ARM: dts: imx: Fix SPI bus warnings

dtc has new checks for SPI buses. Fix the warnings in node names and
unit-addresses.

There's over 100 warnings for FSL boards, a few examples:

arch/arm/boot/dts/imx28-duckbill-2-spi.dtb: Warning (spi_bus_bridge): /apb@80000000/apbh@80000000/ssp@80014000: node name for SPI buses should be 'spi'
arch/arm/boot/dts/imx53-ppd.dtb: Warning (spi_bus_bridge): /soc/aips@50000000/spba@50000000/ecspi@50010000: node name for SPI buses should be 'spi'
arch/arm/boot/dts/imx6dl-colibri-eval-v3.dtb: Warning (spi_bus_reg): /soc/aips-bus@2000000/spba-bus@2000000/spi@2014000/mcp251x@1: SPI bus unit address format error, expected "0"

Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: NXP Linux Team <linux-imx@nxp.com>
Cc: Li Yang <leoyang.li@nxp.com>
Cc: Stefan Agner <stefan@agner.ch>
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Acked-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

arch/arm/boot/dts/imx1.dtsi

@@ -164,7 +164,7 @@ aipi@210000 {
 			reg = <0x00210000 0x10000>;
 			ranges;
 
-			cspi1: cspi@213000 {
+			cspi1: spi@213000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				compatible = "fsl,imx1-cspi";
@@ -186,7 +186,7 @@ i2c: i2c@217000 {
 				status = "disabled";
 			};
 
-			cspi2: cspi@219000 {
+			cspi2: spi@219000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				compatible = "fsl,imx1-cspi";

arch/arm/boot/dts/imx23-evk.dts

@@ -58,7 +58,7 @@ gpmi-nand@8000c000 {
 				status = "okay";
 			};
 
-			ssp0: ssp@80010000 {
+			ssp0: spi@80010000 {
 				compatible = "fsl,imx23-mmc";
 				pinctrl-names = "default";
 				pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_pins_fixup>;

arch/arm/boot/dts/imx23-olinuxino.dts

@@ -25,7 +25,7 @@ memory@40000000 {
 
 	apb@80000000 {
 		apbh@80000000 {
-			ssp0: ssp@80010000 {
+			ssp0: spi@80010000 {
 				compatible = "fsl,imx23-mmc";
 				pinctrl-names = "default";
 				pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_pins_fixup>;
@@ -59,7 +59,7 @@ MX23_PAD_SSP1_DETECT__GPIO_2_1
 				};
 			};
 
-			ssp1: ssp@80034000 {
+			ssp1: spi@80034000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				compatible = "fsl,imx23-spi";

arch/arm/boot/dts/imx23-sansa.dts

@@ -55,7 +55,7 @@ memory@40000000 {
 
 	apb@80000000 {
 		apbh@80000000 {
-			ssp0: ssp@80010000 {
+			ssp0: spi@80010000 {
 				compatible = "fsl,imx23-mmc";
 				pinctrl-names = "default";
 				pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_pins_fixup>;
@@ -65,7 +65,7 @@ ssp0: ssp@80010000 {
 				status = "okay";
 			};
 
-			ssp1: ssp@80034000 {
+			ssp1: spi@80034000 {
 				compatible = "fsl,imx23-mmc";
 				pinctrl-names = "default";
 				pinctrl-0 = <&mmc1_8bit_pins_a>;

arch/arm/boot/dts/imx23-stmp378x_devb.dts

@@ -22,7 +22,7 @@ memory@40000000 {
 
 	apb@80000000 {
 		apbh@80000000 {
-			ssp0: ssp@80010000 {
+			ssp0: spi@80010000 {
 				compatible = "fsl,imx23-mmc";
 				pinctrl-names = "default";
 				pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_pins_fixup>;

arch/arm/boot/dts/imx23-xfi3.dts

@@ -54,7 +54,7 @@ memory@40000000 {
 
 	apb@80000000 {
 		apbh@80000000 {
-			ssp0: ssp@80010000 {
+			ssp0: spi@80010000 {
 				compatible = "fsl,imx23-mmc";
 				pinctrl-names = "default";
 				pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_pins_fixup>;
@@ -64,7 +64,7 @@ ssp0: ssp@80010000 {
 				status = "okay";
 			};
 
-			ssp1: ssp@80034000 {
+			ssp1: spi@80034000 {
 				compatible = "fsl,imx23-mmc";
 				pinctrl-names = "default";
 				pinctrl-0 = <&mmc1_4bit_pins_a>;

arch/arm/boot/dts/imx23.dtsi

@@ -93,7 +93,7 @@ gpmi-nand@8000c000 {
 				status = "disabled";
 			};
 
-			ssp0: ssp@80010000 {
+			ssp0: spi@80010000 {
 				reg = <0x80010000 0x2000>;
 				interrupts = <15>;
 				clocks = <&clks 33>;
@@ -457,7 +457,7 @@ lcdif@80030000 {
 				status = "disabled";
 			};
 
-			ssp1: ssp@80034000 {
+			ssp1: spi@80034000 {
 				reg = <0x80034000 0x2000>;
 				interrupts = <2>;
 				clocks = <&clks 33>;

arch/arm/boot/dts/imx25.dtsi

@@ -168,7 +168,7 @@ owire@43f9c000 {
 				status = "disabled";
 			};
 
-			spi1: cspi@43fa4000 {
+			spi1: spi@43fa4000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				compatible = "fsl,imx25-cspi", "fsl,imx35-cspi";
@@ -209,7 +209,7 @@ spba@50000000 {
 			reg = <0x50000000 0x40000>;
 			ranges;
 
-			spi3: cspi@50004000 {
+			spi3: spi@50004000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				compatible = "fsl,imx25-cspi", "fsl,imx35-cspi";
@@ -238,7 +238,7 @@ uart3: serial@5000c000 {
 				status = "disabled";
 			};
 
-			spi2: cspi@50010000 {
+			spi2: spi@50010000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				compatible = "fsl,imx25-cspi", "fsl,imx35-cspi";

arch/arm/boot/dts/imx27.dtsi

@@ -209,7 +209,7 @@ uart4: serial@1000d000 {
 				status = "disabled";
 			};
 
-			cspi1: cspi@1000e000 {
+			cspi1: spi@1000e000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				compatible = "fsl,imx27-cspi";
@@ -221,7 +221,7 @@ cspi1: cspi@1000e000 {
 				status = "disabled";
 			};
 
-			cspi2: cspi@1000f000 {
+			cspi2: spi@1000f000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				compatible = "fsl,imx27-cspi";
@@ -373,7 +373,7 @@ audmux: audmux@10016000 {
 				status = "disabled";
 			};
 
-			cspi3: cspi@10017000 {
+			cspi3: spi@10017000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				compatible = "fsl,imx27-cspi";

arch/arm/boot/dts/imx28-apf28dev.dts

@@ -18,7 +18,7 @@ / {
 
 	apb@80000000 {
 		apbh@80000000 {
-			ssp0: ssp@80010000 {
+			ssp0: spi@80010000 {
 				compatible = "fsl,imx28-mmc";
 				pinctrl-names = "default";
 				pinctrl-0 = <&mmc0_4bit_pins_a
@@ -27,7 +27,7 @@ ssp0: ssp@80010000 {
 				status = "okay";
 			};
 
-			ssp2: ssp@80014000 {
+			ssp2: spi@80014000 {
 				compatible = "fsl,imx28-spi";
 				pinctrl-names = "default";
 				pinctrl-0 = <&spi2_pins_a>;

arch/arm/boot/dts/imx28-apx4devkit.dts

@@ -18,7 +18,7 @@ gpmi-nand@8000c000 {
 				status = "okay";
 			};
 
-			ssp0: ssp@80010000 {
+			ssp0: spi@80010000 {
 				compatible = "fsl,imx28-mmc";
 				pinctrl-names = "default";
 				pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_sck_cfg>;
@@ -26,7 +26,7 @@ ssp0: ssp@80010000 {
 				status = "okay";
 			};
 
-			ssp2: ssp@80014000 {
+			ssp2: spi@80014000 {
 				compatible = "fsl,imx28-mmc";
 				pinctrl-names = "default";
 				pinctrl-0 = <&mmc2_4bit_pins_apx4 &mmc2_sck_cfg_apx4>;

arch/arm/boot/dts/imx28-cfa10036.dts

@@ -66,7 +66,7 @@ MX28_PAD_PWM3__GPIO_3_28 */
 
 			};
 
-			ssp0: ssp@80010000 {
+			ssp0: spi@80010000 {
 				compatible = "fsl,imx28-mmc";
 				pinctrl-names = "default";
 				pinctrl-0 = <&mmc0_4bit_pins_a

arch/arm/boot/dts/imx28-duckbill-2-485.dts

@@ -25,7 +25,7 @@ memory@40000000 {
 
 	apb@80000000 {
 		apbh@80000000 {
-			ssp0: ssp@80010000 {
+			ssp0: spi@80010000 {
 				compatible = "fsl,imx28-mmc";
 				pinctrl-names = "default";
 				pinctrl-0 = <&mmc0_8bit_pins_a
@@ -36,7 +36,7 @@ ssp0: ssp@80010000 {
 				non-removable;
 			};
 
-			ssp2: ssp@80014000 {
+			ssp2: spi@80014000 {
 				compatible = "fsl,imx28-mmc";
 				pinctrl-names = "default";
 				pinctrl-0 = <&mmc2_4bit_pins_b

arch/arm/boot/dts/imx28-duckbill-2-enocean.dts

@@ -26,7 +26,7 @@ memory@40000000 {
 
 	apb@80000000 {
 		apbh@80000000 {
-			ssp0: ssp@80010000 {
+			ssp0: spi@80010000 {
 				compatible = "fsl,imx28-mmc";
 				pinctrl-names = "default";
 				pinctrl-0 = <&mmc0_8bit_pins_a
@@ -37,7 +37,7 @@ ssp0: ssp@80010000 {
 				non-removable;
 			};
 
-			ssp2: ssp@80014000 {
+			ssp2: spi@80014000 {
 				compatible = "fsl,imx28-mmc";
 				pinctrl-names = "default";
 				pinctrl-0 = <&mmc2_4bit_pins_b

arch/arm/boot/dts/imx28-duckbill-2-spi.dts

@@ -29,7 +29,7 @@ memory@40000000 {
 
 	apb@80000000 {
 		apbh@80000000 {
-			ssp0: ssp@80010000 {
+			ssp0: spi@80010000 {
 				compatible = "fsl,imx28-mmc";
 				pinctrl-names = "default";
 				pinctrl-0 = <&mmc0_8bit_pins_a
@@ -40,7 +40,7 @@ ssp0: ssp@80010000 {
 				non-removable;
 			};
 
-			ssp2: ssp@80014000 {
+			ssp2: spi@80014000 {
 				compatible = "fsl,imx28-spi";
 				pinctrl-names = "default";
 				pinctrl-0 = <&spi2_pins_a>;

arch/arm/boot/dts/imx28-duckbill-2.dts

@@ -25,7 +25,7 @@ memory@40000000 {
 
 	apb@80000000 {
 		apbh@80000000 {
-			ssp0: ssp@80010000 {
+			ssp0: spi@80010000 {
 				compatible = "fsl,imx28-mmc";
 				pinctrl-names = "default";
 				pinctrl-0 = <&mmc0_8bit_pins_a
@@ -36,7 +36,7 @@ ssp0: ssp@80010000 {
 				non-removable;
 			};
 
-			ssp2: ssp@80014000 {
+			ssp2: spi@80014000 {
 				compatible = "fsl,imx28-mmc";
 				pinctrl-names = "default";
 				pinctrl-0 = <&mmc2_4bit_pins_b

arch/arm/boot/dts/imx28-duckbill.dts

@@ -24,7 +24,7 @@ memory@40000000 {
 
 	apb@80000000 {
 		apbh@80000000 {
-			ssp0: ssp@80010000 {
+			ssp0: spi@80010000 {
 				compatible = "fsl,imx28-mmc";
 				pinctrl-names = "default";
 				pinctrl-0 = <&mmc0_4bit_pins_a
@@ -34,7 +34,7 @@ ssp0: ssp@80010000 {
 				status = "okay";
 			};
 
-			ssp2: ssp@80014000 {
+			ssp2: spi@80014000 {
 				compatible = "fsl,imx28-spi";
 				pinctrl-names = "default";
 				pinctrl-0 = <&spi2_pins_a>;

arch/arm/boot/dts/imx28-evk.dts

@@ -103,7 +103,7 @@ gpmi-nand@8000c000 {
 				status = "okay";
 			};
 
-			ssp0: ssp@80010000 {
+			ssp0: spi@80010000 {
 				compatible = "fsl,imx28-mmc";
 				pinctrl-names = "default";
 				pinctrl-0 = <&mmc0_8bit_pins_a
@@ -114,13 +114,13 @@ ssp0: ssp@80010000 {
 				status = "okay";
 			};
 
-			ssp1: ssp@80012000 {
+			ssp1: spi@80012000 {
 				compatible = "fsl,imx28-mmc";
 				bus-width = <8>;
 				wp-gpios = <&gpio0 28 0>;
 			};
 
-			ssp2: ssp@80014000 {
+			ssp2: spi@80014000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				compatible = "fsl,imx28-spi";

arch/arm/boot/dts/imx28-m28cu3.dts

@@ -41,7 +41,7 @@ partition@1 {
 				};
 			};
 
-			ssp0: ssp@80010000 {
+			ssp0: spi@80010000 {
 				compatible = "fsl,imx28-mmc";
 				pinctrl-names = "default";
 				pinctrl-0 = <&mmc0_4bit_pins_a
@@ -52,7 +52,7 @@ &mmc0_cd_cfg
 				status = "okay";
 			};
 
-			ssp2: ssp@80014000 {
+			ssp2: spi@80014000 {
 				compatible = "fsl,imx28-mmc";
 				pinctrl-names = "default";
 				pinctrl-0 = <&mmc2_4bit_pins_a

arch/arm/boot/dts/imx28-m28evk.dts

@@ -18,7 +18,7 @@ / {
 
 	apb@80000000 {
 		apbh@80000000 {
-			ssp0: ssp@80010000 {
+			ssp0: spi@80010000 {
 				compatible = "fsl,imx28-mmc";
 				pinctrl-names = "default";
 				pinctrl-0 = <&mmc0_8bit_pins_a
@@ -30,7 +30,7 @@ &mmc0_cd_cfg
 				status = "okay";
 			};
 
-			ssp2: ssp@80014000 {
+			ssp2: spi@80014000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				compatible = "fsl,imx28-spi";

arch/arm/boot/dts/imx28-sps1.dts

@@ -40,7 +40,7 @@ MX28_PAD_GPMI_D06__GPIO_0_6
 
 			};
 
-			ssp0: ssp@80010000 {
+			ssp0: spi@80010000 {
 				compatible = "fsl,imx28-mmc";
 				pinctrl-names = "default";
 				pinctrl-0 = <&mmc0_4bit_pins_a>;
@@ -48,7 +48,7 @@ ssp0: ssp@80010000 {
 				status = "okay";
 			};
 
-			ssp2: ssp@80014000 {
+			ssp2: spi@80014000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				compatible = "fsl,imx28-spi";

arch/arm/boot/dts/imx28-ts4600.dts

@@ -25,7 +25,7 @@ memory@40000000 {
 
 	apb@80000000 {
 		apbh@80000000 {
-			ssp0: ssp@80010000 {
+			ssp0: spi@80010000 {
 				compatible = "fsl,imx28-mmc";
 				pinctrl-names = "default";
 				pinctrl-0 = <&mmc0_4bit_pins_a

arch/arm/boot/dts/imx28.dtsi

@@ -117,7 +117,7 @@ gpmi: gpmi-nand@8000c000 {
 				status = "disabled";
 			};
 
-			ssp0: ssp@80010000 {
+			ssp0: spi@80010000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				reg = <0x80010000 0x2000>;
@@ -128,7 +128,7 @@ ssp0: ssp@80010000 {
 				status = "disabled";
 			};
 
-			ssp1: ssp@80012000 {
+			ssp1: spi@80012000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				reg = <0x80012000 0x2000>;
@@ -139,7 +139,7 @@ ssp1: ssp@80012000 {
 				status = "disabled";
 			};
 
-			ssp2: ssp@80014000 {
+			ssp2: spi@80014000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				reg = <0x80014000 0x2000>;
@@ -150,7 +150,7 @@ ssp2: ssp@80014000 {
 				status = "disabled";
 			};
 
-			ssp3: ssp@80016000 {
+			ssp3: spi@80016000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				reg = <0x80016000 0x2000>;

arch/arm/boot/dts/imx31.dtsi

@@ -206,7 +206,7 @@ uart3: serial@5000c000 {
 				status = "disabled";
 			};
 
-			spi2: cspi@50010000 {
+			spi2: spi@50010000 {
 				compatible = "fsl,imx31-cspi";
 				reg = <0x50010000 0x4000>;
 				interrupts = <13>;
@@ -241,7 +241,7 @@ clks: ccm@53f80000{
 				#clock-cells = <1>;
 			};
 
-			spi3: cspi@53f84000 {
+			spi3: spi@53f84000 {
 				compatible = "fsl,imx31-cspi";
 				reg = <0x53f84000 0x4000>;
 				interrupts = <17>;

arch/arm/boot/dts/imx35.dtsi

@@ -133,7 +133,7 @@ ssi1: ssi@43fa0000 {
 				status = "disabled";
 			};
 
-			spi1: cspi@43fa4000 {
+			spi1: spi@43fa4000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				compatible = "fsl,imx35-cspi";
@@ -174,7 +174,7 @@ uart3: serial@5000c000 {
 				status = "disabled";
 			};
 
-			spi2: cspi@50010000 {
+			spi2: spi@50010000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				compatible = "fsl,imx35-cspi";

arch/arm/boot/dts/imx50.dtsi

@@ -140,7 +140,7 @@ uart3: serial@5000c000 {
 					status = "disabled";
 				};
 
-				ecspi1: ecspi@50010000 {
+				ecspi1: spi@50010000 {
 					#address-cells = <1>;
 					#size-cells = <0>;
 					compatible = "fsl,imx50-ecspi", "fsl,imx51-ecspi";
@@ -403,7 +403,7 @@ owire: owire@63fa4000 {
 				status = "disabled";
 			};
 
-			ecspi2: ecspi@63fac000 {
+			ecspi2: spi@63fac000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				compatible = "fsl,imx50-ecspi", "fsl,imx51-ecspi";
@@ -426,7 +426,7 @@ sdma: sdma@63fb0000 {
 				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx50.bin";
 			};
 
-			cspi: cspi@63fc0000 {
+			cspi: spi@63fc0000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				compatible = "fsl,imx50-cspi", "fsl,imx35-cspi";

arch/arm/boot/dts/imx51.dtsi

@@ -197,7 +197,7 @@ uart3: serial@7000c000 {
 					status = "disabled";
 				};
 
-				ecspi1: ecspi@70010000 {
+				ecspi1: spi@70010000 {
 					#address-cells = <1>;
 					#size-cells = <0>;
 					compatible = "fsl,imx51-ecspi";
@@ -464,7 +464,7 @@ owire: owire@83fa4000 {
 				status = "disabled";
 			};
 
-			ecspi2: ecspi@83fac000 {
+			ecspi2: spi@83fac000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				compatible = "fsl,imx51-ecspi";
@@ -487,7 +487,7 @@ sdma: sdma@83fb0000 {
 				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx51.bin";
 			};
 
-			cspi: cspi@83fc0000 {
+			cspi: spi@83fc0000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				compatible = "fsl,imx51-cspi", "fsl,imx35-cspi";

arch/arm/boot/dts/imx53.dtsi

@@ -259,7 +259,7 @@ uart3: serial@5000c000 {
 					status = "disabled";
 				};
 
-				ecspi1: ecspi@50010000 {
+				ecspi1: spi@50010000 {
 					#address-cells = <1>;
 					#size-cells = <0>;
 					compatible = "fsl,imx53-ecspi", "fsl,imx51-ecspi";
@@ -684,7 +684,7 @@ owire: owire@63fa4000 {
 				status = "disabled";
 			};
 
-			ecspi2: ecspi@63fac000 {
+			ecspi2: spi@63fac000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				compatible = "fsl,imx53-ecspi", "fsl,imx51-ecspi";
@@ -707,7 +707,7 @@ sdma: sdma@63fb0000 {
 				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx53.bin";
 			};
 
-			cspi: cspi@63fc0000 {
+			cspi: spi@63fc0000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				compatible = "fsl,imx53-cspi", "fsl,imx35-cspi";

arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts

@@ -146,7 +146,7 @@ &backlight {
 &ecspi4 {
 	status = "okay";
 
-	mcp251x0: mcp251x@1 {
+	mcp251x0: mcp251x@0 {
 		compatible = "microchip,mcp2515";
 		reg = <0>;
 		clocks = <&clk16m>;

arch/arm/boot/dts/imx6q.dtsi

@@ -163,7 +163,7 @@ ocram: sram@900000 {
 
 		aips-bus@2000000 { /* AIPS1 */
 			spba-bus@2000000 {
-				ecspi5: ecspi@2018000 {
+				ecspi5: spi@2018000 {
 					#address-cells = <1>;
 					#size-cells = <0>;
 					compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";

arch/arm/boot/dts/imx6qdl.dtsi

@@ -317,7 +317,7 @@ spdif: spdif@2004000 {
 					status = "disabled";
 				};
 
-				ecspi1: ecspi@2008000 {
+				ecspi1: spi@2008000 {
 					#address-cells = <1>;
 					#size-cells = <0>;
 					compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
@@ -331,7 +331,7 @@ ecspi1: ecspi@2008000 {
 					status = "disabled";
 				};
 
-				ecspi2: ecspi@200c000 {
+				ecspi2: spi@200c000 {
 					#address-cells = <1>;
 					#size-cells = <0>;
 					compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
@@ -345,7 +345,7 @@ ecspi2: ecspi@200c000 {
 					status = "disabled";
 				};
 
-				ecspi3: ecspi@2010000 {
+				ecspi3: spi@2010000 {
 					#address-cells = <1>;
 					#size-cells = <0>;
 					compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
@@ -359,7 +359,7 @@ ecspi3: ecspi@2010000 {
 					status = "disabled";
 				};
 
-				ecspi4: ecspi@2014000 {
+				ecspi4: spi@2014000 {
 					#address-cells = <1>;
 					#size-cells = <0>;
 					compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";

arch/arm/boot/dts/imx6sl.dtsi

@@ -168,7 +168,7 @@ spdif: spdif@2004000 {
 					status = "disabled";
 				};
 
-				ecspi1: ecspi@2008000 {
+				ecspi1: spi@2008000 {
 					#address-cells = <1>;
 					#size-cells = <0>;
 					compatible = "fsl,imx6sl-ecspi", "fsl,imx51-ecspi";
@@ -180,7 +180,7 @@ ecspi1: ecspi@2008000 {
 					status = "disabled";
 				};
 
-				ecspi2: ecspi@200c000 {
+				ecspi2: spi@200c000 {
 					#address-cells = <1>;
 					#size-cells = <0>;
 					compatible = "fsl,imx6sl-ecspi", "fsl,imx51-ecspi";
@@ -192,7 +192,7 @@ ecspi2: ecspi@200c000 {
 					status = "disabled";
 				};
 
-				ecspi3: ecspi@2010000 {
+				ecspi3: spi@2010000 {
 					#address-cells = <1>;
 					#size-cells = <0>;
 					compatible = "fsl,imx6sl-ecspi", "fsl,imx51-ecspi";
@@ -204,7 +204,7 @@ ecspi3: ecspi@2010000 {
 					status = "disabled";
 				};
 
-				ecspi4: ecspi@2014000 {
+				ecspi4: spi@2014000 {
 					#address-cells = <1>;
 					#size-cells = <0>;
 					compatible = "fsl,imx6sl-ecspi", "fsl,imx51-ecspi";

arch/arm/boot/dts/imx6sx.dtsi

@@ -268,7 +268,7 @@ spdif: spdif@2004000 {
 					status = "disabled";
 				};
 
-				ecspi1: ecspi@2008000 {
+				ecspi1: spi@2008000 {
 					#address-cells = <1>;
 					#size-cells = <0>;
 					compatible = "fsl,imx6sx-ecspi", "fsl,imx51-ecspi";
@@ -280,7 +280,7 @@ ecspi1: ecspi@2008000 {
 					status = "disabled";
 				};
 
-				ecspi2: ecspi@200c000 {
+				ecspi2: spi@200c000 {
 					#address-cells = <1>;
 					#size-cells = <0>;
 					compatible = "fsl,imx6sx-ecspi", "fsl,imx51-ecspi";
@@ -292,7 +292,7 @@ ecspi2: ecspi@200c000 {
 					status = "disabled";
 				};
 
-				ecspi3: ecspi@2010000 {
+				ecspi3: spi@2010000 {
 					#address-cells = <1>;
 					#size-cells = <0>;
 					compatible = "fsl,imx6sx-ecspi", "fsl,imx51-ecspi";
@@ -304,7 +304,7 @@ ecspi3: ecspi@2010000 {
 					status = "disabled";
 				};
 
-				ecspi4: ecspi@2014000 {
+				ecspi4: spi@2014000 {
 					#address-cells = <1>;
 					#size-cells = <0>;
 					compatible = "fsl,imx6sx-ecspi", "fsl,imx51-ecspi";
@@ -1079,7 +1079,7 @@ sai2: sai@21dc000 {
 				status = "disabled";
 			};
 
-			qspi1: qspi@21e0000 {
+			qspi1: spi@21e0000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				compatible = "fsl,imx6sx-qspi";
@@ -1092,7 +1092,7 @@ qspi1: qspi@21e0000 {
 				status = "disabled";
 			};
 
-			qspi2: qspi@21e4000 {
+			qspi2: spi@21e4000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				compatible = "fsl,imx6sx-qspi";
@@ -1273,7 +1273,7 @@ wdog3: wdog@2288000 {
 				status = "disabled";
 			};
 
-			ecspi5: ecspi@228c000 {
+			ecspi5: spi@228c000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				compatible = "fsl,imx6sx-ecspi", "fsl,imx51-ecspi";

arch/arm/boot/dts/imx6ul.dtsi

@@ -217,7 +217,7 @@ spba-bus@2000000 {
 				reg = <0x02000000 0x40000>;
 				ranges;
 
-				ecspi1: ecspi@2008000 {
+				ecspi1: spi@2008000 {
 					#address-cells = <1>;
 					#size-cells = <0>;
 					compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
@@ -229,7 +229,7 @@ ecspi1: ecspi@2008000 {
 					status = "disabled";
 				};
 
-				ecspi2: ecspi@200c000 {
+				ecspi2: spi@200c000 {
 					#address-cells = <1>;
 					#size-cells = <0>;
 					compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
@@ -241,7 +241,7 @@ ecspi2: ecspi@200c000 {
 					status = "disabled";
 				};
 
-				ecspi3: ecspi@2010000 {
+				ecspi3: spi@2010000 {
 					#address-cells = <1>;
 					#size-cells = <0>;
 					compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
@@ -253,7 +253,7 @@ ecspi3: ecspi@2010000 {
 					status = "disabled";
 				};
 
-				ecspi4: ecspi@2014000 {
+				ecspi4: spi@2014000 {
 					#address-cells = <1>;
 					#size-cells = <0>;
 					compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
@@ -955,7 +955,7 @@ lcdif: lcdif@21c8000 {
 				status = "disabled";
 			};
 
-			qspi: qspi@21e0000 {
+			qspi: spi@21e0000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				compatible = "fsl,imx6ul-qspi", "fsl,imx6sx-qspi";

arch/arm/boot/dts/imx7s.dtsi

@@ -642,7 +642,7 @@ adc2: adc@30620000 {
 				status = "disabled";
 			};
 
-			ecspi4: ecspi@30630000 {
+			ecspi4: spi@30630000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				compatible = "fsl,imx7d-ecspi", "fsl,imx51-ecspi";
@@ -723,7 +723,7 @@ spba-bus@30800000 {
 				reg = <0x30800000 0x100000>;
 				ranges;
 
-				ecspi1: ecspi@30820000 {
+				ecspi1: spi@30820000 {
 					#address-cells = <1>;
 					#size-cells = <0>;
 					compatible = "fsl,imx7d-ecspi", "fsl,imx51-ecspi";
@@ -735,7 +735,7 @@ ecspi1: ecspi@30820000 {
 					status = "disabled";
 				};
 
-				ecspi2: ecspi@30830000 {
+				ecspi2: spi@30830000 {
 					#address-cells = <1>;
 					#size-cells = <0>;
 					compatible = "fsl,imx7d-ecspi", "fsl,imx51-ecspi";
@@ -747,7 +747,7 @@ ecspi2: ecspi@30830000 {
 					status = "disabled";
 				};
 
-				ecspi3: ecspi@30840000 {
+				ecspi3: spi@30840000 {
 					#address-cells = <1>;
 					#size-cells = <0>;
 					compatible = "fsl,imx7d-ecspi", "fsl,imx51-ecspi";

arch/arm/boot/dts/ls1021a.dtsi

@@ -163,7 +163,7 @@ dcfg: dcfg@1ee0000 {
 			big-endian;
 		};
 
-		qspi: quadspi@1550000 {
+		qspi: spi@1550000 {
 			compatible = "fsl,ls1021a-qspi";
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -330,7 +330,7 @@ map0 {
 			};
 		};
 
-		dspi0: dspi@2100000 {
+		dspi0: spi@2100000 {
 			compatible = "fsl,ls1021a-v1.0-dspi";
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -343,7 +343,7 @@ dspi0: dspi@2100000 {
 			status = "disabled";
 		};
 
-		dspi1: dspi@2110000 {
+		dspi1: spi@2110000 {
 			compatible = "fsl,ls1021a-v1.0-dspi";
 			#address-cells = <1>;
 			#size-cells = <0>;

arch/arm/boot/dts/vfxxx.dtsi

@@ -190,7 +190,7 @@ uart3: serial@4002a000 {
 				status = "disabled";
 			};
 
-			dspi0: dspi0@4002c000 {
+			dspi0: spi@4002c000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				compatible = "fsl,vf610-dspi";
@@ -205,7 +205,7 @@ dspi0: dspi0@4002c000 {
 				status = "disabled";
 			};
 
-			dspi1: dspi1@4002d000 {
+			dspi1: spi@4002d000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				compatible = "fsl,vf610-dspi";
@@ -339,7 +339,7 @@ wdoga5: wdog@4003e000 {
 				status = "disabled";
 			};
 
-			qspi0: quadspi@40044000 {
+			qspi0: spi@40044000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				compatible = "fsl,vf610-qspi";
@@ -569,7 +569,7 @@ uart5: serial@400aa000 {
 				status = "disabled";
 			};
 
-			dspi2: dspi2@400ac000 {
+			dspi2: spi@400ac000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				compatible = "fsl,vf610-dspi";
@@ -584,7 +584,7 @@ dspi2: dspi2@400ac000 {
 				status = "disabled";
 			};
 
-			dspi3: dspi3@400ad000 {
+			dspi3: spi@400ad000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				compatible = "fsl,vf610-dspi";
@@ -665,7 +665,7 @@ ftm: ftm@400b8000 {
 				status = "disabled";
 			};
 
-			qspi1: quadspi@400c4000 {
+			qspi1: spi@400c4000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				compatible = "fsl,vf610-qspi";