drm/amd/display: add odm split logic to scaling calculations

Currently odm scaling calculations are only done when adding initial
odm pipe. Any scaling re-calculations will mess up odm because of this.

This change resolves the problem by updating scaling split logic to
handle odm.
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Eric Yang <eric.yang2@amd.com>
Acked-by: Michael Strauss <Michael.Strauss@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drivers/gpu/drm/amd/display/dc/core/dc_resource.c

@@ -532,6 +532,35 @@ static inline void get_vp_scan_direction(
 		*flip_horz_scan_dir = !*flip_horz_scan_dir;
 }
 
+static void calculate_split_count_and_index(struct pipe_ctx *pipe_ctx, int *split_count, int *split_idx)
+{
+	*split_count = get_num_odm_splits(pipe_ctx);
+	*split_idx = 0;
+	if (*split_count == 0) {
+		/*Check for mpc split*/
+		struct pipe_ctx *split_pipe = pipe_ctx->top_pipe;
+
+		while (split_pipe && split_pipe->plane_state == pipe_ctx->plane_state) {
+			(*split_idx)++;
+			(*split_count)++;
+			split_pipe = split_pipe->top_pipe;
+		}
+		split_pipe = pipe_ctx->bottom_pipe;
+		while (split_pipe && split_pipe->plane_state == pipe_ctx->plane_state) {
+			(*split_count)++;
+			split_pipe = split_pipe->bottom_pipe;
+		}
+	} else {
+		/*Get odm split index*/
+		struct pipe_ctx *split_pipe = pipe_ctx->prev_odm_pipe;
+
+		while (split_pipe) {
+			(*split_idx)++;
+			split_pipe = split_pipe->prev_odm_pipe;
+		}
+	}
+}
+
 static void calculate_viewport(struct pipe_ctx *pipe_ctx)
 {
 	const struct dc_plane_state *plane_state = pipe_ctx->plane_state;
@@ -541,16 +570,16 @@ static void calculate_viewport(struct pipe_ctx *pipe_ctx)
 	struct rect clip, dest;
 	int vpc_div = (data->format == PIXEL_FORMAT_420BPP8
 			|| data->format == PIXEL_FORMAT_420BPP10) ? 2 : 1;
-	bool pri_split = pipe_ctx->bottom_pipe &&
-			pipe_ctx->bottom_pipe->plane_state == pipe_ctx->plane_state;
-	bool sec_split = pipe_ctx->top_pipe &&
-			pipe_ctx->top_pipe->plane_state == pipe_ctx->plane_state;
+	int split_count = 0;
+	int split_idx = 0;
 	bool orthogonal_rotation, flip_y_start, flip_x_start;
 
+	calculate_split_count_and_index(pipe_ctx, &split_count, &split_idx);
+
 	if (stream->view_format == VIEW_3D_FORMAT_SIDE_BY_SIDE ||
 		stream->view_format == VIEW_3D_FORMAT_TOP_AND_BOTTOM) {
-		pri_split = false;
-		sec_split = false;
+		split_count = 0;
+		split_idx = 0;
 	}
 
 	/* The actual clip is an intersection between stream
@@ -609,23 +638,32 @@ static void calculate_viewport(struct pipe_ctx *pipe_ctx)
 	data->viewport.height = clip.height * surf_src.height / dest.height;
 
 	/* Handle split */
-	if (pri_split || sec_split) {
+	if (split_count) {
+		/* extra pixels in the division remainder need to go to pipes after
+		 * the extra pixel index minus one(epimo) defined here as:
+		 */
+		int epimo = 0;
+
 		if (orthogonal_rotation) {
-			if (flip_y_start != pri_split)
-				data->viewport.height /= 2;
-			else {
-				data->viewport.y +=  data->viewport.height / 2;
-				/* Ceil offset pipe */
-				data->viewport.height = (data->viewport.height + 1) / 2;
-			}
+			if (flip_y_start)
+				split_idx = split_count - split_idx;
+
+			epimo = split_count - data->viewport.height % (split_count + 1);
+
+			data->viewport.y += (data->viewport.height / (split_count + 1)) * split_idx;
+			if (split_idx > epimo)
+				data->viewport.y += split_idx - epimo - 1;
+			data->viewport.height = data->viewport.height / (split_count + 1) + (split_idx > epimo ? 1 : 0);
 		} else {
-			if (flip_x_start != pri_split)
-				data->viewport.width /= 2;
-			else {
-				data->viewport.x +=  data->viewport.width / 2;
-				/* Ceil offset pipe */
-				data->viewport.width = (data->viewport.width + 1) / 2;
-			}
+			if (flip_x_start)
+				split_idx = split_count - split_idx;
+
+			epimo = split_count - data->viewport.width % (split_count + 1);
+
+			data->viewport.x += (data->viewport.width / (split_count + 1)) * split_idx;
+			if (split_idx > epimo)
+				data->viewport.x += split_idx - epimo - 1;
+			data->viewport.width = data->viewport.width / (split_count + 1) + (split_idx > epimo ? 1 : 0);
 		}
 	}
 
@@ -644,58 +682,58 @@ static void calculate_recout(struct pipe_ctx *pipe_ctx)
 {
 	const struct dc_plane_state *plane_state = pipe_ctx->plane_state;
 	const struct dc_stream_state *stream = pipe_ctx->stream;
+	struct scaler_data *data = &pipe_ctx->plane_res.scl_data;
 	struct rect surf_clip = plane_state->clip_rect;
-	bool pri_split = pipe_ctx->bottom_pipe &&
-			pipe_ctx->bottom_pipe->plane_state == pipe_ctx->plane_state;
-	bool sec_split = pipe_ctx->top_pipe &&
-			pipe_ctx->top_pipe->plane_state == pipe_ctx->plane_state;
-	bool top_bottom_split = stream->view_format == VIEW_3D_FORMAT_TOP_AND_BOTTOM;
-
-	pipe_ctx->plane_res.scl_data.recout.x = stream->dst.x;
+	bool pri_split_tb = pipe_ctx->bottom_pipe &&
+			pipe_ctx->bottom_pipe->plane_state == pipe_ctx->plane_state &&
+			stream->view_format == VIEW_3D_FORMAT_TOP_AND_BOTTOM;
+	bool sec_split_tb = pipe_ctx->top_pipe &&
+			pipe_ctx->top_pipe->plane_state == pipe_ctx->plane_state &&
+			stream->view_format == VIEW_3D_FORMAT_TOP_AND_BOTTOM;
+	int split_count = 0;
+	int split_idx = 0;
+
+	calculate_split_count_and_index(pipe_ctx, &split_count, &split_idx);
+
+	data->recout.x = stream->dst.x;
 	if (stream->src.x < surf_clip.x)
-		pipe_ctx->plane_res.scl_data.recout.x += (surf_clip.x
-			- stream->src.x) * stream->dst.width
+		data->recout.x += (surf_clip.x - stream->src.x) * stream->dst.width
 						/ stream->src.width;
 
-	pipe_ctx->plane_res.scl_data.recout.width = surf_clip.width *
-			stream->dst.width / stream->src.width;
-	if (pipe_ctx->plane_res.scl_data.recout.width + pipe_ctx->plane_res.scl_data.recout.x >
-			stream->dst.x + stream->dst.width)
-		pipe_ctx->plane_res.scl_data.recout.width =
-			stream->dst.x + stream->dst.width
-						- pipe_ctx->plane_res.scl_data.recout.x;
+	data->recout.width = surf_clip.width * stream->dst.width / stream->src.width;
+	if (data->recout.width + data->recout.x > stream->dst.x + stream->dst.width)
+		data->recout.width = stream->dst.x + stream->dst.width - data->recout.x;
 
-	pipe_ctx->plane_res.scl_data.recout.y = stream->dst.y;
+	data->recout.y = stream->dst.y;
 	if (stream->src.y < surf_clip.y)
-		pipe_ctx->plane_res.scl_data.recout.y += (surf_clip.y
-			- stream->src.y) * stream->dst.height
+		data->recout.y += (surf_clip.y - stream->src.y) * stream->dst.height
 						/ stream->src.height;
 
-	pipe_ctx->plane_res.scl_data.recout.height = surf_clip.height *
-			stream->dst.height / stream->src.height;
-	if (pipe_ctx->plane_res.scl_data.recout.height + pipe_ctx->plane_res.scl_data.recout.y >
-			stream->dst.y + stream->dst.height)
-		pipe_ctx->plane_res.scl_data.recout.height =
-			stream->dst.y + stream->dst.height
-						- pipe_ctx->plane_res.scl_data.recout.y;
+	data->recout.height = surf_clip.height * stream->dst.height / stream->src.height;
+	if (data->recout.height + data->recout.y > stream->dst.y + stream->dst.height)
+		data->recout.height = stream->dst.y + stream->dst.height - data->recout.y;
 
 	/* Handle h & v split, handle rotation using viewport */
-	if (sec_split && top_bottom_split) {
-		pipe_ctx->plane_res.scl_data.recout.y +=
-				pipe_ctx->plane_res.scl_data.recout.height / 2;
+	if (sec_split_tb) {
+		data->recout.y += data->recout.height / 2;
 		/* Floor primary pipe, ceil 2ndary pipe */
-		pipe_ctx->plane_res.scl_data.recout.height =
-				(pipe_ctx->plane_res.scl_data.recout.height + 1) / 2;
-	} else if (pri_split && top_bottom_split)
-		pipe_ctx->plane_res.scl_data.recout.height /= 2;
-	else if (sec_split) {
-		pipe_ctx->plane_res.scl_data.recout.x +=
-				pipe_ctx->plane_res.scl_data.recout.width / 2;
-		/* Ceil offset pipe */
-		pipe_ctx->plane_res.scl_data.recout.width =
-				(pipe_ctx->plane_res.scl_data.recout.width + 1) / 2;
-	} else if (pri_split)
-		pipe_ctx->plane_res.scl_data.recout.width /= 2;
+		data->recout.height = (data->recout.height + 1) / 2;
+	} else if (pri_split_tb)
+		data->recout.height /= 2;
+	else if (split_count) {
+		/* extra pixels in the division remainder need to go to pipes after
+		 * the extra pixel index minus one(epimo) defined here as:
+		 */
+		int epimo = split_count - data->recout.width % (split_count + 1);
+
+		/*no recout offset due to odm */
+		if (!pipe_ctx->next_odm_pipe && !pipe_ctx->prev_odm_pipe) {
+			data->recout.x += (data->recout.width / (split_count + 1)) * split_idx;
+			if (split_idx > epimo)
+				data->recout.x += split_idx - epimo - 1;
+		}
+		data->recout.width = data->recout.width / (split_count + 1) + (split_idx > epimo ? 1 : 0);
+	}
 }
 
 static void calculate_scaling_ratios(struct pipe_ctx *pipe_ctx)
@@ -832,6 +870,7 @@ static void calculate_inits_and_adj_vp(struct pipe_ctx *pipe_ctx)
 {
 	const struct dc_plane_state *plane_state = pipe_ctx->plane_state;
 	const struct dc_stream_state *stream = pipe_ctx->stream;
+	struct pipe_ctx *odm_pipe = pipe_ctx->prev_odm_pipe;
 	struct scaler_data *data = &pipe_ctx->plane_res.scl_data;
 	struct rect src = pipe_ctx->plane_state->src_rect;
 	int recout_skip_h, recout_skip_v, surf_size_h, surf_size_v;
@@ -869,6 +908,12 @@ static void calculate_inits_and_adj_vp(struct pipe_ctx *pipe_ctx)
 					* stream->dst.width / stream->src.width -
 					src.x * plane_state->dst_rect.width / src.width
 					* stream->dst.width / stream->src.width);
+	/*modified recout_skip_h calculation due to odm having no recout offset caused by split*/
+	while (odm_pipe) {
+		recout_skip_h += odm_pipe->plane_res.scl_data.recout.width + odm_pipe->plane_res.scl_data.recout.x;
+		odm_pipe = odm_pipe->prev_odm_pipe;
+	}
+
 	recout_skip_v = data->recout.y - (stream->dst.y + (plane_state->dst_rect.y - stream->src.y)
 					* stream->dst.height / stream->src.height -
 					src.y * plane_state->dst_rect.height / src.height
@@ -1021,6 +1066,8 @@ bool resource_build_scaling_params(struct pipe_ctx *pipe_ctx)
 		store_h_border_left + timing->h_border_right;
 	pipe_ctx->plane_res.scl_data.v_active = timing->v_addressable +
 		timing->v_border_top + timing->v_border_bottom;
+	if (pipe_ctx->next_odm_pipe || pipe_ctx->prev_odm_pipe)
+		pipe_ctx->plane_res.scl_data.h_active /= get_num_odm_splits(pipe_ctx) + 1;
 
 	/* Taps calculations */
 	if (pipe_ctx->plane_res.xfm != NULL)

drivers/gpu/drm/amd/display/dc/dcn20/dcn20_resource.c

@@ -1861,20 +1861,20 @@ void dcn20_populate_dml_writeback_from_context(
 
 }
 
-static int get_num_odm_heads(struct pipe_ctx *pipe)
+int get_num_odm_splits(struct pipe_ctx *pipe)
 {
-	int odm_head_count = 0;
+	int odm_split_count = 0;
 	struct pipe_ctx *next_pipe = pipe->next_odm_pipe;
 	while (next_pipe) {
-		odm_head_count++;
+		odm_split_count++;
 		next_pipe = next_pipe->next_odm_pipe;
 	}
 	pipe = pipe->prev_odm_pipe;
 	while (pipe) {
-		odm_head_count++;
+		odm_split_count++;
 		pipe = pipe->prev_odm_pipe;
 	}
-	return odm_head_count ? odm_head_count + 1 : 0;
+	return odm_split_count;
 }
 
 int dcn20_populate_dml_pipes_from_context(
@@ -1956,8 +1956,8 @@ int dcn20_populate_dml_pipes_from_context(
 		pipes[pipe_cnt].dout.dp_lanes = 4;
 		pipes[pipe_cnt].pipe.dest.vtotal_min = res_ctx->pipe_ctx[i].stream->adjust.v_total_min;
 		pipes[pipe_cnt].pipe.dest.vtotal_max = res_ctx->pipe_ctx[i].stream->adjust.v_total_max;
-		switch (get_num_odm_heads(&res_ctx->pipe_ctx[i])) {
-		case 2:
+		switch (get_num_odm_splits(&res_ctx->pipe_ctx[i])) {
+		case 1:
 			pipes[pipe_cnt].pipe.dest.odm_combine = dm_odm_combine_mode_2to1;
 			break;
 		default:
@@ -2124,18 +2124,22 @@ int dcn20_populate_dml_pipes_from_context(
 			pipes[pipe_cnt].pipe.src.dcc = pln->dcc.enable;
 			pipes[pipe_cnt].pipe.dest.recout_width = scl->recout.width;
 			pipes[pipe_cnt].pipe.dest.recout_height = scl->recout.height;
-			pipes[pipe_cnt].pipe.dest.full_recout_width = scl->recout.width;
 			pipes[pipe_cnt].pipe.dest.full_recout_height = scl->recout.height;
-			if (res_ctx->pipe_ctx[i].bottom_pipe && res_ctx->pipe_ctx[i].bottom_pipe->plane_state == pln) {
-				pipes[pipe_cnt].pipe.dest.full_recout_width +=
-						res_ctx->pipe_ctx[i].bottom_pipe->plane_res.scl_data.recout.width;
-				pipes[pipe_cnt].pipe.dest.full_recout_height +=
-						res_ctx->pipe_ctx[i].bottom_pipe->plane_res.scl_data.recout.height;
-			} else if (res_ctx->pipe_ctx[i].top_pipe && res_ctx->pipe_ctx[i].top_pipe->plane_state == pln) {
-				pipes[pipe_cnt].pipe.dest.full_recout_width +=
-						res_ctx->pipe_ctx[i].top_pipe->plane_res.scl_data.recout.width;
-				pipes[pipe_cnt].pipe.dest.full_recout_height +=
-						res_ctx->pipe_ctx[i].top_pipe->plane_res.scl_data.recout.height;
+			pipes[pipe_cnt].pipe.dest.full_recout_width = scl->recout.width;
+			if (pipes[pipe_cnt].pipe.dest.odm_combine == dm_odm_combine_mode_2to1)
+				pipes[pipe_cnt].pipe.dest.full_recout_width *= 2;
+			else {
+				struct pipe_ctx *split_pipe = res_ctx->pipe_ctx[i].bottom_pipe;
+
+				while (split_pipe && split_pipe->plane_state == pln) {
+					pipes[pipe_cnt].pipe.dest.full_recout_width += split_pipe->plane_res.scl_data.recout.width;
+					split_pipe = split_pipe->bottom_pipe;
+				}
+				split_pipe = res_ctx->pipe_ctx[i].top_pipe;
+				while (split_pipe && split_pipe->plane_state == pln) {
+					pipes[pipe_cnt].pipe.dest.full_recout_width += split_pipe->plane_res.scl_data.recout.width;
+					split_pipe = split_pipe->top_pipe;
+				}
 			}
 
 			pipes[pipe_cnt].pipe.scale_ratio_depth.lb_depth = dm_lb_16;

drivers/gpu/drm/amd/display/dc/dcn20/dcn20_resource.h

@@ -49,6 +49,7 @@ unsigned int dcn20_calc_max_scaled_time(
 		unsigned int time_per_pixel,
 		enum mmhubbub_wbif_mode mode,
 		unsigned int urgent_watermark);
+int get_num_odm_splits(struct pipe_ctx *pipe);
 int dcn20_populate_dml_pipes_from_context(
 		struct dc *dc, struct dc_state *context, display_e2e_pipe_params_st *pipes);
 struct pipe_ctx *dcn20_acquire_idle_pipe_for_layer(