net: stmmac: Add the missing speeds that XGMAC supports

XGMAC supports following speeds:
	- 10G XGMII
	- 5G XGMII
	- 2.5G XGMII
	- 2.5G GMII
	- 1G GMII
	- 100M MII
	- 10M MII

Add them to the stmmac driver.
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Cc: Joao Pinto <jpinto@synopsys.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/stmicro/stmmac/common.h

@@ -392,8 +392,12 @@ struct mac_link {
 	u32 speed100;
 	u32 speed1000;
 	u32 speed2500;
-	u32 speed10000;
 	u32 duplex;
+	struct {
+		u32 speed2500;
+		u32 speed5000;
+		u32 speed10000;
+	} xgmii;
 };
 
 struct mii_regs {

drivers/net/ethernet/stmicro/stmmac/dwxgmac2.h

@@ -15,10 +15,14 @@
 /* MAC Registers */
 #define XGMAC_TX_CONFIG			0x00000000
 #define XGMAC_CONFIG_SS_OFF		29
-#define XGMAC_CONFIG_SS_MASK		GENMASK(30, 29)
+#define XGMAC_CONFIG_SS_MASK		GENMASK(31, 29)
 #define XGMAC_CONFIG_SS_10000		(0x0 << XGMAC_CONFIG_SS_OFF)
-#define XGMAC_CONFIG_SS_2500		(0x2 << XGMAC_CONFIG_SS_OFF)
-#define XGMAC_CONFIG_SS_1000		(0x3 << XGMAC_CONFIG_SS_OFF)
+#define XGMAC_CONFIG_SS_2500_GMII	(0x2 << XGMAC_CONFIG_SS_OFF)
+#define XGMAC_CONFIG_SS_1000_GMII	(0x3 << XGMAC_CONFIG_SS_OFF)
+#define XGMAC_CONFIG_SS_100_MII		(0x4 << XGMAC_CONFIG_SS_OFF)
+#define XGMAC_CONFIG_SS_5000		(0x5 << XGMAC_CONFIG_SS_OFF)
+#define XGMAC_CONFIG_SS_2500		(0x6 << XGMAC_CONFIG_SS_OFF)
+#define XGMAC_CONFIG_SS_10_MII		(0x7 << XGMAC_CONFIG_SS_OFF)
 #define XGMAC_CONFIG_SARC		GENMASK(22, 20)
 #define XGMAC_CONFIG_SARC_SHIFT		20
 #define XGMAC_CONFIG_JD			BIT(16)

drivers/net/ethernet/stmicro/stmmac/dwxgmac2_core.c

@@ -36,7 +36,7 @@ static void dwxgmac2_core_init(struct mac_device_info *hw,
 
 		switch (hw->ps) {
 		case SPEED_10000:
-			tx |= hw->link.speed10000;
+			tx |= hw->link.xgmii.speed10000;
 			break;
 		case SPEED_2500:
 			tx |= hw->link.speed2500;
@@ -381,11 +381,13 @@ int dwxgmac2_setup(struct stmmac_priv *priv)
 		mac->mcast_bits_log2 = ilog2(mac->multicast_filter_bins);
 
 	mac->link.duplex = 0;
-	mac->link.speed10 = 0;
-	mac->link.speed100 = 0;
-	mac->link.speed1000 = XGMAC_CONFIG_SS_1000;
-	mac->link.speed2500 = XGMAC_CONFIG_SS_2500;
-	mac->link.speed10000 = XGMAC_CONFIG_SS_10000;
+	mac->link.speed10 = XGMAC_CONFIG_SS_10_MII;
+	mac->link.speed100 = XGMAC_CONFIG_SS_100_MII;
+	mac->link.speed1000 = XGMAC_CONFIG_SS_1000_GMII;
+	mac->link.speed2500 = XGMAC_CONFIG_SS_2500_GMII;
+	mac->link.xgmii.speed2500 = XGMAC_CONFIG_SS_2500;
+	mac->link.xgmii.speed5000 = XGMAC_CONFIG_SS_5000;
+	mac->link.xgmii.speed10000 = XGMAC_CONFIG_SS_10000;
 	mac->link.speed_mask = XGMAC_CONFIG_SS_MASK;
 
 	mac->mii.addr = XGMAC_MDIO_ADDR;

drivers/net/ethernet/stmicro/stmmac/stmmac_main.c

@@ -805,14 +805,43 @@ static void stmmac_validate(struct phylink_config *config,
 			    struct phylink_link_state *state)
 {
 	struct stmmac_priv *priv = netdev_priv(to_net_dev(config->dev));
+	__ETHTOOL_DECLARE_LINK_MODE_MASK(mac_supported) = { 0, };
 	__ETHTOOL_DECLARE_LINK_MODE_MASK(mask) = { 0, };
 	int tx_cnt = priv->plat->tx_queues_to_use;
 	int max_speed = priv->plat->max_speed;
 
+	phylink_set(mac_supported, 10baseT_Half);
+	phylink_set(mac_supported, 10baseT_Full);
+	phylink_set(mac_supported, 100baseT_Half);
+	phylink_set(mac_supported, 100baseT_Full);
+
+	phylink_set(mac_supported, Autoneg);
+	phylink_set(mac_supported, Pause);
+	phylink_set(mac_supported, Asym_Pause);
+	phylink_set_port_modes(mac_supported);
+
+	if (priv->plat->has_gmac ||
+	    priv->plat->has_gmac4 ||
+	    priv->plat->has_xgmac) {
+		phylink_set(mac_supported, 1000baseT_Half);
+		phylink_set(mac_supported, 1000baseT_Full);
+		phylink_set(mac_supported, 1000baseKX_Full);
+	}
+
 	/* Cut down 1G if asked to */
 	if ((max_speed > 0) && (max_speed < 1000)) {
 		phylink_set(mask, 1000baseT_Full);
 		phylink_set(mask, 1000baseX_Full);
+	} else if (priv->plat->has_xgmac) {
+		phylink_set(mac_supported, 2500baseT_Full);
+		phylink_set(mac_supported, 5000baseT_Full);
+		phylink_set(mac_supported, 10000baseSR_Full);
+		phylink_set(mac_supported, 10000baseLR_Full);
+		phylink_set(mac_supported, 10000baseER_Full);
+		phylink_set(mac_supported, 10000baseLRM_Full);
+		phylink_set(mac_supported, 10000baseT_Full);
+		phylink_set(mac_supported, 10000baseKX4_Full);
+		phylink_set(mac_supported, 10000baseKR_Full);
 	}
 
 	/* Half-Duplex can only work with single queue */
@@ -822,7 +851,12 @@ static void stmmac_validate(struct phylink_config *config,
 		phylink_set(mask, 1000baseT_Half);
 	}
 
-	bitmap_andnot(supported, supported, mask, __ETHTOOL_LINK_MODE_MASK_NBITS);
+	bitmap_and(supported, supported, mac_supported,
+		   __ETHTOOL_LINK_MODE_MASK_NBITS);
+	bitmap_andnot(supported, supported, mask,
+		      __ETHTOOL_LINK_MODE_MASK_NBITS);
+	bitmap_and(state->advertising, state->advertising, mac_supported,
+		   __ETHTOOL_LINK_MODE_MASK_NBITS);
 	bitmap_andnot(state->advertising, state->advertising, mask,
 		      __ETHTOOL_LINK_MODE_MASK_NBITS);
 }
@@ -842,7 +876,25 @@ static void stmmac_mac_config(struct phylink_config *config, unsigned int mode,
 	ctrl = readl(priv->ioaddr + MAC_CTRL_REG);
 	ctrl &= ~priv->hw->link.speed_mask;
 
+	if (state->interface == PHY_INTERFACE_MODE_USXGMII) {
 		switch (state->speed) {
+		case SPEED_10000:
+			ctrl |= priv->hw->link.xgmii.speed10000;
+			break;
+		case SPEED_5000:
+			ctrl |= priv->hw->link.xgmii.speed5000;
+			break;
+		case SPEED_2500:
+			ctrl |= priv->hw->link.xgmii.speed2500;
+			break;
+		default:
+			return;
+		}
+	} else {
+		switch (state->speed) {
+		case SPEED_2500:
+			ctrl |= priv->hw->link.speed2500;
+			break;
 		case SPEED_1000:
 			ctrl |= priv->hw->link.speed1000;
 			break;
@@ -855,6 +907,7 @@ static void stmmac_mac_config(struct phylink_config *config, unsigned int mode,
 		default:
 			return;
 		}
+	}
 
 	priv->speed = state->speed;