net: dsa: bcm_sf2: Get rid of PHYLIB functions

Now that we have converted the bcm_sf2 driver to implement PHYLINK MAC
operations, we can remove the PHYLIB callbacks: adjust_link() and
fixed_link_update() which are no longer called by DSA.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/dsa/bcm_sf2.c

@@ -480,153 +480,6 @@ static u32 bcm_sf2_sw_get_phy_flags(struct dsa_switch *ds, int port)
 	return priv->hw_params.gphy_rev;
 }
 
-static void bcm_sf2_sw_adjust_link(struct dsa_switch *ds, int port,
-				   struct phy_device *phydev)
-{
-	struct bcm_sf2_priv *priv = bcm_sf2_to_priv(ds);
-	struct ethtool_eee *p = &priv->dev->ports[port].eee;
-	u32 id_mode_dis = 0, port_mode;
-	const char *str = NULL;
-	u32 reg, offset;
-
-	if (priv->type == BCM7445_DEVICE_ID)
-		offset = CORE_STS_OVERRIDE_GMIIP_PORT(port);
-	else
-		offset = CORE_STS_OVERRIDE_GMIIP2_PORT(port);
-
-	switch (phydev->interface) {
-	case PHY_INTERFACE_MODE_RGMII:
-		str = "RGMII (no delay)";
-		id_mode_dis = 1;
-	case PHY_INTERFACE_MODE_RGMII_TXID:
-		if (!str)
-			str = "RGMII (TX delay)";
-		port_mode = EXT_GPHY;
-		break;
-	case PHY_INTERFACE_MODE_MII:
-		str = "MII";
-		port_mode = EXT_EPHY;
-		break;
-	case PHY_INTERFACE_MODE_REVMII:
-		str = "Reverse MII";
-		port_mode = EXT_REVMII;
-		break;
-	default:
-		/* All other PHYs: internal and MoCA */
-		goto force_link;
-	}
-
-	/* If the link is down, just disable the interface to conserve power */
-	if (!phydev->link) {
-		reg = reg_readl(priv, REG_RGMII_CNTRL_P(port));
-		reg &= ~RGMII_MODE_EN;
-		reg_writel(priv, reg, REG_RGMII_CNTRL_P(port));
-		goto force_link;
-	}
-
-	/* Clear id_mode_dis bit, and the existing port mode, but
-	 * make sure we enable the RGMII block for data to pass
-	 */
-	reg = reg_readl(priv, REG_RGMII_CNTRL_P(port));
-	reg &= ~ID_MODE_DIS;
-	reg &= ~(PORT_MODE_MASK << PORT_MODE_SHIFT);
-	reg &= ~(RX_PAUSE_EN | TX_PAUSE_EN);
-
-	reg |= port_mode | RGMII_MODE_EN;
-	if (id_mode_dis)
-		reg |= ID_MODE_DIS;
-
-	if (phydev->pause) {
-		if (phydev->asym_pause)
-			reg |= TX_PAUSE_EN;
-		reg |= RX_PAUSE_EN;
-	}
-
-	reg_writel(priv, reg, REG_RGMII_CNTRL_P(port));
-
-	pr_info("Port %d configured for %s\n", port, str);
-
-force_link:
-	/* Force link settings detected from the PHY */
-	reg = SW_OVERRIDE;
-	switch (phydev->speed) {
-	case SPEED_1000:
-		reg |= SPDSTS_1000 << SPEED_SHIFT;
-		break;
-	case SPEED_100:
-		reg |= SPDSTS_100 << SPEED_SHIFT;
-		break;
-	}
-
-	if (phydev->link)
-		reg |= LINK_STS;
-	if (phydev->duplex == DUPLEX_FULL)
-		reg |= DUPLX_MODE;
-
-	core_writel(priv, reg, offset);
-
-	if (!phydev->is_pseudo_fixed_link)
-		p->eee_enabled = b53_eee_init(ds, port, phydev);
-}
-
-static void bcm_sf2_sw_fixed_link_update(struct dsa_switch *ds, int port,
-					 struct fixed_phy_status *status)
-{
-	struct bcm_sf2_priv *priv = bcm_sf2_to_priv(ds);
-	u32 duplex, pause, offset;
-	u32 reg;
-
-	if (priv->type == BCM7445_DEVICE_ID)
-		offset = CORE_STS_OVERRIDE_GMIIP_PORT(port);
-	else
-		offset = CORE_STS_OVERRIDE_GMIIP2_PORT(port);
-
-	duplex = core_readl(priv, CORE_DUPSTS);
-	pause = core_readl(priv, CORE_PAUSESTS);
-
-	status->link = 0;
-
-	/* MoCA port is special as we do not get link status from CORE_LNKSTS,
-	 * which means that we need to force the link at the port override
-	 * level to get the data to flow. We do use what the interrupt handler
-	 * did determine before.
-	 *
-	 * For the other ports, we just force the link status, since this is
-	 * a fixed PHY device.
-	 */
-	if (port == priv->moca_port) {
-		status->link = priv->port_sts[port].link;
-		/* For MoCA interfaces, also force a link down notification
-		 * since some version of the user-space daemon (mocad) use
-		 * cmd->autoneg to force the link, which messes up the PHY
-		 * state machine and make it go in PHY_FORCING state instead.
-		 */
-		if (!status->link)
-			netif_carrier_off(ds->ports[port].slave);
-		status->duplex = 1;
-	} else {
-		status->link = 1;
-		status->duplex = !!(duplex & (1 << port));
-	}
-
-	reg = core_readl(priv, offset);
-	reg |= SW_OVERRIDE;
-	if (status->link)
-		reg |= LINK_STS;
-	else
-		reg &= ~LINK_STS;
-	core_writel(priv, reg, offset);
-
-	if ((pause & (1 << port)) &&
-	    (pause & (1 << (port + PAUSESTS_TX_PAUSE_SHIFT)))) {
-		status->asym_pause = 1;
-		status->pause = 1;
-	}
-
-	if (pause & (1 << port))
-		status->pause = 1;
-}
-
 static void bcm_sf2_sw_validate(struct dsa_switch *ds, int port,
 				unsigned long *supported,
 				struct phylink_link_state *state)
@@ -1054,8 +907,6 @@ static const struct dsa_switch_ops bcm_sf2_ops = {
 	.get_sset_count		= b53_get_sset_count,
 	.get_ethtool_phy_stats	= b53_get_ethtool_phy_stats,
 	.get_phy_flags		= bcm_sf2_sw_get_phy_flags,
-	.adjust_link		= bcm_sf2_sw_adjust_link,
-	.fixed_link_update	= bcm_sf2_sw_fixed_link_update,
 	.phylink_validate	= bcm_sf2_sw_validate,
 	.phylink_mac_config	= bcm_sf2_sw_mac_config,
 	.phylink_mac_link_down	= bcm_sf2_sw_mac_link_down,