[NETFILTER]: Add H.323 conntrack/NAT helper

Signed-off-by: Jing Min Zhao <zhaojignmin@hotmail.com>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

include/linux/netfilter_ipv4/ip_conntrack.h

@@ -29,6 +29,7 @@ union ip_conntrack_expect_proto {
 };
 
 /* Add protocol helper include file here */
+#include <linux/netfilter_ipv4/ip_conntrack_h323.h>
 #include <linux/netfilter_ipv4/ip_conntrack_pptp.h>
 #include <linux/netfilter_ipv4/ip_conntrack_amanda.h>
 #include <linux/netfilter_ipv4/ip_conntrack_ftp.h>
@@ -37,6 +38,7 @@ union ip_conntrack_expect_proto {
 /* per conntrack: application helper private data */
 union ip_conntrack_help {
 	/* insert conntrack helper private data (master) here */
+	struct ip_ct_h323_master ct_h323_info;
 	struct ip_ct_pptp_master ct_pptp_info;
 	struct ip_ct_ftp_master ct_ftp_info;
 	struct ip_ct_irc_master ct_irc_info;

include/linux/netfilter_ipv4/ip_conntrack_h323.h

+#ifndef _IP_CONNTRACK_H323_H
+#define _IP_CONNTRACK_H323_H
+
+#ifdef __KERNEL__
+
+#define RAS_PORT 1719
+#define Q931_PORT 1720
+#define H323_RTP_CHANNEL_MAX 4	/* Audio, video, FAX and other */
+
+/* This structure exists only once per master */
+struct ip_ct_h323_master {
+
+	/* Original and NATed Q.931 or H.245 signal ports */
+	u_int16_t sig_port[IP_CT_DIR_MAX];
+
+	/* Original and NATed RTP ports */
+	u_int16_t rtp_port[H323_RTP_CHANNEL_MAX][IP_CT_DIR_MAX];
+
+	union {
+		/* RAS connection timeout */
+		u_int32_t timeout;
+
+		/* Next TPKT length (for separate TPKT header and data) */
+		u_int16_t tpkt_len[IP_CT_DIR_MAX];
+	};
+};
+
+#endif
+
+#endif

net/ipv4/netfilter/Kconfig

@@ -168,6 +168,26 @@ config IP_NF_PPTP
 	  If you want to compile it as a module, say M here and read
 	  Documentation/modules.txt.  If unsure, say `N'.
 
+config IP_NF_H323
+	tristate  'H.323 protocol support'
+	depends on IP_NF_CONNTRACK
+	help
+	  H.323 is a VoIP signalling protocol from ITU-T. As one of the most
+	  important VoIP protocols, it is widely used by voice hardware and
+	  software including voice gateways, IP phones, Netmeeting, OpenPhone,
+	  Gnomemeeting, etc.
+
+	  With this module you can support H.323 on a connection tracking/NAT
+	  firewall.
+
+	  This module supports RAS, Fast-start, H.245 tunnelling, RTP/RTCP
+	  and T.120 based data and applications including audio, video, FAX,
+	  chat, whiteboard, file transfer, etc. For more information, please
+	  see http://nath323.sourceforge.net/.
+
+	  If you want to compile it as a module, say 'M' here and read
+	  Documentation/modules.txt.  If unsure, say 'N'.
+
 config IP_NF_QUEUE
 	tristate "IP Userspace queueing via NETLINK (OBSOLETE)"
 	help
@@ -484,6 +504,12 @@ config IP_NF_NAT_PPTP
 	default IP_NF_NAT if IP_NF_PPTP=y
 	default m if IP_NF_PPTP=m
 
+config IP_NF_NAT_H323
+	tristate
+	depends on IP_NF_IPTABLES!=n && IP_NF_CONNTRACK!=n && IP_NF_NAT!=n
+	default IP_NF_NAT if IP_NF_H323=y
+	default m if IP_NF_H323=m
+
 # mangle + specific targets
 config IP_NF_MANGLE
 	tristate "Packet mangling"

net/ipv4/netfilter/Makefile

@@ -10,6 +10,9 @@ iptable_nat-objs	:= ip_nat_rule.o ip_nat_standalone.o
 ip_conntrack_pptp-objs	:= ip_conntrack_helper_pptp.o ip_conntrack_proto_gre.o
 ip_nat_pptp-objs	:= ip_nat_helper_pptp.o ip_nat_proto_gre.o
 
+ip_conntrack_h323-objs := ip_conntrack_helper_h323.o ip_conntrack_helper_h323_asn1.o
+ip_nat_h323-objs := ip_nat_helper_h323.o
+
 # connection tracking
 obj-$(CONFIG_IP_NF_CONNTRACK) += ip_conntrack.o
 obj-$(CONFIG_IP_NF_NAT) += ip_nat.o
@@ -22,6 +25,7 @@ obj-$(CONFIG_IP_NF_CONNTRACK_NETLINK) += ip_conntrack_netlink.o
 obj-$(CONFIG_IP_NF_CT_PROTO_SCTP) += ip_conntrack_proto_sctp.o
 
 # connection tracking helpers
+obj-$(CONFIG_IP_NF_H323) += ip_conntrack_h323.o
 obj-$(CONFIG_IP_NF_PPTP) += ip_conntrack_pptp.o
 obj-$(CONFIG_IP_NF_AMANDA) += ip_conntrack_amanda.o
 obj-$(CONFIG_IP_NF_TFTP) += ip_conntrack_tftp.o
@@ -30,6 +34,7 @@ obj-$(CONFIG_IP_NF_IRC) += ip_conntrack_irc.o
 obj-$(CONFIG_IP_NF_NETBIOS_NS) += ip_conntrack_netbios_ns.o
 
 # NAT helpers 
+obj-$(CONFIG_IP_NF_NAT_H323) += ip_nat_h323.o
 obj-$(CONFIG_IP_NF_NAT_PPTP) += ip_nat_pptp.o
 obj-$(CONFIG_IP_NF_NAT_AMANDA) += ip_nat_amanda.o
 obj-$(CONFIG_IP_NF_NAT_TFTP) += ip_nat_tftp.o

net/ipv4/netfilter/ip_conntrack_helper_h323_asn1.h

+/****************************************************************************
+ * ip_conntrack_helper_h323_asn1.h - BER and PER decoding library for H.323
+ * 			      	     conntrack/NAT module.
+ *
+ * Copyright (c) 2006 by Jing Min Zhao <zhaojingmin@hotmail.com>
+ *
+ * This source code is licensed under General Public License version 2.
+ *
+ *
+ * This library is based on H.225 version 4, H.235 version 2 and H.245
+ * version 7. It is extremely optimized to decode only the absolutely
+ * necessary objects in a signal for Linux kernel NAT module use, so don't
+ * expect it to be a full ASN.1 library.
+ *
+ * Features:
+ *
+ * 1. Small. The total size of code plus data is less than 20 KB (IA32).
+ * 2. Fast. Decoding Netmeeting's Setup signal 1 million times on a PIII 866
+ *    takes only 3.9 seconds.
+ * 3. No memory allocation. It uses a static object. No need to initialize or
+ *    cleanup.
+ * 4. Thread safe.
+ * 5. Support embedded architectures that has no misaligned memory access
+ *    support.
+ *
+ * Limitations:
+ *
+ * 1. At most 30 faststart entries. Actually this is limited by ethernet's MTU.
+ *    If a Setup signal contains more than 30 faststart, the packet size will
+ *    very likely exceed the MTU size, then the TPKT will be fragmented. I
+ *    don't know how to handle this in a Netfilter module. Anybody can help?
+ *    Although I think 30 is enough for most of the cases.
+ * 2. IPv4 addresses only.
+ *
+ ****************************************************************************/
+
+#ifndef _IP_CONNTRACK_HELPER_H323_ASN1_H_
+#define _IP_CONNTRACK_HELPER_H323_ASN1_H_
+
+/*****************************************************************************
+ * H.323 Types
+ ****************************************************************************/
+#include "ip_conntrack_helper_h323_types.h"
+
+typedef struct {
+	enum {
+		Q931_NationalEscape = 0x00,
+		Q931_Alerting = 0x01,
+		Q931_CallProceeding = 0x02,
+		Q931_Connect = 0x07,
+		Q931_ConnectAck = 0x0F,
+		Q931_Progress = 0x03,
+		Q931_Setup = 0x05,
+		Q931_SetupAck = 0x0D,
+		Q931_Resume = 0x26,
+		Q931_ResumeAck = 0x2E,
+		Q931_ResumeReject = 0x22,
+		Q931_Suspend = 0x25,
+		Q931_SuspendAck = 0x2D,
+		Q931_SuspendReject = 0x21,
+		Q931_UserInformation = 0x20,
+		Q931_Disconnect = 0x45,
+		Q931_Release = 0x4D,
+		Q931_ReleaseComplete = 0x5A,
+		Q931_Restart = 0x46,
+		Q931_RestartAck = 0x4E,
+		Q931_Segment = 0x60,
+		Q931_CongestionCtrl = 0x79,
+		Q931_Information = 0x7B,
+		Q931_Notify = 0x6E,
+		Q931_Status = 0x7D,
+		Q931_StatusEnquiry = 0x75,
+		Q931_Facility = 0x62
+	} MessageType;
+	H323_UserInformation UUIE;
+} Q931;
+
+/*****************************************************************************
+ * Decode Functions Return Codes
+ ****************************************************************************/
+
+#define H323_ERROR_NONE 0	/* Decoded successfully */
+#define H323_ERROR_STOP 1	/* Decoding stopped, not really an error */
+#define H323_ERROR_BOUND -1
+#define H323_ERROR_RANGE -2
+
+
+/*****************************************************************************
+ * Decode Functions
+ ****************************************************************************/
+
+int DecodeRasMessage(unsigned char *buf, size_t sz, RasMessage * ras);
+int DecodeQ931(unsigned char *buf, size_t sz, Q931 * q931);
+int DecodeMultimediaSystemControlMessage(unsigned char *buf, size_t sz,
+					 MultimediaSystemControlMessage *
+					 mscm);
+
+#endif