Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
  HID: remove compat stuff
  HID: constify arrays of struct apple_key_translation
  HID: add support for Kye/Genius Ergo 525V
  HID: Support Apple mini aluminum keyboard
  HID: support for Kensington slimblade device
  HID: DragonRise game controller force feedback driver
  HID: add support for another version of 0e8f:0003 device in hid-pl
  HID: fix race between usb_register_dev() and hiddev_open()
  HID: bring back possibility to specify vid/pid ignore on module load
  HID: make HID_DEBUG defaults consistent
  HID: autosuspend -- fix lockup of hid on reset
  HID: hid_reset_resume() needs to be defined only when CONFIG_PM is set
  HID: fix USB HID devices after STD with autosuspend
  HID: do not try to compile PM code with CONFIG_PM unset
  HID: autosuspend support for USB HID

Documentation/feature-removal-schedule.txt

@@ -283,13 +283,6 @@ Who:	Glauber Costa <gcosta@redhat.com>
 
 ---------------------------
 
-What:	remove HID compat support
-When:	2.6.29
-Why:	needed only as a temporary solution until distros fix themselves up
-Who:	Jiri Slaby <jirislaby@gmail.com>
-
----------------------------
-
 What: print_fn_descriptor_symbol()
 When: October 2009
 Why:  The %pF vsprintf format provides the same functionality in a

drivers/hid/Kconfig

@@ -29,11 +29,11 @@ config HID
 
 	  For docs and specs, see http://www.usb.org/developers/hidpage/
 
-	  If unsure, say Y
+	  If unsure, say Y.
 
 config HID_DEBUG
 	bool "HID debugging support"
-	default y if !EMBEDDED
+	default y
 	depends on HID
 	---help---
 	This option lets the HID layer output diagnostics about its internal
@@ -44,7 +44,7 @@ config HID_DEBUG
 	This feature is useful for those who are either debugging the HID parser
 	or any HID hardware device.
 
-	If unsure, say N
+	If unsure, say Y.
 
 config HIDRAW
 	bool "/dev/hidraw raw HID device support"
@@ -70,18 +70,6 @@ source "drivers/hid/usbhid/Kconfig"
 menu "Special HID drivers"
 	depends on HID
 
-config HID_COMPAT
-	bool "Load all HID drivers on hid core load"
-	default y
-	---help---
-	Compatible option for older userspace. If you have system without udev
-	support of module loading through aliases and also old
-	module-init-tools which can't handle hid bus, choose Y here. Otherwise
-	say N. If you say N and your userspace is old enough, the only
-	functionality you lose is modules autoloading.
-
-	If unsure, say Y.
-
 config HID_A4TECH
 	tristate "A4 tech" if EMBEDDED
 	depends on USB_HID
@@ -128,6 +116,14 @@ config HID_CYPRESS
 	---help---
 	Support for cypress mouse and barcode readers.
 
+config DRAGONRISE_FF
+	tristate "DragonRise Inc. force feedback support"
+	depends on USB_HID
+	select INPUT_FF_MEMLESS
+	---help---
+	Say Y here if you want to enable force feedback support for DragonRise Inc.
+	game controllers.
+
 config HID_EZKEY
 	tristate "Ezkey" if EMBEDDED
 	depends on USB_HID
@@ -135,6 +131,13 @@ config HID_EZKEY
 	---help---
 	Support for Ezkey BTC 8193 keyboard.
 
+config HID_KYE
+	tristate "Kye" if EMBEDDED
+	depends on USB_HID
+	default !EMBEDDED
+	---help---
+	Support for Kye/Genius Ergo Mouse.
+
 config HID_GYRATION
 	tristate "Gyration" if EMBEDDED
 	depends on USB_HID
@@ -142,6 +145,13 @@ config HID_GYRATION
 	---help---
 	Support for Gyration remote control.
 
+config HID_KENSINGTON
+	tristate "Kensington" if EMBEDDED
+	depends on USB_HID
+	default !EMBEDDED
+	---help---
+	Support for Kensington Slimblade Trackball.
+
 config HID_LOGITECH
 	tristate "Logitech" if EMBEDDED
 	depends on USB_HID

drivers/hid/Makefile

@@ -8,10 +8,6 @@ obj-$(CONFIG_HID)		+= hid.o
 hid-$(CONFIG_HID_DEBUG)		+= hid-debug.o
 hid-$(CONFIG_HIDRAW)		+= hidraw.o
 
-ifdef CONFIG_HID_COMPAT
-obj-m				+= hid-dummy.o
-endif
-
 hid-logitech-objs		:= hid-lg.o
 ifdef CONFIG_LOGITECH_FF
 	hid-logitech-objs	+= hid-lgff.o
@@ -26,8 +22,11 @@ obj-$(CONFIG_HID_BELKIN)	+= hid-belkin.o
 obj-$(CONFIG_HID_CHERRY)	+= hid-cherry.o
 obj-$(CONFIG_HID_CHICONY)	+= hid-chicony.o
 obj-$(CONFIG_HID_CYPRESS)	+= hid-cypress.o
+obj-$(CONFIG_DRAGONRISE_FF)	+= hid-drff.o
 obj-$(CONFIG_HID_EZKEY)		+= hid-ezkey.o
 obj-$(CONFIG_HID_GYRATION)	+= hid-gyration.o
+obj-$(CONFIG_HID_KENSINGTON)	+= hid-kensington.o
+obj-$(CONFIG_HID_KYE)		+= hid-kye.o
 obj-$(CONFIG_HID_LOGITECH)	+= hid-logitech.o
 obj-$(CONFIG_HID_MICROSOFT)	+= hid-microsoft.o
 obj-$(CONFIG_HID_MONTEREY)	+= hid-monterey.o

drivers/hid/hid-a4tech.c

@@ -158,5 +158,3 @@ static void a4_exit(void)
 module_init(a4_init);
 module_exit(a4_exit);
 MODULE_LICENSE("GPL");
-
-HID_COMPAT_LOAD_DRIVER(a4tech);

drivers/hid/hid-apple.c

@@ -53,7 +53,7 @@ struct apple_key_translation {
 	u8 flags;
 };
 
-static struct apple_key_translation apple_fn_keys[] = {
+static const struct apple_key_translation apple_fn_keys[] = {
 	{ KEY_BACKSPACE, KEY_DELETE },
 	{ KEY_ENTER,	KEY_INSERT },
 	{ KEY_F1,	KEY_BRIGHTNESSDOWN, APPLE_FLAG_FKEY },
@@ -75,7 +75,7 @@ static struct apple_key_translation apple_fn_keys[] = {
 	{ }
 };
 
-static struct apple_key_translation powerbook_fn_keys[] = {
+static const struct apple_key_translation powerbook_fn_keys[] = {
 	{ KEY_BACKSPACE, KEY_DELETE },
 	{ KEY_F1,	KEY_BRIGHTNESSDOWN,     APPLE_FLAG_FKEY },
 	{ KEY_F2,	KEY_BRIGHTNESSUP,       APPLE_FLAG_FKEY },
@@ -94,7 +94,7 @@ static struct apple_key_translation powerbook_fn_keys[] = {
 	{ }
 };
 
-static struct apple_key_translation powerbook_numlock_keys[] = {
+static const struct apple_key_translation powerbook_numlock_keys[] = {
 	{ KEY_J,	KEY_KP1 },
 	{ KEY_K,	KEY_KP2 },
 	{ KEY_L,	KEY_KP3 },
@@ -117,16 +117,16 @@ static struct apple_key_translation powerbook_numlock_keys[] = {
 	{ }
 };
 
-static struct apple_key_translation apple_iso_keyboard[] = {
+static const struct apple_key_translation apple_iso_keyboard[] = {
 	{ KEY_GRAVE,	KEY_102ND },
 	{ KEY_102ND,	KEY_GRAVE },
 	{ }
 };
 
-static struct apple_key_translation *apple_find_translation(
-		struct apple_key_translation *table, u16 from)
+static const struct apple_key_translation *apple_find_translation(
+		const struct apple_key_translation *table, u16 from)
 {
-	struct apple_key_translation *trans;
+	const struct apple_key_translation *trans;
 
 	/* Look for the translation */
 	for (trans = table; trans->from; trans++)
@@ -140,7 +140,7 @@ static int hidinput_apple_event(struct hid_device *hid, struct input_dev *input,
 		struct hid_usage *usage, __s32 value)
 {
 	struct apple_sc *asc = hid_get_drvdata(hid);
-	struct apple_key_translation *trans;
+	const struct apple_key_translation *trans;
 
 	if (usage->code == KEY_FN) {
 		asc->fn_on = !!value;
@@ -253,7 +253,7 @@ static void apple_report_fixup(struct hid_device *hdev, __u8 *rdesc,
 
 static void apple_setup_input(struct input_dev *input)
 {
-	struct apple_key_translation *trans;
+	const struct apple_key_translation *trans;
 
 	set_bit(KEY_NUMLOCK, input->keybit);
 
@@ -387,6 +387,12 @@ static const struct hid_device_id apple_devices[] = {
 	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER4_JIS),
 		.driver_data = APPLE_NUMLOCK_EMULATION | APPLE_HAS_FN |
 			APPLE_RDESC_JIS },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_MINI_ANSI),
+		.driver_data = APPLE_HAS_FN },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_MINI_ISO),
+		.driver_data = APPLE_HAS_FN | APPLE_ISO_KEYBOARD },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_MINI_JIS),
+		.driver_data = APPLE_HAS_FN },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_ANSI),
 		.driver_data = APPLE_HAS_FN },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_ISO),
@@ -468,5 +474,3 @@ static void apple_exit(void)
 module_init(apple_init);
 module_exit(apple_exit);
 MODULE_LICENSE("GPL");
-
-HID_COMPAT_LOAD_DRIVER(apple);

drivers/hid/hid-belkin.c

@@ -101,5 +101,3 @@ static void belkin_exit(void)
 module_init(belkin_init);
 module_exit(belkin_exit);
 MODULE_LICENSE("GPL");
-
-HID_COMPAT_LOAD_DRIVER(belkin);

drivers/hid/hid-cherry.c

@@ -83,5 +83,3 @@ static void ch_exit(void)
 module_init(ch_init);
 module_exit(ch_exit);
 MODULE_LICENSE("GPL");
-
-HID_COMPAT_LOAD_DRIVER(cherry);

drivers/hid/hid-chicony.c

@@ -76,5 +76,3 @@ static void ch_exit(void)
 module_init(ch_init);
 module_exit(ch_exit);
 MODULE_LICENSE("GPL");
-
-HID_COMPAT_LOAD_DRIVER(chicony);

drivers/hid/hid-core.c

@@ -1236,6 +1236,9 @@ static const struct hid_device_id hid_blacklist[] = {
 	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER4_ANSI) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER4_ISO) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER4_JIS) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_MINI_ANSI) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_MINI_ISO) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_MINI_JIS) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_ANSI) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_ISO) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_JIS) },
@@ -1262,6 +1265,7 @@ static const struct hid_device_id hid_blacklist[] = {
 	{ HID_USB_DEVICE(USB_VENDOR_ID_CYPRESS, USB_DEVICE_ID_CYPRESS_BARCODE_1) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_CYPRESS, USB_DEVICE_ID_CYPRESS_BARCODE_2) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_CYPRESS, USB_DEVICE_ID_CYPRESS_MOUSE) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_DRAGONRISE, 0x0006) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_EZKEY, USB_DEVICE_ID_BTC_8193) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_GAMERON, USB_DEVICE_ID_GAMERON_DUAL_PSX_ADAPTOR) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_GAMERON, USB_DEVICE_ID_GAMERON_DUAL_PCS_ADAPTOR) },
@@ -1269,6 +1273,8 @@ static const struct hid_device_id hid_blacklist[] = {
 	{ HID_USB_DEVICE(USB_VENDOR_ID_GREENASIA, 0x0012) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_GYRATION, USB_DEVICE_ID_GYRATION_REMOTE) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_GYRATION, USB_DEVICE_ID_GYRATION_REMOTE_2) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_KENSINGTON, USB_DEVICE_ID_KS_SLIMBLADE) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_KYE, USB_DEVICE_ID_KYE_ERGO_525V) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_LABTEC, USB_DEVICE_ID_LABTEC_WIRELESS_KEYBOARD) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_MX3000_RECEIVER) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_S510_RECEIVER) },
@@ -1813,14 +1819,21 @@ void hid_unregister_driver(struct hid_driver *hdrv)
 }
 EXPORT_SYMBOL_GPL(hid_unregister_driver);
 
-#ifdef CONFIG_HID_COMPAT
-static void hid_compat_load(struct work_struct *ws)
+int hid_check_keys_pressed(struct hid_device *hid)
 {
-	request_module("hid-dummy");
+	struct hid_input *hidinput;
+	int i;
+
+	list_for_each_entry(hidinput, &hid->inputs, list) {
+		for (i = 0; i < BITS_TO_LONGS(KEY_MAX); i++)
+			if (hidinput->input->key[i])
+				return 1;
+	}
+
+	return 0;
 }
-static DECLARE_WORK(hid_compat_work, hid_compat_load);
-static struct workqueue_struct *hid_compat_wq;
-#endif
+
+EXPORT_SYMBOL_GPL(hid_check_keys_pressed);
 
 static int __init hid_init(void)
 {
@@ -1836,15 +1849,6 @@ static int __init hid_init(void)
 	if (ret)
 		goto err_bus;
 
-#ifdef CONFIG_HID_COMPAT
-	hid_compat_wq = create_singlethread_workqueue("hid_compat");
-	if (!hid_compat_wq) {
-		hidraw_exit();
-		goto err;
-	}
-	queue_work(hid_compat_wq, &hid_compat_work);
-#endif
-
 	return 0;
 err_bus:
 	bus_unregister(&hid_bus_type);
@@ -1854,9 +1858,6 @@ static int __init hid_init(void)
 
 static void __exit hid_exit(void)
 {
-#ifdef CONFIG_HID_COMPAT
-	destroy_workqueue(hid_compat_wq);
-#endif
 	hidraw_exit();
 	bus_unregister(&hid_bus_type);
 }

drivers/hid/hid-cypress.c

@@ -154,5 +154,3 @@ static void cp_exit(void)
 module_init(cp_init);
 module_exit(cp_exit);
 MODULE_LICENSE("GPL");
-
-HID_COMPAT_LOAD_DRIVER(cypress);

drivers/hid/hid-drff.c

+/*
+ * Force feedback support for DragonRise Inc. game controllers
+ *
+ * From what I have gathered, these devices are mass produced in China and are
+ * distributed under several vendors. They often share the same design as
+ * the original PlayStation DualShock controller.
+ *
+ * 0079:0006 "DragonRise Inc.   Generic   USB  Joystick  "
+ *  - tested with a Tesun USB-703 game controller.
+ *
+ * Copyright (c) 2009 Richard Walmsley <richwalm@gmail.com>
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/input.h>
+#include <linux/usb.h>
+#include <linux/hid.h>
+
+#include "hid-ids.h"
+#include "usbhid/usbhid.h"
+
+struct drff_device {
+	struct hid_report *report;
+};
+
+static int drff_play(struct input_dev *dev, void *data,
+				 struct ff_effect *effect)
+{
+	struct hid_device *hid = input_get_drvdata(dev);
+	struct drff_device *drff = data;
+	int strong, weak;
+
+	strong = effect->u.rumble.strong_magnitude;
+	weak = effect->u.rumble.weak_magnitude;
+
+	dbg_hid("called with 0x%04x 0x%04x", strong, weak);
+
+	if (strong || weak) {
+		strong = strong * 0xff / 0xffff;
+		weak = weak * 0xff / 0xffff;
+
+		/* While reverse engineering this device, I found that when
+		   this value is set, it causes the strong rumble to function
+		   at a near maximum speed, so we'll bypass it. */
+		if (weak == 0x0a)
+			weak = 0x0b;
+
+		drff->report->field[0]->value[0] = 0x51;
+		drff->report->field[0]->value[1] = 0x00;
+		drff->report->field[0]->value[2] = weak;
+		drff->report->field[0]->value[4] = strong;
+		usbhid_submit_report(hid, drff->report, USB_DIR_OUT);
+
+		drff->report->field[0]->value[0] = 0xfa;
+		drff->report->field[0]->value[1] = 0xfe;
+	} else {
+		drff->report->field[0]->value[0] = 0xf3;
+		drff->report->field[0]->value[1] = 0x00;
+	}
+
+	drff->report->field[0]->value[2] = 0x00;
+	drff->report->field[0]->value[4] = 0x00;
+	dbg_hid("running with 0x%02x 0x%02x", strong, weak);
+	usbhid_submit_report(hid, drff->report, USB_DIR_OUT);
+
+	return 0;
+}
+
+static int drff_init(struct hid_device *hid)
+{
+	struct drff_device *drff;
+	struct hid_report *report;
+	struct hid_input *hidinput = list_first_entry(&hid->inputs,
+						struct hid_input, list);
+	struct list_head *report_list =
+			&hid->report_enum[HID_OUTPUT_REPORT].report_list;
+	struct input_dev *dev = hidinput->input;
+	int error;
+
+	if (list_empty(report_list)) {
+		dev_err(&hid->dev, "no output reports found\n");
+		return -ENODEV;
+	}
+
+	report = list_first_entry(report_list, struct hid_report, list);
+	if (report->maxfield < 1) {
+		dev_err(&hid->dev, "no fields in the report\n");
+		return -ENODEV;
+	}
+
+	if (report->field[0]->report_count < 7) {
+		dev_err(&hid->dev, "not enough values in the field\n");
+		return -ENODEV;
+	}
+
+	drff = kzalloc(sizeof(struct drff_device), GFP_KERNEL);
+	if (!drff)
+		return -ENOMEM;
+
+	set_bit(FF_RUMBLE, dev->ffbit);
+
+	error = input_ff_create_memless(dev, drff, drff_play);
+	if (error) {
+		kfree(drff);
+		return error;
+	}
+
+	drff->report = report;
+	drff->report->field[0]->value[0] = 0xf3;
+	drff->report->field[0]->value[1] = 0x00;
+	drff->report->field[0]->value[2] = 0x00;
+	drff->report->field[0]->value[3] = 0x00;
+	drff->report->field[0]->value[4] = 0x00;
+	drff->report->field[0]->value[5] = 0x00;
+	drff->report->field[0]->value[6] = 0x00;
+	usbhid_submit_report(hid, drff->report, USB_DIR_OUT);
+
+	dev_info(&hid->dev, "Force Feedback for DragonRise Inc. game "
+	       "controllers by Richard Walmsley <richwalm@gmail.com>\n");
+
+	return 0;
+}
+
+static int dr_probe(struct hid_device *hdev, const struct hid_device_id *id)
+{
+	int ret;
+
+	dev_dbg(&hdev->dev, "DragonRise Inc. HID hardware probe...");
+
+	ret = hid_parse(hdev);
+	if (ret) {
+		dev_err(&hdev->dev, "parse failed\n");
+		goto err;
+	}
+
+	ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT & ~HID_CONNECT_FF);
+	if (ret) {
+		dev_err(&hdev->dev, "hw start failed\n");
+		goto err;
+	}
+
+	drff_init(hdev);
+
+	return 0;
+err:
+	return ret;
+}
+
+static const struct hid_device_id dr_devices[] = {
+	{ HID_USB_DEVICE(USB_VENDOR_ID_DRAGONRISE, 0x0006),  },
+	{ }
+};
+MODULE_DEVICE_TABLE(hid, dr_devices);
+
+static struct hid_driver dr_driver = {
+	.name = "dragonrise",
+	.id_table = dr_devices,
+	.probe = dr_probe,
+};
+
+static int __init dr_init(void)
+{
+	return hid_register_driver(&dr_driver);
+}
+
+static void __exit dr_exit(void)
+{
+	hid_unregister_driver(&dr_driver);
+}
+
+module_init(dr_init);
+module_exit(dr_exit);
+MODULE_LICENSE("GPL");

drivers/hid/hid-dummy.c

-#include <linux/autoconf.h>
-#include <linux/module.h>
-#include <linux/hid.h>
-
-static int __init hid_dummy_init(void)
-{
-#ifdef CONFIG_HID_A4TECH_MODULE
-	HID_COMPAT_CALL_DRIVER(a4tech);
-#endif
-#ifdef CONFIG_HID_APPLE_MODULE
-	HID_COMPAT_CALL_DRIVER(apple);
-#endif
-#ifdef CONFIG_HID_BELKIN_MODULE
-	HID_COMPAT_CALL_DRIVER(belkin);
-#endif
-#ifdef CONFIG_HID_BRIGHT_MODULE
-	HID_COMPAT_CALL_DRIVER(bright);
-#endif
-#ifdef CONFIG_HID_CHERRY_MODULE
-	HID_COMPAT_CALL_DRIVER(cherry);
-#endif
-#ifdef CONFIG_HID_CHICONY_MODULE
-	HID_COMPAT_CALL_DRIVER(chicony);
-#endif
-#ifdef CONFIG_HID_CYPRESS_MODULE
-	HID_COMPAT_CALL_DRIVER(cypress);
-#endif
-#ifdef CONFIG_HID_DELL_MODULE
-	HID_COMPAT_CALL_DRIVER(dell);
-#endif
-#ifdef CONFIG_HID_EZKEY_MODULE
-	HID_COMPAT_CALL_DRIVER(ezkey);
-#endif
-#ifdef CONFIG_HID_GYRATION_MODULE
-	HID_COMPAT_CALL_DRIVER(gyration);
-#endif
-#ifdef CONFIG_HID_LOGITECH_MODULE
-	HID_COMPAT_CALL_DRIVER(logitech);
-#endif
-#ifdef CONFIG_HID_MICROSOFT_MODULE
-	HID_COMPAT_CALL_DRIVER(microsoft);
-#endif
-#ifdef CONFIG_HID_MONTEREY_MODULE
-	HID_COMPAT_CALL_DRIVER(monterey);
-#endif
-#ifdef CONFIG_HID_NTRIG_MODULE
-	HID_COMPAT_CALL_DRIVER(ntrig);
-#endif
-#ifdef CONFIG_HID_PANTHERLORD_MODULE
-	HID_COMPAT_CALL_DRIVER(pantherlord);
-#endif
-#ifdef CONFIG_HID_PETALYNX_MODULE
-	HID_COMPAT_CALL_DRIVER(petalynx);
-#endif
-#ifdef CONFIG_HID_SAMSUNG_MODULE
-	HID_COMPAT_CALL_DRIVER(samsung);
-#endif
-#ifdef CONFIG_HID_SONY_MODULE
-	HID_COMPAT_CALL_DRIVER(sony);
-#endif
-#ifdef CONFIG_HID_SUNPLUS_MODULE
-	HID_COMPAT_CALL_DRIVER(sunplus);
-#endif
-#ifdef CONFIG_GREENASIA_FF_MODULE
-	HID_COMPAT_CALL_DRIVER(greenasia);
-#endif
-#ifdef CONFIG_THRUSTMASTER_FF_MODULE
-	HID_COMPAT_CALL_DRIVER(thrustmaster);
-#endif
-#ifdef CONFIG_ZEROPLUS_FF_MODULE
-	HID_COMPAT_CALL_DRIVER(zeroplus);
-#endif
-
-	return -EIO;
-}
-module_init(hid_dummy_init);
-
-MODULE_LICENSE("GPL");

drivers/hid/hid-ezkey.c

@@ -91,5 +91,3 @@ static void ez_exit(void)
 module_init(ez_init);
 module_exit(ez_exit);
 MODULE_LICENSE("GPL");
-
-HID_COMPAT_LOAD_DRIVER(ezkey);

drivers/hid/hid-gaff.c

@@ -181,5 +181,3 @@ static void __exit ga_exit(void)
 module_init(ga_init);
 module_exit(ga_exit);
 MODULE_LICENSE("GPL");
-
-HID_COMPAT_LOAD_DRIVER(greenasia);

drivers/hid/hid-gyration.c

@@ -94,5 +94,3 @@ static void gyration_exit(void)
 module_init(gyration_init);
 module_exit(gyration_exit);
 MODULE_LICENSE("GPL");
-
-HID_COMPAT_LOAD_DRIVER(gyration);

drivers/hid/hid-ids.h

@@ -67,6 +67,9 @@
 #define USB_DEVICE_ID_APPLE_GEYSER4_ANSI	0x021a
 #define USB_DEVICE_ID_APPLE_GEYSER4_ISO	0x021b
 #define USB_DEVICE_ID_APPLE_GEYSER4_JIS	0x021c
+#define USB_DEVICE_ID_APPLE_ALU_MINI_ANSI	0x021d
+#define USB_DEVICE_ID_APPLE_ALU_MINI_ISO	0x021e
+#define USB_DEVICE_ID_APPLE_ALU_MINI_JIS	0x021f
 #define USB_DEVICE_ID_APPLE_ALU_ANSI	0x0220
 #define USB_DEVICE_ID_APPLE_ALU_ISO	0x0221
 #define USB_DEVICE_ID_APPLE_ALU_JIS	0x0222
@@ -148,6 +151,8 @@
 #define USB_VENDOR_ID_DMI		0x0c0b
 #define USB_DEVICE_ID_DMI_ENC		0x5fab
 
+#define USB_VENDOR_ID_DRAGONRISE	0x0079
+
 #define USB_VENDOR_ID_ELO		0x04E7
 #define USB_DEVICE_ID_ELO_TS2700	0x0020
 
@@ -272,6 +277,9 @@
 #define USB_DEVICE_ID_LD_POWERCONTROL	0x2030
 #define USB_DEVICE_ID_LD_MACHINETEST	0x2040
 
+#define USB_VENDOR_ID_KENSINGTON	0x047d
+#define USB_DEVICE_ID_KS_SLIMBLADE	0x2041
+
 #define USB_VENDOR_ID_LOGITECH		0x046d
 #define USB_DEVICE_ID_LOGITECH_RECEIVER	0xc101
 #define USB_DEVICE_ID_LOGITECH_HARMONY_FIRST  0xc110
@@ -418,6 +426,8 @@
 #define USB_VENDOR_ID_ZEROPLUS		0x0c12
 
 #define USB_VENDOR_ID_KYE		0x0458
+#define USB_DEVICE_ID_KYE_ERGO_525V	0x0087
 #define USB_DEVICE_ID_KYE_GPEN_560	0x5003
 
+
 #endif

drivers/hid/hid-kensington.c

+/*
+ *  HID driver for Kensigton Slimblade Trackball
+ *
+ *  Copyright (c) 2009 Jiri Kosina
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ */
+
+#include <linux/device.h>
+#include <linux/input.h>
+#include <linux/hid.h>
+#include <linux/module.h>
+
+#include "hid-ids.h"
+
+#define ks_map_key(c)	hid_map_usage(hi, usage, bit, max, EV_KEY, (c))
+
+static int ks_input_mapping(struct hid_device *hdev, struct hid_input *hi,
+		struct hid_field *field, struct hid_usage *usage,
+		unsigned long **bit, int *max)
+{
+	if ((usage->hid & HID_USAGE_PAGE) != HID_UP_MSVENDOR)
+		return 0;
+
+	switch (usage->hid & HID_USAGE) {
+	case 0x01: ks_map_key(BTN_MIDDLE);	break;
+	case 0x02: ks_map_key(BTN_SIDE);	break;
+	default:
+		return 0;
+	}
+	return 1;
+}
+
+static const struct hid_device_id ks_devices[] = {
+	{ HID_USB_DEVICE(USB_VENDOR_ID_KENSINGTON, USB_DEVICE_ID_KS_SLIMBLADE) },
+	{ }
+};
+MODULE_DEVICE_TABLE(hid, ks_devices);
+
+static struct hid_driver ks_driver = {
+	.name = "kensington",
+	.id_table = ks_devices,
+	.input_mapping = ks_input_mapping,
+};
+
+static int ks_init(void)
+{
+	return hid_register_driver(&ks_driver);
+}
+
+static void ks_exit(void)
+{
+	hid_unregister_driver(&ks_driver);
+}
+
+module_init(ks_init);
+module_exit(ks_exit);
+MODULE_LICENSE("GPL");

drivers/hid/hid-kye.c

+/*
+ *  HID driver for Kye/Genius devices not fully compliant with HID standard
+ *
+ *  Copyright (c) 2009 Jiri Kosina
+ *  Copyright (c) 2009 Tomas Hanak
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ */
+
+#include <linux/device.h>
+#include <linux/hid.h>
+#include <linux/module.h>
+
+#include "hid-ids.h"
+
+/* the fixups that need to be done:
+ *   - change led usage page to button for extra buttons
+ *   - report size 8 count 1 must be size 1 count 8 for button bitfield
+ *   - change the button usage range to 4-7 for the extra buttons
+ */
+static void kye_report_fixup(struct hid_device *hdev, __u8 *rdesc,
+		unsigned int rsize)
+{
+	if (rsize >= 74 &&
+		rdesc[61] == 0x05 && rdesc[62] == 0x08 &&
+		rdesc[63] == 0x19 && rdesc[64] == 0x08 &&
+		rdesc[65] == 0x29 && rdesc[66] == 0x0f &&
+		rdesc[71] == 0x75 && rdesc[72] == 0x08 &&
+		rdesc[73] == 0x95 && rdesc[74] == 0x01) {
+		dev_info(&hdev->dev, "fixing up Kye/Genius Ergo Mouse report "
+				"descriptor\n");
+		rdesc[62] = 0x09;
+		rdesc[64] = 0x04;
+		rdesc[66] = 0x07;
+		rdesc[72] = 0x01;
+		rdesc[74] = 0x08;
+	}
+}
+
+static const struct hid_device_id kye_devices[] = {
+	{ HID_USB_DEVICE(USB_VENDOR_ID_KYE, USB_DEVICE_ID_KYE_ERGO_525V) },
+	{ }
+};
+MODULE_DEVICE_TABLE(hid, kye_devices);
+
+static struct hid_driver kye_driver = {
+	.name = "kye",
+	.id_table = kye_devices,
+	.report_fixup = kye_report_fixup,
+};
+
+static int kye_init(void)
+{
+	return hid_register_driver(&kye_driver);
+}
+
+static void kye_exit(void)
+{
+	hid_unregister_driver(&kye_driver);
+}
+
+module_init(kye_init);
+module_exit(kye_exit);
+MODULE_LICENSE("GPL");

drivers/hid/hid-lg.c

@@ -326,5 +326,3 @@ static void lg_exit(void)
 module_init(lg_init);
 module_exit(lg_exit);
 MODULE_LICENSE("GPL");
-
-HID_COMPAT_LOAD_DRIVER(logitech);

drivers/hid/hid-microsoft.c

@@ -210,5 +210,3 @@ static void ms_exit(void)
 module_init(ms_init);
 module_exit(ms_exit);
 MODULE_LICENSE("GPL");
-
-HID_COMPAT_LOAD_DRIVER(microsoft);

drivers/hid/hid-monterey.c

@@ -78,5 +78,3 @@ static void mr_exit(void)
 module_init(mr_init);
 module_exit(mr_exit);
 MODULE_LICENSE("GPL");
-
-HID_COMPAT_LOAD_DRIVER(monterey);

drivers/hid/hid-ntrig.c

@@ -78,5 +78,3 @@ static void ntrig_exit(void)
 module_init(ntrig_init);
 module_exit(ntrig_exit);
 MODULE_LICENSE("GPL");
-
-HID_COMPAT_LOAD_DRIVER(ntrig);

drivers/hid/hid-petalynx.c

@@ -118,5 +118,3 @@ static void pl_exit(void)
 module_init(pl_init);
 module_exit(pl_exit);
 MODULE_LICENSE("GPL");
-
-HID_COMPAT_LOAD_DRIVER(petalynx);

drivers/hid/hid-pl.c

@@ -9,9 +9,12 @@
  *   - contains two reports, one for each port (HID_QUIRK_MULTI_INPUT)
  *
  *  0e8f:0003 "GreenAsia Inc.    USB Joystick     "
- *   - tested with K??ng Gaming gamepad
+ *   - tested with Knig Gaming gamepad
  *
- *  Copyright (c) 2007 Anssi Hannula <anssi.hannula@gmail.com>
+ *  0e8f:0003 "GASIA USB Gamepad"
+ *   - another version of the Knig gamepad
+ *
+ *  Copyright (c) 2007, 2009 Anssi Hannula <anssi.hannula@gmail.com>
  */
 
 /*
@@ -46,6 +49,8 @@
 
 struct plff_device {
 	struct hid_report *report;
+	s32 *strong;
+	s32 *weak;
 };
 
 static int hid_plff_play(struct input_dev *dev, void *data,
@@ -62,8 +67,8 @@ static int hid_plff_play(struct input_dev *dev, void *data,
 	left = left * 0x7f / 0xffff;
 	right = right * 0x7f / 0xffff;
 
-	plff->report->field[0]->value[2] = left;
-	plff->report->field[0]->value[3] = right;
+	*plff->strong = left;
+	*plff->weak = right;
 	debug("running with 0x%02x 0x%02x", left, right);
 	usbhid_submit_report(hid, plff->report, USB_DIR_OUT);
 
@@ -80,6 +85,8 @@ static int plff_init(struct hid_device *hid)
 	struct list_head *report_ptr = report_list;
 	struct input_dev *dev;
 	int error;
+	s32 *strong;
+	s32 *weak;
 
 	/* The device contains one output report per physical device, all
 	   containing 1 field, which contains 4 ff00.0002 usages and 4 16bit
@@ -87,7 +94,12 @@ static int plff_init(struct hid_device *hid)
 
 	   The input reports also contain a field which contains
 	   8 ff00.0001 usages and 8 boolean values. Their meaning is
-	   currently unknown. */
+	   currently unknown.
+	   
+	   A version of the 0e8f:0003 exists that has all the values in
+	   separate fields and misses the extra input field, thus resembling
+	   Zeroplus (hid-zpff) devices.
+	*/
 
 	if (list_empty(report_list)) {
 		dev_err(&hid->dev, "no output reports found\n");
@@ -110,8 +122,21 @@ static int plff_init(struct hid_device *hid)
 			return -ENODEV;
 		}
 
-		if (report->field[0]->report_count < 4) {
-			dev_err(&hid->dev, "not enough values in the field\n");
+		if (report->field[0]->report_count >= 4) {
+			report->field[0]->value[0] = 0x00;
+			report->field[0]->value[1] = 0x00;
+			strong = &report->field[0]->value[2];
+			weak = &report->field[0]->value[3];
+			debug("detected single-field device");
+		} else if (report->maxfield >= 4 && report->field[0]->maxusage == 1 &&
+				report->field[0]->usage[0].hid == (HID_UP_LED | 0x43)) {
+			report->field[0]->value[0] = 0x00;
+			report->field[1]->value[0] = 0x00;
+			strong = &report->field[2]->value[0];
+			weak = &report->field[3]->value[0];
+			debug("detected 4-field device");
+		} else {
+			dev_err(&hid->dev, "not enough fields or values\n");
 			return -ENODEV;
 		}
 
@@ -130,10 +155,11 @@ static int plff_init(struct hid_device *hid)
 		}
 
 		plff->report = report;
-		plff->report->field[0]->value[0] = 0x00;
-		plff->report->field[0]->value[1] = 0x00;
-		plff->report->field[0]->value[2] = 0x00;
-		plff->report->field[0]->value[3] = 0x00;
+		plff->strong = strong;
+		plff->weak = weak;
+
+		*strong = 0x00;
+		*weak = 0x00;
 		usbhid_submit_report(hid, plff->report, USB_DIR_OUT);
 	}
 
@@ -180,7 +206,7 @@ static const struct hid_device_id pl_devices[] = {
 		.driver_data = 1 }, /* Twin USB Joystick */
 	{ HID_USB_DEVICE(USB_VENDOR_ID_GAMERON, USB_DEVICE_ID_GAMERON_DUAL_PCS_ADAPTOR),
 		.driver_data = 1 }, /* Twin USB Joystick */
-	{ HID_USB_DEVICE(USB_VENDOR_ID_GREENASIA, 0x0003), }, /* GreenAsia Inc. USB Joystick */
+	{ HID_USB_DEVICE(USB_VENDOR_ID_GREENASIA, 0x0003), },
 	{ }
 };
 MODULE_DEVICE_TABLE(hid, pl_devices);
@@ -204,5 +230,3 @@ static void pl_exit(void)
 module_init(pl_init);
 module_exit(pl_exit);
 MODULE_LICENSE("GPL");
-
-HID_COMPAT_LOAD_DRIVER(pantherlord);

drivers/hid/hid-samsung.c

@@ -96,5 +96,3 @@ static void samsung_exit(void)
 module_init(samsung_init);
 module_exit(samsung_exit);
 MODULE_LICENSE("GPL");
-
-HID_COMPAT_LOAD_DRIVER(samsung);

drivers/hid/hid-sony.c

@@ -148,5 +148,3 @@ static void sony_exit(void)
 module_init(sony_init);
 module_exit(sony_exit);
 MODULE_LICENSE("GPL");
-
-HID_COMPAT_LOAD_DRIVER(sony);

drivers/hid/hid-sunplus.c

@@ -78,5 +78,3 @@ static void sp_exit(void)
 module_init(sp_init);
 module_exit(sp_exit);
 MODULE_LICENSE("GPL");
-
-HID_COMPAT_LOAD_DRIVER(sunplus);

drivers/hid/hid-tmff.c

@@ -265,5 +265,3 @@ static void tm_exit(void)
 module_init(tm_init);
 module_exit(tm_exit);
 MODULE_LICENSE("GPL");
-
-HID_COMPAT_LOAD_DRIVER(thrustmaster);

drivers/hid/hid-topseed.c

@@ -73,5 +73,3 @@ static void ts_exit(void)
 module_init(ts_init);
 module_exit(ts_exit);
 MODULE_LICENSE("GPL");
-
-HID_COMPAT_LOAD_DRIVER(topseed);

drivers/hid/hid-zpff.c

@@ -158,5 +158,3 @@ static void zp_exit(void)
 module_init(zp_init);
 module_exit(zp_exit);
 MODULE_LICENSE("GPL");
-
-HID_COMPAT_LOAD_DRIVER(zeroplus);

drivers/hid/hidraw.c

@@ -181,9 +181,17 @@ static int hidraw_open(struct inode *inode, struct file *file)
 
 	dev = hidraw_table[minor];
 	if (!dev->open++) {
+		if (dev->hid->ll_driver->power) {
+			err = dev->hid->ll_driver->power(dev->hid, PM_HINT_FULLON);
+			if (err < 0)
+				goto out_unlock;
+		}
 		err = dev->hid->ll_driver->open(dev->hid);
-		if (err < 0)
+		if (err < 0) {
+			if (dev->hid->ll_driver->power)
+				dev->hid->ll_driver->power(dev->hid, PM_HINT_NORMAL);
 			dev->open--;
+		}
 	}
 
 out_unlock:
@@ -209,10 +217,13 @@ static int hidraw_release(struct inode * inode, struct file * file)
 	list_del(&list->node);
 	dev = hidraw_table[minor];
 	if (!--dev->open) {
-		if (list->hidraw->exist)
+		if (list->hidraw->exist) {
+			if (dev->hid->ll_driver->power)
+				dev->hid->ll_driver->power(dev->hid, PM_HINT_NORMAL);
 			dev->hid->ll_driver->close(dev->hid);
-		else
+		} else {
 			kfree(list->hidraw);
+		}
 	}
 
 	kfree(list);

drivers/hid/usbhid/hid-core.c

@@ -5,6 +5,7 @@
  *  Copyright (c) 2000-2005 Vojtech Pavlik <vojtech@suse.cz>
  *  Copyright (c) 2005 Michael Haboustak <mike-@cinci.rr.com> for Concept2, Inc
  *  Copyright (c) 2006-2008 Jiri Kosina
+ *  Copyright (c) 2007-2008 Oliver Neukum
  */
 
 /*
@@ -27,6 +28,7 @@
 #include <asm/byteorder.h>
 #include <linux/input.h>
 #include <linux/wait.h>
+#include <linux/workqueue.h>
 
 #include <linux/usb.h>
 
@@ -53,6 +55,10 @@ static unsigned int hid_mousepoll_interval;
 module_param_named(mousepoll, hid_mousepoll_interval, uint, 0644);
 MODULE_PARM_DESC(mousepoll, "Polling interval of mice");
 
+static unsigned int ignoreled;
+module_param_named(ignoreled, ignoreled, uint, 0644);
+MODULE_PARM_DESC(ignoreled, "Autosuspend with active leds");
+
 /* Quirks specified at module load time */
 static char *quirks_param[MAX_USBHID_BOOT_QUIRKS] = { [ 0 ... (MAX_USBHID_BOOT_QUIRKS - 1) ] = NULL };
 module_param_array_named(quirks, quirks_param, charp, NULL, 0444);
@@ -63,8 +69,13 @@ MODULE_PARM_DESC(quirks, "Add/modify USB HID quirks by specifying "
 /*
  * Input submission and I/O error handler.
  */
+static DEFINE_MUTEX(hid_open_mut);
+static struct workqueue_struct *resumption_waker;
 
 static void hid_io_error(struct hid_device *hid);
+static int hid_submit_out(struct hid_device *hid);
+static int hid_submit_ctrl(struct hid_device *hid);
+static void hid_cancel_delayed_stuff(struct usbhid_device *usbhid);
 
 /* Start up the input URB */
 static int hid_start_in(struct hid_device *hid)
@@ -73,15 +84,16 @@ static int hid_start_in(struct hid_device *hid)
 	int rc = 0;
 	struct usbhid_device *usbhid = hid->driver_data;
 
-	spin_lock_irqsave(&usbhid->inlock, flags);
-	if (hid->open > 0 && !test_bit(HID_SUSPENDED, &usbhid->iofl) &&
+	spin_lock_irqsave(&usbhid->lock, flags);
+	if (hid->open > 0 &&
 			!test_bit(HID_DISCONNECTED, &usbhid->iofl) &&
+			!test_bit(HID_REPORTED_IDLE, &usbhid->iofl) &&
 			!test_and_set_bit(HID_IN_RUNNING, &usbhid->iofl)) {
 		rc = usb_submit_urb(usbhid->urbin, GFP_ATOMIC);
 		if (rc != 0)
 			clear_bit(HID_IN_RUNNING, &usbhid->iofl);
 	}
-	spin_unlock_irqrestore(&usbhid->inlock, flags);
+	spin_unlock_irqrestore(&usbhid->lock, flags);
 	return rc;
 }
 
@@ -145,7 +157,7 @@ static void hid_io_error(struct hid_device *hid)
 	unsigned long flags;
 	struct usbhid_device *usbhid = hid->driver_data;
 
-	spin_lock_irqsave(&usbhid->inlock, flags);
+	spin_lock_irqsave(&usbhid->lock, flags);
 
 	/* Stop when disconnected */
 	if (test_bit(HID_DISCONNECTED, &usbhid->iofl))
@@ -175,7 +187,51 @@ static void hid_io_error(struct hid_device *hid)
 	mod_timer(&usbhid->io_retry,
 			jiffies + msecs_to_jiffies(usbhid->retry_delay));
 done:
-	spin_unlock_irqrestore(&usbhid->inlock, flags);
+	spin_unlock_irqrestore(&usbhid->lock, flags);
+}
+
+static void usbhid_mark_busy(struct usbhid_device *usbhid)
+{
+	struct usb_interface *intf = usbhid->intf;
+
+	usb_mark_last_busy(interface_to_usbdev(intf));
+}
+
+static int usbhid_restart_out_queue(struct usbhid_device *usbhid)
+{
+	struct hid_device *hid = usb_get_intfdata(usbhid->intf);
+	int kicked;
+
+	if (!hid)
+		return 0;
+
+	if ((kicked = (usbhid->outhead != usbhid->outtail))) {
+		dbg("Kicking head %d tail %d", usbhid->outhead, usbhid->outtail);
+		if (hid_submit_out(hid)) {
+			clear_bit(HID_OUT_RUNNING, &usbhid->iofl);
+			wake_up(&usbhid->wait);
+		}
+	}
+	return kicked;
+}
+
+static int usbhid_restart_ctrl_queue(struct usbhid_device *usbhid)
+{
+	struct hid_device *hid = usb_get_intfdata(usbhid->intf);
+	int kicked;
+
+	WARN_ON(hid == NULL);
+	if (!hid)
+		return 0;
+
+	if ((kicked = (usbhid->ctrlhead != usbhid->ctrltail))) {
+		dbg("Kicking head %d tail %d", usbhid->ctrlhead, usbhid->ctrltail);
+		if (hid_submit_ctrl(hid)) {
+			clear_bit(HID_CTRL_RUNNING, &usbhid->iofl);
+			wake_up(&usbhid->wait);
+		}
+	}
+	return kicked;
 }
 
 /*
@@ -190,12 +246,23 @@ static void hid_irq_in(struct urb *urb)
 
 	switch (urb->status) {
 	case 0:			/* success */
+		usbhid_mark_busy(usbhid);
 		usbhid->retry_delay = 0;
 		hid_input_report(urb->context, HID_INPUT_REPORT,
 				 urb->transfer_buffer,
 				 urb->actual_length, 1);
+		/*
+		 * autosuspend refused while keys are pressed
+		 * because most keyboards don't wake up when
+		 * a key is released
+		 */
+		if (hid_check_keys_pressed(hid))
+			set_bit(HID_KEYS_PRESSED, &usbhid->iofl);
+		else
+			clear_bit(HID_KEYS_PRESSED, &usbhid->iofl);
 		break;
 	case -EPIPE:		/* stall */
+		usbhid_mark_busy(usbhid);
 		clear_bit(HID_IN_RUNNING, &usbhid->iofl);
 		set_bit(HID_CLEAR_HALT, &usbhid->iofl);
 		schedule_work(&usbhid->reset_work);
@@ -209,6 +276,7 @@ static void hid_irq_in(struct urb *urb)
 	case -EPROTO:		/* protocol error or unplug */
 	case -ETIME:		/* protocol error or unplug */
 	case -ETIMEDOUT:	/* Should never happen, but... */
+		usbhid_mark_busy(usbhid);
 		clear_bit(HID_IN_RUNNING, &usbhid->iofl);
 		hid_io_error(hid);
 		return;
@@ -239,16 +307,25 @@ static int hid_submit_out(struct hid_device *hid)
 	report = usbhid->out[usbhid->outtail].report;
 	raw_report = usbhid->out[usbhid->outtail].raw_report;
 
-	usbhid->urbout->transfer_buffer_length = ((report->size - 1) >> 3) + 1 + (report->id > 0);
-	usbhid->urbout->dev = hid_to_usb_dev(hid);
-	memcpy(usbhid->outbuf, raw_report, usbhid->urbout->transfer_buffer_length);
-	kfree(raw_report);
+	if (!test_bit(HID_REPORTED_IDLE, &usbhid->iofl)) {
+		usbhid->urbout->transfer_buffer_length = ((report->size - 1) >> 3) + 1 + (report->id > 0);
+		usbhid->urbout->dev = hid_to_usb_dev(hid);
+		memcpy(usbhid->outbuf, raw_report, usbhid->urbout->transfer_buffer_length);
+		kfree(raw_report);
 
-	dbg_hid("submitting out urb\n");
+		dbg_hid("submitting out urb\n");
 
-	if (usb_submit_urb(usbhid->urbout, GFP_ATOMIC)) {
-		err_hid("usb_submit_urb(out) failed");
-		return -1;
+		if (usb_submit_urb(usbhid->urbout, GFP_ATOMIC)) {
+			err_hid("usb_submit_urb(out) failed");
+			return -1;
+		}
+	} else {
+		/*
+		 * queue work to wake up the device.
+		 * as the work queue is freezeable, this is safe
+		 * with respect to STD and STR
+		 */
+		queue_work(resumption_waker, &usbhid->restart_work);
 	}
 
 	return 0;
@@ -266,41 +343,50 @@ static int hid_submit_ctrl(struct hid_device *hid)
 	raw_report = usbhid->ctrl[usbhid->ctrltail].raw_report;
 	dir = usbhid->ctrl[usbhid->ctrltail].dir;
 
-	len = ((report->size - 1) >> 3) + 1 + (report->id > 0);
-	if (dir == USB_DIR_OUT) {
-		usbhid->urbctrl->pipe = usb_sndctrlpipe(hid_to_usb_dev(hid), 0);
-		usbhid->urbctrl->transfer_buffer_length = len;
-		memcpy(usbhid->ctrlbuf, raw_report, len);
-		kfree(raw_report);
-	} else {
-		int maxpacket, padlen;
-
-		usbhid->urbctrl->pipe = usb_rcvctrlpipe(hid_to_usb_dev(hid), 0);
-		maxpacket = usb_maxpacket(hid_to_usb_dev(hid), usbhid->urbctrl->pipe, 0);
-		if (maxpacket > 0) {
-			padlen = DIV_ROUND_UP(len, maxpacket);
-			padlen *= maxpacket;
-			if (padlen > usbhid->bufsize)
-				padlen = usbhid->bufsize;
-		} else
-			padlen = 0;
-		usbhid->urbctrl->transfer_buffer_length = padlen;
-	}
-	usbhid->urbctrl->dev = hid_to_usb_dev(hid);
+	if (!test_bit(HID_REPORTED_IDLE, &usbhid->iofl)) {
+		len = ((report->size - 1) >> 3) + 1 + (report->id > 0);
+		if (dir == USB_DIR_OUT) {
+			usbhid->urbctrl->pipe = usb_sndctrlpipe(hid_to_usb_dev(hid), 0);
+			usbhid->urbctrl->transfer_buffer_length = len;
+			memcpy(usbhid->ctrlbuf, raw_report, len);
+			kfree(raw_report);
+		} else {
+			int maxpacket, padlen;
+
+			usbhid->urbctrl->pipe = usb_rcvctrlpipe(hid_to_usb_dev(hid), 0);
+			maxpacket = usb_maxpacket(hid_to_usb_dev(hid), usbhid->urbctrl->pipe, 0);
+			if (maxpacket > 0) {
+				padlen = DIV_ROUND_UP(len, maxpacket);
+				padlen *= maxpacket;
+				if (padlen > usbhid->bufsize)
+					padlen = usbhid->bufsize;
+			} else
+				padlen = 0;
+			usbhid->urbctrl->transfer_buffer_length = padlen;
+		}
+		usbhid->urbctrl->dev = hid_to_usb_dev(hid);
 
-	usbhid->cr->bRequestType = USB_TYPE_CLASS | USB_RECIP_INTERFACE | dir;
-	usbhid->cr->bRequest = (dir == USB_DIR_OUT) ? HID_REQ_SET_REPORT : HID_REQ_GET_REPORT;
-	usbhid->cr->wValue = cpu_to_le16(((report->type + 1) << 8) | report->id);
-	usbhid->cr->wIndex = cpu_to_le16(usbhid->ifnum);
-	usbhid->cr->wLength = cpu_to_le16(len);
+		usbhid->cr->bRequestType = USB_TYPE_CLASS | USB_RECIP_INTERFACE | dir;
+		usbhid->cr->bRequest = (dir == USB_DIR_OUT) ? HID_REQ_SET_REPORT : HID_REQ_GET_REPORT;
+		usbhid->cr->wValue = cpu_to_le16(((report->type + 1) << 8) | report->id);
+		usbhid->cr->wIndex = cpu_to_le16(usbhid->ifnum);
+		usbhid->cr->wLength = cpu_to_le16(len);
 
-	dbg_hid("submitting ctrl urb: %s wValue=0x%04x wIndex=0x%04x wLength=%u\n",
-		usbhid->cr->bRequest == HID_REQ_SET_REPORT ? "Set_Report" : "Get_Report",
-		usbhid->cr->wValue, usbhid->cr->wIndex, usbhid->cr->wLength);
+		dbg_hid("submitting ctrl urb: %s wValue=0x%04x wIndex=0x%04x wLength=%u\n",
+			usbhid->cr->bRequest == HID_REQ_SET_REPORT ? "Set_Report" : "Get_Report",
+			usbhid->cr->wValue, usbhid->cr->wIndex, usbhid->cr->wLength);
 
-	if (usb_submit_urb(usbhid->urbctrl, GFP_ATOMIC)) {
-		err_hid("usb_submit_urb(ctrl) failed");
-		return -1;
+		if (usb_submit_urb(usbhid->urbctrl, GFP_ATOMIC)) {
+			err_hid("usb_submit_urb(ctrl) failed");
+			return -1;
+		}
+	} else {
+		/*
+		 * queue work to wake up the device.
+		 * as the work queue is freezeable, this is safe
+		 * with respect to STD and STR
+		 */
+		queue_work(resumption_waker, &usbhid->restart_work);
 	}
 
 	return 0;
@@ -332,7 +418,7 @@ static void hid_irq_out(struct urb *urb)
 				"received\n", urb->status);
 	}
 
-	spin_lock_irqsave(&usbhid->outlock, flags);
+	spin_lock_irqsave(&usbhid->lock, flags);
 
 	if (unplug)
 		usbhid->outtail = usbhid->outhead;
@@ -344,12 +430,12 @@ static void hid_irq_out(struct urb *urb)
 			clear_bit(HID_OUT_RUNNING, &usbhid->iofl);
 			wake_up(&usbhid->wait);
 		}
-		spin_unlock_irqrestore(&usbhid->outlock, flags);
+		spin_unlock_irqrestore(&usbhid->lock, flags);
 		return;
 	}
 
 	clear_bit(HID_OUT_RUNNING, &usbhid->iofl);
-	spin_unlock_irqrestore(&usbhid->outlock, flags);
+	spin_unlock_irqrestore(&usbhid->lock, flags);
 	wake_up(&usbhid->wait);
 }
 
@@ -361,12 +447,11 @@ static void hid_ctrl(struct urb *urb)
 {
 	struct hid_device *hid = urb->context;
 	struct usbhid_device *usbhid = hid->driver_data;
-	unsigned long flags;
-	int unplug = 0;
+	int unplug = 0, status = urb->status;
 
-	spin_lock_irqsave(&usbhid->ctrllock, flags);
+	spin_lock(&usbhid->lock);
 
-	switch (urb->status) {
+	switch (status) {
 	case 0:			/* success */
 		if (usbhid->ctrl[usbhid->ctrltail].dir == USB_DIR_IN)
 			hid_input_report(urb->context,
@@ -383,7 +468,7 @@ static void hid_ctrl(struct urb *urb)
 		break;
 	default:		/* error */
 		dev_warn(&urb->dev->dev, "ctrl urb status %d "
-				"received\n", urb->status);
+				"received\n", status);
 	}
 
 	if (unplug)
@@ -396,19 +481,18 @@ static void hid_ctrl(struct urb *urb)
 			clear_bit(HID_CTRL_RUNNING, &usbhid->iofl);
 			wake_up(&usbhid->wait);
 		}
-		spin_unlock_irqrestore(&usbhid->ctrllock, flags);
+		spin_unlock(&usbhid->lock);
 		return;
 	}
 
 	clear_bit(HID_CTRL_RUNNING, &usbhid->iofl);
-	spin_unlock_irqrestore(&usbhid->ctrllock, flags);
+	spin_unlock(&usbhid->lock);
 	wake_up(&usbhid->wait);
 }
 
-void usbhid_submit_report(struct hid_device *hid, struct hid_report *report, unsigned char dir)
+void __usbhid_submit_report(struct hid_device *hid, struct hid_report *report, unsigned char dir)
 {
 	int head;
-	unsigned long flags;
 	struct usbhid_device *usbhid = hid->driver_data;
 	int len = ((report->size - 1) >> 3) + 1 + (report->id > 0);
 
@@ -416,18 +500,13 @@ void usbhid_submit_report(struct hid_device *hid, struct hid_report *report, uns
 		return;
 
 	if (usbhid->urbout && dir == USB_DIR_OUT && report->type == HID_OUTPUT_REPORT) {
-
-		spin_lock_irqsave(&usbhid->outlock, flags);
-
 		if ((head = (usbhid->outhead + 1) & (HID_OUTPUT_FIFO_SIZE - 1)) == usbhid->outtail) {
-			spin_unlock_irqrestore(&usbhid->outlock, flags);
 			dev_warn(&hid->dev, "output queue full\n");
 			return;
 		}
 
 		usbhid->out[usbhid->outhead].raw_report = kmalloc(len, GFP_ATOMIC);
 		if (!usbhid->out[usbhid->outhead].raw_report) {
-			spin_unlock_irqrestore(&usbhid->outlock, flags);
 			dev_warn(&hid->dev, "output queueing failed\n");
 			return;
 		}
@@ -438,15 +517,10 @@ void usbhid_submit_report(struct hid_device *hid, struct hid_report *report, uns
 		if (!test_and_set_bit(HID_OUT_RUNNING, &usbhid->iofl))
 			if (hid_submit_out(hid))
 				clear_bit(HID_OUT_RUNNING, &usbhid->iofl);
-
-		spin_unlock_irqrestore(&usbhid->outlock, flags);
 		return;
 	}
 
-	spin_lock_irqsave(&usbhid->ctrllock, flags);
-
 	if ((head = (usbhid->ctrlhead + 1) & (HID_CONTROL_FIFO_SIZE - 1)) == usbhid->ctrltail) {
-		spin_unlock_irqrestore(&usbhid->ctrllock, flags);
 		dev_warn(&hid->dev, "control queue full\n");
 		return;
 	}
@@ -454,7 +528,6 @@ void usbhid_submit_report(struct hid_device *hid, struct hid_report *report, uns
 	if (dir == USB_DIR_OUT) {
 		usbhid->ctrl[usbhid->ctrlhead].raw_report = kmalloc(len, GFP_ATOMIC);
 		if (!usbhid->ctrl[usbhid->ctrlhead].raw_report) {
-			spin_unlock_irqrestore(&usbhid->ctrllock, flags);
 			dev_warn(&hid->dev, "control queueing failed\n");
 			return;
 		}
@@ -467,15 +540,25 @@ void usbhid_submit_report(struct hid_device *hid, struct hid_report *report, uns
 	if (!test_and_set_bit(HID_CTRL_RUNNING, &usbhid->iofl))
 		if (hid_submit_ctrl(hid))
 			clear_bit(HID_CTRL_RUNNING, &usbhid->iofl);
+}
+
+void usbhid_submit_report(struct hid_device *hid, struct hid_report *report, unsigned char dir)
+{
+	struct usbhid_device *usbhid = hid->driver_data;
+	unsigned long flags;
 
-	spin_unlock_irqrestore(&usbhid->ctrllock, flags);
+	spin_lock_irqsave(&usbhid->lock, flags);
+	__usbhid_submit_report(hid, report, dir);
+	spin_unlock_irqrestore(&usbhid->lock, flags);
 }
 EXPORT_SYMBOL_GPL(usbhid_submit_report);
 
 static int usb_hidinput_input_event(struct input_dev *dev, unsigned int type, unsigned int code, int value)
 {
 	struct hid_device *hid = input_get_drvdata(dev);
+	struct usbhid_device *usbhid = hid->driver_data;
 	struct hid_field *field;
+	unsigned long flags;
 	int offset;
 
 	if (type == EV_FF)
@@ -490,6 +573,15 @@ static int usb_hidinput_input_event(struct input_dev *dev, unsigned int type, un
 	}
 
 	hid_set_field(field, offset, value);
+	if (value) {
+		spin_lock_irqsave(&usbhid->lock, flags);
+		usbhid->ledcount++;
+		spin_unlock_irqrestore(&usbhid->lock, flags);
+	} else {
+		spin_lock_irqsave(&usbhid->lock, flags);
+		usbhid->ledcount--;
+		spin_unlock_irqrestore(&usbhid->lock, flags);
+	}
 	usbhid_submit_report(hid, field->report, USB_DIR_OUT);
 
 	return 0;
@@ -538,15 +630,22 @@ int usbhid_open(struct hid_device *hid)
 	struct usbhid_device *usbhid = hid->driver_data;
 	int res;
 
+	mutex_lock(&hid_open_mut);
 	if (!hid->open++) {
 		res = usb_autopm_get_interface(usbhid->intf);
+		/* the device must be awake to reliable request remote wakeup */
 		if (res < 0) {
 			hid->open--;
+			mutex_unlock(&hid_open_mut);
 			return -EIO;
 		}
+		usbhid->intf->needs_remote_wakeup = 1;
+		if (hid_start_in(hid))
+			hid_io_error(hid);
+ 
+		usb_autopm_put_interface(usbhid->intf);
 	}
-	if (hid_start_in(hid))
-		hid_io_error(hid);
+	mutex_unlock(&hid_open_mut);
 	return 0;
 }
 
@@ -554,10 +653,22 @@ void usbhid_close(struct hid_device *hid)
 {
 	struct usbhid_device *usbhid = hid->driver_data;
 
+	mutex_lock(&hid_open_mut);
+
+	/* protecting hid->open to make sure we don't restart
+	 * data acquistion due to a resumption we no longer
+	 * care about
+	 */
+	spin_lock_irq(&usbhid->lock);
 	if (!--hid->open) {
+		spin_unlock_irq(&usbhid->lock);
 		usb_kill_urb(usbhid->urbin);
-		usb_autopm_put_interface(usbhid->intf);
+		flush_scheduled_work();
+		usbhid->intf->needs_remote_wakeup = 0;
+	} else {
+		spin_unlock_irq(&usbhid->lock);
 	}
+	mutex_unlock(&hid_open_mut);
 }
 
 /*
@@ -687,6 +798,25 @@ static int usbhid_output_raw_report(struct hid_device *hid, __u8 *buf, size_t co
 	return ret;
 }
 
+static void usbhid_restart_queues(struct usbhid_device *usbhid)
+{
+	if (usbhid->urbout)
+		usbhid_restart_out_queue(usbhid);
+	usbhid_restart_ctrl_queue(usbhid);
+}
+
+static void __usbhid_restart_queues(struct work_struct *work)
+{
+	struct usbhid_device *usbhid =
+		container_of(work, struct usbhid_device, restart_work);
+	int r;
+
+	r = usb_autopm_get_interface(usbhid->intf);
+	if (r < 0)
+		return;
+	usb_autopm_put_interface(usbhid->intf);
+}
+
 static void hid_free_buffers(struct usb_device *dev, struct hid_device *hid)
 {
 	struct usbhid_device *usbhid = hid->driver_data;
@@ -711,6 +841,9 @@ static int usbhid_parse(struct hid_device *hid)
 	quirks = usbhid_lookup_quirk(le16_to_cpu(dev->descriptor.idVendor),
 			le16_to_cpu(dev->descriptor.idProduct));
 
+	if (quirks & HID_QUIRK_IGNORE)
+		return -ENODEV;
+
 	/* Many keyboards and mice don't like to be polled for reports,
 	 * so we will always set the HID_QUIRK_NOGET flag for them. */
 	if (interface->desc.bInterfaceSubClass == USB_INTERFACE_SUBCLASS_BOOT) {
@@ -850,11 +983,11 @@ static int usbhid_start(struct hid_device *hid)
 
 	init_waitqueue_head(&usbhid->wait);
 	INIT_WORK(&usbhid->reset_work, hid_reset);
+	INIT_WORK(&usbhid->restart_work, __usbhid_restart_queues);
 	setup_timer(&usbhid->io_retry, hid_retry_timeout, (unsigned long) hid);
 
-	spin_lock_init(&usbhid->inlock);
-	spin_lock_init(&usbhid->outlock);
-	spin_lock_init(&usbhid->ctrllock);
+	spin_lock_init(&usbhid->lock);
+	spin_lock_init(&usbhid->lock);
 
 	usbhid->intf = intf;
 	usbhid->ifnum = interface->desc.bInterfaceNumber;
@@ -906,15 +1039,14 @@ static void usbhid_stop(struct hid_device *hid)
 		return;
 
 	clear_bit(HID_STARTED, &usbhid->iofl);
-	spin_lock_irq(&usbhid->inlock);	/* Sync with error handler */
+	spin_lock_irq(&usbhid->lock);	/* Sync with error handler */
 	set_bit(HID_DISCONNECTED, &usbhid->iofl);
-	spin_unlock_irq(&usbhid->inlock);
+	spin_unlock_irq(&usbhid->lock);
 	usb_kill_urb(usbhid->urbin);
 	usb_kill_urb(usbhid->urbout);
 	usb_kill_urb(usbhid->urbctrl);
 
-	del_timer_sync(&usbhid->io_retry);
-	cancel_work_sync(&usbhid->reset_work);
+	hid_cancel_delayed_stuff(usbhid);
 
 	if (hid->claimed & HID_CLAIMED_INPUT)
 		hidinput_disconnect(hid);
@@ -935,12 +1067,28 @@ static void usbhid_stop(struct hid_device *hid)
 	hid_free_buffers(hid_to_usb_dev(hid), hid);
 }
 
+static int usbhid_power(struct hid_device *hid, int lvl)
+{
+	int r = 0;
+
+	switch (lvl) {
+	case PM_HINT_FULLON:
+		r = usbhid_get_power(hid);
+		break;
+	case PM_HINT_NORMAL:
+		usbhid_put_power(hid);
+		break;
+	}
+	return r;
+}
+
 static struct hid_ll_driver usb_hid_driver = {
 	.parse = usbhid_parse,
 	.start = usbhid_start,
 	.stop = usbhid_stop,
 	.open = usbhid_open,
 	.close = usbhid_close,
+	.power = usbhid_power,
 	.hidinput_input_event = usb_hidinput_input_event,
 };
 
@@ -1049,19 +1197,126 @@ static void hid_disconnect(struct usb_interface *intf)
 	kfree(usbhid);
 }
 
+static void hid_cancel_delayed_stuff(struct usbhid_device *usbhid)
+{
+	del_timer_sync(&usbhid->io_retry);
+	cancel_work_sync(&usbhid->restart_work);
+	cancel_work_sync(&usbhid->reset_work);
+}
+
+static void hid_cease_io(struct usbhid_device *usbhid)
+{
+	del_timer(&usbhid->io_retry);
+	usb_kill_urb(usbhid->urbin);
+	usb_kill_urb(usbhid->urbctrl);
+	usb_kill_urb(usbhid->urbout);
+}
+
+/* Treat USB reset pretty much the same as suspend/resume */
+static int hid_pre_reset(struct usb_interface *intf)
+{
+	struct hid_device *hid = usb_get_intfdata(intf);
+	struct usbhid_device *usbhid = hid->driver_data;
+
+	spin_lock_irq(&usbhid->lock);
+	set_bit(HID_RESET_PENDING, &usbhid->iofl);
+	spin_unlock_irq(&usbhid->lock);
+	cancel_work_sync(&usbhid->restart_work);
+	hid_cease_io(usbhid);
+
+	return 0;
+}
+
+/* Same routine used for post_reset and reset_resume */
+static int hid_post_reset(struct usb_interface *intf)
+{
+	struct usb_device *dev = interface_to_usbdev (intf);
+	struct hid_device *hid = usb_get_intfdata(intf);
+	struct usbhid_device *usbhid = hid->driver_data;
+	int status;
+ 
+	spin_lock_irq(&usbhid->lock);
+	clear_bit(HID_RESET_PENDING, &usbhid->iofl);
+	spin_unlock_irq(&usbhid->lock);
+	hid_set_idle(dev, intf->cur_altsetting->desc.bInterfaceNumber, 0, 0);
+	/* FIXME: Any more reinitialization needed? */
+	status = hid_start_in(hid);
+	if (status < 0)
+		hid_io_error(hid);
+	usbhid_restart_queues(usbhid);
+
+	return 0;
+}
+
+int usbhid_get_power(struct hid_device *hid)
+{
+	struct usbhid_device *usbhid = hid->driver_data;
+ 
+	return usb_autopm_get_interface(usbhid->intf);
+}
+
+void usbhid_put_power(struct hid_device *hid)
+{
+	struct usbhid_device *usbhid = hid->driver_data;
+ 
+	usb_autopm_put_interface(usbhid->intf);
+}
+
+
+#ifdef CONFIG_PM
 static int hid_suspend(struct usb_interface *intf, pm_message_t message)
 {
-	struct hid_device *hid = usb_get_intfdata (intf);
+	struct hid_device *hid = usb_get_intfdata(intf);
 	struct usbhid_device *usbhid = hid->driver_data;
+	struct usb_device *udev = interface_to_usbdev(intf);
+	int status;
 
-	if (!test_bit(HID_STARTED, &usbhid->iofl))
-		return 0;
+	if (udev->auto_pm) {
+		spin_lock_irq(&usbhid->lock);	/* Sync with error handler */
+		if (!test_bit(HID_RESET_PENDING, &usbhid->iofl)
+		    && !test_bit(HID_CLEAR_HALT, &usbhid->iofl)
+		    && !test_bit(HID_OUT_RUNNING, &usbhid->iofl)
+		    && !test_bit(HID_CTRL_RUNNING, &usbhid->iofl)
+		    && !test_bit(HID_KEYS_PRESSED, &usbhid->iofl)
+		    && (!usbhid->ledcount || ignoreled))
+		{
+			set_bit(HID_REPORTED_IDLE, &usbhid->iofl);
+			spin_unlock_irq(&usbhid->lock);
+		} else {
+			usbhid_mark_busy(usbhid);
+			spin_unlock_irq(&usbhid->lock);
+			return -EBUSY;
+		}
 
-	spin_lock_irq(&usbhid->inlock);	/* Sync with error handler */
-	set_bit(HID_SUSPENDED, &usbhid->iofl);
-	spin_unlock_irq(&usbhid->inlock);
-	del_timer_sync(&usbhid->io_retry);
-	usb_kill_urb(usbhid->urbin);
+	} else {
+		spin_lock_irq(&usbhid->lock);
+		set_bit(HID_REPORTED_IDLE, &usbhid->iofl);
+		spin_unlock_irq(&usbhid->lock);
+		if (usbhid_wait_io(hid) < 0)
+			return -EIO;
+	}
+
+	if (!ignoreled && udev->auto_pm) {
+		spin_lock_irq(&usbhid->lock);
+		if (test_bit(HID_LED_ON, &usbhid->iofl)) {
+			spin_unlock_irq(&usbhid->lock);
+			usbhid_mark_busy(usbhid);
+			return -EBUSY;
+		}
+		spin_unlock_irq(&usbhid->lock);
+	}
+
+	hid_cancel_delayed_stuff(usbhid);
+	hid_cease_io(usbhid);
+
+	if (udev->auto_pm && test_bit(HID_KEYS_PRESSED, &usbhid->iofl)) {
+		/* lost race against keypresses */
+		status = hid_start_in(hid);
+		if (status < 0)
+			hid_io_error(hid);
+		usbhid_mark_busy(usbhid);
+		return -EBUSY;
+	}
 	dev_dbg(&intf->dev, "suspend\n");
 	return 0;
 }
@@ -1075,32 +1330,33 @@ static int hid_resume(struct usb_interface *intf)
 	if (!test_bit(HID_STARTED, &usbhid->iofl))
 		return 0;
 
-	clear_bit(HID_SUSPENDED, &usbhid->iofl);
+	clear_bit(HID_REPORTED_IDLE, &usbhid->iofl);
+	usbhid_mark_busy(usbhid);
+
+	if (test_bit(HID_CLEAR_HALT, &usbhid->iofl) ||
+	    test_bit(HID_RESET_PENDING, &usbhid->iofl))
+		schedule_work(&usbhid->reset_work);
 	usbhid->retry_delay = 0;
 	status = hid_start_in(hid);
-	dev_dbg(&intf->dev, "resume status %d\n", status);
-	return status;
-}
+	if (status < 0)
+		hid_io_error(hid);
+	usbhid_restart_queues(usbhid);
 
-/* Treat USB reset pretty much the same as suspend/resume */
-static int hid_pre_reset(struct usb_interface *intf)
-{
-	/* FIXME: What if the interface is already suspended? */
-	hid_suspend(intf, PMSG_ON);
+	dev_dbg(&intf->dev, "resume status %d\n", status);
 	return 0;
 }
 
-/* Same routine used for post_reset and reset_resume */
-static int hid_post_reset(struct usb_interface *intf)
+static int hid_reset_resume(struct usb_interface *intf)
 {
-	struct usb_device *dev = interface_to_usbdev (intf);
-
-	hid_set_idle(dev, intf->cur_altsetting->desc.bInterfaceNumber, 0, 0);
-	/* FIXME: Any more reinitialization needed? */
+	struct hid_device *hid = usb_get_intfdata(intf);
+	struct usbhid_device *usbhid = hid->driver_data;
 
-	return hid_resume(intf);
+	clear_bit(HID_REPORTED_IDLE, &usbhid->iofl);
+	return hid_post_reset(intf);
 }
 
+#endif /* CONFIG_PM */
+
 static struct usb_device_id hid_usb_ids [] = {
 	{ .match_flags = USB_DEVICE_ID_MATCH_INT_CLASS,
 		.bInterfaceClass = USB_INTERFACE_CLASS_HID },
@@ -1113,9 +1369,11 @@ static struct usb_driver hid_driver = {
 	.name =		"usbhid",
 	.probe =	hid_probe,
 	.disconnect =	hid_disconnect,
+#ifdef CONFIG_PM
 	.suspend =	hid_suspend,
 	.resume =	hid_resume,
-	.reset_resume =	hid_post_reset,
+	.reset_resume =	hid_reset_resume,
+#endif
 	.pre_reset =	hid_pre_reset,
 	.post_reset =	hid_post_reset,
 	.id_table =	hid_usb_ids,
@@ -1134,7 +1392,11 @@ static struct hid_driver hid_usb_driver = {
 
 static int __init hid_init(void)
 {
-	int retval;
+	int retval = -ENOMEM;
+
+	resumption_waker = create_freezeable_workqueue("usbhid_resumer");
+	if (!resumption_waker)
+		goto no_queue;
 	retval = hid_register_driver(&hid_usb_driver);
 	if (retval)
 		goto hid_register_fail;
@@ -1158,6 +1420,8 @@ static int __init hid_init(void)
 usbhid_quirks_init_fail:
 	hid_unregister_driver(&hid_usb_driver);
 hid_register_fail:
+	destroy_workqueue(resumption_waker);
+no_queue:
 	return retval;
 }
 
@@ -1167,6 +1431,7 @@ static void __exit hid_exit(void)
 	hiddev_exit();
 	usbhid_quirks_exit();
 	hid_unregister_driver(&hid_usb_driver);
+	destroy_workqueue(resumption_waker);
 }
 
 module_init(hid_init);

drivers/hid/usbhid/hiddev.c

@@ -246,10 +246,12 @@ static int hiddev_release(struct inode * inode, struct file * file)
 	spin_unlock_irqrestore(&list->hiddev->list_lock, flags);
 
 	if (!--list->hiddev->open) {
-		if (list->hiddev->exist)
+		if (list->hiddev->exist) {
 			usbhid_close(list->hiddev->hid);
-		else
+			usbhid_put_power(list->hiddev->hid);
+		} else {
 			kfree(list->hiddev);
+		}
 	}
 
 	kfree(list);
@@ -300,6 +302,17 @@ static int hiddev_open(struct inode *inode, struct file *file)
 	list_add_tail(&list->node, &hiddev_table[i]->list);
 	spin_unlock_irq(&list->hiddev->list_lock);
 
+	if (!list->hiddev->open++)
+		if (list->hiddev->exist) {
+			struct hid_device *hid = hiddev_table[i]->hid;
+			res = usbhid_get_power(hid);
+			if (res < 0) {
+				res = -EIO;
+				goto bail;
+			}
+			usbhid_open(hid);
+		}
+
 	return 0;
 bail:
 	file->private_data = NULL;
@@ -875,16 +888,21 @@ int hiddev_connect(struct hid_device *hid, unsigned int force)
 	hiddev->hid = hid;
 	hiddev->exist = 1;
 
+	/* when lock_kernel() usage is fixed in usb_open(),
+	 * we could also fix it here */
+	lock_kernel();
 	retval = usb_register_dev(usbhid->intf, &hiddev_class);
 	if (retval) {
 		err_hid("Not able to get a minor for this device.");
 		hid->hiddev = NULL;
+		unlock_kernel();
 		kfree(hiddev);
 		return -1;
 	} else {
 		hid->minor = usbhid->intf->minor;
 		hiddev_table[usbhid->intf->minor - HIDDEV_MINOR_BASE] = hiddev;
 	}
+	unlock_kernel();
 
 	return 0;
 }

drivers/hid/usbhid/usbhid.h

@@ -38,7 +38,10 @@ int usbhid_wait_io(struct hid_device* hid);
 void usbhid_close(struct hid_device *hid);
 int usbhid_open(struct hid_device *hid);
 void usbhid_init_reports(struct hid_device *hid);
-void usbhid_submit_report(struct hid_device *hid, struct hid_report *report, unsigned char dir);
+void usbhid_submit_report
+(struct hid_device *hid, struct hid_report *report, unsigned char dir);
+int usbhid_get_power(struct hid_device *hid);
+void usbhid_put_power(struct hid_device *hid);
 
 /* iofl flags */
 #define HID_CTRL_RUNNING	1
@@ -49,6 +52,9 @@ void usbhid_submit_report(struct hid_device *hid, struct hid_report *report, uns
 #define HID_CLEAR_HALT		6
 #define HID_DISCONNECTED	7
 #define HID_STARTED		8
+#define HID_REPORTED_IDLE	9
+#define HID_KEYS_PRESSED	10
+#define HID_LED_ON		11
 
 /*
  * USB-specific HID struct, to be pointed to
@@ -66,7 +72,6 @@ struct usbhid_device {
 	struct urb *urbin;                                              /* Input URB */
 	char *inbuf;                                                    /* Input buffer */
 	dma_addr_t inbuf_dma;                                           /* Input buffer dma */
-	spinlock_t inlock;                                              /* Input fifo spinlock */
 
 	struct urb *urbctrl;                                            /* Control URB */
 	struct usb_ctrlrequest *cr;                                     /* Control request struct */
@@ -75,21 +80,22 @@ struct usbhid_device {
 	unsigned char ctrlhead, ctrltail;                               /* Control fifo head & tail */
 	char *ctrlbuf;                                                  /* Control buffer */
 	dma_addr_t ctrlbuf_dma;                                         /* Control buffer dma */
-	spinlock_t ctrllock;                                            /* Control fifo spinlock */
 
 	struct urb *urbout;                                             /* Output URB */
 	struct hid_output_fifo out[HID_CONTROL_FIFO_SIZE];              /* Output pipe fifo */
 	unsigned char outhead, outtail;                                 /* Output pipe fifo head & tail */
 	char *outbuf;                                                   /* Output buffer */
 	dma_addr_t outbuf_dma;                                          /* Output buffer dma */
-	spinlock_t outlock;                                             /* Output fifo spinlock */
 
+	spinlock_t lock;						/* fifo spinlock */
 	unsigned long iofl;                                             /* I/O flags (CTRL_RUNNING, OUT_RUNNING) */
 	struct timer_list io_retry;                                     /* Retry timer */
 	unsigned long stop_retry;                                       /* Time to give up, in jiffies */
 	unsigned int retry_delay;                                       /* Delay length in ms */
 	struct work_struct reset_work;                                  /* Task context for resets */
+	struct work_struct restart_work;				/* waking up for output to be done in a task */
 	wait_queue_head_t wait;						/* For sleeping */
+	int ledcount;							/* counting the number of active leds */
 };
 
 #define	hid_to_usb_dev(hid_dev) \

include/linux/hid.h

@@ -270,6 +270,7 @@ struct hid_item {
 
 #define HID_QUIRK_INVERT			0x00000001
 #define HID_QUIRK_NOTOUCH			0x00000002
+#define HID_QUIRK_IGNORE			0x00000004
 #define HID_QUIRK_NOGET				0x00000008
 #define HID_QUIRK_BADPAD			0x00000020
 #define HID_QUIRK_MULTI_INPUT			0x00000040
@@ -603,12 +604,17 @@ struct hid_ll_driver {
 	int (*open)(struct hid_device *hdev);
 	void (*close)(struct hid_device *hdev);
 
+	int (*power)(struct hid_device *hdev, int level);
+
 	int (*hidinput_input_event) (struct input_dev *idev, unsigned int type,
 			unsigned int code, int value);
 
 	int (*parse)(struct hid_device *hdev);
 };
 
+#define	PM_HINT_FULLON	1<<5
+#define PM_HINT_NORMAL	1<<1
+
 /* Applications from HID Usage Tables 4/8/99 Version 1.1 */
 /* We ignore a few input applications that are not widely used */
 #define IS_INPUT_APPLICATION(a) (((a >= 0x00010000) && (a <= 0x00010008)) || (a == 0x00010080) || (a == 0x000c0001) || (a == 0x000d0002))
@@ -641,6 +647,7 @@ int hidinput_find_field(struct hid_device *hid, unsigned int type, unsigned int
 void hid_output_report(struct hid_report *report, __u8 *data);
 struct hid_device *hid_allocate_device(void);
 int hid_parse_report(struct hid_device *hid, __u8 *start, unsigned size);
+int hid_check_keys_pressed(struct hid_device *hid);
 int hid_connect(struct hid_device *hid, unsigned int connect_mask);
 
 /**
@@ -791,21 +798,5 @@ dbg_hid(const char *fmt, ...)
 		__FILE__ , ## arg)
 #endif /* HID_FF */
 
-#ifdef __KERNEL__
-#ifdef CONFIG_HID_COMPAT
-#define HID_COMPAT_LOAD_DRIVER(name)	\
-/* prototype to avoid sparse warning */	\
-extern void hid_compat_##name(void);	\
-void hid_compat_##name(void) { }	\
-EXPORT_SYMBOL(hid_compat_##name)
-#else
-#define HID_COMPAT_LOAD_DRIVER(name)
-#endif /* HID_COMPAT */
-#define HID_COMPAT_CALL_DRIVER(name)	do {	\
-	extern void hid_compat_##name(void);	\
-	hid_compat_##name();			\
-} while (0)
-#endif /* __KERNEL__ */
-
 #endif