Merge tag 'omap-for-v3.16/fixes-against-rc1' of...

Merge tag 'omap-for-v3.16/fixes-against-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes

Merge OMAP fixes from Tony Lindgren:

Fixes for omaps for issues discovered during the merge window and
enabling of a few features that had to wait for the driver
dependencies to clear.

The fixes included are:

- Fix am43xx hard reset flags
- Fix SoC detection for DRA722
- Fix CPU OPP table for omap5
- Fix legacy mux parser bug if requested muxname is a prefix of
  multiple mux entries
- Fix qspi interrupt binding that relies on the irq crossbar
  that has not yet been enabled
- Add missing phy_sel for am43x-epos-evm
- Drop unused gic_init_irq() that is no longer needed

And the enabling of features that had driver dependencies are:

- Change dra7 to use Audio Tracking Logic clock instead of a fixed
  clock now that the clock driver for it has been merged

- Enable off idle configuration for selected omaps as all the kernel
  dependencies for device tree based booting are finally merged as
  this is needed to get the automated PM tests working finally with
  device tree based booting

- Add hwmod entry for ocp2scp3 for omap5 to get sata working as
  all the driver dependencies are now in the kernel and this patch
  fell through the cracks during the merge window

* tag 'omap-for-v3.16/fixes-against-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: dts: dra7-evm: remove interrupt binding
  ARM: OMAP2+: Fix parser-bug in platform muxing code
  ARM: DTS: dra7/dra7xx-clocks: ATL related changes
  ARM: OMAP2+: drop unused function
  ARM: dts: am43x-epos-evm: Add Missing cpsw-phy-sel for am43x-epos-evm
  ARM: dts: omap5: Update CPU OPP table as per final production Manual
  ARM: DRA722: add detection of SoC information
  ARM: dts: Enable twl4030 off-idle configuration for selected omaps
  ARM: OMAP5: hwmod: Add ocp2scp3 and sata hwmods
  ARM: OMAP2+: hwmod: Change hardreset soc_ops for AM43XX

arch/arm/boot/dts/am43x-epos-evm.dts

@@ -319,6 +319,10 @@ &cpsw_emac1 {
 	phy-mode = "rmii";
 };
 
+&phy_sel {
+	rmii-clock-ext;
+};
+
 &i2c0 {
 	status = "okay";
 	pinctrl-names = "default";

arch/arm/boot/dts/dra7.dtsi

@@ -773,7 +773,6 @@ qspi: qspi@4b300000 {
 			clocks = <&qspi_gfclk_div>;
 			clock-names = "fck";
 			num-cs = <4>;
-			interrupts = <0 343 0x4>;
 			status = "disabled";
 		};
 
@@ -984,6 +983,17 @@ gpmc: gpmc@50000000 {
 			#size-cells = <1>;
 			status = "disabled";
 		};
+
+		atl: atl@4843c000 {
+			compatible = "ti,dra7-atl";
+			reg = <0x4843c000 0x3ff>;
+			ti,hwmods = "atl";
+			ti,provided-clocks = <&atl_clkin0_ck>, <&atl_clkin1_ck>,
+					     <&atl_clkin2_ck>, <&atl_clkin3_ck>;
+			clocks = <&atl_gfclk_mux>;
+			clock-names = "fck";
+			status = "disabled";
+		};
 	};
 };
 

arch/arm/boot/dts/dra7xx-clocks.dtsi

@@ -10,26 +10,26 @@
 &cm_core_aon_clocks {
 	atl_clkin0_ck: atl_clkin0_ck {
 		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <0>;
+		compatible = "ti,dra7-atl-clock";
+		clocks = <&atl_gfclk_mux>;
 	};
 
 	atl_clkin1_ck: atl_clkin1_ck {
 		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <0>;
+		compatible = "ti,dra7-atl-clock";
+		clocks = <&atl_gfclk_mux>;
 	};
 
 	atl_clkin2_ck: atl_clkin2_ck {
 		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <0>;
+		compatible = "ti,dra7-atl-clock";
+		clocks = <&atl_gfclk_mux>;
 	};
 
 	atl_clkin3_ck: atl_clkin3_ck {
 		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <0>;
+		compatible = "ti,dra7-atl-clock";
+		clocks = <&atl_gfclk_mux>;
 	};
 
 	hdmi_clkin_ck: hdmi_clkin_ck {

arch/arm/boot/dts/omap3-beagle-xm.dts

@@ -251,6 +251,11 @@ twl_audio: audio {
 			codec {
 			};
 		};
+
+		twl_power: power {
+			compatible = "ti,twl4030-power-beagleboard-xm", "ti,twl4030-power-idle-osc-off";
+			ti,use_poweroff;
+		};
 	};
 };
 
@@ -301,6 +306,7 @@ &usb_otg_hs {
 };
 
 &uart3 {
+	interrupts-extended = <&intc 74 &omap3_pmx_core OMAP3_UART3_RX>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart3_pins>;
 };

arch/arm/boot/dts/omap3-evm-common.dtsi

@@ -50,6 +50,13 @@ &backlight0 {
 	gpios = <&twl_gpio 18 GPIO_ACTIVE_LOW>;
 };
 
+&twl {
+	twl_power: power {
+		compatible = "ti,twl4030-power-omap3-evm", "ti,twl4030-power-idle";
+		ti,use_poweroff;
+	};
+};
+
 &i2c2 {
 	clock-frequency = <400000>;
 };

arch/arm/boot/dts/omap3-n900.dts

@@ -351,6 +351,11 @@ twl_audio: audio {
 		compatible = "ti,twl4030-audio";
 		ti,enable-vibra = <1>;
 	};
+
+	twl_power: power {
+		compatible = "ti,twl4030-power-n900", "ti,twl4030-power-idle-osc-off";
+		ti,use_poweroff;
+	};
 };
 
 &twl_keypad {

arch/arm/boot/dts/omap5.dtsi

@@ -45,7 +45,6 @@ cpu0: cpu@0 {
 
 			operating-points = <
 				/* kHz    uV */
-				500000  880000
 				1000000 1060000
 				1500000 1250000
 			>;

arch/arm/mach-omap2/Makefile

@@ -110,14 +110,16 @@ obj-y					+= prm_common.o cm_common.o
 obj-$(CONFIG_ARCH_OMAP2)		+= prm2xxx_3xxx.o prm2xxx.o cm2xxx.o
 obj-$(CONFIG_ARCH_OMAP3)		+= prm2xxx_3xxx.o prm3xxx.o cm3xxx.o
 obj-$(CONFIG_ARCH_OMAP3)		+= vc3xxx_data.o vp3xxx_data.o
-obj-$(CONFIG_SOC_AM33XX)		+= prm33xx.o cm33xx.o
 omap-prcm-4-5-common			=  cminst44xx.o cm44xx.o prm44xx.o \
 					   prcm_mpu44xx.o prminst44xx.o \
 					   vc44xx_data.o vp44xx_data.o
 obj-$(CONFIG_ARCH_OMAP4)		+= $(omap-prcm-4-5-common)
 obj-$(CONFIG_SOC_OMAP5)			+= $(omap-prcm-4-5-common)
 obj-$(CONFIG_SOC_DRA7XX)		+= $(omap-prcm-4-5-common)
-obj-$(CONFIG_SOC_AM43XX)		+= $(omap-prcm-4-5-common)
+am33xx-43xx-prcm-common			+= prm33xx.o cm33xx.o
+obj-$(CONFIG_SOC_AM33XX)		+= $(am33xx-43xx-prcm-common)
+obj-$(CONFIG_SOC_AM43XX)		+= $(omap-prcm-4-5-common) \
+					   $(am33xx-43xx-prcm-common)
 
 # OMAP voltage domains
 voltagedomain-common			:= voltage.o vc.o vp.o

arch/arm/mach-omap2/cm33xx.h

@@ -380,7 +380,7 @@ void am33xx_cm_clkdm_disable_hwsup(u16 inst, u16 cdoffs);
 void am33xx_cm_clkdm_force_sleep(u16 inst, u16 cdoffs);
 void am33xx_cm_clkdm_force_wakeup(u16 inst, u16 cdoffs);
 
-#ifdef CONFIG_SOC_AM33XX
+#if defined(CONFIG_SOC_AM33XX) || defined(CONFIG_SOC_AM43XX)
 extern int am33xx_cm_wait_module_idle(u16 inst, s16 cdoffs,
 					u16 clkctrl_offs);
 extern void am33xx_cm_module_enable(u8 mode, u16 inst, s16 cdoffs,

arch/arm/mach-omap2/common.h

@@ -248,7 +248,6 @@ static inline void __iomem *omap4_get_scu_base(void)
 }
 #endif
 
-extern void __init gic_init_irq(void);
 extern void gic_dist_disable(void);
 extern void gic_dist_enable(void);
 extern bool gic_dist_disabled(void);

arch/arm/mach-omap2/id.c

@@ -649,6 +649,18 @@ void __init dra7xxx_check_revision(void)
 		}
 		break;
 
+	case 0xb9bc:
+		switch (rev) {
+		case 0:
+			omap_revision = DRA722_REV_ES1_0;
+			break;
+		default:
+			/* If we have no new revisions */
+			omap_revision = DRA722_REV_ES1_0;
+			break;
+		}
+		break;
+
 	default:
 		/* Unknown default to latest silicon rev as default*/
 		pr_warn("%s: unknown idcode=0x%08x (hawkeye=0x%08x,rev=0x%d)\n",

arch/arm/mach-omap2/mux.c

@@ -183,7 +183,9 @@ static int __init _omap_mux_get_by_name(struct omap_mux_partition *partition,
 		m0_entry = mux->muxnames[0];
 
 		/* First check for full name in mode0.muxmode format */
-		if (mode0_len && strncmp(muxname, m0_entry, mode0_len))
+		if (mode0_len)
+			if (strncmp(muxname, m0_entry, mode0_len) ||
+			    (strlen(m0_entry) != mode0_len))
 				continue;
 
 		/* Then check for muxmode only */

arch/arm/mach-omap2/omap4-common.c

@@ -102,26 +102,6 @@ void __init omap_barriers_init(void)
 {}
 #endif
 
-void __init gic_init_irq(void)
-{
-	void __iomem *omap_irq_base;
-
-	/* Static mapping, never released */
-	gic_dist_base_addr = ioremap(OMAP44XX_GIC_DIST_BASE, SZ_4K);
-	BUG_ON(!gic_dist_base_addr);
-
-	twd_base = ioremap(OMAP44XX_LOCAL_TWD_BASE, SZ_4K);
-	BUG_ON(!twd_base);
-
-	/* Static mapping, never released */
-	omap_irq_base = ioremap(OMAP44XX_GIC_CPU_BASE, SZ_512);
-	BUG_ON(!omap_irq_base);
-
-	omap_wakeupgen_init();
-
-	gic_init(0, 29, gic_dist_base_addr, omap_irq_base);
-}
-
 void gic_dist_disable(void)
 {
 	if (gic_dist_base_addr)

arch/arm/mach-omap2/omap_hwmod.c

@@ -4251,9 +4251,9 @@ void __init omap_hwmod_init(void)
 		soc_ops.enable_module = _omap4_enable_module;
 		soc_ops.disable_module = _omap4_disable_module;
 		soc_ops.wait_target_ready = _omap4_wait_target_ready;
-		soc_ops.assert_hardreset = _omap4_assert_hardreset;
-		soc_ops.deassert_hardreset = _omap4_deassert_hardreset;
-		soc_ops.is_hardreset_asserted = _omap4_is_hardreset_asserted;
+		soc_ops.assert_hardreset = _am33xx_assert_hardreset;
+		soc_ops.deassert_hardreset = _am33xx_deassert_hardreset;
+		soc_ops.is_hardreset_asserted = _am33xx_is_hardreset_asserted;
 		soc_ops.init_clkdm = _init_clkdm;
 	} else if (soc_is_am33xx()) {
 		soc_ops.enable_module = _am33xx_enable_module;

arch/arm/mach-omap2/omap_hwmod_54xx_data.c

@@ -2020,6 +2020,77 @@ static struct omap_hwmod omap54xx_wd_timer2_hwmod = {
 	},
 };
 
+/*
+ * 'ocp2scp' class
+ * bridge to transform ocp interface protocol to scp (serial control port)
+ * protocol
+ */
+/* ocp2scp3 */
+static struct omap_hwmod omap54xx_ocp2scp3_hwmod;
+/* l4_cfg -> ocp2scp3 */
+static struct omap_hwmod_ocp_if omap54xx_l4_cfg__ocp2scp3 = {
+	.master		= &omap54xx_l4_cfg_hwmod,
+	.slave		= &omap54xx_ocp2scp3_hwmod,
+	.clk		= "l4_root_clk_div",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod omap54xx_ocp2scp3_hwmod = {
+	.name		= "ocp2scp3",
+	.class		= &omap54xx_ocp2scp_hwmod_class,
+	.clkdm_name	= "l3init_clkdm",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = OMAP54XX_CM_L3INIT_OCP2SCP3_CLKCTRL_OFFSET,
+			.context_offs = OMAP54XX_RM_L3INIT_OCP2SCP3_CONTEXT_OFFSET,
+			.modulemode   = MODULEMODE_HWCTRL,
+		},
+	},
+};
+
+/*
+ * 'sata' class
+ * sata:  serial ata interface  gen2 compliant   ( 1 rx/ 1 tx)
+ */
+
+static struct omap_hwmod_class_sysconfig omap54xx_sata_sysc = {
+	.sysc_offs	= 0x0000,
+	.sysc_flags	= (SYSC_HAS_MIDLEMODE | SYSC_HAS_SIDLEMODE),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
+			   SIDLE_SMART_WKUP | MSTANDBY_FORCE | MSTANDBY_NO |
+			   MSTANDBY_SMART | MSTANDBY_SMART_WKUP),
+	.sysc_fields	= &omap_hwmod_sysc_type2,
+};
+
+static struct omap_hwmod_class omap54xx_sata_hwmod_class = {
+	.name	= "sata",
+	.sysc	= &omap54xx_sata_sysc,
+};
+
+/* sata */
+static struct omap_hwmod omap54xx_sata_hwmod = {
+	.name		= "sata",
+	.class		= &omap54xx_sata_hwmod_class,
+	.clkdm_name	= "l3init_clkdm",
+	.flags		= HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY,
+	.main_clk	= "func_48m_fclk",
+	.mpu_rt_idx	= 1,
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = OMAP54XX_CM_L3INIT_SATA_CLKCTRL_OFFSET,
+			.context_offs = OMAP54XX_RM_L3INIT_SATA_CONTEXT_OFFSET,
+			.modulemode   = MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+/* l4_cfg -> sata */
+static struct omap_hwmod_ocp_if omap54xx_l4_cfg__sata = {
+	.master		= &omap54xx_l4_cfg_hwmod,
+	.slave		= &omap54xx_sata_hwmod,
+	.clk		= "l3_iclk_div",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
 
 /*
  * Interfaces
@@ -2765,6 +2836,8 @@ static struct omap_hwmod_ocp_if *omap54xx_hwmod_ocp_ifs[] __initdata = {
 	&omap54xx_l4_cfg__usb_tll_hs,
 	&omap54xx_l4_cfg__usb_otg_ss,
 	&omap54xx_l4_wkup__wd_timer2,
+	&omap54xx_l4_cfg__ocp2scp3,
+	&omap54xx_l4_cfg__sata,
 	NULL,
 };
 

arch/arm/mach-omap2/soc.h

@@ -462,6 +462,7 @@ IS_OMAP_TYPE(3430, 0x3430)
 #define DRA7XX_CLASS		0x07000000
 #define DRA752_REV_ES1_0	(DRA7XX_CLASS | (0x52 << 16) | (0x10 << 8))
 #define DRA752_REV_ES1_1	(DRA7XX_CLASS | (0x52 << 16) | (0x11 << 8))
+#define DRA722_REV_ES1_0	(DRA7XX_CLASS | (0x22 << 16) | (0x10 << 8))
 
 void omap2xxx_check_revision(void);
 void omap3xxx_check_revision(void);