Commit 5dc64225 authored by John Youn's avatar John Youn Committed by Felipe Balbi

usb: dwc2: Remove debug prints in params.c

Remove debugging prints to show params.
Signed-off-by: default avatarJohn Youn <johnyoun@synopsys.com>
Signed-off-by: default avatarFelipe Balbi <felipe.balbi@linux.intel.com>
parent 4bd1ac64
...@@ -513,8 +513,6 @@ static void dwc2_get_host_hwparams(struct dwc2_hsotg *hsotg) ...@@ -513,8 +513,6 @@ static void dwc2_get_host_hwparams(struct dwc2_hsotg *hsotg)
gnptxfsiz = dwc2_readl(hsotg->regs + GNPTXFSIZ); gnptxfsiz = dwc2_readl(hsotg->regs + GNPTXFSIZ);
hptxfsiz = dwc2_readl(hsotg->regs + HPTXFSIZ); hptxfsiz = dwc2_readl(hsotg->regs + HPTXFSIZ);
dev_dbg(hsotg->dev, "gnptxfsiz=%08x\n", gnptxfsiz);
dev_dbg(hsotg->dev, "hptxfsiz=%08x\n", hptxfsiz);
if (forced) if (forced)
dwc2_clear_force_mode(hsotg); dwc2_clear_force_mode(hsotg);
...@@ -542,7 +540,6 @@ static void dwc2_get_dev_hwparams(struct dwc2_hsotg *hsotg) ...@@ -542,7 +540,6 @@ static void dwc2_get_dev_hwparams(struct dwc2_hsotg *hsotg)
forced = dwc2_force_mode_if_needed(hsotg, false); forced = dwc2_force_mode_if_needed(hsotg, false);
gnptxfsiz = dwc2_readl(hsotg->regs + GNPTXFSIZ); gnptxfsiz = dwc2_readl(hsotg->regs + GNPTXFSIZ);
dev_dbg(hsotg->dev, "gnptxfsiz=%08x\n", gnptxfsiz);
if (forced) if (forced)
dwc2_clear_force_mode(hsotg); dwc2_clear_force_mode(hsotg);
...@@ -588,12 +585,6 @@ int dwc2_get_hwparams(struct dwc2_hsotg *hsotg) ...@@ -588,12 +585,6 @@ int dwc2_get_hwparams(struct dwc2_hsotg *hsotg)
hwcfg4 = dwc2_readl(hsotg->regs + GHWCFG4); hwcfg4 = dwc2_readl(hsotg->regs + GHWCFG4);
grxfsiz = dwc2_readl(hsotg->regs + GRXFSIZ); grxfsiz = dwc2_readl(hsotg->regs + GRXFSIZ);
dev_dbg(hsotg->dev, "hwcfg1=%08x\n", hwcfg1);
dev_dbg(hsotg->dev, "hwcfg2=%08x\n", hwcfg2);
dev_dbg(hsotg->dev, "hwcfg3=%08x\n", hwcfg3);
dev_dbg(hsotg->dev, "hwcfg4=%08x\n", hwcfg4);
dev_dbg(hsotg->dev, "grxfsiz=%08x\n", grxfsiz);
/* /*
* Host specific hardware parameters. Reading these parameters * Host specific hardware parameters. Reading these parameters
* requires the controller to be in host mode. The mode will * requires the controller to be in host mode. The mode will
...@@ -653,53 +644,6 @@ int dwc2_get_hwparams(struct dwc2_hsotg *hsotg) ...@@ -653,53 +644,6 @@ int dwc2_get_hwparams(struct dwc2_hsotg *hsotg)
hw->rx_fifo_size = (grxfsiz & GRXFSIZ_DEPTH_MASK) >> hw->rx_fifo_size = (grxfsiz & GRXFSIZ_DEPTH_MASK) >>
GRXFSIZ_DEPTH_SHIFT; GRXFSIZ_DEPTH_SHIFT;
dev_dbg(hsotg->dev, "Detected values from hardware:\n");
dev_dbg(hsotg->dev, " op_mode=%d\n",
hw->op_mode);
dev_dbg(hsotg->dev, " arch=%d\n",
hw->arch);
dev_dbg(hsotg->dev, " dma_desc_enable=%d\n",
hw->dma_desc_enable);
dev_dbg(hsotg->dev, " power_optimized=%d\n",
hw->power_optimized);
dev_dbg(hsotg->dev, " i2c_enable=%d\n",
hw->i2c_enable);
dev_dbg(hsotg->dev, " hs_phy_type=%d\n",
hw->hs_phy_type);
dev_dbg(hsotg->dev, " fs_phy_type=%d\n",
hw->fs_phy_type);
dev_dbg(hsotg->dev, " utmi_phy_data_width=%d\n",
hw->utmi_phy_data_width);
dev_dbg(hsotg->dev, " num_dev_ep=%d\n",
hw->num_dev_ep);
dev_dbg(hsotg->dev, " num_dev_perio_in_ep=%d\n",
hw->num_dev_perio_in_ep);
dev_dbg(hsotg->dev, " host_channels=%d\n",
hw->host_channels);
dev_dbg(hsotg->dev, " max_transfer_size=%d\n",
hw->max_transfer_size);
dev_dbg(hsotg->dev, " max_packet_count=%d\n",
hw->max_packet_count);
dev_dbg(hsotg->dev, " nperio_tx_q_depth=0x%0x\n",
hw->nperio_tx_q_depth);
dev_dbg(hsotg->dev, " host_perio_tx_q_depth=0x%0x\n",
hw->host_perio_tx_q_depth);
dev_dbg(hsotg->dev, " dev_token_q_depth=0x%0x\n",
hw->dev_token_q_depth);
dev_dbg(hsotg->dev, " enable_dynamic_fifo=%d\n",
hw->enable_dynamic_fifo);
dev_dbg(hsotg->dev, " en_multiple_tx_fifo=%d\n",
hw->en_multiple_tx_fifo);
dev_dbg(hsotg->dev, " total_fifo_size=%d\n",
hw->total_fifo_size);
dev_dbg(hsotg->dev, " rx_fifo_size=%d\n",
hw->rx_fifo_size);
dev_dbg(hsotg->dev, " host_nperio_tx_fifo_size=%d\n",
hw->host_nperio_tx_fifo_size);
dev_dbg(hsotg->dev, " host_perio_tx_fifo_size=%d\n",
hw->host_perio_tx_fifo_size);
dev_dbg(hsotg->dev, "\n");
return 0; return 0;
} }
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment