clk: imx: clk-fracn-gppll: Return rate in rate table properly in ->recalc_rate()

The PLL parameters in rate table should be directly compared with
those read from PLL registers instead of the cooked ones.

Fixes: 1b26cb8a ("clk: imx: support fracn gppll")
Cc: Abel Vesa <abel.vesa@nxp.com>
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: NXP Linux Team <linux-imx@nxp.com>
Cc: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20220609132902.3504651-6-peng.fan@oss.nxp.comSigned-off-by: Abel Vesa <abel.vesa@linaro.org>

drivers/clk/imx/clk-fracn-gppll.c

@@ -131,18 +131,7 @@ static unsigned long clk_fracn_gppll_recalc_rate(struct clk_hw *hw, unsigned lon
 	mfi = FIELD_GET(PLL_MFI_MASK, pll_div);
 
 	rdiv = FIELD_GET(PLL_RDIV_MASK, pll_div);
-	rdiv = rdiv + 1;
 	odiv = FIELD_GET(PLL_ODIV_MASK, pll_div);
-	switch (odiv) {
-	case 0:
-		odiv = 2;
-		break;
-	case 1:
-		odiv = 3;
-		break;
-	default:
-		break;
-	}
 
 	/*
 	 * Sometimes, the recalculated rate has deviation due to
@@ -160,6 +149,19 @@ static unsigned long clk_fracn_gppll_recalc_rate(struct clk_hw *hw, unsigned lon
 	if (rate)
 		return (unsigned long)rate;
 
+	rdiv = rdiv + 1;
+
+	switch (odiv) {
+	case 0:
+		odiv = 2;
+		break;
+	case 1:
+		odiv = 3;
+		break;
+	default:
+		break;
+	}
+
 	/* Fvco = Fref * (MFI + MFN / MFD) */
 	fvco = fvco * mfi * mfd + fvco * mfn;
 	do_div(fvco, mfd * rdiv * odiv);