ath10k: Remove qca98xx hw1.0 support

Since the firmware support is no longer available for hw1.0,
drop all code (especially workarounds) for those units.
Signed-off-by: Bartosz Markowski <bartosz.markowski@tieto.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>

drivers/net/wireless/ath/ath10k/ce.c

@@ -76,36 +76,7 @@ static inline void ath10k_ce_src_ring_write_index_set(struct ath10k *ar,
 						      u32 ce_ctrl_addr,
 						      unsigned int n)
 {
-	struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
-	void __iomem *indicator_addr;
-
-	if (!test_bit(ATH10K_PCI_FEATURE_HW_1_0_WORKAROUND, ar_pci->features)) {
-		ath10k_pci_write32(ar, ce_ctrl_addr + SR_WR_INDEX_ADDRESS, n);
-		return;
-	}
-
-	/* workaround for QCA988x_1.0 HW CE */
-	indicator_addr = ar_pci->mem + ce_ctrl_addr + DST_WATERMARK_ADDRESS;
-
-	if (ce_ctrl_addr == ath10k_ce_base_address(CDC_WAR_DATA_CE)) {
-		iowrite32((CDC_WAR_MAGIC_STR | n), indicator_addr);
-	} else {
-		unsigned long irq_flags;
-		local_irq_save(irq_flags);
-		iowrite32(1, indicator_addr);
-
-		/*
-		 * PCIE write waits for ACK in IPQ8K, there is no
-		 * need to read back value.
-		 */
-		(void)ioread32(indicator_addr);
-		(void)ioread32(indicator_addr); /* conservative */
-
-		ath10k_pci_write32(ar, ce_ctrl_addr + SR_WR_INDEX_ADDRESS, n);
-
-		iowrite32(0, indicator_addr);
-		local_irq_restore(irq_flags);
-	}
+	ath10k_pci_write32(ar, ce_ctrl_addr + SR_WR_INDEX_ADDRESS, n);
 }
 
 static inline u32 ath10k_ce_src_ring_write_index_get(struct ath10k *ar,

drivers/net/wireless/ath/ath10k/core.c

@@ -38,17 +38,6 @@ MODULE_PARM_DESC(uart_print, "Uart target debugging");
 MODULE_PARM_DESC(p2p, "Enable ath10k P2P support");
 
 static const struct ath10k_hw_params ath10k_hw_params_list[] = {
-	{
-		.id = QCA988X_HW_1_0_VERSION,
-		.name = "qca988x hw1.0",
-		.patch_load_addr = QCA988X_HW_1_0_PATCH_LOAD_ADDR,
-		.fw = {
-			.dir = QCA988X_HW_1_0_FW_DIR,
-			.fw = QCA988X_HW_1_0_FW_FILE,
-			.otp = QCA988X_HW_1_0_OTP_FILE,
-			.board = QCA988X_HW_1_0_BOARD_DATA_FILE,
-		},
-	},
 	{
 		.id = QCA988X_HW_2_0_VERSION,
 		.name = "qca988x hw2.0",

drivers/net/wireless/ath/ath10k/hw.h

@@ -26,14 +26,6 @@
 #define SUPPORTED_FW_RELEASE	0
 #define SUPPORTED_FW_BUILD	629
 
-/* QCA988X 1.0 definitions */
-#define QCA988X_HW_1_0_VERSION		0x4000002c
-#define QCA988X_HW_1_0_FW_DIR		"ath10k/QCA988X/hw1.0"
-#define QCA988X_HW_1_0_FW_FILE		"firmware.bin"
-#define QCA988X_HW_1_0_OTP_FILE		"otp.bin"
-#define QCA988X_HW_1_0_BOARD_DATA_FILE	"board.bin"
-#define QCA988X_HW_1_0_PATCH_LOAD_ADDR	0x1234
-
 /* QCA988X 2.0 definitions */
 #define QCA988X_HW_2_0_VERSION		0x4100016c
 #define QCA988X_HW_2_0_FW_DIR		"ath10k/QCA988X/hw2.0"

drivers/net/wireless/ath/ath10k/pci.c

@@ -36,11 +36,9 @@ static unsigned int ath10k_target_ps;
 module_param(ath10k_target_ps, uint, 0644);
 MODULE_PARM_DESC(ath10k_target_ps, "Enable ath10k Target (SoC) PS option");
 
-#define QCA988X_1_0_DEVICE_ID	(0xabcd)
 #define QCA988X_2_0_DEVICE_ID	(0x003c)
 
 static DEFINE_PCI_DEVICE_TABLE(ath10k_pci_id_table) = {
-	{ PCI_VDEVICE(ATHEROS, QCA988X_1_0_DEVICE_ID) }, /* PCI-E QCA988X V1 */
 	{ PCI_VDEVICE(ATHEROS, QCA988X_2_0_DEVICE_ID) }, /* PCI-E QCA988X V2 */
 	{0}
 };
@@ -2269,9 +2267,6 @@ static void ath10k_pci_dump_features(struct ath10k_pci *ar_pci)
 		case ATH10K_PCI_FEATURE_MSI_X:
 			ath10k_dbg(ATH10K_DBG_PCI, "device supports MSI-X\n");
 			break;
-		case ATH10K_PCI_FEATURE_HW_1_0_WORKAROUND:
-			ath10k_dbg(ATH10K_DBG_PCI, "QCA988X_1.0 workaround enabled\n");
-			break;
 		case ATH10K_PCI_FEATURE_SOC_POWER_SAVE:
 			ath10k_dbg(ATH10K_DBG_PCI, "QCA98XX SoC power save enabled\n");
 			break;
@@ -2298,9 +2293,6 @@ static int ath10k_pci_probe(struct pci_dev *pdev,
 	ar_pci->dev = &pdev->dev;
 
 	switch (pci_dev->device) {
-	case QCA988X_1_0_DEVICE_ID:
-		set_bit(ATH10K_PCI_FEATURE_HW_1_0_WORKAROUND, ar_pci->features);
-		break;
 	case QCA988X_2_0_DEVICE_ID:
 		set_bit(ATH10K_PCI_FEATURE_MSI_X, ar_pci->features);
 		break;
@@ -2322,10 +2314,6 @@ static int ath10k_pci_probe(struct pci_dev *pdev,
 		goto err_ar_pci;
 	}
 
-	/* Enable QCA988X_1.0 HW workarounds */
-	if (test_bit(ATH10K_PCI_FEATURE_HW_1_0_WORKAROUND, ar_pci->features))
-		spin_lock_init(&ar_pci->hw_v1_workaround_lock);
-
 	ar_pci->ar = ar;
 	ar_pci->fw_indicator_address = FW_INDICATOR_ADDRESS;
 	atomic_set(&ar_pci->keep_awake_count, 0);
@@ -2483,9 +2471,6 @@ module_exit(ath10k_pci_exit);
 MODULE_AUTHOR("Qualcomm Atheros");
 MODULE_DESCRIPTION("Driver support for Atheros QCA988X PCIe devices");
 MODULE_LICENSE("Dual BSD/GPL");
-MODULE_FIRMWARE(QCA988X_HW_1_0_FW_DIR "/" QCA988X_HW_1_0_FW_FILE);
-MODULE_FIRMWARE(QCA988X_HW_1_0_FW_DIR "/" QCA988X_HW_1_0_OTP_FILE);
-MODULE_FIRMWARE(QCA988X_HW_1_0_FW_DIR "/" QCA988X_HW_1_0_BOARD_DATA_FILE);
 MODULE_FIRMWARE(QCA988X_HW_2_0_FW_DIR "/" QCA988X_HW_2_0_FW_FILE);
 MODULE_FIRMWARE(QCA988X_HW_2_0_FW_DIR "/" QCA988X_HW_2_0_OTP_FILE);
 MODULE_FIRMWARE(QCA988X_HW_2_0_FW_DIR "/" QCA988X_HW_2_0_BOARD_DATA_FILE);

drivers/net/wireless/ath/ath10k/pci.h

@@ -152,8 +152,7 @@ struct service_to_pipe {
 
 enum ath10k_pci_features {
 	ATH10K_PCI_FEATURE_MSI_X		= 0,
-	ATH10K_PCI_FEATURE_HW_1_0_WORKAROUND	= 1,
-	ATH10K_PCI_FEATURE_SOC_POWER_SAVE	= 2,
+	ATH10K_PCI_FEATURE_SOC_POWER_SAVE	= 1,
 
 	/* keep last */
 	ATH10K_PCI_FEATURE_COUNT
@@ -234,9 +233,6 @@ struct ath10k_pci {
 
 	/* Map CE id to ce_state */
 	struct ce_state *ce_id_to_state[CE_COUNT_MAX];
-
-	/* makes sure that dummy reads are atomic */
-	spinlock_t hw_v1_workaround_lock;
 };
 
 static inline struct ath10k_pci *ath10k_pci_priv(struct ath10k *ar)
@@ -310,23 +306,8 @@ static inline void ath10k_pci_write32(struct ath10k *ar, u32 offset,
 				      u32 value)
 {
 	struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
-	void __iomem *addr = ar_pci->mem;
-
-	if (test_bit(ATH10K_PCI_FEATURE_HW_1_0_WORKAROUND, ar_pci->features)) {
-		unsigned long irq_flags;
-
-		spin_lock_irqsave(&ar_pci->hw_v1_workaround_lock, irq_flags);
-
-		ioread32(addr+offset+4); /* 3rd read prior to write */
-		ioread32(addr+offset+4); /* 2nd read prior to write */
-		ioread32(addr+offset+4); /* 1st read prior to write */
-		iowrite32(value, addr+offset);
 
-		spin_unlock_irqrestore(&ar_pci->hw_v1_workaround_lock,
-				       irq_flags);
-	} else {
-		iowrite32(value, addr+offset);
-	}
+	iowrite32(value, ar_pci->mem + offset);
 }
 
 static inline u32 ath10k_pci_read32(struct ath10k *ar, u32 offset)