PCI: tegra: Add Tegra194 PCIe support

Add support for Synopsys DesignWare core IP based PCIe host controller
present in the Tegra194 SoC.
Signed-off-by: Vidya Sagar <vidyas@nvidia.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Thierry Reding <treding@nvidia.com>

drivers/pci/controller/dwc/Kconfig

@@ -220,6 +220,16 @@ config PCI_MESON
 	  and therefore the driver re-uses the DesignWare core functions to
 	  implement the driver.
 
+config PCIE_TEGRA194
+	tristate "NVIDIA Tegra194 (and later) PCIe controller"
+	depends on ARCH_TEGRA_194_SOC || COMPILE_TEST
+	depends on PCI_MSI_IRQ_DOMAIN
+	select PCIE_DW_HOST
+	select PHY_TEGRA194_P2U
+	help
+	  Say Y here if you want support for DesignWare core based PCIe host
+	  controller found in NVIDIA Tegra194 SoC.
+
 config PCIE_UNIPHIER
 	bool "Socionext UniPhier PCIe controllers"
 	depends on ARCH_UNIPHIER || COMPILE_TEST

drivers/pci/controller/dwc/Makefile

@@ -15,6 +15,7 @@ obj-$(CONFIG_PCIE_ARTPEC6) += pcie-artpec6.o
 obj-$(CONFIG_PCIE_KIRIN) += pcie-kirin.o
 obj-$(CONFIG_PCIE_HISI_STB) += pcie-histb.o
 obj-$(CONFIG_PCI_MESON) += pci-meson.o
+obj-$(CONFIG_PCIE_TEGRA194) += pcie-tegra194.o
 obj-$(CONFIG_PCIE_UNIPHIER) += pcie-uniphier.o
 
 # The following drivers are for devices that use the generic ACPI

drivers/pci/controller/dwc/pcie-designware.c

@@ -456,7 +456,7 @@ int dw_pcie_wait_for_link(struct dw_pcie *pci)
 		usleep_range(LINK_WAIT_USLEEP_MIN, LINK_WAIT_USLEEP_MAX);
 	}
 
-	dev_err(pci->dev, "Phy link never came up\n");
+	dev_info(pci->dev, "Phy link never came up\n");
 
 	return -ETIMEDOUT;
 }