Merge branch 'qed-selftests'

Sudarsana Reddy Kalluru says:

====================
qed/qede: ethtool selftests support.

This series adds the driver support for following selftests:
1. Register test
2. Memory test
3. Clock test
4. Interrupt test
5. Internal loopback test
Patch (1) adds the qed driver infrastructure for selftests. Patches (2) and
(3) add qede driver support for ethtool selftests.

Please consider applying this series to "net-next".
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/qlogic/qed/Makefile

 obj-$(CONFIG_QED) := qed.o
 
 qed-y := qed_cxt.o qed_dev.o qed_hw.o qed_init_fw_funcs.o qed_init_ops.o \
-	 qed_int.o qed_main.o qed_mcp.o qed_sp_commands.o qed_spq.o qed_l2.o
+	 qed_int.o qed_main.o qed_mcp.o qed_sp_commands.o qed_spq.o qed_l2.o \
+	 qed_selftest.o

drivers/net/ethernet/qlogic/qed/qed_hsi.h

@@ -3857,6 +3857,7 @@ struct public_drv_mb {
 #define DRV_MSG_CODE_PHY_CORE_WRITE             0x000e0000
 #define DRV_MSG_CODE_SET_VERSION                0x000f0000
 
+#define DRV_MSG_CODE_BIST_TEST                  0x001e0000
 #define DRV_MSG_CODE_SET_LED_MODE               0x00200000
 
 #define DRV_MSG_SEQ_NUMBER_MASK                 0x0000ffff
@@ -3914,6 +3915,18 @@ struct public_drv_mb {
 #define DRV_MB_PARAM_SET_LED_MODE_ON            0x1
 #define DRV_MB_PARAM_SET_LED_MODE_OFF           0x2
 
+#define DRV_MB_PARAM_BIST_UNKNOWN_TEST          0
+#define DRV_MB_PARAM_BIST_REGISTER_TEST         1
+#define DRV_MB_PARAM_BIST_CLOCK_TEST            2
+
+#define DRV_MB_PARAM_BIST_RC_UNKNOWN            0
+#define DRV_MB_PARAM_BIST_RC_PASSED             1
+#define DRV_MB_PARAM_BIST_RC_FAILED             2
+#define DRV_MB_PARAM_BIST_RC_INVALID_PARAMETER          3
+
+#define DRV_MB_PARAM_BIST_TEST_INDEX_SHIFT      0
+#define DRV_MB_PARAM_BIST_TEST_INDEX_MASK       0x000000FF
+
 	u32 fw_mb_header;
 #define FW_MSG_CODE_MASK                        0xffff0000
 #define FW_MSG_CODE_DRV_LOAD_ENGINE             0x10100000

drivers/net/ethernet/qlogic/qed/qed_main.c

@@ -28,6 +28,7 @@
 #include "qed_dev_api.h"
 #include "qed_mcp.h"
 #include "qed_hw.h"
+#include "qed_selftest.h"
 
 static char version[] =
 	"QLogic FastLinQ 4xxxx Core Module qed " DRV_MODULE_VERSION "\n";
@@ -976,6 +977,25 @@ static int qed_set_link(struct qed_dev *cdev,
 		else
 			link_params->pause.forced_tx = false;
 	}
+	if (params->override_flags & QED_LINK_OVERRIDE_LOOPBACK_MODE) {
+		switch (params->loopback_mode) {
+		case QED_LINK_LOOPBACK_INT_PHY:
+			link_params->loopback_mode = PMM_LOOPBACK_INT_PHY;
+			break;
+		case QED_LINK_LOOPBACK_EXT_PHY:
+			link_params->loopback_mode = PMM_LOOPBACK_EXT_PHY;
+			break;
+		case QED_LINK_LOOPBACK_EXT:
+			link_params->loopback_mode = PMM_LOOPBACK_EXT;
+			break;
+		case QED_LINK_LOOPBACK_MAC:
+			link_params->loopback_mode = PMM_LOOPBACK_MAC;
+			break;
+		default:
+			link_params->loopback_mode = PMM_LOOPBACK_NONE;
+			break;
+		}
+	}
 
 	rc = qed_mcp_set_link(hwfn, ptt, params->link_up);
 
@@ -1182,7 +1202,15 @@ static int qed_set_led(struct qed_dev *cdev, enum qed_led_mode mode)
 	return status;
 }
 
+struct qed_selftest_ops qed_selftest_ops_pass = {
+	.selftest_memory = &qed_selftest_memory,
+	.selftest_interrupt = &qed_selftest_interrupt,
+	.selftest_register = &qed_selftest_register,
+	.selftest_clock = &qed_selftest_clock,
+};
+
 const struct qed_common_ops qed_common_ops_pass = {
+	.selftest = &qed_selftest_ops_pass,
 	.probe = &qed_probe,
 	.remove = &qed_remove,
 	.set_power_state = &qed_set_power_state,

drivers/net/ethernet/qlogic/qed/qed_mcp.c

@@ -1017,3 +1017,45 @@ int qed_mcp_set_led(struct qed_hwfn *p_hwfn, struct qed_ptt *p_ptt,
 
 	return rc;
 }
+
+int qed_mcp_bist_register_test(struct qed_hwfn *p_hwfn, struct qed_ptt *p_ptt)
+{
+	u32 drv_mb_param = 0, rsp, param;
+	int rc = 0;
+
+	drv_mb_param = (DRV_MB_PARAM_BIST_REGISTER_TEST <<
+			DRV_MB_PARAM_BIST_TEST_INDEX_SHIFT);
+
+	rc = qed_mcp_cmd(p_hwfn, p_ptt, DRV_MSG_CODE_BIST_TEST,
+			 drv_mb_param, &rsp, &param);
+
+	if (rc)
+		return rc;
+
+	if (((rsp & FW_MSG_CODE_MASK) != FW_MSG_CODE_OK) ||
+	    (param != DRV_MB_PARAM_BIST_RC_PASSED))
+		rc = -EAGAIN;
+
+	return rc;
+}
+
+int qed_mcp_bist_clock_test(struct qed_hwfn *p_hwfn, struct qed_ptt *p_ptt)
+{
+	u32 drv_mb_param, rsp, param;
+	int rc = 0;
+
+	drv_mb_param = (DRV_MB_PARAM_BIST_CLOCK_TEST <<
+			DRV_MB_PARAM_BIST_TEST_INDEX_SHIFT);
+
+	rc = qed_mcp_cmd(p_hwfn, p_ptt, DRV_MSG_CODE_BIST_TEST,
+			 drv_mb_param, &rsp, &param);
+
+	if (rc)
+		return rc;
+
+	if (((rsp & FW_MSG_CODE_MASK) != FW_MSG_CODE_OK) ||
+	    (param != DRV_MB_PARAM_BIST_RC_PASSED))
+		rc = -EAGAIN;
+
+	return rc;
+}

drivers/net/ethernet/qlogic/qed/qed_mcp.h

@@ -245,6 +245,28 @@ int qed_mcp_set_led(struct qed_hwfn *p_hwfn,
 		    struct qed_ptt *p_ptt,
 		    enum qed_led_mode mode);
 
+/**
+ * @brief Bist register test
+ *
+ *  @param p_hwfn    - hw function
+ *  @param p_ptt     - PTT required for register access
+ *
+ * @return int - 0 - operation was successful.
+ */
+int qed_mcp_bist_register_test(struct qed_hwfn *p_hwfn,
+			       struct qed_ptt *p_ptt);
+
+/**
+ * @brief Bist clock test
+ *
+ *  @param p_hwfn    - hw function
+ *  @param p_ptt     - PTT required for register access
+ *
+ * @return int - 0 - operation was successful.
+ */
+int qed_mcp_bist_clock_test(struct qed_hwfn *p_hwfn,
+			    struct qed_ptt *p_ptt);
+
 /* Using hwfn number (and not pf_num) is required since in CMT mode,
  * same pf_num may be used by two different hwfn
  * TODO - this shouldn't really be in .h file, but until all fields

drivers/net/ethernet/qlogic/qed/qed_selftest.c

+#include "qed.h"
+#include "qed_dev_api.h"
+#include "qed_mcp.h"
+#include "qed_sp.h"
+
+int qed_selftest_memory(struct qed_dev *cdev)
+{
+	int rc = 0, i;
+
+	for_each_hwfn(cdev, i) {
+		rc = qed_sp_heartbeat_ramrod(&cdev->hwfns[i]);
+		if (rc)
+			return rc;
+	}
+
+	return rc;
+}
+
+int qed_selftest_interrupt(struct qed_dev *cdev)
+{
+	int rc = 0, i;
+
+	for_each_hwfn(cdev, i) {
+		rc = qed_sp_heartbeat_ramrod(&cdev->hwfns[i]);
+		if (rc)
+			return rc;
+	}
+
+	return rc;
+}
+
+int qed_selftest_register(struct qed_dev *cdev)
+{
+	struct qed_hwfn *p_hwfn;
+	struct qed_ptt *p_ptt;
+	int rc = 0, i;
+
+	/* although performed by MCP, this test is per engine */
+	for_each_hwfn(cdev, i) {
+		p_hwfn = &cdev->hwfns[i];
+		p_ptt = qed_ptt_acquire(p_hwfn);
+		if (!p_ptt) {
+			DP_ERR(p_hwfn, "failed to acquire ptt\n");
+			return -EBUSY;
+		}
+		rc = qed_mcp_bist_register_test(p_hwfn, p_ptt);
+		qed_ptt_release(p_hwfn, p_ptt);
+		if (rc)
+			break;
+	}
+
+	return rc;
+}
+
+int qed_selftest_clock(struct qed_dev *cdev)
+{
+	struct qed_hwfn *p_hwfn;
+	struct qed_ptt *p_ptt;
+	int rc = 0, i;
+
+	/* although performed by MCP, this test is per engine */
+	for_each_hwfn(cdev, i) {
+		p_hwfn = &cdev->hwfns[i];
+		p_ptt = qed_ptt_acquire(p_hwfn);
+		if (!p_ptt) {
+			DP_ERR(p_hwfn, "failed to acquire ptt\n");
+			return -EBUSY;
+		}
+		rc = qed_mcp_bist_clock_test(p_hwfn, p_ptt);
+		qed_ptt_release(p_hwfn, p_ptt);
+		if (rc)
+			break;
+	}
+
+	return rc;
+}

drivers/net/ethernet/qlogic/qed/qed_selftest.h

+#ifndef _QED_SELFTEST_API_H
+#define _QED_SELFTEST_API_H
+#include <linux/types.h>
+
+/**
+ * @brief qed_selftest_memory - Perform memory test
+ *
+ * @param cdev
+ *
+ * @return int
+ */
+int qed_selftest_memory(struct qed_dev *cdev);
+
+/**
+ * @brief qed_selftest_interrupt - Perform interrupt test
+ *
+ * @param cdev
+ *
+ * @return int
+ */
+int qed_selftest_interrupt(struct qed_dev *cdev);
+
+/**
+ * @brief qed_selftest_register - Perform register test
+ *
+ * @param cdev
+ *
+ * @return int
+ */
+int qed_selftest_register(struct qed_dev *cdev);
+
+/**
+ * @brief qed_selftest_clock - Perform clock test
+ *
+ * @param cdev
+ *
+ * @return int
+ */
+int qed_selftest_clock(struct qed_dev *cdev);
+#endif

drivers/net/ethernet/qlogic/qed/qed_sp.h

@@ -369,4 +369,14 @@ int qed_sp_pf_update_tunn_cfg(struct qed_hwfn *p_hwfn,
 			      struct qed_tunn_update_params *p_tunn,
 			      enum spq_mode comp_mode,
 			      struct qed_spq_comp_cb *p_comp_data);
+/**
+ * @brief qed_sp_heartbeat_ramrod - Send empty Ramrod
+ *
+ * @param p_hwfn
+ *
+ * @return int
+ */
+
+int qed_sp_heartbeat_ramrod(struct qed_hwfn *p_hwfn);
+
 #endif

drivers/net/ethernet/qlogic/qed/qed_sp_commands.c

@@ -428,3 +428,24 @@ int qed_sp_pf_stop(struct qed_hwfn *p_hwfn)
 
 	return qed_spq_post(p_hwfn, p_ent, NULL);
 }
+
+int qed_sp_heartbeat_ramrod(struct qed_hwfn *p_hwfn)
+{
+	struct qed_spq_entry *p_ent = NULL;
+	struct qed_sp_init_data init_data;
+	int rc;
+
+	/* Get SPQ entry */
+	memset(&init_data, 0, sizeof(init_data));
+	init_data.cid = qed_spq_get_cid(p_hwfn);
+	init_data.opaque_fid = p_hwfn->hw_info.opaque_fid;
+	init_data.comp_mode = QED_SPQ_MODE_EBLOCK;
+
+	rc = qed_sp_init_request(p_hwfn, &p_ent,
+				 COMMON_RAMROD_EMPTY, PROTOCOLID_COMMON,
+				 &init_data);
+	if (rc)
+		return rc;
+
+	return qed_spq_post(p_hwfn, p_ent, NULL);
+}

drivers/net/ethernet/qlogic/qede/qede.h

@@ -308,6 +308,10 @@ void qede_reload(struct qede_dev *edev,
 		 union qede_reload_args *args);
 int qede_change_mtu(struct net_device *dev, int new_mtu);
 void qede_fill_by_demand_stats(struct qede_dev *edev);
+bool qede_has_rx_work(struct qede_rx_queue *rxq);
+int qede_txq_has_work(struct qede_tx_queue *txq);
+void qede_recycle_rx_bd_ring(struct qede_rx_queue *rxq, struct qede_dev *edev,
+			     u8 count);
 
 #define RX_RING_SIZE_POW	13
 #define RX_RING_SIZE		((u16)BIT(RX_RING_SIZE_POW))

drivers/net/ethernet/qlogic/qede/qede_ethtool.c

@@ -9,6 +9,7 @@
 #include <linux/version.h>
 #include <linux/types.h>
 #include <linux/netdevice.h>
+#include <linux/etherdevice.h>
 #include <linux/ethtool.h>
 #include <linux/string.h>
 #include <linux/pci.h>
@@ -27,6 +28,9 @@
 #define QEDE_RQSTAT_STRING(stat_name) (#stat_name)
 #define QEDE_RQSTAT(stat_name) \
 	 {QEDE_RQSTAT_OFFSET(stat_name), QEDE_RQSTAT_STRING(stat_name)}
+
+#define QEDE_SELFTEST_POLL_COUNT 100
+
 static const struct {
 	u64 offset;
 	char string[ETH_GSTRING_LEN];
@@ -125,6 +129,23 @@ static const char qede_private_arr[QEDE_PRI_FLAG_LEN][ETH_GSTRING_LEN] = {
 	"Coupled-Function",
 };
 
+enum qede_ethtool_tests {
+	QEDE_ETHTOOL_INT_LOOPBACK,
+	QEDE_ETHTOOL_INTERRUPT_TEST,
+	QEDE_ETHTOOL_MEMORY_TEST,
+	QEDE_ETHTOOL_REGISTER_TEST,
+	QEDE_ETHTOOL_CLOCK_TEST,
+	QEDE_ETHTOOL_TEST_MAX
+};
+
+static const char qede_tests_str_arr[QEDE_ETHTOOL_TEST_MAX][ETH_GSTRING_LEN] = {
+	"Internal loopback (offline)",
+	"Interrupt (online)\t",
+	"Memory (online)\t\t",
+	"Register (online)\t",
+	"Clock (online)\t\t",
+};
+
 static void qede_get_strings_stats(struct qede_dev *edev, u8 *buf)
 {
 	int i, j, k;
@@ -152,6 +173,10 @@ static void qede_get_strings(struct net_device *dev, u32 stringset, u8 *buf)
 		memcpy(buf, qede_private_arr,
 		       ETH_GSTRING_LEN * QEDE_PRI_FLAG_LEN);
 		break;
+	case ETH_SS_TEST:
+		memcpy(buf, qede_tests_str_arr,
+		       ETH_GSTRING_LEN * QEDE_ETHTOOL_TEST_MAX);
+		break;
 	default:
 		DP_VERBOSE(edev, QED_MSG_DEBUG,
 			   "Unsupported stringset 0x%08x\n", stringset);
@@ -192,7 +217,8 @@ static int qede_get_sset_count(struct net_device *dev, int stringset)
 		return num_stats + QEDE_NUM_RQSTATS;
 	case ETH_SS_PRIV_FLAGS:
 		return QEDE_PRI_FLAG_LEN;
-
+	case ETH_SS_TEST:
+		return QEDE_ETHTOOL_TEST_MAX;
 	default:
 		DP_VERBOSE(edev, QED_MSG_DEBUG,
 			   "Unsupported stringset 0x%08x\n", stringset);
@@ -827,6 +853,267 @@ static int qede_set_rxfh(struct net_device *dev, const u32 *indir,
 	return 0;
 }
 
+/* This function enables the interrupt generation and the NAPI on the device */
+static void qede_netif_start(struct qede_dev *edev)
+{
+	int i;
+
+	if (!netif_running(edev->ndev))
+		return;
+
+	for_each_rss(i) {
+		/* Update and reenable interrupts */
+		qed_sb_ack(edev->fp_array[i].sb_info, IGU_INT_ENABLE, 1);
+		napi_enable(&edev->fp_array[i].napi);
+	}
+}
+
+/* This function disables the NAPI and the interrupt generation on the device */
+static void qede_netif_stop(struct qede_dev *edev)
+{
+	int i;
+
+	for_each_rss(i) {
+		napi_disable(&edev->fp_array[i].napi);
+		/* Disable interrupts */
+		qed_sb_ack(edev->fp_array[i].sb_info, IGU_INT_DISABLE, 0);
+	}
+}
+
+static int qede_selftest_transmit_traffic(struct qede_dev *edev,
+					  struct sk_buff *skb)
+{
+	struct qede_tx_queue *txq = &edev->fp_array[0].txqs[0];
+	struct eth_tx_1st_bd *first_bd;
+	dma_addr_t mapping;
+	int i, idx, val;
+
+	/* Fill the entry in the SW ring and the BDs in the FW ring */
+	idx = txq->sw_tx_prod & NUM_TX_BDS_MAX;
+	txq->sw_tx_ring[idx].skb = skb;
+	first_bd = qed_chain_produce(&txq->tx_pbl);
+	memset(first_bd, 0, sizeof(*first_bd));
+	val = 1 << ETH_TX_1ST_BD_FLAGS_START_BD_SHIFT;
+	first_bd->data.bd_flags.bitfields = val;
+
+	/* Map skb linear data for DMA and set in the first BD */
+	mapping = dma_map_single(&edev->pdev->dev, skb->data,
+				 skb_headlen(skb), DMA_TO_DEVICE);
+	if (unlikely(dma_mapping_error(&edev->pdev->dev, mapping))) {
+		DP_NOTICE(edev, "SKB mapping failed\n");
+		return -ENOMEM;
+	}
+	BD_SET_UNMAP_ADDR_LEN(first_bd, mapping, skb_headlen(skb));
+
+	/* update the first BD with the actual num BDs */
+	first_bd->data.nbds = 1;
+	txq->sw_tx_prod++;
+	/* 'next page' entries are counted in the producer value */
+	val = cpu_to_le16(qed_chain_get_prod_idx(&txq->tx_pbl));
+	txq->tx_db.data.bd_prod = val;
+
+	/* wmb makes sure that the BDs data is updated before updating the
+	 * producer, otherwise FW may read old data from the BDs.
+	 */
+	wmb();
+	barrier();
+	writel(txq->tx_db.raw, txq->doorbell_addr);
+
+	/* mmiowb is needed to synchronize doorbell writes from more than one
+	 * processor. It guarantees that the write arrives to the device before
+	 * the queue lock is released and another start_xmit is called (possibly
+	 * on another CPU). Without this barrier, the next doorbell can bypass
+	 * this doorbell. This is applicable to IA64/Altix systems.
+	 */
+	mmiowb();
+
+	for (i = 0; i < QEDE_SELFTEST_POLL_COUNT; i++) {
+		if (qede_txq_has_work(txq))
+			break;
+		usleep_range(100, 200);
+	}
+
+	if (!qede_txq_has_work(txq)) {
+		DP_NOTICE(edev, "Tx completion didn't happen\n");
+		return -1;
+	}
+
+	first_bd = (struct eth_tx_1st_bd *)qed_chain_consume(&txq->tx_pbl);
+	dma_unmap_page(&edev->pdev->dev, BD_UNMAP_ADDR(first_bd),
+		       BD_UNMAP_LEN(first_bd), DMA_TO_DEVICE);
+	txq->sw_tx_cons++;
+	txq->sw_tx_ring[idx].skb = NULL;
+
+	return 0;
+}
+
+static int qede_selftest_receive_traffic(struct qede_dev *edev)
+{
+	struct qede_rx_queue *rxq = edev->fp_array[0].rxq;
+	u16 hw_comp_cons, sw_comp_cons, sw_rx_index, len;
+	struct eth_fast_path_rx_reg_cqe *fp_cqe;
+	struct sw_rx_data *sw_rx_data;
+	union eth_rx_cqe *cqe;
+	u8 *data_ptr;
+	int i;
+
+	/* The packet is expected to receive on rx-queue 0 even though RSS is
+	 * enabled. This is because the queue 0 is configured as the default
+	 * queue and that the loopback traffic is not IP.
+	 */
+	for (i = 0; i < QEDE_SELFTEST_POLL_COUNT; i++) {
+		if (qede_has_rx_work(rxq))
+			break;
+		usleep_range(100, 200);
+	}
+
+	if (!qede_has_rx_work(rxq)) {
+		DP_NOTICE(edev, "Failed to receive the traffic\n");
+		return -1;
+	}
+
+	hw_comp_cons = le16_to_cpu(*rxq->hw_cons_ptr);
+	sw_comp_cons = qed_chain_get_cons_idx(&rxq->rx_comp_ring);
+
+	/* Memory barrier to prevent the CPU from doing speculative reads of CQE
+	 * / BD before reading hw_comp_cons. If the CQE is read before it is
+	 * written by FW, then FW writes CQE and SB, and then the CPU reads the
+	 * hw_comp_cons, it will use an old CQE.
+	 */
+	rmb();
+
+	/* Get the CQE from the completion ring */
+	cqe = (union eth_rx_cqe *)qed_chain_consume(&rxq->rx_comp_ring);
+
+	/* Get the data from the SW ring */
+	sw_rx_index = rxq->sw_rx_cons & NUM_RX_BDS_MAX;
+	sw_rx_data = &rxq->sw_rx_ring[sw_rx_index];
+	fp_cqe = &cqe->fast_path_regular;
+	len =  le16_to_cpu(fp_cqe->len_on_first_bd);
+	data_ptr = (u8 *)(page_address(sw_rx_data->data) +
+		     fp_cqe->placement_offset + sw_rx_data->page_offset);
+	for (i = ETH_HLEN; i < len; i++)
+		if (data_ptr[i] != (unsigned char)(i & 0xff)) {
+			DP_NOTICE(edev, "Loopback test failed\n");
+			qede_recycle_rx_bd_ring(rxq, edev, 1);
+			return -1;
+		}
+
+	qede_recycle_rx_bd_ring(rxq, edev, 1);
+
+	return 0;
+}
+
+static int qede_selftest_run_loopback(struct qede_dev *edev, u32 loopback_mode)
+{
+	struct qed_link_params link_params;
+	struct sk_buff *skb = NULL;
+	int rc = 0, i;
+	u32 pkt_size;
+	u8 *packet;
+
+	if (!netif_running(edev->ndev)) {
+		DP_NOTICE(edev, "Interface is down\n");
+		return -EINVAL;
+	}
+
+	qede_netif_stop(edev);
+
+	/* Bring up the link in Loopback mode */
+	memset(&link_params, 0, sizeof(link_params));
+	link_params.link_up = true;
+	link_params.override_flags = QED_LINK_OVERRIDE_LOOPBACK_MODE;
+	link_params.loopback_mode = loopback_mode;
+	edev->ops->common->set_link(edev->cdev, &link_params);
+
+	/* Wait for loopback configuration to apply */
+	msleep_interruptible(500);
+
+	/* prepare the loopback packet */
+	pkt_size = edev->ndev->mtu + ETH_HLEN;
+
+	skb = netdev_alloc_skb(edev->ndev, pkt_size);
+	if (!skb) {
+		DP_INFO(edev, "Can't allocate skb\n");
+		rc = -ENOMEM;
+		goto test_loopback_exit;
+	}
+	packet = skb_put(skb, pkt_size);
+	ether_addr_copy(packet, edev->ndev->dev_addr);
+	ether_addr_copy(packet + ETH_ALEN, edev->ndev->dev_addr);
+	memset(packet + (2 * ETH_ALEN), 0x77, (ETH_HLEN - (2 * ETH_ALEN)));
+	for (i = ETH_HLEN; i < pkt_size; i++)
+		packet[i] = (unsigned char)(i & 0xff);
+
+	rc = qede_selftest_transmit_traffic(edev, skb);
+	if (rc)
+		goto test_loopback_exit;
+
+	rc = qede_selftest_receive_traffic(edev);
+	if (rc)
+		goto test_loopback_exit;
+
+	DP_VERBOSE(edev, NETIF_MSG_RX_STATUS, "Loopback test successful\n");
+
+test_loopback_exit:
+	dev_kfree_skb(skb);
+
+	/* Bring up the link in Normal mode */
+	memset(&link_params, 0, sizeof(link_params));
+	link_params.link_up = true;
+	link_params.override_flags = QED_LINK_OVERRIDE_LOOPBACK_MODE;
+	link_params.loopback_mode = QED_LINK_LOOPBACK_NONE;
+	edev->ops->common->set_link(edev->cdev, &link_params);
+
+	/* Wait for loopback configuration to apply */
+	msleep_interruptible(500);
+
+	qede_netif_start(edev);
+
+	return rc;
+}
+
+static void qede_self_test(struct net_device *dev,
+			   struct ethtool_test *etest, u64 *buf)
+{
+	struct qede_dev *edev = netdev_priv(dev);
+
+	DP_VERBOSE(edev, QED_MSG_DEBUG,
+		   "Self-test command parameters: offline = %d, external_lb = %d\n",
+		   (etest->flags & ETH_TEST_FL_OFFLINE),
+		   (etest->flags & ETH_TEST_FL_EXTERNAL_LB) >> 2);
+
+	memset(buf, 0, sizeof(u64) * QEDE_ETHTOOL_TEST_MAX);
+
+	if (etest->flags & ETH_TEST_FL_OFFLINE) {
+		if (qede_selftest_run_loopback(edev,
+					       QED_LINK_LOOPBACK_INT_PHY)) {
+			buf[QEDE_ETHTOOL_INT_LOOPBACK] = 1;
+			etest->flags |= ETH_TEST_FL_FAILED;
+		}
+	}
+
+	if (edev->ops->common->selftest->selftest_interrupt(edev->cdev)) {
+		buf[QEDE_ETHTOOL_INTERRUPT_TEST] = 1;
+		etest->flags |= ETH_TEST_FL_FAILED;
+	}
+
+	if (edev->ops->common->selftest->selftest_memory(edev->cdev)) {
+		buf[QEDE_ETHTOOL_MEMORY_TEST] = 1;
+		etest->flags |= ETH_TEST_FL_FAILED;
+	}
+
+	if (edev->ops->common->selftest->selftest_register(edev->cdev)) {
+		buf[QEDE_ETHTOOL_REGISTER_TEST] = 1;
+		etest->flags |= ETH_TEST_FL_FAILED;
+	}
+
+	if (edev->ops->common->selftest->selftest_clock(edev->cdev)) {
+		buf[QEDE_ETHTOOL_CLOCK_TEST] = 1;
+		etest->flags |= ETH_TEST_FL_FAILED;
+	}
+}
+
 static const struct ethtool_ops qede_ethtool_ops = {
 	.get_settings = qede_get_settings,
 	.set_settings = qede_set_settings,
@@ -852,6 +1139,7 @@ static const struct ethtool_ops qede_ethtool_ops = {
 	.set_rxfh = qede_set_rxfh,
 	.get_channels = qede_get_channels,
 	.set_channels = qede_set_channels,
+	.self_test = qede_self_test,
 };
 
 void qede_set_ethtool_ops(struct net_device *dev)

drivers/net/ethernet/qlogic/qede/qede_main.c

@@ -668,7 +668,7 @@ netdev_tx_t qede_start_xmit(struct sk_buff *skb,
 	return NETDEV_TX_OK;
 }
 
-static int qede_txq_has_work(struct qede_tx_queue *txq)
+int qede_txq_has_work(struct qede_tx_queue *txq)
 {
 	u16 hw_bd_cons;
 
@@ -751,7 +751,7 @@ static int qede_tx_int(struct qede_dev *edev,
 	return 0;
 }
 
-static bool qede_has_rx_work(struct qede_rx_queue *rxq)
+bool qede_has_rx_work(struct qede_rx_queue *rxq)
 {
 	u16 hw_comp_cons, sw_comp_cons;
 
@@ -806,8 +806,8 @@ static inline void qede_reuse_page(struct qede_dev *edev,
 /* In case of allocation failures reuse buffers
  * from consumer index to produce buffers for firmware
  */
-static void qede_recycle_rx_bd_ring(struct qede_rx_queue *rxq,
-				    struct qede_dev *edev, u8 count)
+void qede_recycle_rx_bd_ring(struct qede_rx_queue *rxq,
+			     struct qede_dev *edev, u8 count)
 {
 	struct sw_rx_data *curr_cons;
 

include/linux/qed/qed_if.h

@@ -110,6 +110,7 @@ struct qed_link_params {
 #define QED_LINK_OVERRIDE_SPEED_ADV_SPEEDS      BIT(1)
 #define QED_LINK_OVERRIDE_SPEED_FORCED_SPEED    BIT(2)
 #define QED_LINK_OVERRIDE_PAUSE_CONFIG          BIT(3)
+#define QED_LINK_OVERRIDE_LOOPBACK_MODE         BIT(4)
 	u32	override_flags;
 	bool	autoneg;
 	u32	adv_speeds;
@@ -118,6 +119,12 @@ struct qed_link_params {
 #define QED_LINK_PAUSE_RX_ENABLE                BIT(1)
 #define QED_LINK_PAUSE_TX_ENABLE                BIT(2)
 	u32	pause_config;
+#define QED_LINK_LOOPBACK_NONE                  BIT(0)
+#define QED_LINK_LOOPBACK_INT_PHY               BIT(1)
+#define QED_LINK_LOOPBACK_EXT_PHY               BIT(2)
+#define QED_LINK_LOOPBACK_EXT                   BIT(3)
+#define QED_LINK_LOOPBACK_MAC                   BIT(4)
+	u32	loopback_mode;
 };
 
 struct qed_link_output {
@@ -158,7 +165,47 @@ struct qed_common_cb_ops {
 			       struct qed_link_output	*link);
 };
 
+struct qed_selftest_ops {
+/**
+ * @brief selftest_interrupt - Perform interrupt test
+ *
+ * @param cdev
+ *
+ * @return 0 on success, error otherwise.
+ */
+	int (*selftest_interrupt)(struct qed_dev *cdev);
+
+/**
+ * @brief selftest_memory - Perform memory test
+ *
+ * @param cdev
+ *
+ * @return 0 on success, error otherwise.
+ */
+	int (*selftest_memory)(struct qed_dev *cdev);
+
+/**
+ * @brief selftest_register - Perform register test
+ *
+ * @param cdev
+ *
+ * @return 0 on success, error otherwise.
+ */
+	int (*selftest_register)(struct qed_dev *cdev);
+
+/**
+ * @brief selftest_clock - Perform clock test
+ *
+ * @param cdev
+ *
+ * @return 0 on success, error otherwise.
+ */
+	int (*selftest_clock)(struct qed_dev *cdev);
+};
+
 struct qed_common_ops {
+	struct qed_selftest_ops *selftest;
+
 	struct qed_dev*	(*probe)(struct pci_dev *dev,
 				 enum qed_protocol protocol,
 				 u32 dp_module, u8 dp_level);