Commit 57d30230 authored by Daniel Vetter's avatar Daniel Vetter

drm/doc: vblank cleanup

Unify and review everything, plus make sure it's all correct markup.
Drop the kernel-doc for internal functions. Also rework the overview
section, it's become rather outdated.

Unfortuantely the kernel-doc in drm_driver isn't rendered yet, but
that will change as soon as drm_driver is kernel-docified properly.

Also document properly that drm_vblank_cleanup is optional, the core
calls this already.

v2: Make it clear that cleanup happens in drm_dev_fini for drivers
with their own ->release callback (Thierry).
Acked-by: default avatarThierry Reding <treding@nvidia.com>
Signed-off-by: default avatarDaniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170524145212.27837-11-daniel.vetter@ffwll.ch
parent 27fa5510
......@@ -551,60 +551,8 @@ various modules/drivers.
Vertical Blanking
=================
Vertical blanking plays a major role in graphics rendering. To achieve
tear-free display, users must synchronize page flips and/or rendering to
vertical blanking. The DRM API offers ioctls to perform page flips
synchronized to vertical blanking and wait for vertical blanking.
The DRM core handles most of the vertical blanking management logic,
which involves filtering out spurious interrupts, keeping race-free
blanking counters, coping with counter wrap-around and resets and
keeping use counts. It relies on the driver to generate vertical
blanking interrupts and optionally provide a hardware vertical blanking
counter. Drivers must implement the following operations.
- int (\*enable_vblank) (struct drm_device \*dev, int crtc); void
(\*disable_vblank) (struct drm_device \*dev, int crtc);
Enable or disable vertical blanking interrupts for the given CRTC.
- u32 (\*get_vblank_counter) (struct drm_device \*dev, int crtc);
Retrieve the value of the vertical blanking counter for the given
CRTC. If the hardware maintains a vertical blanking counter its value
should be returned. Otherwise drivers can use the
:c:func:`drm_vblank_count()` helper function to handle this
operation.
Drivers must initialize the vertical blanking handling core with a call
to :c:func:`drm_vblank_init()` in their load operation.
Vertical blanking interrupts can be enabled by the DRM core or by
drivers themselves (for instance to handle page flipping operations).
The DRM core maintains a vertical blanking use count to ensure that the
interrupts are not disabled while a user still needs them. To increment
the use count, drivers call :c:func:`drm_vblank_get()`. Upon
return vertical blanking interrupts are guaranteed to be enabled.
To decrement the use count drivers call
:c:func:`drm_vblank_put()`. Only when the use count drops to zero
will the DRM core disable the vertical blanking interrupts after a delay
by scheduling a timer. The delay is accessible through the
vblankoffdelay module parameter or the ``drm_vblank_offdelay`` global
variable and expressed in milliseconds. Its default value is 5000 ms.
Zero means never disable, and a negative value means disable
immediately. Drivers may override the behaviour by setting the
:c:type:`struct drm_device <drm_device>`
vblank_disable_immediate flag, which when set causes vblank interrupts
to be disabled immediately regardless of the drm_vblank_offdelay
value. The flag should only be set if there's a properly working
hardware vblank counter present.
When a vertical blanking interrupt occurs drivers only need to call the
:c:func:`drm_handle_vblank()` function to account for the
interrupt.
Resources allocated by :c:func:`drm_vblank_init()` must be freed
with a call to :c:func:`drm_vblank_cleanup()` in the driver unload
operation handler.
.. kernel-doc:: drivers/gpu/drm/drm_vblank.c
:doc: vblank handling
Vertical Blanking and Interrupt Handling Functions Reference
------------------------------------------------------------
......
......@@ -31,6 +31,41 @@
#include "drm_trace.h"
#include "drm_internal.h"
/**
* DOC: vblank handling
*
* Vertical blanking plays a major role in graphics rendering. To achieve
* tear-free display, users must synchronize page flips and/or rendering to
* vertical blanking. The DRM API offers ioctls to perform page flips
* synchronized to vertical blanking and wait for vertical blanking.
*
* The DRM core handles most of the vertical blanking management logic, which
* involves filtering out spurious interrupts, keeping race-free blanking
* counters, coping with counter wrap-around and resets and keeping use counts.
* It relies on the driver to generate vertical blanking interrupts and
* optionally provide a hardware vertical blanking counter.
*
* Drivers must initialize the vertical blanking handling core with a call to
* drm_vblank_init(). Minimally, a driver needs to implement
* &drm_crtc_funcs.enable_vblank and &drm_crtc_funcs.disable_vblank plus call
* drm_crtc_handle_vblank() in it's vblank interrupt handler for working vblank
* support.
*
* Vertical blanking interrupts can be enabled by the DRM core or by drivers
* themselves (for instance to handle page flipping operations). The DRM core
* maintains a vertical blanking use count to ensure that the interrupts are not
* disabled while a user still needs them. To increment the use count, drivers
* call drm_crtc_vblank_get() and release the vblank reference again with
* drm_crtc_vblank_put(). In between these two calls vblank interrupts are
* guaranteed to be enabled.
*
* On many hardware disabling the vblank interrupt cannot be done in a race-free
* manner, see &drm_driver.vblank_disable_immediate and
* &drm_driver.max_vblank_count. In that case the vblank core only disables the
* vblanks after a timer has expired, which can be configured through the
* ``vblankoffdelay`` module parameter.
*/
/* Retry timestamp calculation up to 3 times to satisfy
* drm_timestamp_precision before giving up.
*/
......@@ -262,11 +297,12 @@ static u32 drm_vblank_count(struct drm_device *dev, unsigned int pipe)
* drm_accurate_vblank_count - retrieve the master vblank counter
* @crtc: which counter to retrieve
*
* This function is similar to @drm_crtc_vblank_count but this
* function interpolates to handle a race with vblank irq's.
* This function is similar to drm_crtc_vblank_count() but this function
* interpolates to handle a race with vblank interrupts using the high precision
* timestamping support.
*
* This is mostly useful for hardware that can obtain the scanout
* position, but doesn't have a frame counter.
* This is mostly useful for hardware that can obtain the scanout position, but
* doesn't have a hardware frame counter.
*/
u32 drm_accurate_vblank_count(struct drm_crtc *crtc)
{
......@@ -362,10 +398,14 @@ static void vblank_disable_fn(unsigned long arg)
* drm_vblank_cleanup - cleanup vblank support
* @dev: DRM device
*
* This function cleans up any resources allocated in drm_vblank_init.
* This function cleans up any resources allocated in drm_vblank_init(). It is
* called by the DRM core when @dev is finalized.
*
* Drivers can call drm_vblank_cleanup() if they need to quiescent the vblank
* interrupt in their unload code. But in general this should be handled by
* disabling all active &drm_crtc through e.g. drm_atomic_helper_shutdown, which
* should end up calling drm_crtc_vblank_off().
*
* Drivers which don't use drm_irq_install() need to set &drm_device.irq_enabled
* themselves, to signal to the DRM core that vblank interrupts are enabled.
*/
void drm_vblank_cleanup(struct drm_device *dev)
{
......@@ -396,6 +436,9 @@ EXPORT_SYMBOL(drm_vblank_cleanup);
* @num_crtcs: number of CRTCs supported by @dev
*
* This function initializes vblank support for @num_crtcs display pipelines.
* Drivers do not need to call drm_vblank_cleanup(), cleanup is already handled
* by the DRM core, or through calling drm_dev_fini() for drivers with a
* &drm_driver.release callback.
*
* Returns:
* Zero on success or a negative error code on failure.
......@@ -468,11 +511,11 @@ EXPORT_SYMBOL(drm_crtc_vblank_waitqueue);
* @crtc: drm_crtc whose timestamp constants should be updated.
* @mode: display mode containing the scanout timings
*
* Calculate and store various constants which are later
* needed by vblank and swap-completion timestamping, e.g,
* by drm_calc_vbltimestamp_from_scanoutpos(). They are
* derived from CRTC's true scanout timing, so they take
* things like panel scaling or other adjustments into account.
* Calculate and store various constants which are later needed by vblank and
* swap-completion timestamping, e.g, by
* drm_calc_vbltimestamp_from_scanoutpos(). They are derived from CRTC's true
* scanout timing, so they take things like panel scaling or other adjustments
* into account.
*/
void drm_calc_timestamping_constants(struct drm_crtc *crtc,
const struct drm_display_mode *mode)
......@@ -535,25 +578,14 @@ EXPORT_SYMBOL(drm_calc_timestamping_constants);
* if flag is set.
*
* Implements calculation of exact vblank timestamps from given drm_display_mode
* timings and current video scanout position of a CRTC. This can be called from
* within get_vblank_timestamp() implementation of a kms driver to implement the
* actual timestamping.
*
* Should return timestamps conforming to the OML_sync_control OpenML
* extension specification. The timestamp corresponds to the end of
* the vblank interval, aka start of scanout of topmost-leftmost display
* pixel in the following video frame.
*
* Requires support for optional dev->driver->get_scanout_position()
* in kms driver, plus a bit of setup code to provide a drm_display_mode
* that corresponds to the true scanout timing.
* timings and current video scanout position of a CRTC. This can be directly
* used as the &drm_driver.get_vblank_timestamp implementation of a kms driver
* if &drm_driver.get_scanout_position is implemented.
*
* The current implementation only handles standard video modes. It
* returns as no operation if a doublescan or interlaced video mode is
* active. Higher level code is expected to handle this.
*
* This function can be used to implement the &drm_driver.get_vblank_timestamp
* directly, if the driver implements the &drm_driver.get_scanout_position hook.
* The current implementation only handles standard video modes. For double scan
* and interlaced modes the driver is supposed to adjust the hardware mode
* (taken from &drm_crtc_state.adjusted mode for atomic modeset drivers) to
* match the scanout position reported.
*
* Note that atomic drivers must call drm_calc_timestamping_constants() before
* enabling a CRTC. The atomic helpers already take care of that in
......@@ -738,7 +770,9 @@ drm_get_last_vbltimestamp(struct drm_device *dev, unsigned int pipe,
*
* Fetches the "cooked" vblank count value that represents the number of
* vblank events since the system was booted, including lost events due to
* modesetting activity.
* modesetting activity. Note that this timer isn't correct against a racing
* vblank interrupt (since it only reports the software vblank counter), see
* drm_accurate_vblank_count() for such use-cases.
*
* Returns:
* The software vblank counter.
......@@ -749,20 +783,6 @@ u32 drm_crtc_vblank_count(struct drm_crtc *crtc)
}
EXPORT_SYMBOL(drm_crtc_vblank_count);
/**
* drm_vblank_count_and_time - retrieve "cooked" vblank counter value and the
* system timestamp corresponding to that vblank counter value.
* @dev: DRM device
* @pipe: index of CRTC whose counter to retrieve
* @vblanktime: Pointer to struct timeval to receive the vblank timestamp.
*
* Fetches the "cooked" vblank count value that represents the number of
* vblank events since the system was booted, including lost events due to
* modesetting activity. Returns corresponding system timestamp of the time
* of the vblank interval that corresponds to the current vblank counter value.
*
* This is the legacy version of drm_crtc_vblank_count_and_time().
*/
static u32 drm_vblank_count_and_time(struct drm_device *dev, unsigned int pipe,
struct timeval *vblanktime)
{
......@@ -852,8 +872,8 @@ static void send_vblank_event(struct drm_device *dev,
* handler by calling drm_crtc_send_vblank_event() and make sure that there's no
* possible race with the hardware committing the atomic update.
*
* Caller must hold event lock. Caller must also hold a vblank reference for
* the event @e, which will be dropped when the next vblank arrives.
* Caller must hold a vblank reference for the event @e, which will be dropped
* when the next vblank arrives.
*/
void drm_crtc_arm_vblank_event(struct drm_crtc *crtc,
struct drm_pending_vblank_event *e)
......@@ -913,14 +933,6 @@ static int __enable_vblank(struct drm_device *dev, unsigned int pipe)
return dev->driver->enable_vblank(dev, pipe);
}
/**
* drm_vblank_enable - enable the vblank interrupt on a CRTC
* @dev: DRM device
* @pipe: CRTC index
*
* Returns:
* Zero on success or a negative error code on failure.
*/
static int drm_vblank_enable(struct drm_device *dev, unsigned int pipe)
{
struct drm_vblank_crtc *vblank = &dev->vblank[pipe];
......@@ -958,19 +970,6 @@ static int drm_vblank_enable(struct drm_device *dev, unsigned int pipe)
return ret;
}
/**
* drm_vblank_get - get a reference count on vblank events
* @dev: DRM device
* @pipe: index of CRTC to own
*
* Acquire a reference count on vblank events to avoid having them disabled
* while in use.
*
* This is the legacy version of drm_crtc_vblank_get().
*
* Returns:
* Zero on success or a negative error code on failure.
*/
static int drm_vblank_get(struct drm_device *dev, unsigned int pipe)
{
struct drm_vblank_crtc *vblank = &dev->vblank[pipe];
......@@ -1014,16 +1013,6 @@ int drm_crtc_vblank_get(struct drm_crtc *crtc)
}
EXPORT_SYMBOL(drm_crtc_vblank_get);
/**
* drm_vblank_put - release ownership of vblank events
* @dev: DRM device
* @pipe: index of CRTC to release
*
* Release ownership of a given vblank counter, turning off interrupts
* if possible. Disable interrupts after drm_vblank_offdelay milliseconds.
*
* This is the legacy version of drm_crtc_vblank_put().
*/
static void drm_vblank_put(struct drm_device *dev, unsigned int pipe)
{
struct drm_vblank_crtc *vblank = &dev->vblank[pipe];
......@@ -1067,6 +1056,8 @@ EXPORT_SYMBOL(drm_crtc_vblank_put);
* This waits for one vblank to pass on @pipe, using the irq driver interfaces.
* It is a failure to call this when the vblank irq for @pipe is disabled, e.g.
* due to lack of driver support or because the crtc is off.
*
* This is the legacy version of drm_crtc_wait_one_vblank().
*/
void drm_wait_one_vblank(struct drm_device *dev, unsigned int pipe)
{
......@@ -1116,7 +1107,7 @@ EXPORT_SYMBOL(drm_crtc_wait_one_vblank);
* stored so that drm_vblank_on can restore it again.
*
* Drivers must use this function when the hardware vblank counter can get
* reset, e.g. when suspending.
* reset, e.g. when suspending or disabling the @crtc in general.
*/
void drm_crtc_vblank_off(struct drm_crtc *crtc)
{
......@@ -1184,6 +1175,8 @@ EXPORT_SYMBOL(drm_crtc_vblank_off);
* drm_crtc_vblank_on() functions. The difference compared to
* drm_crtc_vblank_off() is that this function doesn't save the vblank counter
* and hence doesn't need to call any driver hooks.
*
* This is useful for recovering driver state e.g. on driver load, or on resume.
*/
void drm_crtc_vblank_reset(struct drm_crtc *crtc)
{
......@@ -1212,9 +1205,10 @@ EXPORT_SYMBOL(drm_crtc_vblank_reset);
* @crtc: CRTC in question
*
* This functions restores the vblank interrupt state captured with
* drm_crtc_vblank_off() again. Note that calls to drm_crtc_vblank_on() and
* drm_crtc_vblank_off() can be unbalanced and so can also be unconditionally called
* in driver load code to reflect the current hardware state of the crtc.
* drm_crtc_vblank_off() again and is generally called when enabling @crtc. Note
* that calls to drm_crtc_vblank_on() and drm_crtc_vblank_off() can be
* unbalanced and so can also be unconditionally called in driver load code to
* reflect the current hardware state of the crtc.
*/
void drm_crtc_vblank_on(struct drm_crtc *crtc)
{
......
......@@ -387,22 +387,49 @@ struct drm_device {
bool irq_enabled;
int irq;
/*
/**
* @vblank_disable_immediate:
*
* If true, vblank interrupt will be disabled immediately when the
* refcount drops to zero, as opposed to via the vblank disable
* timer.
* This can be set to true it the hardware has a working vblank
* counter and the driver uses drm_vblank_on() and drm_vblank_off()
* appropriately.
*
* This can be set to true it the hardware has a working vblank counter
* with high-precision timestamping (otherwise there are races) and the
* driver uses drm_crtc_vblank_on() and drm_crtc_vblank_off()
* appropriately. See also @max_vblank_count and
* &drm_crtc_funcs.get_vblank_counter.
*/
bool vblank_disable_immediate;
/* array of size num_crtcs */
/**
* @vblank:
*
* Array of vblank tracking structures, one per &struct drm_crtc. For
* historical reasons (vblank support predates kernel modesetting) this
* is free-standing and not part of &struct drm_crtc itself. It must be
* initialized explicitly by calling drm_vblank_init().
*/
struct drm_vblank_crtc *vblank;
spinlock_t vblank_time_lock; /**< Protects vblank count and time updates during vblank enable/disable */
spinlock_t vbl_lock;
/**
* @max_vblank_count:
*
* Maximum value of the vblank registers. This value +1 will result in a
* wrap-around of the vblank register. It is used by the vblank core to
* handle wrap-arounds.
*
* If set to zero the vblank core will try to guess the elapsed vblanks
* between times when the vblank interrupt is disabled through
* high-precision timestamps. That approach is suffering from small
* races and imprecision over longer time periods, hence exposing a
* hardware vblank counter is always recommended.
*
* If non-zeor, &drm_crtc_funcs.get_vblank_counter must be set.
*/
u32 max_vblank_count; /**< size of vblank counter register */
/**
......
......@@ -685,6 +685,9 @@ struct drm_crtc_funcs {
* drm_crtc_vblank_off() and drm_crtc_vblank_on() when disabling or
* enabling a CRTC.
*
* See also &drm_device.vblank_disable_immediate and
* &drm_device.max_vblank_count.
*
* Returns:
*
* Raw vblank counter value.
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment