Commit 5771a805 authored by Tony Prisk's avatar Tony Prisk Committed by Greg Kroah-Hartman

tty: serial: vt8500: Unneccessary duplicated clock code removed

Remove the extra code left over when the serial driver was changed
to require a clock. There is no fallback to 24Mhz as a clock is
now required.

Also remove a second call to of_clk_get which is unnecessary.
Signed-off-by: default avatarTony Prisk <linux@prisktech.co.nz>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent 09081e5b
...@@ -611,14 +611,7 @@ static int vt8500_serial_probe(struct platform_device *pdev) ...@@ -611,14 +611,7 @@ static int vt8500_serial_probe(struct platform_device *pdev)
vt8500_port->uart.dev = &pdev->dev; vt8500_port->uart.dev = &pdev->dev;
vt8500_port->uart.flags = UPF_IOREMAP | UPF_BOOT_AUTOCONF; vt8500_port->uart.flags = UPF_IOREMAP | UPF_BOOT_AUTOCONF;
vt8500_port->clk = of_clk_get(pdev->dev.of_node, 0);
if (!IS_ERR(vt8500_port->clk)) {
vt8500_port->uart.uartclk = clk_get_rate(vt8500_port->clk); vt8500_port->uart.uartclk = clk_get_rate(vt8500_port->clk);
} else {
/* use the default of 24Mhz if not specified and warn */
pr_warn("%s: serial clock source not specified\n", __func__);
vt8500_port->uart.uartclk = 24000000;
}
snprintf(vt8500_port->name, sizeof(vt8500_port->name), snprintf(vt8500_port->name, sizeof(vt8500_port->name),
"VT8500 UART%d", pdev->id); "VT8500 UART%d", pdev->id);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment