Commit 5cdfdd6d authored by Linus Torvalds's avatar Linus Torvalds

Merge tag 'tty-6.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

Pull tty/serial driver fixes from Greg KH:
 "Here are some small tty and serial driver fixes for 6.3-rc3 to resolve
  some reported issues.

  They include:

   - 8250 driver Kconfig issue pointed out by you that showed up in -rc1

   - qcom-geni serial driver fixes

   - various 8250 driver fixes for reported problems

   - fsl_lpuart driver fixes

   - serdev fix for regression in -rc1

   - vt.c bugfix

  All have been in linux-next for over a week with no reported problems"

* tag 'tty-6.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  tty: vt: protect KD_FONT_OP_GET_TALL from unbound access
  serial: qcom-geni: drop bogus uart_write_wakeup()
  serial: qcom-geni: fix mapping of empty DMA buffer
  serial: qcom-geni: fix DMA mapping leak on shutdown
  serial: qcom-geni: fix console shutdown hang
  serdev: Set fwnode for serdev devices
  tty: serial: fsl_lpuart: fix race on RX DMA shutdown
  serial: 8250_pci1xxxx: Disable SERIAL_8250_PCI1XXXX config by default
  serial: 8250_fsl: fix handle_irq locking
  serial: 8250_em: Fix UART port type
  serial: 8250: ASPEED_VUART: select REGMAP instead of depending on it
  tty: serial: fsl_lpuart: skip waiting for transmission complete when UARTCTRL_SBK is asserted
  Revert "tty: serial: fsl_lpuart: adjust SERIAL_FSL_LPUART_CONSOLE config dependency"
parents ce86beb4 18365ebf
......@@ -534,7 +534,7 @@ static int of_serdev_register_devices(struct serdev_controller *ctrl)
if (!serdev)
continue;
serdev->dev.of_node = node;
device_set_node(&serdev->dev, of_fwnode_handle(node));
err = serdev_device_add(serdev);
if (err) {
......
......@@ -106,8 +106,8 @@ static int serial8250_em_probe(struct platform_device *pdev)
memset(&up, 0, sizeof(up));
up.port.mapbase = regs->start;
up.port.irq = irq;
up.port.type = PORT_UNKNOWN;
up.port.flags = UPF_BOOT_AUTOCONF | UPF_FIXED_PORT | UPF_IOREMAP;
up.port.type = PORT_16750;
up.port.flags = UPF_FIXED_PORT | UPF_IOREMAP | UPF_FIXED_TYPE;
up.port.dev = &pdev->dev;
up.port.private_data = priv;
......
......@@ -34,7 +34,7 @@ int fsl8250_handle_irq(struct uart_port *port)
iir = port->serial_in(port, UART_IIR);
if (iir & UART_IIR_NO_INT) {
spin_unlock(&up->port.lock);
spin_unlock_irqrestore(&up->port.lock, flags);
return 0;
}
......@@ -42,7 +42,7 @@ int fsl8250_handle_irq(struct uart_port *port)
if (unlikely(up->lsr_saved_flags & UART_LSR_BI)) {
up->lsr_saved_flags &= ~UART_LSR_BI;
port->serial_in(port, UART_RX);
spin_unlock(&up->port.lock);
spin_unlock_irqrestore(&up->port.lock, flags);
return 1;
}
......
......@@ -257,8 +257,9 @@ config SERIAL_8250_ASPEED_VUART
tristate "Aspeed Virtual UART"
depends on SERIAL_8250
depends on OF
depends on REGMAP && MFD_SYSCON
depends on MFD_SYSCON
depends on ARCH_ASPEED || COMPILE_TEST
select REGMAP
help
If you want to use the virtual UART (VUART) device on Aspeed
BMC platforms, enable this option. This enables the 16550A-
......@@ -299,7 +300,6 @@ config SERIAL_8250_PCI1XXXX
tristate "Microchip 8250 based serial port"
depends on SERIAL_8250 && PCI
select SERIAL_8250_PCILIB
default SERIAL_8250
help
Select this option if you have a setup with Microchip PCIe
Switch with serial port enabled and wish to enable 8250
......
......@@ -1313,7 +1313,7 @@ config SERIAL_FSL_LPUART
config SERIAL_FSL_LPUART_CONSOLE
bool "Console on Freescale lpuart serial port"
depends on SERIAL_FSL_LPUART
depends on SERIAL_FSL_LPUART=y
select SERIAL_CORE_CONSOLE
select SERIAL_EARLYCON
help
......
......@@ -1354,6 +1354,7 @@ static void lpuart_dma_rx_free(struct uart_port *port)
struct dma_chan *chan = sport->dma_rx_chan;
dmaengine_terminate_sync(chan);
del_timer_sync(&sport->lpuart_timer);
dma_unmap_sg(chan->device->dev, &sport->rx_sgl, 1, DMA_FROM_DEVICE);
kfree(sport->rx_ring.buf);
sport->rx_ring.tail = 0;
......@@ -1813,7 +1814,6 @@ static int lpuart32_startup(struct uart_port *port)
static void lpuart_dma_shutdown(struct lpuart_port *sport)
{
if (sport->lpuart_dma_rx_use) {
del_timer_sync(&sport->lpuart_timer);
lpuart_dma_rx_free(&sport->port);
sport->lpuart_dma_rx_use = false;
}
......@@ -1973,10 +1973,8 @@ lpuart_set_termios(struct uart_port *port, struct ktermios *termios,
* Since timer function acqures sport->port.lock, need to stop before
* acquring same lock because otherwise del_timer_sync() can deadlock.
*/
if (old && sport->lpuart_dma_rx_use) {
del_timer_sync(&sport->lpuart_timer);
if (old && sport->lpuart_dma_rx_use)
lpuart_dma_rx_free(&sport->port);
}
spin_lock_irqsave(&sport->port.lock, flags);
......@@ -2210,10 +2208,8 @@ lpuart32_set_termios(struct uart_port *port, struct ktermios *termios,
* Since timer function acqures sport->port.lock, need to stop before
* acquring same lock because otherwise del_timer_sync() can deadlock.
*/
if (old && sport->lpuart_dma_rx_use) {
del_timer_sync(&sport->lpuart_timer);
if (old && sport->lpuart_dma_rx_use)
lpuart_dma_rx_free(&sport->port);
}
spin_lock_irqsave(&sport->port.lock, flags);
......@@ -2240,9 +2236,15 @@ lpuart32_set_termios(struct uart_port *port, struct ktermios *termios,
/* update the per-port timeout */
uart_update_timeout(port, termios->c_cflag, baud);
/* wait transmit engin complete */
/*
* LPUART Transmission Complete Flag may never be set while queuing a break
* character, so skip waiting for transmission complete when UARTCTRL_SBK is
* asserted.
*/
if (!(old_ctrl & UARTCTRL_SBK)) {
lpuart32_write(&sport->port, 0, UARTMODIR);
lpuart32_wait_bit_set(&sport->port, UARTSTAT, UARTSTAT_TC);
}
/* disable transmit and receive */
lpuart32_write(&sport->port, old_ctrl & ~(UARTCTRL_TE | UARTCTRL_RE),
......@@ -3014,7 +3016,6 @@ static int lpuart_suspend(struct device *dev)
* cannot resume as expected, hence gracefully release the
* Rx DMA path before suspend and start Rx DMA path on resume.
*/
del_timer_sync(&sport->lpuart_timer);
lpuart_dma_rx_free(&sport->port);
/* Disable Rx DMA to use UART port as wakeup source */
......
......@@ -596,7 +596,7 @@ static void qcom_geni_serial_stop_tx_dma(struct uart_port *uport)
if (!qcom_geni_serial_main_active(uport))
return;
if (port->rx_dma_addr) {
if (port->tx_dma_addr) {
geni_se_tx_dma_unprep(&port->se, port->tx_dma_addr,
port->tx_remaining);
port->tx_dma_addr = 0;
......@@ -631,9 +631,8 @@ static void qcom_geni_serial_start_tx_dma(struct uart_port *uport)
if (port->tx_dma_addr)
return;
xmit_size = uart_circ_chars_pending(xmit);
if (xmit_size < WAKEUP_CHARS)
uart_write_wakeup(uport);
if (uart_circ_empty(xmit))
return;
xmit_size = CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE);
......@@ -1070,6 +1069,10 @@ static int setup_fifos(struct qcom_geni_serial_port *port)
static void qcom_geni_serial_shutdown(struct uart_port *uport)
{
disable_irq(uport->irq);
if (uart_console(uport))
return;
qcom_geni_serial_stop_tx(uport);
qcom_geni_serial_stop_rx(uport);
}
......
......@@ -4545,6 +4545,9 @@ static int con_font_get(struct vc_data *vc, struct console_font_op *op)
int c;
unsigned int vpitch = op->op == KD_FONT_OP_GET_TALL ? op->height : 32;
if (vpitch > max_font_height)
return -EINVAL;
if (op->data) {
font.data = kvmalloc(max_font_size, GFP_KERNEL);
if (!font.data)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment