Merge branch 'be2net-next'

Sathya Perla says:

====================
be2net: patch set

Patch 1 fixes a regression caused by a previous commit on net-next.
Old versions of BE3 FW may not support cmds to re-provision (and hence
optimize) resources/queues in SR-IOV config. Do not treat this FW cmd
failure as fatal and fail the function initialization. Instead, just
enable SR-IOV with the resources provided by the FW.

Patch 2 ignores a VF mac address setting if the new mac is already active
on the VF.

Patch 3 adds support to delete a FW-dump via ethtool on Lancer adapters.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/emulex/benet/be.h

@@ -383,8 +383,10 @@ enum vf_state {
 
 #define BE_UC_PMAC_COUNT			30
 #define BE_VF_UC_PMAC_COUNT			2
+
 /* Ethtool set_dump flags */
 #define LANCER_INITIATE_FW_DUMP			0x1
+#define LANCER_DELETE_FW_DUMP			0x2
 
 struct phy_info {
 	u8 transceiver;

drivers/net/ethernet/emulex/benet/be_cmds.c

@@ -2240,6 +2240,34 @@ int lancer_cmd_write_object(struct be_adapter *adapter, struct be_dma_mem *cmd,
 	return status;
 }
 
+int lancer_cmd_delete_object(struct be_adapter *adapter, const char *obj_name)
+{
+	struct lancer_cmd_req_delete_object *req;
+	struct be_mcc_wrb *wrb;
+	int status;
+
+	spin_lock_bh(&adapter->mcc_lock);
+
+	wrb = wrb_from_mccq(adapter);
+	if (!wrb) {
+		status = -EBUSY;
+		goto err;
+	}
+
+	req = embedded_payload(wrb);
+
+	be_wrb_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON,
+			       OPCODE_COMMON_DELETE_OBJECT,
+			       sizeof(*req), wrb, NULL);
+
+	strcpy(req->object_name, obj_name);
+
+	status = be_mcc_notify_wait(adapter);
+err:
+	spin_unlock_bh(&adapter->mcc_lock);
+	return status;
+}
+
 int lancer_cmd_read_object(struct be_adapter *adapter, struct be_dma_mem *cmd,
 			   u32 data_size, u32 data_offset, const char *obj_name,
 			   u32 *data_read, u32 *eof, u8 *addn_status)
@@ -3805,13 +3833,19 @@ bool dump_present(struct be_adapter *adapter)
 
 int lancer_initiate_dump(struct be_adapter *adapter)
 {
+	struct device *dev = &adapter->pdev->dev;
 	int status;
 
+	if (dump_present(adapter)) {
+		dev_info(dev, "Previous dump not cleared, not forcing dump\n");
+		return -EEXIST;
+	}
+
 	/* give firmware reset and diagnostic dump */
 	status = lancer_physdev_ctrl(adapter, PHYSDEV_CONTROL_FW_RESET_MASK |
 				     PHYSDEV_CONTROL_DD_MASK);
 	if (status < 0) {
-		dev_err(&adapter->pdev->dev, "Firmware reset failed\n");
+		dev_err(dev, "FW reset failed\n");
 		return status;
 	}
 
@@ -3820,13 +3854,21 @@ int lancer_initiate_dump(struct be_adapter *adapter)
 		return status;
 
 	if (!dump_present(adapter)) {
-		dev_err(&adapter->pdev->dev, "Dump image not present\n");
-		return -1;
+		dev_err(dev, "FW dump not generated\n");
+		return -EIO;
 	}
 
 	return 0;
 }
 
+int lancer_delete_dump(struct be_adapter *adapter)
+{
+	int status;
+
+	status = lancer_cmd_delete_object(adapter, LANCER_FW_DUMP_FILE);
+	return be_cmd_status(status);
+}
+
 /* Uses sync mcc */
 int be_cmd_enable_vf(struct be_adapter *adapter, u8 domain)
 {

drivers/net/ethernet/emulex/benet/be_cmds.h

@@ -231,6 +231,7 @@ struct be_mcc_mailbox {
 #define OPCODE_COMMON_GET_FN_PRIVILEGES			170
 #define OPCODE_COMMON_READ_OBJECT			171
 #define OPCODE_COMMON_WRITE_OBJECT			172
+#define OPCODE_COMMON_DELETE_OBJECT			174
 #define OPCODE_COMMON_MANAGE_IFACE_FILTERS		193
 #define OPCODE_COMMON_GET_IFACE_LIST			194
 #define OPCODE_COMMON_ENABLE_DISABLE_VF			196
@@ -1253,6 +1254,13 @@ struct lancer_cmd_resp_read_object {
 	u32 eof;
 };
 
+struct lancer_cmd_req_delete_object {
+	struct be_cmd_req_hdr hdr;
+	u32 rsvd1;
+	u32 rsvd2;
+	u8 object_name[104];
+};
+
 /************************ WOL *******************************/
 struct be_cmd_req_acpi_wol_magic_config{
 	struct be_cmd_req_hdr hdr;
@@ -2067,6 +2075,7 @@ int lancer_cmd_write_object(struct be_adapter *adapter, struct be_dma_mem *cmd,
 int lancer_cmd_read_object(struct be_adapter *adapter, struct be_dma_mem *cmd,
 			   u32 data_size, u32 data_offset, const char *obj_name,
 			   u32 *data_read, u32 *eof, u8 *addn_status);
+int lancer_cmd_delete_object(struct be_adapter *adapter, const char *obj_name);
 int be_cmd_get_flash_crc(struct be_adapter *adapter, u8 *flashed_crc,
 			  u16 optype, int offset);
 int be_cmd_enable_magic_wol(struct be_adapter *adapter, u8 *mac,
@@ -2120,6 +2129,7 @@ int be_cmd_set_ext_fat_capabilites(struct be_adapter *adapter,
 				   struct be_fat_conf_params *cfgs);
 int lancer_physdev_ctrl(struct be_adapter *adapter, u32 mask);
 int lancer_initiate_dump(struct be_adapter *adapter);
+int lancer_delete_dump(struct be_adapter *adapter);
 bool dump_present(struct be_adapter *adapter);
 int lancer_test_and_set_rdy_state(struct be_adapter *adapter);
 int be_cmd_query_port_name(struct be_adapter *adapter, u8 *port_name);

drivers/net/ethernet/emulex/benet/be_ethtool.c

@@ -681,21 +681,20 @@ static int be_set_dump(struct net_device *netdev, struct ethtool_dump *dump)
 	struct device *dev = &adapter->pdev->dev;
 	int status;
 
-	if (!lancer_chip(adapter)) {
-		dev_err(dev, "FW dump not supported\n");
+	if (!lancer_chip(adapter) ||
+	    !check_privilege(adapter, MAX_PRIVILEGES))
 		return -EOPNOTSUPP;
-	}
-
-	if (dump_present(adapter)) {
-		dev_err(dev, "Previous dump not cleared, not forcing dump\n");
-		return 0;
-	}
 
 	switch (dump->flag) {
 	case LANCER_INITIATE_FW_DUMP:
 		status = lancer_initiate_dump(adapter);
 		if (!status)
-			dev_info(dev, "F/w dump initiated successfully\n");
+			dev_info(dev, "FW dump initiated successfully\n");
+		break;
+	case LANCER_DELETE_FW_DUMP:
+		status = lancer_delete_dump(adapter);
+		if (!status)
+			dev_info(dev, "FW dump deleted successfully\n");
 	break;
 	default:
 		dev_err(dev, "Invalid dump level: 0x%x\n", dump->flag);

drivers/net/ethernet/emulex/benet/be_main.c

@@ -1270,6 +1270,12 @@ static int be_set_vf_mac(struct net_device *netdev, int vf, u8 *mac)
 	if (!is_valid_ether_addr(mac) || vf >= adapter->num_vfs)
 		return -EINVAL;
 
+	/* Proceed further only if user provided MAC is different
+	 * from active MAC
+	 */
+	if (ether_addr_equal(mac, vf_cfg->mac_addr))
+		return 0;
+
 	if (BEx_chip(adapter)) {
 		be_cmd_pmac_del(adapter, vf_cfg->if_handle, vf_cfg->pmac_id,
 				vf + 1);
@@ -3342,22 +3348,17 @@ static int be_get_sriov_config(struct be_adapter *adapter)
 {
 	struct device *dev = &adapter->pdev->dev;
 	struct be_resources res = {0};
-	int status, max_vfs, old_vfs;
-
-	status = be_cmd_get_profile_config(adapter, &res, 0);
-	if (status)
-		return status;
-
-	adapter->pool_res = res;
+	int max_vfs, old_vfs;
 
 	/* Some old versions of BE3 FW don't report max_vfs value */
+	be_cmd_get_profile_config(adapter, &res, 0);
+
 	if (BE3_chip(adapter) && !res.max_vfs) {
 		max_vfs = pci_sriov_get_totalvfs(adapter->pdev);
 		res.max_vfs = max_vfs > 0 ? min(MAX_VFS, max_vfs) : 0;
 	}
 
-	adapter->pool_res.max_vfs = res.max_vfs;
-	pci_sriov_set_totalvfs(adapter->pdev, be_max_vfs(adapter));
+	adapter->pool_res = res;
 
 	if (!be_max_vfs(adapter)) {
 		if (num_vfs)
@@ -3366,6 +3367,8 @@ static int be_get_sriov_config(struct be_adapter *adapter)
 		return 0;
 	}
 
+	pci_sriov_set_totalvfs(adapter->pdev, be_max_vfs(adapter));
+
 	/* validate num_vfs module param */
 	old_vfs = pci_num_vf(adapter->pdev);
 	if (old_vfs) {
@@ -3423,26 +3426,17 @@ static int be_get_resources(struct be_adapter *adapter)
 	return 0;
 }
 
-static int be_get_config(struct be_adapter *adapter)
+static void be_sriov_config(struct be_adapter *adapter)
 {
-	u16 profile_id;
+	struct device *dev = &adapter->pdev->dev;
 	int status;
 
-	status = be_cmd_query_fw_cfg(adapter);
-	if (status)
-		return status;
-
-	 if (be_physfn(adapter)) {
-		status = be_cmd_get_active_profile(adapter, &profile_id);
-		if (!status)
-			dev_info(&adapter->pdev->dev,
-				 "Using profile 0x%x\n", profile_id);
-	}
-
-	if (!BE2_chip(adapter) && be_physfn(adapter)) {
 	status = be_get_sriov_config(adapter);
-		if (status)
-			return status;
+	if (status) {
+		dev_err(dev, "Failed to query SR-IOV configuration\n");
+		dev_err(dev, "SR-IOV cannot be enabled\n");
+		return;
+	}
 
 	/* When the HW is in SRIOV capable configuration, the PF-pool
 	 * resources are equally distributed across the max-number of
@@ -3452,15 +3446,34 @@ static int be_get_config(struct be_adapter *adapter)
 	 * resources. This facility is not available in BE3 FW.
 	 * Also, this is done by FW in Lancer chip.
 	 */
-		if (!pci_num_vf(adapter->pdev)) {
+	if (be_max_vfs(adapter) && !pci_num_vf(adapter->pdev)) {
 		status = be_cmd_set_sriov_config(adapter,
 						 adapter->pool_res,
 						 adapter->num_vfs);
 		if (status)
-				return status;
+			dev_err(dev, "Failed to optimize SR-IOV resources\n");
 	}
+}
+
+static int be_get_config(struct be_adapter *adapter)
+{
+	u16 profile_id;
+	int status;
+
+	status = be_cmd_query_fw_cfg(adapter);
+	if (status)
+		return status;
+
+	 if (be_physfn(adapter)) {
+		status = be_cmd_get_active_profile(adapter, &profile_id);
+		if (!status)
+			dev_info(&adapter->pdev->dev,
+				 "Using profile 0x%x\n", profile_id);
 	}
 
+	if (!BE2_chip(adapter) && be_physfn(adapter))
+		be_sriov_config(adapter);
+
 	status = be_get_resources(adapter);
 	if (status)
 		return status;