ARM: orion: Register DSA switch as a MDIO device

Utilize the ability to pass board specific MDIO bus information towards a
particular MDIO device thus allowing us to provide the per-port switch layout
to the Marvell 88E6XXX switch driver.

Since we would end-up with conflicting registration paths, do not register the
"dsa" platform device anymore.

Note that the MDIO devices registered by code in net/dsa/dsa2.c does not
parse a dsa_platform_data, but directly take a dsa_chip_data (specific
to a single switch chip), so we update the different call sites to pass
this structure down to orion_ge00_switch_init().
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

arch/arm/mach-orion5x/common.c

@@ -105,7 +105,7 @@ void __init orion5x_eth_init(struct mv643xx_eth_platform_data *eth_data)
 /*****************************************************************************
  * Ethernet switch
  ****************************************************************************/
-void __init orion5x_eth_switch_init(struct dsa_platform_data *d)
+void __init orion5x_eth_switch_init(struct dsa_chip_data *d)
 {
 	orion_ge00_switch_init(d);
 }

arch/arm/mach-orion5x/common.h

@@ -3,7 +3,7 @@
 
 #include <linux/reboot.h>
 
-struct dsa_platform_data;
+struct dsa_chip_data;
 struct mv643xx_eth_platform_data;
 struct mv_sata_platform_data;
 
@@ -41,7 +41,7 @@ void orion5x_setup_wins(void);
 void orion5x_ehci0_init(void);
 void orion5x_ehci1_init(void);
 void orion5x_eth_init(struct mv643xx_eth_platform_data *eth_data);
-void orion5x_eth_switch_init(struct dsa_platform_data *d);
+void orion5x_eth_switch_init(struct dsa_chip_data *d);
 void orion5x_i2c_init(void);
 void orion5x_sata_init(struct mv_sata_platform_data *sata_data);
 void orion5x_spi_init(void);

arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c

@@ -101,11 +101,6 @@ static struct dsa_chip_data rd88f5181l_fxo_switch_chip_data = {
 	.port_names[7]	= "lan3",
 };
 
-static struct dsa_platform_data __initdata rd88f5181l_fxo_switch_plat_data = {
-	.nr_chips	= 1,
-	.chip		= &rd88f5181l_fxo_switch_chip_data,
-};
-
 static void __init rd88f5181l_fxo_init(void)
 {
 	/*
@@ -120,7 +115,7 @@ static void __init rd88f5181l_fxo_init(void)
 	 */
 	orion5x_ehci0_init();
 	orion5x_eth_init(&rd88f5181l_fxo_eth_data);
-	orion5x_eth_switch_init(&rd88f5181l_fxo_switch_plat_data);
+	orion5x_eth_switch_init(&rd88f5181l_fxo_switch_chip_data);
 	orion5x_uart0_init();
 
 	mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET,

arch/arm/mach-orion5x/rd88f5181l-ge-setup.c

@@ -102,11 +102,6 @@ static struct dsa_chip_data rd88f5181l_ge_switch_chip_data = {
 	.port_names[7]	= "lan3",
 };
 
-static struct dsa_platform_data __initdata rd88f5181l_ge_switch_plat_data = {
-	.nr_chips	= 1,
-	.chip		= &rd88f5181l_ge_switch_chip_data,
-};
-
 static struct i2c_board_info __initdata rd88f5181l_ge_i2c_rtc = {
 	I2C_BOARD_INFO("ds1338", 0x68),
 };
@@ -125,7 +120,7 @@ static void __init rd88f5181l_ge_init(void)
 	 */
 	orion5x_ehci0_init();
 	orion5x_eth_init(&rd88f5181l_ge_eth_data);
-	orion5x_eth_switch_init(&rd88f5181l_ge_switch_plat_data);
+	orion5x_eth_switch_init(&rd88f5181l_ge_switch_chip_data);
 	orion5x_i2c_init();
 	orion5x_uart0_init();
 

arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c

@@ -40,11 +40,6 @@ static struct dsa_chip_data rd88f6183ap_ge_switch_chip_data = {
 	.port_names[5]	= "cpu",
 };
 
-static struct dsa_platform_data __initdata rd88f6183ap_ge_switch_plat_data = {
-	.nr_chips	= 1,
-	.chip		= &rd88f6183ap_ge_switch_chip_data,
-};
-
 static struct mtd_partition rd88f6183ap_ge_partitions[] = {
 	{
 		.name	= "kernel",
@@ -89,7 +84,7 @@ static void __init rd88f6183ap_ge_init(void)
 	 */
 	orion5x_ehci0_init();
 	orion5x_eth_init(&rd88f6183ap_ge_eth_data);
-	orion5x_eth_switch_init(&rd88f6183ap_ge_switch_plat_data);
+	orion5x_eth_switch_init(&rd88f6183ap_ge_switch_chip_data);
 	spi_register_board_info(rd88f6183ap_ge_spi_slave_info,
 				ARRAY_SIZE(rd88f6183ap_ge_spi_slave_info));
 	orion5x_spi_init();

arch/arm/mach-orion5x/wnr854t-setup.c

@@ -124,7 +124,7 @@ static void __init wnr854t_init(void)
 	 * Configure peripherals.
 	 */
 	orion5x_eth_init(&wnr854t_eth_data);
-	orion5x_eth_switch_init(&wnr854t_switch_plat_data);
+	orion5x_eth_switch_init(&wnr854t_switch_chip_data);
 	orion5x_uart0_init();
 
 	mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET,

arch/arm/mach-orion5x/wrt350n-v2-setup.c

@@ -191,11 +191,6 @@ static struct dsa_chip_data wrt350n_v2_switch_chip_data = {
 	.port_names[7]	= "lan4",
 };
 
-static struct dsa_platform_data __initdata wrt350n_v2_switch_plat_data = {
-	.nr_chips	= 1,
-	.chip		= &wrt350n_v2_switch_chip_data,
-};
-
 static void __init wrt350n_v2_init(void)
 {
 	/*
@@ -210,7 +205,7 @@ static void __init wrt350n_v2_init(void)
 	 */
 	orion5x_ehci0_init();
 	orion5x_eth_init(&wrt350n_v2_eth_data);
-	orion5x_eth_switch_init(&wrt350n_v2_switch_plat_data);
+	orion5x_eth_switch_init(&wrt350n_v2_switch_chip_data);
 	orion5x_uart0_init();
 
 	mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET,

arch/arm/plat-orion/common.c

@@ -22,6 +22,7 @@
 #include <linux/platform_data/dma-mv_xor.h>
 #include <linux/platform_data/usb-ehci-orion.h>
 #include <plat/common.h>
+#include <linux/phy.h>
 
 /* Create a clkdev entry for a given device/clk */
 void __init orion_clkdev_add(const char *con_id, const char *dev_id,
@@ -470,15 +471,27 @@ void __init orion_ge11_init(struct mv643xx_eth_platform_data *eth_data,
 /*****************************************************************************
  * Ethernet switch
  ****************************************************************************/
-void __init orion_ge00_switch_init(struct dsa_platform_data *d)
+static __initconst const char *orion_ge00_mvmdio_bus_name = "orion-mii";
+static __initdata struct mdio_board_info
+		  orion_ge00_switch_board_info;
+
+void __init orion_ge00_switch_init(struct dsa_chip_data *d)
 {
-	int i;
+	struct mdio_board_info *bd;
+	unsigned int i;
+
+	for (i = 0; i < ARRAY_SIZE(d->port_names); i++)
+		if (!strcmp(d->port_names[i], "cpu"))
+			break;
 
-	d->netdev = &orion_ge00.dev;
-	for (i = 0; i < d->nr_chips; i++)
-		d->chip[i].host_dev = &orion_ge_mvmdio.dev;
+	bd = &orion_ge00_switch_board_info;
+	bd->bus_id = orion_ge00_mvmdio_bus_name;
+	bd->mdio_addr = d->sw_addr;
+	d->netdev[i] = &orion_ge00.dev;
+	strcpy(bd->modalias, "mv88e6085");
+	bd->platform_data = d;
 
-	platform_device_register_data(NULL, "dsa", 0, d, sizeof(d));
+	mdiobus_register_board_info(&orion_ge00_switch_board_info, 1);
 }
 
 /*****************************************************************************

arch/arm/plat-orion/include/plat/common.h

@@ -12,7 +12,7 @@
 #include <linux/mv643xx_eth.h>
 #include <linux/platform_data/usb-ehci-orion.h>
 
-struct dsa_platform_data;
+struct dsa_chip_data;
 struct mv_sata_platform_data;
 
 void __init orion_uart0_init(void __iomem *membase,
@@ -57,7 +57,7 @@ void __init orion_ge11_init(struct mv643xx_eth_platform_data *eth_data,
 			    unsigned long mapbase,
 			    unsigned long irq);
 
-void __init orion_ge00_switch_init(struct dsa_platform_data *d);
+void __init orion_ge00_switch_init(struct dsa_chip_data *d);
 
 void __init orion_i2c_init(unsigned long mapbase,
 			   unsigned long irq,