Commit 58c72f94 authored by Linus Torvalds's avatar Linus Torvalds

Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC fixes from Arnd Bergmann:
 "A first set of bug fixes that didn't make it for the merge window, and
  two Kconfig cleanups that still make sense at this point.

  Unfortunately, one of the two cleanups caused an unintended change in
  the original version, so we had to revert one part of it and do some
  more testing to ensure the rest is really fine.  There was also a
  last-minute rebase of the patches to remove another bad commit"

* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: use menuconfig for sub-arch menus
  ARM: multi_v7_defconfig: re-enable SDHCI drivers
  ARM: EXYNOS: Fix compilation warning
  ARM: exynos: move sysram info to exynos.c
  ARM: dts: Specify the NAND ECC scheme explicitly on Armada 385 DB board
  ARM: dts: Specify the NAND ECC scheme explicitly on Armada 375 DB board
  ARM: exynos: cleanup kconfig option display
  misc: vexpress: fix error handling vexpress_syscfg_regmap_init()
  ARM: Remove ARCH_HAS_CPUFREQ config option
  ARM: integrator: fix section mismatch problem
  ARM: mvebu: DT: fix OpenBlocks AX3-4 RAM size
  ARM: samsung: make SAMSUNG_DMADEV optional
  remoteproc: da8xx: don't select CMA on no-MMU
  bus/arm-cci: add dependency on OF && CPU_V7
  ARM: keystone requires ARM_PATCH_PHYS_VIRT
  ARM: omap2: fix am43xx dependency on l2x0 cache
parents 894e552c 21278aea
...@@ -175,13 +175,6 @@ config ARCH_HAS_ILOG2_U32 ...@@ -175,13 +175,6 @@ config ARCH_HAS_ILOG2_U32
config ARCH_HAS_ILOG2_U64 config ARCH_HAS_ILOG2_U64
bool bool
config ARCH_HAS_CPUFREQ
bool
help
Internal node to signify that the ARCH has CPUFREQ support
and that the relevant menu configurations are displayed for
it.
config ARCH_HAS_BANDGAP config ARCH_HAS_BANDGAP
bool bool
...@@ -318,7 +311,6 @@ config ARCH_MULTIPLATFORM ...@@ -318,7 +311,6 @@ config ARCH_MULTIPLATFORM
config ARCH_INTEGRATOR config ARCH_INTEGRATOR
bool "ARM Ltd. Integrator family" bool "ARM Ltd. Integrator family"
select ARCH_HAS_CPUFREQ
select ARM_AMBA select ARM_AMBA
select ARM_PATCH_PHYS_VIRT select ARM_PATCH_PHYS_VIRT
select AUTO_ZRELADDR select AUTO_ZRELADDR
...@@ -538,7 +530,6 @@ config ARCH_DOVE ...@@ -538,7 +530,6 @@ config ARCH_DOVE
config ARCH_KIRKWOOD config ARCH_KIRKWOOD
bool "Marvell Kirkwood" bool "Marvell Kirkwood"
select ARCH_HAS_CPUFREQ
select ARCH_REQUIRE_GPIOLIB select ARCH_REQUIRE_GPIOLIB
select CPU_FEROCEON select CPU_FEROCEON
select GENERIC_CLOCKEVENTS select GENERIC_CLOCKEVENTS
...@@ -637,7 +628,6 @@ config ARCH_LPC32XX ...@@ -637,7 +628,6 @@ config ARCH_LPC32XX
config ARCH_PXA config ARCH_PXA
bool "PXA2xx/PXA3xx-based" bool "PXA2xx/PXA3xx-based"
depends on MMU depends on MMU
select ARCH_HAS_CPUFREQ
select ARCH_MTD_XIP select ARCH_MTD_XIP
select ARCH_REQUIRE_GPIOLIB select ARCH_REQUIRE_GPIOLIB
select ARM_CPU_SUSPEND if PM select ARM_CPU_SUSPEND if PM
...@@ -707,7 +697,6 @@ config ARCH_RPC ...@@ -707,7 +697,6 @@ config ARCH_RPC
config ARCH_SA1100 config ARCH_SA1100
bool "SA1100-based" bool "SA1100-based"
select ARCH_HAS_CPUFREQ
select ARCH_MTD_XIP select ARCH_MTD_XIP
select ARCH_REQUIRE_GPIOLIB select ARCH_REQUIRE_GPIOLIB
select ARCH_SPARSEMEM_ENABLE select ARCH_SPARSEMEM_ENABLE
...@@ -725,7 +714,6 @@ config ARCH_SA1100 ...@@ -725,7 +714,6 @@ config ARCH_SA1100
config ARCH_S3C24XX config ARCH_S3C24XX
bool "Samsung S3C24XX SoCs" bool "Samsung S3C24XX SoCs"
select ARCH_HAS_CPUFREQ
select ARCH_REQUIRE_GPIOLIB select ARCH_REQUIRE_GPIOLIB
select ATAGS select ATAGS
select CLKDEV_LOOKUP select CLKDEV_LOOKUP
...@@ -746,7 +734,6 @@ config ARCH_S3C24XX ...@@ -746,7 +734,6 @@ config ARCH_S3C24XX
config ARCH_S3C64XX config ARCH_S3C64XX
bool "Samsung S3C64XX" bool "Samsung S3C64XX"
select ARCH_HAS_CPUFREQ
select ARCH_REQUIRE_GPIOLIB select ARCH_REQUIRE_GPIOLIB
select ARM_AMBA select ARM_AMBA
select ARM_VIC select ARM_VIC
...@@ -809,7 +796,6 @@ config ARCH_S5PC100 ...@@ -809,7 +796,6 @@ config ARCH_S5PC100
config ARCH_S5PV210 config ARCH_S5PV210
bool "Samsung S5PV210/S5PC110" bool "Samsung S5PV210/S5PC110"
select ARCH_HAS_CPUFREQ
select ARCH_HAS_HOLES_MEMORYMODEL select ARCH_HAS_HOLES_MEMORYMODEL
select ARCH_SPARSEMEM_ENABLE select ARCH_SPARSEMEM_ENABLE
select ATAGS select ATAGS
...@@ -845,7 +831,6 @@ config ARCH_DAVINCI ...@@ -845,7 +831,6 @@ config ARCH_DAVINCI
config ARCH_OMAP1 config ARCH_OMAP1
bool "TI OMAP1" bool "TI OMAP1"
depends on MMU depends on MMU
select ARCH_HAS_CPUFREQ
select ARCH_HAS_HOLES_MEMORYMODEL select ARCH_HAS_HOLES_MEMORYMODEL
select ARCH_OMAP select ARCH_OMAP
select ARCH_REQUIRE_GPIOLIB select ARCH_REQUIRE_GPIOLIB
...@@ -1009,8 +994,6 @@ source "arch/arm/mach-rockchip/Kconfig" ...@@ -1009,8 +994,6 @@ source "arch/arm/mach-rockchip/Kconfig"
source "arch/arm/mach-sa1100/Kconfig" source "arch/arm/mach-sa1100/Kconfig"
source "arch/arm/plat-samsung/Kconfig"
source "arch/arm/mach-socfpga/Kconfig" source "arch/arm/mach-socfpga/Kconfig"
source "arch/arm/mach-spear/Kconfig" source "arch/arm/mach-spear/Kconfig"
...@@ -1028,6 +1011,7 @@ source "arch/arm/mach-s5pc100/Kconfig" ...@@ -1028,6 +1011,7 @@ source "arch/arm/mach-s5pc100/Kconfig"
source "arch/arm/mach-s5pv210/Kconfig" source "arch/arm/mach-s5pv210/Kconfig"
source "arch/arm/mach-exynos/Kconfig" source "arch/arm/mach-exynos/Kconfig"
source "arch/arm/plat-samsung/Kconfig"
source "arch/arm/mach-shmobile/Kconfig" source "arch/arm/mach-shmobile/Kconfig"
...@@ -2109,9 +2093,7 @@ endmenu ...@@ -2109,9 +2093,7 @@ endmenu
menu "CPU Power Management" menu "CPU Power Management"
if ARCH_HAS_CPUFREQ
source "drivers/cpufreq/Kconfig" source "drivers/cpufreq/Kconfig"
endif
source "drivers/cpuidle/Kconfig" source "drivers/cpuidle/Kconfig"
......
...@@ -91,6 +91,8 @@ nand: nand@d0000 { ...@@ -91,6 +91,8 @@ nand: nand@d0000 {
marvell,nand-keep-config; marvell,nand-keep-config;
marvell,nand-enable-arbiter; marvell,nand-enable-arbiter;
nand-on-flash-bbt; nand-on-flash-bbt;
nand-ecc-strength = <4>;
nand-ecc-step-size = <512>;
partition@0 { partition@0 {
label = "U-Boot"; label = "U-Boot";
......
...@@ -98,6 +98,8 @@ flash@d0000 { ...@@ -98,6 +98,8 @@ flash@d0000 {
marvell,nand-keep-config; marvell,nand-keep-config;
marvell,nand-enable-arbiter; marvell,nand-enable-arbiter;
nand-on-flash-bbt; nand-on-flash-bbt;
nand-ecc-strength = <4>;
nand-ecc-step-size = <512>;
partition@0 { partition@0 {
label = "U-Boot"; label = "U-Boot";
......
...@@ -25,7 +25,7 @@ chosen { ...@@ -25,7 +25,7 @@ chosen {
memory { memory {
device_type = "memory"; device_type = "memory";
reg = <0 0x00000000 0 0xC0000000>; /* 3 GB */ reg = <0 0x00000000 0 0x40000000>; /* 1 GB soldered on */
}; };
soc { soc {
......
...@@ -300,6 +300,7 @@ CONFIG_MMC=y ...@@ -300,6 +300,7 @@ CONFIG_MMC=y
CONFIG_MMC_BLOCK_MINORS=16 CONFIG_MMC_BLOCK_MINORS=16
CONFIG_MMC_ARMMMCI=y CONFIG_MMC_ARMMMCI=y
CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_PLTFM=y
CONFIG_MMC_SDHCI_OF_ARASAN=y CONFIG_MMC_SDHCI_OF_ARASAN=y
CONFIG_MMC_SDHCI_ESDHC_IMX=y CONFIG_MMC_SDHCI_ESDHC_IMX=y
CONFIG_MMC_SDHCI_DOVE=y CONFIG_MMC_SDHCI_DOVE=y
......
...@@ -32,6 +32,7 @@ CONFIG_SOC_OMAP5=y ...@@ -32,6 +32,7 @@ CONFIG_SOC_OMAP5=y
CONFIG_SOC_AM33XX=y CONFIG_SOC_AM33XX=y
CONFIG_SOC_AM43XX=y CONFIG_SOC_AM43XX=y
CONFIG_SOC_DRA7XX=y CONFIG_SOC_DRA7XX=y
CONFIG_CACHE_L2X0=y
CONFIG_ARM_THUMBEE=y CONFIG_ARM_THUMBEE=y
CONFIG_ARM_ERRATA_411920=y CONFIG_ARM_ERRATA_411920=y
CONFIG_SMP=y CONFIG_SMP=y
......
config ARCH_BCM menuconfig ARCH_BCM
bool "Broadcom SoC Support" if ARCH_MULTI_V6_V7 bool "Broadcom SoC Support" if ARCH_MULTI_V6_V7
help help
This enables support for Broadcom ARM based SoC chips This enables support for Broadcom ARM based SoC chips
menu "Broadcom SoC Selection" if ARCH_BCM
depends on ARCH_BCM
config ARCH_BCM_MOBILE config ARCH_BCM_MOBILE
bool "Broadcom Mobile SoC Support" if ARCH_MULTI_V7 bool "Broadcom Mobile SoC Support" if ARCH_MULTI_V7
...@@ -88,4 +87,4 @@ config ARCH_BCM_5301X ...@@ -88,4 +87,4 @@ config ARCH_BCM_5301X
different SoC or with the older BCM47XX and BCM53XX based different SoC or with the older BCM47XX and BCM53XX based
network SoC using a MIPS CPU, they are supported by arch/mips/bcm47xx network SoC using a MIPS CPU, they are supported by arch/mips/bcm47xx
endmenu endif
config ARCH_BERLIN menuconfig ARCH_BERLIN
bool "Marvell Berlin SoCs" if ARCH_MULTI_V7 bool "Marvell Berlin SoCs" if ARCH_MULTI_V7
select ARCH_REQUIRE_GPIOLIB select ARCH_REQUIRE_GPIOLIB
select ARM_GIC select ARM_GIC
...@@ -9,8 +9,6 @@ config ARCH_BERLIN ...@@ -9,8 +9,6 @@ config ARCH_BERLIN
if ARCH_BERLIN if ARCH_BERLIN
menu "Marvell Berlin SoC variants"
config MACH_BERLIN_BG2 config MACH_BERLIN_BG2
bool "Marvell Armada 1500 (BG2)" bool "Marvell Armada 1500 (BG2)"
select CACHE_L2X0 select CACHE_L2X0
...@@ -30,6 +28,4 @@ config MACH_BERLIN_BG2Q ...@@ -30,6 +28,4 @@ config MACH_BERLIN_BG2Q
select HAVE_ARM_TWD if SMP select HAVE_ARM_TWD if SMP
select PINCTRL_BERLIN_BG2Q select PINCTRL_BERLIN_BG2Q
endmenu
endif endif
config ARCH_CNS3XXX menuconfig ARCH_CNS3XXX
bool "Cavium Networks CNS3XXX family" if ARCH_MULTI_V6 bool "Cavium Networks CNS3XXX family" if ARCH_MULTI_V6
select ARM_GIC select ARM_GIC
select PCI_DOMAINS if PCI select PCI_DOMAINS if PCI
help help
Support for Cavium Networks CNS3XXX platform. Support for Cavium Networks CNS3XXX platform.
menu "CNS3XXX platform type" if ARCH_CNS3XXX
depends on ARCH_CNS3XXX
config MACH_CNS3420VB config MACH_CNS3420VB
bool "Support for CNS3420 Validation Board" bool "Support for CNS3420 Validation Board"
...@@ -17,4 +16,4 @@ config MACH_CNS3420VB ...@@ -17,4 +16,4 @@ config MACH_CNS3420VB
This is a platform with an on-board ARM11 MPCore and has support This is a platform with an on-board ARM11 MPCore and has support
for USB, USB-OTG, MMC/SD/SDIO, SATA, PCI-E, etc. for USB, USB-OTG, MMC/SD/SDIO, SATA, PCI-E, etc.
endmenu endif
...@@ -39,7 +39,6 @@ config ARCH_DAVINCI_DA830 ...@@ -39,7 +39,6 @@ config ARCH_DAVINCI_DA830
config ARCH_DAVINCI_DA850 config ARCH_DAVINCI_DA850
bool "DA850/OMAP-L138/AM18x based system" bool "DA850/OMAP-L138/AM18x based system"
select ARCH_DAVINCI_DA8XX select ARCH_DAVINCI_DA8XX
select ARCH_HAS_CPUFREQ
select CP_INTC select CP_INTC
config ARCH_DAVINCI_DA8XX config ARCH_DAVINCI_DA8XX
......
...@@ -7,10 +7,9 @@ ...@@ -7,10 +7,9 @@
# Configuration options for the EXYNOS4 # Configuration options for the EXYNOS4
config ARCH_EXYNOS menuconfig ARCH_EXYNOS
bool "Samsung EXYNOS" if ARCH_MULTI_V7 bool "Samsung EXYNOS" if ARCH_MULTI_V7
select ARCH_HAS_BANDGAP select ARCH_HAS_BANDGAP
select ARCH_HAS_CPUFREQ
select ARCH_HAS_HOLES_MEMORYMODEL select ARCH_HAS_HOLES_MEMORYMODEL
select ARCH_REQUIRE_GPIOLIB select ARCH_REQUIRE_GPIOLIB
select ARM_AMBA select ARM_AMBA
...@@ -30,8 +29,6 @@ config ARCH_EXYNOS ...@@ -30,8 +29,6 @@ config ARCH_EXYNOS
if ARCH_EXYNOS if ARCH_EXYNOS
menu "SAMSUNG EXYNOS SoCs Support"
config ARCH_EXYNOS3 config ARCH_EXYNOS3
bool "SAMSUNG EXYNOS3" bool "SAMSUNG EXYNOS3"
select ARM_CPU_SUSPEND if PM select ARM_CPU_SUSPEND if PM
...@@ -118,8 +115,6 @@ config SOC_EXYNOS5800 ...@@ -118,8 +115,6 @@ config SOC_EXYNOS5800
default y default y
depends on SOC_EXYNOS5420 depends on SOC_EXYNOS5420
endmenu
config EXYNOS5420_MCPM config EXYNOS5420_MCPM
bool "Exynos5420 Multi-Cluster PM support" bool "Exynos5420 Multi-Cluster PM support"
depends on MCPM && SOC_EXYNOS5420 depends on MCPM && SOC_EXYNOS5420
......
...@@ -118,6 +118,7 @@ extern void __iomem *sysram_ns_base_addr; ...@@ -118,6 +118,7 @@ extern void __iomem *sysram_ns_base_addr;
extern void __iomem *sysram_base_addr; extern void __iomem *sysram_base_addr;
void exynos_init_io(void); void exynos_init_io(void);
void exynos_restart(enum reboot_mode mode, const char *cmd); void exynos_restart(enum reboot_mode mode, const char *cmd);
void exynos_sysram_init(void);
void exynos_cpuidle_init(void); void exynos_cpuidle_init(void);
void exynos_cpufreq_init(void); void exynos_cpufreq_init(void);
void exynos_init_late(void); void exynos_init_late(void);
......
...@@ -184,6 +184,28 @@ void __init exynos_cpufreq_init(void) ...@@ -184,6 +184,28 @@ void __init exynos_cpufreq_init(void)
platform_device_register_simple("exynos-cpufreq", -1, NULL, 0); platform_device_register_simple("exynos-cpufreq", -1, NULL, 0);
} }
void __iomem *sysram_base_addr;
void __iomem *sysram_ns_base_addr;
void __init exynos_sysram_init(void)
{
struct device_node *node;
for_each_compatible_node(node, NULL, "samsung,exynos4210-sysram") {
if (!of_device_is_available(node))
continue;
sysram_base_addr = of_iomap(node, 0);
break;
}
for_each_compatible_node(node, NULL, "samsung,exynos4210-sysram-ns") {
if (!of_device_is_available(node))
continue;
sysram_ns_base_addr = of_iomap(node, 0);
break;
}
}
void __init exynos_init_late(void) void __init exynos_init_late(void)
{ {
if (of_machine_is_compatible("samsung,exynos5440")) if (of_machine_is_compatible("samsung,exynos5440"))
...@@ -198,7 +220,7 @@ static int __init exynos_fdt_map_chipid(unsigned long node, const char *uname, ...@@ -198,7 +220,7 @@ static int __init exynos_fdt_map_chipid(unsigned long node, const char *uname,
int depth, void *data) int depth, void *data)
{ {
struct map_desc iodesc; struct map_desc iodesc;
__be32 *reg; const __be32 *reg;
int len; int len;
if (!of_flat_dt_is_compatible(node, "samsung,exynos4210-chipid") && if (!of_flat_dt_is_compatible(node, "samsung,exynos4210-chipid") &&
...@@ -271,6 +293,13 @@ static void __init exynos_dt_machine_init(void) ...@@ -271,6 +293,13 @@ static void __init exynos_dt_machine_init(void)
} }
} }
/*
* This is called from smp_prepare_cpus if we've built for SMP, but
* we still need to set it up for PM and firmware ops if not.
*/
if (!IS_ENABLED(SMP))
exynos_sysram_init();
exynos_cpuidle_init(); exynos_cpuidle_init();
exynos_cpufreq_init(); exynos_cpufreq_init();
......
...@@ -32,28 +32,6 @@ ...@@ -32,28 +32,6 @@
extern void exynos4_secondary_startup(void); extern void exynos4_secondary_startup(void);
void __iomem *sysram_base_addr;
void __iomem *sysram_ns_base_addr;
static void __init exynos_smp_prepare_sysram(void)
{
struct device_node *node;
for_each_compatible_node(node, NULL, "samsung,exynos4210-sysram") {
if (!of_device_is_available(node))
continue;
sysram_base_addr = of_iomap(node, 0);
break;
}
for_each_compatible_node(node, NULL, "samsung,exynos4210-sysram-ns") {
if (!of_device_is_available(node))
continue;
sysram_ns_base_addr = of_iomap(node, 0);
break;
}
}
static inline void __iomem *cpu_boot_reg_base(void) static inline void __iomem *cpu_boot_reg_base(void)
{ {
if (soc_is_exynos4210() && samsung_rev() == EXYNOS4210_REV_1_1) if (soc_is_exynos4210() && samsung_rev() == EXYNOS4210_REV_1_1)
...@@ -234,11 +212,11 @@ static void __init exynos_smp_prepare_cpus(unsigned int max_cpus) ...@@ -234,11 +212,11 @@ static void __init exynos_smp_prepare_cpus(unsigned int max_cpus)
{ {
int i; int i;
exynos_sysram_init();
if (read_cpuid_part_number() == ARM_CPU_PART_CORTEX_A9) if (read_cpuid_part_number() == ARM_CPU_PART_CORTEX_A9)
scu_enable(scu_base_addr()); scu_enable(scu_base_addr());
exynos_smp_prepare_sysram();
/* /*
* Write the address of secondary startup into the * Write the address of secondary startup into the
* system-wide flags register. The boot monitor waits * system-wide flags register. The boot monitor waits
......
config ARCH_HIGHBANK config ARCH_HIGHBANK
bool "Calxeda ECX-1000/2000 (Highbank/Midway)" if ARCH_MULTI_V7 bool "Calxeda ECX-1000/2000 (Highbank/Midway)" if ARCH_MULTI_V7
select ARCH_DMA_ADDR_T_64BIT if ARM_LPAE select ARCH_DMA_ADDR_T_64BIT if ARM_LPAE
select ARCH_HAS_CPUFREQ
select ARCH_HAS_HOLES_MEMORYMODEL select ARCH_HAS_HOLES_MEMORYMODEL
select ARCH_HAS_OPP select ARCH_HAS_OPP
select ARCH_SUPPORTS_BIG_ENDIAN select ARCH_SUPPORTS_BIG_ENDIAN
......
config ARCH_MXC menuconfig ARCH_MXC
bool "Freescale i.MX family" if ARCH_MULTI_V4_V5 || ARCH_MULTI_V6_V7 bool "Freescale i.MX family" if ARCH_MULTI_V4_V5 || ARCH_MULTI_V6_V7
select ARCH_HAS_CPUFREQ
select ARCH_HAS_OPP select ARCH_HAS_OPP
select ARCH_REQUIRE_GPIOLIB select ARCH_REQUIRE_GPIOLIB
select ARM_CPU_SUSPEND if PM select ARM_CPU_SUSPEND if PM
...@@ -13,8 +12,7 @@ config ARCH_MXC ...@@ -13,8 +12,7 @@ config ARCH_MXC
help help
Support for Freescale MXC/iMX-based family of processors Support for Freescale MXC/iMX-based family of processors
menu "Freescale i.MX support" if ARCH_MXC
depends on ARCH_MXC
config MXC_TZIC config MXC_TZIC
bool bool
...@@ -99,7 +97,6 @@ config SOC_IMX25 ...@@ -99,7 +97,6 @@ config SOC_IMX25
config SOC_IMX27 config SOC_IMX27
bool bool
select ARCH_HAS_CPUFREQ
select ARCH_HAS_OPP select ARCH_HAS_OPP
select CPU_ARM926T select CPU_ARM926T
select IMX_HAVE_IOMUX_V1 select IMX_HAVE_IOMUX_V1
...@@ -124,7 +121,6 @@ config SOC_IMX35 ...@@ -124,7 +121,6 @@ config SOC_IMX35
config SOC_IMX5 config SOC_IMX5
bool bool
select ARCH_HAS_CPUFREQ
select ARCH_HAS_OPP select ARCH_HAS_OPP
select ARCH_MXC_IOMUX_V3 select ARCH_MXC_IOMUX_V3
select MXC_TZIC select MXC_TZIC
...@@ -786,4 +782,4 @@ endif ...@@ -786,4 +782,4 @@ endif
source "arch/arm/mach-imx/devices/Kconfig" source "arch/arm/mach-imx/devices/Kconfig"
endmenu endif
...@@ -28,7 +28,7 @@ config ARCH_CINTEGRATOR ...@@ -28,7 +28,7 @@ config ARCH_CINTEGRATOR
bool bool
config INTEGRATOR_IMPD1 config INTEGRATOR_IMPD1
tristate "Include support for Integrator/IM-PD1" bool "Include support for Integrator/IM-PD1"
depends on ARCH_INTEGRATOR_AP depends on ARCH_INTEGRATOR_AP
select ARCH_REQUIRE_GPIOLIB select ARCH_REQUIRE_GPIOLIB
select ARM_VIC select ARM_VIC
......
...@@ -308,7 +308,12 @@ static struct impd1_device impd1_devs[] = { ...@@ -308,7 +308,12 @@ static struct impd1_device impd1_devs[] = {
*/ */
#define IMPD1_VALID_IRQS 0x00000bffU #define IMPD1_VALID_IRQS 0x00000bffU
static int __init impd1_probe(struct lm_device *dev) /*
* As this module is bool, it is OK to have this as __init_refok() - no
* probe calls will be done after the initial system bootup, as devices
* are discovered as part of the machine startup.
*/
static int __init_refok impd1_probe(struct lm_device *dev)
{ {
struct impd1_module *impd1; struct impd1_module *impd1;
int irq_base; int irq_base;
...@@ -397,6 +402,11 @@ static void impd1_remove(struct lm_device *dev) ...@@ -397,6 +402,11 @@ static void impd1_remove(struct lm_device *dev)
static struct lm_driver impd1_driver = { static struct lm_driver impd1_driver = {
.drv = { .drv = {
.name = "impd1", .name = "impd1",
/*
* As we're dropping the probe() function, suppress driver
* binding from sysfs.
*/
.suppress_bind_attrs = true,
}, },
.probe = impd1_probe, .probe = impd1_probe,
.remove = impd1_remove, .remove = impd1_remove,
......
config ARCH_KEYSTONE config ARCH_KEYSTONE
bool "Texas Instruments Keystone Devices" bool "Texas Instruments Keystone Devices"
depends on ARCH_MULTI_V7 depends on ARCH_MULTI_V7
depends on ARM_PATCH_PHYS_VIRT
select ARM_GIC select ARM_GIC
select HAVE_ARM_ARCH_TIMER select HAVE_ARM_ARCH_TIMER
select CLKSRC_MMIO select CLKSRC_MMIO
......
config ARCH_MOXART menuconfig ARCH_MOXART
bool "MOXA ART SoC" if ARCH_MULTI_V4 bool "MOXA ART SoC" if ARCH_MULTI_V4
select CPU_FA526 select CPU_FA526
select ARM_DMA_MEM_BUFFERABLE select ARM_DMA_MEM_BUFFERABLE
......
config ARCH_MVEBU menuconfig ARCH_MVEBU
bool "Marvell Engineering Business Unit (MVEBU) SoCs" if (ARCH_MULTI_V7 || ARCH_MULTI_V5) bool "Marvell Engineering Business Unit (MVEBU) SoCs" if (ARCH_MULTI_V7 || ARCH_MULTI_V5)
select ARCH_SUPPORTS_BIG_ENDIAN select ARCH_SUPPORTS_BIG_ENDIAN
select CLKSRC_MMIO select CLKSRC_MMIO
...@@ -13,8 +13,6 @@ config ARCH_MVEBU ...@@ -13,8 +13,6 @@ config ARCH_MVEBU
if ARCH_MVEBU if ARCH_MVEBU
menu "Marvell EBU SoC variants"
config MACH_MVEBU_V7 config MACH_MVEBU_V7
bool bool
select ARMADA_370_XP_TIMER select ARMADA_370_XP_TIMER
...@@ -84,7 +82,6 @@ config MACH_DOVE ...@@ -84,7 +82,6 @@ config MACH_DOVE
config MACH_KIRKWOOD config MACH_KIRKWOOD
bool "Marvell Kirkwood boards" if ARCH_MULTI_V5 bool "Marvell Kirkwood boards" if ARCH_MULTI_V5
select ARCH_HAS_CPUFREQ
select ARCH_REQUIRE_GPIOLIB select ARCH_REQUIRE_GPIOLIB
select CPU_FEROCEON select CPU_FEROCEON
select KIRKWOOD_CLK select KIRKWOOD_CLK
...@@ -97,6 +94,4 @@ config MACH_KIRKWOOD ...@@ -97,6 +94,4 @@ config MACH_KIRKWOOD
Say 'Y' here if you want your kernel to support boards based Say 'Y' here if you want your kernel to support boards based
on the Marvell Kirkwood device tree. on the Marvell Kirkwood device tree.
endmenu
endif endif
config ARCH_NOMADIK menuconfig ARCH_NOMADIK
bool "ST-Ericsson Nomadik" bool "ST-Ericsson Nomadik"
depends on ARCH_MULTI_V5 depends on ARCH_MULTI_V5
select ARCH_REQUIRE_GPIOLIB select ARCH_REQUIRE_GPIOLIB
...@@ -15,7 +15,6 @@ config ARCH_NOMADIK ...@@ -15,7 +15,6 @@ config ARCH_NOMADIK
Support for the Nomadik platform by ST-Ericsson Support for the Nomadik platform by ST-Ericsson
if ARCH_NOMADIK if ARCH_NOMADIK
menu "Nomadik boards"
config MACH_NOMADIK_8815NHK config MACH_NOMADIK_8815NHK
bool "ST 8815 Nomadik Hardware Kit (evaluation board)" bool "ST 8815 Nomadik Hardware Kit (evaluation board)"
...@@ -24,7 +23,6 @@ config MACH_NOMADIK_8815NHK ...@@ -24,7 +23,6 @@ config MACH_NOMADIK_8815NHK
select I2C_ALGOBIT select I2C_ALGOBIT
select I2C_NOMADIK select I2C_NOMADIK
endmenu
endif endif
config NOMADIK_8815 config NOMADIK_8815
......
menu "TI OMAP/AM/DM/DRA Family"
depends on ARCH_MULTI_V6 || ARCH_MULTI_V7
config ARCH_OMAP config ARCH_OMAP
bool bool
...@@ -28,7 +31,6 @@ config ARCH_OMAP4 ...@@ -28,7 +31,6 @@ config ARCH_OMAP4
select ARM_CPU_SUSPEND if PM select ARM_CPU_SUSPEND if PM
select ARM_ERRATA_720789 select ARM_ERRATA_720789
select ARM_GIC select ARM_GIC
select CACHE_L2X0
select HAVE_ARM_SCU if SMP select HAVE_ARM_SCU if SMP
select HAVE_ARM_TWD if SMP select HAVE_ARM_TWD if SMP
select OMAP_INTERCONNECT select OMAP_INTERCONNECT
...@@ -80,7 +82,6 @@ config SOC_DRA7XX ...@@ -80,7 +82,6 @@ config SOC_DRA7XX
config ARCH_OMAP2PLUS config ARCH_OMAP2PLUS
bool bool
select ARCH_HAS_BANDGAP select ARCH_HAS_BANDGAP
select ARCH_HAS_CPUFREQ
select ARCH_HAS_HOLES_MEMORYMODEL select ARCH_HAS_HOLES_MEMORYMODEL
select ARCH_OMAP select ARCH_OMAP
select ARCH_REQUIRE_GPIOLIB select ARCH_REQUIRE_GPIOLIB
...@@ -343,3 +344,5 @@ config OMAP4_ERRATA_I688 ...@@ -343,3 +344,5 @@ config OMAP4_ERRATA_I688
endmenu endmenu
endif endif
endmenu
...@@ -91,7 +91,14 @@ extern void omap3_sync32k_timer_init(void); ...@@ -91,7 +91,14 @@ extern void omap3_sync32k_timer_init(void);
extern void omap3_secure_sync32k_timer_init(void); extern void omap3_secure_sync32k_timer_init(void);
extern void omap3_gptimer_timer_init(void); extern void omap3_gptimer_timer_init(void);
extern void omap4_local_timer_init(void); extern void omap4_local_timer_init(void);
#ifdef CONFIG_CACHE_L2X0
int omap_l2_cache_init(void); int omap_l2_cache_init(void);
#else
static inline int omap_l2_cache_init(void)
{
return 0;
}
#endif
extern void omap5_realtime_timer_init(void); extern void omap5_realtime_timer_init(void);
void omap2420_init_early(void); void omap2420_init_early(void);
......
config ARCH_SIRF menuconfig ARCH_SIRF
bool "CSR SiRF" if ARCH_MULTI_V7 bool "CSR SiRF" if ARCH_MULTI_V7
select ARCH_HAS_RESET_CONTROLLER select ARCH_HAS_RESET_CONTROLLER
select ARCH_REQUIRE_GPIOLIB select ARCH_REQUIRE_GPIOLIB
...@@ -11,7 +11,7 @@ config ARCH_SIRF ...@@ -11,7 +11,7 @@ config ARCH_SIRF
if ARCH_SIRF if ARCH_SIRF
menu "CSR SiRF atlas6/primaII/Marco/Polo Specific Features" comment "CSR SiRF atlas6/primaII/Marco/Polo Specific Features"
config ARCH_ATLAS6 config ARCH_ATLAS6
bool "CSR SiRFSoC ATLAS6 ARM Cortex A9 Platform" bool "CSR SiRFSoC ATLAS6 ARM Cortex A9 Platform"
...@@ -37,8 +37,6 @@ config ARCH_MARCO ...@@ -37,8 +37,6 @@ config ARCH_MARCO
help help
Support for CSR SiRFSoC ARM Cortex A9 Platform Support for CSR SiRFSoC ARM Cortex A9 Platform
endmenu
config SIRF_IRQ config SIRF_IRQ
bool bool
......
config ARCH_QCOM menuconfig ARCH_QCOM
bool "Qualcomm Support" if ARCH_MULTI_V7 bool "Qualcomm Support" if ARCH_MULTI_V7
select ARCH_REQUIRE_GPIOLIB select ARCH_REQUIRE_GPIOLIB
select ARM_GIC select ARM_GIC
...@@ -11,8 +11,6 @@ config ARCH_QCOM ...@@ -11,8 +11,6 @@ config ARCH_QCOM
if ARCH_QCOM if ARCH_QCOM
menu "Qualcomm SoC Selection"
config ARCH_MSM8X60 config ARCH_MSM8X60
bool "Enable support for MSM8X60" bool "Enable support for MSM8X60"
select CLKSRC_QCOM select CLKSRC_QCOM
...@@ -25,8 +23,6 @@ config ARCH_MSM8974 ...@@ -25,8 +23,6 @@ config ARCH_MSM8974
bool "Enable support for MSM8974" bool "Enable support for MSM8974"
select HAVE_ARM_ARCH_TIMER select HAVE_ARM_ARCH_TIMER
endmenu
config QCOM_SCM config QCOM_SCM
bool bool
......
...@@ -117,7 +117,7 @@ config S3C24XX_SETUP_TS ...@@ -117,7 +117,7 @@ config S3C24XX_SETUP_TS
Compile in platform device definition for Samsung TouchScreen. Compile in platform device definition for Samsung TouchScreen.
config S3C24XX_DMA config S3C24XX_DMA
bool "S3C2410 DMA support" bool "S3C2410 DMA support (deprecated)"
select S3C_DMA select S3C_DMA
help help
S3C2410 DMA support. This is needed for drivers like sound which S3C2410 DMA support. This is needed for drivers like sound which
......
...@@ -18,9 +18,9 @@ config CPU_S3C6410 ...@@ -18,9 +18,9 @@ config CPU_S3C6410
Enable S3C6410 CPU support Enable S3C6410 CPU support
config S3C64XX_PL080 config S3C64XX_PL080
bool "S3C64XX DMA using generic PL08x driver" def_bool DMADEVICES
select ARM_AMBA
select AMBA_PL08X select AMBA_PL08X
select SAMSUNG_DMADEV
config S3C64XX_SETUP_SDHCI config S3C64XX_SETUP_SDHCI
bool bool
......
...@@ -9,16 +9,18 @@ if ARCH_S5P64X0 ...@@ -9,16 +9,18 @@ if ARCH_S5P64X0
config CPU_S5P6440 config CPU_S5P6440
bool bool
select ARM_AMBA
select PL330_DMA if DMADEVICES
select S5P_SLEEP if PM select S5P_SLEEP if PM
select SAMSUNG_DMADEV
select SAMSUNG_WAKEMASK if PM select SAMSUNG_WAKEMASK if PM
help help
Enable S5P6440 CPU support Enable S5P6440 CPU support
config CPU_S5P6450 config CPU_S5P6450
bool bool
select ARM_AMBA
select PL330_DMA if DMADEVICES
select S5P_SLEEP if PM select S5P_SLEEP if PM
select SAMSUNG_DMADEV
select SAMSUNG_WAKEMASK if PM select SAMSUNG_WAKEMASK if PM
help help
Enable S5P6450 CPU support Enable S5P6450 CPU support
......
...@@ -9,8 +9,9 @@ if ARCH_S5PC100 ...@@ -9,8 +9,9 @@ if ARCH_S5PC100
config CPU_S5PC100 config CPU_S5PC100
bool bool
select ARM_AMBA
select PL330_DMA if DMADEVICES
select S5P_EXT_INT select S5P_EXT_INT
select SAMSUNG_DMADEV
help help
Enable S5PC100 CPU support Enable S5PC100 CPU support
......
...@@ -11,10 +11,11 @@ if ARCH_S5PV210 ...@@ -11,10 +11,11 @@ if ARCH_S5PV210
config CPU_S5PV210 config CPU_S5PV210
bool bool
select ARM_AMBA
select PL330_DMA if DMADEVICES
select S5P_EXT_INT select S5P_EXT_INT
select S5P_PM if PM select S5P_PM if PM
select S5P_SLEEP if PM select S5P_SLEEP if PM
select SAMSUNG_DMADEV
help help
Enable S5PV210 CPU support Enable S5PV210 CPU support
......
config ARCH_SHMOBILE config ARCH_SHMOBILE
bool bool
config ARCH_SHMOBILE_MULTI menuconfig ARCH_SHMOBILE_MULTI
bool "Renesas ARM SoCs" if ARCH_MULTI_V7 bool "Renesas ARM SoCs" if ARCH_MULTI_V7
depends on MMU depends on MMU
select ARCH_SHMOBILE select ARCH_SHMOBILE
...@@ -15,7 +15,7 @@ config ARCH_SHMOBILE_MULTI ...@@ -15,7 +15,7 @@ config ARCH_SHMOBILE_MULTI
if ARCH_SHMOBILE_MULTI if ARCH_SHMOBILE_MULTI
comment "Renesas ARM SoCs System Type" #comment "Renesas ARM SoCs System Type"
config ARCH_EMEV2 config ARCH_EMEV2
bool "Emma Mobile EV2" bool "Emma Mobile EV2"
...@@ -85,7 +85,6 @@ config ARCH_R8A73A4 ...@@ -85,7 +85,6 @@ config ARCH_R8A73A4
select CPU_V7 select CPU_V7
select SH_CLK_CPG select SH_CLK_CPG
select RENESAS_IRQC select RENESAS_IRQC
select ARCH_HAS_CPUFREQ
select ARCH_HAS_OPP select ARCH_HAS_OPP
select SYS_SUPPORTS_SH_CMT select SYS_SUPPORTS_SH_CMT
select SYS_SUPPORTS_SH_TMU select SYS_SUPPORTS_SH_TMU
...@@ -264,7 +263,6 @@ config MACH_KOELSCH ...@@ -264,7 +263,6 @@ config MACH_KOELSCH
config MACH_KZM9G config MACH_KZM9G
bool "KZM-A9-GT board" bool "KZM-A9-GT board"
depends on ARCH_SH73A0 depends on ARCH_SH73A0
select ARCH_HAS_CPUFREQ
select ARCH_HAS_OPP select ARCH_HAS_OPP
select ARCH_REQUIRE_GPIOLIB select ARCH_REQUIRE_GPIOLIB
select REGULATOR_FIXED_VOLTAGE if REGULATOR select REGULATOR_FIXED_VOLTAGE if REGULATOR
......
...@@ -14,7 +14,6 @@ if PLAT_SPEAR ...@@ -14,7 +14,6 @@ if PLAT_SPEAR
config ARCH_SPEAR13XX config ARCH_SPEAR13XX
bool "ST SPEAr13xx" bool "ST SPEAr13xx"
depends on ARCH_MULTI_V7 || PLAT_SPEAR_SINGLE depends on ARCH_MULTI_V7 || PLAT_SPEAR_SINGLE
select ARCH_HAS_CPUFREQ
select ARM_GIC select ARM_GIC
select GPIO_SPEAR_SPICS select GPIO_SPEAR_SPICS
select HAVE_ARM_SCU if SMP select HAVE_ARM_SCU if SMP
......
menuconfig ARCH_STI menuconfig ARCH_STI
bool "STMicroelectronics Consumer Electronics SOCs with Device Trees" if ARCH_MULTI_V7 bool "STMicroelectronics Consumer Electronics SOCs" if ARCH_MULTI_V7
select ARM_GIC select ARM_GIC
select ARM_GLOBAL_TIMER select ARM_GLOBAL_TIMER
select PINCTRL select PINCTRL
......
config ARCH_TEGRA menuconfig ARCH_TEGRA
bool "NVIDIA Tegra" if ARCH_MULTI_V7 bool "NVIDIA Tegra" if ARCH_MULTI_V7
select ARCH_HAS_CPUFREQ
select ARCH_REQUIRE_GPIOLIB select ARCH_REQUIRE_GPIOLIB
select ARCH_SUPPORTS_TRUSTED_FOUNDATIONS select ARCH_SUPPORTS_TRUSTED_FOUNDATIONS
select ARM_GIC select ARM_GIC
...@@ -16,8 +15,7 @@ config ARCH_TEGRA ...@@ -16,8 +15,7 @@ config ARCH_TEGRA
help help
This enables support for NVIDIA Tegra based systems. This enables support for NVIDIA Tegra based systems.
menu "NVIDIA Tegra options" if ARCH_TEGRA
depends on ARCH_TEGRA
config ARCH_TEGRA_2x_SOC config ARCH_TEGRA_2x_SOC
bool "Enable support for Tegra20 family" bool "Enable support for Tegra20 family"
...@@ -69,4 +67,4 @@ config TEGRA_AHB ...@@ -69,4 +67,4 @@ config TEGRA_AHB
which controls AHB bus master arbitration and some which controls AHB bus master arbitration and some
performance parameters(priority, prefech size). performance parameters(priority, prefech size).
endmenu endif
config ARCH_U300 menuconfig ARCH_U300
bool "ST-Ericsson U300 Series" if ARCH_MULTI_V5 bool "ST-Ericsson U300 Series" if ARCH_MULTI_V5
depends on MMU depends on MMU
select ARCH_REQUIRE_GPIOLIB select ARCH_REQUIRE_GPIOLIB
...@@ -16,8 +16,6 @@ config ARCH_U300 ...@@ -16,8 +16,6 @@ config ARCH_U300
if ARCH_U300 if ARCH_U300
menu "ST-Ericsson AB U300/U335 Platform"
config MACH_U300 config MACH_U300
depends on ARCH_U300 depends on ARCH_U300
bool "U300" bool "U300"
...@@ -43,6 +41,4 @@ config MACH_U300_SPIDUMMY ...@@ -43,6 +41,4 @@ config MACH_U300_SPIDUMMY
you don't need it. Selecting this will activate the you don't need it. Selecting this will activate the
SPI framework and ARM PL022 support. SPI framework and ARM PL022 support.
endmenu
endif endif
config ARCH_U8500 menuconfig ARCH_U8500
bool "ST-Ericsson U8500 Series" if ARCH_MULTI_V7 bool "ST-Ericsson U8500 Series" if ARCH_MULTI_V7
depends on MMU depends on MMU
select AB8500_CORE select AB8500_CORE
select ABX500_CORE select ABX500_CORE
select ARCH_HAS_CPUFREQ
select ARCH_REQUIRE_GPIOLIB select ARCH_REQUIRE_GPIOLIB
select ARM_AMBA select ARM_AMBA
select ARM_ERRATA_754322 select ARM_ERRATA_754322
...@@ -34,8 +33,6 @@ config UX500_SOC_DB8500 ...@@ -34,8 +33,6 @@ config UX500_SOC_DB8500
select REGULATOR select REGULATOR
select REGULATOR_DB8500_PRCMU select REGULATOR_DB8500_PRCMU
menu "Ux500 target platform (boards)"
config MACH_MOP500 config MACH_MOP500
bool "U8500 Development platform, MOP500 versions" bool "U8500 Development platform, MOP500 versions"
select I2C select I2C
...@@ -68,8 +65,6 @@ config UX500_AUTO_PLATFORM ...@@ -68,8 +65,6 @@ config UX500_AUTO_PLATFORM
a working kernel. If everything else is disabled, this a working kernel. If everything else is disabled, this
automatically enables MACH_MOP500. automatically enables MACH_MOP500.
endmenu
config UX500_DEBUG_UART config UX500_DEBUG_UART
int "Ux500 UART to use for low-level debug" int "Ux500 UART to use for low-level debug"
default 2 default 2
......
config ARCH_VEXPRESS menuconfig ARCH_VEXPRESS
bool "ARM Ltd. Versatile Express family" if ARCH_MULTI_V7 bool "ARM Ltd. Versatile Express family" if ARCH_MULTI_V7
select ARCH_REQUIRE_GPIOLIB select ARCH_REQUIRE_GPIOLIB
select ARCH_SUPPORTS_BIG_ENDIAN select ARCH_SUPPORTS_BIG_ENDIAN
...@@ -37,8 +37,7 @@ config ARCH_VEXPRESS ...@@ -37,8 +37,7 @@ config ARCH_VEXPRESS
platforms. The traditional (ATAGs) boot method is not usable on platforms. The traditional (ATAGs) boot method is not usable on
these boards with this option. these boards with this option.
menu "Versatile Express platform type" if ARCH_VEXPRESS
depends on ARCH_VEXPRESS
config ARCH_VEXPRESS_CORTEX_A5_A9_ERRATA config ARCH_VEXPRESS_CORTEX_A5_A9_ERRATA
bool "Enable A5 and A9 only errata work-arounds" bool "Enable A5 and A9 only errata work-arounds"
...@@ -65,7 +64,6 @@ config ARCH_VEXPRESS_DCSCB ...@@ -65,7 +64,6 @@ config ARCH_VEXPRESS_DCSCB
config ARCH_VEXPRESS_SPC config ARCH_VEXPRESS_SPC
bool "Versatile Express Serial Power Controller (SPC)" bool "Versatile Express Serial Power Controller (SPC)"
select ARCH_HAS_CPUFREQ
select ARCH_HAS_OPP select ARCH_HAS_OPP
select PM_OPP select PM_OPP
help help
...@@ -83,4 +81,4 @@ config ARCH_VEXPRESS_TC2_PM ...@@ -83,4 +81,4 @@ config ARCH_VEXPRESS_TC2_PM
Support for CPU and cluster power management on Versatile Express Support for CPU and cluster power management on Versatile Express
with a TC2 (A15x2 A7x3) big.LITTLE core tile. with a TC2 (A15x2 A7x3) big.LITTLE core tile.
endmenu endif
config ARCH_VT8500 config ARCH_VT8500
bool bool
select ARCH_HAS_CPUFREQ
select ARCH_REQUIRE_GPIOLIB select ARCH_REQUIRE_GPIOLIB
select CLKDEV_LOOKUP select CLKDEV_LOOKUP
select VT8500_TIMER select VT8500_TIMER
......
config ARCH_ZYNQ config ARCH_ZYNQ
bool "Xilinx Zynq ARM Cortex A9 Platform" if ARCH_MULTI_V7 bool "Xilinx Zynq ARM Cortex A9 Platform" if ARCH_MULTI_V7
select ARCH_HAS_CPUFREQ
select ARCH_HAS_OPP select ARCH_HAS_OPP
select ARCH_SUPPORTS_BIG_ENDIAN select ARCH_SUPPORTS_BIG_ENDIAN
select ARM_AMBA select ARM_AMBA
......
...@@ -35,27 +35,15 @@ config SAMSUNG_PM ...@@ -35,27 +35,15 @@ config SAMSUNG_PM
Base platform power management code for samsung code Base platform power management code for samsung code
if PLAT_SAMSUNG if PLAT_SAMSUNG
menu "Samsung Common options"
# boot configurations # boot configurations
comment "Boot options" comment "Boot options"
config S3C_BOOT_ERROR_RESET
bool "S3C Reboot on decompression error"
help
Say y here to use the watchdog to reset the system if the
kernel decompressor detects an error during decompression.
config S3C_BOOT_UART_FORCE_FIFO
bool "Force UART FIFO on during boot process"
default y
help
Say Y here to force the UART FIFOs on during the kernel
uncompressor
config S3C_LOWLEVEL_UART_PORT config S3C_LOWLEVEL_UART_PORT
int "S3C UART to use for low-level messages" int "S3C UART to use for low-level messages"
depends on ARCH_S3C64XX
default 0 default 0
help help
Choice of which UART port to use for the low-level messages, Choice of which UART port to use for the low-level messages,
...@@ -407,17 +395,16 @@ config SAMSUNG_PM_GPIO ...@@ -407,17 +395,16 @@ config SAMSUNG_PM_GPIO
Include legacy GPIO power management code for platforms not using Include legacy GPIO power management code for platforms not using
pinctrl-samsung driver. pinctrl-samsung driver.
endif
config SAMSUNG_DMADEV config SAMSUNG_DMADEV
bool bool "Use legacy Samsung DMA abstraction"
select ARM_AMBA depends on CPU_S5PV210 || CPU_S5PC100 || ARCH_S5P64X0 || ARCH_S3C64XX
select DMADEVICES select DMADEVICES
select PL330_DMA if (ARCH_EXYNOS5 || ARCH_EXYNOS4 || CPU_S5PV210 || CPU_S5PC100 || \ default y
CPU_S5P6450 || CPU_S5P6440)
help help
Use DMA device engine for PL330 DMAC. Use DMA device engine for PL330 DMAC.
endif
config S5P_DEV_MFC config S5P_DEV_MFC
bool bool
help help
...@@ -503,4 +490,5 @@ config DEBUG_S3C_UART ...@@ -503,4 +490,5 @@ config DEBUG_S3C_UART
default "2" if DEBUG_S3C_UART2 default "2" if DEBUG_S3C_UART2
default "3" if DEBUG_S3C_UART3 default "3" if DEBUG_S3C_UART3
endmenu
endif endif
...@@ -45,7 +45,7 @@ config OMAP_INTERCONNECT ...@@ -45,7 +45,7 @@ config OMAP_INTERCONNECT
config ARM_CCI config ARM_CCI
bool "ARM CCI driver support" bool "ARM CCI driver support"
depends on ARM depends on ARM && OF && CPU_V7
help help
Driver supporting the CCI cache coherent interconnect for ARM Driver supporting the CCI cache coherent interconnect for ARM
platforms. platforms.
......
...@@ -199,7 +199,7 @@ static struct regmap *vexpress_syscfg_regmap_init(struct device *dev, ...@@ -199,7 +199,7 @@ static struct regmap *vexpress_syscfg_regmap_init(struct device *dev,
func = kzalloc(sizeof(*func) + sizeof(*func->template) * num, func = kzalloc(sizeof(*func) + sizeof(*func->template) * num,
GFP_KERNEL); GFP_KERNEL);
if (!func) if (!func)
return NULL; return ERR_PTR(-ENOMEM);
func->syscfg = syscfg; func->syscfg = syscfg;
func->num_templates = num; func->num_templates = num;
...@@ -231,9 +231,13 @@ static struct regmap *vexpress_syscfg_regmap_init(struct device *dev, ...@@ -231,9 +231,13 @@ static struct regmap *vexpress_syscfg_regmap_init(struct device *dev,
func->regmap = regmap_init(dev, NULL, func, func->regmap = regmap_init(dev, NULL, func,
&vexpress_syscfg_regmap_config); &vexpress_syscfg_regmap_config);
if (IS_ERR(func->regmap)) if (IS_ERR(func->regmap)) {
void *err = func->regmap;
kfree(func); kfree(func);
else return err;
}
list_add(&func->list, &syscfg->funcs); list_add(&func->list, &syscfg->funcs);
return func->regmap; return func->regmap;
......
...@@ -44,7 +44,7 @@ config STE_MODEM_RPROC ...@@ -44,7 +44,7 @@ config STE_MODEM_RPROC
config DA8XX_REMOTEPROC config DA8XX_REMOTEPROC
tristate "DA8xx/OMAP-L13x remoteproc support" tristate "DA8xx/OMAP-L13x remoteproc support"
depends on ARCH_DAVINCI_DA8XX depends on ARCH_DAVINCI_DA8XX
select CMA select CMA if MMU
select REMOTEPROC select REMOTEPROC
select RPMSG select RPMSG
help help
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment