spi: add SPI controller driver for UniPhier SoC

Add SPI controller driver implemented in Socionext UniPhier SoCs.

UniPhier SoCs have two types SPI controllers; SCSSI supports a
single channel, and MCSSI supports multiple channels.
This driver supports SCSSI only.

This controller has 32bit TX/RX FIFO with depth of eight entry,
and supports the SPI master mode only.

This commit is implemented in PIO transfer mode, not DMA transfer.
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Signed-off-by: Keiji Hayashibara <hayashibara.keiji@socionext.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

drivers/spi/Kconfig

@@ -688,6 +688,19 @@ config SPI_TXX9
 	help
 	  SPI driver for Toshiba TXx9 MIPS SoCs
 
+config SPI_UNIPHIER
+	tristate "Socionext UniPhier SPI Controller"
+	depends on (ARCH_UNIPHIER || COMPILE_TEST) && OF
+	help
+	  This enables a driver for the Socionext UniPhier SoC SCSSI SPI controller.
+
+	  UniPhier SoCs have SCSSI and MCSSI SPI controllers.
+	  Every UniPhier SoC has SCSSI which supports single channel.
+	  Older UniPhier Pro4/Pro5 also has MCSSI which support multiple channels.
+	  This driver supports SCSSI only.
+
+	  If your SoC supports SCSSI, say Y here.
+
 config SPI_XCOMM
 	tristate "Analog Devices AD-FMCOMMS1-EBZ SPI-I2C-bridge driver"
 	depends on I2C

drivers/spi/Makefile

@@ -101,6 +101,7 @@ spi-thunderx-objs			:= spi-cavium.o spi-cavium-thunderx.o
 obj-$(CONFIG_SPI_THUNDERX)		+= spi-thunderx.o
 obj-$(CONFIG_SPI_TOPCLIFF_PCH)		+= spi-topcliff-pch.o
 obj-$(CONFIG_SPI_TXX9)			+= spi-txx9.o
+obj-$(CONFIG_SPI_UNIPHIER)		+= spi-uniphier.o
 obj-$(CONFIG_SPI_XCOMM)		+= spi-xcomm.o
 obj-$(CONFIG_SPI_XILINX)		+= spi-xilinx.o
 obj-$(CONFIG_SPI_XLP)			+= spi-xlp.o