Commit 585e881e authored by Srinivas Kandagatla's avatar Srinivas Kandagatla Committed by Mark Brown

ASoC: codecs: Add msm8916-wcd analog codec

msm8916-wcd codec is found in Qualcomm msm8916 and apq8016 processors.
This codec IP is split in to two parts (Digital & Analog).
Analog part is integrated in to PMIC PM8916 and the digital part is
integrated into Application processor. Data transfer between Analog and
Digital Die is done via a internal bus called PDM.

This patch adds support to Analog part of the Codec which is integrated
into PMIC PM8916.
Signed-off-by: default avatarSrinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: default avatarMark Brown <broonie@kernel.org>
parent 1001354c
msm8916 analog audio CODEC
Bindings for codec Analog IP which is integrated in pmic pm8916,
## Bindings for codec core on pmic:
Required properties
- compatible = "qcom,pm8916-wcd-analog-codec";
- reg: represents the slave base address provided to the peripheral.
- interrupt-parent : The parent interrupt controller.
- interrupts: List of interrupts in given SPMI peripheral.
- interrupt-names: Names specified to above list of interrupts in same
order. List of supported interrupt names are:
"cdc_spk_cnp_int" - Speaker click and pop interrupt.
"cdc_spk_clip_int" - Speaker clip interrupt.
"cdc_spk_ocp_int" - Speaker over current protect interrupt.
"mbhc_ins_rem_det1" - jack insert removal detect interrupt 1.
"mbhc_but_rel_det" - button release interrupt.
"mbhc_but_press_det" - button press event
"mbhc_ins_rem_det" - jack insert removal detect interrupt.
"mbhc_switch_int" - multi button headset interrupt.
"cdc_ear_ocp_int" - Earphone over current protect interrupt.
"cdc_hphr_ocp_int" - Headphone R over current protect interrupt.
"cdc_hphl_ocp_det" - Headphone L over current protect interrupt.
"cdc_ear_cnp_int" - earphone cnp interrupt.
"cdc_hphr_cnp_int" - hphr click and pop interrupt.
"cdc_hphl_cnp_int" - hphl click and pop interrupt.
- clocks: Handle to mclk.
- clock-names: should be "mclk"
- vdd-cdc-io-supply: phandle to VDD_CDC_IO regulator DT node.
- vdd-cdc-tx-rx-cx-supply: phandle to VDD_CDC_TX/RX/CX regulator DT node.
- vdd-micbias-supply: phandle of VDD_MICBIAS supply's regulator DT node.
Optional Properties:
- qcom,micbias1-ext-cap: boolean, present if micbias1 has external capacitor
connected.
- qcom,micbias2-ext-cap: boolean, present if micbias2 has external capacitor
connected.
Example:
spmi_bus {
...
audio-codec@f000{
compatible = "qcom,pm8916-wcd-analog-codec";
reg = <0xf000 0x200>;
reg-names = "pmic-codec-core";
clocks = <&gcc GCC_CODEC_DIGCODEC_CLK>;
clock-names = "mclk";
interrupt-parent = <&spmi_bus>;
interrupts = <0x1 0xf0 0x0 IRQ_TYPE_NONE>,
<0x1 0xf0 0x1 IRQ_TYPE_NONE>,
<0x1 0xf0 0x2 IRQ_TYPE_NONE>,
<0x1 0xf0 0x3 IRQ_TYPE_NONE>,
<0x1 0xf0 0x4 IRQ_TYPE_NONE>,
<0x1 0xf0 0x5 IRQ_TYPE_NONE>,
<0x1 0xf0 0x6 IRQ_TYPE_NONE>,
<0x1 0xf0 0x7 IRQ_TYPE_NONE>,
<0x1 0xf1 0x0 IRQ_TYPE_NONE>,
<0x1 0xf1 0x1 IRQ_TYPE_NONE>,
<0x1 0xf1 0x2 IRQ_TYPE_NONE>,
<0x1 0xf1 0x3 IRQ_TYPE_NONE>,
<0x1 0xf1 0x4 IRQ_TYPE_NONE>,
<0x1 0xf1 0x5 IRQ_TYPE_NONE>;
interrupt-names = "cdc_spk_cnp_int",
"cdc_spk_clip_int",
"cdc_spk_ocp_int",
"mbhc_ins_rem_det1",
"mbhc_but_rel_det",
"mbhc_but_press_det",
"mbhc_ins_rem_det",
"mbhc_switch_int",
"cdc_ear_ocp_int",
"cdc_hphr_ocp_int",
"cdc_hphl_ocp_det",
"cdc_ear_cnp_int",
"cdc_hphr_cnp_int",
"cdc_hphl_cnp_int";
VDD-CDC-IO-supply = <&pm8916_l5>;
VDD-CDC-TX-RX-CX-supply = <&pm8916_l5>;
VDD-MICBIAS-supply = <&pm8916_l13>;
#sound-dai-cells = <1>;
};
};
...@@ -581,6 +581,10 @@ config SND_SOC_MAX9860 ...@@ -581,6 +581,10 @@ config SND_SOC_MAX9860
depends on I2C depends on I2C
select REGMAP_I2C select REGMAP_I2C
config SND_SOC_MSM8916_WCD_ANALOG
tristate "Qualcomm MSM8916 WCD Analog Codec"
depends on SPMI || COMPILE_TEST
config SND_SOC_PCM1681 config SND_SOC_PCM1681
tristate "Texas Instruments PCM1681 CODEC" tristate "Texas Instruments PCM1681 CODEC"
depends on I2C depends on I2C
......
...@@ -86,6 +86,7 @@ snd-soc-max9850-objs := max9850.o ...@@ -86,6 +86,7 @@ snd-soc-max9850-objs := max9850.o
snd-soc-max9860-objs := max9860.o snd-soc-max9860-objs := max9860.o
snd-soc-mc13783-objs := mc13783.o snd-soc-mc13783-objs := mc13783.o
snd-soc-ml26124-objs := ml26124.o snd-soc-ml26124-objs := ml26124.o
snd-soc-msm8916-analog-objs := msm8916-wcd-analog.o
snd-soc-nau8810-objs := nau8810.o snd-soc-nau8810-objs := nau8810.o
snd-soc-nau8825-objs := nau8825.o snd-soc-nau8825-objs := nau8825.o
snd-soc-hdmi-codec-objs := hdmi-codec.o snd-soc-hdmi-codec-objs := hdmi-codec.o
...@@ -214,7 +215,6 @@ snd-soc-wm9705-objs := wm9705.o ...@@ -214,7 +215,6 @@ snd-soc-wm9705-objs := wm9705.o
snd-soc-wm9712-objs := wm9712.o snd-soc-wm9712-objs := wm9712.o
snd-soc-wm9713-objs := wm9713.o snd-soc-wm9713-objs := wm9713.o
snd-soc-wm-hubs-objs := wm_hubs.o snd-soc-wm-hubs-objs := wm_hubs.o
# Amp # Amp
snd-soc-max9877-objs := max9877.o snd-soc-max9877-objs := max9877.o
snd-soc-max98504-objs := max98504.o snd-soc-max98504-objs := max98504.o
...@@ -310,6 +310,7 @@ obj-$(CONFIG_SND_SOC_MAX9850) += snd-soc-max9850.o ...@@ -310,6 +310,7 @@ obj-$(CONFIG_SND_SOC_MAX9850) += snd-soc-max9850.o
obj-$(CONFIG_SND_SOC_MAX9860) += snd-soc-max9860.o obj-$(CONFIG_SND_SOC_MAX9860) += snd-soc-max9860.o
obj-$(CONFIG_SND_SOC_MC13783) += snd-soc-mc13783.o obj-$(CONFIG_SND_SOC_MC13783) += snd-soc-mc13783.o
obj-$(CONFIG_SND_SOC_ML26124) += snd-soc-ml26124.o obj-$(CONFIG_SND_SOC_ML26124) += snd-soc-ml26124.o
obj-$(CONFIG_SND_SOC_MSM8916_WCD_ANALOG) +=snd-soc-msm8916-analog.o
obj-$(CONFIG_SND_SOC_NAU8810) += snd-soc-nau8810.o obj-$(CONFIG_SND_SOC_NAU8810) += snd-soc-nau8810.o
obj-$(CONFIG_SND_SOC_NAU8825) += snd-soc-nau8825.o obj-$(CONFIG_SND_SOC_NAU8825) += snd-soc-nau8825.o
obj-$(CONFIG_SND_SOC_HDMI_CODEC) += snd-soc-hdmi-codec.o obj-$(CONFIG_SND_SOC_HDMI_CODEC) += snd-soc-hdmi-codec.o
......
This diff is collapsed.
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment