Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc:
  mmc: extend ricoh_mmc to support Ricoh RL5c476
  at91_mci: use generic GPIO calls
  sdhci: add num index for multi controllers case
  MAINTAINERS: remove non-existant URLs
  mmc: remove sdhci and mmc_spi experimental markers
  mmc: Handle suspend/resume in Ricoh MMC disabler

MAINTAINERS

@@ -2682,7 +2682,6 @@ MOTOROLA IMX MMC/SD HOST CONTROLLER INTERFACE DRIVER
 P:	Pavel Pisa
 M:	ppisa@pikron.com
 L:	linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
-W:	http://mmc.drzeus.cx/wiki/Controllers/Freescale/SDHC
 S:	Maintained
 
 MOUSE AND MISC DEVICES [GENERAL]
@@ -3716,7 +3715,6 @@ SECURE DIGITAL HOST CONTROLLER INTERFACE DRIVER
 P:	Pierre Ossman
 M:	drzeus-sdhci@drzeus.cx
 L:	sdhci-devel@list.drzeus.cx
-W:	http://mmc.drzeus.cx/wiki/Linux/Drivers/sdhci
 S:	Maintained
 
 SKGE, SKY2 10/100/1000 GIGABIT ETHERNET DRIVERS
@@ -4286,7 +4284,6 @@ W83L51xD SD/MMC CARD INTERFACE DRIVER
 P:	Pierre Ossman
 M:	drzeus-wbsd@drzeus.cx
 L:	linux-kernel@vger.kernel.org
-W:	http://projects.drzeus.cx/wbsd
 S:	Maintained
 
 WATCHDOG DEVICE DRIVERS

drivers/mmc/host/Kconfig

@@ -25,8 +25,8 @@ config MMC_PXA
 	  If unsure, say N.
 
 config MMC_SDHCI
-	tristate "Secure Digital Host Controller Interface support  (EXPERIMENTAL)"
-	depends on PCI && EXPERIMENTAL
+	tristate "Secure Digital Host Controller Interface support"
+	depends on PCI
 	help
 	  This select the generic Secure Digital Host Controller Interface.
 	  It is used by manufacturers such as Texas Instruments(R), Ricoh(R)
@@ -118,8 +118,8 @@ config MMC_TIFM_SD
 	  module will be called tifm_sd.
 
 config MMC_SPI
-	tristate "MMC/SD over SPI (EXPERIMENTAL)"
-	depends on MMC && SPI_MASTER && !HIGHMEM && EXPERIMENTAL
+	tristate "MMC/SD over SPI"
+	depends on MMC && SPI_MASTER && !HIGHMEM
 	select CRC7
 	select CRC_ITU_T
 	help

drivers/mmc/host/at91_mci.c

@@ -70,10 +70,11 @@
 
 #include <asm/io.h>
 #include <asm/irq.h>
+#include <asm/gpio.h>
+
 #include <asm/mach/mmc.h>
 #include <asm/arch/board.h>
 #include <asm/arch/cpu.h>
-#include <asm/arch/gpio.h>
 #include <asm/arch/at91_mci.h>
 
 #define DRIVER_NAME "at91_mci"
@@ -659,11 +660,11 @@ static void at91_mci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 	if (host->board->vcc_pin) {
 		switch (ios->power_mode) {
 			case MMC_POWER_OFF:
-				at91_set_gpio_value(host->board->vcc_pin, 0);
+				gpio_set_value(host->board->vcc_pin, 0);
 				break;
 			case MMC_POWER_UP:
 			case MMC_POWER_ON:
-				at91_set_gpio_value(host->board->vcc_pin, 1);
+				gpio_set_value(host->board->vcc_pin, 1);
 				break;
 		}
 	}
@@ -768,7 +769,7 @@ static irqreturn_t at91_mci_irq(int irq, void *devid)
 static irqreturn_t at91_mmc_det_irq(int irq, void *_host)
 {
 	struct at91mci_host *host = _host;
-	int present = !at91_get_gpio_value(irq);
+	int present = !gpio_get_value(irq_to_gpio(irq));
 
 	/*
 	 * we expect this irq on both insert and remove,
@@ -793,7 +794,7 @@ static int at91_mci_get_ro(struct mmc_host *mmc)
 	struct at91mci_host *host = mmc_priv(mmc);
 
 	if (host->board->wp_pin) {
-		read_only = at91_get_gpio_value(host->board->wp_pin);
+		read_only = gpio_get_value(host->board->wp_pin);
 		printk(KERN_WARNING "%s: card is %s\n", mmc_hostname(mmc),
 				(read_only ? "read-only" : "read-write") );
 	}
@@ -820,8 +821,6 @@ static int __init at91_mci_probe(struct platform_device *pdev)
 	struct resource *res;
 	int ret;
 
-	pr_debug("Probe MCI devices\n");
-
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (!res)
 		return -ENXIO;
@@ -831,9 +830,9 @@ static int __init at91_mci_probe(struct platform_device *pdev)
 
 	mmc = mmc_alloc_host(sizeof(struct at91mci_host), &pdev->dev);
 	if (!mmc) {
-		pr_debug("Failed to allocate mmc host\n");
-		release_mem_region(res->start, res->end - res->start + 1);
-		return -ENOMEM;
+		ret = -ENOMEM;
+		dev_dbg(&pdev->dev, "couldn't allocate mmc host\n");
+		goto fail6;
 	}
 
 	mmc->ops = &at91_mci_ops;
@@ -853,19 +852,44 @@ static int __init at91_mci_probe(struct platform_device *pdev)
 		if (cpu_is_at91sam9260() || cpu_is_at91sam9263())
 			mmc->caps |= MMC_CAP_4_BIT_DATA;
 		else
-			printk("AT91 MMC: 4 wire bus mode not supported"
+			dev_warn(&pdev->dev, "4 wire bus mode not supported"
 				" - using 1 wire\n");
 	}
 
+	/*
+	 * Reserve GPIOs ... board init code makes sure these pins are set
+	 * up as GPIOs with the right direction (input, except for vcc)
+	 */
+	if (host->board->det_pin) {
+		ret = gpio_request(host->board->det_pin, "mmc_detect");
+		if (ret < 0) {
+			dev_dbg(&pdev->dev, "couldn't claim card detect pin\n");
+			goto fail5;
+		}
+	}
+	if (host->board->wp_pin) {
+		ret = gpio_request(host->board->wp_pin, "mmc_wp");
+		if (ret < 0) {
+			dev_dbg(&pdev->dev, "couldn't claim wp sense pin\n");
+			goto fail4;
+		}
+	}
+	if (host->board->vcc_pin) {
+		ret = gpio_request(host->board->vcc_pin, "mmc_vcc");
+		if (ret < 0) {
+			dev_dbg(&pdev->dev, "couldn't claim vcc switch pin\n");
+			goto fail3;
+		}
+	}
+
 	/*
 	 * Get Clock
 	 */
 	host->mci_clk = clk_get(&pdev->dev, "mci_clk");
 	if (IS_ERR(host->mci_clk)) {
-		printk(KERN_ERR "AT91 MMC: no clock defined.\n");
-		mmc_free_host(mmc);
-		release_mem_region(res->start, res->end - res->start + 1);
-		return -ENODEV;
+		ret = -ENODEV;
+		dev_dbg(&pdev->dev, "no mci_clk?\n");
+		goto fail2;
 	}
 
 	/*
@@ -873,10 +897,8 @@ static int __init at91_mci_probe(struct platform_device *pdev)
 	 */
 	host->baseaddr = ioremap(res->start, res->end - res->start + 1);
 	if (!host->baseaddr) {
-		clk_put(host->mci_clk);
-		mmc_free_host(mmc);
-		release_mem_region(res->start, res->end - res->start + 1);
-		return -ENOMEM;
+		ret = -ENOMEM;
+		goto fail1;
 	}
 
 	/*
@@ -890,15 +912,11 @@ static int __init at91_mci_probe(struct platform_device *pdev)
 	 * Allocate the MCI interrupt
 	 */
 	host->irq = platform_get_irq(pdev, 0);
-	ret = request_irq(host->irq, at91_mci_irq, IRQF_SHARED, DRIVER_NAME, host);
+	ret = request_irq(host->irq, at91_mci_irq, IRQF_SHARED,
+			mmc_hostname(mmc), host);
 	if (ret) {
-		printk(KERN_ERR "AT91 MMC: Failed to request MCI interrupt\n");
-		clk_disable(host->mci_clk);
-		clk_put(host->mci_clk);
-		mmc_free_host(mmc);
-		iounmap(host->baseaddr);
-		release_mem_region(res->start, res->end - res->start + 1);
-		return ret;
+		dev_dbg(&pdev->dev, "request MCI interrupt failed\n");
+		goto fail0;
 	}
 
 	platform_set_drvdata(pdev, mmc);
@@ -907,8 +925,7 @@ static int __init at91_mci_probe(struct platform_device *pdev)
 	 * Add host to MMC layer
 	 */
 	if (host->board->det_pin) {
-		host->present = !at91_get_gpio_value(host->board->det_pin);
-		device_init_wakeup(&pdev->dev, 1);
+		host->present = !gpio_get_value(host->board->det_pin);
 	}
 	else
 		host->present = -1;
@@ -919,15 +936,38 @@ static int __init at91_mci_probe(struct platform_device *pdev)
 	 * monitor card insertion/removal if we can
 	 */
 	if (host->board->det_pin) {
-		ret = request_irq(host->board->det_pin, at91_mmc_det_irq,
-				0, DRIVER_NAME, host);
+		ret = request_irq(gpio_to_irq(host->board->det_pin),
+				at91_mmc_det_irq, 0, mmc_hostname(mmc), host);
 		if (ret)
-			printk(KERN_ERR "AT91 MMC: Couldn't allocate MMC detect irq\n");
+			dev_warn(&pdev->dev, "request MMC detect irq failed\n");
+		else
+			device_init_wakeup(&pdev->dev, 1);
 	}
 
 	pr_debug("Added MCI driver\n");
 
 	return 0;
+
+fail0:
+	clk_disable(host->mci_clk);
+	iounmap(host->baseaddr);
+fail1:
+	clk_put(host->mci_clk);
+fail2:
+	if (host->board->vcc_pin)
+		gpio_free(host->board->vcc_pin);
+fail3:
+	if (host->board->wp_pin)
+		gpio_free(host->board->wp_pin);
+fail4:
+	if (host->board->det_pin)
+		gpio_free(host->board->det_pin);
+fail5:
+	mmc_free_host(mmc);
+fail6:
+	release_mem_region(res->start, res->end - res->start + 1);
+	dev_err(&pdev->dev, "probe failed, err %d\n", ret);
+	return ret;
 }
 
 /*
@@ -945,9 +985,10 @@ static int __exit at91_mci_remove(struct platform_device *pdev)
 	host = mmc_priv(mmc);
 
 	if (host->board->det_pin) {
+		if (device_can_wakeup(&pdev->dev))
+			free_irq(gpio_to_irq(host->board->det_pin), host);
 		device_init_wakeup(&pdev->dev, 0);
-		free_irq(host->board->det_pin, host);
-		cancel_delayed_work(&host->mmc->detect);
+		gpio_free(host->board->det_pin);
 	}
 
 	at91_mci_disable(host);
@@ -957,6 +998,11 @@ static int __exit at91_mci_remove(struct platform_device *pdev)
 	clk_disable(host->mci_clk);			/* Disable the peripheral clock */
 	clk_put(host->mci_clk);
 
+	if (host->board->vcc_pin)
+		gpio_free(host->board->vcc_pin);
+	if (host->board->wp_pin)
+		gpio_free(host->board->wp_pin);
+
 	iounmap(host->baseaddr);
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	release_mem_region(res->start, res->end - res->start + 1);

drivers/mmc/host/ricoh_mmc.c

@@ -41,10 +41,91 @@ static const struct pci_device_id pci_ids[] __devinitdata = {
 
 MODULE_DEVICE_TABLE(pci, pci_ids);
 
+static int ricoh_mmc_disable(struct pci_dev *fw_dev)
+{
+	u8 write_enable;
+	u8 write_target;
+	u8 disable;
+
+	if (fw_dev->device == PCI_DEVICE_ID_RICOH_RL5C476) {
+		/* via RL5C476 */
+
+		pci_read_config_byte(fw_dev, 0xB7, &disable);
+		if (disable & 0x02) {
+			printk(KERN_INFO DRIVER_NAME
+				": Controller already disabled. " \
+				"Nothing to do.\n");
+			return -ENODEV;
+		}
+
+		pci_read_config_byte(fw_dev, 0x8E, &write_enable);
+		pci_write_config_byte(fw_dev, 0x8E, 0xAA);
+		pci_read_config_byte(fw_dev, 0x8D, &write_target);
+		pci_write_config_byte(fw_dev, 0x8D, 0xB7);
+		pci_write_config_byte(fw_dev, 0xB7, disable | 0x02);
+		pci_write_config_byte(fw_dev, 0x8E, write_enable);
+		pci_write_config_byte(fw_dev, 0x8D, write_target);
+	} else {
+		/* via R5C832 */
+
+		pci_read_config_byte(fw_dev, 0xCB, &disable);
+		if (disable & 0x02) {
+			printk(KERN_INFO DRIVER_NAME
+			       ": Controller already disabled. " \
+				"Nothing to do.\n");
+			return -ENODEV;
+		}
+
+		pci_read_config_byte(fw_dev, 0xCA, &write_enable);
+		pci_write_config_byte(fw_dev, 0xCA, 0x57);
+		pci_write_config_byte(fw_dev, 0xCB, disable | 0x02);
+		pci_write_config_byte(fw_dev, 0xCA, write_enable);
+	}
+
+	printk(KERN_INFO DRIVER_NAME
+	       ": Controller is now disabled.\n");
+
+	return 0;
+}
+
+static int ricoh_mmc_enable(struct pci_dev *fw_dev)
+{
+	u8 write_enable;
+	u8 write_target;
+	u8 disable;
+
+	if (fw_dev->device == PCI_DEVICE_ID_RICOH_RL5C476) {
+		/* via RL5C476 */
+
+		pci_read_config_byte(fw_dev, 0x8E, &write_enable);
+		pci_write_config_byte(fw_dev, 0x8E, 0xAA);
+		pci_read_config_byte(fw_dev, 0x8D, &write_target);
+		pci_write_config_byte(fw_dev, 0x8D, 0xB7);
+		pci_read_config_byte(fw_dev, 0xB7, &disable);
+		pci_write_config_byte(fw_dev, 0xB7, disable & ~0x02);
+		pci_write_config_byte(fw_dev, 0x8E, write_enable);
+		pci_write_config_byte(fw_dev, 0x8D, write_target);
+	} else {
+		/* via R5C832 */
+
+		pci_read_config_byte(fw_dev, 0xCA, &write_enable);
+		pci_read_config_byte(fw_dev, 0xCB, &disable);
+		pci_write_config_byte(fw_dev, 0xCA, 0x57);
+		pci_write_config_byte(fw_dev, 0xCB, disable & ~0x02);
+		pci_write_config_byte(fw_dev, 0xCA, write_enable);
+	}
+
+	printk(KERN_INFO DRIVER_NAME
+	       ": Controller is now re-enabled.\n");
+
+	return 0;
+}
+
 static int __devinit ricoh_mmc_probe(struct pci_dev *pdev,
 				     const struct pci_device_id *ent)
 {
 	u8 rev;
+	u8 ctrlfound = 0;
 
 	struct pci_dev *fw_dev = NULL;
 
@@ -58,34 +139,38 @@ static int __devinit ricoh_mmc_probe(struct pci_dev *pdev,
 		pci_name(pdev), (int)pdev->vendor, (int)pdev->device,
 		(int)rev);
 
-	while ((fw_dev = pci_get_device(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_R5C832, fw_dev))) {
+	while ((fw_dev =
+		pci_get_device(PCI_VENDOR_ID_RICOH,
+			PCI_DEVICE_ID_RICOH_RL5C476, fw_dev))) {
 		if (PCI_SLOT(pdev->devfn) == PCI_SLOT(fw_dev->devfn) &&
 		    pdev->bus == fw_dev->bus) {
-			u8 write_enable;
-			u8 disable;
-
-			pci_read_config_byte(fw_dev, 0xCB, &disable);
-			if (disable & 0x02) {
-				printk(KERN_INFO DRIVER_NAME
-				       ": Controller already disabled. Nothing to do.\n");
+			if (ricoh_mmc_disable(fw_dev) != 0)
 				return -ENODEV;
+
+			pci_set_drvdata(pdev, fw_dev);
+
+			++ctrlfound;
+			break;
+		}
 	}
 
-			pci_read_config_byte(fw_dev, 0xCA, &write_enable);
-			pci_write_config_byte(fw_dev, 0xCA, 0x57);
-			pci_write_config_byte(fw_dev, 0xCB, disable | 0x02);
-			pci_write_config_byte(fw_dev, 0xCA, write_enable);
+	fw_dev = NULL;
 
-			pci_set_drvdata(pdev, fw_dev);
+	while (!ctrlfound &&
+	    (fw_dev = pci_get_device(PCI_VENDOR_ID_RICOH,
+					PCI_DEVICE_ID_RICOH_R5C832, fw_dev))) {
+		if (PCI_SLOT(pdev->devfn) == PCI_SLOT(fw_dev->devfn) &&
+		    pdev->bus == fw_dev->bus) {
+			if (ricoh_mmc_disable(fw_dev) != 0)
+				return -ENODEV;
 
-			printk(KERN_INFO DRIVER_NAME
-			       ": Controller is now disabled.\n");
+			pci_set_drvdata(pdev, fw_dev);
 
-			break;
+			++ctrlfound;
 		}
 	}
 
-	if (pci_get_drvdata(pdev) == NULL) {
+	if (!ctrlfound) {
 		printk(KERN_WARNING DRIVER_NAME
 		       ": Main firewire function not found. Cannot disable controller.\n");
 		return -ENODEV;
@@ -96,30 +181,51 @@ static int __devinit ricoh_mmc_probe(struct pci_dev *pdev,
 
 static void __devexit ricoh_mmc_remove(struct pci_dev *pdev)
 {
-	u8 write_enable;
-	u8 disable;
 	struct pci_dev *fw_dev = NULL;
 
 	fw_dev = pci_get_drvdata(pdev);
 	BUG_ON(fw_dev == NULL);
 
-	pci_read_config_byte(fw_dev, 0xCA, &write_enable);
-	pci_read_config_byte(fw_dev, 0xCB, &disable);
-	pci_write_config_byte(fw_dev, 0xCA, 0x57);
-	pci_write_config_byte(fw_dev, 0xCB, disable & ~0x02);
-	pci_write_config_byte(fw_dev, 0xCA, write_enable);
-
-	printk(KERN_INFO DRIVER_NAME
-	       ": Controller is now re-enabled.\n");
+	ricoh_mmc_enable(fw_dev);
 
 	pci_set_drvdata(pdev, NULL);
 }
 
+static int ricoh_mmc_suspend(struct pci_dev *pdev, pm_message_t state)
+{
+	struct pci_dev *fw_dev = NULL;
+
+	fw_dev = pci_get_drvdata(pdev);
+	BUG_ON(fw_dev == NULL);
+
+	printk(KERN_INFO DRIVER_NAME ": Suspending.\n");
+
+	ricoh_mmc_enable(fw_dev);
+
+	return 0;
+}
+
+static int ricoh_mmc_resume(struct pci_dev *pdev)
+{
+	struct pci_dev *fw_dev = NULL;
+
+	fw_dev = pci_get_drvdata(pdev);
+	BUG_ON(fw_dev == NULL);
+
+	printk(KERN_INFO DRIVER_NAME ": Resuming.\n");
+
+	ricoh_mmc_disable(fw_dev);
+
+	return 0;
+}
+
 static struct pci_driver ricoh_mmc_driver = {
 	.name = 	DRIVER_NAME,
 	.id_table =	pci_ids,
 	.probe = 	ricoh_mmc_probe,
 	.remove =	__devexit_p(ricoh_mmc_remove),
+	.suspend =	ricoh_mmc_suspend,
+	.resume =	ricoh_mmc_resume,
 };
 
 /*****************************************************************************\

drivers/mmc/host/sdhci.c

@@ -30,6 +30,10 @@
 
 static unsigned int debug_quirks = 0;
 
+/* For multi controllers in one platform case */
+static u16 chip_index = 0;
+static spinlock_t index_lock;
+
 /*
  * Different quirks to handle when the hardware deviates from a strict
  * interpretation of the SDHCI specification.
@@ -1320,7 +1324,7 @@ static int __devinit sdhci_probe_slot(struct pci_dev *pdev, int slot)
 
 	DBG("slot %d at 0x%08lx, irq %d\n", slot, host->addr, host->irq);
 
-	snprintf(host->slot_descr, 20, "sdhci:slot%d", slot);
+	snprintf(host->slot_descr, 20, "sdhc%d:slot%d", chip->index, slot);
 
 	ret = pci_request_region(pdev, host->bar, host->slot_descr);
 	if (ret)
@@ -1585,6 +1589,11 @@ static int __devinit sdhci_probe(struct pci_dev *pdev,
 	chip->num_slots = slots;
 	pci_set_drvdata(pdev, chip);
 
+	/* Add for multi controller case */
+	spin_lock(&index_lock);
+	chip->index = chip_index++;
+	spin_unlock(&index_lock);
+
 	for (i = 0;i < slots;i++) {
 		ret = sdhci_probe_slot(pdev, i);
 		if (ret) {
@@ -1645,6 +1654,8 @@ static int __init sdhci_drv_init(void)
 		": Secure Digital Host Controller Interface driver\n");
 	printk(KERN_INFO DRIVER_NAME ": Copyright(c) Pierre Ossman\n");
 
+	spin_lock_init(&index_lock);
+
 	return pci_register_driver(&sdhci_driver);
 }
 

drivers/mmc/host/sdhci.h

@@ -208,6 +208,7 @@ struct sdhci_chip {
 
 	unsigned long		quirks;
 
+	int			index;		/* Index for chip0, chip1 ...*/
 	int			num_slots;	/* Slots on controller */
 	struct sdhci_host	*hosts[0];	/* Pointers to hosts */
 };