Merge branch 'for-linus' into next

Bring in changes to ads7846 to avoid mereg conflicts.

arch/arm/mach-omap2/common-board-devices.c

@@ -64,6 +64,13 @@ void __init omap_ads7846_init(int bus_num, int gpio_pendown, int gpio_debounce,
 	struct spi_board_info *spi_bi = &ads7846_spi_board_info;
 	int err;
 
+	/*
+	 * If a board defines get_pendown_state() function, request the pendown
+	 * GPIO and set the GPIO debounce time.
+	 * If a board does not define the get_pendown_state() function, then
+	 * the ads7846 driver will setup the pendown GPIO itself.
+	 */
+	if (board_pdata && board_pdata->get_pendown_state) {
 		err = gpio_request_one(gpio_pendown, GPIOF_IN, "TSPenDown");
 		if (err) {
 			pr_err("Couldn't obtain gpio for TSPenDown: %d\n", err);
@@ -73,21 +80,20 @@ void __init omap_ads7846_init(int bus_num, int gpio_pendown, int gpio_debounce,
 		if (gpio_debounce)
 			gpio_set_debounce(gpio_pendown, gpio_debounce);
 
+		gpio_export(gpio_pendown, 0);
+	}
+
 	spi_bi->bus_num	= bus_num;
 	spi_bi->irq	= gpio_to_irq(gpio_pendown);
 
+	ads7846_config.gpio_pendown = gpio_pendown;
+
 	if (board_pdata) {
 		board_pdata->gpio_pendown = gpio_pendown;
+		board_pdata->gpio_pendown_debounce = gpio_debounce;
 		spi_bi->platform_data = board_pdata;
-		if (board_pdata->get_pendown_state)
-			gpio_export(gpio_pendown, 0);
-	} else {
-		ads7846_config.gpio_pendown = gpio_pendown;
 	}
 
-	if (!board_pdata || (board_pdata && !board_pdata->get_pendown_state))
-		gpio_free(gpio_pendown);
-
 	spi_register_board_info(&ads7846_spi_board_info, 1);
 }
 #else

drivers/input/input-mt.c

@@ -26,10 +26,14 @@ static void copy_abs(struct input_dev *dev, unsigned int dst, unsigned int src)
  * input_mt_init_slots() - initialize MT input slots
  * @dev: input device supporting MT events and finger tracking
  * @num_slots: number of slots used by the device
+ * @flags: mt tasks to handle in core
  *
  * This function allocates all necessary memory for MT slot handling
  * in the input device, prepares the ABS_MT_SLOT and
  * ABS_MT_TRACKING_ID events for use and sets up appropriate buffers.
+ * Depending on the flags set, it also performs pointer emulation and
+ * frame synchronization.
+ *
  * May be called repeatedly. Returns -EINVAL if attempting to
  * reinitialize with a different number of slots.
  */

drivers/input/mousedev.c

@@ -12,8 +12,8 @@
 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
 
 #define MOUSEDEV_MINOR_BASE	32
-#define MOUSEDEV_MINORS		32
-#define MOUSEDEV_MIX		31
+#define MOUSEDEV_MINORS		31
+#define MOUSEDEV_MIX		63
 
 #include <linux/sched.h>
 #include <linux/slab.h>

drivers/input/touchscreen/ads7846.c

@@ -955,7 +955,8 @@ static int ads7846_resume(struct device *dev)
 
 static SIMPLE_DEV_PM_OPS(ads7846_pm, ads7846_suspend, ads7846_resume);
 
-static int __devinit ads7846_setup_pendown(struct spi_device *spi, struct ads7846 *ts)
+static int __devinit ads7846_setup_pendown(struct spi_device *spi,
+					   struct ads7846 *ts)
 {
 	struct ads7846_platform_data *pdata = spi->dev.platform_data;
 	int err;
@@ -981,6 +982,9 @@ static int __devinit ads7846_setup_pendown(struct spi_device *spi, struct ads784
 
 		ts->gpio_pendown = pdata->gpio_pendown;
 
+		if (pdata->gpio_pendown_debounce)
+			gpio_set_debounce(pdata->gpio_pendown,
+					  pdata->gpio_pendown_debounce);
 	} else {
 		dev_err(&spi->dev, "no get_pendown_state nor gpio_pendown?\n");
 		return -EINVAL;

include/linux/spi/ads7846.h

@@ -46,8 +46,9 @@ struct ads7846_platform_data {
 	u16	debounce_rep;		/* additional consecutive good readings
 					 * required after the first two */
 	int	gpio_pendown;		/* the GPIO used to decide the pendown
-					 * state if get_pendown_state == NULL
-					 */
+					 * state if get_pendown_state == NULL */
+	int	gpio_pendown_debounce;	/* platform specific debounce time for
+					 * the gpio_pendown */
 	int	(*get_pendown_state)(void);
 	int	(*filter_init)	(const struct ads7846_platform_data *pdata,
 				 void **filter_data);