Merge branch 'pktgen-new-parameters'

Tariq Toukan says:

====================
pktgen new parameters

This patchset adds two parameters to the pktgen scripts.
* The first patch adds a parameter to control the number of
  packets sent by every pktgen thread.
* The second patch adds a parameter to control the index of
  first thread, instead of always starting from cpu 0.

Series generated against net-next commit:
f7aec129 rxrpc: Cache the congestion window setting

Thanks,
Tariq.

V2:
* rebased to latest net-next.
* per Jesper's comments on Patch 2, fixed $F_THREAD description
  and $L_THREAD evaluation.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

samples/pktgen/README.rst

@@ -21,7 +21,9 @@ across the sample scripts.  Usage example is printed on errors::
   -d : ($DEST_IP)   destination IP
   -m : ($DST_MAC)   destination MAC-addr
   -t : ($THREADS)   threads to start
+  -f : ($F_THREAD)  index of first thread (zero indexed CPU number)
   -c : ($SKB_CLONE) SKB clones send before alloc new SKB
+  -n : ($COUNT)     num messages to send per thread, 0 means indefinitely
   -b : ($BURST)     HW level bursting of SKBs
   -v : ($VERBOSE)   verbose
   -x : ($DEBUG)     debug

samples/pktgen/parameters.sh

@@ -10,7 +10,9 @@ function usage() {
     echo "  -d : (\$DEST_IP)   destination IP"
     echo "  -m : (\$DST_MAC)   destination MAC-addr"
     echo "  -t : (\$THREADS)   threads to start"
+    echo "  -f : (\$F_THREAD)  index of first thread (zero indexed CPU number)"
     echo "  -c : (\$SKB_CLONE) SKB clones send before alloc new SKB"
+    echo "  -n : (\$COUNT)     num messages to send per thread, 0 means indefinitely"
     echo "  -b : (\$BURST)     HW level bursting of SKBs"
     echo "  -v : (\$VERBOSE)   verbose"
     echo "  -x : (\$DEBUG)     debug"
@@ -20,7 +22,7 @@ function usage() {
 
 ##  --- Parse command line arguments / parameters ---
 ## echo "Commandline options:"
-while getopts "s:i:d:m:t:c:b:vxh6" option; do
+while getopts "s:i:d:m:f:t:c:n:b:vxh6" option; do
     case $option in
         i) # interface
           export DEV=$OPTARG
@@ -38,16 +40,22 @@ while getopts "s:i:d:m:t:c:b:vxh6" option; do
           export DST_MAC=$OPTARG
 	  info "Destination MAC set to: DST_MAC=$DST_MAC"
           ;;
+        f)
+	  export F_THREAD=$OPTARG
+	  info "Index of first thread (zero indexed CPU number): $F_THREAD"
+          ;;
         t)
 	  export THREADS=$OPTARG
-          export CPU_THREADS=$OPTARG
-	  let "CPU_THREADS -= 1"
-	  info "Number of threads to start: $THREADS (0 to $CPU_THREADS)"
+	  info "Number of threads to start: $THREADS"
           ;;
         c)
 	  export CLONE_SKB=$OPTARG
 	  info "CLONE_SKB=$CLONE_SKB"
           ;;
+        n)
+	  export COUNT=$OPTARG
+	  info "COUNT=$COUNT"
+          ;;
         b)
 	  export BURST=$OPTARG
 	  info "SKB bursting: BURST=$BURST"
@@ -77,12 +85,17 @@ if [ -z "$PKT_SIZE" ]; then
     info "Default packet size set to: set to: $PKT_SIZE bytes"
 fi
 
+if [ -z "$F_THREAD" ]; then
+    # First thread (F_THREAD) reference the zero indexed CPU number
+    export F_THREAD=0
+fi
+
 if [ -z "$THREADS" ]; then
-    # Zero CPU threads means one thread, because CPU numbers are zero indexed
-    export CPU_THREADS=0
     export THREADS=1
 fi
 
+export L_THREAD=$(( THREADS + F_THREAD - 1 ))
+
 if [ -z "$DEV" ]; then
     usage
     err 2 "Please specify output device"

samples/pktgen/pktgen_bench_xmit_mode_netif_receive.sh

@@ -39,16 +39,16 @@ if [ -z "$DEST_IP" ]; then
 fi
 [ -z "$DST_MAC" ] && DST_MAC="90:e2:ba:ff:ff:ff"
 [ -z "$BURST" ] && BURST=1024
+[ -z "$COUNT" ] && COUNT="10000000" # Zero means indefinitely
 
 # Base Config
 DELAY="0"        # Zero means max speed
-COUNT="10000000" # Zero means indefinitely
 
 # General cleanup everything since last run
 pg_ctrl "reset"
 
 # Threads are specified with parameter -t value in $THREADS
-for ((thread = 0; thread < $THREADS; thread++)); do
+for ((thread = $F_THREAD; thread <= $L_THREAD; thread++)); do
     # The device name is extended with @name, using thread number to
     # make then unique, but any name will do.
     dev=${DEV}@${thread}
@@ -81,7 +81,7 @@ pg_ctrl "start"
 echo "Done" >&2
 
 # Print results
-for ((thread = 0; thread < $THREADS; thread++)); do
+for ((thread = $F_THREAD; thread <= $L_THREAD; thread++)); do
     dev=${DEV}@${thread}
     echo "Device: $dev"
     cat /proc/net/pktgen/$dev | grep -A2 "Result:"

samples/pktgen/pktgen_bench_xmit_mode_queue_xmit.sh

@@ -22,16 +22,16 @@ fi
 if [[ -n "$BURST" ]]; then
     err 1 "Bursting not supported for this mode"
 fi
+[ -z "$COUNT" ] && COUNT="10000000" # Zero means indefinitely
 
 # Base Config
 DELAY="0"        # Zero means max speed
-COUNT="10000000" # Zero means indefinitely
 
 # General cleanup everything since last run
 pg_ctrl "reset"
 
 # Threads are specified with parameter -t value in $THREADS
-for ((thread = 0; thread < $THREADS; thread++)); do
+for ((thread = $F_THREAD; thread <= $L_THREAD; thread++)); do
     # The device name is extended with @name, using thread number to
     # make then unique, but any name will do.
     dev=${DEV}@${thread}
@@ -61,7 +61,7 @@ pg_ctrl "start"
 echo "Done" >&2
 
 # Print results
-for ((thread = 0; thread < $THREADS; thread++)); do
+for ((thread = $F_THREAD; thread <= $L_THREAD; thread++)); do
     dev=${DEV}@${thread}
     echo "Device: $dev"
     cat /proc/net/pktgen/$dev | grep -A2 "Result:"

samples/pktgen/pktgen_sample01_simple.sh

@@ -20,10 +20,10 @@ fi
 [ -z "$CLONE_SKB" ] && CLONE_SKB="0"
 # Example enforce param "-m" for dst_mac
 [ -z "$DST_MAC" ] && usage && err 2 "Must specify -m dst_mac"
+[ -z "$COUNT" ]   && COUNT="100000" # Zero means indefinitely
 
 # Base Config
 DELAY="0"        # Zero means max speed
-COUNT="100000"   # Zero means indefinitely
 
 # Flow variation random source port between min and max
 UDP_MIN=9

samples/pktgen/pktgen_sample02_multiqueue.sh

@@ -13,9 +13,10 @@ root_check_run_with_sudo "$@"
 # Required param: -i dev in $DEV
 source ${basedir}/parameters.sh
 
+[ -z "$COUNT" ] && COUNT="100000" # Zero means indefinitely
+
 # Base Config
 DELAY="0"        # Zero means max speed
-COUNT="100000"   # Zero means indefinitely
 [ -z "$CLONE_SKB" ] && CLONE_SKB="0"
 
 # Flow variation random source port between min and max
@@ -32,7 +33,7 @@ fi
 pg_ctrl "reset"
 
 # Threads are specified with parameter -t value in $THREADS
-for ((thread = 0; thread < $THREADS; thread++)); do
+for ((thread = $F_THREAD; thread <= $L_THREAD; thread++)); do
     # The device name is extended with @name, using thread number to
     # make then unique, but any name will do.
     dev=${DEV}@${thread}
@@ -70,7 +71,7 @@ pg_ctrl "start"
 echo "Done" >&2
 
 # Print results
-for ((thread = 0; thread < $THREADS; thread++)); do
+for ((thread = $F_THREAD; thread <= $L_THREAD; thread++)); do
     dev=${DEV}@${thread}
     echo "Device: $dev"
     cat /proc/net/pktgen/$dev | grep -A2 "Result:"

samples/pktgen/pktgen_sample03_burst_single_flow.sh

@@ -31,16 +31,16 @@ fi
 [ -z "$DST_MAC" ]   && DST_MAC="90:e2:ba:ff:ff:ff"
 [ -z "$BURST" ]     && BURST=32
 [ -z "$CLONE_SKB" ] && CLONE_SKB="100000"
+[ -z "$COUNT" ]     && COUNT="0" # Zero means indefinitely
 
 # Base Config
 DELAY="0"  # Zero means max speed
-COUNT="0"  # Zero means indefinitely
 
 # General cleanup everything since last run
 pg_ctrl "reset"
 
 # Threads are specified with parameter -t value in $THREADS
-for ((thread = 0; thread < $THREADS; thread++)); do
+for ((thread = $F_THREAD; thread <= $L_THREAD; thread++)); do
     dev=${DEV}@${thread}
 
     # Add remove all other devices and add_device $dev to thread
@@ -71,7 +71,7 @@ done
 # Run if user hits control-c
 function control_c() {
     # Print results
-    for ((thread = 0; thread < $THREADS; thread++)); do
+    for ((thread = $F_THREAD; thread <= $L_THREAD; thread++)); do
 	dev=${DEV}@${thread}
 	echo "Device: $dev"
 	cat /proc/net/pktgen/$dev | grep -A2 "Result:"

samples/pktgen/pktgen_sample04_many_flows.sh

@@ -15,6 +15,7 @@ source ${basedir}/parameters.sh
 [ -z "$DEST_IP" ]   && DEST_IP="198.18.0.42"
 [ -z "$DST_MAC" ]   && DST_MAC="90:e2:ba:ff:ff:ff"
 [ -z "$CLONE_SKB" ] && CLONE_SKB="0"
+[ -z "$COUNT" ]     && COUNT="0" # Zero means indefinitely
 
 # NOTICE:  Script specific settings
 # =======
@@ -26,7 +27,6 @@ source ${basedir}/parameters.sh
 
 # Base Config
 DELAY="0"  # Zero means max speed
-COUNT="0"  # Zero means indefinitely
 
 if [[ -n "$BURST" ]]; then
     err 1 "Bursting not supported for this mode"
@@ -36,7 +36,7 @@ fi
 pg_ctrl "reset"
 
 # Threads are specified with parameter -t value in $THREADS
-for ((thread = 0; thread < $THREADS; thread++)); do
+for ((thread = $F_THREAD; thread <= $L_THREAD; thread++)); do
     dev=${DEV}@${thread}
 
     # Add remove all other devices and add_device $dev to thread
@@ -78,7 +78,7 @@ done
 # Run if user hits control-c
 function print_result() {
     # Print results
-    for ((thread = 0; thread < $THREADS; thread++)); do
+    for ((thread = $F_THREAD; thread <= $L_THREAD; thread++)); do
 	dev=${DEV}@${thread}
 	echo "Device: $dev"
 	cat /proc/net/pktgen/$dev | grep -A2 "Result:"

samples/pktgen/pktgen_sample05_flow_per_thread.sh

@@ -20,17 +20,17 @@ source ${basedir}/parameters.sh
 [ -z "$DST_MAC" ]   && DST_MAC="90:e2:ba:ff:ff:ff"
 [ -z "$CLONE_SKB" ] && CLONE_SKB="0"
 [ -z "$BURST" ]     && BURST=32
+[ -z "$COUNT" ]     && COUNT="0" # Zero means indefinitely
 
 
 # Base Config
 DELAY="0"  # Zero means max speed
-COUNT="0"  # Zero means indefinitely
 
 # General cleanup everything since last run
 pg_ctrl "reset"
 
 # Threads are specified with parameter -t value in $THREADS
-for ((thread = 0; thread < $THREADS; thread++)); do
+for ((thread = $F_THREAD; thread <= $L_THREAD; thread++)); do
     dev=${DEV}@${thread}
 
     # Add remove all other devices and add_device $dev to thread
@@ -66,7 +66,7 @@ done
 # Run if user hits control-c
 function print_result() {
     # Print results
-    for ((thread = 0; thread < $THREADS; thread++)); do
+    for ((thread = $F_THREAD; thread <= $L_THREAD; thread++)); do
 	dev=${DEV}@${thread}
 	echo "Device: $dev"
 	cat /proc/net/pktgen/$dev | grep -A2 "Result:"