Skip to content

L
linux
Commit 58b36967 authored by Sean Wang's avatar Sean Wang Committed by Matthias Brugger
Browse files
Options

arm: dts: mt7623: use - instead of _ in DT node name 

It should be good that no use "_" is in DT node name. Consequently,
those nodes in certain files which have an inappropriate name containing
"_" are all being replaced with "-".
Signed-off-by: default avatarSean Wang <sean.wang@mediatek.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: devicetree@vger.kernel.org
Signed-off-by: default avatarMatthias Brugger <matthias.bgg@gmail.com>
parent f59c89df
Hide whitespace changes
Inline Side-by-side
Showing with 34 additions and 34 deletions
arch/arm/boot/dts/mt7623.dtsi
View file @ 58b36967
......@@ -28,7 +28,7 @@ / {
compatible = "mediatek,mt7623";
interrupt-parent = <&sysirq>;
cpu_opp_table: opp_table {
cpu_opp_table: opp-table {
compatible = "operating-points-v2";
opp-shared;
......@@ -147,32 +147,32 @@ clk26m: oscillator@0 {
};
thermal-zones {
cpu_thermal: cpu_thermal {
cpu_thermal: cpu-thermal {
polling-delay-passive = <1000>;
polling-delay = <1000>;
thermal-sensors = <&thermal 0>;
trips {
cpu_passive: cpu_passive {
cpu_passive: cpu-passive {
temperature = <47000>;
hysteresis = <2000>;
type = "passive";
};
cpu_active: cpu_active {
cpu_active: cpu-active {
temperature = <67000>;
hysteresis = <2000>;
type = "active";
};
cpu_hot: cpu_hot {
cpu_hot: cpu-hot {
temperature = <87000>;
hysteresis = <2000>;
type = "hot";
};
cpu_crit {
cpu-crit {
temperature = <107000>;
hysteresis = <2000>;
type = "critical";
......
arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
View file @ 58b36967
......@@ -66,7 +66,7 @@ reg_5v: regulator-5v {
regulator-always-on;
};
gpio_keys {
gpio-keys {
compatible = "gpio-keys";
pinctrl-names = "default";
pinctrl-0 = <&key_pins_a>;
......@@ -237,14 +237,14 @@ &mmc1 {
&pio {
cir_pins_a:cir@0 {
pins_cir {
pins-cir {
pinmux = <MT7623_PIN_46_IR_FUNC_IR>;
bias-disable;
};
};
i2c0_pins_a: i2c@0 {
pins_i2c0 {
pins-i2c0 {
pinmux = <MT7623_PIN_75_SDA0_FUNC_SDA0>,
<MT7623_PIN_76_SCL0_FUNC_SCL0>;
bias-disable;
......@@ -252,7 +252,7 @@ pins_i2c0 {
};
i2c1_pins_a: i2c@1 {
pin_i2c1 {
pin-i2c1 {
pinmux = <MT7623_PIN_57_SDA1_FUNC_SDA1>,
<MT7623_PIN_58_SCL1_FUNC_SCL1>;
bias-disable;
......@@ -260,7 +260,7 @@ pin_i2c1 {
};
i2s0_pins_a: i2s@0 {
pin_i2s0 {
pin-i2s0 {
pinmux = <MT7623_PIN_49_I2S0_DATA_FUNC_I2S0_DATA>,
<MT7623_PIN_72_I2S0_DATA_IN_FUNC_I2S0_DATA_IN>,
<MT7623_PIN_73_I2S0_LRCK_FUNC_I2S0_LRCK>,
......@@ -272,7 +272,7 @@ pin_i2s0 {
};
i2s1_pins_a: i2s@1 {
pin_i2s1 {
pin-i2s1 {
pinmux = <MT7623_PIN_33_I2S1_DATA_FUNC_I2S1_DATA>,
<MT7623_PIN_34_I2S1_DATA_IN_FUNC_I2S1_DATA_IN>,
<MT7623_PIN_35_I2S1_BCK_FUNC_I2S1_BCK>,
......@@ -284,7 +284,7 @@ pin_i2s1 {
};
key_pins_a: keys@0 {
pins_keys {
pins-keys {
pinmux = <MT7623_PIN_256_GPIO256_FUNC_GPIO256>,
<MT7623_PIN_257_GPIO257_FUNC_GPIO257> ;
input-enable;
......@@ -292,7 +292,7 @@ pins_keys {
};
led_pins_a: leds@0 {
pins_leds {
pins-leds {
pinmux = <MT7623_PIN_239_EXT_SDIO0_FUNC_GPIO239>,
<MT7623_PIN_240_EXT_XCS_FUNC_GPIO240>,
<MT7623_PIN_241_EXT_SCK_FUNC_GPIO241>;
......@@ -300,7 +300,7 @@ pins_leds {
};
mmc0_pins_default: mmc0default {
pins_cmd_dat {
pins-cmd-dat {
pinmux = <MT7623_PIN_111_MSDC0_DAT7_FUNC_MSDC0_DAT7>,
<MT7623_PIN_112_MSDC0_DAT6_FUNC_MSDC0_DAT6>,
<MT7623_PIN_113_MSDC0_DAT5_FUNC_MSDC0_DAT5>,
......@@ -314,19 +314,19 @@ pins_cmd_dat {
bias-pull-up;
};
pins_clk {
pins-clk {
pinmux = <MT7623_PIN_117_MSDC0_CLK_FUNC_MSDC0_CLK>;
bias-pull-down;
};
pins_rst {
pins-rst {
pinmux = <MT7623_PIN_115_MSDC0_RSTB_FUNC_MSDC0_RSTB>;
bias-pull-up;
};
};
mmc0_pins_uhs: mmc0 {
pins_cmd_dat {
pins-cmd-dat {
pinmux = <MT7623_PIN_111_MSDC0_DAT7_FUNC_MSDC0_DAT7>,
<MT7623_PIN_112_MSDC0_DAT6_FUNC_MSDC0_DAT6>,
<MT7623_PIN_113_MSDC0_DAT5_FUNC_MSDC0_DAT5>,
......@@ -341,20 +341,20 @@ pins_cmd_dat {
bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
};
pins_clk {
pins-clk {
pinmux = <MT7623_PIN_117_MSDC0_CLK_FUNC_MSDC0_CLK>;
drive-strength = <MTK_DRIVE_2mA>;
bias-pull-down = <MTK_PUPD_SET_R1R0_01>;
};
pins_rst {
pins-rst {
pinmux = <MT7623_PIN_115_MSDC0_RSTB_FUNC_MSDC0_RSTB>;
bias-pull-up;
};
};
mmc1_pins_default: mmc1default {
pins_cmd_dat {
pins-cmd-dat {
pinmux = <MT7623_PIN_107_MSDC1_DAT0_FUNC_MSDC1_DAT0>,
<MT7623_PIN_108_MSDC1_DAT1_FUNC_MSDC1_DAT1>,
<MT7623_PIN_109_MSDC1_DAT2_FUNC_MSDC1_DAT2>,
......@@ -365,26 +365,26 @@ pins_cmd_dat {
bias-pull-up = <MTK_PUPD_SET_R1R0_10>;
};
pins_clk {
pins-clk {
pinmux = <MT7623_PIN_106_MSDC1_CLK_FUNC_MSDC1_CLK>;
bias-pull-down;
drive-strength = <MTK_DRIVE_4mA>;
};
pins_wp {
pins-wp {
pinmux = <MT7623_PIN_29_EINT7_FUNC_MSDC1_WP>;
input-enable;
bias-pull-up;
};
pins_insert {
pins-insert {
pinmux = <MT7623_PIN_261_MSDC1_INS_FUNC_GPIO261>;
bias-pull-up;
};
};
mmc1_pins_uhs: mmc1 {
pins_cmd_dat {
pins-cmd-dat {
pinmux = <MT7623_PIN_107_MSDC1_DAT0_FUNC_MSDC1_DAT0>,
<MT7623_PIN_108_MSDC1_DAT1_FUNC_MSDC1_DAT1>,
<MT7623_PIN_109_MSDC1_DAT2_FUNC_MSDC1_DAT2>,
......@@ -395,7 +395,7 @@ pins_cmd_dat {
bias-pull-up = <MTK_PUPD_SET_R1R0_10>;
};
pins_clk {
pins-clk {
pinmux = <MT7623_PIN_106_MSDC1_CLK_FUNC_MSDC1_CLK>;
drive-strength = <MTK_DRIVE_4mA>;
bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
......@@ -403,7 +403,7 @@ pins_clk {
};
pwm_pins_a: pwm@0 {
pins_pwm {
pins-pwm {
pinmux = <MT7623_PIN_203_PWM0_FUNC_PWM0>,
<MT7623_PIN_204_PWM1_FUNC_PWM1>,
<MT7623_PIN_205_PWM2_FUNC_PWM2>,
......@@ -413,7 +413,7 @@ pins_pwm {
};
spi0_pins_a: spi@0 {
pins_spi {
pins-spi {
pinmux = <MT7623_PIN_53_SPI0_CSN_FUNC_SPI0_CS>,
<MT7623_PIN_54_SPI0_CK_FUNC_SPI0_CK>,
<MT7623_PIN_55_SPI0_MI_FUNC_SPI0_MI>,
......@@ -423,21 +423,21 @@ pins_spi {
};
uart0_pins_a: uart@0 {
pins_dat {
pins-dat {
pinmux = <MT7623_PIN_79_URXD0_FUNC_URXD0>,
<MT7623_PIN_80_UTXD0_FUNC_UTXD0>;
};
};
uart1_pins_a: uart@1 {
pins_dat {
pins-dat {
pinmux = <MT7623_PIN_81_URXD1_FUNC_URXD1>,
<MT7623_PIN_82_UTXD1_FUNC_UTXD1>;
};
};
uart2_pins_a: uart@2 {
pins_dat {
pins-dat {
pinmux = <MT7623_PIN_14_GPIO14_FUNC_URXD2>,
<MT7623_PIN_15_GPIO15_FUNC_UTXD2>;
};
......
arch/arm/boot/dts/mt7623n-rfb-nand.dts
View file @ 58b36967
......@@ -81,13 +81,13 @@ partition@5140000 {
&pio {
nand_pins_default: nanddefault {
pins_ale {
pins-ale {
pinmux = <MT7623_PIN_116_MSDC0_CMD_FUNC_NALE>;
drive-strength = <MTK_DRIVE_8mA>;
bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
};
pins_dat {
pins-dat {
pinmux = <MT7623_PIN_111_MSDC0_DAT7_FUNC_NLD7>,
<MT7623_PIN_112_MSDC0_DAT6_FUNC_NLD6>,
<MT7623_PIN_114_MSDC0_DAT4_FUNC_NLD4>,
......@@ -102,7 +102,7 @@ pins_dat {
bias-pull-up;
};
pins_we {
pins-we {
pinmux = <MT7623_PIN_117_MSDC0_CLK_FUNC_NWEB>;
drive-strength = <MTK_DRIVE_8mA>;
bias-pull-up = <MTK_PUPD_SET_R1R0_10>;
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7