Merge tag 'mfd-for-linus-3.20' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd

Pull MFD updates from Lee Jones:
 "Changes to existing drivers:
   - fixr platform device collision; da9052, wm8994-core
   - regmap configuration amendments; tps65218
   - fix runtime PM deadlock; rtsx_usb
   - remove unused/superfluous code; db8500-prcmu, omap-usb-host
   - enable watchdog timer; lpc_sch
   - add start/stop RX URBs helpers; dln2
   - remove platform device (DT only); max77686, max77802
   - support suspend and resume; dln2
   - add Device Tree support; da9063
   - extra error checking; intel_soc_pmic
   - const'ify all the things; 88pm860x, hi6421-pmic, intel_soc_pmic,
                               max77686, lm3533, retu, pcf50633,
                               davinci_voicecodec, smsc-ece1099,
                               tps65218, mc13xxx, tps65217, twl-core,
                               twl6040

  New drivers/supported devices:
   - new driver for Richtek RT5033
   - new driver for DA9150 Charger and FuelGauge
   - new driver for Qualcomm Resource Power Manager (RPM)
   - add support for the ir-clk into sun6i-prcm
   - add support for FuelGauge into axp20x"

* tag 'mfd-for-linus-3.20' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (32 commits)
  mfd: intel_soc_pmic: Add missing error check for devm_kzalloc
  mfd: rtsx_usb: Defer autosuspend while card exists
  mfd: devicetree: Add bindings for DA9063
  mfd: da9063: Add device tree support
  regulator: qcom-rpm: Add missing state flag in call to RPM
  mfd: qcom-rpm: Driver for the Qualcomm RPM
  mfd: devicetree: bindings: Add Qualcomm RPM DT binding
  mfd: max77686/802: Remove support for board files
  mfd: omap-usb-host: Remove some unused functions
  mfd: twl6040: Constify struct regmap_config and reg_default array
  mfd: twl-core: Constify struct regmap_config and reg_default array
  mfd: tps65217: Constify struct regmap_config
  mfd: mc13xxx: i2c/spi: Constify struct regmap_config
  mfd: tps65218: Constify struct regmap_config
  mfd: smsc-ece1099: Constify struct regmap_config
  mfd: davinci_voicecodec: Constify struct regmap_config
  mfd: pcf50633: Constify struct regmap_config
  mfd: retu: Constify struct regmap_config
  mfd: lm3533: Constify struct regmap_config
  mfd: max77686: Constify struct regmap_config
  ...

Documentation/devicetree/bindings/mfd/da9063.txt

+* Dialog DA9063 Power Management Integrated Circuit (PMIC)
+
+DA9093 consists of a large and varied group of sub-devices (I2C Only):
+
+Device                   Supply Names    Description
+------                   ------------    -----------
+da9063-regulator        :               : LDOs & BUCKs
+da9063-rtc              :               : Real-Time Clock
+da9063-watchdog         :               : Watchdog
+
+======
+
+Required properties:
+
+- compatible : Should be "dlg,da9063"
+- reg : Specifies the I2C slave address (this defaults to 0x58 but it can be
+  modified to match the chip's OTP settings).
+- interrupt-parent : Specifies the reference to the interrupt controller for
+  the DA9063.
+- interrupts : IRQ line information.
+- interrupt-controller
+
+Sub-nodes:
+
+- regulators : This node defines the settings for the LDOs and BUCKs. The
+  DA9063 regulators are bound using their names listed below:
+
+    bcore1    : BUCK CORE1
+    bcore2    : BUCK CORE2
+    bpro      : BUCK PRO
+    bmem      : BUCK MEM
+    bio       : BUCK IO
+    bperi     : BUCK PERI
+    ldo1      : LDO_1
+    ldo2      : LDO_2
+    ldo3      : LDO_3
+    ldo4      : LDO_4
+    ldo5      : LDO_5
+    ldo6      : LDO_6
+    ldo7      : LDO_7
+    ldo8      : LDO_8
+    ldo9      : LDO_9
+    ldo10     : LDO_10
+    ldo11     : LDO_11
+
+  The component follows the standard regulator framework and the bindings
+  details of individual regulator device can be found in:
+  Documentation/devicetree/bindings/regulator/regulator.txt
+
+- rtc : This node defines settings for the Real-Time Clock associated with
+  the DA9063. There are currently no entries in this binding, however
+  compatible = "dlg,da9063-rtc" should be added if a node is created.
+
+- watchdog : This node defines settings for the Watchdog timer associated
+  with the DA9063. There are currently no entries in this binding, however
+  compatible = "dlg,da9063-watchdog" should be added if a node is created.
+
+
+Example:
+
+	pmic0: da9063@58 {
+		compatible = "dlg,da9063"
+		reg = <0x58>;
+		interrupt-parent = <&gpio6>;
+		interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+
+		rtc {
+			compatible = "dlg,da9063-rtc";
+		};
+
+		wdt {
+			compatible = "dlg,da9063-watchdog";
+		};
+
+		regulators {
+			DA9063_BCORE1: bcore1 {
+				regulator-name = "BCORE1";
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1570000>;
+				regulator-min-microamp = <500000>;
+				regulator-max-microamp = <2000000>;
+				regulator-boot-on;
+			};
+			DA9063_LDO11: ldo11 {
+				regulator-name = "LDO_11";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <3600000>;
+				regulator-boot-on;
+			};
+		};
+	};
+

Documentation/devicetree/bindings/mfd/qcom-rpm.txt

+Qualcomm Resource Power Manager (RPM)
+
+This driver is used to interface with the Resource Power Manager (RPM) found in
+various Qualcomm platforms. The RPM allows each component in the system to vote
+for state of the system resources, such as clocks, regulators and bus
+frequencies.
+
+- compatible:
+	Usage: required
+	Value type: <string>
+	Definition: must be one of:
+		    "qcom,rpm-apq8064"
+		    "qcom,rpm-msm8660"
+		    "qcom,rpm-msm8960"
+
+- reg:
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: base address and size of the RPM's message ram
+
+- interrupts:
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: three entries specifying the RPM's:
+		    1. acknowledgement interrupt
+		    2. error interrupt
+		    3. wakeup interrupt
+
+- interrupt-names:
+	Usage: required
+	Value type: <string-array>
+	Definition: must be the three strings "ack", "err" and "wakeup", in order
+
+- #address-cells:
+	Usage: required
+	Value type: <u32>
+	Definition: must be 1
+
+- #size-cells:
+	Usage: required
+	Value type: <u32>
+	Definition: must be 0
+
+- qcom,ipc:
+	Usage: required
+	Value type: <prop-encoded-array>
+
+	Definition: three entries specifying the outgoing ipc bit used for
+		    signaling the RPM:
+		    - phandle to a syscon node representing the apcs registers
+		    - u32 representing offset to the register within the syscon
+		    - u32 representing the ipc bit within the register
+
+
+= EXAMPLE
+
+	#include <dt-bindings/mfd/qcom-rpm.h>
+
+	rpm@108000 {
+		compatible = "qcom,rpm-msm8960";
+		reg = <0x108000 0x1000>;
+		qcom,ipc = <&apcs 0x8 2>;
+
+		interrupts = <0 19 0>, <0 21 0>, <0 22 0>;
+		interrupt-names = "ack", "err", "wakeup";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+

drivers/mfd/88pm860x-core.c

@@ -1111,7 +1111,7 @@ static int verify_addr(struct i2c_client *i2c)
 	return 0;
 }
 
-static struct regmap_config pm860x_regmap_config = {
+static const struct regmap_config pm860x_regmap_config = {
 	.reg_bits = 8,
 	.val_bits = 8,
 };

drivers/mfd/Kconfig

@@ -195,6 +195,18 @@ config MFD_DA9063
 	  Additional drivers must be enabled in order to use the functionality
 	  of the device.
 
+config MFD_DA9150
+	tristate "Dialog Semiconductor DA9150 Charger Fuel-Gauge chip"
+	depends on I2C=y
+	select MFD_CORE
+	select REGMAP_I2C
+	select REGMAP_IRQ
+	help
+	  This adds support for the DA9150 integrated charger and fuel-gauge
+	  chip. This driver provides common support for accessing the device.
+	  Additional drivers must be enabled in order to use the specific
+	  features of the device.
+
 config MFD_DLN2
 	tristate "Diolan DLN2 support"
 	select MFD_CORE
@@ -417,6 +429,7 @@ config MFD_MAX14577
 config MFD_MAX77686
 	bool "Maxim Semiconductor MAX77686/802 PMIC Support"
 	depends on I2C=y
+	depends on OF
 	select MFD_CORE
 	select REGMAP_I2C
 	select REGMAP_IRQ
@@ -589,6 +602,20 @@ config MFD_PM8921_CORE
 	  Say M here if you want to include support for PM8921 chip as a module.
 	  This will build a module called "pm8921-core".
 
+config MFD_QCOM_RPM
+	tristate "Qualcomm Resource Power Manager (RPM)"
+	depends on ARCH_QCOM && OF
+	help
+	  If you say yes to this option, support will be included for the
+	  Resource Power Manager system found in the Qualcomm 8660, 8960 and
+	  8064 based devices.
+
+	  This is required to access many regulators, clocks and bus
+	  frequencies controlled by the RPM on these devices.
+
+	  Say M here if you want to include support for the Qualcomm RPM as a
+	  module. This will build a module called "qcom_rpm".
+
 config MFD_SPMI_PMIC
 	tristate "Qualcomm SPMI PMICs"
 	depends on ARCH_QCOM || COMPILE_TEST
@@ -623,6 +650,18 @@ config MFD_RTSX_PCI
 	  types of memory cards, such as Memory Stick, Memory Stick Pro,
 	  Secure Digital and MultiMediaCard.
 
+config MFD_RT5033
+	tristate "Richtek RT5033 Power Management IC"
+	depends on I2C=y
+	select MFD_CORE
+	select REGMAP_I2C
+	help
+	  This driver provides for the Richtek RT5033 Power Management IC,
+	  which includes the I2C driver and the Core APIs. This driver provides
+	  common support for accessing the device. The device supports multiple
+	  sub-devices like charger, fuel gauge, flash LED, current source,
+	  LDO and Buck.
+
 config MFD_RTSX_USB
 	tristate "Realtek USB card reader"
 	depends on USB

drivers/mfd/Makefile

@@ -113,7 +113,7 @@ obj-$(CONFIG_MFD_DA9055)	+= da9055.o
 
 da9063-objs			:= da9063-core.o da9063-irq.o da9063-i2c.o
 obj-$(CONFIG_MFD_DA9063)	+= da9063.o
-
+obj-$(CONFIG_MFD_DA9150)	+= da9150-core.o
 obj-$(CONFIG_MFD_MAX14577)	+= max14577.o
 obj-$(CONFIG_MFD_MAX77686)	+= max77686.o
 obj-$(CONFIG_MFD_MAX77693)	+= max77693.o
@@ -153,6 +153,7 @@ obj-$(CONFIG_MFD_SI476X_CORE)	+= si476x-core.o
 obj-$(CONFIG_MFD_CS5535)	+= cs5535-mfd.o
 obj-$(CONFIG_MFD_OMAP_USB_HOST)	+= omap-usb-host.o omap-usb-tll.o
 obj-$(CONFIG_MFD_PM8921_CORE) 	+= pm8921-core.o ssbi.o
+obj-$(CONFIG_MFD_QCOM_RPM)	+= qcom_rpm.o
 obj-$(CONFIG_MFD_SPMI_PMIC)	+= qcom-spmi-pmic.o
 obj-$(CONFIG_TPS65911_COMPARATOR)	+= tps65911-comparator.o
 obj-$(CONFIG_MFD_TPS65090)	+= tps65090.o
@@ -176,6 +177,7 @@ obj-$(CONFIG_MFD_IPAQ_MICRO)	+= ipaq-micro.o
 obj-$(CONFIG_MFD_MENF21BMC)	+= menf21bmc.o
 obj-$(CONFIG_MFD_HI6421_PMIC)	+= hi6421-pmic-core.o
 obj-$(CONFIG_MFD_DLN2)		+= dln2.o
+obj-$(CONFIG_MFD_RT5033)	+= rt5033.o
 
 intel-soc-pmic-objs		:= intel_soc_pmic_core.o intel_soc_pmic_crc.o
 obj-$(CONFIG_INTEL_SOC_PMIC)	+= intel-soc-pmic.o

drivers/mfd/da9063-core.c

@@ -86,6 +86,7 @@ static const struct mfd_cell da9063_devs[] = {
 	},
 	{
 		.name		= DA9063_DRVNAME_WATCHDOG,
+		.of_compatible	= "dlg,da9063-watchdog",
 	},
 	{
 		.name		= DA9063_DRVNAME_HWMON,
@@ -101,6 +102,7 @@ static const struct mfd_cell da9063_devs[] = {
 		.name		= DA9063_DRVNAME_RTC,
 		.num_resources	= ARRAY_SIZE(da9063_rtc_resources),
 		.resources	= da9063_rtc_resources,
+		.of_compatible	= "dlg,da9063-rtc",
 	},
 	{
 		.name		= DA9063_DRVNAME_VIBRATION,

drivers/mfd/da9063-i2c.c

@@ -25,6 +25,9 @@
 #include <linux/mfd/da9063/pdata.h>
 #include <linux/mfd/da9063/registers.h>
 
+#include <linux/of.h>
+#include <linux/regulator/of_regulator.h>
+
 static const struct regmap_range da9063_ad_readable_ranges[] = {
 	{
 		.range_min = DA9063_REG_PAGE_CON,
@@ -203,6 +206,11 @@ static struct regmap_config da9063_regmap_config = {
 	.cache_type = REGCACHE_RBTREE,
 };
 
+static const struct of_device_id da9063_dt_ids[] = {
+	{ .compatible = "dlg,da9063", },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, da9063_dt_ids);
 static int da9063_i2c_probe(struct i2c_client *i2c,
 	const struct i2c_device_id *id)
 {
@@ -257,6 +265,7 @@ static struct i2c_driver da9063_i2c_driver = {
 	.driver = {
 		.name = "da9063",
 		.owner = THIS_MODULE,
+		.of_match_table = of_match_ptr(da9063_dt_ids),
 	},
 	.probe    = da9063_i2c_probe,
 	.remove   = da9063_i2c_remove,

drivers/mfd/da9150-core.c

+/*
+ * DA9150 Core MFD Driver
+ *
+ * Copyright (c) 2014 Dialog Semiconductor
+ *
+ * Author: Adam Thomson <Adam.Thomson.Opensource@diasemi.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/i2c.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/da9150/core.h>
+#include <linux/mfd/da9150/registers.h>
+
+static bool da9150_volatile_reg(struct device *dev, unsigned int reg)
+{
+	switch (reg) {
+	case DA9150_PAGE_CON:
+	case DA9150_STATUS_A:
+	case DA9150_STATUS_B:
+	case DA9150_STATUS_C:
+	case DA9150_STATUS_D:
+	case DA9150_STATUS_E:
+	case DA9150_STATUS_F:
+	case DA9150_STATUS_G:
+	case DA9150_STATUS_H:
+	case DA9150_STATUS_I:
+	case DA9150_STATUS_J:
+	case DA9150_STATUS_K:
+	case DA9150_STATUS_L:
+	case DA9150_STATUS_N:
+	case DA9150_FAULT_LOG_A:
+	case DA9150_FAULT_LOG_B:
+	case DA9150_EVENT_E:
+	case DA9150_EVENT_F:
+	case DA9150_EVENT_G:
+	case DA9150_EVENT_H:
+	case DA9150_CONTROL_B:
+	case DA9150_CONTROL_C:
+	case DA9150_GPADC_MAN:
+	case DA9150_GPADC_RES_A:
+	case DA9150_GPADC_RES_B:
+	case DA9150_ADETVB_CFG_C:
+	case DA9150_ADETD_STAT:
+	case DA9150_ADET_CMPSTAT:
+	case DA9150_ADET_CTRL_A:
+	case DA9150_PPR_TCTR_B:
+	case DA9150_COREBTLD_STAT_A:
+	case DA9150_CORE_DATA_A:
+	case DA9150_CORE_DATA_B:
+	case DA9150_CORE_DATA_C:
+	case DA9150_CORE_DATA_D:
+	case DA9150_CORE2WIRE_STAT_A:
+	case DA9150_FW_CTRL_C:
+	case DA9150_FG_CTRL_B:
+	case DA9150_FW_CTRL_B:
+	case DA9150_GPADC_CMAN:
+	case DA9150_GPADC_CRES_A:
+	case DA9150_GPADC_CRES_B:
+	case DA9150_CC_ICHG_RES_A:
+	case DA9150_CC_ICHG_RES_B:
+	case DA9150_CC_IAVG_RES_A:
+	case DA9150_CC_IAVG_RES_B:
+	case DA9150_TAUX_CTRL_A:
+	case DA9150_TAUX_VALUE_H:
+	case DA9150_TAUX_VALUE_L:
+	case DA9150_TBAT_RES_A:
+	case DA9150_TBAT_RES_B:
+		return true;
+	default:
+		return false;
+	}
+}
+
+static const struct regmap_range_cfg da9150_range_cfg[] = {
+	{
+		.range_min = DA9150_PAGE_CON,
+		.range_max = DA9150_TBAT_RES_B,
+		.selector_reg = DA9150_PAGE_CON,
+		.selector_mask = DA9150_I2C_PAGE_MASK,
+		.selector_shift = DA9150_I2C_PAGE_SHIFT,
+		.window_start = 0,
+		.window_len = 256,
+	},
+};
+
+static struct regmap_config da9150_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+	.ranges = da9150_range_cfg,
+	.num_ranges = ARRAY_SIZE(da9150_range_cfg),
+	.max_register = DA9150_TBAT_RES_B,
+
+	.cache_type = REGCACHE_RBTREE,
+
+	.volatile_reg = da9150_volatile_reg,
+};
+
+u8 da9150_reg_read(struct da9150 *da9150, u16 reg)
+{
+	int val, ret;
+
+	ret = regmap_read(da9150->regmap, reg, &val);
+	if (ret)
+		dev_err(da9150->dev, "Failed to read from reg 0x%x: %d\n",
+			reg, ret);
+
+	return (u8) val;
+}
+EXPORT_SYMBOL_GPL(da9150_reg_read);
+
+void da9150_reg_write(struct da9150 *da9150, u16 reg, u8 val)
+{
+	int ret;
+
+	ret = regmap_write(da9150->regmap, reg, val);
+	if (ret)
+		dev_err(da9150->dev, "Failed to write to reg 0x%x: %d\n",
+			reg, ret);
+}
+EXPORT_SYMBOL_GPL(da9150_reg_write);
+
+void da9150_set_bits(struct da9150 *da9150, u16 reg, u8 mask, u8 val)
+{
+	int ret;
+
+	ret = regmap_update_bits(da9150->regmap, reg, mask, val);
+	if (ret)
+		dev_err(da9150->dev, "Failed to set bits in reg 0x%x: %d\n",
+			reg, ret);
+}
+EXPORT_SYMBOL_GPL(da9150_set_bits);
+
+void da9150_bulk_read(struct da9150 *da9150, u16 reg, int count, u8 *buf)
+{
+	int ret;
+
+	ret = regmap_bulk_read(da9150->regmap, reg, buf, count);
+	if (ret)
+		dev_err(da9150->dev, "Failed to bulk read from reg 0x%x: %d\n",
+			reg, ret);
+}
+EXPORT_SYMBOL_GPL(da9150_bulk_read);
+
+void da9150_bulk_write(struct da9150 *da9150, u16 reg, int count, const u8 *buf)
+{
+	int ret;
+
+	ret = regmap_raw_write(da9150->regmap, reg, buf, count);
+	if (ret)
+		dev_err(da9150->dev, "Failed to bulk write to reg 0x%x %d\n",
+			reg, ret);
+}
+EXPORT_SYMBOL_GPL(da9150_bulk_write);
+
+static struct regmap_irq da9150_irqs[] = {
+	[DA9150_IRQ_VBUS] = {
+		.reg_offset = 0,
+		.mask = DA9150_E_VBUS_MASK,
+	},
+	[DA9150_IRQ_CHG] = {
+		.reg_offset = 0,
+		.mask = DA9150_E_CHG_MASK,
+	},
+	[DA9150_IRQ_TCLASS] = {
+		.reg_offset = 0,
+		.mask = DA9150_E_TCLASS_MASK,
+	},
+	[DA9150_IRQ_TJUNC] = {
+		.reg_offset = 0,
+		.mask = DA9150_E_TJUNC_MASK,
+	},
+	[DA9150_IRQ_VFAULT] = {
+		.reg_offset = 0,
+		.mask = DA9150_E_VFAULT_MASK,
+	},
+	[DA9150_IRQ_CONF] = {
+		.reg_offset = 1,
+		.mask = DA9150_E_CONF_MASK,
+	},
+	[DA9150_IRQ_DAT] = {
+		.reg_offset = 1,
+		.mask = DA9150_E_DAT_MASK,
+	},
+	[DA9150_IRQ_DTYPE] = {
+		.reg_offset = 1,
+		.mask = DA9150_E_DTYPE_MASK,
+	},
+	[DA9150_IRQ_ID] = {
+		.reg_offset = 1,
+		.mask = DA9150_E_ID_MASK,
+	},
+	[DA9150_IRQ_ADP] = {
+		.reg_offset = 1,
+		.mask = DA9150_E_ADP_MASK,
+	},
+	[DA9150_IRQ_SESS_END] = {
+		.reg_offset = 1,
+		.mask = DA9150_E_SESS_END_MASK,
+	},
+	[DA9150_IRQ_SESS_VLD] = {
+		.reg_offset = 1,
+		.mask = DA9150_E_SESS_VLD_MASK,
+	},
+	[DA9150_IRQ_FG] = {
+		.reg_offset = 2,
+		.mask = DA9150_E_FG_MASK,
+	},
+	[DA9150_IRQ_GP] = {
+		.reg_offset = 2,
+		.mask = DA9150_E_GP_MASK,
+	},
+	[DA9150_IRQ_TBAT] = {
+		.reg_offset = 2,
+		.mask = DA9150_E_TBAT_MASK,
+	},
+	[DA9150_IRQ_GPIOA] = {
+		.reg_offset = 2,
+		.mask = DA9150_E_GPIOA_MASK,
+	},
+	[DA9150_IRQ_GPIOB] = {
+		.reg_offset = 2,
+		.mask = DA9150_E_GPIOB_MASK,
+	},
+	[DA9150_IRQ_GPIOC] = {
+		.reg_offset = 2,
+		.mask = DA9150_E_GPIOC_MASK,
+	},
+	[DA9150_IRQ_GPIOD] = {
+		.reg_offset = 2,
+		.mask = DA9150_E_GPIOD_MASK,
+	},
+	[DA9150_IRQ_GPADC] = {
+		.reg_offset = 2,
+		.mask = DA9150_E_GPADC_MASK,
+	},
+	[DA9150_IRQ_WKUP] = {
+		.reg_offset = 3,
+		.mask = DA9150_E_WKUP_MASK,
+	},
+};
+
+static struct regmap_irq_chip da9150_regmap_irq_chip = {
+	.name = "da9150_irq",
+	.status_base = DA9150_EVENT_E,
+	.mask_base = DA9150_IRQ_MASK_E,
+	.ack_base = DA9150_EVENT_E,
+	.num_regs = DA9150_NUM_IRQ_REGS,
+	.irqs = da9150_irqs,
+	.num_irqs = ARRAY_SIZE(da9150_irqs),
+};
+
+static struct resource da9150_gpadc_resources[] = {
+	{
+		.name = "GPADC",
+		.start = DA9150_IRQ_GPADC,
+		.end = DA9150_IRQ_GPADC,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct resource da9150_charger_resources[] = {
+	{
+		.name = "CHG_STATUS",
+		.start = DA9150_IRQ_CHG,
+		.end = DA9150_IRQ_CHG,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.name = "CHG_TJUNC",
+		.start = DA9150_IRQ_TJUNC,
+		.end = DA9150_IRQ_TJUNC,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.name = "CHG_VFAULT",
+		.start = DA9150_IRQ_VFAULT,
+		.end = DA9150_IRQ_VFAULT,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.name = "CHG_VBUS",
+		.start = DA9150_IRQ_VBUS,
+		.end = DA9150_IRQ_VBUS,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct mfd_cell da9150_devs[] = {
+	{
+		.name = "da9150-gpadc",
+		.of_compatible = "dlg,da9150-gpadc",
+		.resources = da9150_gpadc_resources,
+		.num_resources = ARRAY_SIZE(da9150_gpadc_resources),
+	},
+	{
+		.name = "da9150-charger",
+		.of_compatible = "dlg,da9150-charger",
+		.resources = da9150_charger_resources,
+		.num_resources = ARRAY_SIZE(da9150_charger_resources),
+	},
+};
+
+static int da9150_probe(struct i2c_client *client,
+			const struct i2c_device_id *id)
+{
+	struct da9150 *da9150;
+	struct da9150_pdata *pdata = dev_get_platdata(&client->dev);
+	int ret;
+
+	da9150 = devm_kzalloc(&client->dev, sizeof(*da9150), GFP_KERNEL);
+	if (!da9150)
+		return -ENOMEM;
+
+	da9150->dev = &client->dev;
+	da9150->irq = client->irq;
+	i2c_set_clientdata(client, da9150);
+
+	da9150->regmap = devm_regmap_init_i2c(client, &da9150_regmap_config);
+	if (IS_ERR(da9150->regmap)) {
+		ret = PTR_ERR(da9150->regmap);
+		dev_err(da9150->dev, "Failed to allocate register map: %d\n",
+			ret);
+		return ret;
+	}
+
+	da9150->irq_base = pdata ? pdata->irq_base : -1;
+
+	ret = regmap_add_irq_chip(da9150->regmap, da9150->irq,
+				  IRQF_TRIGGER_LOW | IRQF_ONESHOT,
+				  da9150->irq_base, &da9150_regmap_irq_chip,
+				  &da9150->regmap_irq_data);
+	if (ret)
+		return ret;
+
+	da9150->irq_base = regmap_irq_chip_get_base(da9150->regmap_irq_data);
+	enable_irq_wake(da9150->irq);
+
+	ret = mfd_add_devices(da9150->dev, -1, da9150_devs,
+			      ARRAY_SIZE(da9150_devs), NULL,
+			      da9150->irq_base, NULL);
+	if (ret) {
+		dev_err(da9150->dev, "Failed to add child devices: %d\n", ret);
+		regmap_del_irq_chip(da9150->irq, da9150->regmap_irq_data);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int da9150_remove(struct i2c_client *client)
+{
+	struct da9150 *da9150 = i2c_get_clientdata(client);
+
+	regmap_del_irq_chip(da9150->irq, da9150->regmap_irq_data);
+	mfd_remove_devices(da9150->dev);
+
+	return 0;
+}
+
+static void da9150_shutdown(struct i2c_client *client)
+{
+	struct da9150 *da9150 = i2c_get_clientdata(client);
+
+	/* Make sure we have a wakup source for the device */
+	da9150_set_bits(da9150, DA9150_CONFIG_D,
+			DA9150_WKUP_PM_EN_MASK,
+			DA9150_WKUP_PM_EN_MASK);
+
+	/* Set device to DISABLED mode */
+	da9150_set_bits(da9150, DA9150_CONTROL_C,
+			DA9150_DISABLE_MASK, DA9150_DISABLE_MASK);
+}
+
+static const struct i2c_device_id da9150_i2c_id[] = {
+	{ "da9150", },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, da9150_i2c_id);
+
+static const struct of_device_id da9150_of_match[] = {
+	{ .compatible = "dlg,da9150", },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, da9150_of_match);
+
+static struct i2c_driver da9150_driver = {
+	.driver	= {
+		.name	= "da9150",
+		.of_match_table = of_match_ptr(da9150_of_match),
+	},
+	.probe		= da9150_probe,
+	.remove		= da9150_remove,
+	.shutdown	= da9150_shutdown,
+	.id_table	= da9150_i2c_id,
+};
+
+module_i2c_driver(da9150_driver);
+
+MODULE_DESCRIPTION("MFD Core Driver for DA9150");
+MODULE_AUTHOR("Adam Thomson <Adam.Thomson.Opensource@diasemi.com>");
+MODULE_LICENSE("GPL");

drivers/mfd/davinci_voicecodec.c

@@ -33,7 +33,7 @@
 
 #include <linux/mfd/davinci_voicecodec.h>
 
-static struct regmap_config davinci_vc_regmap = {
+static const struct regmap_config davinci_vc_regmap = {
 	.reg_bits = 32,
 	.val_bits = 32,
 };

drivers/mfd/db8500-prcmu.c

@@ -674,15 +674,6 @@ bool prcmu_has_arm_maxopp(void)
 		PRCM_AVS_ISMODEENABLE_MASK) == PRCM_AVS_ISMODEENABLE_MASK;
 }
 
-/**
- * prcmu_get_boot_status - PRCMU boot status checking
- * Returns: the current PRCMU boot status
- */
-int prcmu_get_boot_status(void)
-{
-	return readb(tcdm_base + PRCM_BOOT_STATUS);
-}
-
 /**
  * prcmu_set_rc_a2p - This function is used to run few power state sequences
  * @val: Value to be set, i.e. transition requested

drivers/mfd/dln2.c

@@ -587,12 +587,19 @@ static void dln2_free_rx_urbs(struct dln2_dev *dln2)
 	int i;
 
 	for (i = 0; i < DLN2_MAX_URBS; i++) {
-		usb_kill_urb(dln2->rx_urb[i]);
 		usb_free_urb(dln2->rx_urb[i]);
 		kfree(dln2->rx_buf[i]);
 	}
 }
 
+static void dln2_stop_rx_urbs(struct dln2_dev *dln2)
+{
+	int i;
+
+	for (i = 0; i < DLN2_MAX_URBS; i++)
+		usb_kill_urb(dln2->rx_urb[i]);
+}
+
 static void dln2_free(struct dln2_dev *dln2)
 {
 	dln2_free_rx_urbs(dln2);
@@ -604,9 +611,7 @@ static int dln2_setup_rx_urbs(struct dln2_dev *dln2,
 			      struct usb_host_interface *hostif)
 {
 	int i;
-	int ret;
 	const int rx_max_size = DLN2_RX_BUF_SIZE;
-	struct device *dev = &dln2->interface->dev;
 
 	for (i = 0; i < DLN2_MAX_URBS; i++) {
 		dln2->rx_buf[i] = kmalloc(rx_max_size, GFP_KERNEL);
@@ -620,8 +625,19 @@ static int dln2_setup_rx_urbs(struct dln2_dev *dln2,
 		usb_fill_bulk_urb(dln2->rx_urb[i], dln2->usb_dev,
 				  usb_rcvbulkpipe(dln2->usb_dev, dln2->ep_in),
 				  dln2->rx_buf[i], rx_max_size, dln2_rx, dln2);
+	}
 
-		ret = usb_submit_urb(dln2->rx_urb[i], GFP_KERNEL);
+	return 0;
+}
+
+static int dln2_start_rx_urbs(struct dln2_dev *dln2, gfp_t gfp)
+{
+	struct device *dev = &dln2->interface->dev;
+	int ret;
+	int i;
+
+	for (i = 0; i < DLN2_MAX_URBS; i++) {
+		ret = usb_submit_urb(dln2->rx_urb[i], gfp);
 		if (ret < 0) {
 			dev_err(dev, "failed to submit RX URB: %d\n", ret);
 			return ret;
@@ -665,9 +681,8 @@ static const struct mfd_cell dln2_devs[] = {
 	},
 };
 
-static void dln2_disconnect(struct usb_interface *interface)
+static void dln2_stop(struct dln2_dev *dln2)
 {
-	struct dln2_dev *dln2 = usb_get_intfdata(interface);
 	int i, j;
 
 	/* don't allow starting new transfers */
@@ -696,6 +711,15 @@ static void dln2_disconnect(struct usb_interface *interface)
 	/* wait for transfers to end */
 	wait_event(dln2->disconnect_wq, !dln2->active_transfers);
 
+	dln2_stop_rx_urbs(dln2);
+}
+
+static void dln2_disconnect(struct usb_interface *interface)
+{
+	struct dln2_dev *dln2 = usb_get_intfdata(interface);
+
+	dln2_stop(dln2);
+
 	mfd_remove_devices(&interface->dev);
 
 	dln2_free(dln2);
@@ -738,28 +762,53 @@ static int dln2_probe(struct usb_interface *interface,
 
 	ret = dln2_setup_rx_urbs(dln2, hostif);
 	if (ret)
-		goto out_cleanup;
+		goto out_free;
+
+	ret = dln2_start_rx_urbs(dln2, GFP_KERNEL);
+	if (ret)
+		goto out_stop_rx;
 
 	ret = dln2_hw_init(dln2);
 	if (ret < 0) {
 		dev_err(dev, "failed to initialize hardware\n");
-		goto out_cleanup;
+		goto out_stop_rx;
 	}
 
 	ret = mfd_add_hotplug_devices(dev, dln2_devs, ARRAY_SIZE(dln2_devs));
 	if (ret != 0) {
 		dev_err(dev, "failed to add mfd devices to core\n");
-		goto out_cleanup;
+		goto out_stop_rx;
 	}
 
 	return 0;
 
-out_cleanup:
+out_stop_rx:
+	dln2_stop_rx_urbs(dln2);
+
+out_free:
 	dln2_free(dln2);
 
 	return ret;
 }
 
+static int dln2_suspend(struct usb_interface *iface, pm_message_t message)
+{
+	struct dln2_dev *dln2 = usb_get_intfdata(iface);
+
+	dln2_stop(dln2);
+
+	return 0;
+}
+
+static int dln2_resume(struct usb_interface *iface)
+{
+	struct dln2_dev *dln2 = usb_get_intfdata(iface);
+
+	dln2->disconnect = false;
+
+	return dln2_start_rx_urbs(dln2, GFP_NOIO);
+}
+
 static const struct usb_device_id dln2_table[] = {
 	{ USB_DEVICE(0xa257, 0x2013) },
 	{ }
@@ -772,6 +821,8 @@ static struct usb_driver dln2_driver = {
 	.probe = dln2_probe,
 	.disconnect = dln2_disconnect,
 	.id_table = dln2_table,
+	.suspend = dln2_suspend,
+	.resume = dln2_resume,
 };
 
 module_usb_driver(dln2_driver);

drivers/mfd/hi6421-pmic-core.c

@@ -35,7 +35,7 @@ static const struct mfd_cell hi6421_devs[] = {
 	{ .name = "hi6421-regulator", },
 };
 
-static struct regmap_config hi6421_regmap_config = {
+static const struct regmap_config hi6421_regmap_config = {
 	.reg_bits = 32,
 	.reg_stride = 4,
 	.val_bits = 8,

drivers/mfd/intel_soc_pmic_core.c

@@ -64,6 +64,9 @@ static int intel_soc_pmic_i2c_probe(struct i2c_client *i2c,
 	config = (struct intel_soc_pmic_config *)id->driver_data;
 
 	pmic = devm_kzalloc(dev, sizeof(*pmic), GFP_KERNEL);
+	if (!pmic)
+		return -ENOMEM;
+
 	dev_set_drvdata(dev, pmic);
 
 	pmic->regmap = devm_regmap_init_i2c(i2c, config->regmap_config);

drivers/mfd/intel_soc_pmic_core.h

@@ -23,7 +23,7 @@ struct intel_soc_pmic_config {
 	unsigned long irq_flags;
 	struct mfd_cell *cell_dev;
 	int n_cell_devs;
-	struct regmap_config *regmap_config;
+	const struct regmap_config *regmap_config;
 	struct regmap_irq_chip *irq_chip;
 };
 

drivers/mfd/intel_soc_pmic_crc.c

@@ -111,7 +111,7 @@ static struct mfd_cell crystal_cove_dev[] = {
 	},
 };
 
-static struct regmap_config crystal_cove_regmap_config = {
+static const struct regmap_config crystal_cove_regmap_config = {
 	.reg_bits = 8,
 	.val_bits = 8,
 

drivers/mfd/lm3533-core.c

@@ -583,7 +583,7 @@ static bool lm3533_precious_register(struct device *dev, unsigned int reg)
 	}
 }
 
-static struct regmap_config regmap_config = {
+static const struct regmap_config regmap_config = {
 	.reg_bits	= 8,
 	.val_bits	= 8,
 	.max_register	= LM3533_REG_MAX,

drivers/mfd/lpc_sch.c

@@ -75,6 +75,7 @@ static struct lpc_sch_info sch_chipset_info[] = {
 	[LPC_QUARK_X1000] = {
 		.io_size_gpio = GPIO_IO_SIZE,
 		.irq_gpio = GPIO_IRQ_QUARK_X1000,
+		.io_size_wdt = WDT_IO_SIZE,
 	},
 };
 

drivers/mfd/max77686.c

@@ -111,17 +111,17 @@ static bool max77802_is_volatile_reg(struct device *dev, unsigned int reg)
 		max77802_rtc_is_volatile_reg(dev, reg));
 }
 
-static struct regmap_config max77686_regmap_config = {
+static const struct regmap_config max77686_regmap_config = {
 	.reg_bits = 8,
 	.val_bits = 8,
 };
 
-static struct regmap_config max77686_rtc_regmap_config = {
+static const struct regmap_config max77686_rtc_regmap_config = {
 	.reg_bits = 8,
 	.val_bits = 8,
 };
 
-static struct regmap_config max77802_regmap_config = {
+static const struct regmap_config max77802_regmap_config = {
 	.reg_bits = 8,
 	.val_bits = 8,
 	.writeable_reg = max77802_is_accessible_reg,
@@ -205,24 +205,10 @@ static const struct of_device_id max77686_pmic_dt_match[] = {
 	{ },
 };
 
-static struct max77686_platform_data *max77686_i2c_parse_dt_pdata(struct device
-								  *dev)
-{
-	struct max77686_platform_data *pd;
-
-	pd = devm_kzalloc(dev, sizeof(*pd), GFP_KERNEL);
-	if (!pd)
-		return NULL;
-
-	dev->platform_data = pd;
-	return pd;
-}
-
 static int max77686_i2c_probe(struct i2c_client *i2c,
 			      const struct i2c_device_id *id)
 {
 	struct max77686_dev *max77686 = NULL;
-	struct max77686_platform_data *pdata = dev_get_platdata(&i2c->dev);
 	const struct of_device_id *match;
 	unsigned int data;
 	int ret = 0;
@@ -233,14 +219,6 @@ static int max77686_i2c_probe(struct i2c_client *i2c,
 	const struct mfd_cell *cells;
 	int n_devs;
 
-	if (IS_ENABLED(CONFIG_OF) && i2c->dev.of_node && !pdata)
-		pdata = max77686_i2c_parse_dt_pdata(&i2c->dev);
-
-	if (!pdata) {
-		dev_err(&i2c->dev, "No platform data found.\n");
-		return -EINVAL;
-	}
-
 	max77686 = devm_kzalloc(&i2c->dev,
 				sizeof(struct max77686_dev), GFP_KERNEL);
 	if (!max77686)
@@ -259,7 +237,6 @@ static int max77686_i2c_probe(struct i2c_client *i2c,
 	max77686->dev = &i2c->dev;
 	max77686->i2c = i2c;
 
-	max77686->wakeup = pdata->wakeup;
 	max77686->irq = i2c->irq;
 
 	if (max77686->type == TYPE_MAX77686) {

drivers/mfd/mc13xxx-i2c.c

@@ -46,7 +46,7 @@ static const struct of_device_id mc13xxx_dt_ids[] = {
 };
 MODULE_DEVICE_TABLE(of, mc13xxx_dt_ids);
 
-static struct regmap_config mc13xxx_regmap_i2c_config = {
+static const struct regmap_config mc13xxx_regmap_i2c_config = {
 	.reg_bits = 8,
 	.val_bits = 24,
 

drivers/mfd/mc13xxx-spi.c

@@ -48,7 +48,7 @@ static const struct of_device_id mc13xxx_dt_ids[] = {
 };
 MODULE_DEVICE_TABLE(of, mc13xxx_dt_ids);
 
-static struct regmap_config mc13xxx_regmap_spi_config = {
+static const struct regmap_config mc13xxx_regmap_spi_config = {
 	.reg_bits = 7,
 	.pad_bits = 1,
 	.val_bits = 24,

drivers/mfd/omap-usb-host.c

@@ -129,16 +129,6 @@ static inline u32 usbhs_read(void __iomem *base, u32 reg)
 	return readl_relaxed(base + reg);
 }
 
-static inline void usbhs_writeb(void __iomem *base, u8 reg, u8 val)
-{
-	writeb_relaxed(val, base + reg);
-}
-
-static inline u8 usbhs_readb(void __iomem *base, u8 reg)
-{
-	return readb_relaxed(base + reg);
-}
-
 /*-------------------------------------------------------------------------*/
 
 /**

drivers/mfd/pcf50633-core.c

@@ -183,7 +183,7 @@ static int pcf50633_resume(struct device *dev)
 
 static SIMPLE_DEV_PM_OPS(pcf50633_pm, pcf50633_suspend, pcf50633_resume);
 
-static struct regmap_config pcf50633_regmap_config = {
+static const struct regmap_config pcf50633_regmap_config = {
 	.reg_bits = 8,
 	.val_bits = 8,
 };

drivers/mfd/retu-mfd.c

@@ -222,7 +222,7 @@ static struct regmap_bus retu_bus = {
 	.val_format_endian_default = REGMAP_ENDIAN_NATIVE,
 };
 
-static struct regmap_config retu_config = {
+static const struct regmap_config retu_config = {
 	.reg_bits = 8,
 	.val_bits = 16,
 };

drivers/mfd/rt5033.c

+/*
+ * MFD core driver for the Richtek RT5033.
+ *
+ * RT5033 comprises multiple sub-devices switcing charger, fuel gauge,
+ * flash LED, current source, LDO and BUCK regulators.
+ *
+ * Copyright (C) 2014 Samsung Electronics, Co., Ltd.
+ * Author: Beomho Seo <beomho.seo@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published bythe Free Software Foundation.
+ */
+
+#include <linux/err.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/of_device.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/rt5033.h>
+#include <linux/mfd/rt5033-private.h>
+
+static const struct regmap_irq rt5033_irqs[] = {
+	{ .mask = RT5033_PMIC_IRQ_BUCKOCP, },
+	{ .mask = RT5033_PMIC_IRQ_BUCKLV, },
+	{ .mask = RT5033_PMIC_IRQ_SAFELDOLV, },
+	{ .mask = RT5033_PMIC_IRQ_LDOLV, },
+	{ .mask = RT5033_PMIC_IRQ_OT, },
+	{ .mask = RT5033_PMIC_IRQ_VDDA_UV, },
+};
+
+static const struct regmap_irq_chip rt5033_irq_chip = {
+	.name		= "rt5033",
+	.status_base	= RT5033_REG_PMIC_IRQ_STAT,
+	.mask_base	= RT5033_REG_PMIC_IRQ_CTRL,
+	.mask_invert	= true,
+	.num_regs	= 1,
+	.irqs		= rt5033_irqs,
+	.num_irqs	= ARRAY_SIZE(rt5033_irqs),
+};
+
+static const struct mfd_cell rt5033_devs[] = {
+	{ .name = "rt5033-regulator", },
+	{
+		.name = "rt5033-charger",
+		.of_compatible = "richtek,rt5033-charger",
+	}, {
+		.name = "rt5033-battery",
+		.of_compatible = "richtek,rt5033-battery",
+	},
+};
+
+static const struct regmap_config rt5033_regmap_config = {
+	.reg_bits	= 8,
+	.val_bits	= 8,
+	.max_register	= RT5033_REG_END,
+};
+
+static int rt5033_i2c_probe(struct i2c_client *i2c,
+				const struct i2c_device_id *id)
+{
+	struct rt5033_dev *rt5033;
+	unsigned int dev_id;
+	int ret;
+
+	rt5033 = devm_kzalloc(&i2c->dev, sizeof(*rt5033), GFP_KERNEL);
+	if (!rt5033)
+		return -ENOMEM;
+
+	i2c_set_clientdata(i2c, rt5033);
+	rt5033->dev = &i2c->dev;
+	rt5033->irq = i2c->irq;
+	rt5033->wakeup = true;
+
+	rt5033->regmap = devm_regmap_init_i2c(i2c, &rt5033_regmap_config);
+	if (IS_ERR(rt5033->regmap)) {
+		dev_err(&i2c->dev, "Failed to allocate register map.\n");
+		return PTR_ERR(rt5033->regmap);
+	}
+
+	ret = regmap_read(rt5033->regmap, RT5033_REG_DEVICE_ID, &dev_id);
+	if (ret) {
+		dev_err(&i2c->dev, "Device not found\n");
+		return -ENODEV;
+	}
+	dev_info(&i2c->dev, "Device found Device ID: %04x\n", dev_id);
+
+	ret = regmap_add_irq_chip(rt5033->regmap, rt5033->irq,
+			IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
+			0, &rt5033_irq_chip, &rt5033->irq_data);
+	if (ret) {
+		dev_err(&i2c->dev, "Failed to request IRQ %d: %d\n",
+							rt5033->irq, ret);
+		return ret;
+	}
+
+	ret = mfd_add_devices(rt5033->dev, -1, rt5033_devs,
+			ARRAY_SIZE(rt5033_devs), NULL, 0,
+			regmap_irq_get_domain(rt5033->irq_data));
+	if (ret < 0) {
+		dev_err(&i2c->dev, "Failed to add RT5033 child devices.\n");
+		return ret;
+	}
+
+	device_init_wakeup(rt5033->dev, rt5033->wakeup);
+
+	return 0;
+}
+
+static int rt5033_i2c_remove(struct i2c_client *i2c)
+{
+	mfd_remove_devices(&i2c->dev);
+
+	return 0;
+}
+
+static const struct i2c_device_id rt5033_i2c_id[] = {
+	{ "rt5033", },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, rt5033_i2c_id);
+
+static const struct of_device_id rt5033_dt_match[] = {
+	{ .compatible = "richtek,rt5033", },
+	{ }
+};
+
+static struct i2c_driver rt5033_driver = {
+	.driver = {
+		.name = "rt5033",
+		.of_match_table = of_match_ptr(rt5033_dt_match),
+	},
+	.probe = rt5033_i2c_probe,
+	.remove = rt5033_i2c_remove,
+	.id_table = rt5033_i2c_id,
+};
+module_i2c_driver(rt5033_driver);
+
+MODULE_ALIAS("i2c:rt5033");
+MODULE_DESCRIPTION("Richtek RT5033 multi-function core driver");
+MODULE_AUTHOR("Beomho Seo <beomho.seo@samsung.com>");
+MODULE_LICENSE("GPL");

drivers/mfd/rtsx_usb.c

@@ -681,9 +681,27 @@ static void rtsx_usb_disconnect(struct usb_interface *intf)
 #ifdef CONFIG_PM
 static int rtsx_usb_suspend(struct usb_interface *intf, pm_message_t message)
 {
+	struct rtsx_ucr *ucr =
+		(struct rtsx_ucr *)usb_get_intfdata(intf);
+	u16 val = 0;
+
 	dev_dbg(&intf->dev, "%s called with pm message 0x%04x\n",
 			__func__, message.event);
 
+	if (PMSG_IS_AUTO(message)) {
+		if (mutex_trylock(&ucr->dev_mutex)) {
+			rtsx_usb_get_card_status(ucr, &val);
+			mutex_unlock(&ucr->dev_mutex);
+
+			/* Defer the autosuspend if card exists */
+			if (val & (SD_CD | MS_CD))
+				return -EAGAIN;
+		} else {
+			/* There is an ongoing operation*/
+			return -EAGAIN;
+		}
+	}
+
 	return 0;
 }
 

drivers/mfd/smsc-ece1099.c

@@ -24,7 +24,7 @@
 #include <linux/mfd/smsc.h>
 #include <linux/of_platform.h>
 
-static struct regmap_config smsc_regmap_config = {
+static const struct regmap_config smsc_regmap_config = {
 		.reg_bits = 8,
 		.val_bits = 8,
 		.max_register = SMSC_VEN_ID_H,

drivers/mfd/sun6i-prcm.c

@@ -41,6 +41,14 @@ static const struct resource sun6i_a31_apb0_gates_clk_res[] = {
 	},
 };
 
+static const struct resource sun6i_a31_ir_clk_res[] = {
+	{
+		.start = 0x54,
+		.end = 0x57,
+		.flags = IORESOURCE_MEM,
+	},
+};
+
 static const struct resource sun6i_a31_apb0_rstc_res[] = {
 	{
 		.start = 0xb0,
@@ -68,6 +76,12 @@ static const struct mfd_cell sun6i_a31_prcm_subdevs[] = {
 		.num_resources = ARRAY_SIZE(sun6i_a31_apb0_gates_clk_res),
 		.resources = sun6i_a31_apb0_gates_clk_res,
 	},
+	{
+		.name = "sun6i-a31-ir-clk",
+		.of_compatible = "allwinner,sun4i-a10-mod0-clk",
+		.num_resources = ARRAY_SIZE(sun6i_a31_ir_clk_res),
+		.resources = sun6i_a31_ir_clk_res,
+	},
 	{
 		.name = "sun6i-a31-apb0-clock-reset",
 		.of_compatible = "allwinner,sun6i-a31-clock-reset",

drivers/mfd/tps65217.c

@@ -145,7 +145,7 @@ int tps65217_clear_bits(struct tps65217 *tps, unsigned int reg,
 }
 EXPORT_SYMBOL_GPL(tps65217_clear_bits);
 
-static struct regmap_config tps65217_regmap_config = {
+static const struct regmap_config tps65217_regmap_config = {
 	.reg_bits = 8,
 	.val_bits = 8,
 

drivers/mfd/tps65218.c

@@ -135,7 +135,7 @@ static const struct regmap_access_table tps65218_volatile_table = {
 	.n_yes_ranges = ARRAY_SIZE(tps65218_yes_ranges),
 };
 
-static struct regmap_config tps65218_regmap_config = {
+static const struct regmap_config tps65218_regmap_config = {
 	.reg_bits = 8,
 	.val_bits = 8,
 	.cache_type = REGCACHE_RBTREE,

drivers/mfd/twl-core.c

@@ -207,7 +207,7 @@ static struct twl_mapping twl4030_map[] = {
 	{ 2, TWL5031_BASEADD_INTERRUPTS },
 };
 
-static struct reg_default twl4030_49_defaults[] = {
+static const struct reg_default twl4030_49_defaults[] = {
 	/* Audio Registers */
 	{ 0x01, 0x00}, /* CODEC_MODE	*/
 	{ 0x02, 0x00}, /* OPTION	*/
@@ -306,7 +306,7 @@ static const struct regmap_access_table twl4030_49_volatile_table = {
 	.n_yes_ranges = ARRAY_SIZE(twl4030_49_volatile_ranges),
 };
 
-static struct regmap_config twl4030_regmap_config[4] = {
+static const struct regmap_config twl4030_regmap_config[4] = {
 	{
 		/* Address 0x48 */
 		.reg_bits = 8,
@@ -369,7 +369,7 @@ static struct twl_mapping twl6030_map[] = {
 	{ 1, TWL6030_BASEADD_GASGAUGE },
 };
 
-static struct regmap_config twl6030_regmap_config[3] = {
+static const struct regmap_config twl6030_regmap_config[3] = {
 	{
 		/* Address 0x48 */
 		.reg_bits = 8,
@@ -1087,7 +1087,7 @@ twl_probe(struct i2c_client *client, const struct i2c_device_id *id)
 	struct twl4030_platform_data	*pdata = dev_get_platdata(&client->dev);
 	struct device_node		*node = client->dev.of_node;
 	struct platform_device		*pdev;
-	struct regmap_config		*twl_regmap_config;
+	const struct regmap_config	*twl_regmap_config;
 	int				irq_base = 0;
 	int				status;
 	unsigned			i, num_slaves;

drivers/mfd/twl6040.c

@@ -44,7 +44,7 @@
 #define VIBRACTRL_MEMBER(reg) ((reg == TWL6040_REG_VIBCTLL) ? 0 : 1)
 #define TWL6040_NUM_SUPPLIES	(2)
 
-static struct reg_default twl6040_defaults[] = {
+static const struct reg_default twl6040_defaults[] = {
 	{ 0x01, 0x4B }, /* REG_ASICID	(ro) */
 	{ 0x02, 0x00 }, /* REG_ASICREV	(ro) */
 	{ 0x03, 0x00 }, /* REG_INTID	*/
@@ -580,7 +580,7 @@ static bool twl6040_writeable_reg(struct device *dev, unsigned int reg)
 	}
 }
 
-static struct regmap_config twl6040_regmap_config = {
+static const struct regmap_config twl6040_regmap_config = {
 	.reg_bits = 8,
 	.val_bits = 8,
 

drivers/mfd/wm8994-core.c

@@ -36,12 +36,12 @@
 static const struct mfd_cell wm8994_regulator_devs[] = {
 	{
 		.name = "wm8994-ldo",
-		.id = 1,
+		.id = 0,
 		.pm_runtime_no_callbacks = true,
 	},
 	{
 		.name = "wm8994-ldo",
-		.id = 2,
+		.id = 1,
 		.pm_runtime_no_callbacks = true,
 	},
 };
@@ -344,7 +344,7 @@ static int wm8994_device_init(struct wm8994 *wm8994, int irq)
 	dev_set_drvdata(wm8994->dev, wm8994);
 
 	/* Add the on-chip regulators first for bootstrapping */
-	ret = mfd_add_devices(wm8994->dev, -1,
+	ret = mfd_add_devices(wm8994->dev, 0,
 			      wm8994_regulator_devs,
 			      ARRAY_SIZE(wm8994_regulator_devs),
 			      NULL, 0, NULL);

drivers/regulator/qcom_rpm-regulator.c

@@ -205,6 +205,7 @@ static int rpm_reg_write(struct qcom_rpm_reg *vreg,
 	vreg->val[req->word] |= value << req->shift;
 
 	return qcom_rpm_write(vreg->rpm,
+			      QCOM_RPM_ACTIVE_STATE,
 			      vreg->resource,
 			      vreg->val,
 			      vreg->parts->request_len);

include/dt-bindings/mfd/qcom-rpm.h

+/*
+ * This header provides constants for the Qualcomm RPM bindings.
+ */
+
+#ifndef _DT_BINDINGS_MFD_QCOM_RPM_H
+#define _DT_BINDINGS_MFD_QCOM_RPM_H
+
+/*
+ * Constants use to identify individual resources in the RPM.
+ */
+#define QCOM_RPM_APPS_FABRIC_ARB		1
+#define QCOM_RPM_APPS_FABRIC_CLK		2
+#define QCOM_RPM_APPS_FABRIC_HALT		3
+#define QCOM_RPM_APPS_FABRIC_IOCTL		4
+#define QCOM_RPM_APPS_FABRIC_MODE		5
+#define QCOM_RPM_APPS_L2_CACHE_CTL		6
+#define QCOM_RPM_CFPB_CLK			7
+#define QCOM_RPM_CXO_BUFFERS			8
+#define QCOM_RPM_CXO_CLK			9
+#define QCOM_RPM_DAYTONA_FABRIC_CLK		10
+#define QCOM_RPM_DDR_DMM			11
+#define QCOM_RPM_EBI1_CLK			12
+#define QCOM_RPM_HDMI_SWITCH			13
+#define QCOM_RPM_MMFPB_CLK			14
+#define QCOM_RPM_MM_FABRIC_ARB			15
+#define QCOM_RPM_MM_FABRIC_CLK			16
+#define QCOM_RPM_MM_FABRIC_HALT			17
+#define QCOM_RPM_MM_FABRIC_IOCTL		18
+#define QCOM_RPM_MM_FABRIC_MODE			19
+#define QCOM_RPM_PLL_4				20
+#define QCOM_RPM_PM8058_LDO0			21
+#define QCOM_RPM_PM8058_LDO1			22
+#define QCOM_RPM_PM8058_LDO2			23
+#define QCOM_RPM_PM8058_LDO3			24
+#define QCOM_RPM_PM8058_LDO4			25
+#define QCOM_RPM_PM8058_LDO5			26
+#define QCOM_RPM_PM8058_LDO6			27
+#define QCOM_RPM_PM8058_LDO7			28
+#define QCOM_RPM_PM8058_LDO8			29
+#define QCOM_RPM_PM8058_LDO9			30
+#define QCOM_RPM_PM8058_LDO10			31
+#define QCOM_RPM_PM8058_LDO11			32
+#define QCOM_RPM_PM8058_LDO12			33
+#define QCOM_RPM_PM8058_LDO13			34
+#define QCOM_RPM_PM8058_LDO14			35
+#define QCOM_RPM_PM8058_LDO15			36
+#define QCOM_RPM_PM8058_LDO16			37
+#define QCOM_RPM_PM8058_LDO17			38
+#define QCOM_RPM_PM8058_LDO18			39
+#define QCOM_RPM_PM8058_LDO19			40
+#define QCOM_RPM_PM8058_LDO20			41
+#define QCOM_RPM_PM8058_LDO21			42
+#define QCOM_RPM_PM8058_LDO22			43
+#define QCOM_RPM_PM8058_LDO23			44
+#define QCOM_RPM_PM8058_LDO24			45
+#define QCOM_RPM_PM8058_LDO25			46
+#define QCOM_RPM_PM8058_LVS0			47
+#define QCOM_RPM_PM8058_LVS1			48
+#define QCOM_RPM_PM8058_NCP			49
+#define QCOM_RPM_PM8058_SMPS0			50
+#define QCOM_RPM_PM8058_SMPS1			51
+#define QCOM_RPM_PM8058_SMPS2			52
+#define QCOM_RPM_PM8058_SMPS3			53
+#define QCOM_RPM_PM8058_SMPS4			54
+#define QCOM_RPM_PM8821_LDO1			55
+#define QCOM_RPM_PM8821_SMPS1			56
+#define QCOM_RPM_PM8821_SMPS2			57
+#define QCOM_RPM_PM8901_LDO0			58
+#define QCOM_RPM_PM8901_LDO1			59
+#define QCOM_RPM_PM8901_LDO2			60
+#define QCOM_RPM_PM8901_LDO3			61
+#define QCOM_RPM_PM8901_LDO4			62
+#define QCOM_RPM_PM8901_LDO5			63
+#define QCOM_RPM_PM8901_LDO6			64
+#define QCOM_RPM_PM8901_LVS0			65
+#define QCOM_RPM_PM8901_LVS1			66
+#define QCOM_RPM_PM8901_LVS2			67
+#define QCOM_RPM_PM8901_LVS3			68
+#define QCOM_RPM_PM8901_MVS			69
+#define QCOM_RPM_PM8901_SMPS0			70
+#define QCOM_RPM_PM8901_SMPS1			71
+#define QCOM_RPM_PM8901_SMPS2			72
+#define QCOM_RPM_PM8901_SMPS3			73
+#define QCOM_RPM_PM8901_SMPS4			74
+#define QCOM_RPM_PM8921_CLK1			75
+#define QCOM_RPM_PM8921_CLK2			76
+#define QCOM_RPM_PM8921_LDO1			77
+#define QCOM_RPM_PM8921_LDO2			78
+#define QCOM_RPM_PM8921_LDO3			79
+#define QCOM_RPM_PM8921_LDO4			80
+#define QCOM_RPM_PM8921_LDO5			81
+#define QCOM_RPM_PM8921_LDO6			82
+#define QCOM_RPM_PM8921_LDO7			83
+#define QCOM_RPM_PM8921_LDO8			84
+#define QCOM_RPM_PM8921_LDO9			85
+#define QCOM_RPM_PM8921_LDO10			86
+#define QCOM_RPM_PM8921_LDO11			87
+#define QCOM_RPM_PM8921_LDO12			88
+#define QCOM_RPM_PM8921_LDO13			89
+#define QCOM_RPM_PM8921_LDO14			90
+#define QCOM_RPM_PM8921_LDO15			91
+#define QCOM_RPM_PM8921_LDO16			92
+#define QCOM_RPM_PM8921_LDO17			93
+#define QCOM_RPM_PM8921_LDO18			94
+#define QCOM_RPM_PM8921_LDO19			95
+#define QCOM_RPM_PM8921_LDO20			96
+#define QCOM_RPM_PM8921_LDO21			97
+#define QCOM_RPM_PM8921_LDO22			98
+#define QCOM_RPM_PM8921_LDO23			99
+#define QCOM_RPM_PM8921_LDO24			100
+#define QCOM_RPM_PM8921_LDO25			101
+#define QCOM_RPM_PM8921_LDO26			102
+#define QCOM_RPM_PM8921_LDO27			103
+#define QCOM_RPM_PM8921_LDO28			104
+#define QCOM_RPM_PM8921_LDO29			105
+#define QCOM_RPM_PM8921_LVS1			106
+#define QCOM_RPM_PM8921_LVS2			107
+#define QCOM_RPM_PM8921_LVS3			108
+#define QCOM_RPM_PM8921_LVS4			109
+#define QCOM_RPM_PM8921_LVS5			110
+#define QCOM_RPM_PM8921_LVS6			111
+#define QCOM_RPM_PM8921_LVS7			112
+#define QCOM_RPM_PM8921_MVS			113
+#define QCOM_RPM_PM8921_NCP			114
+#define QCOM_RPM_PM8921_SMPS1			115
+#define QCOM_RPM_PM8921_SMPS2			116
+#define QCOM_RPM_PM8921_SMPS3			117
+#define QCOM_RPM_PM8921_SMPS4			118
+#define QCOM_RPM_PM8921_SMPS5			119
+#define QCOM_RPM_PM8921_SMPS6			120
+#define QCOM_RPM_PM8921_SMPS7			121
+#define QCOM_RPM_PM8921_SMPS8			122
+#define QCOM_RPM_PXO_CLK			123
+#define QCOM_RPM_QDSS_CLK			124
+#define QCOM_RPM_SFPB_CLK			125
+#define QCOM_RPM_SMI_CLK			126
+#define QCOM_RPM_SYS_FABRIC_ARB			127
+#define QCOM_RPM_SYS_FABRIC_CLK			128
+#define QCOM_RPM_SYS_FABRIC_HALT		129
+#define QCOM_RPM_SYS_FABRIC_IOCTL		130
+#define QCOM_RPM_SYS_FABRIC_MODE		131
+#define QCOM_RPM_USB_OTG_SWITCH			132
+#define QCOM_RPM_VDDMIN_GPIO			133
+
+/*
+ * Constants used to select force mode for regulators.
+ */
+#define QCOM_RPM_FORCE_MODE_NONE		0
+#define QCOM_RPM_FORCE_MODE_LPM			1
+#define QCOM_RPM_FORCE_MODE_HPM			2
+#define QCOM_RPM_FORCE_MODE_AUTO		3
+#define QCOM_RPM_FORCE_MODE_BYPASS		4
+
+#endif

include/linux/mfd/axp20x.h

@@ -124,10 +124,27 @@ enum {
 #define AXP288_PMIC_ADC_H               0x56
 #define AXP288_PMIC_ADC_L               0x57
 #define AXP288_ADC_TS_PIN_CTRL          0x84
-
 #define AXP288_PMIC_ADC_EN              0x84
-#define AXP288_FG_TUNE5			0xed
 
+/* Fuel Gauge */
+#define AXP288_FG_RDC1_REG          0xba
+#define AXP288_FG_RDC0_REG          0xbb
+#define AXP288_FG_OCVH_REG          0xbc
+#define AXP288_FG_OCVL_REG          0xbd
+#define AXP288_FG_OCV_CURVE_REG     0xc0
+#define AXP288_FG_DES_CAP1_REG      0xe0
+#define AXP288_FG_DES_CAP0_REG      0xe1
+#define AXP288_FG_CC_MTR1_REG       0xe2
+#define AXP288_FG_CC_MTR0_REG       0xe3
+#define AXP288_FG_OCV_CAP_REG       0xe4
+#define AXP288_FG_CC_CAP_REG        0xe5
+#define AXP288_FG_LOW_CAP_REG       0xe6
+#define AXP288_FG_TUNE0             0xe8
+#define AXP288_FG_TUNE1             0xe9
+#define AXP288_FG_TUNE2             0xea
+#define AXP288_FG_TUNE3             0xeb
+#define AXP288_FG_TUNE4             0xec
+#define AXP288_FG_TUNE5             0xed
 
 /* Regulators IDs */
 enum {
@@ -236,4 +253,26 @@ struct axp20x_dev {
 	const struct regmap_irq_chip	*regmap_irq_chip;
 };
 
+#define BATTID_LEN				64
+#define OCV_CURVE_SIZE			32
+#define MAX_THERM_CURVE_SIZE	25
+#define PD_DEF_MIN_TEMP			0
+#define PD_DEF_MAX_TEMP			55
+
+struct axp20x_fg_pdata {
+	char battid[BATTID_LEN + 1];
+	int design_cap;
+	int min_volt;
+	int max_volt;
+	int max_temp;
+	int min_temp;
+	int cap1;
+	int cap0;
+	int rdc1;
+	int rdc0;
+	int ocv_curve[OCV_CURVE_SIZE];
+	int tcsz;
+	int thermistor_curve[MAX_THERM_CURVE_SIZE][2];
+};
+
 #endif /* __LINUX_MFD_AXP20X_H */

include/linux/mfd/da9063/core.h

@@ -36,6 +36,7 @@ enum da9063_models {
 enum da9063_variant_codes {
 	PMIC_DA9063_AD = 0x3,
 	PMIC_DA9063_BB = 0x5,
+	PMIC_DA9063_CA = 0x6,
 };
 
 /* Interrupts */

include/linux/mfd/da9150/core.h

+/*
+ * DA9150 MFD Driver - Core Data
+ *
+ * Copyright (c) 2014 Dialog Semiconductor
+ *
+ * Author: Adam Thomson <Adam.Thomson.Opensource@diasemi.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __DA9150_CORE_H
+#define __DA9150_CORE_H
+
+#include <linux/device.h>
+#include <linux/interrupt.h>
+#include <linux/regmap.h>
+
+/* I2C address paging */
+#define DA9150_REG_PAGE_SHIFT	8
+#define DA9150_REG_PAGE_MASK	0xFF
+
+/* IRQs */
+#define DA9150_NUM_IRQ_REGS	4
+#define DA9150_IRQ_VBUS		0
+#define DA9150_IRQ_CHG		1
+#define DA9150_IRQ_TCLASS	2
+#define DA9150_IRQ_TJUNC	3
+#define DA9150_IRQ_VFAULT	4
+#define DA9150_IRQ_CONF		5
+#define DA9150_IRQ_DAT		6
+#define DA9150_IRQ_DTYPE	7
+#define DA9150_IRQ_ID		8
+#define DA9150_IRQ_ADP		9
+#define DA9150_IRQ_SESS_END	10
+#define DA9150_IRQ_SESS_VLD	11
+#define DA9150_IRQ_FG		12
+#define DA9150_IRQ_GP		13
+#define DA9150_IRQ_TBAT		14
+#define DA9150_IRQ_GPIOA	15
+#define DA9150_IRQ_GPIOB	16
+#define DA9150_IRQ_GPIOC	17
+#define DA9150_IRQ_GPIOD	18
+#define DA9150_IRQ_GPADC	19
+#define DA9150_IRQ_WKUP		20
+
+struct da9150_pdata {
+	int irq_base;
+};
+
+struct da9150 {
+	struct device *dev;
+	struct regmap *regmap;
+	struct regmap_irq_chip_data *regmap_irq_data;
+	int irq;
+	int irq_base;
+};
+
+/* Device I/O */
+u8 da9150_reg_read(struct da9150 *da9150, u16 reg);
+void da9150_reg_write(struct da9150 *da9150, u16 reg, u8 val);
+void da9150_set_bits(struct da9150 *da9150, u16 reg, u8 mask, u8 val);
+
+void da9150_bulk_read(struct da9150 *da9150, u16 reg, int count, u8 *buf);
+void da9150_bulk_write(struct da9150 *da9150, u16 reg, int count, const u8 *buf);
+#endif /* __DA9150_CORE_H */

include/linux/mfd/max77686-private.h

@@ -447,7 +447,6 @@ struct max77686_dev {
 	struct regmap_irq_chip_data *rtc_irq_data;
 
 	int irq;
-	bool wakeup;
 	struct mutex irqlock;
 	int irq_masks_cur[MAX77686_IRQ_GROUP_NR];
 	int irq_masks_cache[MAX77686_IRQ_GROUP_NR];

include/linux/mfd/max77686.h

@@ -119,12 +119,6 @@ enum max77802_regulators {
 	MAX77802_REG_MAX,
 };
 
-struct max77686_regulator_data {
-	int id;
-	struct regulator_init_data *initdata;
-	struct device_node *of_node;
-};
-
 enum max77686_opmode {
 	MAX77686_OPMODE_NORMAL,
 	MAX77686_OPMODE_LP,
@@ -136,26 +130,4 @@ struct max77686_opmode_data {
 	int mode;
 };
 
-struct max77686_platform_data {
-	int ono;
-	int wakeup;
-
-	/* ---- PMIC ---- */
-	struct max77686_regulator_data *regulators;
-	int num_regulators;
-
-	struct max77686_opmode_data *opmode_data;
-
-	/*
-	 * GPIO-DVS feature is not enabled with the current version of
-	 * MAX77686 driver. Buck2/3/4_voltages[0] is used as the default
-	 * voltage at probe. DVS/SELB gpios are set as OUTPUT-LOW.
-	 */
-	int buck234_gpio_dvs[3]; /* GPIO of [0]DVS1, [1]DVS2, [2]DVS3 */
-	int buck234_gpio_selb[3]; /* [0]SELB2, [1]SELB3, [2]SELB4 */
-	unsigned int buck2_voltage[8]; /* buckx_voltage in uV */
-	unsigned int buck3_voltage[8];
-	unsigned int buck4_voltage[8];
-};
-
 #endif /* __LINUX_MFD_MAX77686_H */

include/linux/mfd/qcom_rpm.h

+#ifndef __QCOM_RPM_H__
+#define __QCOM_RPM_H__
+
+#include <linux/types.h>
+
+struct qcom_rpm;
+
+#define QCOM_RPM_ACTIVE_STATE	0
+#define QCOM_RPM_SLEEP_STATE	1
+
+int qcom_rpm_write(struct qcom_rpm *rpm, int state, int resource, u32 *buf, size_t count);
+
+#endif

include/linux/mfd/rt5033-private.h

+/*
+ * MFD core driver for Richtek RT5033
+ *
+ * Copyright (C) 2014 Samsung Electronics, Co., Ltd.
+ * Author: Beomho Seo <beomho.seo@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published bythe Free Software Foundation.
+ */
+
+#ifndef __RT5033_PRIVATE_H__
+#define __RT5033_PRIVATE_H__
+
+enum rt5033_reg {
+	RT5033_REG_CHG_STAT		= 0x00,
+	RT5033_REG_CHG_CTRL1		= 0x01,
+	RT5033_REG_CHG_CTRL2		= 0x02,
+	RT5033_REG_DEVICE_ID		= 0x03,
+	RT5033_REG_CHG_CTRL3		= 0x04,
+	RT5033_REG_CHG_CTRL4		= 0x05,
+	RT5033_REG_CHG_CTRL5		= 0x06,
+	RT5033_REG_RT_CTRL0		= 0x07,
+	RT5033_REG_CHG_RESET		= 0x08,
+	/* Reserved 0x09~0x18 */
+	RT5033_REG_RT_CTRL1		= 0x19,
+	/* Reserved 0x1A~0x20 */
+	RT5033_REG_FLED_FUNCTION1	= 0x21,
+	RT5033_REG_FLED_FUNCTION2	= 0x22,
+	RT5033_REG_FLED_STROBE_CTRL1	= 0x23,
+	RT5033_REG_FLED_STROBE_CTRL2	= 0x24,
+	RT5033_REG_FLED_CTRL1		= 0x25,
+	RT5033_REG_FLED_CTRL2		= 0x26,
+	RT5033_REG_FLED_CTRL3		= 0x27,
+	RT5033_REG_FLED_CTRL4		= 0x28,
+	RT5033_REG_FLED_CTRL5		= 0x29,
+	/* Reserved 0x2A~0x40 */
+	RT5033_REG_CTRL			= 0x41,
+	RT5033_REG_BUCK_CTRL		= 0x42,
+	RT5033_REG_LDO_CTRL		= 0x43,
+	/* Reserved 0x44~0x46 */
+	RT5033_REG_MANUAL_RESET_CTRL	= 0x47,
+	/* Reserved 0x48~0x5F */
+	RT5033_REG_CHG_IRQ1		= 0x60,
+	RT5033_REG_CHG_IRQ2		= 0x61,
+	RT5033_REG_CHG_IRQ3		= 0x62,
+	RT5033_REG_CHG_IRQ1_CTRL	= 0x63,
+	RT5033_REG_CHG_IRQ2_CTRL	= 0x64,
+	RT5033_REG_CHG_IRQ3_CTRL	= 0x65,
+	RT5033_REG_LED_IRQ_STAT		= 0x66,
+	RT5033_REG_LED_IRQ_CTRL		= 0x67,
+	RT5033_REG_PMIC_IRQ_STAT	= 0x68,
+	RT5033_REG_PMIC_IRQ_CTRL	= 0x69,
+	RT5033_REG_SHDN_CTRL		= 0x6A,
+	RT5033_REG_OFF_EVENT		= 0x6B,
+
+	RT5033_REG_END,
+};
+
+/* RT5033 Charger state register */
+#define RT5033_CHG_STAT_MASK		0x20
+#define RT5033_CHG_STAT_DISCHARGING	0x00
+#define RT5033_CHG_STAT_FULL		0x10
+#define RT5033_CHG_STAT_CHARGING	0x20
+#define RT5033_CHG_STAT_NOT_CHARGING	0x30
+#define RT5033_CHG_STAT_TYPE_MASK	0x60
+#define RT5033_CHG_STAT_TYPE_PRE	0x20
+#define RT5033_CHG_STAT_TYPE_FAST	0x60
+
+/* RT5033 CHGCTRL1 register */
+#define RT5033_CHGCTRL1_IAICR_MASK	0xe0
+#define RT5033_CHGCTRL1_MODE_MASK	0x01
+
+/* RT5033 CHGCTRL2 register */
+#define RT5033_CHGCTRL2_CV_MASK		0xfc
+
+/* RT5033 CHGCTRL3 register */
+#define RT5033_CHGCTRL3_CFO_EN_MASK	0x40
+#define RT5033_CHGCTRL3_TIMER_MASK	0x38
+#define RT5033_CHGCTRL3_TIMER_EN_MASK	0x01
+
+/* RT5033 CHGCTRL4 register */
+#define RT5033_CHGCTRL4_EOC_MASK	0x07
+#define RT5033_CHGCTRL4_IPREC_MASK	0x18
+
+/* RT5033 CHGCTRL5 register */
+#define RT5033_CHGCTRL5_VPREC_MASK	0x0f
+#define RT5033_CHGCTRL5_ICHG_MASK	0xf0
+#define RT5033_CHGCTRL5_ICHG_SHIFT	0x04
+#define RT5033_CHG_MAX_CURRENT		0x0d
+
+/* RT5033 RT CTRL1 register */
+#define RT5033_RT_CTRL1_UUG_MASK	0x02
+#define RT5033_RT_HZ_MASK		0x01
+
+/* RT5033 control register */
+#define RT5033_CTRL_FCCM_BUCK_MASK		0x00
+#define RT5033_CTRL_BUCKOMS_MASK		0x01
+#define RT5033_CTRL_LDOOMS_MASK			0x02
+#define RT5033_CTRL_SLDOOMS_MASK		0x03
+#define RT5033_CTRL_EN_BUCK_MASK		0x04
+#define RT5033_CTRL_EN_LDO_MASK			0x05
+#define RT5033_CTRL_EN_SAFE_LDO_MASK		0x06
+#define RT5033_CTRL_LDO_SLEEP_MASK		0x07
+
+/* RT5033 BUCK control register */
+#define RT5033_BUCK_CTRL_MASK			0x1f
+
+/* RT5033 LDO control register */
+#define RT5033_LDO_CTRL_MASK			0x1f
+
+/* RT5033 charger property - model, manufacturer */
+
+#define RT5033_CHARGER_MODEL	"RT5033WSC Charger"
+#define RT5033_MANUFACTURER	"Richtek Technology Corporation"
+
+/*
+ * RT5033 charger fast-charge current lmits (as in CHGCTRL1 register),
+ * AICR mode limits the input current for example,
+ * the AIRC 100 mode limits the input current to 100 mA.
+ */
+#define RT5033_AICR_100_MODE			0x20
+#define RT5033_AICR_500_MODE			0x40
+#define RT5033_AICR_700_MODE			0x60
+#define RT5033_AICR_900_MODE			0x80
+#define RT5033_AICR_1500_MODE			0xc0
+#define RT5033_AICR_2000_MODE			0xe0
+#define RT5033_AICR_MODE_MASK			0xe0
+
+/* RT5033 use internal timer need to set time */
+#define RT5033_FAST_CHARGE_TIMER4		0x00
+#define RT5033_FAST_CHARGE_TIMER6		0x01
+#define RT5033_FAST_CHARGE_TIMER8		0x02
+#define RT5033_FAST_CHARGE_TIMER9		0x03
+#define RT5033_FAST_CHARGE_TIMER12		0x04
+#define RT5033_FAST_CHARGE_TIMER14		0x05
+#define RT5033_FAST_CHARGE_TIMER16		0x06
+
+#define RT5033_INT_TIMER_ENABLE			0x01
+
+/* RT5033 charger termination enable mask */
+#define RT5033_TE_ENABLE_MASK			0x08
+
+/*
+ * RT5033 charger opa mode. RT50300 have two opa mode charger mode
+ * and boost mode for OTG
+ */
+
+#define RT5033_CHARGER_MODE			0x00
+#define RT5033_BOOST_MODE			0x01
+
+/* RT5033 charger termination enable */
+#define RT5033_TE_ENABLE			0x08
+
+/* RT5033 charger CFO enable */
+#define RT5033_CFO_ENABLE			0x40
+
+/* RT5033 charger constant charge voltage (as in CHGCTRL2 register), uV */
+#define RT5033_CHARGER_CONST_VOLTAGE_LIMIT_MIN	3650000U
+#define RT5033_CHARGER_CONST_VOLTAGE_STEP_NUM   25000U
+#define RT5033_CHARGER_CONST_VOLTAGE_LIMIT_MAX	4400000U
+
+/* RT5033 charger pre-charge current limits (as in CHGCTRL4 register), uA */
+#define RT5033_CHARGER_PRE_CURRENT_LIMIT_MIN	350000U
+#define RT5033_CHARGER_PRE_CURRENT_STEP_NUM	100000U
+#define RT5033_CHARGER_PRE_CURRENT_LIMIT_MAX	650000U
+
+/* RT5033 charger fast-charge current (as in CHGCTRL5 register), uA */
+#define RT5033_CHARGER_FAST_CURRENT_MIN		700000U
+#define RT5033_CHARGER_FAST_CURRENT_STEP_NUM	100000U
+#define RT5033_CHARGER_FAST_CURRENT_MAX		2000000U
+
+/*
+ * RT5033 charger const-charge end of charger current (
+ * as in CHGCTRL4 register), uA
+ */
+#define RT5033_CHARGER_EOC_MIN			150000U
+#define RT5033_CHARGER_EOC_REF			300000U
+#define RT5033_CHARGER_EOC_STEP_NUM1		50000U
+#define RT5033_CHARGER_EOC_STEP_NUM2		100000U
+#define RT5033_CHARGER_EOC_MAX			600000U
+
+/*
+ * RT5033 charger pre-charge threshold volt limits
+ * (as in CHGCTRL5 register), uV
+ */
+
+#define RT5033_CHARGER_PRE_THRESHOLD_LIMIT_MIN	2300000U
+#define RT5033_CHARGER_PRE_THRESHOLD_STEP_NUM	100000U
+#define RT5033_CHARGER_PRE_THRESHOLD_LIMIT_MAX	3800000U
+
+/*
+ * RT5033 charger enable UUG, If UUG enable MOS auto control by H/W charger
+ * circuit.
+ */
+#define RT5033_CHARGER_UUG_ENABLE		0x02
+
+/* RT5033 charger High impedance mode */
+#define RT5033_CHARGER_HZ_DISABLE		0x00
+#define RT5033_CHARGER_HZ_ENABLE		0x01
+
+/* RT5033 regulator BUCK output voltage uV */
+#define RT5033_REGULATOR_BUCK_VOLTAGE_MIN		1000000U
+#define RT5033_REGULATOR_BUCK_VOLTAGE_MAX		3000000U
+#define RT5033_REGULATOR_BUCK_VOLTAGE_STEP		100000U
+#define RT5033_REGULATOR_BUCK_VOLTAGE_STEP_NUM		32
+
+/* RT5033 regulator LDO output voltage uV */
+#define RT5033_REGULATOR_LDO_VOLTAGE_MIN		1200000U
+#define RT5033_REGULATOR_LDO_VOLTAGE_MAX		3000000U
+#define RT5033_REGULATOR_LDO_VOLTAGE_STEP		100000U
+#define RT5033_REGULATOR_LDO_VOLTAGE_STEP_NUM		32
+
+/* RT5033 regulator SAFE LDO output voltage uV */
+#define RT5033_REGULATOR_SAFE_LDO_VOLTAGE		4900000U
+
+enum rt5033_fuel_reg {
+	RT5033_FUEL_REG_OCV_H		= 0x00,
+	RT5033_FUEL_REG_OCV_L		= 0x01,
+	RT5033_FUEL_REG_VBAT_H		= 0x02,
+	RT5033_FUEL_REG_VBAT_L		= 0x03,
+	RT5033_FUEL_REG_SOC_H		= 0x04,
+	RT5033_FUEL_REG_SOC_L		= 0x05,
+	RT5033_FUEL_REG_CTRL_H		= 0x06,
+	RT5033_FUEL_REG_CTRL_L		= 0x07,
+	RT5033_FUEL_REG_CRATE		= 0x08,
+	RT5033_FUEL_REG_DEVICE_ID	= 0x09,
+	RT5033_FUEL_REG_AVG_VOLT_H	= 0x0A,
+	RT5033_FUEL_REG_AVG_VOLT_L	= 0x0B,
+	RT5033_FUEL_REG_CONFIG_H	= 0x0C,
+	RT5033_FUEL_REG_CONFIG_L	= 0x0D,
+	/* Reserved 0x0E~0x0F */
+	RT5033_FUEL_REG_IRQ_CTRL	= 0x10,
+	RT5033_FUEL_REG_IRQ_FLAG	= 0x11,
+	RT5033_FUEL_VMIN		= 0x12,
+	RT5033_FUEL_SMIN		= 0x13,
+	/* Reserved 0x14~0x1F */
+	RT5033_FUEL_VGCOMP1		= 0x20,
+	RT5033_FUEL_VGCOMP2		= 0x21,
+	RT5033_FUEL_VGCOMP3		= 0x22,
+	RT5033_FUEL_VGCOMP4		= 0x23,
+	/* Reserved 0x24~0xFD */
+	RT5033_FUEL_MFA_H		= 0xFE,
+	RT5033_FUEL_MFA_L		= 0xFF,
+
+	RT5033_FUEL_REG_END,
+};
+
+/* RT5033 fuel gauge battery present property */
+#define RT5033_FUEL_BAT_PRESENT		0x02
+
+/* RT5033 PMIC interrupts */
+#define RT5033_PMIC_IRQ_BUCKOCP		2
+#define RT5033_PMIC_IRQ_BUCKLV		3
+#define RT5033_PMIC_IRQ_SAFELDOLV	4
+#define RT5033_PMIC_IRQ_LDOLV		5
+#define RT5033_PMIC_IRQ_OT		6
+#define RT5033_PMIC_IRQ_VDDA_UV		7
+
+#endif /* __RT5033_PRIVATE_H__ */

include/linux/mfd/rt5033.h

+/*
+ * MFD core driver for the RT5033
+ *
+ * Copyright (C) 2014 Samsung Electronics
+ * Author: Beomho Seo <beomho.seo@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published bythe Free Software Foundation.
+ */
+
+#ifndef __RT5033_H__
+#define __RT5033_H__
+
+#include <linux/regulator/consumer.h>
+#include <linux/i2c.h>
+#include <linux/regmap.h>
+#include <linux/power_supply.h>
+
+/* RT5033 regulator IDs */
+enum rt5033_regulators {
+	RT5033_BUCK = 0,
+	RT5033_LDO,
+	RT5033_SAFE_LDO,
+
+	RT5033_REGULATOR_NUM,
+};
+
+struct rt5033_dev {
+	struct device *dev;
+
+	struct regmap *regmap;
+	struct regmap_irq_chip_data *irq_data;
+	int irq;
+	bool wakeup;
+};
+
+struct rt5033_battery {
+	struct i2c_client	*client;
+	struct rt5033_dev	*rt5033;
+	struct regmap		*regmap;
+	struct power_supply	psy;
+};
+
+/* RT5033 charger platform data */
+struct rt5033_charger_data {
+	unsigned int pre_uamp;
+	unsigned int pre_uvolt;
+	unsigned int const_uvolt;
+	unsigned int eoc_uamp;
+	unsigned int fast_uamp;
+};
+
+struct rt5033_charger {
+	struct device		*dev;
+	struct rt5033_dev	*rt5033;
+	struct power_supply	psy;
+
+	struct rt5033_charger_data	*chg;
+};
+
+#endif /* __RT5033_H__ */