Commit 586187d7 authored by Kent Overstreet's avatar Kent Overstreet Committed by Linus Torvalds

Drop flex_arrays

All existing users have been converted to generic radix trees

Link: http://lkml.kernel.org/r/20181217131929.11727-8-kent.overstreet@gmail.comSigned-off-by: default avatarKent Overstreet <kent.overstreet@gmail.com>
Acked-by: default avatarDave Hansen <dave.hansen@intel.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Eric Paris <eparis@parisplace.org>
Cc: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Neil Horman <nhorman@tuxdriver.com>
Cc: Paul Moore <paul@paul-moore.com>
Cc: Pravin B Shelar <pshelar@ovn.org>
Cc: Shaohua Li <shli@kernel.org>
Cc: Stephen Smalley <sds@tycho.nsa.gov>
Cc: Vlad Yasevich <vyasevich@gmail.com>
Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
parent 2075e50c
===================================
Using flexible arrays in the kernel
===================================
Large contiguous memory allocations can be unreliable in the Linux kernel.
Kernel programmers will sometimes respond to this problem by allocating
pages with :c:func:`vmalloc()`. This solution not ideal, though. On 32-bit
systems, memory from vmalloc() must be mapped into a relatively small address
space; it's easy to run out. On SMP systems, the page table changes required
by vmalloc() allocations can require expensive cross-processor interrupts on
all CPUs. And, on all systems, use of space in the vmalloc() range increases
pressure on the translation lookaside buffer (TLB), reducing the performance
of the system.
In many cases, the need for memory from vmalloc() can be eliminated by piecing
together an array from smaller parts; the flexible array library exists to make
this task easier.
A flexible array holds an arbitrary (within limits) number of fixed-sized
objects, accessed via an integer index. Sparse arrays are handled
reasonably well. Only single-page allocations are made, so memory
allocation failures should be relatively rare. The down sides are that the
arrays cannot be indexed directly, individual object size cannot exceed the
system page size, and putting data into a flexible array requires a copy
operation. It's also worth noting that flexible arrays do no internal
locking at all; if concurrent access to an array is possible, then the
caller must arrange for appropriate mutual exclusion.
The creation of a flexible array is done with :c:func:`flex_array_alloc()`::
#include <linux/flex_array.h>
struct flex_array *flex_array_alloc(int element_size,
unsigned int total,
gfp_t flags);
The individual object size is provided by ``element_size``, while total is the
maximum number of objects which can be stored in the array. The flags
argument is passed directly to the internal memory allocation calls. With
the current code, using flags to ask for high memory is likely to lead to
notably unpleasant side effects.
It is also possible to define flexible arrays at compile time with::
DEFINE_FLEX_ARRAY(name, element_size, total);
This macro will result in a definition of an array with the given name; the
element size and total will be checked for validity at compile time.
Storing data into a flexible array is accomplished with a call to
:c:func:`flex_array_put()`::
int flex_array_put(struct flex_array *array, unsigned int element_nr,
void *src, gfp_t flags);
This call will copy the data from src into the array, in the position
indicated by ``element_nr`` (which must be less than the maximum specified when
the array was created). If any memory allocations must be performed, flags
will be used. The return value is zero on success, a negative error code
otherwise.
There might possibly be a need to store data into a flexible array while
running in some sort of atomic context; in this situation, sleeping in the
memory allocator would be a bad thing. That can be avoided by using
``GFP_ATOMIC`` for the flags value, but, often, there is a better way. The
trick is to ensure that any needed memory allocations are done before
entering atomic context, using :c:func:`flex_array_prealloc()`::
int flex_array_prealloc(struct flex_array *array, unsigned int start,
unsigned int nr_elements, gfp_t flags);
This function will ensure that memory for the elements indexed in the range
defined by ``start`` and ``nr_elements`` has been allocated. Thereafter, a
``flex_array_put()`` call on an element in that range is guaranteed not to
block.
Getting data back out of the array is done with :c:func:`flex_array_get()`::
void *flex_array_get(struct flex_array *fa, unsigned int element_nr);
The return value is a pointer to the data element, or NULL if that
particular element has never been allocated.
Note that it is possible to get back a valid pointer for an element which
has never been stored in the array. Memory for array elements is allocated
one page at a time; a single allocation could provide memory for several
adjacent elements. Flexible array elements are normally initialized to the
value ``FLEX_ARRAY_FREE`` (defined as 0x6c in <linux/poison.h>), so errors
involving that number probably result from use of unstored array entries.
Note that, if array elements are allocated with ``__GFP_ZERO``, they will be
initialized to zero and this poisoning will not happen.
Individual elements in the array can be cleared with
:c:func:`flex_array_clear()`::
int flex_array_clear(struct flex_array *array, unsigned int element_nr);
This function will set the given element to ``FLEX_ARRAY_FREE`` and return
zero. If storage for the indicated element is not allocated for the array,
``flex_array_clear()`` will return ``-EINVAL`` instead. Note that clearing an
element does not release the storage associated with it; to reduce the
allocated size of an array, call :c:func:`flex_array_shrink()`::
int flex_array_shrink(struct flex_array *array);
The return value will be the number of pages of memory actually freed.
This function works by scanning the array for pages containing nothing but
``FLEX_ARRAY_FREE`` bytes, so (1) it can be expensive, and (2) it will not work
if the array's pages are allocated with ``__GFP_ZERO``.
It is possible to remove all elements of an array with a call to
:c:func:`flex_array_free_parts()`::
void flex_array_free_parts(struct flex_array *array);
This call frees all elements, but leaves the array itself in place.
Freeing the entire array is done with :c:func:`flex_array_free()`::
void flex_array_free(struct flex_array *array);
As of this writing, there are no users of flexible arrays in the mainline
kernel. The functions described here are also not exported to modules;
that will probably be fixed when somebody comes up with a need for it.
Flexible array functions
------------------------
.. kernel-doc:: include/linux/flex_array.h
===================================
Using flexible arrays in the kernel
===================================
:Updated: Last updated for 2.6.32
:Author: Jonathan Corbet <corbet@lwn.net>
Large contiguous memory allocations can be unreliable in the Linux kernel.
Kernel programmers will sometimes respond to this problem by allocating
pages with vmalloc(). This solution not ideal, though. On 32-bit systems,
memory from vmalloc() must be mapped into a relatively small address space;
it's easy to run out. On SMP systems, the page table changes required by
vmalloc() allocations can require expensive cross-processor interrupts on
all CPUs. And, on all systems, use of space in the vmalloc() range
increases pressure on the translation lookaside buffer (TLB), reducing the
performance of the system.
In many cases, the need for memory from vmalloc() can be eliminated by
piecing together an array from smaller parts; the flexible array library
exists to make this task easier.
A flexible array holds an arbitrary (within limits) number of fixed-sized
objects, accessed via an integer index. Sparse arrays are handled
reasonably well. Only single-page allocations are made, so memory
allocation failures should be relatively rare. The down sides are that the
arrays cannot be indexed directly, individual object size cannot exceed the
system page size, and putting data into a flexible array requires a copy
operation. It's also worth noting that flexible arrays do no internal
locking at all; if concurrent access to an array is possible, then the
caller must arrange for appropriate mutual exclusion.
The creation of a flexible array is done with::
#include <linux/flex_array.h>
struct flex_array *flex_array_alloc(int element_size,
unsigned int total,
gfp_t flags);
The individual object size is provided by element_size, while total is the
maximum number of objects which can be stored in the array. The flags
argument is passed directly to the internal memory allocation calls. With
the current code, using flags to ask for high memory is likely to lead to
notably unpleasant side effects.
It is also possible to define flexible arrays at compile time with::
DEFINE_FLEX_ARRAY(name, element_size, total);
This macro will result in a definition of an array with the given name; the
element size and total will be checked for validity at compile time.
Storing data into a flexible array is accomplished with a call to::
int flex_array_put(struct flex_array *array, unsigned int element_nr,
void *src, gfp_t flags);
This call will copy the data from src into the array, in the position
indicated by element_nr (which must be less than the maximum specified when
the array was created). If any memory allocations must be performed, flags
will be used. The return value is zero on success, a negative error code
otherwise.
There might possibly be a need to store data into a flexible array while
running in some sort of atomic context; in this situation, sleeping in the
memory allocator would be a bad thing. That can be avoided by using
GFP_ATOMIC for the flags value, but, often, there is a better way. The
trick is to ensure that any needed memory allocations are done before
entering atomic context, using::
int flex_array_prealloc(struct flex_array *array, unsigned int start,
unsigned int nr_elements, gfp_t flags);
This function will ensure that memory for the elements indexed in the range
defined by start and nr_elements has been allocated. Thereafter, a
flex_array_put() call on an element in that range is guaranteed not to
block.
Getting data back out of the array is done with::
void *flex_array_get(struct flex_array *fa, unsigned int element_nr);
The return value is a pointer to the data element, or NULL if that
particular element has never been allocated.
Note that it is possible to get back a valid pointer for an element which
has never been stored in the array. Memory for array elements is allocated
one page at a time; a single allocation could provide memory for several
adjacent elements. Flexible array elements are normally initialized to the
value FLEX_ARRAY_FREE (defined as 0x6c in <linux/poison.h>), so errors
involving that number probably result from use of unstored array entries.
Note that, if array elements are allocated with __GFP_ZERO, they will be
initialized to zero and this poisoning will not happen.
Individual elements in the array can be cleared with::
int flex_array_clear(struct flex_array *array, unsigned int element_nr);
This function will set the given element to FLEX_ARRAY_FREE and return
zero. If storage for the indicated element is not allocated for the array,
flex_array_clear() will return -EINVAL instead. Note that clearing an
element does not release the storage associated with it; to reduce the
allocated size of an array, call::
int flex_array_shrink(struct flex_array *array);
The return value will be the number of pages of memory actually freed.
This function works by scanning the array for pages containing nothing but
FLEX_ARRAY_FREE bytes, so (1) it can be expensive, and (2) it will not work
if the array's pages are allocated with __GFP_ZERO.
It is possible to remove all elements of an array with a call to::
void flex_array_free_parts(struct flex_array *array);
This call frees all elements, but leaves the array itself in place.
Freeing the entire array is done with::
void flex_array_free(struct flex_array *array);
As of this writing, there are no users of flexible arrays in the mainline
kernel. The functions described here are also not exported to modules;
that will probably be fixed when somebody comes up with a need for it.
/* SPDX-License-Identifier: GPL-2.0 */
#ifndef _FLEX_ARRAY_H
#define _FLEX_ARRAY_H
#include <linux/types.h>
#include <linux/reciprocal_div.h>
#include <asm/page.h>
#define FLEX_ARRAY_PART_SIZE PAGE_SIZE
#define FLEX_ARRAY_BASE_SIZE PAGE_SIZE
struct flex_array_part;
/*
* This is meant to replace cases where an array-like
* structure has gotten too big to fit into kmalloc()
* and the developer is getting tempted to use
* vmalloc().
*/
struct flex_array {
union {
struct {
int element_size;
int total_nr_elements;
int elems_per_part;
struct reciprocal_value reciprocal_elems;
struct flex_array_part *parts[];
};
/*
* This little trick makes sure that
* sizeof(flex_array) == PAGE_SIZE
*/
char padding[FLEX_ARRAY_BASE_SIZE];
};
};
/* Number of bytes left in base struct flex_array, excluding metadata */
#define FLEX_ARRAY_BASE_BYTES_LEFT \
(FLEX_ARRAY_BASE_SIZE - offsetof(struct flex_array, parts))
/* Number of pointers in base to struct flex_array_part pages */
#define FLEX_ARRAY_NR_BASE_PTRS \
(FLEX_ARRAY_BASE_BYTES_LEFT / sizeof(struct flex_array_part *))
/* Number of elements of size that fit in struct flex_array_part */
#define FLEX_ARRAY_ELEMENTS_PER_PART(size) \
(FLEX_ARRAY_PART_SIZE / size)
/*
* Defines a statically allocated flex array and ensures its parameters are
* valid.
*/
#define DEFINE_FLEX_ARRAY(__arrayname, __element_size, __total) \
struct flex_array __arrayname = { { { \
.element_size = (__element_size), \
.total_nr_elements = (__total), \
} } }; \
static inline void __arrayname##_invalid_parameter(void) \
{ \
BUILD_BUG_ON((__total) > FLEX_ARRAY_NR_BASE_PTRS * \
FLEX_ARRAY_ELEMENTS_PER_PART(__element_size)); \
}
/**
* flex_array_alloc() - Creates a flexible array.
* @element_size: individual object size.
* @total: maximum number of objects which can be stored.
* @flags: GFP flags
*
* Return: Returns an object of structure flex_array.
*/
struct flex_array *flex_array_alloc(int element_size, unsigned int total,
gfp_t flags);
/**
* flex_array_prealloc() - Ensures that memory for the elements indexed in the
* range defined by start and nr_elements has been allocated.
* @fa: array to allocate memory to.
* @start: start address
* @nr_elements: number of elements to be allocated.
* @flags: GFP flags
*
*/
int flex_array_prealloc(struct flex_array *fa, unsigned int start,
unsigned int nr_elements, gfp_t flags);
/**
* flex_array_free() - Removes all elements of a flexible array.
* @fa: array to be freed.
*/
void flex_array_free(struct flex_array *fa);
/**
* flex_array_free_parts() - Removes all elements of a flexible array, but
* leaves the array itself in place.
* @fa: array to be emptied.
*/
void flex_array_free_parts(struct flex_array *fa);
/**
* flex_array_put() - Stores data into a flexible array.
* @fa: array where element is to be stored.
* @element_nr: position to copy, must be less than the maximum specified when
* the array was created.
* @src: data source to be copied into the array.
* @flags: GFP flags
*
* Return: Returns zero on success, a negative error code otherwise.
*/
int flex_array_put(struct flex_array *fa, unsigned int element_nr, void *src,
gfp_t flags);
/**
* flex_array_clear() - Clears an individual element in the array, sets the
* given element to FLEX_ARRAY_FREE.
* @element_nr: element position to clear.
* @fa: array to which element to be cleared belongs.
*
* Return: Returns zero on success, -EINVAL otherwise.
*/
int flex_array_clear(struct flex_array *fa, unsigned int element_nr);
/**
* flex_array_get() - Retrieves data into a flexible array.
*
* @element_nr: Element position to retrieve data from.
* @fa: array from which data is to be retrieved.
*
* Return: Returns a pointer to the data element, or NULL if that
* particular element has never been allocated.
*/
void *flex_array_get(struct flex_array *fa, unsigned int element_nr);
/**
* flex_array_shrink() - Reduces the allocated size of an array.
* @fa: array to shrink.
*
* Return: Returns number of pages of memory actually freed.
*
*/
int flex_array_shrink(struct flex_array *fa);
#define flex_array_put_ptr(fa, nr, src, gfp) \
flex_array_put(fa, nr, (void *)&(src), gfp)
void *flex_array_get_ptr(struct flex_array *fa, unsigned int element_nr);
#endif /* _FLEX_ARRAY_H */
...@@ -83,9 +83,6 @@ ...@@ -83,9 +83,6 @@
#define MUTEX_DEBUG_FREE 0x22 #define MUTEX_DEBUG_FREE 0x22
#define MUTEX_POISON_WW_CTX ((void *) 0x500 + POISON_POINTER_DELTA) #define MUTEX_POISON_WW_CTX ((void *) 0x500 + POISON_POINTER_DELTA)
/********** lib/flex_array.c **********/
#define FLEX_ARRAY_FREE 0x6c /* for use-after-free poisoning */
/********** security/ **********/ /********** security/ **********/
#define KEY_DESTROY 0xbd #define KEY_DESTROY 0xbd
......
...@@ -35,7 +35,7 @@ obj-y += lockref.o ...@@ -35,7 +35,7 @@ obj-y += lockref.o
obj-y += bcd.o div64.o sort.o parser.o debug_locks.o random32.o \ obj-y += bcd.o div64.o sort.o parser.o debug_locks.o random32.o \
bust_spinlocks.o kasprintf.o bitmap.o scatterlist.o \ bust_spinlocks.o kasprintf.o bitmap.o scatterlist.o \
gcd.o lcm.o list_sort.o uuid.o flex_array.o iov_iter.o clz_ctz.o \ gcd.o lcm.o list_sort.o uuid.o iov_iter.o clz_ctz.o \
bsearch.o find_bit.o llist.o memweight.o kfifo.o \ bsearch.o find_bit.o llist.o memweight.o kfifo.o \
percpu-refcount.o rhashtable.o reciprocal_div.o \ percpu-refcount.o rhashtable.o reciprocal_div.o \
once.o refcount.o usercopy.o errseq.o bucket_locks.o \ once.o refcount.o usercopy.o errseq.o bucket_locks.o \
......
/*
* Flexible array managed in PAGE_SIZE parts
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*
* Copyright IBM Corporation, 2009
*
* Author: Dave Hansen <dave@linux.vnet.ibm.com>
*/
#include <linux/flex_array.h>
#include <linux/slab.h>
#include <linux/stddef.h>
#include <linux/export.h>
#include <linux/reciprocal_div.h>
struct flex_array_part {
char elements[FLEX_ARRAY_PART_SIZE];
};
/*
* If a user requests an allocation which is small
* enough, we may simply use the space in the
* flex_array->parts[] array to store the user
* data.
*/
static inline int elements_fit_in_base(struct flex_array *fa)
{
int data_size = fa->element_size * fa->total_nr_elements;
if (data_size <= FLEX_ARRAY_BASE_BYTES_LEFT)
return 1;
return 0;
}
/**
* flex_array_alloc - allocate a new flexible array
* @element_size: the size of individual elements in the array
* @total: total number of elements that this should hold
* @flags: page allocation flags to use for base array
*
* Note: all locking must be provided by the caller.
*
* @total is used to size internal structures. If the user ever
* accesses any array indexes >=@total, it will produce errors.
*
* The maximum number of elements is defined as: the number of
* elements that can be stored in a page times the number of
* page pointers that we can fit in the base structure or (using
* integer math):
*
* (PAGE_SIZE/element_size) * (PAGE_SIZE-8)/sizeof(void *)
*
* Here's a table showing example capacities. Note that the maximum
* index that the get/put() functions is just nr_objects-1. This
* basically means that you get 4MB of storage on 32-bit and 2MB on
* 64-bit.
*
*
* Element size | Objects | Objects |
* PAGE_SIZE=4k | 32-bit | 64-bit |
* ---------------------------------|
* 1 bytes | 4177920 | 2088960 |
* 2 bytes | 2088960 | 1044480 |
* 3 bytes | 1392300 | 696150 |
* 4 bytes | 1044480 | 522240 |
* 32 bytes | 130560 | 65408 |
* 33 bytes | 126480 | 63240 |
* 2048 bytes | 2040 | 1020 |
* 2049 bytes | 1020 | 510 |
* void * | 1044480 | 261120 |
*
* Since 64-bit pointers are twice the size, we lose half the
* capacity in the base structure. Also note that no effort is made
* to efficiently pack objects across page boundaries.
*/
struct flex_array *flex_array_alloc(int element_size, unsigned int total,
gfp_t flags)
{
struct flex_array *ret;
int elems_per_part = 0;
int max_size = 0;
struct reciprocal_value reciprocal_elems = { 0 };
if (element_size) {
elems_per_part = FLEX_ARRAY_ELEMENTS_PER_PART(element_size);
reciprocal_elems = reciprocal_value(elems_per_part);
max_size = FLEX_ARRAY_NR_BASE_PTRS * elems_per_part;
}
/* max_size will end up 0 if element_size > PAGE_SIZE */
if (total > max_size)
return NULL;
ret = kzalloc(sizeof(struct flex_array), flags);
if (!ret)
return NULL;
ret->element_size = element_size;
ret->total_nr_elements = total;
ret->elems_per_part = elems_per_part;
ret->reciprocal_elems = reciprocal_elems;
if (elements_fit_in_base(ret) && !(flags & __GFP_ZERO))
memset(&ret->parts[0], FLEX_ARRAY_FREE,
FLEX_ARRAY_BASE_BYTES_LEFT);
return ret;
}
EXPORT_SYMBOL(flex_array_alloc);
static int fa_element_to_part_nr(struct flex_array *fa,
unsigned int element_nr)
{
/*
* if element_size == 0 we don't get here, so we never touch
* the zeroed fa->reciprocal_elems, which would yield invalid
* results
*/
return reciprocal_divide(element_nr, fa->reciprocal_elems);
}
/**
* flex_array_free_parts - just free the second-level pages
* @fa: the flex array from which to free parts
*
* This is to be used in cases where the base 'struct flex_array'
* has been statically allocated and should not be free.
*/
void flex_array_free_parts(struct flex_array *fa)
{
int part_nr;
if (elements_fit_in_base(fa))
return;
for (part_nr = 0; part_nr < FLEX_ARRAY_NR_BASE_PTRS; part_nr++)
kfree(fa->parts[part_nr]);
}
EXPORT_SYMBOL(flex_array_free_parts);
void flex_array_free(struct flex_array *fa)
{
flex_array_free_parts(fa);
kfree(fa);
}
EXPORT_SYMBOL(flex_array_free);
static unsigned int index_inside_part(struct flex_array *fa,
unsigned int element_nr,
unsigned int part_nr)
{
unsigned int part_offset;
part_offset = element_nr - part_nr * fa->elems_per_part;
return part_offset * fa->element_size;
}
static struct flex_array_part *
__fa_get_part(struct flex_array *fa, int part_nr, gfp_t flags)
{
struct flex_array_part *part = fa->parts[part_nr];
if (!part) {
part = kmalloc(sizeof(struct flex_array_part), flags);
if (!part)
return NULL;
if (!(flags & __GFP_ZERO))
memset(part, FLEX_ARRAY_FREE,
sizeof(struct flex_array_part));
fa->parts[part_nr] = part;
}
return part;
}
/**
* flex_array_put - copy data into the array at @element_nr
* @fa: the flex array to copy data into
* @element_nr: index of the position in which to insert
* the new element.
* @src: address of data to copy into the array
* @flags: page allocation flags to use for array expansion
*
*
* Note that this *copies* the contents of @src into
* the array. If you are trying to store an array of
* pointers, make sure to pass in &ptr instead of ptr.
* You may instead wish to use the flex_array_put_ptr()
* helper function.
*
* Locking must be provided by the caller.
*/
int flex_array_put(struct flex_array *fa, unsigned int element_nr, void *src,
gfp_t flags)
{
int part_nr = 0;
struct flex_array_part *part;
void *dst;
if (element_nr >= fa->total_nr_elements)
return -ENOSPC;
if (!fa->element_size)
return 0;
if (elements_fit_in_base(fa))
part = (struct flex_array_part *)&fa->parts[0];
else {
part_nr = fa_element_to_part_nr(fa, element_nr);
part = __fa_get_part(fa, part_nr, flags);
if (!part)
return -ENOMEM;
}
dst = &part->elements[index_inside_part(fa, element_nr, part_nr)];
memcpy(dst, src, fa->element_size);
return 0;
}
EXPORT_SYMBOL(flex_array_put);
/**
* flex_array_clear - clear element in array at @element_nr
* @fa: the flex array of the element.
* @element_nr: index of the position to clear.
*
* Locking must be provided by the caller.
*/
int flex_array_clear(struct flex_array *fa, unsigned int element_nr)
{
int part_nr = 0;
struct flex_array_part *part;
void *dst;
if (element_nr >= fa->total_nr_elements)
return -ENOSPC;
if (!fa->element_size)
return 0;
if (elements_fit_in_base(fa))
part = (struct flex_array_part *)&fa->parts[0];
else {
part_nr = fa_element_to_part_nr(fa, element_nr);
part = fa->parts[part_nr];
if (!part)
return -EINVAL;
}
dst = &part->elements[index_inside_part(fa, element_nr, part_nr)];
memset(dst, FLEX_ARRAY_FREE, fa->element_size);
return 0;
}
EXPORT_SYMBOL(flex_array_clear);
/**
* flex_array_prealloc - guarantee that array space exists
* @fa: the flex array for which to preallocate parts
* @start: index of first array element for which space is allocated
* @nr_elements: number of elements for which space is allocated
* @flags: page allocation flags
*
* This will guarantee that no future calls to flex_array_put()
* will allocate memory. It can be used if you are expecting to
* be holding a lock or in some atomic context while writing
* data into the array.
*
* Locking must be provided by the caller.
*/
int flex_array_prealloc(struct flex_array *fa, unsigned int start,
unsigned int nr_elements, gfp_t flags)
{
int start_part;
int end_part;
int part_nr;
unsigned int end;
struct flex_array_part *part;
if (!start && !nr_elements)
return 0;
if (start >= fa->total_nr_elements)
return -ENOSPC;
if (!nr_elements)
return 0;
end = start + nr_elements - 1;
if (end >= fa->total_nr_elements)
return -ENOSPC;
if (!fa->element_size)
return 0;
if (elements_fit_in_base(fa))
return 0;
start_part = fa_element_to_part_nr(fa, start);
end_part = fa_element_to_part_nr(fa, end);
for (part_nr = start_part; part_nr <= end_part; part_nr++) {
part = __fa_get_part(fa, part_nr, flags);
if (!part)
return -ENOMEM;
}
return 0;
}
EXPORT_SYMBOL(flex_array_prealloc);
/**
* flex_array_get - pull data back out of the array
* @fa: the flex array from which to extract data
* @element_nr: index of the element to fetch from the array
*
* Returns a pointer to the data at index @element_nr. Note
* that this is a copy of the data that was passed in. If you
* are using this to store pointers, you'll get back &ptr. You
* may instead wish to use the flex_array_get_ptr helper.
*
* Locking must be provided by the caller.
*/
void *flex_array_get(struct flex_array *fa, unsigned int element_nr)
{
int part_nr = 0;
struct flex_array_part *part;
if (!fa->element_size)
return NULL;
if (element_nr >= fa->total_nr_elements)
return NULL;
if (elements_fit_in_base(fa))
part = (struct flex_array_part *)&fa->parts[0];
else {
part_nr = fa_element_to_part_nr(fa, element_nr);
part = fa->parts[part_nr];
if (!part)
return NULL;
}
return &part->elements[index_inside_part(fa, element_nr, part_nr)];
}
EXPORT_SYMBOL(flex_array_get);
/**
* flex_array_get_ptr - pull a ptr back out of the array
* @fa: the flex array from which to extract data
* @element_nr: index of the element to fetch from the array
*
* Returns the pointer placed in the flex array at element_nr using
* flex_array_put_ptr(). This function should not be called if the
* element in question was not set using the _put_ptr() helper.
*/
void *flex_array_get_ptr(struct flex_array *fa, unsigned int element_nr)
{
void **tmp;
tmp = flex_array_get(fa, element_nr);
if (!tmp)
return NULL;
return *tmp;
}
EXPORT_SYMBOL(flex_array_get_ptr);
static int part_is_free(struct flex_array_part *part)
{
int i;
for (i = 0; i < sizeof(struct flex_array_part); i++)
if (part->elements[i] != FLEX_ARRAY_FREE)
return 0;
return 1;
}
/**
* flex_array_shrink - free unused second-level pages
* @fa: the flex array to shrink
*
* Frees all second-level pages that consist solely of unused
* elements. Returns the number of pages freed.
*
* Locking must be provided by the caller.
*/
int flex_array_shrink(struct flex_array *fa)
{
struct flex_array_part *part;
int part_nr;
int ret = 0;
if (!fa->total_nr_elements || !fa->element_size)
return 0;
if (elements_fit_in_base(fa))
return ret;
for (part_nr = 0; part_nr < FLEX_ARRAY_NR_BASE_PTRS; part_nr++) {
part = fa->parts[part_nr];
if (!part)
continue;
if (part_is_free(part)) {
fa->parts[part_nr] = NULL;
kfree(part);
ret++;
}
}
return ret;
}
EXPORT_SYMBOL(flex_array_shrink);
...@@ -87,9 +87,6 @@ ...@@ -87,9 +87,6 @@
#define MUTEX_DEBUG_INIT 0x11 #define MUTEX_DEBUG_INIT 0x11
#define MUTEX_DEBUG_FREE 0x22 #define MUTEX_DEBUG_FREE 0x22
/********** lib/flex_array.c **********/
#define FLEX_ARRAY_FREE 0x6c /* for use-after-free poisoning */
/********** security/ **********/ /********** security/ **********/
#define KEY_DESTROY 0xbd #define KEY_DESTROY 0xbd
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment