Commit 57f0a7ea authored by Kumar Gala's avatar Kumar Gala Committed by Olof Johansson

arm64: dts: Add Qualcomm MSM8916 SoC and evaluation board dts

Add initial device tree support for Qualcomm MSM8916 SoC and MTP8916
evaluation board.  At the current time we only boot up a single processor.
Signed-off-by: default avatarKumar Gala <galak@codeaurora.org>
Signed-off-by: default avatarOlof Johansson <olof@lixom.net>
parent 3341ada4
......@@ -5,6 +5,7 @@ dts-dirs += cavium
dts-dirs += exynos
dts-dirs += freescale
dts-dirs += mediatek
dts-dirs += qcom
dts-dirs += sprd
dts-dirs += xilinx
......
dtb-$(CONFIG_ARCH_QCOM) += msm8916-mtp.dtb
always := $(dtb-y)
subdir-y := $(dts-dirs)
clean-files := *.dtb
/*
* Copyright (c) 2014-2015, The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
* only version 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
/dts-v1/;
#include "msm8916-mtp.dtsi"
/ {
model = "Qualcomm Technologies, Inc. MSM 8916 MTP";
compatible = "qcom,msm8916-mtp", "qcom,msm8916-mtp-smb1360",
"qcom,msm8916", "qcom,mtp";
};
/*
* Copyright (c) 2014-2015, The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
* only version 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include "msm8916.dtsi"
/ {
aliases {
serial0 = &blsp1_uart2;
};
chosen {
stdout-path = "serial0";
};
soc {
serial@78b0000 {
status = "okay";
pinctrl-names = "default", "sleep";
pinctrl-0 = <&blsp1_uart2_default>;
pinctrl-1 = <&blsp1_uart2_sleep>;
};
};
};
/*
* Copyright (c) 2013-2015, The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
* only version 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/qcom,gcc-msm8916.h>
#include <dt-bindings/reset/qcom,gcc-msm8916.h>
/ {
model = "Qualcomm Technologies, Inc. MSM8916";
compatible = "qcom,msm8916";
interrupt-parent = <&intc>;
#address-cells = <2>;
#size-cells = <2>;
aliases { };
chosen { };
memory {
device_type = "memory";
/* We expect the bootloader to fill in the reg */
reg = <0 0 0 0>;
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
CPU0: cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a53", "arm,armv8";
reg = <0x0>;
};
CPU1: cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a53", "arm,armv8";
reg = <0x1>;
};
CPU2: cpu@2 {
device_type = "cpu";
compatible = "arm,cortex-a53", "arm,armv8";
reg = <0x2>;
};
CPU3: cpu@3 {
device_type = "cpu";
compatible = "arm,cortex-a53", "arm,armv8";
reg = <0x3>;
};
};
timer {
compatible = "arm,armv8-timer";
interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
};
soc: soc {
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0 0 0xffffffff>;
compatible = "simple-bus";
pinctrl@1000000 {
compatible = "qcom,msm8916-pinctrl";
reg = <0x1000000 0x300000>;
interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
blsp1_uart2_default: blsp1_uart2_default {
pinmux {
function = "blsp_uart2";
pins = "gpio4", "gpio5";
};
pinconf {
pins = "gpio4", "gpio5";
drive-strength = <16>;
bias-disable;
};
};
blsp1_uart2_sleep: blsp1_uart2_sleep {
pinmux {
function = "blsp_uart2";
pins = "gpio4", "gpio5";
};
pinconf {
pins = "gpio4", "gpio5";
drive-strength = <2>;
bias-pull-down;
};
};
};
gcc: qcom,gcc@1800000 {
compatible = "qcom,gcc-msm8916";
#clock-cells = <1>;
#reset-cells = <1>;
reg = <0x1800000 0x80000>;
};
blsp1_uart2: serial@78b0000 {
compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
reg = <0x78b0000 0x200>;
interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "core", "iface";
status = "disabled";
};
intc: interrupt-controller@b000000 {
compatible = "qcom,msm-qgic2";
interrupt-controller;
#interrupt-cells = <3>;
reg = <0x0b000000 0x1000>, <0x0b002000 0x1000>;
};
timer@b020000 {
#address-cells = <1>;
#size-cells = <1>;
ranges;
compatible = "arm,armv7-timer-mem";
reg = <0xb020000 0x1000>;
clock-frequency = <19200000>;
frame@b021000 {
frame-number = <0>;
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
reg = <0xb021000 0x1000>,
<0xb022000 0x1000>;
};
frame@b023000 {
frame-number = <1>;
interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
reg = <0xb023000 0x1000>;
status = "disabled";
};
frame@b024000 {
frame-number = <2>;
interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
reg = <0xb024000 0x1000>;
status = "disabled";
};
frame@b025000 {
frame-number = <3>;
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
reg = <0xb025000 0x1000>;
status = "disabled";
};
frame@b026000 {
frame-number = <4>;
interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
reg = <0xb026000 0x1000>;
status = "disabled";
};
frame@b027000 {
frame-number = <5>;
interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
reg = <0xb027000 0x1000>;
status = "disabled";
};
frame@b028000 {
frame-number = <6>;
interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
reg = <0xb028000 0x1000>;
status = "disabled";
};
};
};
};
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment