Merge branch 'stmmac-fixes'

Yuji Ishikawa says:

====================
net: stmmac: dwmac-visconti: Fix bit definitions and clock configuration for RMII mode

This series is a fix for RMII/MII operation mode of the dwmac-visconti driver.
It is composed of two parts:

* 1/2: fix constant definitions for cleared bits in ETHER_CLK_SEL register
* 2/2: fix configuration of ETHER_CLK_SEL register for running in RMII operation mode.

  net: stmmac: dwmac-visconti: Fix bit definitions for ETHER_CLK_SEL
    v1 -> v2:
      - added Fixes tag to commit message

  net: stmmac: dwmac-visconti: Fix clock configuration for RMII mode
    v1 -> v2:
      - added Fixes tag to commit message
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/stmicro/stmmac/dwmac-visconti.c

@@ -22,21 +22,21 @@
 #define ETHER_CLK_SEL_RMII_CLK_EN BIT(2)
 #define ETHER_CLK_SEL_RMII_CLK_RST BIT(3)
 #define ETHER_CLK_SEL_DIV_SEL_2 BIT(4)
-#define ETHER_CLK_SEL_DIV_SEL_20 BIT(0)
+#define ETHER_CLK_SEL_DIV_SEL_20 0
 #define ETHER_CLK_SEL_FREQ_SEL_125M	(BIT(9) | BIT(8))
 #define ETHER_CLK_SEL_FREQ_SEL_50M	BIT(9)
 #define ETHER_CLK_SEL_FREQ_SEL_25M	BIT(8)
 #define ETHER_CLK_SEL_FREQ_SEL_2P5M	0
-#define ETHER_CLK_SEL_TX_CLK_EXT_SEL_IN BIT(0)
+#define ETHER_CLK_SEL_TX_CLK_EXT_SEL_IN 0
 #define ETHER_CLK_SEL_TX_CLK_EXT_SEL_TXC BIT(10)
 #define ETHER_CLK_SEL_TX_CLK_EXT_SEL_DIV BIT(11)
-#define ETHER_CLK_SEL_RX_CLK_EXT_SEL_IN  BIT(0)
+#define ETHER_CLK_SEL_RX_CLK_EXT_SEL_IN  0
 #define ETHER_CLK_SEL_RX_CLK_EXT_SEL_RXC BIT(12)
 #define ETHER_CLK_SEL_RX_CLK_EXT_SEL_DIV BIT(13)
-#define ETHER_CLK_SEL_TX_CLK_O_TX_I	 BIT(0)
+#define ETHER_CLK_SEL_TX_CLK_O_TX_I	 0
 #define ETHER_CLK_SEL_TX_CLK_O_RMII_I	 BIT(14)
 #define ETHER_CLK_SEL_TX_O_E_N_IN	 BIT(15)
-#define ETHER_CLK_SEL_RMII_CLK_SEL_IN	 BIT(0)
+#define ETHER_CLK_SEL_RMII_CLK_SEL_IN	 0
 #define ETHER_CLK_SEL_RMII_CLK_SEL_RX_C	 BIT(16)
 
 #define ETHER_CLK_SEL_RX_TX_CLK_EN (ETHER_CLK_SEL_RX_CLK_EN | ETHER_CLK_SEL_TX_CLK_EN)
@@ -96,30 +96,40 @@ static void visconti_eth_fix_mac_speed(void *priv, unsigned int speed)
 	val |= ETHER_CLK_SEL_TX_O_E_N_IN;
 	writel(val, dwmac->reg + REG_ETHER_CLOCK_SEL);
 
+	/* Set Clock-Mux, Start clock, Set TX_O direction */
 	switch (dwmac->phy_intf_sel) {
 	case ETHER_CONFIG_INTF_RGMII:
 		val = clk_sel_val | ETHER_CLK_SEL_RX_CLK_EXT_SEL_RXC;
+		writel(val, dwmac->reg + REG_ETHER_CLOCK_SEL);
+
+		val |= ETHER_CLK_SEL_RX_TX_CLK_EN;
+		writel(val, dwmac->reg + REG_ETHER_CLOCK_SEL);
+
+		val &= ~ETHER_CLK_SEL_TX_O_E_N_IN;
+		writel(val, dwmac->reg + REG_ETHER_CLOCK_SEL);
 		break;
 	case ETHER_CONFIG_INTF_RMII:
 		val = clk_sel_val | ETHER_CLK_SEL_RX_CLK_EXT_SEL_DIV |
-			ETHER_CLK_SEL_TX_CLK_EXT_SEL_TXC | ETHER_CLK_SEL_TX_O_E_N_IN |
+			ETHER_CLK_SEL_TX_CLK_EXT_SEL_DIV | ETHER_CLK_SEL_TX_O_E_N_IN |
 			ETHER_CLK_SEL_RMII_CLK_SEL_RX_C;
+		writel(val, dwmac->reg + REG_ETHER_CLOCK_SEL);
+
+		val |= ETHER_CLK_SEL_RMII_CLK_RST;
+		writel(val, dwmac->reg + REG_ETHER_CLOCK_SEL);
+
+		val |= ETHER_CLK_SEL_RMII_CLK_EN | ETHER_CLK_SEL_RX_TX_CLK_EN;
+		writel(val, dwmac->reg + REG_ETHER_CLOCK_SEL);
 		break;
 	case ETHER_CONFIG_INTF_MII:
 	default:
 		val = clk_sel_val | ETHER_CLK_SEL_RX_CLK_EXT_SEL_RXC |
-			ETHER_CLK_SEL_TX_CLK_EXT_SEL_DIV | ETHER_CLK_SEL_TX_O_E_N_IN |
-			ETHER_CLK_SEL_RMII_CLK_EN;
-		break;
-	}
-
-	/* Start clock */
-	writel(val, dwmac->reg + REG_ETHER_CLOCK_SEL);
-	val |= ETHER_CLK_SEL_RX_TX_CLK_EN;
+			ETHER_CLK_SEL_TX_CLK_EXT_SEL_TXC | ETHER_CLK_SEL_TX_O_E_N_IN;
 		writel(val, dwmac->reg + REG_ETHER_CLOCK_SEL);
 
-	val &= ~ETHER_CLK_SEL_TX_O_E_N_IN;
+		val |= ETHER_CLK_SEL_RX_TX_CLK_EN;
 		writel(val, dwmac->reg + REG_ETHER_CLOCK_SEL);
+		break;
+	}
 
 	spin_unlock_irqrestore(&dwmac->lock, flags);
 }