Commit 5f0e1cff authored by Manu Abraham's avatar Manu Abraham Committed by Mauro Carvalho Chehab

V4L/DVB: AZ6027: Fix checkpatch violations

Signed-off-by: default avatarManu Abraham <manu@linuxtv.org>
Signed-off-by: default avatarMauro Carvalho Chehab <mchehab@redhat.com>
parent 3c3233ec
......@@ -10,18 +10,17 @@
* see Documentation/dvb/README.dvb-usb for more information
*/
#include "az6027.h"
/* Demodulator */
#include "stb0899_drv.h"
#include "stb0899_reg.h"
#include "stb0899_cfg.h"
/* Tuner */
#include "stb6100.h"
#include "stb6100_cfg.h"
#include "dvb_ca_en50221.h"
/* debug */
int dvb_usb_az6027_debug;
module_param_named(debug,dvb_usb_az6027_debug, int, 0644);
module_param_named(debug, dvb_usb_az6027_debug, int, 0644);
MODULE_PARM_DESC(debug, "set debugging level (1=info,xfer=2,rc=4 (or-able))." DVB_USB_DEBUG_STATUS);
DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
......@@ -34,7 +33,7 @@ struct az6027_device_state {
static const struct stb0899_s1_reg az6027_stb0899_s1_init_1[] = {
// 0x0000000b , /* SYSREG */
/* 0x0000000b, SYSREG */
{ STB0899_DEV_ID , 0x30 },
{ STB0899_DISCNTRL1 , 0x32 },
{ STB0899_DISCNTRL2 , 0x80 },
......@@ -45,7 +44,7 @@ static const struct stb0899_s1_reg az6027_stb0899_s1_init_1[] = {
{ STB0899_DISSTATUS , 0x20 },
{ STB0899_DISF22 , 0x99 },
{ STB0899_DISF22RX , 0xa8 },
//SYSREG ?
/* SYSREG ? */
{ STB0899_ACRPRESC , 0x11 },
{ STB0899_ACRDIV1 , 0x0a },
{ STB0899_ACRDIV2 , 0x05 },
......@@ -263,7 +262,7 @@ struct stb0899_config az6027_stb0899_config = {
.init_s2_fec = stb0899_s2_init_4,
.init_tst = stb0899_s1_init_5,
.demod_address = 0xd0,//0x68, /* 0xd0 >> 1 */
.demod_address = 0xd0, /* 0x68, 0xd0 >> 1 */
.xtal_freq = 27000000,
.inversion = IQ_SWAP_ON, /* 1 */
......@@ -303,14 +302,17 @@ struct stb6100_config az6027_stb6100_config = {
int az6027_usb_in_op(struct dvb_usb_device *d, u8 req, u16 value, u16 index, u8 *b, int blen)
{
int ret = -1;
if(mutex_lock_interruptible(&d->usb_mutex)) {
if (mutex_lock_interruptible(&d->usb_mutex))
return -EAGAIN;
}
ret = usb_control_msg(d->udev,
usb_rcvctrlpipe(d->udev,0),
usb_rcvctrlpipe(d->udev, 0),
req,
USB_TYPE_VENDOR | USB_DIR_IN,
value,index,b,blen,
value,
index,
b,
blen,
2000);
if (ret < 0) {
......@@ -319,30 +321,40 @@ int az6027_usb_in_op(struct dvb_usb_device *d, u8 req, u16 value, u16 index, u8
} else
ret = 0;
deb_xfer("in: req. %02x, val: %04x, ind: %04x, buffer: ", req, value, index);
debug_dump(b, blen, deb_xfer);
deb_xfer("in: req. %02x, val: %04x, ind: %04x, buffer: ",req,value,index);
debug_dump(b,blen,deb_xfer);
mutex_unlock(&d->usb_mutex);
return ret;
}
static int az6027_usb_out_op(struct dvb_usb_device *d, u8 req, u16 value,
u16 index, u8 *b, int blen)
static int az6027_usb_out_op(struct dvb_usb_device *d,
u8 req,
u16 value,
u16 index,
u8 *b,
int blen)
{
int ret;
deb_xfer("out: req. %02x, val: %04x, ind: %04x, buffer: ",req,value,index);
debug_dump(b,blen,deb_xfer);
if(mutex_lock_interruptible(&d->usb_mutex)) {
deb_xfer("out: req. %02x, val: %04x, ind: %04x, buffer: ", req, value, index);
debug_dump(b, blen, deb_xfer);
if (mutex_lock_interruptible(&d->usb_mutex))
return -EAGAIN;
}
if ((ret = usb_control_msg(d->udev,
usb_sndctrlpipe(d->udev,0),
ret = usb_control_msg(d->udev,
usb_sndctrlpipe(d->udev, 0),
req,
USB_TYPE_VENDOR | USB_DIR_OUT,
value,index,b,blen,
2000)) != blen) {
warn("usb out operation failed. (%d)",ret);
value,
index,
b,
blen,
2000);
if (ret != blen) {
warn("usb out operation failed. (%d)", ret);
mutex_unlock(&d->usb_mutex);
return -EIO;
} else{
......@@ -358,16 +370,18 @@ static int az6027_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff)
u16 value;
u16 index;
int blen;
deb_info("%s %d",__func__,onoff);
deb_info("%s %d", __func__, onoff);
req = 0xBC;
value = onoff;
index = 0;
blen =0;
if((ret = az6027_usb_out_op(adap->dev,req,value,index,NULL,blen)) != 0) {
warn("usb out operation failed. (%d)",ret);
}
blen = 0;
ret = az6027_usb_out_op(adap->dev, req, value, index, NULL, blen);
if (ret != 0)
warn("usb out operation failed. (%d)", ret);
//info("write CA
return ret;
}
......@@ -405,25 +419,25 @@ static int az6027_ci_read_attribute_mem(struct dvb_ca_en50221 *ca,
int blen;
u8 b[12];
//info ("%s %d", __func__, slot);
if (0 != slot)
if (slot != 0)
return -EINVAL;
mutex_lock (&state->ca_mutex);
mutex_lock(&state->ca_mutex);
req = 0xC1;
value = address;
index = 0;
blen = 1;
ret = az6027_usb_in_op(d,req,value,index,b,blen);
ret = az6027_usb_in_op(d, req, value, index, b, blen);
if (ret < 0) {
warn("usb in operation failed. (%d)", ret);
ret = -EINVAL;
} else{
} else {
ret = b[0];
//info("CI MEM 0x%x = %x",address,b[0]);
}
//mdelay(10);
mutex_unlock (&state->ca_mutex);
mutex_unlock(&state->ca_mutex);
return ret;
}
......@@ -434,27 +448,28 @@ static int az6027_ci_write_attribute_mem(struct dvb_ca_en50221 *ca,
{
struct dvb_usb_device *d = (struct dvb_usb_device *)ca->data;
struct az6027_device_state *state = (struct az6027_device_state *)d->priv;
int ret;
u8 req;
u16 value1;
u16 index;
int blen;
deb_info ("%s %d", __func__, slot);
if (0 != slot)
deb_info("%s %d", __func__, slot);
if (slot != 0)
return -EINVAL;
mutex_lock (&state->ca_mutex);
mutex_lock(&state->ca_mutex);
req = 0xC2;
value1 = address;
index = value;
blen =0;
if((ret = az6027_usb_out_op(d,req,value1,index,NULL,blen)) != 0) {
warn("usb out operation failed. (%d)",ret);
}
//mdelay(10);
mutex_unlock (&state->ca_mutex);
blen = 0;
ret = az6027_usb_out_op(d, req, value1, index, NULL, blen);
if (ret != 0)
warn("usb out operation failed. (%d)", ret);
mutex_unlock(&state->ca_mutex);
return ret;
}
......@@ -472,27 +487,29 @@ static int az6027_ci_read_cam_control(struct dvb_ca_en50221 *ca,
int blen;
u8 b[12];
//info ("%s %d", __func__, slot);
if (0 != slot)
if (slot != 0)
return -EINVAL;
mutex_lock (&state->ca_mutex);
mutex_lock(&state->ca_mutex);
req = 0xC3;
value = address;
index = 0;
blen = 2;
ret = az6027_usb_in_op(d,req,value,index,b,blen);
ret = az6027_usb_in_op(d, req, value, index, b, blen);
if (ret < 0) {
warn("usb in operation failed. (%d)", ret);
ret = -EINVAL;
} else{
if(b[0] == 0)
} else {
if (b[0] == 0)
warn("Read CI IO error");
ret = b[1];
deb_info("read cam data = %x from 0x%x",b[1],value);
deb_info("read cam data = %x from 0x%x", b[1], value);
}
//udelay(350);
mutex_unlock (&state->ca_mutex);
mutex_unlock(&state->ca_mutex);
return ret;
}
......@@ -503,36 +520,37 @@ static int az6027_ci_write_cam_control(struct dvb_ca_en50221 *ca,
{
struct dvb_usb_device *d = (struct dvb_usb_device *)ca->data;
struct az6027_device_state *state = (struct az6027_device_state *)d->priv;
int ret;
u8 req;
u16 value1;
u16 index;
int blen;
//info ("%s %d", __func__, slot);
if (0 != slot)
if (slot != 0)
return -EINVAL;
mutex_lock (&state->ca_mutex);
mutex_lock(&state->ca_mutex);
req = 0xC4;
value1 = address;
index = value;
blen =0;
if((ret = az6027_usb_out_op(d,req,value1,index,NULL,blen)) != 0) {
warn("usb out operation failed. (%d)",ret);
blen = 0;
ret = az6027_usb_out_op(d, req, value1, index, NULL, blen);
if (ret != 0) {
warn("usb out operation failed. (%d)", ret);
goto failed;
}
//info("write CAM data(%x) to 0x%x ",index, value1);
//udelay(350);
failed:
mutex_unlock (&state->ca_mutex);
failed:
mutex_unlock(&state->ca_mutex);
return ret;
}
static int CI_CamReady(struct dvb_ca_en50221 *ca,
int slot)
static int CI_CamReady(struct dvb_ca_en50221 *ca, int slot)
{
struct dvb_usb_device *d = (struct dvb_usb_device *)ca->data;
int ret;
u8 req;
u16 value;
......@@ -544,7 +562,8 @@ static int CI_CamReady(struct dvb_ca_en50221 *ca,
value = 0;
index = 0;
blen = 1;
ret = az6027_usb_in_op(d,req,value,index,b,blen);
ret = az6027_usb_in_op(d, req, value, index, b, blen);
if (ret < 0) {
warn("usb in operation failed. (%d)", ret);
ret = -EIO;
......@@ -554,91 +573,92 @@ static int CI_CamReady(struct dvb_ca_en50221 *ca,
return ret;
}
static int az6027_ci_slot_reset(struct dvb_ca_en50221 *ca,
int slot)
static int az6027_ci_slot_reset(struct dvb_ca_en50221 *ca, int slot)
{
struct dvb_usb_device *d = (struct dvb_usb_device *)ca->data;
struct az6027_device_state *state = (struct az6027_device_state *)d->priv;
int ret,i;
int ret, i;
u8 req;
u16 value;
u16 index;
int blen;
mutex_lock (&state->ca_mutex);
mutex_lock(&state->ca_mutex);
req = 0xC6;
value = 1;
index = 0;
blen =0;
if((ret = az6027_usb_out_op(d,req,value,index,NULL,blen)) != 0) {
warn("usb out operation failed. (%d)",ret);
blen = 0;
ret = az6027_usb_out_op(d, req, value, index, NULL, blen);
if (ret != 0) {
warn("usb out operation failed. (%d)", ret);
goto failed;
}
msleep (500);
msleep(500);
req = 0xC6;
value = 0;
index = 0;
blen =0;
if((ret = az6027_usb_out_op(d,req,value,index,NULL,blen)) != 0) {
warn("usb out operation failed. (%d)",ret);
blen = 0;
ret = az6027_usb_out_op(d, req, value, index, NULL, blen);
if (ret != 0) {
warn("usb out operation failed. (%d)", ret);
goto failed;
}
for(i = 0;i < 15;i++)
{
for (i = 0; i < 15; i++) {
msleep(100);
if(CI_CamReady(ca,slot))
{
if (CI_CamReady(ca, slot)) {
deb_info("CAM Ready");
break;
}
}
msleep(5000);
failed:
mutex_unlock (&state->ca_mutex);
failed:
mutex_unlock(&state->ca_mutex);
return ret;
}
static int az6027_ci_slot_shutdown(struct dvb_ca_en50221 *ca,
int slot)
static int az6027_ci_slot_shutdown(struct dvb_ca_en50221 *ca, int slot)
{
// do nothing here.
return 0;
}
static int az6027_ci_slot_ts_enable(struct dvb_ca_en50221 *ca,
int slot)
static int az6027_ci_slot_ts_enable(struct dvb_ca_en50221 *ca, int slot)
{
struct dvb_usb_device *d = (struct dvb_usb_device *)ca->data;
struct az6027_device_state *state = (struct az6027_device_state *)d->priv;
int ret;
u8 req;
u16 value;
u16 index;
int blen;
deb_info("%s", __func__);
mutex_lock (&state->ca_mutex);
mutex_lock(&state->ca_mutex);
req = 0xC7;
value = 1;
index = 0;
blen =0;
if((ret = az6027_usb_out_op(d,req,value,index,NULL,blen)) != 0)
{
warn("usb out operation failed. (%d)",ret);
blen = 0;
ret = az6027_usb_out_op(d, req, value, index, NULL, blen);
if (ret != 0) {
warn("usb out operation failed. (%d)", ret);
goto failed;
}
failed:
mutex_unlock (&state->ca_mutex);
failed:
mutex_unlock(&state->ca_mutex);
return ret;
}
static int az6027_ci_poll_slot_status(struct dvb_ca_en50221 *ca,
int slot,
int open)
static int az6027_ci_poll_slot_status(struct dvb_ca_en50221 *ca, int slot, int open)
{
struct dvb_usb_device *d = (struct dvb_usb_device *)ca->data;
struct az6027_device_state *state = (struct az6027_device_state *)d->priv;
......@@ -649,27 +669,29 @@ static int az6027_ci_poll_slot_status(struct dvb_ca_en50221 *ca,
int blen;
u8 b[12];
mutex_lock (&state->ca_mutex);
mutex_lock(&state->ca_mutex);
req = 0xC5;
value = 0;
index = 0;
blen = 1;
ret = az6027_usb_in_op(d,req,value,index,b,blen);
ret = az6027_usb_in_op(d, req, value, index, b, blen);
if (ret < 0) {
warn("usb in operation failed. (%d)", ret);
ret = -EIO;
} else
ret = 0;
if(b[0] == 0)
if (b[0] == 0) {
ret = 0;
else if(b[0] == 1){
ret = (DVB_CA_EN50221_POLL_CAM_PRESENT |
DVB_CA_EN50221_POLL_CAM_READY);
//info("CAM IN slot = %d", slot);
} else if (b[0] == 1) {
ret = DVB_CA_EN50221_POLL_CAM_PRESENT |
DVB_CA_EN50221_POLL_CAM_READY;
}
mutex_unlock (&state->ca_mutex);
mutex_unlock(&state->ca_mutex);
return ret;
}
......@@ -702,7 +724,7 @@ static int az6027_ci_init(struct dvb_usb_adapter *a)
struct az6027_device_state *state = (struct az6027_device_state *)d->priv;
int ret;
deb_info ("%s", __func__);
deb_info("%s", __func__);
mutex_init(&state->ca_mutex);
......@@ -717,23 +739,23 @@ static int az6027_ci_init(struct dvb_usb_adapter *a)
state->ca.poll_slot_status = az6027_ci_poll_slot_status;
state->ca.data = d;
ret = dvb_ca_en50221_init (&a->dvb_adap,
ret = dvb_ca_en50221_init(&a->dvb_adap,
&state->ca,
/* flags */ 0,
/* n_slots */ 1);
if (0 != ret) {
err ("Cannot initialize CI: Error %d.", ret);
memset (&state->ca, 0, sizeof (state->ca));
0, /* flags */
1);/* n_slots */
if (ret != 0) {
err("Cannot initialize CI: Error %d.", ret);
memset(&state->ca, 0, sizeof(state->ca));
return ret;
}
deb_info ("CI initialized.");
deb_info("CI initialized.");
return 0;
}
static int az6027_read_mac_addr(struct dvb_usb_device *d,u8 mac[6])
static int az6027_read_mac_addr(struct dvb_usb_device *d, u8 mac[6])
{
az6027_usb_in_op(d, 0xb7, 6, 0, &mac[0], 6);
return 0;
......@@ -743,28 +765,38 @@ static int az6027_read_mac_addr(struct dvb_usb_device *d,u8 mac[6])
static int az6027_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage)
{
struct dvb_usb_adapter *adap = fe->dvb->priv;
u8 buf;
int ret;
struct dvb_usb_adapter *adap = fe->dvb->priv;
struct i2c_msg i2c_msg = {
.addr = 0x99,
.flags = 0,
.buf = &buf,
.len = 1
};
int ret;
/*
* 2 --18v
* 1 --13v
* 0 --off
*/
switch (voltage) {
case SEC_VOLTAGE_13:
buf = 1;// 2 --18v 1 --13v 0 --off
buf = 1;
ret = i2c_transfer(&adap->dev->i2c_adap, &i2c_msg, 1);
break;
case SEC_VOLTAGE_18:
buf = 2;// 2 --18v 1 --13v 0 --off
buf = 2;
ret = i2c_transfer(&adap->dev->i2c_adap, &i2c_msg, 1);
break;
case SEC_VOLTAGE_OFF:
buf = 0;// 2 --18v 1 --13v 0 --off
buf = 0;
ret = i2c_transfer(&adap->dev->i2c_adap, &i2c_msg, 1);
break;
default:
return -EINVAL;
}
......@@ -781,12 +813,14 @@ static int az6027_frontend_poweron(struct dvb_usb_adapter *adap)
int blen;
req = 0xBC;
value = 1;//power on
value = 1; /* power on */
index = 3;
blen =0;
blen = 0;
if((ret = az6027_usb_out_op(adap->dev,req,value,index,NULL,blen)) != 0)
ret = az6027_usb_out_op(adap->dev, req, value, index, NULL, blen);
if (ret != 0)
return -EIO;
return 0;
}
static int az6027_frontend_reset(struct dvb_usb_adapter *adap)
......@@ -797,49 +831,59 @@ static int az6027_frontend_reset(struct dvb_usb_adapter *adap)
u16 index;
int blen;
//reset demodulator
/* reset demodulator */
req = 0xC0;
value = 1;//high
value = 1; /* high */
index = 3;
blen =0;
blen = 0;
if((ret = az6027_usb_out_op(adap->dev,req,value,index,NULL,blen)) != 0)
ret = az6027_usb_out_op(adap->dev, req, value, index, NULL, blen);
if (ret != 0)
return -EIO;
req = 0xC0;
value = 0;//low
value = 0; /* low */
index = 3;
blen =0;
blen = 0;
msleep_interruptible(200);
if((ret = az6027_usb_out_op(adap->dev,req,value,index,NULL,blen)) != 0)
ret = az6027_usb_out_op(adap->dev, req, value, index, NULL, blen);
if (ret != 0)
return -EIO;
msleep_interruptible(200);
req = 0xC0;
value = 1;//high
value = 1; /*high */
index = 3;
blen =0;
blen = 0;
if((ret = az6027_usb_out_op(adap->dev,req,value,index,NULL,blen)) != 0)
ret = az6027_usb_out_op(adap->dev, req, value, index, NULL, blen);
if (ret != 0)
return -EIO;
msleep_interruptible(200);
return 0;
}
static int az6027_frontend_tsbypass(struct dvb_usb_adapter *adap,int onoff)
static int az6027_frontend_tsbypass(struct dvb_usb_adapter *adap, int onoff)
{
int ret;
u8 req;
u16 value;
u16 index;
int blen;
//TS through
/* TS passthrough */
req = 0xC7;
value = onoff;
index = 0;
blen =0;
blen = 0;
if((ret = az6027_usb_out_op(adap->dev,req,value,index,NULL,blen)) != 0)
ret = az6027_usb_out_op(adap->dev, req, value, index, NULL, blen);
if (ret != 0)
return -EIO;
return 0;
}
......@@ -848,50 +892,52 @@ static int az6027_frontend_attach(struct dvb_usb_adapter *adap)
az6027_frontend_poweron(adap);
az6027_frontend_reset(adap);
deb_info("adap = %p,dev = %p\n",adap, adap->dev);
deb_info("adap = %p, dev = %p\n", adap, adap->dev);
adap->fe = stb0899_attach(&az6027_stb0899_config, &adap->dev->i2c_adap);
if (adap->fe) {
deb_info("found STB0899 DVB-S/DVB-S2 frontend @0x%02x",az6027_stb0899_config.demod_address);
deb_info("found STB0899 DVB-S/DVB-S2 frontend @0x%02x", az6027_stb0899_config.demod_address);
if (stb6100_attach(adap->fe, &az6027_stb6100_config, &adap->dev->i2c_adap)) {
deb_info("found STB6100 DVB-S/DVB-S2 frontend @0x%02x",az6027_stb6100_config.tuner_address);
deb_info("found STB6100 DVB-S/DVB-S2 frontend @0x%02x", az6027_stb6100_config.tuner_address);
adap->fe->ops.set_voltage = az6027_set_voltage;
az6027_ci_init(adap);
} else {
adap->fe = NULL;
}
}
else
} else
warn("no front-end attached\n");
az6027_frontend_tsbypass(adap,0);
az6027_frontend_tsbypass(adap, 0);
return 0;
}
static struct dvb_usb_device_properties az6027_properties;
static void
az6027_usb_disconnect(struct usb_interface *intf)
static void az6027_usb_disconnect(struct usb_interface *intf)
{
struct dvb_usb_device *d = usb_get_intfdata (intf);
az6027_ci_uninit (d);
dvb_usb_device_exit (intf);
struct dvb_usb_device *d = usb_get_intfdata(intf);
az6027_ci_uninit(d);
dvb_usb_device_exit(intf);
}
static int az6027_usb_probe(struct usb_interface *intf,
const struct usb_device_id *id)
{
return dvb_usb_device_init(intf, &az6027_properties,
THIS_MODULE, NULL, adapter_nr);
return dvb_usb_device_init(intf,
&az6027_properties,
THIS_MODULE,
NULL,
adapter_nr);
}
/* I2C */
static int az6027_i2c_xfer(struct i2c_adapter *adap,struct i2c_msg msg[],int num)
static int az6027_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[], int num)
{
struct dvb_usb_device *d = i2c_get_adapdata(adap);
int i=0,j=0,len=0;
int i = 0, j = 0, len = 0;
int ret;
u16 index;
u16 value;
......@@ -901,106 +947,74 @@ static int az6027_i2c_xfer(struct i2c_adapter *adap,struct i2c_msg msg[],int num
if (mutex_lock_interruptible(&d->i2c_mutex) < 0)
return -EAGAIN;
//err("i2c func called\n");
if (num > 2)
warn("more than 2 i2c messages at a time is not handled yet. TODO.");
for (i = 0; i < num; i++) {
if(msg[i].addr == 0x99) {
if (msg[i].addr == 0x99) {
req = 0xBE;
index = 0;
value = msg[i].buf[0] & 0x00ff;
length = 1;
az6027_usb_out_op(d,req,value,index,data,length);
az6027_usb_out_op(d, req, value, index, data, length);
}
if(msg[i].addr == 0xd0){
/* write/read request */
if (i+1 < num && (msg[i+1].flags & I2C_M_RD)) {
/*
err("i2c read ");
err("addr0 = 0x%x",msg[i].addr);
err("buf0 = 0x%02x 0x%02x",msg[i].buf[0],msg[i].buf[1]);
err("len0 = %d",msg[i].len);
err("addr1 = 0x%x",msg[i+1].addr);
err("buf1 = 0x%02x 0x%02x",msg[i+1].buf[0], *msg[i+1].buf);
err("len1 = %d",msg[i+1].len);
*/
if (msg[i].addr == 0xd0) {
/* write/read request */
if (i + 1 < num && (msg[i + 1].flags & I2C_M_RD)) {
req = 0xB9;
index = (((msg[i].buf[0] << 8) & 0xff00) | (msg[i].buf[1] & 0x00ff));
value = msg[i].addr + (msg[i].len << 8);
length = msg[i+1].len + 6;
//err("in: req. %02x, val: %04x, ind: %04x\n",req,value,index);
ret = az6027_usb_in_op(d,req,value,index,data,length);
//err("ret = %d data = %02x %02x",ret,data[5],data[6]);
len = msg[i+1].len;
for (j=0; j<len; j++)
{
msg[i+1].buf[j] = data[j+5];
}
length = msg[i + 1].len + 6;
ret = az6027_usb_in_op(d, req, value, index, data, length);
len = msg[i + 1].len;
for (j = 0; j < len; j++)
msg[i + 1].buf[j] = data[j + 5];
i++;
//err("11111");
}
else
{
//err("i2c write ");
//err("addr = 0x%x\n",msg[i].addr);
//err("buf = 0x%02x 0x%02x\n",msg[i].buf[0],msg[i].buf[1]);
//err("len = %d",msg[i].len);
if(msg[i].addr == 0xd0)//demod 16bit addr
{
} else {
if (msg[i].addr == 0xd0) {
/* demod 16bit addr */
req = 0xBD;
index = (((msg[i].buf[0] << 8) & 0xff00) | (msg[i].buf[1] & 0x00ff));//(msg[i].buf[0]<< 8) + msg[i].buf[1];
index = (((msg[i].buf[0] << 8) & 0xff00) | (msg[i].buf[1] & 0x00ff));
value = msg[i].addr + (2 << 8);
length = msg[i].len - 2;
len = msg[i].len - 2;
for(j=0;j<len;j++)
{
data[j] = msg[i].buf[j+2];
}
for (j = 0; j < len; j++)
data[j] = msg[i].buf[j + 2];
}
//err("out: req. %02x, val: %04x, ind: %04x\n",req,value,index);
az6027_usb_out_op(d,req,value,index,data,length);
//err("22222");
az6027_usb_out_op(d, req, value, index, data, length);
}
}
if(msg[i].addr == 0xc0){
if (msg[i].flags & I2C_M_RD) {
//err("i2c read ");
//err("addr0 = 0x%x",msg[i].addr);
//err("len0 = %d",msg[i].len);
if (msg[i].addr == 0xc0) {
if (msg[i].flags & I2C_M_RD) {
req = 0xB9;
index = 0x0;
value = msg[i].addr ;//+ (1 << 8);
value = msg[i].addr;
length = msg[i].len + 6;
//err("in: req. %02x, val: %04x, ind: %04x\n",req,value,index);
ret = az6027_usb_in_op(d,req,value,index,data,length);
//err("ret = %d data = %02x %02x",ret,data[5],data[6]);
ret = az6027_usb_in_op(d, req, value, index, data, length);
len = msg[i].len;
for (j=0; j<len; j++)
{
msg[i].buf[j] = data[j+5];
}
}
else{
//err("i2c write ");
//err("addr0 = 0x%x",msg[i].addr);
//err("buf0 = 0x%x",msg[i].buf[0]);
//err("len0 = %d",msg[i].len);
for (j = 0; j < len; j++)
msg[i].buf[j] = data[j + 5];
} else {
req = 0xBD;
index = msg[i].buf[0] & 0x00FF;
value = msg[i].addr + (1 << 8);
length = msg[i].len - 1;
len = msg[i].len - 1;
for(j=0;j<len;j++)
{
data[j] = msg[i].buf[j+1];
}
//err("out: req. %02x, val: %04x, ind: %04x\n",req,value,index);
az6027_usb_out_op(d,req,value,index,data,length);
for (j = 0; j < len; j++)
data[j] = msg[i].buf[j + 1];
az6027_usb_out_op(d, req, value, index, data, length);
}
}
}
......@@ -1020,15 +1034,21 @@ static struct i2c_algorithm az6027_i2c_algo = {
.functionality = az6027_i2c_func,
};
int az6027_identify_state(struct usb_device *udev, struct dvb_usb_device_properties *props,
struct dvb_usb_device_description **desc, int *cold)
int az6027_identify_state(struct usb_device *udev,
struct dvb_usb_device_properties *props,
struct dvb_usb_device_description **desc,
int *cold)
{
u8 b[16];
s16 ret = usb_control_msg(udev, usb_rcvctrlpipe(udev,0),
0xb7, USB_TYPE_VENDOR | USB_DIR_IN, 6, 0, b, 6, USB_CTRL_GET_TIMEOUT);
//info("FW GET_VERSION length: %d\n",ret);
s16 ret = usb_control_msg(udev,
usb_rcvctrlpipe(udev, 0),
0xb7,
USB_TYPE_VENDOR | USB_DIR_IN,
6,
0,
b,
6,
USB_CTRL_GET_TIMEOUT);
*cold = ret <= 0;
......@@ -1037,7 +1057,7 @@ int az6027_identify_state(struct usb_device *udev, struct dvb_usb_device_propert
}
static struct usb_device_id az6027_usb_table [] = {
static struct usb_device_id az6027_usb_table[] = {
{ USB_DEVICE(USB_VID_AZUREWAVE, USB_PID_AZUREWAVE_AZ6027) },
{ USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_DVBS2CI) },
{ USB_DEVICE(USB_VID_TECHNISAT, USB_PID_TECHNISAT_USB2_HDCI) },
......@@ -1049,7 +1069,6 @@ MODULE_DEVICE_TABLE(usb, az6027_usb_table);
static struct dvb_usb_device_properties az6027_properties = {
.caps = DVB_USB_IS_AN_I2C_ADAPTER,
.usb_ctrl = CYPRESS_FX2,
//.download_firmware = az6027_download_firmware,
.firmware = "dvb-usb-az6027-03.fw",
.no_reconnect = 1,
......@@ -1058,8 +1077,6 @@ static struct dvb_usb_device_properties az6027_properties = {
.num_adapters = 1,
.adapter = {
{
//.caps = DVB_USB_ADAP_RECEIVES_204_BYTE_TS,
.streaming_ctrl = az6027_streaming_ctrl,
.frontend_attach = az6027_frontend_attach,
......@@ -1076,9 +1093,10 @@ static struct dvb_usb_device_properties az6027_properties = {
},
}
},
//.power_ctrl = az6027_power_ctrl,
//.read_mac_address = az6027_read_mac_addr,
/*
.power_ctrl = az6027_power_ctrl,
.read_mac_address = az6027_read_mac_addr,
*/
.rc_key_map = az6027_rc_keys,
.rc_key_map_size = ARRAY_SIZE(az6027_rc_keys),
.rc_interval = 400,
......@@ -1087,7 +1105,8 @@ static struct dvb_usb_device_properties az6027_properties = {
.num_device_descs = 1,
.devices = {
{ .name = "AZUREWAVE DVB-S/S2 USB2.0 (AZ6027)",
{
.name = "AZUREWAVE DVB-S/S2 USB2.0 (AZ6027)",
.cold_ids = { &az6027_usb_table[0], NULL },
.warm_ids = { NULL },
},
......@@ -1099,7 +1118,6 @@ static struct dvb_usb_device_properties az6027_properties = {
static struct usb_driver az6027_usb_driver = {
.name = "dvb_usb_az6027",
.probe = az6027_usb_probe,
//.disconnect = dvb_usb_device_exit,
.disconnect = az6027_usb_disconnect,
.id_table = az6027_usb_table,
};
......@@ -1108,8 +1126,10 @@ static struct usb_driver az6027_usb_driver = {
static int __init az6027_usb_module_init(void)
{
int result;
if ((result = usb_register(&az6027_usb_driver))) {
err("usb_register failed. (%d)",result);
result = usb_register(&az6027_usb_driver);
if (result) {
err("usb_register failed. (%d)", result);
return result;
}
......
......@@ -6,9 +6,9 @@
extern int dvb_usb_az6027_debug;
#define deb_info(args...) dprintk(dvb_usb_az6027_debug,0x01,args)
#define deb_xfer(args...) dprintk(dvb_usb_az6027_debug,0x02,args)
#define deb_rc(args...) dprintk(dvb_usb_az6027_debug,0x04,args)
#define deb_fe(args...) dprintk(dvb_usb_az6027_debug,0x08,args)
#define deb_info(args...) dprintk(dvb_usb_az6027_debug, 0x01, args)
#define deb_xfer(args...) dprintk(dvb_usb_az6027_debug, 0x02, args)
#define deb_rc(args...) dprintk(dvb_usb_az6027_debug, 0x04, args)
#define deb_fe(args...) dprintk(dvb_usb_az6027_debug, 0x08, args)
#endif
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment