drm/i915: Check VBT for eDP ports on VLV

VLV can have eDP on either port B or C, or even both. Based on the
VBT spec, intel_dpd_is_edp() should work on VLV too, assuming we
check the correct ports.

So instead of hardcoding port D, rename the function to
intel_dp_is_edp() and pass the port as a parameter, and use it
on VLV ports B and C.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=71051Tested-by: Robert Hooker <robert.hooker@canonical.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
[danvet: Wrestle the patch to apply and compile properly.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drivers/gpu/drm/i915/intel_ddi.c

@@ -173,7 +173,7 @@ static void intel_prepare_ddi_buffers(struct drm_device *dev, enum port port)
 		ddi_translations = ddi_translations_dp;
 		break;
 	case PORT_D:
-		if (intel_dpd_is_edp(dev))
+		if (intel_dp_is_edp(dev, PORT_D))
 			ddi_translations = ddi_translations_edp;
 		else
 			ddi_translations = ddi_translations_dp;

drivers/gpu/drm/i915/intel_display.c

@@ -10049,7 +10049,7 @@ static void intel_setup_outputs(struct drm_device *dev)
 			intel_ddi_init(dev, PORT_D);
 	} else if (HAS_PCH_SPLIT(dev)) {
 		int found;
-		dpd_is_edp = intel_dpd_is_edp(dev);
+		dpd_is_edp = intel_dp_is_edp(dev, PORT_D);
 
 		if (has_edp_a(dev))
 			intel_dp_init(dev, DP_A, PORT_A);
@@ -10086,8 +10086,7 @@ static void intel_setup_outputs(struct drm_device *dev)
 			intel_hdmi_init(dev, VLV_DISPLAY_BASE + GEN4_HDMIC,
 					PORT_C);
 			if (I915_READ(VLV_DISPLAY_BASE + DP_C) & DP_DETECTED)
-				intel_dp_init(dev, VLV_DISPLAY_BASE + DP_C,
-					      PORT_C);
+				intel_dp_init(dev, VLV_DISPLAY_BASE + DP_C, PORT_C);
 		}
 
 		intel_dsi_init(dev);

drivers/gpu/drm/i915/intel_dp.c

@@ -3326,11 +3326,16 @@ intel_trans_dp_port_sel(struct drm_crtc *crtc)
 }
 
 /* check the VBT to see whether the eDP is on DP-D port */
-bool intel_dpd_is_edp(struct drm_device *dev)
+bool intel_dp_is_edp(struct drm_device *dev, enum port port)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	union child_device_config *p_child;
 	int i;
+	static const short port_mapping[] = {
+		[PORT_B] = PORT_IDPB,
+		[PORT_C] = PORT_IDPC,
+		[PORT_D] = PORT_IDPD,
+	};
 
 	if (!dev_priv->vbt.child_dev_num)
 		return false;
@@ -3338,7 +3343,7 @@ bool intel_dpd_is_edp(struct drm_device *dev)
 	for (i = 0; i < dev_priv->vbt.child_dev_num; i++) {
 		p_child = dev_priv->vbt.child_dev + i;
 
-		if (p_child->common.dvo_port == PORT_IDPD &&
+		if (p_child->common.dvo_port == port_mapping[port] &&
 		    (p_child->common.device_type & DEVICE_TYPE_eDP_BITS) ==
 		    (DEVICE_TYPE_eDP & DEVICE_TYPE_eDP_BITS))
 			return true;
@@ -3625,12 +3630,13 @@ intel_dp_init_connector(struct intel_digital_port *intel_dig_port,
 	case PORT_A:
 		type = DRM_MODE_CONNECTOR_eDP;
 		break;
+	case PORT_B:
 	case PORT_C:
-		if (IS_VALLEYVIEW(dev))
+		if (IS_VALLEYVIEW(dev) && intel_dp_is_edp(dev, port))
 			type = DRM_MODE_CONNECTOR_eDP;
 		break;
 	case PORT_D:
-		if (HAS_PCH_SPLIT(dev) && intel_dpd_is_edp(dev))
+		if (HAS_PCH_SPLIT(dev) && intel_dp_is_edp(dev, port))
 			type = DRM_MODE_CONNECTOR_eDP;
 		break;
 	default:	/* silence GCC warning */

drivers/gpu/drm/i915/intel_drv.h

@@ -708,7 +708,7 @@ void intel_dp_encoder_destroy(struct drm_encoder *encoder);
 void intel_dp_check_link_status(struct intel_dp *intel_dp);
 bool intel_dp_compute_config(struct intel_encoder *encoder,
 			     struct intel_crtc_config *pipe_config);
-bool intel_dpd_is_edp(struct drm_device *dev);
+bool intel_dp_is_edp(struct drm_device *dev, enum port port);
 void ironlake_edp_backlight_on(struct intel_dp *intel_dp);
 void ironlake_edp_backlight_off(struct intel_dp *intel_dp);
 void ironlake_edp_panel_on(struct intel_dp *intel_dp);