Merge

MAINTAINERS

+
 	List of maintainers and how to submit kernel changes
 
 Please try to follow the guidelines below.  This will make things
@@ -261,7 +262,6 @@ BFS FILE SYSTEM
 P:	Tigran A. Aivazian
 M:	tigran@veritas.com
 L:	linux-kernel@vger.kernel.org
-W:	http://www.ocston.org/~tigran/patches/bfs
 S:	Maintained
 
 BLOCK LAYER
@@ -654,8 +654,8 @@ W:	http://www.nyx.net/~arobinso
 S:	Maintained
 
 HFS FILESYSTEM
-P:	Adrian Sun
-M:	asun@cobaltnet.com
+P:	Oliver Neukum
+M:	oliver@neukum.org
 L:	linux-kernel@vger.kernel.org
 S:	Maintained
 

arch/i386/config.in

@@ -453,6 +453,7 @@ fi
 
 bool 'Kernel debugging' CONFIG_DEBUG_KERNEL
 if [ "$CONFIG_DEBUG_KERNEL" != "n" ]; then
+   bool '  Check for stack overflows' CONFIG_DEBUG_STACKOVERFLOW
    bool '  Debug memory allocations' CONFIG_DEBUG_SLAB
    bool '  Memory mapped I/O debugging' CONFIG_DEBUG_IOVIRT
    bool '  Magic SysRq key' CONFIG_MAGIC_SYSRQ

arch/i386/kernel/bluesmoke.c

@@ -300,7 +300,6 @@ static void mce_checkregs (void *info)
 
 static void do_mce_timer(void *data)
 { 
-	mce_checkregs(NULL);
 	smp_call_function (mce_checkregs, NULL, 1, 1);
 } 
 

arch/i386/kernel/cpu/amd.c

@@ -42,6 +42,21 @@ static void __init init_amd(struct cpuinfo_x86 *c)
 
 	switch(c->x86)
 	{
+		case 4:
+		/*
+		 * General Systems BIOSen alias the cpu frequency registers
+		 * of the Elan at 0x000df000. Unfortuantly, one of the Linux
+		 * drivers subsequently pokes it, and changes the CPU speed.
+		 * Workaround : Remove the unneeded alias.
+		 */
+#define CBAR		(0xfffc) /* Configuration Base Address  (32-bit) */
+#define CBAR_ENB	(0x80000000)
+#define CBAR_KEY	(0X000000CB)
+			if (c->x86_model==9 || c->x86_model == 10) {
+				if (inl (CBAR) & CBAR_ENB)
+					outl (0 | CBAR_KEY, CBAR);
+			}
+
 		case 5:
 			if( c->x86_model < 6 )
 			{

arch/i386/kernel/irq.c

@@ -328,8 +328,22 @@ asmlinkage unsigned int do_IRQ(struct pt_regs regs)
 	irq_desc_t *desc = irq_desc + irq;
 	struct irqaction * action;
 	unsigned int status;
+	long esp;
 
 	irq_enter();
+
+#ifdef CONFIG_DEBUG_STACKOVERFLOW
+	/* Debugging check for stack overflow: is there less than 1KB free? */
+	__asm__ __volatile__("andl %%esp,%0" : "=r" (esp) : "0" (8191));
+	if (unlikely(esp < (sizeof(struct task_struct) + 1024))) {
+		extern void show_stack(unsigned long *);
+
+		printk("do_IRQ: stack overflow: %ld\n",
+		esp - sizeof(struct task_struct));
+		__asm__ __volatile__("movl %%esp,%0" : "=r" (esp));
+		show_stack((void *)esp);
+	}
+#endif
 	kstat.irqs[cpu][irq]++;
 	spin_lock(&desc->lock);
 	desc->handler->ack(irq);

arch/i386/kernel/microcode.c

@@ -260,7 +260,7 @@ static void do_update_one(void *unused)
 			
 			if (microcode[i].rev < rev) {
 				spin_unlock_irqrestore(&microcode_update_lock, flags);
-				printk(KERN_ERR 
+				printk(KERN_INFO
 				       "microcode: CPU%d not 'upgrading' to earlier revision"
 				       " %d (current=%d)\n", cpu_num, microcode[i].rev, rev);
 				return;
@@ -268,7 +268,7 @@ static void do_update_one(void *unused)
 				/* notify the caller of success on this cpu */
 				req->err = 0;
 				spin_unlock_irqrestore(&microcode_update_lock, flags);
-				printk(KERN_ERR 
+				printk(KERN_INFO
 					"microcode: CPU%d already at revision"
 					" %d (current=%d)\n", cpu_num, microcode[i].rev, rev);
 				return;

arch/i386/mm/init.c

@@ -482,7 +482,7 @@ void __init mem_init(void)
 	datasize =  (unsigned long) &_edata - (unsigned long) &_etext;
 	initsize =  (unsigned long) &__init_end - (unsigned long) &__init_begin;
 
-	printk("Memory: %luk/%luk available (%dk kernel code, %dk reserved, %dk data, %dk init, %ldk highmem)\n",
+	printk(KERN_INFO "Memory: %luk/%luk available (%dk kernel code, %dk reserved, %dk data, %dk init, %ldk highmem)\n",
 		(unsigned long) nr_free_pages() << (PAGE_SHIFT-10),
 		num_physpages << (PAGE_SHIFT-10),
 		codesize >> 10,
@@ -584,14 +584,14 @@ void free_initmem(void)
 		free_page(addr);
 		totalram_pages++;
 	}
-	printk ("Freeing unused kernel memory: %dk freed\n", (&__init_end - &__init_begin) >> 10);
+	printk (KERN_INFO "Freeing unused kernel memory: %dk freed\n", (&__init_end - &__init_begin) >> 10);
 }
 
 #ifdef CONFIG_BLK_DEV_INITRD
 void free_initrd_mem(unsigned long start, unsigned long end)
 {
 	if (start < end)
-		printk ("Freeing initrd memory: %ldk freed\n", (end - start) >> 10);
+		printk (KERN_INFO "Freeing initrd memory: %ldk freed\n", (end - start) >> 10);
 	for (; start < end; start += PAGE_SIZE) {
 		ClearPageReserved(virt_to_page(start));
 		set_page_count(virt_to_page(start), 1);

arch/i386/pci/i386.c

@@ -291,7 +291,7 @@ void pcibios_set_master(struct pci_dev *dev)
 		lat = pcibios_max_latency;
 	else
 		return;
-	printk("PCI: Setting latency timer of device %s to %d\n", dev->slot_name, lat);
+	printk(KERN_DEBUG "PCI: Setting latency timer of device %s to %d\n", dev->slot_name, lat);
 	pci_write_config_byte(dev, PCI_LATENCY_TIMER, lat);
 }
 

arch/ia64/ia32/sys_ia32.c

@@ -3763,12 +3763,15 @@ do_smb_super_data_conv(void *raw_data)
 	struct smb_mount_data *s = (struct smb_mount_data *)raw_data;
 	struct smb_mount_data32 *s32 = (struct smb_mount_data32 *)raw_data;
 
+	if (s32->version != SMB_MOUNT_OLDVERSION)
+		goto out;
 	s->version = s32->version;
 	s->mounted_uid = s32->mounted_uid;
 	s->uid = s32->uid;
 	s->gid = s32->gid;
 	s->file_mode = s32->file_mode;
 	s->dir_mode = s32->dir_mode;
+out:
 	return raw_data;
 }
 

arch/ppc64/kernel/sys_ppc32.c

@@ -333,12 +333,15 @@ static void *do_smb_super_data_conv(void *raw_data)
 	struct smb_mount_data *s = (struct smb_mount_data *)raw_data;
 	struct smb_mount_data32 *s32 = (struct smb_mount_data32 *)raw_data;
 
+	if (s32->version != SMB_MOUNT_OLDVERSION)
+		goto out;
 	s->version = s32->version;
 	s->mounted_uid = s32->mounted_uid;
 	s->uid = s32->uid;
 	s->gid = s32->gid;
 	s->file_mode = s32->file_mode;
 	s->dir_mode = s32->dir_mode;
+out:
 	return raw_data;
 }
 

arch/s390x/kernel/linux32.c

@@ -1563,12 +1563,15 @@ static void *do_smb_super_data_conv(void *raw_data)
 	struct smb_mount_data *s = (struct smb_mount_data *)raw_data;
 	struct smb_mount_data32 *s32 = (struct smb_mount_data32 *)raw_data;
 
+	if (s32->version != SMB_MOUNT_OLDVERSION)
+		goto out;
 	s->version = s32->version;
 	s->mounted_uid = low2highuid(s32->mounted_uid);
 	s->uid = low2highuid(s32->uid);
 	s->gid = low2highgid(s32->gid);
 	s->file_mode = s32->file_mode;
 	s->dir_mode = s32->dir_mode;
+out:
 	return raw_data;
 }
 

arch/sparc64/kernel/sys_sparc32.c

@@ -1582,6 +1582,8 @@ static void *do_smb_super_data_conv(void *raw_data)
 	struct smb_mount_data news, *s = &news;
 	struct smb_mount_data32 *s32 = (struct smb_mount_data32 *)raw_data;
 
+	if (s32->version != SMB_MOUNT_OLDVERSION)
+		goto out;
 	s->version = s32->version;
 	s->mounted_uid = low2highuid(s32->mounted_uid);
 	s->uid = low2highuid(s32->uid);
@@ -1589,6 +1591,7 @@ static void *do_smb_super_data_conv(void *raw_data)
 	s->file_mode = s32->file_mode;
 	s->dir_mode = s32->dir_mode;
 	memcpy(raw_data, s, sizeof(struct smb_mount_data)); 
+out:
 	return raw_data;
 }
 

drivers/block/paride/epat.c

@@ -304,7 +304,6 @@ static void epat_log_adapter( PIA *pi, char * scratch, int verbose )
 static void epat_init_proto( PIA *pi)
 
 {  	MOD_INC_USE_COUNT;
-	printk("epat_init_proto");
 }
 
 static void epat_release_proto( PIA *pi)

drivers/block/rd.c

@@ -90,7 +90,7 @@ static struct block_device *rd_bdev[NUM_RAMDISKS];/* Protected device data */
  */
 int rd_size = CONFIG_BLK_DEV_RAM_SIZE;		/* Size of the RAM disks */
 /*
- * It would be very desiderable to have a soft-blocksize (that in the case
+ * It would be very desirable to have a soft-blocksize (that in the case
  * of the ramdisk driver is also the hardblocksize ;) of PAGE_SIZE because
  * doing that we'll achieve a far better MM footprint. Using a rd_blocksize of
  * BLOCK_SIZE in the worst case we'll make PAGE_SIZE/BLOCK_SIZE buffer-pages

drivers/cdrom/gscd.c

@@ -268,7 +268,7 @@ static void __do_gscd_request(unsigned long dummy)
 		goto out;
 
 	if (req->cmd != READ) {
-		printk("GSCD: bad cmd %p\n", req->cmd);
+		printk("GSCD: bad cmd %d\n", req->cmd);
 		end_request(req, 0);
 		goto repeat;
 	}

drivers/cdrom/sbpcd.c

@@ -354,6 +354,13 @@
  * Marcin Dalecki
  */
 
+/*
+ * Add bio/kdev_t changes for 2.5.x required to make it work again. 
+ * Still room for improvement in the request handling here if anyone
+ * actually cares.  Bring your own chainsaw.    Paul G.  02/2002
+ */
+
+
 #include <linux/module.h>
 
 #include <linux/version.h>
@@ -463,6 +470,8 @@ MODULE_PARM(max_drives, "i");
 
 #define NUM_PROBE  (sizeof(sbpcd) / sizeof(int))
 
+static spinlock_t sbpcd_lock = SPIN_LOCK_UNLOCKED;
+
 /*==========================================================================*/
 
 #define INLINE inline
@@ -4856,21 +4865,19 @@ static void do_sbpcd_request(request_queue_t * q)
 	printk(" do_sbpcd_request[%di](%p:%ld+%ld), Pid:%d, Time:%li\n",
 		xnr, req, req->sector, req->nr_sectors, current->pid, jiffies);
 #endif
-
 	if (blk_queue_empty(q))
 		return;
 
 	req = elv_next_request(q);		/* take out our request so no other */
-	blkdev_dequeue_request(req);	/* task can fuck it up         GTL  */
 
 	if (req -> sector == -1)
 		end_request(req, 0);
 	spin_unlock_irq(q->queue_lock);
 
 	down(&ioctl_read_sem);
-	if (req->cmd != READ)
+	if (rq_data_dir(CURRENT) != READ)
 	{
-		msg(DBG_INF, "bad cmd %d\n", req->cmd);
+		msg(DBG_INF, "bad cmd %d\n", req->cmd[0]);
 		goto err_done;
 	}
 	p = req->rq_disk->private_data;
@@ -5775,6 +5782,12 @@ int __init sbpcd_init(void)
 		if (i>=0) p->CD_changed=1;
 	}
 
+	if (!request_region(CDo_command,4,major_name))
+	{
+		printk(KERN_WARNING "sbpcd: Unable to request region 0x%x\n", CDo_command);
+		return -EIO;
+	}
+
 	/*
 	 * Turn on the CD audio channels.
 	 * The addresses are obtained from SOUND_BASE (see sbpcd.h).
@@ -5795,9 +5808,8 @@ int __init sbpcd_init(void)
 	}
 	blk_init_queue(&sbpcd_queue, do_sbpcd_request, &sbpcd_lock);
 
-	request_region(CDo_command,4,major_name);
-
 	devfs_handle = devfs_mk_dir (NULL, "sbp", NULL);
+
 	for (j=0;j<NR_SBPCD;j++)
 	{
 		struct cdrom_device_info * sbpcd_infop;
@@ -5908,6 +5920,7 @@ void sbpcd_exit(void)
 	msg(DBG_INF, "%s module released.\n", major_name);
 }
 
+
 module_init(__sbpcd_init) /*HACK!*/;
 module_exit(sbpcd_exit);
 
@@ -5922,8 +5935,7 @@ static int sbpcd_media_changed(struct cdrom_device_info *cdi, int disc_nr)
         {
                 p->CD_changed=0;
                 msg(DBG_CHK,"medium changed (drive %s)\n", cdi->name);
-		/* BUG! Should invalidate buffers! --AJK */
-		/* Why should it do the above at all?! --mdcki */
+		invalidate_buffers(full_dev);
 		current_drive->diskstate_flags &= ~toc_bit;
 		current_drive->diskstate_flags &= ~cd_size_bit;
 #if SAFE_MIXED

drivers/char/Config.help

@@ -40,93 +40,6 @@ CONFIG_MWAVE
   The module will be called mwave.o. If you want to compile it as
   a module, say M here and read Documentation/modules.txt.
 
-CONFIG_AGP
-  AGP (Accelerated Graphics Port) is a bus system mainly used to
-  connect graphics cards to the rest of the system.
-
-  If you have an AGP system and you say Y here, it will be possible to
-  use the AGP features of your 3D rendering video card. This code acts
-  as a sort of "AGP driver" for the motherboard's chipset.
-
-  If you need more texture memory than you can get with the AGP GART
-  (theoretically up to 256 MB, but in practice usually 64 or 128 MB
-  due to kernel allocation issues), you could use PCI accesses
-  and have up to a couple gigs of texture space.
-
-  Note that this is the only means to have XFree4/GLX use
-  write-combining with MTRR support on the AGP bus. Without it, OpenGL
-  direct rendering will be a lot slower but still faster than PIO.
-
-  You should say Y here if you use XFree86 3.3.6 or 4.x and want to
-  use GLX or DRI.  If unsure, say N.
-
-  This driver is available as a module.  If you want to compile it as
-  a module, say M here and read <file:Documentation/modules.txt>.  The
-  module will be called agpgart.o.
-
-CONFIG_AGP_INTEL
-  This option gives you AGP support for the GLX component of the
-  XFree86 4.x on Intel 440LX/BX/GX, 815, 820, 830, 840, 845, 850 and 860 chipsets.
-
-  You should say Y here if you use XFree86 3.3.6 or 4.x and want to
-  use GLX or DRI.  If unsure, say N.
-
-CONFIG_AGP_I810
-  This option gives you AGP support for the Xserver on the Intel 810
-  815 and 830m chipset boards for their on-board integrated graphics. This
-  is required to do any useful video modes with these boards.
-
-CONFIG_AGP_I460
-  This option gives you AGP GART support for the Intel 460GX chipset
-  for IA64 processors.
-
-CONFIG_AGP_VIA
-  This option gives you AGP support for the GLX component of the
-  XFree86 4.x on VIA MPV3/Apollo Pro chipsets.
-
-  You should say Y here if you use XFree86 3.3.6 or 4.x and want to
-  use GLX or DRI.  If unsure, say N.
-
-CONFIG_AGP_AMD
-  This option gives you AGP support for the GLX component of the
-  XFree86 4.x on AMD Irongate, 761, and 762 chipsets.
-
-  You should say Y here if you use XFree86 3.3.6 or 4.x and want to
-  use GLX or DRI.  If unsure, say N.
-
-CONFIG_AGP_SIS
-  This option gives you AGP support for the GLX component of the "soon
-  to be released" XFree86 4.x on Silicon Integrated Systems [SiS]
-  chipsets.
-
-  Note that 5591/5592 AGP chipsets are NOT supported.
-
-  You should say Y here if you use XFree86 3.3.6 or 4.x and want to
-  use GLX or DRI.  If unsure, say N.
-
-CONFIG_AGP_SWORKS
-  Say Y here to support the Serverworks AGP card.  See 
-  <http://www.serverworks.com/> for product descriptions and images.
-
-CONFIG_AGP_ALI
-  This option gives you AGP support for the GLX component of the
-  XFree86 4.x on the following ALi chipsets.  The supported chipsets
-  include M1541, M1621, M1631, M1632, M1641,M1647,and M1651.
-  For the ALi-chipset question, ALi suggests you refer to
-  <http://www.ali.com.tw/eng/support/index.shtml>.
-
-  The M1541 chipset can do AGP 1x and 2x, but note that there is an
-  acknowledged incompatibility with Matrox G200 cards. Due to
-  timing issues, this chipset cannot do AGP 2x with the G200.
-  This is a hardware limitation. AGP 1x seems to be fine, though.
-
-  You should say Y here if you use XFree86 3.3.6 or 4.x and want to
-  use GLX or DRI.  If unsure, say N.
-
-CONFIG_AGP_HP_ZX1
-  This option gives you AGP GART support for the HP ZX1 chipset
-  for IA64 processors.
-
 CONFIG_I810_TCO
   Hardware driver for the TCO timer built into the Intel i810 and i815
   chipset family.  The TCO (Total Cost of Ownership) timer is a

drivers/char/drm/sis_ds.c

@@ -50,15 +50,16 @@ set_t *setInit(void)
   set_t *set;
 
   set = (set_t *)MALLOC(sizeof(set_t));
-  for(i = 0; i < SET_SIZE; i++){
-    set->list[i].free_next = i+1;    
-    set->list[i].alloc_next = -1;
-  }    
-  set->list[SET_SIZE-1].free_next = -1;
-  set->free = 0;
-  set->alloc = -1;
-  set->trace = -1;
-  
+  if (set) {
+    for(i = 0; i < SET_SIZE; i++){
+      set->list[i].free_next = i+1;    
+      set->list[i].alloc_next = -1;
+    }    
+    set->list[SET_SIZE-1].free_next = -1;
+    set->free = 0;
+    set->alloc = -1;
+    set->trace = -1;
+  }  
   return set;
 }
 
@@ -172,7 +173,8 @@ static void *calloc(size_t nmemb, size_t size)
 {
   void *addr;
   addr = kmalloc(nmemb*size, GFP_KERNEL);
-  memset(addr, 0, nmemb*size);
+  if (addr)
+    memset(addr, 0, nmemb*size);
   return addr;
 }
 #define free(n) kfree(n)

drivers/char/ftape/lowlevel/ftape-rw.h

@@ -71,7 +71,7 @@ typedef struct {
 
 /*      Count nr of 1's in pattern.
  */
-extern inline int count_ones(unsigned long mask)
+static inline int count_ones(unsigned long mask)
 {
 	int bits;
 

drivers/char/ftape/zftape/zftape-vtbl.h

@@ -168,11 +168,11 @@ extern int   zft_fake_volume_headers   (eof_mark_union *eof_map,
 extern int   zft_weof                  (unsigned int count, zft_position *pos);
 extern void  zft_move_past_eof         (zft_position *pos);
 
-extern inline int   zft_tape_at_eod         (const zft_position *pos);
-extern inline int   zft_tape_at_lbot        (const zft_position *pos);
-extern inline void  zft_position_before_eof (zft_position *pos, 
+static inline int   zft_tape_at_eod         (const zft_position *pos);
+static inline int   zft_tape_at_lbot        (const zft_position *pos);
+static inline void  zft_position_before_eof (zft_position *pos, 
 					     const zft_volinfo *volume);
-extern inline __s64 zft_check_for_eof(const zft_volinfo *vtbl,
+static inline __s64 zft_check_for_eof(const zft_volinfo *vtbl,
 				      const zft_position *pos);
 
 /* this function decrements the zft_seg_pos counter if we are right
@@ -180,7 +180,7 @@ extern inline __s64 zft_check_for_eof(const zft_volinfo *vtbl,
  * need to position before the eof mark.  NOTE: zft_tape_pos is not
  * changed 
  */
-extern inline void zft_position_before_eof(zft_position *pos, 
+static inline void zft_position_before_eof(zft_position *pos, 
 					   const zft_volinfo *volume)
 { 
 	TRACE_FUN(ft_t_flow);
@@ -195,7 +195,7 @@ extern inline void zft_position_before_eof(zft_position *pos,
 /*  Mmmh. Is the position at the end of the last volume, that is right
  *  before the last EOF mark also logical an EOD condition?
  */
-extern inline int zft_tape_at_eod(const zft_position *pos)
+static inline int zft_tape_at_eod(const zft_position *pos)
 { 
 	TRACE_FUN(ft_t_any);
 
@@ -207,7 +207,7 @@ extern inline int zft_tape_at_eod(const zft_position *pos)
 	}
 }
 
-extern inline int zft_tape_at_lbot(const zft_position *pos)
+static inline int zft_tape_at_lbot(const zft_position *pos)
 {
 	if (zft_qic_mode) {
 		return (pos->seg_pos <= zft_first_vtbl->start_seg &&
@@ -220,7 +220,7 @@ extern inline int zft_tape_at_lbot(const zft_position *pos)
 
 /* This one checks for EOF.  return remaing space (may be negative) 
  */
-extern inline __s64 zft_check_for_eof(const zft_volinfo *vtbl,
+static inline __s64 zft_check_for_eof(const zft_volinfo *vtbl,
 				      const zft_position *pos)
 {     
 	return (__s64)(vtbl->size - pos->volume_pos);

drivers/char/isicom.c

@@ -122,7 +122,7 @@ struct miscdevice isiloader_device = {
 };
 
  
-extern inline int WaitTillCardIsFree(unsigned short base)
+static inline int WaitTillCardIsFree(unsigned short base)
 {
 	unsigned long count=0;
 	while( (!(inw(base+0xe) & 0x1)) && (count++ < 6000000));
@@ -358,7 +358,7 @@ static inline int isicom_paranoia_check(struct isi_port const * port, kdev_t dev
 	return 0;
 }
 			
-extern inline void schedule_bh(struct isi_port * port)
+static inline void schedule_bh(struct isi_port * port)
 {
 	queue_task(&port->bh_tqueue, &tq_isicom);
 	mark_bh(ISICOM_BH);
@@ -823,7 +823,7 @@ static void isicom_config_port(struct isi_port * port)
  
 /* open et all */ 
 
-extern inline void isicom_setup_board(struct isi_board * bp)
+static inline void isicom_setup_board(struct isi_board * bp)
 {
 	int channel;
 	struct isi_port * port;
@@ -1091,7 +1091,7 @@ static int isicom_open(struct tty_struct * tty, struct file * filp)
  
 /* close et all */
 
-extern inline void isicom_shutdown_board(struct isi_board * bp)
+static inline void isicom_shutdown_board(struct isi_board * bp)
 {
 	int channel;
 	struct isi_port * port;
@@ -1353,7 +1353,7 @@ static int isicom_chars_in_buffer(struct tty_struct * tty)
 }
 
 /* ioctl et all */
-extern inline void isicom_send_break(struct isi_port * port, unsigned long length)
+static inline void isicom_send_break(struct isi_port * port, unsigned long length)
 {
 	struct isi_board * card = port->card;
 	short wait = 10;

drivers/char/specialix.c

@@ -239,28 +239,28 @@ static inline int sx_paranoia_check(struct specialix_port const * port,
  */
 
 /* Get board number from pointer */
-extern inline int board_No (struct specialix_board * bp)
+static inline int board_No (struct specialix_board * bp)
 {
 	return bp - sx_board;
 }
 
 
 /* Get port number from pointer */
-extern inline int port_No (struct specialix_port const * port)
+static inline int port_No (struct specialix_port const * port)
 {
 	return SX_PORT(port - sx_port); 
 }
 
 
 /* Get pointer to board from pointer to port */
-extern inline struct specialix_board * port_Board(struct specialix_port const * port)
+static inline struct specialix_board * port_Board(struct specialix_port const * port)
 {
 	return &sx_board[SX_BOARD(port - sx_port)];
 }
 
 
 /* Input Byte from CL CD186x register */
-extern inline unsigned char sx_in(struct specialix_board  * bp, unsigned short reg)
+static inline unsigned char sx_in(struct specialix_board  * bp, unsigned short reg)
 {
 	bp->reg = reg | 0x80;
 	outb (reg | 0x80, bp->base + SX_ADDR_REG);
@@ -269,7 +269,7 @@ extern inline unsigned char sx_in(struct specialix_board  * bp, unsigned short r
 
 
 /* Output Byte to CL CD186x register */
-extern inline void sx_out(struct specialix_board  * bp, unsigned short reg,
+static inline void sx_out(struct specialix_board  * bp, unsigned short reg,
 			  unsigned char val)
 {
 	bp->reg = reg | 0x80;
@@ -279,7 +279,7 @@ extern inline void sx_out(struct specialix_board  * bp, unsigned short reg,
 
 
 /* Input Byte from CL CD186x register */
-extern inline unsigned char sx_in_off(struct specialix_board  * bp, unsigned short reg)
+static inline unsigned char sx_in_off(struct specialix_board  * bp, unsigned short reg)
 {
 	bp->reg = reg;
 	outb (reg, bp->base + SX_ADDR_REG);
@@ -288,7 +288,7 @@ extern inline unsigned char sx_in_off(struct specialix_board  * bp, unsigned sho
 
 
 /* Output Byte to CL CD186x register */
-extern inline void sx_out_off(struct specialix_board  * bp, unsigned short reg,
+static inline void sx_out_off(struct specialix_board  * bp, unsigned short reg,
 			  unsigned char val)
 {
 	bp->reg = reg;
@@ -298,7 +298,7 @@ extern inline void sx_out_off(struct specialix_board  * bp, unsigned short reg,
 
 
 /* Wait for Channel Command Register ready */
-extern inline void sx_wait_CCR(struct specialix_board  * bp)
+static inline void sx_wait_CCR(struct specialix_board  * bp)
 {
 	unsigned long delay;
 
@@ -311,7 +311,7 @@ extern inline void sx_wait_CCR(struct specialix_board  * bp)
 
 
 /* Wait for Channel Command Register ready */
-extern inline void sx_wait_CCR_off(struct specialix_board  * bp)
+static inline void sx_wait_CCR_off(struct specialix_board  * bp)
 {
 	unsigned long delay;
 
@@ -327,13 +327,13 @@ extern inline void sx_wait_CCR_off(struct specialix_board  * bp)
  *  specialix IO8+ IO range functions.
  */
 
-extern inline int sx_check_io_range(struct specialix_board * bp)
+static inline int sx_check_io_range(struct specialix_board * bp)
 {
 	return check_region (bp->base, SX_IO_SPACE);
 }
 
 
-extern inline void sx_request_io_range(struct specialix_board * bp)
+static inline void sx_request_io_range(struct specialix_board * bp)
 {
 	request_region(bp->base, 
 	               bp->flags&SX_BOARD_IS_PCI?SX_PCI_IO_SPACE:SX_IO_SPACE,
@@ -341,7 +341,7 @@ extern inline void sx_request_io_range(struct specialix_board * bp)
 }
 
 
-extern inline void sx_release_io_range(struct specialix_board * bp)
+static inline void sx_release_io_range(struct specialix_board * bp)
 {
 	release_region(bp->base, 
 	               bp->flags&SX_BOARD_IS_PCI?SX_PCI_IO_SPACE:SX_IO_SPACE);
@@ -351,7 +351,7 @@ extern inline void sx_release_io_range(struct specialix_board * bp)
 /* Must be called with enabled interrupts */
 /* Ugly. Very ugly. Don't use this for anything else than initialization 
    code */
-extern inline void sx_long_delay(unsigned long delay)
+static inline void sx_long_delay(unsigned long delay)
 {
 	unsigned long i;
 	
@@ -599,7 +599,7 @@ static int sx_probe(struct specialix_board *bp)
  *  Interrupt processing routines.
  * */
 
-extern inline void sx_mark_event(struct specialix_port * port, int event)
+static inline void sx_mark_event(struct specialix_port * port, int event)
 {
 	/* 
 	 * I'm not quite happy with current scheme all serial
@@ -616,7 +616,7 @@ extern inline void sx_mark_event(struct specialix_port * port, int event)
 }
 
 
-extern inline struct specialix_port * sx_get_port(struct specialix_board * bp,
+static inline struct specialix_port * sx_get_port(struct specialix_board * bp,
 					       unsigned char const * what)
 {
 	unsigned char channel;
@@ -635,7 +635,7 @@ extern inline struct specialix_port * sx_get_port(struct specialix_board * bp,
 }
 
 
-extern inline void sx_receive_exc(struct specialix_board * bp)
+static inline void sx_receive_exc(struct specialix_board * bp)
 {
 	struct specialix_port *port;
 	struct tty_struct *tty;
@@ -701,7 +701,7 @@ extern inline void sx_receive_exc(struct specialix_board * bp)
 }
 
 
-extern inline void sx_receive(struct specialix_board * bp)
+static inline void sx_receive(struct specialix_board * bp)
 {
 	struct specialix_port *port;
 	struct tty_struct *tty;
@@ -732,7 +732,7 @@ extern inline void sx_receive(struct specialix_board * bp)
 }
 
 
-extern inline void sx_transmit(struct specialix_board * bp)
+static inline void sx_transmit(struct specialix_board * bp)
 {
 	struct specialix_port *port;
 	struct tty_struct *tty;
@@ -802,7 +802,7 @@ extern inline void sx_transmit(struct specialix_board * bp)
 }
 
 
-extern inline void sx_check_modem(struct specialix_board * bp)
+static inline void sx_check_modem(struct specialix_board * bp)
 {
 	struct specialix_port *port;
 	struct tty_struct *tty;
@@ -962,7 +962,7 @@ void turn_ints_on (struct specialix_board *bp)
 
 
 /* Called with disabled interrupts */
-extern inline int sx_setup_board(struct specialix_board * bp)
+static inline int sx_setup_board(struct specialix_board * bp)
 {
 	int error;
 
@@ -986,7 +986,7 @@ extern inline int sx_setup_board(struct specialix_board * bp)
 
 
 /* Called with disabled interrupts */
-extern inline void sx_shutdown_board(struct specialix_board *bp)
+static inline void sx_shutdown_board(struct specialix_board *bp)
 {
 	if (!(bp->flags & SX_BOARD_ACTIVE))
 		return;
@@ -1867,7 +1867,7 @@ static int sx_set_modem_info(struct specialix_port * port, unsigned int cmd,
 }
 
 
-extern inline void sx_send_break(struct specialix_port * port, unsigned long length)
+static inline void sx_send_break(struct specialix_port * port, unsigned long length)
 {
 	struct specialix_board *bp = port_Board(port);
 	unsigned long flags;
@@ -1886,7 +1886,7 @@ extern inline void sx_send_break(struct specialix_port * port, unsigned long len
 }
 
 
-extern inline int sx_set_serial_info(struct specialix_port * port,
+static inline int sx_set_serial_info(struct specialix_port * port,
                                      struct serial_struct * newinfo)
 {
 	struct serial_struct tmp;
@@ -1942,7 +1942,7 @@ extern inline int sx_set_serial_info(struct specialix_port * port,
 }
 
 
-extern inline int sx_get_serial_info(struct specialix_port * port,
+static inline int sx_get_serial_info(struct specialix_port * port,
 				     struct serial_struct * retinfo)
 {
 	struct serial_struct tmp;

drivers/message/fusion/linux_compat.h

@@ -75,11 +75,11 @@ typedef int (*__init_module_func_t)(void);
 typedef void (*__cleanup_module_func_t)(void);
 #define module_init(x) \
 	int init_module(void) __attribute__((alias(#x))); \
-	extern inline __init_module_func_t __init_module_inline(void) \
+	static inline __init_module_func_t __init_module_inline(void) \
 	{ return x; }
 #define module_exit(x) \
 	void cleanup_module(void) __attribute__((alias(#x))); \
-	extern inline __cleanup_module_func_t __cleanup_module_inline(void) \
+	static inline __cleanup_module_func_t __cleanup_module_inline(void) \
 	{ return x; }
 
 #else

drivers/nubus/nubus.c

@@ -72,7 +72,7 @@ struct nubus_board* nubus_boards;
    Etcetera, etcetera.  Hopefully this clears up some confusion over
    what the following code actually does.  */
  
-extern inline int not_useful(void *p, int map)
+static inline int not_useful(void *p, int map)
 {
 	unsigned long pv=(unsigned long)p;
 	pv &= 3;
@@ -148,14 +148,14 @@ static void nubus_move(unsigned char **ptr, int len, int map)
    have to expand it from a 24-bit signed number to a 32-bit signed
    number. */
 
-extern inline long nubus_expand32(long foo)
+static inline long nubus_expand32(long foo)
 {
 	if(foo & 0x00800000)	/* 24bit negative */
 		foo |= 0xFF000000;
 	return foo;
 }
 
-extern inline void *nubus_rom_addr(int slot)
+static inline void *nubus_rom_addr(int slot)
 {	
 	/*
 	 *	Returns the first byte after the card. We then walk

drivers/scsi/NCR53C9x.c

@@ -289,7 +289,7 @@ static inline void esp_advance_phase(Scsi_Cmnd *s, int newphase)
 #endif
 
 #ifdef DEBUG_ESP_CMDS
-extern inline void esp_cmd(struct NCR_ESP *esp, struct ESP_regs *eregs,
+inline void esp_cmd(struct NCR_ESP *esp, struct ESP_regs *eregs,
 			   unchar cmd)
 {
 	esp->espcmdlog[esp->espcmdent] = cmd;

drivers/scsi/esp.c

@@ -378,7 +378,7 @@ static inline void esp_advance_phase(Scsi_Cmnd *s, int newphase)
 #endif
 
 #ifdef DEBUG_ESP_CMDS
-extern inline void esp_cmd(struct esp *esp, u8 cmd)
+static inline void esp_cmd(struct esp *esp, u8 cmd)
 {
 	esp->espcmdlog[esp->espcmdent] = cmd;
 	esp->espcmdent = (esp->espcmdent + 1) & 31;

drivers/usb/class/audio.c

@@ -395,7 +395,7 @@ struct usb_audio_state {
 
 /* prevent picking up a bogus abs macro */
 #undef abs
-extern inline int abs(int x)
+static inline int abs(int x)
 {
         if (x < 0)
 		return -x;
@@ -404,7 +404,7 @@ extern inline int abs(int x)
                                 
 /* --------------------------------------------------------------------- */
 
-extern inline unsigned ld2(unsigned int x)
+static inline unsigned ld2(unsigned int x)
 {
 	unsigned r = 0;
 	
@@ -1939,13 +1939,13 @@ static void release(struct usb_audio_state *s)
 	kfree(s);
 }
 
-extern inline int prog_dmabuf_in(struct usb_audiodev *as)
+static inline int prog_dmabuf_in(struct usb_audiodev *as)
 {
 	usbin_stop(as);
 	return dmabuf_init(&as->usbin.dma);
 }
 
-extern inline int prog_dmabuf_out(struct usb_audiodev *as)
+static inline int prog_dmabuf_out(struct usb_audiodev *as)
 {
 	usbout_stop(as);
 	return dmabuf_init(&as->usbout.dma);
@@ -3253,7 +3253,7 @@ static void prepmixch(struct consmixstate *state)
 
 static void usb_audio_recurseunit(struct consmixstate *state, unsigned char unitid);
 
-extern inline int checkmixbmap(unsigned char *bmap, unsigned char flg, unsigned int inidx, unsigned int numoch)
+static inline int checkmixbmap(unsigned char *bmap, unsigned char flg, unsigned int inidx, unsigned int numoch)
 {
 	unsigned int idx;
 

sound/oss/ite8172.c

@@ -305,7 +305,7 @@ static LIST_HEAD(devs);
 
 /* --------------------------------------------------------------------- */
 
-extern inline unsigned ld2(unsigned int x)
+static inline unsigned ld2(unsigned int x)
 {
     unsigned r = 0;
 	
@@ -510,7 +510,7 @@ static void waitcodec(struct ac97_codec *codec)
 
 /* --------------------------------------------------------------------- */
 
-extern inline void stop_adc(struct it8172_state *s)
+static inline void stop_adc(struct it8172_state *s)
 {
     struct dmabuf* db = &s->dma_adc;
     unsigned long flags;
@@ -534,7 +534,7 @@ extern inline void stop_adc(struct it8172_state *s)
     spin_unlock_irqrestore(&s->lock, flags);
 }	
 
-extern inline void stop_dac(struct it8172_state *s)
+static inline void stop_dac(struct it8172_state *s)
 {
     struct dmabuf* db = &s->dma_dac;
     unsigned long flags;
@@ -633,7 +633,7 @@ static void start_adc(struct it8172_state *s)
 #define DMABUF_DEFAULTORDER (17-PAGE_SHIFT)
 #define DMABUF_MINORDER 1
 
-extern inline void dealloc_dmabuf(struct it8172_state *s, struct dmabuf *db)
+static inline void dealloc_dmabuf(struct it8172_state *s, struct dmabuf *db)
 {
     struct page *page, *pend;
 
@@ -709,7 +709,7 @@ static int prog_dmabuf(struct it8172_state *s, struct dmabuf *db,
     return 0;
 }
 
-extern inline int prog_dmabuf_adc(struct it8172_state *s)
+static inline int prog_dmabuf_adc(struct it8172_state *s)
 {
     stop_adc(s);
     return prog_dmabuf(s, &s->dma_adc, s->adcrate,
@@ -717,7 +717,7 @@ extern inline int prog_dmabuf_adc(struct it8172_state *s)
 		       IT_AC_CAPCC);
 }
 
-extern inline int prog_dmabuf_dac(struct it8172_state *s)
+static inline int prog_dmabuf_dac(struct it8172_state *s)
 {
     stop_dac(s);
     return prog_dmabuf(s, &s->dma_dac, s->dacrate,

sound/oss/sound_config.h

@@ -113,14 +113,14 @@ struct channel_info {
 
 #if OPEN_READ == FMODE_READ && OPEN_WRITE == FMODE_WRITE
 
-extern __inline__ int translate_mode(struct file *file)
+static inline int translate_mode(struct file *file)
 {
 	return file->f_mode;
 }
 
 #else
 
-extern __inline__ int translate_mode(struct file *file)
+static inline int translate_mode(struct file *file)
 {
 	return ((file->f_mode & FMODE_READ) ? OPEN_READ : 0) |
 		((file->f_mode & FMODE_WRITE) ? OPEN_WRITE : 0);

sound/pci/ens1370.c

@@ -593,7 +593,7 @@ static void snd_es1371_codec_write(ac97_t *ac97,
 		}
 		spin_unlock_irqrestore(&ensoniq->reg_lock, flags);
 	}
-	snd_printk("codec write timeout at 0x%lx [0x%x]\n", ES_REG(ensoniq, 1371_CODEC), inl(ES_REG(ensoniq, 1371_CODEC)));
+	snd_printk("codec write timeout at 0x%lx [0x%lx]\n", ES_REG(ensoniq, 1371_CODEC), inl(ES_REG(ensoniq, 1371_CODEC)));
 }
 
 static unsigned short snd_es1371_codec_read(ac97_t *ac97,
@@ -641,14 +641,14 @@ static unsigned short snd_es1371_codec_read(ac97_t *ac97,
 			}
 			spin_unlock_irqrestore(&ensoniq->reg_lock, flags);
 			if (++fail > 10) {
-				snd_printk("codec read timeout (final) at 0x%lx, reg = 0x%x [0x%x]\n", ES_REG(ensoniq, 1371_CODEC), reg, inl(ES_REG(ensoniq, 1371_CODEC)));
+				snd_printk("codec read timeout (final) at 0x%lx, reg = 0x%x [0x%lx]\n", ES_REG(ensoniq, 1371_CODEC), reg, inl(ES_REG(ensoniq, 1371_CODEC)));
 				return 0;
 			}
 			goto __again;
 		}
 		spin_unlock_irqrestore(&ensoniq->reg_lock, flags);
 	}
-	snd_printk("es1371: codec read timeout at 0x%lx [0x%x]\n", ES_REG(ensoniq, 1371_CODEC), inl(ES_REG(ensoniq, 1371_CODEC)));
+	snd_printk("es1371: codec read timeout at 0x%lx [0x%lx]\n", ES_REG(ensoniq, 1371_CODEC), inl(ES_REG(ensoniq, 1371_CODEC)));
 	return 0;
 }