEDIATEK_MT6370_ADC) += mt6370-adc.o
 obj-$(CONFIG_MEDIATEK_MT6577_AUXADC) += mt6577_auxadc.o
 obj-$(CONFIG_MEN_Z188_ADC) += men_z188_adc.o
 obj-$(CONFIG_MESON_SARADC) += meson_saradc.o

drivers/iio/adc/ad7124.c

@@ -944,6 +944,8 @@ static int ad7124_probe(struct spi_device *spi)
 	int i, ret;
 
 	info = of_device_get_match_data(&spi->dev);
+	if (!info)
+		info = (void *)spi_get_device_id(spi)->driver_data;
 	if (!info)
 		return -ENODEV;
 
@@ -1021,12 +1023,20 @@ static const struct of_device_id ad7124_of_match[] = {
 };
 MODULE_DEVICE_TABLE(of, ad7124_of_match);
 
+static const struct spi_device_id ad71124_ids[] = {
+	{ "ad7124-4", (kernel_ulong_t)&ad7124_chip_info_tbl[ID_AD7124_4] },
+	{ "ad7124-8", (kernel_ulong_t)&ad7124_chip_info_tbl[ID_AD7124_8] },
+	{}
+};
+MODULE_DEVICE_TABLE(spi, ad71124_ids);
+
 static struct spi_driver ad71124_driver = {
 	.driver = {
 		.name = "ad7124",
 		.of_match_table = ad7124_of_match,
 	},
 	.probe = ad7124_probe,
+	.id_table = ad71124_ids,
 };
 module_spi_driver(ad71124_driver);
 

drivers/iio/adc/ad7192.c

@@ -177,7 +177,6 @@ struct ad7192_chip_info {
 struct ad7192_state {
 	const struct ad7192_chip_info	*chip_info;
 	struct regulator		*avdd;
-	struct regulator		*dvdd;
 	struct clk			*mclk;
 	u16				int_vref_mv;
 	u32				fclk;
@@ -1015,19 +1014,9 @@ static int ad7192_probe(struct spi_device *spi)
 	if (ret)
 		return ret;
 
-	st->dvdd = devm_regulator_get(&spi->dev, "dvdd");
-	if (IS_ERR(st->dvdd))
-		return PTR_ERR(st->dvdd);
-
-	ret = regulator_enable(st->dvdd);
-	if (ret) {
-		dev_err(&spi->dev, "Failed to enable specified DVdd supply\n");
-		return ret;
-	}
-
-	ret = devm_add_action_or_reset(&spi->dev, ad7192_reg_disable, st->dvdd);
+	ret = devm_regulator_get_enable(&spi->dev, "dvdd");
 	if (ret)
-		return ret;
+		return dev_err_probe(&spi->dev, ret, "Failed to enable specified DVdd supply\n");
 
 	ret = regulator_get_voltage(st->avdd);
 	if (ret < 0) {
@@ -1037,6 +1026,8 @@ static int ad7192_probe(struct spi_device *spi)
 	st->int_vref_mv = ret / 1000;
 
 	st->chip_info = of_device_get_match_data(&spi->dev);
+	if (!st->chip_info)
+		st->chip_info = (void *)spi_get_device_id(spi)->driver_data;
 	indio_dev->name = st->chip_info->name;
 	indio_dev->modes = INDIO_DIRECT_MODE;
 
@@ -1098,12 +1089,22 @@ static const struct of_device_id ad7192_of_match[] = {
 };
 MODULE_DEVICE_TABLE(of, ad7192_of_match);
 
+static const struct spi_device_id ad7192_ids[] = {
+	{ "ad7190", (kernel_ulong_t)&ad7192_chip_info_tbl[ID_AD7190] },
+	{ "ad7192", (kernel_ulong_t)&ad7192_chip_info_tbl[ID_AD7192] },
+	{ "ad7193", (kernel_ulong_t)&ad7192_chip_info_tbl[ID_AD7193] },
+	{ "ad7195", (kernel_ulong_t)&ad7192_chip_info_tbl[ID_AD7195] },
+	{}
+};
+MODULE_DEVICE_TABLE(spi, ad7192_ids);
+
 static struct spi_driver ad7192_driver = {
 	.driver = {
 		.name	= "ad7192",
 		.of_match_table = ad7192_of_match,
 	},
 	.probe		= ad7192_probe,
+	.id_table	= ad7192_ids,
 };
 module_spi_driver(ad7192_driver);
 

drivers/iio/adc/ad7476.c

@@ -368,16 +368,7 @@ static int ad7476_probe(struct spi_device *spi)
 	}
 
 	if (st->chip_info->has_vdrive) {
-		reg = devm_regulator_get(&spi->dev, "vdrive");
-		if (IS_ERR(reg))
-			return PTR_ERR(reg);
-
-		ret = regulator_enable(reg);
-		if (ret)
-			return ret;
-
-		ret = devm_add_action_or_reset(&spi->dev, ad7476_reg_disable,
-					       reg);
+		ret = devm_regulator_get_enable(&spi->dev, "vdrive");
 		if (ret)
 			return ret;
 	}

drivers/iio/adc/ad7606.c

@@ -557,13 +557,6 @@ static const struct iio_trigger_ops ad7606_trigger_ops = {
 	.validate_device = iio_trigger_validate_own_device,
 };
 
-static void ad7606_regulator_disable(void *data)
-{
-	struct ad7606_state *st = data;
-
-	regulator_disable(st->reg);
-}
-
 int ad7606_probe(struct device *dev, int irq, void __iomem *base_address,
 		 const char *name, unsigned int id,
 		 const struct ad7606_bus_ops *bops)
@@ -589,19 +582,10 @@ int ad7606_probe(struct device *dev, int irq, void __iomem *base_address,
 	st->scale_avail = ad7606_scale_avail;
 	st->num_scales = ARRAY_SIZE(ad7606_scale_avail);
 
-	st->reg = devm_regulator_get(dev, "avcc");
-	if (IS_ERR(st->reg))
-		return PTR_ERR(st->reg);
-
-	ret = regulator_enable(st->reg);
-	if (ret) {
-		dev_err(dev, "Failed to enable specified AVcc supply\n");
-		return ret;
-	}
-
-	ret = devm_add_action_or_reset(dev, ad7606_regulator_disable, st);
+	ret = devm_regulator_get_enable(dev, "avcc");
 	if (ret)
-		return ret;
+		return dev_err_probe(dev, ret,
+				     "Failed to enable specified AVcc supply\n");
 
 	st->chip_info = &ad7606_chip_info_tbl[id];
 

drivers/iio/adc/ad7606.h

@@ -62,7 +62,6 @@ struct ad7606_chip_info {
  * struct ad7606_state - driver instance specific data
  * @dev		pointer to kernel device
  * @chip_info		entry in the table of chips that describes this device
- * @reg		regulator info for the power supply of the device
  * @bops		bus operations (SPI or parallel)
  * @range		voltage range selection, selects which scale to apply
  * @oversampling	oversampling selection
@@ -92,7 +91,6 @@ struct ad7606_chip_info {
 struct ad7606_state {
 	struct device			*dev;
 	const struct ad7606_chip_info	*chip_info;
-	struct regulator		*reg;
 	const struct ad7606_bus_ops	*bops;
 	unsigned int			range[16];
 	unsigned int			oversampling;

drivers/iio/adc/ad799x.c

@@ -28,6 +28,7 @@
 #include <linux/types.h>
 #include <linux/err.h>
 #include <linux/module.h>
+#include <linux/mutex.h>
 #include <linux/bitops.h>
 
 #include <linux/iio/iio.h>
@@ -125,6 +126,8 @@ struct ad799x_state {
 	const struct ad799x_chip_config	*chip_config;
 	struct regulator		*reg;
 	struct regulator		*vref;
+	/* lock to protect against multiple access to the device */
+	struct mutex			lock;
 	unsigned			id;
 	u16				config;
 
@@ -290,7 +293,9 @@ static int ad799x_read_raw(struct iio_dev *indio_dev,
 		ret = iio_device_claim_direct_mode(indio_dev);
 		if (ret)
 			return ret;
+		mutex_lock(&st->lock);
 		ret = ad799x_scan_direct(st, chan->scan_index);
+		mutex_unlock(&st->lock);
 		iio_device_release_direct_mode(indio_dev);
 
 		if (ret < 0)
@@ -351,7 +356,8 @@ static ssize_t ad799x_write_frequency(struct device *dev,
 	if (ret)
 		return ret;
 
-	mutex_lock(&indio_dev->mlock);
+	mutex_lock(&st->lock);
+
 	ret = i2c_smbus_read_byte_data(st->client, AD7998_CYCLE_TMR_REG);
 	if (ret < 0)
 		goto error_ret_mutex;
@@ -373,7 +379,7 @@ static ssize_t ad799x_write_frequency(struct device *dev,
 	ret = len;
 
 error_ret_mutex:
-	mutex_unlock(&indio_dev->mlock);
+	mutex_unlock(&st->lock);
 
 	return ret;
 }
@@ -407,6 +413,8 @@ static int ad799x_write_event_config(struct iio_dev *indio_dev,
 	if (ret)
 		return ret;
 
+	mutex_lock(&st->lock);
+
 	if (state)
 		st->config |= BIT(chan->scan_index) << AD799X_CHANNEL_SHIFT;
 	else
@@ -418,6 +426,7 @@ static int ad799x_write_event_config(struct iio_dev *indio_dev,
 		st->config &= ~AD7998_ALERT_EN;
 
 	ret = ad799x_write_config(st, st->config);
+	mutex_unlock(&st->lock);
 	iio_device_release_direct_mode(indio_dev);
 	return ret;
 }
@@ -454,11 +463,9 @@ static int ad799x_write_event_value(struct iio_dev *indio_dev,
 	if (val < 0 || val > GENMASK(chan->scan_type.realbits - 1, 0))
 		return -EINVAL;
 
-	mutex_lock(&indio_dev->mlock);
 	ret = i2c_smbus_write_word_swapped(st->client,
 		ad799x_threshold_reg(chan, dir, info),
 		val << chan->scan_type.shift);
-	mutex_unlock(&indio_dev->mlock);
 
 	return ret;
 }
@@ -473,10 +480,8 @@ static int ad799x_read_event_value(struct iio_dev *indio_dev,
 	int ret;
 	struct ad799x_state *st = iio_priv(indio_dev);
 
-	mutex_lock(&indio_dev->mlock);
 	ret = i2c_smbus_read_word_swapped(st->client,
 		ad799x_threshold_reg(chan, dir, info));
-	mutex_unlock(&indio_dev->mlock);
 	if (ret < 0)
 		return ret;
 	*val = (ret >> chan->scan_type.shift) &
@@ -863,6 +868,9 @@ static int ad799x_probe(struct i2c_client *client,
 		if (ret)
 			goto error_cleanup_ring;
 	}
+
+	mutex_init(&st->lock);
+
 	ret = iio_device_register(indio_dev);
 	if (ret)
 		goto error_cleanup_ring;

drivers/iio/adc/ad9467.c

@@ -387,6 +387,8 @@ static int ad9467_probe(struct spi_device *spi)
 	int ret;
 
 	info = of_device_get_match_data(&spi->dev);
+	if (!info)
+		info = (void *)spi_get_device_id(spi)->driver_data;
 	if (!info)
 		return -ENODEV;
 
@@ -447,12 +449,21 @@ static const struct of_device_id ad9467_of_match[] = {
 };
 MODULE_DEVICE_TABLE(of, ad9467_of_match);
 
+static const struct spi_device_id ad9467_ids[] = {
+	{ "ad9265", (kernel_ulong_t)&ad9467_chip_tbl[ID_AD9265] },
+	{ "ad9434", (kernel_ulong_t)&ad9467_chip_tbl[ID_AD9434] },
+	{ "ad9467", (kernel_ulong_t)&ad9467_chip_tbl[ID_AD9467] },
+	{}
+};
+MODULE_DEVICE_TABLE(spi, ad9467_ids);
+
 static struct spi_driver ad9467_driver = {
 	.driver = {
 		.name = "ad9467",
 		.of_match_table = ad9467_of_match,
 	},
 	.probe = ad9467_probe,
+	.id_table = ad9467_ids,
 };
 module_spi_driver(ad9467_driver);
 

drivers/iio/adc/ad_sigma_delta.c

@@ -281,10 +281,10 @@ int ad_sigma_delta_single_conversion(struct iio_dev *indio_dev,
 	unsigned int data_reg;
 	int ret = 0;
 
-	if (iio_buffer_enabled(indio_dev))
-		return -EBUSY;
+	ret = iio_device_claim_direct_mode(indio_dev);
+	if (ret)
+		return ret;
 
-	mutex_lock(&indio_dev->mlock);
 	ad_sigma_delta_set_channel(sigma_delta, chan->address);
 
 	spi_bus_lock(sigma_delta->spi->master);
@@ -323,7 +323,7 @@ int ad_sigma_delta_single_conversion(struct iio_dev *indio_dev,
 	ad_sigma_delta_set_mode(sigma_delta, AD_SD_MODE_IDLE);
 	sigma_delta->bus_locked = false;
 	spi_bus_unlock(sigma_delta->spi->master);
-	mutex_unlock(&indio_dev->mlock);
+	iio_device_release_direct_mode(indio_dev);
 
 	if (ret)
 		return ret;

drivers/iio/adc/at91-sama5d2_adc.c

@@ -2193,32 +2193,19 @@ static ssize_t at91_adc_get_watermark(struct device *dev,
 	return scnprintf(buf, PAGE_SIZE, "%d\n", st->dma_st.watermark);
 }
 
-static ssize_t hwfifo_watermark_min_show(struct device *dev,
-					 struct device_attribute *attr,
-					 char *buf)
-{
-	return sysfs_emit(buf, "%s\n", "2");
-}
-
-static ssize_t hwfifo_watermark_max_show(struct device *dev,
-					 struct device_attribute *attr,
-					 char *buf)
-{
-	return sysfs_emit(buf, "%s\n", AT91_HWFIFO_MAX_SIZE_STR);
-}
-
 static IIO_DEVICE_ATTR(hwfifo_enabled, 0444,
 		       at91_adc_get_fifo_state, NULL, 0);
 static IIO_DEVICE_ATTR(hwfifo_watermark, 0444,
 		       at91_adc_get_watermark, NULL, 0);
-static IIO_DEVICE_ATTR_RO(hwfifo_watermark_min, 0);
-static IIO_DEVICE_ATTR_RO(hwfifo_watermark_max, 0);
-
-static const struct attribute *at91_adc_fifo_attributes[] = {
-	&iio_dev_attr_hwfifo_watermark_min.dev_attr.attr,
-	&iio_dev_attr_hwfifo_watermark_max.dev_attr.attr,
-	&iio_dev_attr_hwfifo_watermark.dev_attr.attr,
-	&iio_dev_attr_hwfifo_enabled.dev_attr.attr,
+
+IIO_STATIC_CONST_DEVICE_ATTR(hwfifo_watermark_min, "2");
+IIO_STATIC_CONST_DEVICE_ATTR(hwfifo_watermark_max, AT91_HWFIFO_MAX_SIZE_STR);
+
+static const struct iio_dev_attr *at91_adc_fifo_attributes[] = {
+	&iio_dev_attr_hwfifo_watermark_min,
+	&iio_dev_attr_hwfifo_watermark_max,
+	&iio_dev_attr_hwfifo_watermark,
+	&iio_dev_attr_hwfifo_enabled,
 	NULL,
 };
 
@@ -2235,7 +2222,7 @@ static int at91_adc_buffer_and_trigger_init(struct device *dev,
 					    struct iio_dev *indio)
 {
 	struct at91_adc_state *st = iio_priv(indio);
-	const struct attribute **fifo_attrs;
+	const struct iio_dev_attr **fifo_attrs;
 	int ret;
 
 	if (st->selected_trig->hw_trig)

drivers/iio/adc/axp288_adc.c

@@ -9,6 +9,7 @@
 
 #include <linux/dmi.h>
 #include <linux/module.h>
+#include <linux/mutex.h>
 #include <linux/kernel.h>
 #include <linux/device.h>
 #include <linux/regmap.h>
@@ -50,6 +51,8 @@ enum axp288_adc_id {
 struct axp288_adc_info {
 	int irq;
 	struct regmap *regmap;
+	/* lock to protect against multiple access to the device */
+	struct mutex lock;
 	bool ts_enabled;
 };
 
@@ -161,7 +164,7 @@ static int axp288_adc_read_raw(struct iio_dev *indio_dev,
 	int ret;
 	struct axp288_adc_info *info = iio_priv(indio_dev);
 
-	mutex_lock(&indio_dev->mlock);
+	mutex_lock(&info->lock);
 	switch (mask) {
 	case IIO_CHAN_INFO_RAW:
 		if (axp288_adc_set_ts(info, AXP288_ADC_TS_CURRENT_ON_ONDEMAND,
@@ -178,7 +181,7 @@ static int axp288_adc_read_raw(struct iio_dev *indio_dev,
 	default:
 		ret = -EINVAL;
 	}
-	mutex_unlock(&indio_dev->mlock);
+	mutex_unlock(&info->lock);
 
 	return ret;
 }
@@ -289,6 +292,8 @@ static int axp288_adc_probe(struct platform_device *pdev)
 	if (ret < 0)
 		return ret;
 
+	mutex_init(&info->lock);
+
 	return devm_iio_device_register(&pdev->dev, indio_dev);
 }
 

drivers/iio/adc/cc10001_adc.c

@@ -305,16 +305,27 @@ static int cc10001_adc_channel_init(struct iio_dev *indio_dev,
 	return 0;
 }
 
+static void cc10001_reg_disable(void *priv)
+{
+	regulator_disable(priv);
+}
+
+static void cc10001_pd_cb(void *priv)
+{
+	cc10001_adc_power_down(priv);
+}
+
 static int cc10001_adc_probe(struct platform_device *pdev)
 {
-	struct device_node *node = pdev->dev.of_node;
+	struct device *dev = &pdev->dev;
+	struct device_node *node = dev->of_node;
 	struct cc10001_adc_device *adc_dev;
 	unsigned long adc_clk_rate;
 	struct iio_dev *indio_dev;
 	unsigned long channel_map;
 	int ret;
 
-	indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*adc_dev));
+	indio_dev = devm_iio_device_alloc(dev, sizeof(*adc_dev));
 	if (indio_dev == NULL)
 		return -ENOMEM;
 
@@ -326,7 +337,7 @@ static int cc10001_adc_probe(struct platform_device *pdev)
 		channel_map &= ~ret;
 	}
 
-	adc_dev->reg = devm_regulator_get(&pdev->dev, "vref");
+	adc_dev->reg = devm_regulator_get(dev, "vref");
 	if (IS_ERR(adc_dev->reg))
 		return PTR_ERR(adc_dev->reg);
 
@@ -334,34 +345,28 @@ static int cc10001_adc_probe(struct platform_device *pdev)
 	if (ret)
 		return ret;
 
-	indio_dev->name = dev_name(&pdev->dev);
+	ret = devm_add_action_or_reset(dev, cc10001_reg_disable, adc_dev->reg);
+	if (ret)
+		return ret;
+
+	indio_dev->name = dev_name(dev);
 	indio_dev->info = &cc10001_adc_info;
 	indio_dev->modes = INDIO_DIRECT_MODE;
 
 	adc_dev->reg_base = devm_platform_ioremap_resource(pdev, 0);
-	if (IS_ERR(adc_dev->reg_base)) {
-		ret = PTR_ERR(adc_dev->reg_base);
-		goto err_disable_reg;
-	}
+	if (IS_ERR(adc_dev->reg_base))
+		return PTR_ERR(adc_dev->reg_base);
 
-	adc_dev->adc_clk = devm_clk_get(&pdev->dev, "adc");
+	adc_dev->adc_clk = devm_clk_get_enabled(dev, "adc");
 	if (IS_ERR(adc_dev->adc_clk)) {
-		dev_err(&pdev->dev, "failed to get the clock\n");
-		ret = PTR_ERR(adc_dev->adc_clk);
-		goto err_disable_reg;
-	}
-
-	ret = clk_prepare_enable(adc_dev->adc_clk);
-	if (ret) {
-		dev_err(&pdev->dev, "failed to enable the clock\n");
-		goto err_disable_reg;
+		dev_err(dev, "failed to get/enable the clock\n");
+		return PTR_ERR(adc_dev->adc_clk);
 	}
 
 	adc_clk_rate = clk_get_rate(adc_dev->adc_clk);
 	if (!adc_clk_rate) {
-		ret = -EINVAL;
-		dev_err(&pdev->dev, "null clock rate!\n");
-		goto err_disable_clk;
+		dev_err(dev, "null clock rate!\n");
+		return -EINVAL;
 	}
 
 	adc_dev->eoc_delay_ns = NSEC_PER_SEC / adc_clk_rate;
@@ -375,47 +380,22 @@ static int cc10001_adc_probe(struct platform_device *pdev)
 	if (adc_dev->shared)
 		cc10001_adc_power_up(adc_dev);
 
+	ret = devm_add_action_or_reset(dev, cc10001_pd_cb, adc_dev);
+	if (ret)
+		return ret;
 	/* Setup the ADC channels available on the device */
 	ret = cc10001_adc_channel_init(indio_dev, channel_map);
 	if (ret < 0)
-		goto err_disable_clk;
+		return ret;
 
 	mutex_init(&adc_dev->lock);
 
-	ret = iio_triggered_buffer_setup(indio_dev, NULL,
-					 &cc10001_adc_trigger_h, NULL);
-	if (ret < 0)
-		goto err_disable_clk;
-
-	ret = iio_device_register(indio_dev);
+	ret = devm_iio_triggered_buffer_setup(dev, indio_dev, NULL,
+					      &cc10001_adc_trigger_h, NULL);
 	if (ret < 0)
-		goto err_cleanup_buffer;
-
-	platform_set_drvdata(pdev, indio_dev);
-
-	return 0;
-
-err_cleanup_buffer:
-	iio_triggered_buffer_cleanup(indio_dev);
-err_disable_clk:
-	clk_disable_unprepare(adc_dev->adc_clk);
-err_disable_reg:
-	regulator_disable(adc_dev->reg);
-	return ret;
-}
-
-static int cc10001_adc_remove(struct platform_device *pdev)
-{
-	struct iio_dev *indio_dev = platform_get_drvdata(pdev);
-	struct cc10001_adc_device *adc_dev = iio_priv(indio_dev);
-
-	cc10001_adc_power_down(adc_dev);
-	iio_device_unregister(indio_dev);
-	iio_triggered_buffer_cleanup(indio_dev);
-	clk_disable_unprepare(adc_dev->adc_clk);
-	regulator_disable(adc_dev->reg);
+		return ret;
 
-	return 0;
+	return devm_iio_device_register(dev, indio_dev);
 }
 
 static const struct of_device_id cc10001_adc_dt_ids[] = {
@@ -430,7 +410,6 @@ static struct platform_driver cc10001_adc_driver = {
 		.of_match_table = cc10001_adc_dt_ids,
 	},
 	.probe	= cc10001_adc_probe,
-	.remove	= cc10001_adc_remove,
 };
 module_platform_driver(cc10001_adc_driver);
 

drivers/iio/adc/imx7d_adc.c

@@ -13,6 +13,7 @@
 #include <linux/kernel.h>
 #include <linux/mod_devicetable.h>
 #include <linux/module.h>
+#include <linux/mutex.h>
 #include <linux/platform_device.h>
 #include <linux/regulator/consumer.h>
 
@@ -108,7 +109,8 @@ struct imx7d_adc {
 	struct device *dev;
 	void __iomem *regs;
 	struct clk *clk;
-
+	/* lock to protect against multiple access to the device */
+	struct mutex lock;
 	u32 vref_uv;
 	u32 value;
 	u32 channel;
@@ -293,7 +295,7 @@ static int imx7d_adc_read_raw(struct iio_dev *indio_dev,
 
 	switch (mask) {
 	case IIO_CHAN_INFO_RAW:
-		mutex_lock(&indio_dev->mlock);
+		mutex_lock(&info->lock);
 		reinit_completion(&info->completion);
 
 		channel = chan->channel & 0x03;
@@ -303,16 +305,16 @@ static int imx7d_adc_read_raw(struct iio_dev *indio_dev,
 		ret = wait_for_completion_interruptible_timeout
 				(&info->completion, IMX7D_ADC_TIMEOUT);
 		if (ret == 0) {
-			mutex_unlock(&indio_dev->mlock);
+			mutex_unlock(&info->lock);
 			return -ETIMEDOUT;
 		}
 		if (ret < 0) {
-			mutex_unlock(&indio_dev->mlock);
+			mutex_unlock(&info->lock);
 			return ret;
 		}
 
 		*val = info->value;
-		mutex_unlock(&indio_dev->mlock);
+		mutex_unlock(&info->lock);
 		return IIO_VAL_INT;
 
 	case IIO_CHAN_INFO_SCALE:
@@ -531,6 +533,8 @@ static int imx7d_adc_probe(struct platform_device *pdev)
 	if (ret)
 		return ret;
 
+	mutex_init(&info->lock);
+
 	ret = devm_iio_device_register(dev, indio_dev);
 	if (ret) {
 		dev_err(&pdev->dev, "Couldn't register the device.\n");

drivers/iio/adc/lpc32xx_adc.c

@@ -15,6 +15,7 @@
 #include <linux/io.h>
 #include <linux/module.h>
 #include <linux/mod_devicetable.h>
+#include <linux/mutex.h>
 #include <linux/platform_device.h>
 #include <linux/regulator/consumer.h>
 
@@ -49,6 +50,8 @@ struct lpc32xx_adc_state {
 	struct clk *clk;
 	struct completion completion;
 	struct regulator *vref;
+	/* lock to protect against multiple access to the device */
+	struct mutex lock;
 
 	u32 value;
 };
@@ -64,10 +67,10 @@ static int lpc32xx_read_raw(struct iio_dev *indio_dev,
 
 	switch (mask) {
 	case IIO_CHAN_INFO_RAW:
-		mutex_lock(&indio_dev->mlock);
+		mutex_lock(&st->lock);
 		ret = clk_prepare_enable(st->clk);
 		if (ret) {
-			mutex_unlock(&indio_dev->mlock);
+			mutex_unlock(&st->lock);
 			return ret;
 		}
 		/* Measurement setup */
@@ -80,7 +83,7 @@ static int lpc32xx_read_raw(struct iio_dev *indio_dev,
 		wait_for_completion(&st->completion); /* set by ISR */
 		clk_disable_unprepare(st->clk);
 		*val = st->value;
-		mutex_unlock(&indio_dev->mlock);
+		mutex_unlock(&st->lock);
 
 		return IIO_VAL_INT;
 
@@ -201,6 +204,8 @@ static int lpc32xx_adc_probe(struct platform_device *pdev)
 	iodev->modes = INDIO_DIRECT_MODE;
 	iodev->num_channels = ARRAY_SIZE(lpc32xx_adc_iio_channels);
 
+	mutex_init(&st->lock);
+
 	retval = devm_iio_device_register(&pdev->dev, iodev);
 	if (retval)
 		return retval;

drivers/iio/adc/ltc2497-core.c

@@ -10,6 +10,7 @@
 #include <linux/iio/iio.h>
 #include <linux/iio/driver.h>
 #include <linux/module.h>
+#include <linux/mutex.h>
 #include <linux/regulator/consumer.h>
 
 #include "ltc2497.h"
@@ -81,9 +82,9 @@ static int ltc2497core_read_raw(struct iio_dev *indio_dev,
 
 	switch (mask) {
 	case IIO_CHAN_INFO_RAW:
-		mutex_lock(&indio_dev->mlock);
+		mutex_lock(&ddata->lock);
 		ret = ltc2497core_read(ddata, chan->address, val);
-		mutex_unlock(&indio_dev->mlock);
+		mutex_unlock(&ddata->lock);
 		if (ret < 0)
 			return ret;
 
@@ -214,6 +215,8 @@ int ltc2497core_probe(struct device *dev, struct iio_dev *indio_dev)
 	ddata->addr_prev = LTC2497_CONFIG_DEFAULT;
 	ddata->time_prev = ktime_get();
 
+	mutex_init(&ddata->lock);
+
 	ret = iio_device_register(indio_dev);
 	if (ret < 0)
 		goto err_array_unregister;

drivers/iio/adc/ltc2497.h

@@ -12,6 +12,8 @@ struct ltc2497_chip_info {
 struct ltc2497core_driverdata {
 	struct regulator *ref;
 	ktime_t	time_prev;
+	/* lock to protect against multiple access to the device */
+	struct mutex lock;
 	const struct ltc2497_chip_info	*chip_info;
 	u8 addr_prev;
 	int (*result_and_measure)(struct ltc2497core_driverdata *ddata,

drivers/iio/adc/max1241.c

@@ -22,7 +22,6 @@ enum max1241_id {
 struct max1241 {
 	struct spi_device *spi;
 	struct mutex lock;
-	struct regulator *vdd;
 	struct regulator *vref;
 	struct gpio_desc *shutdown;
 
@@ -110,17 +109,6 @@ static const struct iio_info max1241_info = {
 	.read_raw = max1241_read_raw,
 };
 
-static void max1241_disable_vdd_action(void *data)
-{
-	struct max1241 *adc = data;
-	struct device *dev = &adc->spi->dev;
-	int err;
-
-	err = regulator_disable(adc->vdd);
-	if (err)
-		dev_err(dev, "could not disable vdd regulator.\n");
-}
-
 static void max1241_disable_vref_action(void *data)
 {
 	struct max1241 *adc = data;
@@ -147,20 +135,10 @@ static int max1241_probe(struct spi_device *spi)
 	adc->spi = spi;
 	mutex_init(&adc->lock);
 
-	adc->vdd = devm_regulator_get(dev, "vdd");
-	if (IS_ERR(adc->vdd))
-		return dev_err_probe(dev, PTR_ERR(adc->vdd),
-				     "failed to get vdd regulator\n");
-
-	ret = regulator_enable(adc->vdd);
+	ret = devm_regulator_get_enable(dev, "vdd");
 	if (ret)
-		return ret;
-
-	ret = devm_add_action_or_reset(dev, max1241_disable_vdd_action, adc);
-	if (ret) {
-		dev_err(dev, "could not set up vdd regulator cleanup action\n");
-		return ret;
-	}
+		return dev_err_probe(dev, ret,
+				     "failed to get/enable vdd regulator\n");
 
 	adc->vref = devm_regulator_get(dev, "vref");
 	if (IS_ERR(adc->vref))

drivers/iio/adc/max1363.c

@@ -148,7 +148,6 @@ struct max1363_chip_info {
  * @chip_info:		chip model specific constants, available modes, etc.
  * @current_mode:	the scan mode of this chip
  * @requestedmask:	a valid requested set of channels
- * @reg:		supply regulator
  * @lock:		lock to ensure state is consistent
  * @monitor_on:		whether monitor mode is enabled
  * @monitor_speed:	parameter corresponding to device monitor speed setting
@@ -168,7 +167,6 @@ struct max1363_state {
 	const struct max1363_chip_info	*chip_info;
 	const struct max1363_mode	*current_mode;
 	u32				requestedmask;
-	struct regulator		*reg;
 	struct mutex			lock;
 
 	/* Using monitor modes and buffer at the same time is
@@ -1597,15 +1595,7 @@ static int max1363_probe(struct i2c_client *client,
 	st = iio_priv(indio_dev);
 
 	mutex_init(&st->lock);
-	st->reg = devm_regulator_get(&client->dev, "vcc");
-	if (IS_ERR(st->reg))
-		return PTR_ERR(st->reg);
-
-	ret = regulator_enable(st->reg);
-	if (ret)
-		return ret;
-
-	ret = devm_add_action_or_reset(&client->dev, max1363_reg_disable, st->reg);
+	ret = devm_regulator_get_enable(&client->dev, "vcc");
 	if (ret)
 		return ret;
 

drivers/iio/adc/mcp3911.c

@@ -29,6 +29,8 @@
 #define MCP3911_REG_MOD			0x06
 #define MCP3911_REG_PHASE		0x07
 #define MCP3911_REG_GAIN		0x09
+#define MCP3911_GAIN_MASK(ch)		(GENMASK(2, 0) << 3 * ch)
+#define MCP3911_GAIN_VAL(ch, val)      ((val << 3 * ch) & MCP3911_GAIN_MASK(ch))
 
 #define MCP3911_REG_STATUSCOM		0x0a
 #define MCP3911_STATUSCOM_DRHIZ         BIT(12)
@@ -60,8 +62,10 @@
 #define MCP3911_REG_MASK		GENMASK(4, 1)
 
 #define MCP3911_NUM_CHANNELS		2
+#define MCP3911_NUM_SCALES		6
 
 static const int mcp3911_osr_table[] = { 32, 64, 128, 256, 512, 1024, 2048, 4096 };
+static u32 mcp3911_scale_table[MCP3911_NUM_SCALES][2];
 
 struct mcp3911 {
 	struct spi_device *spi;
@@ -70,6 +74,7 @@ struct mcp3911 {
 	struct clk *clki;
 	u32 dev_addr;
 	struct iio_trigger *trig;
+	u32 gain[MCP3911_NUM_CHANNELS];
 	struct {
 		u32 channels[MCP3911_NUM_CHANNELS];
 		s64 ts __aligned(8);
@@ -146,6 +151,11 @@ static int mcp3911_read_avail(struct iio_dev *indio_dev,
 		*vals = mcp3911_osr_table;
 		*length = ARRAY_SIZE(mcp3911_osr_table);
 		return IIO_AVAIL_LIST;
+	case IIO_CHAN_INFO_SCALE:
+		*type = IIO_VAL_INT_PLUS_NANO;
+		*vals = (int *)mcp3911_scale_table;
+		*length = ARRAY_SIZE(mcp3911_scale_table) * 2;
+		return IIO_AVAIL_LIST;
 	default:
 		return -EINVAL;
 	}
@@ -190,29 +200,9 @@ static int mcp3911_read_raw(struct iio_dev *indio_dev,
 		break;
 
 	case IIO_CHAN_INFO_SCALE:
-		if (adc->vref) {
-			ret = regulator_get_voltage(adc->vref);
-			if (ret < 0) {
-				dev_err(indio_dev->dev.parent,
-					"failed to get vref voltage: %d\n",
-				       ret);
-				goto out;
-			}
-
-			*val = ret / 1000;
-		} else {
-			*val = MCP3911_INT_VREF_MV;
-		}
-
-		/*
-		 * For 24bit Conversion
-		 * Raw = ((Voltage)/(Vref) * 2^23 * Gain * 1.5
-		 * Voltage = Raw * (Vref)/(2^23 * Gain * 1.5)
-		 */
-
-		/* val2 = (2^23 * 1.5) */
-		*val2 = 12582912;
-		ret = IIO_VAL_FRACTIONAL;
+		*val = mcp3911_scale_table[ilog2(adc->gain[channel->channel])][0];
+		*val2 = mcp3911_scale_table[ilog2(adc->gain[channel->channel])][1];
+		ret = IIO_VAL_INT_PLUS_NANO;
 		break;
 	}
 
@@ -230,6 +220,18 @@ static int mcp3911_write_raw(struct iio_dev *indio_dev,
 
 	mutex_lock(&adc->lock);
 	switch (mask) {
+	case IIO_CHAN_INFO_SCALE:
+		for (int i = 0; i < MCP3911_NUM_SCALES; i++) {
+			if (val == mcp3911_scale_table[i][0] &&
+				val2 == mcp3911_scale_table[i][1]) {
+
+				adc->gain[channel->channel] = BIT(i);
+				ret = mcp3911_update(adc, MCP3911_REG_GAIN,
+						MCP3911_GAIN_MASK(channel->channel),
+						MCP3911_GAIN_VAL(channel->channel, i), 1);
+			}
+		}
+		break;
 	case IIO_CHAN_INFO_OFFSET:
 		if (val2 != 0) {
 			ret = -EINVAL;
@@ -265,6 +267,44 @@ static int mcp3911_write_raw(struct iio_dev *indio_dev,
 	return ret;
 }
 
+static int mcp3911_calc_scale_table(struct mcp3911 *adc)
+{
+	u32 ref = MCP3911_INT_VREF_MV;
+	u32 div;
+	int ret;
+	u64 tmp;
+
+	if (adc->vref) {
+		ret = regulator_get_voltage(adc->vref);
+		if (ret < 0) {
+			dev_err(&adc->spi->dev,
+				"failed to get vref voltage: %d\n",
+			       ret);
+			return ret;
+		}
+
+		ref = ret / 1000;
+	}
+
+	/*
+	 * For 24-bit Conversion
+	 * Raw = ((Voltage)/(Vref) * 2^23 * Gain * 1.5
+	 * Voltage = Raw * (Vref)/(2^23 * Gain * 1.5)
+	 *
+	 * ref = Reference voltage
+	 * div = (2^23 * 1.5 * gain) = 12582912 * gain
+	 */
+	for (int i = 0; i < MCP3911_NUM_SCALES; i++) {
+		div = 12582912 * BIT(i);
+		tmp = div_s64((s64)ref * 1000000000LL, div);
+
+		mcp3911_scale_table[i][0] = 0;
+		mcp3911_scale_table[i][1] = tmp;
+	}
+
+	return 0;
+}
+
 #define MCP3911_CHAN(idx) {					\
 		.type = IIO_VOLTAGE,				\
 		.indexed = 1,					\
@@ -274,8 +314,10 @@ static int mcp3911_write_raw(struct iio_dev *indio_dev,
 		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |	\
 			BIT(IIO_CHAN_INFO_OFFSET) |		\
 			BIT(IIO_CHAN_INFO_SCALE),		\
-		.info_mask_shared_by_type_available =		\
+		.info_mask_shared_by_type_available =           \
 			BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO),	\
+		.info_mask_separate_available =			\
+			BIT(IIO_CHAN_INFO_SCALE),		\
 		.scan_type = {					\
 			.sign = 's',				\
 			.realbits = 24,				\
@@ -482,6 +524,20 @@ static int mcp3911_probe(struct spi_device *spi)
 	if (ret)
 		return ret;
 
+	ret = mcp3911_calc_scale_table(adc);
+	if (ret)
+		return ret;
+
+       /* Set gain to 1 for all channels */
+	for (int i = 0; i < MCP3911_NUM_CHANNELS; i++) {
+		adc->gain[i] = 1;
+		ret = mcp3911_update(adc, MCP3911_REG_GAIN,
+				MCP3911_GAIN_MASK(i),
+				MCP3911_GAIN_VAL(i, 0), 1);
+		if (ret)
+			return ret;
+	}
+
 	indio_dev->name = spi_get_device_id(spi)->name;
 	indio_dev->modes = INDIO_DIRECT_MODE;
 	indio_dev->info = &mcp3911_info;

drivers/iio/adc/meson_saradc.c

@@ -12,6 +12,7 @@
 #include <linux/io.h>
 #include <linux/iio/iio.h>
 #include <linux/module.h>
+#include <linux/mutex.h>
 #include <linux/nvmem-consumer.h>
 #include <linux/interrupt.h>
 #include <linux/of.h>
@@ -276,6 +277,8 @@ struct meson_sar_adc_priv {
 	struct clk				*adc_div_clk;
 	struct clk_divider			clk_div;
 	struct completion			done;
+	/* lock to protect against multiple access to the device */
+	struct mutex				lock;
 	int					calibbias;
 	int					calibscale;
 	struct regmap				*tsc_regmap;
@@ -486,7 +489,7 @@ static int meson_sar_adc_lock(struct iio_dev *indio_dev)
 	struct meson_sar_adc_priv *priv = iio_priv(indio_dev);
 	int val, ret;
 
-	mutex_lock(&indio_dev->mlock);
+	mutex_lock(&priv->lock);
 
 	if (priv->param->has_bl30_integration) {
 		/* prevent BL30 from using the SAR ADC while we are using it */
@@ -504,7 +507,7 @@ static int meson_sar_adc_lock(struct iio_dev *indio_dev)
 						      !(val & MESON_SAR_ADC_DELAY_BL30_BUSY),
 						      1, 10000);
 		if (ret) {
-			mutex_unlock(&indio_dev->mlock);
+			mutex_unlock(&priv->lock);
 			return ret;
 		}
 	}
@@ -521,7 +524,7 @@ static void meson_sar_adc_unlock(struct iio_dev *indio_dev)
 		regmap_update_bits(priv->regmap, MESON_SAR_ADC_DELAY,
 				   MESON_SAR_ADC_DELAY_KERNEL_BUSY, 0);
 
-	mutex_unlock(&indio_dev->mlock);
+	mutex_unlock(&priv->lock);
 }
 
 static void meson_sar_adc_clear_fifo(struct iio_dev *indio_dev)
@@ -1250,6 +1253,8 @@ static int meson_sar_adc_probe(struct platform_device *pdev)
 	if (ret)
 		goto err;
 
+	mutex_init(&priv->lock);
+
 	ret = meson_sar_adc_hw_enable(indio_dev);
 	if (ret)
 		goto err;

drivers/iio/adc/sc27xx_adc.c

@@ -4,6 +4,7 @@
 #include <linux/hwspinlock.h>
 #include <linux/iio/iio.h>
 #include <linux/module.h>
+#include <linux/mutex.h>
 #include <linux/nvmem-consumer.h>
 #include <linux/of.h>
 #include <linux/of_device.h>
@@ -83,6 +84,8 @@ struct sc27xx_adc_data {
 	struct device *dev;
 	struct regulator *volref;
 	struct regmap *regmap;
+	/* lock to protect against multiple access to the device */
+	struct mutex lock;
 	/*
 	 * One hardware spinlock to synchronize between the multiple
 	 * subsystems which will access the unique ADC controller.
@@ -664,9 +667,9 @@ static int sc27xx_adc_read_raw(struct iio_dev *indio_dev,
 
 	switch (mask) {
 	case IIO_CHAN_INFO_RAW:
-		mutex_lock(&indio_dev->mlock);
+		mutex_lock(&data->lock);
 		ret = sc27xx_adc_read(data, chan->channel, scale, &tmp);
-		mutex_unlock(&indio_dev->mlock);
+		mutex_unlock(&data->lock);
 
 		if (ret)
 			return ret;
@@ -675,10 +678,10 @@ static int sc27xx_adc_read_raw(struct iio_dev *indio_dev,
 		return IIO_VAL_INT;
 
 	case IIO_CHAN_INFO_PROCESSED:
-		mutex_lock(&indio_dev->mlock);
+		mutex_lock(&data->lock);
 		ret = sc27xx_adc_read_processed(data, chan->channel, scale,
 						&tmp);
-		mutex_unlock(&indio_dev->mlock);
+		mutex_unlock(&data->lock);
 
 		if (ret)
 			return ret;
@@ -934,6 +937,9 @@ static int sc27xx_adc_probe(struct platform_device *pdev)
 	indio_dev->info = &sc27xx_info;
 	indio_dev->channels = sc27xx_channels;
 	indio_dev->num_channels = ARRAY_SIZE(sc27xx_channels);
+
+	mutex_init(&sc27xx_data->lock);
+
 	ret = devm_iio_device_register(dev, indio_dev);
 	if (ret)
 		dev_err(dev, "could not register iio (ADC)");