Skip to content

L
linux
Commit 6048fc1c authored by Hans de Goede's avatar Hans de Goede Committed by Mauro Carvalho Chehab
Browse files
Options

media: atomisp: Remove continuous mode support 

Continues mode is a special mode where 2 /dev/video devices can be active
at the same time. Either the video-preview + video nodes or the
viewfinder (for still capture) + capture nodes.

For the video-preview + video-recording case modern userspace will
use a single stream multiplexed by pipewire.

The still-capture case is extra special only starting the preview
stream and then relying on a custom ATOMISP_IOC_S_CONT_CAPTURE_CONFIG
ioctl to set things up followed by a second stream on to capture
the amount of configured still pictures. While running the sensor
at full resolution all the time. This case too is better handled
with dma-buf + GPU downscaling for the view-finder rather then all this
custom special code. Besises this the ioctl expects a bunch of special
non error checked conditions to be met otherwise things will crash/hang.

The continues mode also involves a special cases all over the code
getting in the way of further cleanups and simplifying the code to
using just 1 /dev/video# node. So lets remove it and the
related custom ATOMISP_IOC_S_CONT_CAPTURE_CONFIG ioctl.

Link: https://lore.kernel.org/linux-media/ea81b17b-7d1f-a5e1-11dd-04db310e1e50@redhat.com/
Link: https://lore.kernel.org/r/20230221145906.8113-3-hdegoede@redhat.comSigned-off-by: default avatarHans de Goede <hdegoede@redhat.com>
Signed-off-by: default avatarMauro Carvalho Chehab <mchehab@kernel.org>
parent d33b94c0
Show whitespace changes
Inline Side-by-side
Showing with 78 additions and 787 deletions
drivers/staging/media/atomisp/include/linux/atomisp.h
View file @ 6048fc1c
......@@ -299,26 +299,6 @@ struct atomisp_3a_statistics {
u32 isp_config_id; /* isp config ID */
};
/**
* struct atomisp_cont_capture_conf - continuous capture parameters
* @num_captures: number of still images to capture
* @skip_frames: number of frames to skip between 2 captures
* @offset: offset in ring buffer to start capture
*
* For example, to capture 1 frame from past, current, and 1 from future
* and skip one frame between each capture, parameters would be:
* num_captures:3
* skip_frames:1
* offset:-2
*/
struct atomisp_cont_capture_conf {
int num_captures;
unsigned int skip_frames;
int offset;
__u32 reserved[5];
};
struct atomisp_ae_window {
int x_left;
int x_right;
......@@ -958,9 +938,6 @@ struct atomisp_sensor_ae_bracketing_lut {
#define ATOMISP_IOC_S_PARAMETERS \
_IOW('v', BASE_VIDIOC_PRIVATE + 32, struct atomisp_parameters)
#define ATOMISP_IOC_S_CONT_CAPTURE_CONFIG \
_IOWR('v', BASE_VIDIOC_PRIVATE + 33, struct atomisp_cont_capture_conf)
#define ATOMISP_IOC_G_METADATA \
_IOWR('v', BASE_VIDIOC_PRIVATE + 34, struct atomisp_metadata)
......
drivers/staging/media/atomisp/pci/atomisp_cmd.c
View file @ 6048fc1c
......@@ -79,8 +79,6 @@ union host {
} ptr;
};
static int atomisp_set_raw_buffer_bitmap(struct atomisp_sub_device *asd, int exp_id);
/*
* get sensor:dis71430/ov2720 related info from v4l2_subdev->priv data field.
* subdev->priv is set in mrst.c
......@@ -242,18 +240,6 @@ int atomisp_freq_scaling(struct atomisp_device *isp,
curr_rules.height = asd->fmt[asd->capture_pad].fmt.height;
curr_rules.fps = fps;
curr_rules.run_mode = asd->run_mode->val;
/*
* For continuous mode, we need to make the capture setting applied
* since preview mode, because there is no chance to do this when
* starting image capture.
*/
if (asd->continuous_mode->val) {
if (asd->run_mode->val == ATOMISP_RUN_MODE_VIDEO)
curr_rules.run_mode = ATOMISP_RUN_MODE_SDV;
else
curr_rules.run_mode =
ATOMISP_RUN_MODE_CONTINUOUS_CAPTURE;
}
/* search for the target frequency by looping freq rules*/
for (i = 0; i < dfs->dfs_table_size; i++) {
......@@ -746,12 +732,6 @@ enum atomisp_metadata_type
atomisp_get_metadata_type(struct atomisp_sub_device *asd,
enum ia_css_pipe_id pipe_id)
{
if (!asd->continuous_mode->val)
return ATOMISP_MAIN_METADATA;
if (pipe_id == IA_CSS_PIPE_ID_CAPTURE) /* online capture pipe */
return ATOMISP_SEC_METADATA;
else
return ATOMISP_MAIN_METADATA;
}
......@@ -883,15 +863,6 @@ void atomisp_buf_done(struct atomisp_sub_device *asd, int error,
pipe = vb_to_pipe(&frame->vb.vb2_buf);
/* FIXME:
* YUVPP doesn't set postview exp_id correctlly in SDV mode.
* This is a WORKAROUND to set exp_id. see HSDES-1503911606.
*/
if (IS_BYT && buf_type == IA_CSS_BUFFER_TYPE_SEC_VF_OUTPUT_FRAME &&
asd->continuous_mode->val && ATOMISP_USE_YUVPP(asd))
frame->exp_id = (asd->postview_exp_id++) %
(ATOMISP_MAX_EXP_ID + 1);
dev_dbg(isp->dev, "%s: vf frame with exp_id %d is ready\n",
__func__, frame->exp_id);
if (asd->params.flash_state == ATOMISP_FLASH_ONGOING) {
......@@ -908,18 +879,6 @@ void atomisp_buf_done(struct atomisp_sub_device *asd, int error,
__func__);
}
pipe->frame_config_id[frame->vb.vb2_buf.index] = frame->isp_config_id;
if (css_pipe_id == IA_CSS_PIPE_ID_CAPTURE &&
asd->pending_capture_request > 0) {
err = atomisp_css_offline_capture_configure(asd,
asd->params.offline_parm.num_captures,
asd->params.offline_parm.skip_frames,
asd->params.offline_parm.offset);
asd->pending_capture_request--;
dev_dbg(isp->dev, "Trigger capture again for new buffer. err=%d\n",
err);
}
break;
case IA_CSS_BUFFER_TYPE_OUTPUT_FRAME:
case IA_CSS_BUFFER_TYPE_SEC_OUTPUT_FRAME:
......@@ -934,15 +893,6 @@ void atomisp_buf_done(struct atomisp_sub_device *asd, int error,
pipe = vb_to_pipe(&frame->vb.vb2_buf);
/* FIXME:
* YUVPP doesn't set preview exp_id correctlly in ZSL mode.
* This is a WORKAROUND to set exp_id. see HSDES-1503911606.
*/
if (IS_BYT && buf_type == IA_CSS_BUFFER_TYPE_SEC_OUTPUT_FRAME &&
asd->continuous_mode->val && ATOMISP_USE_YUVPP(asd))
frame->exp_id = (asd->preview_exp_id++) %
(ATOMISP_MAX_EXP_ID + 1);
dev_dbg(isp->dev, "%s: main frame with exp_id %d is ready\n",
__func__, frame->exp_id);
......@@ -993,35 +943,6 @@ void atomisp_buf_done(struct atomisp_sub_device *asd, int error,
asd->params.last_frame_status = asd->frame_status[i];
if (asd->continuous_mode->val) {
if (css_pipe_id == IA_CSS_PIPE_ID_PREVIEW ||
css_pipe_id == IA_CSS_PIPE_ID_VIDEO) {
asd->latest_preview_exp_id = frame->exp_id;
} else if (css_pipe_id ==
IA_CSS_PIPE_ID_CAPTURE) {
if (asd->run_mode->val ==
ATOMISP_RUN_MODE_VIDEO)
dev_dbg(isp->dev, "SDV capture raw buffer id: %u\n",
frame->exp_id);
else
dev_dbg(isp->dev, "ZSL capture raw buffer id: %u\n",
frame->exp_id);
}
}
/*
* Only after enabled the raw buffer lock
* and in continuous mode.
* in preview/video pipe, each buffer will
* be locked automatically, so record it here.
*/
if (((css_pipe_id == IA_CSS_PIPE_ID_PREVIEW) ||
(css_pipe_id == IA_CSS_PIPE_ID_VIDEO)) &&
asd->enable_raw_buffer_lock->val &&
asd->continuous_mode->val) {
atomisp_set_raw_buffer_bitmap(asd, frame->exp_id);
WARN_ON(frame->exp_id > ATOMISP_MAX_EXP_ID);
}
if (asd->params.css_update_params_needed) {
atomisp_apply_css_parameters(asd,
&asd->params.css_param);
......@@ -1220,13 +1141,6 @@ static void __atomisp_css_recover(struct atomisp_device *isp, bool isp_timeout)
if (!stream_restart[i])
continue;
if (asd->continuous_mode->val &&
asd->delayed_init == ATOMISP_DELAYED_INIT_NOT_QUEUED) {
reinit_completion(&asd->init_done);
asd->delayed_init = ATOMISP_DELAYED_INIT_QUEUED;
queue_work(asd->delayed_init_workq,
&asd->delayed_init_work);
}
/*
* dequeueing buffers is not needed. CSS will recycle
* buffers that it has.
......@@ -2001,8 +1915,6 @@ int atomisp_get_dvs2_bq_resolutions(struct atomisp_sub_device *asd,
struct atomisp_dvs2_bq_resolutions *bq_res)
{
struct ia_css_pipe_config *pipe_cfg = NULL;
struct ia_css_stream_config *stream_cfg = NULL;
struct ia_css_stream_input_config *input_config = NULL;
struct ia_css_stream *stream =
asd->stream_env[ATOMISP_INPUT_STREAM_GENERAL].stream;
......@@ -2013,9 +1925,6 @@ int atomisp_get_dvs2_bq_resolutions(struct atomisp_sub_device *asd,
pipe_cfg = &asd->stream_env[ATOMISP_INPUT_STREAM_GENERAL]
.pipe_configs[IA_CSS_PIPE_ID_VIDEO];
stream_cfg = &asd->stream_env[ATOMISP_INPUT_STREAM_GENERAL]
.stream_config;
input_config = &stream_cfg->input_config;
if (!bq_res)
return -EINVAL;
......@@ -2027,7 +1936,6 @@ int atomisp_get_dvs2_bq_resolutions(struct atomisp_sub_device *asd,
bq_res->envelope_bq.width_bq = 0;
bq_res->envelope_bq.height_bq = 0;
/* the GDC input resolution */
if (!asd->continuous_mode->val) {
bq_res->source_bq.width_bq = bq_res->output_bq.width_bq +
pipe_cfg->dvs_envelope.width / 2;
bq_res->source_bq.height_bq = bq_res->output_bq.height_bq +
......@@ -2045,115 +1953,11 @@ int atomisp_get_dvs2_bq_resolutions(struct atomisp_sub_device *asd,
bq_res->gdc_shift_bq.height_bq = 4 / 2;
if (asd->params.video_dis_en) {
bq_res->envelope_bq.width_bq = pipe_cfg->dvs_envelope.width
/ 2 - bq_res->ispfilter_bq.width_bq;
bq_res->envelope_bq.height_bq = pipe_cfg->dvs_envelope.height
/ 2 - bq_res->ispfilter_bq.height_bq;
}
} else {
unsigned int w_padding;
unsigned int gdc_effective_input = 0;
/* For GDC:
* gdc_effective_input = effective_input + envelope
*
* From the comment and formula in BZ1786,
* we see the source_bq should be:
* effective_input / bayer_ds_ratio
*/
bq_res->source_bq.width_bq =
(input_config->effective_res.width *
pipe_cfg->bayer_ds_out_res.width /
input_config->effective_res.width + 1) / 2;
bq_res->source_bq.height_bq =
(input_config->effective_res.height *
pipe_cfg->bayer_ds_out_res.height /
input_config->effective_res.height + 1) / 2;
if (!asd->params.video_dis_en) {
/*
* We adjust the ispfilter_bq to:
* ispfilter_bq = 128/BDS
* we still need firmware team to provide an offical
* formula for SDV.
*/
bq_res->ispfilter_bq.width_bq = 128 *
pipe_cfg->bayer_ds_out_res.width /
input_config->effective_res.width / 2;
bq_res->ispfilter_bq.height_bq = 128 *
pipe_cfg->bayer_ds_out_res.width /
input_config->effective_res.width / 2;
if (IS_HWREVISION(asd->isp, ATOMISP_HW_REVISION_ISP2401)) {
/* No additional left padding for ISYS2401 */
bq_res->gdc_shift_bq.width_bq = 4 / 2;
bq_res->gdc_shift_bq.height_bq = 4 / 2;
} else {
/*
* For the w_padding and gdc_shift_bq cacluation
* Please see the BZ 1786 and 4358 for more info.
* Just test that this formula can work now,
* but we still have no offical formula.
*
* w_padding = ceiling(gdc_effective_input
* /128, 1) * 128 - effective_width
* gdc_shift_bq = w_padding/BDS/2 + ispfilter_bq/2
*/
gdc_effective_input =
input_config->effective_res.width +
pipe_cfg->dvs_envelope.width;
w_padding = roundup(gdc_effective_input, 128) -
input_config->effective_res.width;
w_padding = w_padding *
pipe_cfg->bayer_ds_out_res.width /
input_config->effective_res.width + 1;
w_padding = roundup(w_padding / 2, 1);
bq_res->gdc_shift_bq.width_bq = bq_res->ispfilter_bq.width_bq / 2
+ w_padding;
bq_res->gdc_shift_bq.height_bq = 4 / 2;
}
} else {
unsigned int dvs_w, dvs_h, dvs_w_max, dvs_h_max;
bq_res->ispfilter_bq.width_bq = 8 / 2;
bq_res->ispfilter_bq.height_bq = 8 / 2;
if (IS_HWREVISION(asd->isp, ATOMISP_HW_REVISION_ISP2401)) {
/* No additional left padding for ISYS2401 */
bq_res->gdc_shift_bq.width_bq = 4 / 2;
bq_res->gdc_shift_bq.height_bq = 4 / 2;
} else {
w_padding =
roundup(input_config->effective_res.width, 128) -
input_config->effective_res.width;
if (w_padding < 12)
w_padding = 12;
bq_res->gdc_shift_bq.width_bq = 4 / 2 +
((w_padding - 12) *
pipe_cfg->bayer_ds_out_res.width /
input_config->effective_res.width + 1) / 2;
bq_res->gdc_shift_bq.height_bq = 4 / 2;
}
dvs_w = pipe_cfg->bayer_ds_out_res.width -
pipe_cfg->output_info[0].res.width;
dvs_h = pipe_cfg->bayer_ds_out_res.height -
pipe_cfg->output_info[0].res.height;
dvs_w_max = rounddown(
pipe_cfg->output_info[0].res.width / 5,
ATOM_ISP_STEP_WIDTH);
dvs_h_max = rounddown(
pipe_cfg->output_info[0].res.height / 5,
ATOM_ISP_STEP_HEIGHT);
bq_res->envelope_bq.width_bq =
min((dvs_w / 2), (dvs_w_max / 2)) -
bq_res->envelope_bq.width_bq = pipe_cfg->dvs_envelope.width / 2 -
bq_res->ispfilter_bq.width_bq;
bq_res->envelope_bq.height_bq =
min((dvs_h / 2), (dvs_h_max / 2)) -
bq_res->envelope_bq.height_bq = pipe_cfg->dvs_envelope.height / 2 -
bq_res->ispfilter_bq.height_bq;
}
}
dev_dbg(asd->isp->dev,
"source_bq.width_bq %d, source_bq.height_bq %d,\nispfilter_bq.width_bq %d, ispfilter_bq.height_bq %d,\ngdc_shift_bq.width_bq %d, gdc_shift_bq.height_bq %d,\nenvelope_bq.width_bq %d, envelope_bq.height_bq %d,\noutput_bq.width_bq %d, output_bq.height_bq %d\n",
......@@ -3729,28 +3533,8 @@ int atomisp_param(struct atomisp_sub_device *asd, int flag,
}
/* update dvs envelop info */
if (!asd->continuous_mode->val) {
config->dvs_envelop.width = vp_cfg->dvs_envelope.width;
config->dvs_envelop.height =
vp_cfg->dvs_envelope.height;
} else {
unsigned int dvs_w, dvs_h, dvs_w_max, dvs_h_max;
dvs_w = vp_cfg->bayer_ds_out_res.width -
vp_cfg->output_info[0].res.width;
dvs_h = vp_cfg->bayer_ds_out_res.height -
vp_cfg->output_info[0].res.height;
dvs_w_max = rounddown(
vp_cfg->output_info[0].res.width / 5,
ATOM_ISP_STEP_WIDTH);
dvs_h_max = rounddown(
vp_cfg->output_info[0].res.height / 5,
ATOM_ISP_STEP_HEIGHT);
config->dvs_envelop.width = min(dvs_w, dvs_w_max);
config->dvs_envelop.height = min(dvs_h, dvs_h_max);
}
config->dvs_envelop.height = vp_cfg->dvs_envelope.height;
return 0;
}
......@@ -4417,43 +4201,6 @@ static inline int atomisp_set_sensor_mipi_to_isp(
return 0;
}
static int __enable_continuous_mode(struct atomisp_sub_device *asd,
bool enable)
{
struct atomisp_device *isp = asd->isp;
dev_dbg(isp->dev,
"continuous mode %d, raw buffers %d, stop preview %d\n",
enable, asd->continuous_raw_buffer_size->val,
!asd->continuous_viewfinder->val);
if (!IS_ISP2401)
atomisp_css_capture_set_mode(asd, IA_CSS_CAPTURE_MODE_PRIMARY);
else
atomisp_update_capture_mode(asd);
/* in case of ANR, force capture pipe to offline mode */
atomisp_css_capture_enable_online(asd, ATOMISP_INPUT_STREAM_GENERAL,
asd->params.low_light ? false : !enable);
atomisp_css_preview_enable_online(asd, ATOMISP_INPUT_STREAM_GENERAL,
!enable);
atomisp_css_enable_continuous(asd, enable);
atomisp_css_enable_cvf(asd, asd->continuous_viewfinder->val);
atomisp_css_continuous_set_num_raw_frames(asd,
asd->continuous_raw_buffer_size->val);
if (!enable) {
atomisp_css_enable_raw_binning(asd, false);
atomisp_css_input_set_two_pixels_per_clock(asd, false);
}
if (isp->inputs[asd->input_curr].type != FILE_INPUT)
atomisp_css_input_set_mode(asd, IA_CSS_INPUT_MODE_BUFFERED_SENSOR);
return atomisp_update_run_mode(asd);
}
static int configure_pp_input_nop(struct atomisp_sub_device *asd,
unsigned int width, unsigned int height)
{
......@@ -4495,17 +4242,6 @@ static int css_input_resolution_changed(struct atomisp_sub_device *asd,
else
atomisp_css_input_set_two_pixels_per_clock(asd, true);
if (asd->continuous_mode->val) {
/* Note for all checks: ffmt includes pad_w+pad_h */
if (asd->run_mode->val == ATOMISP_RUN_MODE_VIDEO ||
(ffmt->width >= 2048 || ffmt->height >= 1536)) {
/*
* For preview pipe, enable only if resolution
* is >= 3M for ISP2400.
*/
atomisp_css_enable_raw_binning(asd, true);
}
}
/*
* If sensor input changed, which means metadata resolution changed
* together. Release all metadata buffers here to let it re-allocated
......@@ -4648,12 +4384,6 @@ static int atomisp_set_fmt_to_isp(struct video_device *vdev,
}
}
if (asd->continuous_mode->val) {
ret = __enable_continuous_mode(asd, true);
if (ret)
return -EINVAL;
}
atomisp_css_input_set_mode(asd, IA_CSS_INPUT_MODE_BUFFERED_SENSOR);
for (i = 0; i < IA_CSS_PIPE_ID_NUM; i++)
......@@ -4669,36 +4399,9 @@ static int atomisp_set_fmt_to_isp(struct video_device *vdev,
get_frame_info = atomisp_css_video_get_output_frame_info;
pipe_id = IA_CSS_PIPE_ID_VIDEO;
} else if (asd->run_mode->val == ATOMISP_RUN_MODE_VIDEO) {
if (!asd->continuous_mode->val) {
configure_output = atomisp_css_video_configure_output;
get_frame_info =
atomisp_css_video_get_output_frame_info;
pipe_id = IA_CSS_PIPE_ID_VIDEO;
} else {
if (source_pad == ATOMISP_SUBDEV_PAD_SOURCE_PREVIEW ||
source_pad == ATOMISP_SUBDEV_PAD_SOURCE_VIDEO) {
configure_output =
atomisp_css_video_configure_output;
get_frame_info =
atomisp_css_video_get_output_frame_info;
configure_pp_input =
atomisp_css_video_configure_pp_input;
get_frame_info = atomisp_css_video_get_output_frame_info;
pipe_id = IA_CSS_PIPE_ID_VIDEO;
} else {
configure_output =
atomisp_css_capture_configure_output;
get_frame_info =
atomisp_css_capture_get_output_frame_info;
configure_pp_input =
atomisp_css_capture_configure_pp_input;
pipe_id = IA_CSS_PIPE_ID_CAPTURE;
atomisp_update_capture_mode(asd);
atomisp_css_capture_enable_online(asd,
ATOMISP_INPUT_STREAM_GENERAL,
false);
}
}
} else if (source_pad == ATOMISP_SUBDEV_PAD_SOURCE_PREVIEW) {
configure_output = atomisp_css_preview_configure_output;
get_frame_info = atomisp_css_preview_get_output_frame_info;
......@@ -4719,7 +4422,6 @@ static int atomisp_set_fmt_to_isp(struct video_device *vdev,
atomisp_update_capture_mode(asd);
}
if (!asd->continuous_mode->val)
/* in case of ANR, force capture pipe to offline mode */
atomisp_css_capture_enable_online(asd, ATOMISP_INPUT_STREAM_GENERAL,
asd->params.low_light ?
......@@ -4730,15 +4432,13 @@ static int atomisp_set_fmt_to_isp(struct video_device *vdev,
configure_pp_input = atomisp_css_capture_configure_pp_input;
pipe_id = IA_CSS_PIPE_ID_CAPTURE;
if (!asd->params.online_process &&
!asd->continuous_mode->val) {
if (!asd->params.online_process) {
ret = atomisp_css_capture_get_output_raw_frame_info(asd,
raw_output_info);
if (ret)
return ret;
}
if (!asd->continuous_mode->val && asd->run_mode->val
!= ATOMISP_RUN_MODE_STILL_CAPTURE) {
if (asd->run_mode->val != ATOMISP_RUN_MODE_STILL_CAPTURE) {
dev_err(isp->dev,
"Need to set the running mode first\n");
asd->run_mode->val = ATOMISP_RUN_MODE_STILL_CAPTURE;
......@@ -4793,7 +4493,7 @@ static int atomisp_set_fmt_to_isp(struct video_device *vdev,
ia_css_frame_free(asd->raw_output_frame);
asd->raw_output_frame = NULL;
if (!asd->continuous_mode->val && !asd->params.online_process &&
if (!asd->params.online_process &&
ia_css_frame_allocate_from_info(&asd->raw_output_frame,
raw_output_info))
return -ENOMEM;
......@@ -4965,7 +4665,6 @@ int atomisp_set_fmt(struct video_device *vdev, struct v4l2_format *f)
unsigned int dvs_env_w = 0, dvs_env_h = 0;
unsigned int padding_w = pad_w, padding_h = pad_h;
bool res_overflow = false, crop_needs_override = false;
struct v4l2_mbus_framefmt *isp_sink_fmt;
struct v4l2_mbus_framefmt isp_source_fmt = {0};
struct v4l2_subdev_format vformat = {
.which = V4L2_SUBDEV_FORMAT_ACTIVE,
......@@ -5129,10 +4828,6 @@ int atomisp_set_fmt(struct video_device *vdev, struct v4l2_format *f)
ATOMISP_SUBDEV_PAD_SINK)->code =
snr_format_bridge->mbus_code;
isp_sink_fmt = atomisp_subdev_get_ffmt(&asd->subdev, NULL,
V4L2_SUBDEV_FORMAT_ACTIVE,
ATOMISP_SUBDEV_PAD_SINK);
isp_source_fmt.code = format_bridge->mbus_code;
atomisp_subdev_set_ffmt(&asd->subdev, fh.state,
V4L2_SUBDEV_FORMAT_ACTIVE,
......@@ -5144,7 +4839,7 @@ int atomisp_set_fmt(struct video_device *vdev, struct v4l2_format *f)
}
/* construct resolution supported by isp */
if (res_overflow && !asd->continuous_mode->val) {
if (res_overflow) {
f->fmt.pix.width = rounddown(
clamp_t(u32, f->fmt.pix.width - padding_w,
ATOM_ISP_MIN_WIDTH,
......@@ -5158,35 +4853,8 @@ int atomisp_set_fmt(struct video_device *vdev, struct v4l2_format *f)
atomisp_get_dis_envelop(asd, f->fmt.pix.width, f->fmt.pix.height,
&dvs_env_w, &dvs_env_h);
if (asd->continuous_mode->val) {
struct v4l2_rect *r;
r = atomisp_subdev_get_rect(
&asd->subdev, NULL,
V4L2_SUBDEV_FORMAT_ACTIVE,
ATOMISP_SUBDEV_PAD_SOURCE_CAPTURE,
V4L2_SEL_TGT_COMPOSE);
/*
* The ATOMISP_SUBDEV_PAD_SOURCE_CAPTURE should get resolutions
* properly set otherwise, it should not be the capture_pad.
*/
if (r->width && r->height)
asd->capture_pad = ATOMISP_SUBDEV_PAD_SOURCE_CAPTURE;
else
asd->capture_pad = source_pad;
} else {
asd->capture_pad = source_pad;
}
/*
* set format info to sensor
* In continuous mode, resolution is set only if it is higher than
* existing value. This because preview pipe will be configured after
* capture pipe and usually has lower resolution than capture pipe.
*/
if (!asd->continuous_mode->val ||
isp_sink_fmt->width < (f->fmt.pix.width + padding_w + dvs_env_w) ||
isp_sink_fmt->height < (f->fmt.pix.height + padding_h +
dvs_env_h)) {
/*
* For jpeg or custom raw format the sensor will return constant
* width and height. Because we already had quried try_mbus_fmt,
......@@ -5202,9 +4870,9 @@ int atomisp_set_fmt(struct video_device *vdev, struct v4l2_format *f)
s_fmt.width = backup_fmt.width;
s_fmt.height = backup_fmt.height;
}
ret = atomisp_set_fmt_to_snr(vdev, &s_fmt,
f->fmt.pix.pixelformat, padding_w,
padding_h, dvs_env_w, dvs_env_h);
ret = atomisp_set_fmt_to_snr(vdev, &s_fmt, f->fmt.pix.pixelformat,
padding_w, padding_h, dvs_env_w, dvs_env_h);
if (ret) {
dev_warn(isp->dev,
"Set format to sensor failed with %d\n", ret);
......@@ -5213,7 +4881,6 @@ int atomisp_set_fmt(struct video_device *vdev, struct v4l2_format *f)
atomisp_csi_lane_config(isp);
crop_needs_override = true;
}
atomisp_check_copy_mode(asd, source_pad, &backup_fmt);
asd->yuvpp_mode = false; /* Reset variable */
......@@ -5228,27 +4895,10 @@ int atomisp_set_fmt(struct video_device *vdev, struct v4l2_format *f)
if (isp_sink_crop.width * 9 / 10 < f->fmt.pix.width ||
isp_sink_crop.height * 9 / 10 < f->fmt.pix.height ||
(atomisp_subdev_format_conversion(asd, source_pad) &&
((asd->run_mode->val == ATOMISP_RUN_MODE_VIDEO &&
!asd->continuous_mode->val) ||
(asd->run_mode->val == ATOMISP_RUN_MODE_VIDEO ||
asd->vfpp->val == ATOMISP_VFPP_DISABLE_SCALER))) {
/* for continuous mode, preview size might be smaller than
* still capture size. if preview size still needs crop,
* pick the larger one between crop size of preview and
* still capture.
*/
if (asd->continuous_mode->val
&& source_pad == ATOMISP_SUBDEV_PAD_SOURCE_PREVIEW
&& !crop_needs_override) {
isp_sink_crop.width =
max_t(unsigned int, f->fmt.pix.width,
isp_sink_crop.width);
isp_sink_crop.height =
max_t(unsigned int, f->fmt.pix.height,
isp_sink_crop.height);
} else {
isp_sink_crop.width = f->fmt.pix.width;
isp_sink_crop.height = f->fmt.pix.height;
}
atomisp_subdev_set_selection(&asd->subdev, fh.state,
V4L2_SUBDEV_FORMAT_ACTIVE,
......@@ -5448,71 +5098,6 @@ int atomisp_set_shading_table(struct atomisp_sub_device *asd,
return ret;
}
int atomisp_offline_capture_configure(struct atomisp_sub_device *asd,
struct atomisp_cont_capture_conf *cvf_config)
{
struct v4l2_ctrl *c;
lockdep_assert_held(&asd->isp->mutex);
/*
* In case of M10MO ZSL capture case, we need to issue a separate
* capture request to M10MO which will output captured jpeg image
*/
c = v4l2_ctrl_find(
asd->isp->inputs[asd->input_curr].camera->ctrl_handler,
V4L2_CID_START_ZSL_CAPTURE);
if (c) {
int ret;
dev_dbg(asd->isp->dev, "%s trigger ZSL capture request\n",
__func__);
/* TODO: use the cvf_config */
ret = v4l2_ctrl_s_ctrl(c, 1);
if (ret)
return ret;
return v4l2_ctrl_s_ctrl(c, 0);
}
asd->params.offline_parm = *cvf_config;
if (asd->params.offline_parm.num_captures) {
if (asd->streaming == ATOMISP_DEVICE_STREAMING_DISABLED) {
unsigned int init_raw_num;
if (asd->enable_raw_buffer_lock->val) {
init_raw_num =
ATOMISP_CSS2_NUM_OFFLINE_INIT_CONTINUOUS_FRAMES_LOCK_EN;
if (asd->run_mode->val == ATOMISP_RUN_MODE_VIDEO &&
asd->params.video_dis_en)
init_raw_num +=
ATOMISP_CSS2_NUM_DVS_FRAME_DELAY;
} else {
init_raw_num =
ATOMISP_CSS2_NUM_OFFLINE_INIT_CONTINUOUS_FRAMES;
}
/* TODO: this can be removed once user-space
* has been updated to use control API */
asd->continuous_raw_buffer_size->val =
max_t(int,
asd->continuous_raw_buffer_size->val,
asd->params.offline_parm.
num_captures + init_raw_num);
asd->continuous_raw_buffer_size->val =
min_t(int, ATOMISP_CONT_RAW_FRAMES,
asd->continuous_raw_buffer_size->val);
}
asd->continuous_mode->val = true;
} else {
asd->continuous_mode->val = false;
__enable_continuous_mode(asd, false);
}
return 0;
}
/*
* set auto exposure metering window to camera sensor
*/
......@@ -5609,53 +5194,6 @@ void atomisp_init_raw_buffer_bitmap(struct atomisp_sub_device *asd)
spin_unlock_irqrestore(&asd->raw_buffer_bitmap_lock, flags);
}
static int atomisp_set_raw_buffer_bitmap(struct atomisp_sub_device *asd, int exp_id)
{
int *bitmap, bit;
unsigned long flags;
if (__checking_exp_id(asd, exp_id))
return -EINVAL;
bitmap = asd->raw_buffer_bitmap + exp_id / 32;
bit = exp_id % 32;
spin_lock_irqsave(&asd->raw_buffer_bitmap_lock, flags);
(*bitmap) |= (1 << bit);
asd->raw_buffer_locked_count++;
spin_unlock_irqrestore(&asd->raw_buffer_bitmap_lock, flags);
dev_dbg(asd->isp->dev, "%s: exp_id %d, raw_buffer_locked_count %d\n",
__func__, exp_id, asd->raw_buffer_locked_count);
/* Check if the raw buffer after next is still locked!!! */
exp_id += 2;
if (exp_id > ATOMISP_MAX_EXP_ID)
exp_id -= ATOMISP_MAX_EXP_ID;
bitmap = asd->raw_buffer_bitmap + exp_id / 32;
bit = exp_id % 32;
if ((*bitmap) & (1 << bit)) {
int ret;
/* WORKAROUND unlock the raw buffer compulsively */
ret = atomisp_css_exp_id_unlock(asd, exp_id);
if (ret) {
dev_err(asd->isp->dev,
"%s exp_id is wrapping back to %d but force unlock failed, err %d.\n",
__func__, exp_id, ret);
return ret;
}
spin_lock_irqsave(&asd->raw_buffer_bitmap_lock, flags);
(*bitmap) &= ~(1 << bit);
asd->raw_buffer_locked_count--;
spin_unlock_irqrestore(&asd->raw_buffer_bitmap_lock, flags);
dev_warn(asd->isp->dev,
"%s exp_id is wrapping back to %d but it is still locked so force unlock it, raw_buffer_locked_count %d\n",
__func__, exp_id, asd->raw_buffer_locked_count);
}
return 0;
}
static int __is_raw_buffer_locked(struct atomisp_sub_device *asd, int exp_id)
{
int *bitmap, bit;
......
drivers/staging/media/atomisp/pci/atomisp_cmd.h
View file @ 6048fc1c
......@@ -268,9 +268,6 @@ int atomisp_set_fmt(struct video_device *vdev, struct v4l2_format *f);
int atomisp_set_shading_table(struct atomisp_sub_device *asd,
struct atomisp_shading_table *shading_table);
int atomisp_offline_capture_configure(struct atomisp_sub_device *asd,
struct atomisp_cont_capture_conf *cvf_config);
void atomisp_free_internal_buffers(struct atomisp_sub_device *asd);
int atomisp_s_ae_window(struct atomisp_sub_device *asd,
......
drivers/staging/media/atomisp/pci/atomisp_compat_css20.c
View file @ 6048fc1c
......@@ -658,13 +658,10 @@ static bool is_pipe_valid_to_current_run_mode(struct atomisp_sub_device *asd,
return false;
case ATOMISP_RUN_MODE_PREVIEW:
if (!asd->continuous_mode->val) {
if (pipe_id == IA_CSS_PIPE_ID_PREVIEW)
return true;
return false;
}
fallthrough;
case ATOMISP_RUN_MODE_CONTINUOUS_CAPTURE:
if (pipe_id == IA_CSS_PIPE_ID_CAPTURE ||
pipe_id == IA_CSS_PIPE_ID_PREVIEW)
......@@ -672,14 +669,10 @@ static bool is_pipe_valid_to_current_run_mode(struct atomisp_sub_device *asd,
return false;
case ATOMISP_RUN_MODE_VIDEO:
if (!asd->continuous_mode->val) {
if (pipe_id == IA_CSS_PIPE_ID_VIDEO ||
pipe_id == IA_CSS_PIPE_ID_YUVPP)
if (pipe_id == IA_CSS_PIPE_ID_VIDEO || pipe_id == IA_CSS_PIPE_ID_YUVPP)
return true;
else
return false;
}
fallthrough;
case ATOMISP_RUN_MODE_SDV:
if (pipe_id == IA_CSS_PIPE_ID_CAPTURE ||
pipe_id == IA_CSS_PIPE_ID_VIDEO)
......@@ -2139,17 +2132,8 @@ static void __configure_video_preview_output(struct atomisp_sub_device *asd,
__pipe_id_to_pipe_mode(asd, pipe_id);
stream_env->update_pipe[pipe_id] = true;
/*
* second_output will be as video main output in SDV mode
* with SOC camera. output will be as video main output in
* normal video mode.
*/
if (asd->continuous_mode->val)
css_output_info = &stream_env->pipe_configs[pipe_id].
output_info[ATOMISP_CSS_OUTPUT_SECOND_INDEX];
else
css_output_info = &stream_env->pipe_configs[pipe_id].
output_info[ATOMISP_CSS_OUTPUT_DEFAULT_INDEX];
css_output_info =
&stream_env->pipe_configs[pipe_id].output_info[ATOMISP_CSS_OUTPUT_DEFAULT_INDEX];
css_output_info->res.width = width;
css_output_info->res.height = height;
......@@ -2485,17 +2469,8 @@ static void __configure_video_vf_output(struct atomisp_sub_device *asd,
__pipe_id_to_pipe_mode(asd, pipe_id);
stream_env->update_pipe[pipe_id] = true;
/*
* second_vf_output will be as video viewfinder in SDV mode
* with SOC camera. vf_output will be as video viewfinder in
* normal video mode.
*/
if (asd->continuous_mode->val)
css_output_info = &stream_env->pipe_configs[pipe_id].
vf_output_info[ATOMISP_CSS_OUTPUT_SECOND_INDEX];
else
css_output_info = &stream_env->pipe_configs[pipe_id].
vf_output_info[ATOMISP_CSS_OUTPUT_DEFAULT_INDEX];
css_output_info =
&stream_env->pipe_configs[pipe_id].vf_output_info[ATOMISP_CSS_OUTPUT_DEFAULT_INDEX];
css_output_info->res.width = width;
css_output_info->res.height = height;
......@@ -2636,12 +2611,7 @@ int atomisp_get_css_frame_info(struct atomisp_sub_device *asd,
*frame_info = info.output_info[0];
break;
case ATOMISP_SUBDEV_PAD_SOURCE_VIDEO:
if (ATOMISP_USE_YUVPP(asd) && asd->continuous_mode->val)
*frame_info = info.
output_info[ATOMISP_CSS_OUTPUT_SECOND_INDEX];
else
*frame_info = info.
output_info[ATOMISP_CSS_OUTPUT_DEFAULT_INDEX];
*frame_info = info.output_info[ATOMISP_CSS_OUTPUT_DEFAULT_INDEX];
break;
case ATOMISP_SUBDEV_PAD_SOURCE_VF:
if (stream_index == ATOMISP_INPUT_STREAM_POSTVIEW)
......@@ -2653,15 +2623,7 @@ int atomisp_get_css_frame_info(struct atomisp_sub_device *asd,
if (asd->run_mode->val == ATOMISP_RUN_MODE_VIDEO &&
(pipe_index == IA_CSS_PIPE_ID_VIDEO ||
pipe_index == IA_CSS_PIPE_ID_YUVPP))
if (ATOMISP_USE_YUVPP(asd) && asd->continuous_mode->val)
*frame_info = info.
vf_output_info[ATOMISP_CSS_OUTPUT_SECOND_INDEX];
else
*frame_info = info.
vf_output_info[ATOMISP_CSS_OUTPUT_DEFAULT_INDEX];
else if (ATOMISP_USE_YUVPP(asd) && asd->continuous_mode->val)
*frame_info =
info.output_info[ATOMISP_CSS_OUTPUT_SECOND_INDEX];
*frame_info = info.vf_output_info[ATOMISP_CSS_OUTPUT_DEFAULT_INDEX];
else
*frame_info =
info.output_info[ATOMISP_CSS_OUTPUT_DEFAULT_INDEX];
......@@ -2826,8 +2788,6 @@ int atomisp_css_video_get_viewfinder_frame_info(
if (ATOMISP_USE_YUVPP(asd)) {
pipe_id = IA_CSS_PIPE_ID_YUVPP;
if (asd->continuous_mode->val)
frame_type = ATOMISP_CSS_SECOND_VF_FRAME;
} else {
pipe_id = IA_CSS_PIPE_ID_VIDEO;
}
......@@ -2880,8 +2840,6 @@ int atomisp_css_preview_get_output_frame_info(
if (ATOMISP_USE_YUVPP(asd)) {
pipe_id = IA_CSS_PIPE_ID_YUVPP;
if (asd->continuous_mode->val)
frame_type = ATOMISP_CSS_SECOND_OUTPUT_FRAME;
} else {
pipe_id = IA_CSS_PIPE_ID_PREVIEW;
}
......@@ -2914,8 +2872,6 @@ int atomisp_css_video_get_output_frame_info(
if (ATOMISP_USE_YUVPP(asd)) {
pipe_id = IA_CSS_PIPE_ID_YUVPP;
if (asd->continuous_mode->val)
frame_type = ATOMISP_CSS_SECOND_OUTPUT_FRAME;
} else {
pipe_id = IA_CSS_PIPE_ID_VIDEO;
}
......
drivers/staging/media/atomisp/pci/atomisp_fops.c
View file @ 6048fc1c
......@@ -348,31 +348,6 @@ static int atomisp_get_css_buf_type(struct atomisp_sub_device *asd,
uint16_t source_pad)
{
if (ATOMISP_USE_YUVPP(asd)) {
/* when run ZSL case */
if (asd->continuous_mode->val &&
asd->run_mode->val == ATOMISP_RUN_MODE_PREVIEW) {
if (source_pad == ATOMISP_SUBDEV_PAD_SOURCE_CAPTURE)
return IA_CSS_BUFFER_TYPE_OUTPUT_FRAME;
else if (source_pad == ATOMISP_SUBDEV_PAD_SOURCE_PREVIEW)
return IA_CSS_BUFFER_TYPE_SEC_OUTPUT_FRAME;
else
return IA_CSS_BUFFER_TYPE_VF_OUTPUT_FRAME;
}
/*when run SDV case*/
if (asd->continuous_mode->val &&
asd->run_mode->val == ATOMISP_RUN_MODE_VIDEO) {
if (source_pad == ATOMISP_SUBDEV_PAD_SOURCE_CAPTURE)
return IA_CSS_BUFFER_TYPE_OUTPUT_FRAME;
else if (source_pad == ATOMISP_SUBDEV_PAD_SOURCE_PREVIEW)
return IA_CSS_BUFFER_TYPE_SEC_VF_OUTPUT_FRAME;
else if (source_pad == ATOMISP_SUBDEV_PAD_SOURCE_VIDEO)
return IA_CSS_BUFFER_TYPE_SEC_OUTPUT_FRAME;
else
return IA_CSS_BUFFER_TYPE_VF_OUTPUT_FRAME;
}
/*other case: default setting*/
if (source_pad == ATOMISP_SUBDEV_PAD_SOURCE_CAPTURE ||
source_pad == ATOMISP_SUBDEV_PAD_SOURCE_VIDEO ||
(source_pad == ATOMISP_SUBDEV_PAD_SOURCE_PREVIEW &&
......@@ -414,22 +389,10 @@ int atomisp_qbuffers_to_css(struct atomisp_sub_device *asd)
preview_pipe = &asd->video_out_capture;
css_preview_pipe_id = IA_CSS_PIPE_ID_CAPTURE;
} else if (asd->run_mode->val == ATOMISP_RUN_MODE_VIDEO) {
if (asd->continuous_mode->val) {
capture_pipe = &asd->video_out_capture;
vf_pipe = &asd->video_out_vf;
css_capture_pipe_id = IA_CSS_PIPE_ID_CAPTURE;
}
video_pipe = &asd->video_out_video_capture;
preview_pipe = &asd->video_out_preview;
css_video_pipe_id = IA_CSS_PIPE_ID_VIDEO;
css_preview_pipe_id = IA_CSS_PIPE_ID_VIDEO;
} else if (asd->continuous_mode->val) {
capture_pipe = &asd->video_out_capture;
vf_pipe = &asd->video_out_vf;
preview_pipe = &asd->video_out_preview;
css_preview_pipe_id = IA_CSS_PIPE_ID_PREVIEW;
css_capture_pipe_id = IA_CSS_PIPE_ID_CAPTURE;
} else if (asd->run_mode->val == ATOMISP_RUN_MODE_PREVIEW) {
preview_pipe = &asd->video_out_preview;
css_preview_pipe_id = IA_CSS_PIPE_ID_PREVIEW;
......@@ -545,7 +508,6 @@ static void atomisp_buf_queue(struct vb2_buffer *vb)
struct atomisp_video_pipe *pipe = vb_to_pipe(vb);
struct ia_css_frame *frame = vb_to_frame(vb);
struct atomisp_sub_device *asd = pipe->asd;
u16 source_pad = atomisp_subdev_source_pad(&pipe->vdev);
unsigned long irqflags;
int ret;
......@@ -593,21 +555,6 @@ static void atomisp_buf_queue(struct vb2_buffer *vb)
atomisp_qbuffers_to_css(asd);
}
/*
* Workaround: Due to the design of HALv3,
* sometimes in ZSL or SDV mode HAL needs to
* capture multiple images within one streaming cycle.
* But the capture number cannot be determined by HAL.
* So HAL only sets the capture number to be 1 and queue multiple
* buffers. Atomisp driver needs to check this case and re-trigger
* CSS to do capture when new buffer is queued.
*/
if (asd->continuous_mode->val && source_pad == ATOMISP_SUBDEV_PAD_SOURCE_CAPTURE &&
!asd->enable_raw_buffer_lock->val && asd->params.offline_parm.num_captures == 1) {
asd->pending_capture_request++;
dev_dbg(asd->isp->dev, "Add one pending capture request.\n");
}
out_unlock:
mutex_unlock(&asd->isp->mutex);
}
......@@ -667,9 +614,6 @@ static void atomisp_subdev_init_struct(struct atomisp_sub_device *asd)
/* s3a grid not enabled for any pipe */
asd->params.s3a_enabled_pipe = IA_CSS_PIPE_ID_NUM;
asd->params.offline_parm.num_captures = 1;
asd->params.offline_parm.skip_frames = 0;
asd->params.offline_parm.offset = 0;
asd->delayed_init = ATOMISP_DELAYED_INIT_NOT_QUEUED;
/* Add for channel */
asd->input_curr = 0;
......
drivers/staging/media/atomisp/pci/atomisp_ioctl.c
View file @ 6048fc1c
......@@ -1123,13 +1123,6 @@ enum ia_css_pipe_id atomisp_get_css_pipe_id(struct atomisp_sub_device *asd)
if (ATOMISP_USE_YUVPP(asd))
return IA_CSS_PIPE_ID_YUVPP;
if (asd->continuous_mode->val) {
if (asd->run_mode->val == ATOMISP_RUN_MODE_VIDEO)
return IA_CSS_PIPE_ID_VIDEO;
else
return IA_CSS_PIPE_ID_PREVIEW;
}
/*
* Disable vf_pp and run CSS in video mode. This allows using ISP
* scaling but it has one frame delay due to CSS internal buffering.
......@@ -1164,10 +1157,7 @@ static unsigned int atomisp_sensor_start_stream(struct atomisp_sub_device *asd)
if (asd->run_mode->val == ATOMISP_RUN_MODE_VIDEO ||
(asd->run_mode->val == ATOMISP_RUN_MODE_STILL_CAPTURE &&
!atomisp_is_mbuscode_raw(
asd->fmt[
asd->capture_pad].fmt.code) &&
!asd->continuous_mode->val))
!atomisp_is_mbuscode_raw(asd->fmt[asd->capture_pad].fmt.code)))
return 2;
else
return 1;
......@@ -1221,57 +1211,7 @@ int atomisp_start_streaming(struct vb2_queue *vq, unsigned int count)
*/
sensor_start_stream = atomisp_sensor_start_stream(asd);
/* Reset pending capture request count. */
asd->pending_capture_request = 0;
if (atomisp_subdev_streaming_count(asd) > sensor_start_stream) {
/* trigger still capture */
if (asd->continuous_mode->val &&
atomisp_subdev_source_pad(vdev)
== ATOMISP_SUBDEV_PAD_SOURCE_CAPTURE) {
if (asd->run_mode->val == ATOMISP_RUN_MODE_VIDEO)
dev_dbg(isp->dev, "SDV last video raw buffer id: %u\n",
asd->latest_preview_exp_id);
else
dev_dbg(isp->dev, "ZSL last preview raw buffer id: %u\n",
asd->latest_preview_exp_id);
if (asd->delayed_init == ATOMISP_DELAYED_INIT_QUEUED) {
flush_work(&asd->delayed_init_work);
mutex_unlock(&isp->mutex);
ret = wait_for_completion_interruptible(&asd->init_done);
mutex_lock(&isp->mutex);
if (ret) {
ret = -ERESTARTSYS;
goto out_unlock;
}
}
/* handle per_frame_setting parameter and buffers */
atomisp_handle_parameter_and_buffer(pipe);
/*
* only ZSL/SDV capture request will be here, raise
* the ISP freq to the highest possible to minimize
* the S2S latency.
*/
atomisp_freq_scaling(isp, ATOMISP_DFS_MODE_MAX, false);
/*
* When asd->enable_raw_buffer_lock->val is true,
* An extra IOCTL is needed to call
* atomisp_css_exp_id_capture and trigger real capture
*/
if (!asd->enable_raw_buffer_lock->val) {
ret = atomisp_css_offline_capture_configure(asd,
asd->params.offline_parm.num_captures,
asd->params.offline_parm.skip_frames,
asd->params.offline_parm.offset);
if (ret) {
ret = -EINVAL;
goto out_unlock;
}
}
}
atomisp_qbuffers_to_css(asd);
ret = 0;
goto out_unlock;
......@@ -1369,17 +1309,7 @@ int atomisp_start_streaming(struct vb2_queue *vq, unsigned int count)
goto out_unlock;
}
if (asd->continuous_mode->val) {
atomisp_subdev_get_ffmt(&asd->subdev, NULL,
V4L2_SUBDEV_FORMAT_ACTIVE,
ATOMISP_SUBDEV_PAD_SINK);
reinit_completion(&asd->init_done);
asd->delayed_init = ATOMISP_DELAYED_INIT_QUEUED;
queue_work(asd->delayed_init_workq, &asd->delayed_init_work);
} else {
asd->delayed_init = ATOMISP_DELAYED_INIT_NOT_QUEUED;
}
out_unlock:
mutex_unlock(&isp->mutex);
......@@ -1420,24 +1350,6 @@ void atomisp_stop_streaming(struct vb2_queue *vq)
if (ret == 0)
dev_warn(isp->dev, "Warning timeout waiting for CSS to return buffers\n");
/*
* do only videobuf_streamoff for capture & vf pipes in
* case of continuous capture
*/
if (asd->continuous_mode->val &&
atomisp_subdev_source_pad(vdev) != ATOMISP_SUBDEV_PAD_SOURCE_PREVIEW &&
atomisp_subdev_source_pad(vdev) != ATOMISP_SUBDEV_PAD_SOURCE_VIDEO) {
if (atomisp_subdev_source_pad(vdev) == ATOMISP_SUBDEV_PAD_SOURCE_CAPTURE) {
/* stop continuous still capture if needed */
if (asd->params.offline_parm.num_captures == -1)
atomisp_css_offline_capture_configure(asd,
0, 0, 0);
atomisp_freq_scaling(isp, ATOMISP_DFS_MODE_AUTO, false);
}
goto out_unlock;
}
if (asd->streaming == ATOMISP_DEVICE_STREAMING_ENABLED)
first_streamoff = true;
......@@ -2245,9 +2157,6 @@ static long atomisp_vidioc_default(struct file *file, void *fh,
err = atomisp_set_parameters(vdev, arg);
break;
case ATOMISP_IOC_S_CONT_CAPTURE_CONFIG:
err = atomisp_offline_capture_configure(asd, arg);
break;
case ATOMISP_IOC_G_METADATA:
err = atomisp_get_metadata(asd, 0, arg);
break;
......
drivers/staging/media/atomisp/pci/atomisp_subdev.c
View file @ 6048fc1c
......@@ -427,8 +427,7 @@ int atomisp_subdev_set_selection(struct v4l2_subdev *sd,
isp_sd->params.video_dis_en = 0;
if (isp_sd->params.video_dis_en &&
isp_sd->run_mode->val == ATOMISP_RUN_MODE_VIDEO &&
!isp_sd->continuous_mode->val) {
isp_sd->run_mode->val == ATOMISP_RUN_MODE_VIDEO) {
/* This resolution contains 20 % of DVS slack
* (of the desired captured image before
* scaling, or 1 / 6 of what we get from the
......@@ -459,8 +458,7 @@ int atomisp_subdev_set_selection(struct v4l2_subdev *sd,
break;
if (isp_sd->params.video_dis_en &&
isp_sd->run_mode->val == ATOMISP_RUN_MODE_VIDEO &&
!isp_sd->continuous_mode->val) {
isp_sd->run_mode->val == ATOMISP_RUN_MODE_VIDEO) {
dvs_w = rounddown(crop[pad]->width / 5,
ATOM_ISP_STEP_WIDTH);
dvs_h = rounddown(crop[pad]->height / 5,
......@@ -727,10 +725,6 @@ static int __atomisp_update_run_mode(struct atomisp_sub_device *asd)
struct v4l2_ctrl *c;
s32 mode;
if (ctrl->val != ATOMISP_RUN_MODE_VIDEO &&
asd->continuous_mode->val)
mode = ATOMISP_RUN_MODE_PREVIEW;
else
mode = ctrl->val;
c = v4l2_ctrl_find(
......@@ -816,24 +810,6 @@ static const struct v4l2_ctrl_config ctrl_vfpp = {
.qmenu = ctrl_vfpp_mode_menu,
};
/*
* Control for ISP continuous mode
*
* When enabled, capture processing is possible without
* stopping the preview pipeline. When disabled, ISP needs
* to be restarted between preview and capture.
*/
static const struct v4l2_ctrl_config ctrl_continuous_mode = {
.ops = &ctrl_ops,
.id = V4L2_CID_ATOMISP_CONTINUOUS_MODE,
.type = V4L2_CTRL_TYPE_BOOLEAN,
.name = "Continuous mode",
.min = 0,
.max = 1,
.step = 1,
.def = 0,
};
/*
* Control for continuous mode raw buffer size
*
......@@ -1040,8 +1016,6 @@ static int isp_subdev_init_entities(struct atomisp_sub_device *asd)
&ctrl_run_mode, NULL);
asd->vfpp = v4l2_ctrl_new_custom(&asd->ctrl_handler,
&ctrl_vfpp, NULL);
asd->continuous_mode = v4l2_ctrl_new_custom(&asd->ctrl_handler,
&ctrl_continuous_mode, NULL);
asd->continuous_viewfinder = v4l2_ctrl_new_custom(&asd->ctrl_handler,
&ctrl_continuous_viewfinder,
NULL);
......
drivers/staging/media/atomisp/pci/atomisp_subdev.h
View file @ 6048fc1c
......@@ -237,8 +237,6 @@ struct atomisp_subdev_params {
enum atomisp_flash_state flash_state;
enum atomisp_frame_status last_frame_status;
/* continuous capture */
struct atomisp_cont_capture_conf offline_parm;
/* Flag to check if driver needs to update params to css */
bool css_update_params_needed;
};
......@@ -267,7 +265,6 @@ struct atomisp_sub_device {
struct v4l2_ctrl *fmt_auto;
struct v4l2_ctrl *run_mode;
struct v4l2_ctrl *vfpp;
struct v4l2_ctrl *continuous_mode;
struct v4l2_ctrl *continuous_raw_buffer_size;
struct v4l2_ctrl *continuous_viewfinder;
struct v4l2_ctrl *enable_raw_buffer_lock;
......@@ -351,7 +348,6 @@ struct atomisp_sub_device {
struct atomisp_resolution sensor_array_res;
bool high_speed_mode; /* Indicate whether now is a high speed mode */
int pending_capture_request; /* Indicates the number of pending capture requests. */
unsigned int preview_exp_id;
unsigned int postview_exp_id;
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7