Commit 5a441aad authored by Angus Ainslie (Purism)'s avatar Angus Ainslie (Purism) Committed by Jonathan Cameron

iio: light: vcnl4000 add support for the VCNL4040 proximity and light sensor

The VCNL4040 is almost identical to the VCNL4200 as far as register
layout goes but just need to check a different ID register location.
Signed-off-by: default avatarAngus Ainslie (Purism) <angus@akkea.ca>
Signed-off-by: default avatarJonathan Cameron <Jonathan.Cameron@huawei.com>
parent 5da8affe
/*
* vcnl4000.c - Support for Vishay VCNL4000/4010/4020/4200 combined ambient
* vcnl4000.c - Support for Vishay VCNL4000/4010/4020/4040/4200 combined ambient
* light and proximity sensor
*
* Copyright 2012 Peter Meerwald <pmeerw@pmeerw.net>
* Copyright 2019 Pursim SPC
*
* This file is subject to the terms and conditions of version 2 of
* the GNU General Public License. See the file COPYING in the main
......@@ -10,13 +11,14 @@
*
* IIO driver for:
* VCNL4000/10/20 (7-bit I2C slave address 0x13)
* VCNL4040 (7-bit I2C slave address 0x60)
* VCNL4200 (7-bit I2C slave address 0x51)
*
* TODO:
* allow to adjust IR current
* proximity threshold and event handling
* periodic ALS/proximity measurement (VCNL4010/20)
* interrupts (VCNL4010/20, VCNL4200)
* interrupts (VCNL4010/20/40, VCNL4200)
*/
#include <linux/module.h>
......@@ -30,6 +32,7 @@
#define VCNL4000_DRV_NAME "vcnl4000"
#define VCNL4000_PROD_ID 0x01
#define VCNL4010_PROD_ID 0x02 /* for VCNL4020, VCNL4010 */
#define VCNL4040_PROD_ID 0x86
#define VCNL4200_PROD_ID 0x58
#define VCNL4000_COMMAND 0x80 /* Command register */
......@@ -49,6 +52,8 @@
#define VCNL4200_AL_DATA 0x09 /* Ambient light data */
#define VCNL4200_DEV_ID 0x0e /* Device ID, slave address and version */
#define VCNL4040_DEV_ID 0x0c /* Device ID and version */
/* Bit masks for COMMAND register */
#define VCNL4000_AL_RDY BIT(6) /* ALS data ready? */
#define VCNL4000_PS_RDY BIT(5) /* proximity data ready? */
......@@ -58,6 +63,7 @@
enum vcnl4000_device_ids {
VCNL4000,
VCNL4010,
VCNL4040,
VCNL4200,
};
......@@ -90,6 +96,7 @@ static const struct i2c_device_id vcnl4000_id[] = {
{ "vcnl4000", VCNL4000 },
{ "vcnl4010", VCNL4010 },
{ "vcnl4020", VCNL4010 },
{ "vcnl4040", VCNL4040 },
{ "vcnl4200", VCNL4200 },
{ }
};
......@@ -128,14 +135,26 @@ static int vcnl4000_init(struct vcnl4000_data *data)
static int vcnl4200_init(struct vcnl4000_data *data)
{
int ret;
int ret, id;
ret = i2c_smbus_read_word_data(data->client, VCNL4200_DEV_ID);
if (ret < 0)
return ret;
if ((ret & 0xff) != VCNL4200_PROD_ID)
id = ret & 0xff;
if (id != VCNL4200_PROD_ID) {
ret = i2c_smbus_read_word_data(data->client, VCNL4040_DEV_ID);
if (ret < 0)
return ret;
id = ret & 0xff;
if (id != VCNL4040_PROD_ID)
return -ENODEV;
}
dev_dbg(&data->client->dev, "device id 0x%x", id);
data->rev = (ret >> 8) & 0xf;
......@@ -150,9 +169,19 @@ static int vcnl4200_init(struct vcnl4000_data *data)
data->al_scale = 24000;
data->vcnl4200_al.reg = VCNL4200_AL_DATA;
data->vcnl4200_ps.reg = VCNL4200_PS_DATA;
/* Integration time is 50ms, but the experiments show 54ms in total. */
switch (id) {
case VCNL4200_PROD_ID:
/* Integration time is 50ms, but the experiments */
/* show 54ms in total. */
data->vcnl4200_al.sampling_rate = ktime_set(0, 54000 * 1000);
data->vcnl4200_ps.sampling_rate = ktime_set(0, 4200 * 1000);
break;
case VCNL4040_PROD_ID:
/* Integration time is 80ms, add 10ms. */
data->vcnl4200_al.sampling_rate = ktime_set(0, 100000 * 1000);
data->vcnl4200_ps.sampling_rate = ktime_set(0, 100000 * 1000);
break;
}
data->vcnl4200_al.last_measurement = ktime_set(0, 0);
data->vcnl4200_ps.last_measurement = ktime_set(0, 0);
mutex_init(&data->vcnl4200_al.lock);
......@@ -271,6 +300,12 @@ static const struct vcnl4000_chip_spec vcnl4000_chip_spec_cfg[] = {
.measure_light = vcnl4000_measure_light,
.measure_proximity = vcnl4000_measure_proximity,
},
[VCNL4040] = {
.prod = "VCNL4040",
.init = vcnl4200_init,
.measure_light = vcnl4200_measure_light,
.measure_proximity = vcnl4200_measure_proximity,
},
[VCNL4200] = {
.prod = "VCNL4200",
.init = vcnl4200_init,
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment