Commit 584db6a1 authored by Samu Onkalo's avatar Samu Onkalo Committed by Herbert Xu

crypto: omap-sham - Adjust DMA parameters

DMA is set to use burst mode also for source channel. It should
descrease memory bandwidth needs.

DMA synchronization is set to use prefetch mechanism. SHAM block is behind
L4 bus and it doesn't have fifo. SHAM block is stalling as long as the new
data is available. It takes time to fetch data from memory and transfer it
via L4 bus. With prefetch enabled, data is waiting in DMA fifo and SHAM block
receives new data block faster.
This increases SHA processing speed up to 30 percent depending on the
bus / memory load.
Signed-off-by: default avatarSamu Onkalo <samu.p.onkalo@nokia.com>
Signed-off-by: default avatarDmitry Kasatkin <dmitry.kasatkin@nokia.com>
Signed-off-by: default avatarHerbert Xu <herbert@gondor.apana.org.au>
parent e84c5480
......@@ -311,7 +311,8 @@ static int omap_sham_xmit_dma(struct omap_sham_dev *dd, dma_addr_t dma_addr,
len32 = DIV_ROUND_UP(length, sizeof(u32));
omap_set_dma_transfer_params(dd->dma_lch, OMAP_DMA_DATA_TYPE_S32, len32,
1, OMAP_DMA_SYNC_PACKET, dd->dma, OMAP_DMA_DST_SYNC);
1, OMAP_DMA_SYNC_PACKET, dd->dma,
OMAP_DMA_DST_SYNC_PREFETCH);
omap_set_dma_src_params(dd->dma_lch, 0, OMAP_DMA_AMODE_POST_INC,
dma_addr, 0, 0);
......@@ -1072,6 +1073,9 @@ static int omap_sham_dma_init(struct omap_sham_dev *dd)
omap_set_dma_dest_burst_mode(dd->dma_lch,
OMAP_DMA_DATA_BURST_16);
omap_set_dma_src_burst_mode(dd->dma_lch,
OMAP_DMA_DATA_BURST_4);
return 0;
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment