staging: r8188eu: Cleanup of include/hal_intf.h

This driver only handles RTL8188EU with USB interface, thus several hardware
defines and macros can be removed.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/staging/rtl8188eu/hal/rtl8188e_dm.c

@@ -63,8 +63,6 @@ static void Init_ODM_ComInfo_88E(struct adapter *Adapter)
 
 	ODM_CmnInfoInit(dm_odm, ODM_CMNINFO_PLATFORM, ODM_CE);
 
-	ODM_CmnInfoInit(dm_odm, ODM_CMNINFO_INTERFACE, Adapter->interface_type);/* RTL871X_HCI_TYPE */
-
 	ODM_CmnInfoInit(dm_odm, ODM_CMNINFO_IC_TYPE, ODM_RTL8188E);
 
 	fab_ver = ODM_TSMC;

drivers/staging/rtl8188eu/hal/rtl8188e_mp.c

@@ -652,12 +652,10 @@ void Hal_SetSingleToneTx(struct adapter *pAdapter, u8 bStart)
 		/*  Start Single Tone. */
 		RT_TRACE(_module_mp_, _drv_alert_, ("SetSingleToneTx: test start\n"));
 		/*  <20120326, Kordan> To amplify the power of tone for Xtal calibration. (asked by Edlu) */
-		if (IS_HARDWARE_TYPE_8188E(pAdapter)) {
 		reg58 = PHY_QueryRFReg(pAdapter, RF_PATH_A, LNA_Low_Gain_3, bRFRegOffsetMask);
 		reg58 &= 0xFFFFFFF0;
 		reg58 += 2;
 		PHY_SetRFReg(pAdapter, RF_PATH_A, LNA_Low_Gain_3, bRFRegOffsetMask, reg58);
-		}
 		PHY_SetBBReg(pAdapter, rFPGA0_RFMOD, bCCKEn, 0x0);
 		PHY_SetBBReg(pAdapter, rFPGA0_RFMOD, bOFDMEn, 0x0);
 
@@ -687,11 +685,9 @@ void Hal_SetSingleToneTx(struct adapter *pAdapter, u8 bStart)
 
 		/*  <20120326, Kordan> To amplify the power of tone for Xtal calibration. (asked by Edlu) */
 		/*  <20120326, Kordan> Only in single tone mode. (asked by Edlu) */
-		if (IS_HARDWARE_TYPE_8188E(pAdapter)) {
 		reg58 = PHY_QueryRFReg(pAdapter, RF_PATH_A, LNA_Low_Gain_3, bRFRegOffsetMask);
 		reg58 &= 0xFFFFFFF0;
 		PHY_SetRFReg(pAdapter, RF_PATH_A, LNA_Low_Gain_3, bRFRegOffsetMask, reg58);
-		}
 		write_bbreg(pAdapter, rFPGA0_RFMOD, bCCKEn, 0x1);
 		write_bbreg(pAdapter, rFPGA0_RFMOD, bOFDMEn, 0x1);
 		if (is92C) {

drivers/staging/rtl8188eu/hal/usb_ops_linux.c

@@ -723,6 +723,5 @@ void rtl8188eu_set_intf_ops(struct _io_ops	*pops)
 void rtl8188eu_set_hw_type(struct adapter *adapt)
 {
 	adapt->chip_type = RTL8188E;
-	adapt->HardwareType = HARDWARE_TYPE_RTL8188EU;
 	DBG_88E("CHIP TYPE: RTL8188E\n");
 }

drivers/staging/rtl8188eu/include/drv_types.h

@@ -225,8 +225,6 @@ struct adapter {
 	int	pid[3];/* process id from UI, 0:wps, 1:hostapd, 2:dhcpcd */
 	int	bDongle;/* build-in module or external dongle */
 	u16	chip_type;
-	u16	HardwareType;
-	u16	interface_type;/* USB,SDIO,SPI,PCI */
 
 	struct dvobj_priv *dvobj;
 	struct	mlme_priv mlmepriv;

drivers/staging/rtl8188eu/include/hal_intf.h

@@ -286,39 +286,10 @@ enum rt_eeprom_type {
 #define RF_CHANGE_BY_SW		BIT31
 
 enum hardware_type {
-	HARDWARE_TYPE_RTL8180,
-	HARDWARE_TYPE_RTL8185,
-	HARDWARE_TYPE_RTL8187,
-	HARDWARE_TYPE_RTL8188,
-	HARDWARE_TYPE_RTL8190P,
-	HARDWARE_TYPE_RTL8192E,
-	HARDWARE_TYPE_RTL819xU,
-	HARDWARE_TYPE_RTL8192SE,
-	HARDWARE_TYPE_RTL8192SU,
-	HARDWARE_TYPE_RTL8192CE,
-	HARDWARE_TYPE_RTL8192CU,
-	HARDWARE_TYPE_RTL8192DE,
-	HARDWARE_TYPE_RTL8192DU,
-	HARDWARE_TYPE_RTL8723AE,
-	HARDWARE_TYPE_RTL8723AU,
-	HARDWARE_TYPE_RTL8723AS,
-	HARDWARE_TYPE_RTL8188EE,
 	HARDWARE_TYPE_RTL8188EU,
-	HARDWARE_TYPE_RTL8188ES,
 	HARDWARE_TYPE_MAX,
 };
 
-/*  RTL8188E Series */
-#define IS_HARDWARE_TYPE_8188EE(_Adapter)			\
-(((struct adapter *)_Adapter)->HardwareType == HARDWARE_TYPE_RTL8188EE)
-#define IS_HARDWARE_TYPE_8188EU(_Adapter)			\
-(((struct adapter *)_Adapter)->HardwareType == HARDWARE_TYPE_RTL8188EU)
-#define IS_HARDWARE_TYPE_8188ES(_Adapter)			\
-(((struct adapter *)_Adapter)->HardwareType == HARDWARE_TYPE_RTL8188ES)
-#define	IS_HARDWARE_TYPE_8188E(_Adapter)	\
-(IS_HARDWARE_TYPE_8188EE(_Adapter) || IS_HARDWARE_TYPE_8188EU(_Adapter) || \
- IS_HARDWARE_TYPE_8188ES(_Adapter))
-
 #define GET_EEPROM_EFUSE_PRIV(adapter) (&adapter->eeprompriv)
 
 #define is_boot_from_eeprom(adapter) (adapter->eeprompriv.EepromOrEfuse)

drivers/staging/rtl8188eu/os_dep/usb_intf.c

@@ -657,7 +657,6 @@ static struct adapter *rtw_usb_if1_init(struct dvobj_priv *dvobj,
 	padapter->hw_init_mutex = &usb_drv->hw_init_mutex;
 
 	/* step 1-1., decide the chip_type via vid/pid */
-	padapter->interface_type = RTW_USB;
 	chip_by_usb_id(padapter, pdid);
 
 	if (rtw_handle_dualmac(padapter, 1) != _SUCCESS)