net: qmi_wwan: Add pass through mode

Pass through mode is to allow packets in MAP format to be passed
on to the stack. rmnet driver can be used to process and demultiplex
these packets.

Pass through mode can be enabled when the device is in raw ip mode only.
Conversely, raw ip mode cannot be disabled when pass through mode is
enabled.

Userspace can use pass through mode in conjunction with rmnet driver
through the following steps-

1. Enable raw ip mode on qmi_wwan device
2. Enable pass through mode on qmi_wwan device
3. Create a rmnet device with qmi_wwan device as real device using netlink
Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>
Acked-by: Bjørn Mork <bjorn@mork.no>
Link: https://lore.kernel.org/r/1611560015-20034-1-git-send-email-subashab@codeaurora.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

drivers/net/usb/qmi_wwan.c

@@ -57,6 +57,7 @@ struct qmi_wwan_state {
 enum qmi_wwan_flags {
 	QMI_WWAN_FLAG_RAWIP = 1 << 0,
 	QMI_WWAN_FLAG_MUX = 1 << 1,
+	QMI_WWAN_FLAG_PASS_THROUGH = 1 << 2,
 };
 
 enum qmi_wwan_quirks {
@@ -350,6 +351,13 @@ static ssize_t raw_ip_store(struct device *d,  struct device_attribute *attr, co
 	if (enable == (info->flags & QMI_WWAN_FLAG_RAWIP))
 		return len;
 
+	/* ip mode cannot be cleared when pass through mode is set */
+	if (!enable && (info->flags & QMI_WWAN_FLAG_PASS_THROUGH)) {
+		netdev_err(dev->net,
+			   "Cannot clear ip mode on pass through device\n");
+		return -EINVAL;
+	}
+
 	if (!rtnl_trylock())
 		return restart_syscall();
 
@@ -480,14 +488,59 @@ static ssize_t del_mux_store(struct device *d,  struct device_attribute *attr, c
 	return ret;
 }
 
+static ssize_t pass_through_show(struct device *d,
+				 struct device_attribute *attr, char *buf)
+{
+	struct usbnet *dev = netdev_priv(to_net_dev(d));
+	struct qmi_wwan_state *info;
+
+	info = (void *)&dev->data;
+	return sprintf(buf, "%c\n",
+		       info->flags & QMI_WWAN_FLAG_PASS_THROUGH ? 'Y' : 'N');
+}
+
+static ssize_t pass_through_store(struct device *d,
+				  struct device_attribute *attr,
+				  const char *buf, size_t len)
+{
+	struct usbnet *dev = netdev_priv(to_net_dev(d));
+	struct qmi_wwan_state *info;
+	bool enable;
+
+	if (strtobool(buf, &enable))
+		return -EINVAL;
+
+	info = (void *)&dev->data;
+
+	/* no change? */
+	if (enable == (info->flags & QMI_WWAN_FLAG_PASS_THROUGH))
+		return len;
+
+	/* pass through mode can be set for raw ip devices only */
+	if (!(info->flags & QMI_WWAN_FLAG_RAWIP)) {
+		netdev_err(dev->net,
+			   "Cannot set pass through mode on non ip device\n");
+		return -EINVAL;
+	}
+
+	if (enable)
+		info->flags |= QMI_WWAN_FLAG_PASS_THROUGH;
+	else
+		info->flags &= ~QMI_WWAN_FLAG_PASS_THROUGH;
+
+	return len;
+}
+
 static DEVICE_ATTR_RW(raw_ip);
 static DEVICE_ATTR_RW(add_mux);
 static DEVICE_ATTR_RW(del_mux);
+static DEVICE_ATTR_RW(pass_through);
 
 static struct attribute *qmi_wwan_sysfs_attrs[] = {
 	&dev_attr_raw_ip.attr,
 	&dev_attr_add_mux.attr,
 	&dev_attr_del_mux.attr,
+	&dev_attr_pass_through.attr,
 	NULL,
 };
 
@@ -534,6 +587,11 @@ static int qmi_wwan_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
 	if (info->flags & QMI_WWAN_FLAG_MUX)
 		return qmimux_rx_fixup(dev, skb);
 
+	if (info->flags & QMI_WWAN_FLAG_PASS_THROUGH) {
+		skb->protocol = htons(ETH_P_MAP);
+		return (netif_rx(skb) == NET_RX_SUCCESS);
+	}
+
 	switch (skb->data[0] & 0xf0) {
 	case 0x40:
 		proto = htons(ETH_P_IP);