Commit 5e29500e authored by Marek Marczykowski-Górecki's avatar Marek Marczykowski-Górecki Committed by Juergen Gross

xen-pciback: Allow setting PCI_MSIX_FLAGS_MASKALL too

When Xen domain configures MSI-X, the usual approach is to enable MSI-X
together with masking all of them via the config space, then fill the
table and only then clear PCI_MSIX_FLAGS_MASKALL. Allow doing this via
QEMU running in a stub domain.

Previously, when changing PCI_MSIX_FLAGS_MASKALL was not allowed, the
whole write was aborted, preventing change to the PCI_MSIX_FLAGS_ENABLE
bit too.

Note the Xen hypervisor intercepts this write anyway, and may keep the
PCI_MSIX_FLAGS_MASKALL bit set if it wishes to. It will store the
guest-requested state and will apply it eventually.
Signed-off-by: default avatarMarek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: default avatarJan Beulich <jbeulich@suse.com>
Link: https://lore.kernel.org/r/20221114103110.1519413-1-marmarek@invisiblethingslab.comSigned-off-by: default avatarJuergen Gross <jgross@suse.com>
parent da36a2a7
......@@ -190,13 +190,16 @@ static const struct config_field caplist_pm[] = {
};
static struct msi_msix_field_config {
u16 enable_bit; /* bit for enabling MSI/MSI-X */
unsigned int int_type; /* interrupt type for exclusiveness check */
u16 enable_bit; /* bit for enabling MSI/MSI-X */
u16 allowed_bits; /* bits allowed to be changed */
unsigned int int_type; /* interrupt type for exclusiveness check */
} msi_field_config = {
.enable_bit = PCI_MSI_FLAGS_ENABLE,
.allowed_bits = PCI_MSI_FLAGS_ENABLE,
.int_type = INTERRUPT_TYPE_MSI,
}, msix_field_config = {
.enable_bit = PCI_MSIX_FLAGS_ENABLE,
.allowed_bits = PCI_MSIX_FLAGS_ENABLE | PCI_MSIX_FLAGS_MASKALL,
.int_type = INTERRUPT_TYPE_MSIX,
};
......@@ -229,7 +232,7 @@ static int msi_msix_flags_write(struct pci_dev *dev, int offset, u16 new_value,
return 0;
if (!dev_data->allow_interrupt_control ||
(new_value ^ old_value) & ~field_config->enable_bit)
(new_value ^ old_value) & ~field_config->allowed_bits)
return PCIBIOS_SET_FAILED;
if (new_value & field_config->enable_bit) {
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment